Search

Electrical discharge machining (EDM), widely used to fabricate medical devices, is applicable for antibacterial surface protection. Silver, transferred from tool electrode or powder suspended in the dielectric to the modified layer during the EDM process, significantly enhanced antibacterial properties of the modified surface. However, bacterial resistance to silver, which was widespread in clinical, still posed challenges for the modified surfaces containing silver. Zinc, owing to its strong antibacterial effects and no challenge related to Zn-resistant bacteria hitherto reported in clinical, was therefore used as tool electrode material to modify Ti6Al4V surfaces during the EDM process. Discharge energies up to 170 µJ with different polarities were applied in the EDM milling process using deionized water-based dielectric fluid. Results show that discharge energy and polarity play a vital role in chemical composition and roughness of the modified surfaces as well as material removal rate and tool wear rate. The surfaces containing zinc contents up to 28 % can be generated. The use of a low energy generates zinc-rich surfaces with less micro-cracks. The EDM process using zinc tool electrode shows a promising potential for antibacterial surface modification of medical devices. [ABSTRACT FROM AUTHOR]

The medical device market is a high-growth sector expected to sustain an annual growth rate of over 5%, even in developed countries. Daily, numerous patients have medical devices implanted or inserted within their bodies. While medical devices have significantly improved patient outcomes, as foreign objects, their wider use can lead to an increase in device-related infections, thereby imposing a burden on healthcare systems. Multiple materials with significant societal impact have evolved over time: the 19th century was the age of iron, the 20th century was dominated by silicon, and the 21st century is often referred to as the era of carbon. In particular, the development of nanocarbon materials and their potential applications in medicine are being explored, although the scope of these applications remains limited. Technological innovations in carbon materials are remarkable, and their application in medicine is expected to advance greatly. For example, diamond-like carbon (DLC) has garnered considerable attention for the development of antimicrobial surfaces. Both DLC itself and its derivatives have been reported to exhibit anti-microbial properties. This review discusses the current state of DLC-based antimicrobial surface development. [ABSTRACT FROM AUTHOR]

The alternative antibacterial treatment photothermal therapy (PTT) significantly affects oral microbiota inactivation. In this work, graphene with photothermal properties was coated on a zirconia surface using atmospheric pressure plasma, and then the antibacterial properties against oral bacteria were evaluated. For the graphene oxide coating on the zirconia specimens, an atmospheric pressure plasma generator (PGS-300, Expantech, Suwon, Republic of Korea) was used, and an Ar/CH4 gas mixture was coated on a zirconia specimen at a power of 240 W and a rate of 10 L/min. In the physiological property test, the surface properties were evaluated by measuring the surface shape of the zirconia specimen coated with graphene oxide, as well as the chemical composition and contact angle of the surface. In the biological experiment, the degree of adhesion of Streptococcus mutans (S. mutans) and Porphyromonas gingivalis (P. gingivalis) was determined by crystal violet assay and live/dead staining. All statistical analyzes were performed using SPSS 21.0 (SPSS Inc., Chicago, IL, USA). The group in which the zirconia specimen coated with graphene oxide was irradiated with near-infrared rays demonstrated a significant reduction in the adhesion of S. mutans and P. gingivalis compared with the group not irradiated. The oral microbiota inactivation was reduced by the photothermal effect on the zirconia coated with graphene oxide, exhibiting photothermal properties. [ABSTRACT FROM AUTHOR]

The globalization of the market, as well as the increasing world population, which require a higher demand for food products, pose a great challenge to ensure food safety and prevent food loss and waste. In this sense, active materials with antibacterial properties are an important alternative in the prolongation of shelf life and ensuring food safety. In this work, the ability of copper(II) hydroxy nitrate (CuHS) to obtain antibacterial films based on low density polyethylene (LDPE) and polylactic acid (PLA), was evaluated. The thermal properties of the composites, evaluated using thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC), showed that the concentrations of added CuHS do not particularly change these characteristics with respect to the neat polymer matrix films. The mechanical properties, determined using dynamic mechanical analysis (DMTA), indicate a small increase in the brittleness of the material in PLA-based composites. The antibacterial properties against Listeria monocytogenes and Salmonella enterica were evaluated using a surface contact test, and a bacterial reduction of at least 8 to 9 logarithmic units for the composites with 0.3% CuHS, both in LDPE and PLA and against both bacteria, were achieved. The reusability of the composite films after their first use demonstrated a higher stability against Listeria monocytogenes. The migration and cytotoxicity of the composites loaded with 0.3% CuHS was evaluated, demonstrating the safety of these materials, which reinforces their potential use in food packaging applications. [ABSTRACT FROM AUTHOR]

Recent years have seen much attention being given to self-assembly of dipeptide-based structures, especially to self-regulation of dipeptide structures with different amino acid sequences. In this study we investigated the effects of varying solvent environments on the self-assembly of glycine-histidine (Gly-His) dipeptide structures. First we determined the morphological properties of Gly-His films formed in different solvent environments with scanning electron microscopy and then structural properties with Fourier-transform infrared (FTIR) spectroscopy. In addition, we studied the effects of Gly-His films on silver nanoparticle (AgNP) formation and the antioxidant and cytotoxic properties of AgNPs obtained in this way. We also, assessed antibacterial activities of Gly-His films against Gram-negative Escherichia coli and Pseudomonas aeruginosa and Gram-positive Staphylococcus aureus. Silver nanoparticle-decorated Gly-His films were not significantly cytotoxic at concentrations below 2 mg/mL but had antibacterial activity. We therefore believe that AgNP-decorated Gly-His films at concentrations below 2 mg/mL can be used safely against bacteria.

Cyclic N-halamines are highly antimicrobial, very stable, and not susceptible to bacterial resistance. A polysiloxane delivery vehicle was synthesized to deliver cyclic imide N-halamine onto cellulose via a benign and universal procedure that does not require a harmful solvent or chemical bonding. In brief, Knoevenagel condensation between barbituric acid and 4-hydroxybenzaldehyde furnished 5-(4-hydroxybenzylidene)pyrimidine-2,4,6-trione, whose phenolic O−H was subsequently reacted with the Si−H of poly(methylhydrosiloxane) (PMHS) via silane alcoholysis. The product of silane alcoholysis was interpenetrated into cellulose in supercritical CO2 (scCO2) at 50 °C, to form a continuous modification layer. The thickness of the modification layer positively correlated with interpenetration pressure in the experimental range of 10 to 28 MPa and reached a maximum value of 76.5 nm, which demonstrates the ability for tunable delivery, to control the loading of the imide N−H bond originating from barbituric acid unit. The imide N−H bonds on cellulose with the thickest modifier were then chlorinated into N−Cl counterparts using tert-butyl hypochlorite, to exert a powerful biocidability, providing ~7 log reductions of both S. aureus and E. coli in 20 min. The stability and rechargeability of the biocidability were both very promising, suggesting that the polysiloxane modifier has a satisfactory chemical structure and interlocks firmly with cellulose via scCO2 interpenetration. [ABSTRACT FROM AUTHOR]

To prevent implant-associated infections, surface modifications need to be developed that prevent bacterial colonisation and biofilm formation. In the present study, titanium surfaces were processed by nanosecond-pulsed laser ablation to generate a variety of different structures (anatase, rutile, Osteon, as well as Osteon additionally coated with silver and clove nanoparticles). Analysis of adhesion and biofilm formation of the oral pioneer bacterium Streptococcus oralis could demonstrate antibacterial properties of anatase surfaces. For clinical translation, the effect should be enhanced by further adaption and combined with the osseointegrative Osteon structure

Copyright of Archives of Industrial Hygiene & Toxicology / Arhiv za Higijenu Rada I Toksikologiju is the property of Sciendo and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Bacteria in the external environment inevitably invade the wound and subsequently colonize the wound surface during surgery and biomedical operations, which slows down the process of wound healing and tissue repair; this poses a significant threat to human health. Therefore, the development of an intelligent antibacterial surface has become the focus of research in the field of antimicrobial strategies, which has important social and economic significance. Here, we present a simple approach of producing an ionic interaction-driven anionic activation substratum which is then functionalized with cationic molecules through coulombic interactional immobilization. The switchable multifunctional antibacterial surface can decrease bacterial attachment and inactivate the attached microorganisms, thus overcoming the conventional challenge for antibacterial surfaces. Briefly, poly (3-sulfopropyl methacrylate potassium salt) (PSPMA) brushes were constructed by surface-initiated atom transfer radical polymerization on silicon or cotton fabric substrates, and a positive-charged component, namely lysozyme (LYZ), hexadecyl trimethyl ammonium bromide (CTAB) or chitosan (CS), was loaded on negative-charged sulfonate groups through electrostatic interactions. The resultant brush-grafted surfaces exhibited more than ∼95.5% bactericidal efficacy and ∼92.8% release rate after the introduction of an adequate amount of contra-ions (1.0 M; Na+ & Cl−) against both Gram-negative Escherichia coli and Gram-positive Staphylococcus aureus , thus achieving a regenerated surface through the cyclic process of "assembly-dissociation". Smart cotton fabric (Fabric-PSPMA/LYZ and Fabric-PSPMA/CS) surfaces were constructed, which were found to promote wound epidermal tissue regeneration with a higher efficiency after 7-day in vivo studies. This ionic interaction-driven method used in the present work is simple and can reversibly renew antibacterial surfaces, which will help in the wider utilization of switchable antibacterial materials with a more ecologic and economic significance. Smart antibacterial surfaces with renewable characteristics have attracted considerable interests over the past few years. Here, we used ionic interaction-driven force to manipulate dynamic conformational changes in PSPMA surface brushes, accompanied by highly switchable bacteria killing and bacteria releasing behaviors. Different cationic molecules were also designed for assembly/dissociation on the PSPMA-modified surfaces, and the essential parameters, including chemical structures, molecular weight, and cationic charge density, were investigated. With the refined structural combinations and the balance of bacteria killing/bacteria releasing behaviors, smart cotton fabrics (e.g., Fabric-PSPMA/lysozyme and Fabric-PSPMA/chitosan) were designed that could promote wound healing and tissue repair. These results contribute to the fundamental understanding of a switchable cationic-anionic pair design and the corresponding practical, renewable, highly antibacterial fabric. [Display omitted] [ABSTRACT FROM AUTHOR]

Initial microbial attachment on surfaces is the first step in bacteria contamination and direct intervention in the early adhesion stage by constructing an antibacterial coating is an effective strategy to prevent the attachment and proliferation of bacteria. Herein, a storable polyphenol-based coating is designed and fabricated by self-assembling the cationic template and ionic ligand. The materials containing microparticles with sticky properties inherited from tannic can be deposited on various surfaces by a simple redispersion-immersion process. The functional ligands on the outer layer of the coating can kill bacteria by combining chemical damages produced by tannic as well as mechanical disruption caused by the micro-nano topography as reflected by the elevated Young's modulus and differentiated stiffness of the bacterial membrane. The results reveal a simple method to prepare polyphenol-based antibacterial coatings and enrich our understanding of the combined use of chemical and mechanical interventions to enhance the antibacterial activity. [ABSTRACT FROM AUTHOR]

Abstract Antibacterial surfaces coated with nanomaterials, including silver nanoparticles, are considered effective alternative antimicrobial agents that can be used instead of antibiotics and chemical agents. However, reports of the potential toxicity of these materials raise questions about the safety of their use in biomedical applications. The objective of this research was to reduce the human cell cytotoxicity of silver nanoparticle-coated polyurethane foils by complexing silver nanoparticles with graphene oxide. The antimicrobial activity of nanoplatforms coated with silver nanoparticles, graphene oxide and the composite of silver nanoparticles and graphene oxide was assessed with Salmonella enteritidis. Cytotoxicity was analysed by an analysis of the viability and morphology of human fibroblasts, human umbilical vein endothelial cells (HUVECs) and chicken embryo chorioallantoic membrane. Additionally, the synthesis level of inflammatory proteins was examined for fibroblasts cultured on different nanoplatforms. The nanoplatform coated with the silver nanoparticles and graphene oxide composite showed strongest antibacterial properties, although nanoplatforms coated with only silver nanoparticles or graphene oxide also resulted in decreased S. enteritidis growth. Furthermore, a nanoplatform coated with silver nanoparticles and graphene oxide composite showed limited immunological stimulation and significantly reduced cytotoxicity towards fibroblasts, HUVECs and chicken embryo chorioallantoic membrane in comparison to the nanoplatform coated only with silver nanoparticles, due to the higher stability of the nanomaterials in the nanocomposite.

The globalization of the market and the increase of the global population that requires a higher demand of food products superimposes a big challenge to ensure food safety. In this sense, a common strategy to extend the shelf life and save life of food products is by avoiding bacterial contamination. For this, the development of antibacterial contact surfaces is an urgent need to fulfil the above-mentioned strategy. In this work, the role of MXene (Ti3C2Tx) in providing antibacterial contact surfaces was studied through the creation of composite films from polylactic acid (PLA), as the chosen polymeric matrix. The developed PLA/MXene films maintained the thermal and mechanical properties of PLA and also presented the attractive antibacterial properties of MXene. The composites’ behaviour against two representative foodborne bacteria was studied: Listeria mono-cytogenes and Salmonella enterica (representing Gram-positive and Gram-negative bacteria, respectively). The composites prevented bacterial growth, and in the case of Listeria only 0.5 wt.% of MXene was necessary to reach 99.9999% bactericidal activity (six log reductions), while against Salmonella, 5 wt.% was necessary to achieve 99.999% bactericidal activity (five log reductions). Cy-totoxicity tests with fHDF/TER166 cell line showed that none of the obtained materials were cytotoxic. These results make MXene particles promising candidates for their use as additives into a polymeric matrix, useful to fabricate antibacterial contact surfaces that could prove useful for the food packaging industry.

[Display omitted] Hydrophobic micro-porous membrane such as polyvinylidene fluoride (PVDF) with excellent thermal-/chemical-stability and low surface energy has received extensive attention in industrial water treatment and sustainable energy conversion. However, undesirable contaminants caused by inevitable proteins or microorganisms adhesion may lead to a rapid loss of separation efficiency, which significantly deteriorate their porous structures and eventually limit their practical performance. Herein, we present a scalable approach for fabricating comb-like copolymer modified PVDF membranes (PVDF-PN@AgNPs) that prevent bacteria from proliferating on the surface and temperature-controlled release of adhered contaminants. Comb-like structured copolymers were imparted to a polydopamine (PDA)-treated PVDF membrane by Michael addition reaction, which enabled a covalent binding of comb-like structured copolymers to the membrane. Such unique structural design of grafted copolymer, containing hydrophilic side chain and temperature-responsive chain backbone, stably prevents bacteria adhesion and provides reversible surface wettability. Therefore, the resultant membranes were evaluated to prevent bacterial adhesion, high touch-killing efficiency and temperature-controlled contaminants release (~99% of protein and ~75% of bacteria). Moreover, with the collapse and stretch of grafted copolymer chain backbone, the synthetic membrane further reversibly adjusted inner micro-porous structure and surface wettability, which eventually helped to achieve variable water fluid transport efficiency. This study not only provides a feasible structural design for stably coping with the challenging of antifouling and subsequent contamination adhesion of PVDF membrane, but also potentially answers the significant gap between lab research advances and practical application, particularly in the industrial membrane field. [ABSTRACT FROM AUTHOR]

Abstract Background Due to the increased emergence of antimicrobial resistance, alternatives to minimize the usage of antibiotics become attractive solutions. Biophysical manipulation of material surface topography to prevent bacterial adhesion is one promising approach. To this end, it is essential to understand the relationship between surface topographical features and bactericidal properties in order to develop antibacterial surfaces. Results In this work a systematic study of topographical effects on bactericidal activity of nanostructured surfaces is presented. Nanostructured Ormostamp polymer surfaces are fabricated by nano-replication technology using nanoporous templates resulting in 80-nm diameter nanopillars. Six Ormostamp surfaces with nanopillar arrays of various nanopillar densities and heights are obtained by modifying the nanoporous template. The surface roughness ranges from 3.1 to 39.1 nm for the different pillar area parameters. A Gram-positive bacterium, Staphylococcus aureus, is used as the model bacterial strain. An average pillar density at ~ 40 pillars μm−2 with surface roughness of 39.1 nm possesses the highest bactericidal efficiency being close to 100% compared with 20% of the flat control samples. High density structures at ~ 70 pillars μm−2 and low density structures at

La inclusión del cobre como material antibacteriano en la arquitectura sanitaria ayuda a resolver la gran paradoja que existe en los servicios asistenciales; entrar a servicios de salud para sanarse de una enfermedad puntual y adquirir enfermedades de riesgo de muerte. Esta investigación demuestra la eficacia del cobre en formato laminar en vez de sólido, haciendo mediciones de con luminometría, abriendo un camino factible para el cobre como revestimiento antibacteriano y dotando de su propiedad antibacteriana superficial a costos reducidos, sin necesidad de cambios de mobiliario ni obras Abstract The inclusion of copper as an antibacterial material in health architecture helps to solve the great paradox that exists in healthcare services; enter health services to heal from a specific illness and acquire life-threatening diseases. This research demonstrates the effectiveness of copper in laminar format instead of solid, making measurements of ATP with luminometry, opening a feasible way for copper as an antibacterial coating and endowing its superficial antibacterial property at reduced costs, without the need for furniture changes or works.

Nowadays, copper is a widely used metal worldwide for various applications such as electronic materials, electrical circuits, ornamentals and decorative applications. Copper is widely known for its antimicrobial properties. Despite this fact, it is found to be susceptible to biocorrosion. To protect the copper metal from biocorrosion, hydrophobically modified silica nanoparticles were prepared by the sol gel process. The Prepared sol solution was characterized by Particle size analysis, transmission electron microscopy (TEM) and infrared spectroscopy. Modified silica nanoparticles coated on the copper substrate to obtain superhydrophobic surface. Surface morphology was observed by scanning electron microscopy (SEM), electron dispersive microscopy (EDX) and atomic force microscopy analysis (AFM). Wettability and antimicrobial activity of the copper surface were also studied. The average particle size was found to be 96 nm and the formation of silica nanoparticle in the sol was also confirmed by IR spectra. The Contact angle of coated copper was found 163.3˚compared to 66.6˚ of uncoated copper surface which confirms the superhydrophobic behavior of the coated surface. The presence of nanostructured surfaces was responsible for superhydrophobic behavior which was confirmed by SEM and AFM studies. The coated copper showed excellent antimicrobial characteristics against E-coli. [Display omitted] [ABSTRACT FROM AUTHOR]

In the present work, the effect of graphene oxide (GO) nanosheets on the antibacterial activity of CuO nanowire arrays under visible light irradiation is shown. A combined thermal oxidation/electrophoretic deposition technique was employed to prepare three-dimensional networks of graphene oxide nanosheets hybridized with vertically aligned CuO nanowires. With the help of standard antibacterial assays and X-ray photoelectron spectroscopy, it is shown that the light-activated antibacterial response of the hybrid material against gram-negative Escherichia coli is significantly improved as the oxide functional groups of the GO nanosheets are reduced. In order to explore the physicochemical mechanism behind this behavior, ab-initio simulations based on density functional theory were performed and the effect of surface functional groups and hybridization were elucidated. Supported by the experiments, a three-step photo-antibacterial based mechanism is suggested: (i) injection of an electron from CuO into rGO, (ii) localization of the excess electron on rGO functional groups, and (iii) release of reactive oxygen species lethal to bacteria. Activation of new photoactive and physical mechanisms in the hybrid system makes rGO-modified CuO nanowire coatings as promising nanostructure devices for antimicrobial applications in particular for dry environments. [ABSTRACT FROM AUTHOR]

Nanostructured surfaces can be engineered to kill bacteria in a contact-dependent manner. The study of bacterial interactions with a nanoscale topology is thus crucial to developing antibacterial surfaces. Here, a systematic study of the effects of nanoscale topology on bactericidal activity is presented. We describe the antibacterial properties of highly ordered and uniformly arrayed cotton swab-shaped (or mushroom-shaped) nanopillars. These nanostructured surfaces show bactericidal activity against Staphylococcus aureus and Pseudomonas aeruginosa. A biophysical model of the cell envelope in contact with the surface, developed ab initio from the infinitesimal strain theory, suggests that bacterial adhesion and subsequent lysis are highly influenced by the bending rigidity of the cell envelope and the surface topography formed by the nanopillars. We used the biophysical model to analyse the influence of the nanopillar cap geometry on the bactericidal activity and made several geometrical alterations of the nanostructured surface. Measurement of the bactericidal activities of these surfaces confirms model predictions, highlights the non-trivial role of cell envelope bending rigidity, and sheds light on the effects of nanopillar cap architecture on the interactions with the bacterial envelope. More importantly, our results show that the surface nanotopology can be rationally designed to enhance the bactericidal efficiency.

The effective and widely tested biocides: Benzalkonium chloride, bronopol, chitosan, chlorhexidine and irgasan were added in different concentrations to atelocollagen matrices. In order to assess how these antibacterial agents influence keratinocytes cell growth, cell viability and proliferation were determined by using MTT assay. Acquired data indicated a low toxicity by employing any of these chemical substances. Furthermore, cell viability and proliferation were comparatively similar to the samples where there were no biocides. It means that regardless of the agent, collagen-cell-attachment properties are not drastically affected by the incorporation of those biocides into the substrate. Therefore, these findings suggest that these atelocollagen substrates enhanced by the addition of one or more of these agents may render effectiveness against bacterial stains and biofilm formation, being the samples referred to herein as “antimicrobial substrates” a promising view in the design of novel antimicrobial biomaterials potentially suitable for tissue engineering applications.

The aim of this work was to use electrospray to create photocatalytic TiO 2 coatings and to study their antibacterial and antibiofilm capacity. The electrospray used a sol of TiO 2 anatase nanoparticles prepared by a sol–gel method, which formed stable suspensions of positively charged particles (ζ-potential + 22.3 ± 3.7 mV). The electrospray deposited TiO 2 on non-porous glass surfaces at two loading densities originating homogeneous coatings (3.2–4.3 µm) of particles the top layer of which displayed aggregates ranging from the micron scale to a few hundreds of nanometers, with lower size as TiO 2 loading increased. TiO 2 -functionalized surfaces were tested for the inactivation of the Gram-positive bacterium Staphylococcus aureus . The electrosprayed surface was moderately hydrophilic turning highly hydrophilic upon irradiation (water contact angle 9.6° after 15 h under Xe-arc lamp). photocatalytic surfaces were put in contact with exponentially growing bacterial cultures in a flow system in which solar simulated irradiation followed two different 24 h dark-light arrangements with 9 or 18 h dark exposure followed by 15 or 6 h irradiation. The electrosprayed surfaces experienced extensive colonization by viable bacteria and clear biofilm formation revealed by exopolysaccharide matrix visualization. Using both dark-light cycles all cells became non-viable with extensive membrane damage. Biofilm matrix measurements showed that the irradiated surfaces were essentially free of bacterial exopolysaccharide matrix for specimens with the higher TiO 2 loading density. The biofilm removal reached 99% and no regrowth of viable cells was observed in any case. The results showed that TiO 2 -electrospray can avoid biofilm accumulation under stringent environmental conditions. [ABSTRACT FROM AUTHOR]

Sophorolipids are bioderived glycolipids displaying interesting antimicrobial properties. We show that they can be used to develop biocidal monolayers against Listeria ivanovii, a Gram-positive bacterium. The present work points out the dependence between the surface density and the antibacterial activity of grafted sophorolipids. It also emphasizes the broad spectrum of activity of these coatings, demonstrating their potential against both Gram-positive strains ( Enteroccocus faecalis, Staphylococcus epidermidis, Streptococcus pyogenes) and Gram-negative strains ( Escherichia coli, Pseudomonas aeruginosa and Salmonella typhymurium ). After exposure to sophorolipids grafted onto gold, all these bacterial strains show a significant reduction in viability resulting from membrane damage as evidenced by fluorescent labelling and SEM-FEG analysis. [ABSTRACT FROM AUTHOR]

Antibacterial polyolefins surfaces, combining biocidal and antiadhesive properties, were elaborated by a covalent grafting of antimicrobial peptides (AMPs), able to kill adherent bacteria, on a pre-immobilized hyaluronic acid (HA) layer, able to repel the micro-organisms. Different HA activation rate for its immobilization, were used to change HA layer morphology and number of residual free carboxylic acid functions for AMPs grafting. Based on adhesion tests on Staphylococcus epidermidis and microscopy fluorescent observations, the presence of the two combined properties was shown to be depended on the HA activation rate. Thus, the best addition effect was observed for an AMP grafting on a surface based on a high HA activation, data pointing out a decrease of the bacterial adhesion up to 99.8% and a perturbation of the bacterial membrane integrity of adhered bacteria. On the contrary, a decrease of the antibacterial activity was observed for an AMP grafting on a surface based on a low HA activation. [ABSTRACT FROM AUTHOR]

Five different Ag dots arrays (16 to 400 dots/mm 2 ) were fabricated on a continuous platinum, palladium, or iridium thin film and for comparison also on titanium film by sputter deposition and photolithographic patterning. To analyze the antibacterial activity of these microstructured films Staphylococcus aureus ( S. aureus ) were placed onto the array surfaces and cultivated overnight. To analyze the viability of planktonic as well as surface adherent bacteria, the applied bacterial fluid was subsequently aspirated, plated on blood agar plates and adherent bacteria were detected by fluorescence microscopy. A particular antibacterial effect towards S. aureus was induced by Ag dot arrays on each of the platinum group thin film (sacrificial anode system for Ag) in contrast to Ag dot arrays fabricated on the Ti thin films (non-sacrificial anode system for Ag). Among platinum group elements the Ir-Ag system exerted the highest antibacterial activity which was accompanied by most advanced dissolution of the Ag dots and Ag ion release compared to Ag dots on Pt or Pd. [ABSTRACT FROM AUTHOR]

The relationship between microbe populations that are active on engineered-product surfaces and their relationship to surface corrosion or human health is increasingly being recognized by the materials engineering community as a critically important study-direction. Microbial contamination from biofilms and germ colonies leads to costs that are reported to be extremely high every year in infection control, epidemics, corrosion loss and energy/infrastructure materials loss throughout the world. Nanostructured surfaces, particularly those that are hard-surface nanoporous (pore radii between 2 and 1000 nm), are an emerging class of surfaces that have recently been recognized as important for the prevention of microbial colony growth and biofilm formation. Such nanostructured/nanoporous surfaces, whether made with deposited nanoparticles (welded nanoparticles), or formed by ion-assisted growth on a surface have been found to display biocidal activity with varying efficacy that depends on both the microbe and the nanosurface features. The rate of mortality from common pathogens that are resident in ubiquitous bio-films when attached to common engineering surfaces made of steels, titanium and zirconium appears to be increasing. In this short review, we look at methods of manufacture of durable (i.e., highly scratch resistant) nanostructuring on commonly used engineering surfaces. The microstructures, energy dispersive X-ray analysis, X-ray photo-electron spectroscopy and other types of characterization of a few such surfaces are presented. Simple tests are required by the surface engineering community for understanding the efficacy of a surface for antimicrobial action. These are reviewed. The surface drying rate and the dynamics of the droplet spread have been proposed in the literature as quick methods that correlate well with the residual antimicrobial activity efficacy even after some surface abrasion of the nanostructured surface. A categorization of a surface against short-term antimicrobial action and long-term action is proposed in this review article. Test periods that span time-frames greater than 5 years have demonstrated a high efficacy of the nanoporous nanostructures for preventing bio-film formation. New comparative results for diamond- and graphite-containing surfaces are presented. A brief discussion on a recently developed plasma application technique for creating durable nanoporous surfaces is presented. Although considerable information is now available regarding tunable surface nanofeatures for antimicroabial efficacy, there is a need for more research activity, particularly directed toward the low cost manufacture and rapid characterization of durable (wear and chemical resistant) surfaces that display permanent antimicrobial behavior. [ABSTRACT FROM AUTHOR]

In this work laser micro polishing (LMP) of cold rolled 0.3 mm thick 304 stainless steel with a pulsed fibre laser is studied, for applications where antibacterial properties are required. Due to its production method, the initial surface roughness of the tested material was considerably low (Sa=85.3±2.8 μm), rendering a demanding case for the laser polishing process. Accordingly, process feasibility under three different atmospheric conditions, namely ambient, Ar and N 2 atmosphere, was investigated. A large set of process parameter combinations was tested and initial analysis was carried out to identify the polishing feasibility by inspection under an optical microscope. Once the feasibility window was determined, a primary characterization was made on selected surfaces for roughness and waviness. Results show that in some process conditions belonging to the explored feasibility range, surface roughness could be decreased by 50%. [ABSTRACT FROM AUTHOR]

Insects and plants exhibit bactericidal properties through surface nanostructures, such as nanospikes, which physically kill bacteria without antibiotics or chemicals. This is a promising new avenue for achieving antibacterial surfaces. However, the existing methods for fabricating nanospikes are incapable of producing uniform nanostructures on a large scale and in a cost-effective manner. In this paper, a scalable nanofabrication method involving the application of nanosphere lithography and reactive ion etching for constructing nanospike surfaces is demonstrated. Low-cost silicon nanospikes with uniform spacing that were sized similarly to biological nanospikes on cicada wings with a 4-inch wafer scale were fabricated. The spacing, tip radius, and base diameter of the silicon nanospikes were controlled precisely by adjusting the nanosphere diameters, etching conditions, and diameter reduction. The bactericidal properties of the silicon nanospikes with 300 nm spacing were measured quantitatively using the standard viability plate count method; they killed E. coli cells with 59 % efficiency within 30 h. The antibacterial ability of the nanospike surface was further indicated by the morphological differences between bacteria observed in the scanning electron microscopic images as well as the live/dead stains of fluorescence signals. The fabrication process combined the advantages of both top-down and bottom-up methods and was a significant step toward affordable bio-inspired antibacterial surfaces. [Display omitted] • A hybrid method combining top-down reactive ion etching and bottom-up nanosphere lithography for producing silicon nanospikes. • Kill E. Coli physically without using antibiotics by disrupting bacterial membranes. • Provide well-controlled silicon nanospikes geometry in a 4-inch wafer scale in a low-cost fashion. [ABSTRACT FROM AUTHOR]

An innovative multi-layer coating comprising a bioactive compound layer (consisting of hydroxyapatite and calcium titanate) with an underlying titanium oxide layer (in the form of anatase and rutile) has been developed on Grade 4 quality commercially pure titanium via a single step micro-arc oxidation process. Deposition of a multi-layer coating on titanium enhanced the bioactivity, while providing antibacterial characteristics as compared its untreated state. Furthermore, introduction of silver (4.6 wt.%) into the multi-layer coating during micro-arc oxidation process imposed superior antibacterial efficiency without sacrificing the bioactivity. [ABSTRACT FROM AUTHOR]

Ten different Ag dot arrays (16 to 625 microstructured dots per square mm) were fabricated on a continuous Au thin film and for comparison also on Ti film by sputter deposition and photolithographic patterning. To analyze the antibacterial activity of these microstructured films Escherichia coli and Staphylococcus aureus were placed onto the array surfaces and cultivated overnight. To analyze the viability of planktonic as well as surface adherent bacteria, the applied bacterial fluid was subsequently aspirated, plated on blood agar plates and adherent bacteria were detected by fluorescence microscopy. A particular antibacterial effect towards both bacterial strains was induced by Ag dot arrays on fabricated Au thin film (sacrificial anode system for Ag), due to the release of Ag ions from dissolution of Ag dots in contrast to Ag dot arrays fabricated on the Ti thin films (non-sacrificial anode system for Ag) which remained intact to the original dot shape. The required number of Ag dots on gold film to achieve complete bactericidal effects for both bacterial strains was seven times lower than that observed with Ag dot arrays on Ti film. [ABSTRACT FROM AUTHOR]

Infection is the most common factor that leads to dental titanium implant failure. Antibacterial implant surfaces based on nano-scale modifications of the titanium appear as an attractive strategy for control of peri-implantitis. In the present work, the preparation and antibacterial properties of a novel composite coating for titanium based on nanoporous silica and silver nanoparticles are presented. Starch-capped silver nanoparticles (AgNPs) were synthesized and then incorporated into sol–gel based solution system. The AgNP-doped nanoporous silica coatings were prepared on titanium surface using a combined sol–gel and evaporation-induced self-assembly (EISA) method. The coating nanostructure was characterized by XRD, SEM–EDX, and HR-TEM. Antibacterial activity was evaluated against Aggregatibacter actinomycetemcomitans , a representative pathogen of dental peri-implantitis. Colony-forming units (CFUs) were counted within the biofilm and at the planktonic state. Biofilm development was quantified using crystal violet staining and viability of adherent bacteria was confirmed with the Live/Dead fluorescence assay. Silica-based composite coating containing AgNPs (AgNP/NSC) was prepared on titanium surface by direct incorporation of AgNP suspension into the sol–gel system. The self-assembly technique enabled the spontaneous formation of a highly ordered nanoporosity in the coating structure, which is a desired property for osseointegration aspects of titanium implant surface. AgNP/NSC coating produces a strong antibacterial effect on titanium surface by not only killing the adherent bacteria but also reducing the extent of biofilm formation. Biofilm survival is reduced by more than 70% on the AgNP/NSC-modified titanium surface, compared to the control. This antibacterial effect was verified for up to 7 days of incubation. The long-term antibacterial activity exhibited by the nanostructured AgNP/NSC-titanium surface against A. actinomycetemcomitans suggests that this type of nano-scale surface modification is a promissory strategy to control infections associated with dental implant rehabilitation. [ABSTRACT FROM AUTHOR]

The effective and widely tested biocides: Benzalkonium chloride, bronopol, chitosan, chlorhexidine and irgasan were added in different concentrations to atelocollagen matrices. In order to assess how these antibacterial agents influence keratinocytes cell growth, cell viability and proliferation were determined by using MTT assay. Acquired data indicated a low toxicity by employing any of these chemical substances. Furthermore, cell viability and proliferation were comparatively similar to the samples where there were no biocides. It means that regardless of the agent, collagen-cell-attachment properties are not drastically affected by the incorporation of those biocides into the substrate. Therefore, these findings suggest that these atelocollagen substrates enhanced by the addition of one or more of these agents may render effectiveness against bacterial stains and biofilm formation, being the samples referred to herein as "antimicrobial substrates" a promising view in the design of novel antimicrobial biomaterials potentially suitable for tissue engineering applications. [ABSTRACT FROM AUTHOR]

The adhesion of pathogenic bacteria and the consequent formation of biofilms on biomedical materials and devices continue to be a significant concern in biomedical applications. Thus, it is critical to design antibacterial surfaces that limit bacterial adhesion and biofilm formation. The current study effectively fabricates a universal dual-functional antibacterial film with antifouling and photothermal bactericidal activity using a simple and ecologically friendly sequential deposition of polydopamine (PDA) layer and phase-transited bovine serum albumin (PTB) film. Because of the excellent antifouling characteristic of PTB film, hybrid surfaces can resist the initial attachment of majority of bacteria, however, a small number of bacteria adhering to the surface will be killed by near-infrared (NIR) irradiation due to the excellent photothermal effect of PDA layer. Compared to single-functional antibacterial surfaces with either antifouling or bactericidal qualities, this dual-functional surface demonstrated superior antibacterial performance and antibiofilm ability. Additionally, the hybrid surface can be utilized for many substrata despite the surface chemistry or topography. It exhibits negligible cytotoxicity and high histocompatibility, presenting a novel approach to eliminate surface-attached bacteria occurring in various healthcare applications. [ABSTRACT FROM AUTHOR]

Protonable polyethyleneimine (PEI) and citric acid (CA) based C-dots were prepared via a hydrothermal process, yielding particles with a hydrodynamic diameter of ~100 and ~80 nm, and zeta potential of − 2.3 ± 0.1 and + 23.4 ± 0.2 mV for PEI-CA C-dots and their protonated form, respectively. Treating Staphylococcus aureus with these C-dots resulted in a statistically significant reduction in bacterial growth, specifically growth in the planktonic phase as well as in the development of bacterial biofilm when compared to untreated (p < 0.05). When 24 h matured S. aureus biofilms were treated with C-dots, a significant disruption and dispersion of bacteria from the existing biofilms was noted as compared to untreated (p < 0.05). Other Gram-positive microorganisms (B. cereus, S. epidermidis, S. pyogenes) and Gram-negative (P. mirabilis, E. coli, and P. aeruginosa) were also susceptible to the antimicrobial activity of the PEI-CA C-dots with significant inhibition of bacterial growth noted for all organisms after C-dot treatment. Only for B. cereus, S. epidermidis, and P. aeruginosa was this reduction in total growth reflected in decreased planktonic growth. However, biofilm formation by all organisms was reduced significantly upon treatment with the C-dots, including those for which planktonic growth was not impacted. [Display omitted] • Fluorescent N-doped C-dots can be readily prepared via a facile solvothermal method. • Positively charged N-doped C-dots are effective as anti-biofilm agents. • C-dots successfully inhibit bacterial proliferation in the planktonic growth phase. • C-dots stop biofilm formation by several bacteria and disrupt established biofilms. [ABSTRACT FROM AUTHOR]