Search

This paper presents measurements of Radar Cross Section (RCS) of five Unmanned Aerial Vehicles (UAVs), comprising both consumer grade and professional small drones, collected in a semi-controlled environment as a function of azimuth aspect angle, polarization and frequency in the range 8.2-18 GHz. The experimental setup and the data pre-processing, which include coherent background subtraction and range gating procedures, are illustrated in detail. Furthermore, a thorough description of the calibration process, which is based on the substitution method, is discussed. Then, a first-order statistical analysis of the measured RCSs is provided by means of the Cramér-von Mises (CVM) distance and the Kolmogorov-Smirnov (KS) test. Finally, radar detection performance is assessed on both measured and bespoke simulated data (leveraging the results of the developed statistical analysis), including, as benchmark terms, the curves for non-fluctuating and Rayleigh fluctuating targets.

This paper deals with Radar Cross Section (RCS) measurements of five small Unmanned Aerial Vehicles (UAVs) in a semi-controlled environment as a function of azimuth aspect angle, polarization, and frequency in the range 8.2-18 GHz. The experimental setup and the data pre-processing, which include coherent background subtraction, range gating procedures, and calibration, are presented. Then, a thorough statistical analysis of the measured RCSs is provided by means of the Cram´er–von Mises (CVM) distance and the Kolmogorov–Smirnov (KS) test.

Staring radars use a transmitting static wide-beam antenna and a directive digital array to form multiple simultaneous beams on receive. Because beams are fixed, the radar can employ long integration times to detect slow low-RCS targets, such as drones, which present a challenge to traditional air surveillance radar. The use of multiple spatially separated receivers cooperating with the staring transmitters in a multistatic network allows multi-perspective target acquisitions that can help mitigate interference and ultimately enhance the detection of drones and reduce estimation errors. Here, the development and experimental results of a passive, dual-channel, L-band receiver are presented. The receiver has been used to take measurements of both moving vehicles of drones in flight using a bistatic staring transmitter. An analysis of the receiver is presented using GPS is used to quantify the estimation performance of the receiver.

This paper presents measurements of Radar Cross Section (RCS) of five Unmanned Aerial Vehicles (UAVs), comprising both consumer grade and professional small drones, collected in a semi-controlled environment as a function of azimuth aspect angle, polarization and frequency in the range 8.2-18 GHz. A first-order statistical analysis of the measured RCSs is firstly reported prior to assessing the radar detection performance on both measured and bespoke simulated data (leveraging the results of the developed statistical analysis), including, as benchmark terms, the curves for non-fluctuating and Rayleigh fluctuating targets.

Nano-drones, are insect-like sized drones with a threat capability of intrusion to provide intelligence and potentially violate secure establishments and public privacy rights. They are an existing technology which is becoming increasingly more available, portable, affordable and easy to operate. As such, they represent a plausible defence and security threat. In this paper, a setup is presented that is used to measure the 3-dimensional Radar Cross Section (RCS) of a nano-drone for three elevation planes with a 5-degree resolution step in azimuth and elevation. The results presented in this paper are unique because there has been very little work, if any, in the existing literature attempting to measure the RCS of such small drones. They are also key to inform further work investigating the development of nano-drone detection radar systems as well as nano-drone detection and classification signal processing solutions.

Staring radars use a transmitting static wide-beam antenna and a directive digital array to form multiple simultaneous beams on receive. Because beams are fixed, the radar can employ long integration times to detect slow low-RCS targets, such as drones, which present a challenge to traditional air surveillance radar. The use of multiple spatially separated receivers cooperating with the staring transmitters in a multistatic network allows multi-perspective target acquisitions that can help mitigate interference, such as signal multipath, and ultimately enhance the detection of drones and reduce target parameter estimation errors. Here, the design of a dual-channel receiver prototype for use in a multistatic cooperative network is presented. Several measurements have been taken using the prototype receiver in a bistatic configuration to test and assess its performance.

The algorithm proposed in this paper jointly selects the transmitted waveform and the control input so that a radar sensor on a moving platform can prosecute a target by minimising a predefined cost that accounts for the energy of the transmitted radar signal, the energy of a platform control input and the relative position error between the platform and the target. The cost is a function of the waveform design and control input. The algorithm extends the existing Joint Waveform Guidance and Control Optimization (JWGCO) solution to nonlinear equations to account for the dependency of the radar measurement accuracies on Signal to Noise Ratio (SNR) and, as a consequence, on the target position. The performance of the proposed solution based on statistical linearisation is assessed with a set of simulations for a pulsed Doppler radar transmitting linearly frequency modulated chirps.

The concept of a traditional monostatic radar with co-located transmit and receive antennas naturally imposes performance limits that can adversely impact applications. Using a multiplicity of transmit and receive antennas and exploiting spatial diversity provides additional degrees of design freedom that can help overcome such limitations. Further, when coupled with cognitive signal processing, such advanced systems offer significant improvement in performance over their monostatic counterparts. This will also likely lead to new applications for radar sensing. In this paper we explore the fundamentals of multistatic network radar highlighting both potential and constraints whilst identifying future research needs and applications. Initial experimental results are presented for a 2-node networked staring radar.

Understanding the decision-making process of deep learning networks is a key challenge that has rarely been investigated for synthetic aperture radar (SAR) images. In this article, a set of new analytical tools is proposed and applied to a convolutional neural network (CNN) handling automatic target recognition on two SAR datasets containing military targets. First, an analysis of the respective influence of target, shadow, and background areas on classification performance is carried out. The shadow appears to be the least used portion of the image affecting the decision process, compared to the target and clutter, respectively. Second, the location of the most influential features is determined with classification maps obtained by systematically hiding specific target parts and registering the associated classification rate relative to the images to be classified. The location of the image areas without which classification fails is target type and orientation specific. Nonetheless, a strong contribution of specific parts of the target, such as the target top and the areas facing the radar, is noticed. Finally, results show that features are increasingly activated along the CNN depth according to the target type and its orientation, even though target orientation is absent from the loss function.

Radars monitoring small targets often must increase their integration times to achieve sufficient signal-to-noise ratio (SNR) for maintaining a viable track. These longer integation times can prevent micro-Doppler signature extraction and instead result in Doppler signatures consisting of spectral lines to the radar's higher-level processing. Whether the radar operates in the micro-Doppler or spectral line regime depends on both radar parameters (e.g. waveforms, wavelengths and integration times) as well as target parameters (e.g. rotor length, rotational frequency, target reflectivity and geometry). Additionally, understanding the transition region between these regimes can further aid target recognition algorithms. This paper uses modelling, simulations and experimental data to refine the understanding of how a particular radar will observe a target Doppler signature in either of these regimes, highlighting the transition region between the two.

Nano-drones, are insect-like size drones with a capability of intrusion to provide intelligence and potentially violate secure establishments and public privacy rights. Nano-drones are already an existing technology which is becoming more and more available, portable, affordable and easily operated. As such, they may soon become a plausible defence and security threat. This paper presents the design and development of a K-Band FMCW radar prototype for nano-drone detection. The FMCW radar prototype consists of connectorised components operating at a carrier frequency of 24 GHz and offer high parameter selection flexibility. Experiments have been carried out in order to evaluate the system performance. Results show that a small Arcade PICO Drone Nano Quadcopter (smaller than 5 cm) could be detected, and that its micro-Doppler signature could be extracted from data.

Staring radars use a transmitting static wide-beam antenna and a directive digital array to form multiple simultaneous beams on receive. Because beams are static, the radar can employ long integration times that facilitate the detection of slow low-RCS targets, such as drones, which present a challenge to traditional air surveillance radar. Typical low altitude trajectories employed by drones often result in low-grazing angle multipath effects which are difficult to mitigate with a monostatic radar alone. The use of multiple spatially separated receivers cooperating with the staring transmitters in a multistatic network allows multi-perspective target acquisitions that can help mitigate multipath and ultimately enhance the detection of drones. This paper investigates how varying the network geometry affects the estimation performance of a targets position and velocity in a multipath free scenario. The optimal geometry is found by minimising the trace of the Cramer-Rao Lower Bound (CRLB) of the Maximum Likelihood (ML) estimates of range and Doppler using the Coordinate Descent (CD) algorithm. The network estimation accuracy performance is verified using Monte Carlo simulations and an ML Estimator on the target parameter estimates.

Multibeam radars (MBRs) enable multiple independent channels by simultaneously exploiting spatial and waveform diversity. Orthogonal waveforms are employed to form multiple independent antenna beams, each one providing a different function and using different dedicated radar resources. This paper investigates sidelobe levels in MBRs and presents a comparison with those of an Electronic Steerable Array (ESA) that employs a single waveform in transmission to generate multiple simultaneous beams. Simulations are carried out for a 3-channel MBR transmitting quasi-orthogonal Linear Frequency Modulated (LFM) waveforms at Ku band. The response of the MBR to an ideal point target as a function of aspect angle as well as that to multiple targets in different locations has been investigated. Results corroborate the analytical findings and show that the sidelobe levels with respect to angle, at the target range, are attenuated by the cross-ambiguity function properties between the waveforms employed. The range response to a target in low channel isolation suffers from cross-channel interference that may alter the noise floor characteristics of the radar, hence stressing the importance of suitable waveform selection.

Detection and classification of nano-targets (less than 5 cm in size) are becoming important technical challenges as nano-targets are largely invisible to conventional radar. Nano-drones, for example, may soon become a tangible threat capable of providing short-range stealthy surveillance. Similarly, insect pests are posing a significant agricultural risk by causing crop losses and subsequently reducing the yields. Frequency Modulated Continuous Wave (FMCW) radar is a technology that can provide short-range detection, with no blind range and very high resolution, at a relatively low cost. This paper presents the latest results of an ongoing project aiming at designing and developing a low-cost and bespoke 24 GHz FMCW radar prototype to enable detection of nano-targets and extract their Doppler signatures. A home-brew S-band FMCW radar prototype has been initially designed and developed, using off-the-shelf components, to demonstrate the feasibility of our proposed design solution and inform all future activities at 24 GHz. Several experiments have been carried out to test the S-band prototype and assess its performance against larger drones and cars. Results have shown targets could be successfully detected and their micro-Doppler signatures extracted using Short-Time Fourier Transform (STFT) techniques.

Synthetic aperture radar (SAR) images for automatic target classification (automatic target recognition (ATR)) have attracted significant interest as they can be acquired day and night under a wide range of weather conditions. However, SAR images can be time consuming to analyse, even for experts. ATR can alleviate this burden and deep learning is an attractive solution. A new deep learning Pose-informed architecture solution, that takes into account the impact of target orientation on the SAR image as the scatterers configuration changes, is proposed. The classification is achieved in two stages. First, the orientation of the target is determined using a Hough transform and a convolutional neural network (CNN). Then, classification is achieved with a CNN specifically trained on targets with similar orientations to the target under test. The networks are trained with translation and SAR-specific data augmentation. The proposed Pose-informed deep network architecture was successfully tested on the Military Ground Target Dataset (MGTD) and the Moving and Stationary Target Acquisition and Recognition (MSTAR) datasets. Results show the proposed solution outperformed standard AlexNets on the MGTD, MSTAR extended operating condition (EOC)1, EOC2 and standard operating condition (SOC)10 datasets with a score of 99.13% on the MSTAR SOC10.

Echolocating bats have evolved the ability to detect, resolve and discriminate targets in highly challenging environments using biological sonar. The way bats process signals in the receiving auditory system is not the same as that of radar and sonar and hence investigating differences and similarities might provide useful lessons to improve synthetic sensors. The Spectrogram Correlation And Transformation (SCAT) receiver is an existing model of the bat auditory system that takes into account the physiology and the neural organisation of bats that emit broadband signals. In this study, the authors present a baseband receiver equivalent to the SCAT that allows an analysis of target echoes at baseband. The baseband SCAT (BSCT) is used to investigate the output of the bat-auditory model for two closely spaced scatterers and to carry out an analysis of range resolution performance and a comparison with the conventional matched filter. Results firstly show that the BSCT provides improved resolution performance. It is then demonstrated that the output of the BSCT can be obtained with an equivalent matched-filter based receiver. The results are verified with a set of laboratory experiments at radio frequencies in a high signal-to-noise ratio.

Multibeam radar (MBR) systems based on waveform diversity require a set of orthogonal waveforms in order to generate multiple channels in transmission and extract them efficiently at the receiver with digital signal processing. Linear frequency modulated (LFM) signals are extensively used in radar systems due to their pulse compression properties, Doppler tolerance, and ease of generation. Here, the authors investigate the level of isolation between MBR channels based on LFM chirps with rectangular and Gaussian amplitude envelopes. The orthogonal properties and the mathematical expressions of the isolation are derived as a function of the chirp design diversity, and specifically for diverse frequency slopes and frequency offsets. The analytical expressions are validated with a set of simulations as well as with experiments at C-band using a rotating target.

The negative effects wind farm clutter has on the performance of radar systems for Air Traffic Control and Air Surveillance is well-known in the radar research community and several mitigation techniques have been proposed to address this problem. These include bistatic and multistatic radar systems providing multiple views of the area under surveillance, and hence potential additional information that can be used to improve the receiver performance. This paper presents the analysis of a set of experimental data collected simultaneously by two radar systems, one operating at S-band and one at X-band, of echoes from an operational wind farm in the UK near Oxford. This analysis presents several parameters extracted from the time domain data and the Doppler spectra, such as Doppler centroid and bandwidth of the micro-Doppler signature as well as amplitude statistics of the time domain returns. These parameters are characterised using data recorded at monostatic and bistatic nodes, as well as at different polarisation combinations.

The algorithm developed in this paper jointly selects the optimal transmitted waveform and the control input so that a radar sensor on a moving platform with linear dynamics can reach a target by minimising a predefined cost. The cost proposed in this paper accounts for the energy of the transmitted radar signal, the energy of the platform control input and the relative position error between the platform and the target, which is a function of the waveform design and control input. Similarly to the Linear Quadratic Gaussian (LQG) control problem, we demonstrate that the optimal solution satisfies the separation principle between filtering and optimisation and, therefore, the optimum can be found analytically. The performance of the proposed solution is assessed with a set of simulations for a pulsed Doppler radar transmitting linearly frequency modulated chirps. Results show the effectiveness of the proposed approach for optimal waveform design and optimal guidance control.

This paper presents an analysis of the Doppler tolerance and isolation properties of five different sets of piecewise linear frequency modulated (PLFM) waveform triplets consisting of a combination of LFM subchirps. Different combinations of PLFM signals are used to produce waveforms with the same time-bandwidth product and optimise them with respect to isolation. The performance of the proposed waveforms are numerically investigated and a comparison between sets is presented. Results confirm that the waveforms have quasi-orthogonal properties and exhibit a degree of Doppler tolerance.

Missile seekers are becoming increasingly more capable of using Doppler Beam Sharpening (DBS) modes as part of the homing cycle, which requires new countermeasures against this mode. One type of countermeasure, is to create false targets within the seeker DBS image. This paper proposes a jamming technique to generate false targets at a precise location within a seeker DBS image, by both delaying and adding a Doppler shift to received waveforms. The effects of tracking errors on the position of the false target are analysed, both analytically and with simulations and used to assess the practical implementation of the jamming scheme. An experimental DBS system was built to test the effectiveness of the jamming scheme against a platform moving in steps and assess errors caused by incorrectly estimating the seeker trajectory.

Published in IET Radar, Sonar and Navigation. Online first 21/06/2016., The potential for using micro-Doppler signatures as a basis for distinguishing between aided and unaided gaits is considered in this study for the purpose of characterising normal elderly gait and assessment of patient recovery. In particular, five different classes of mobility are considered: normal unaided walking, walking with a limp, walking using a cane or tripod, walking with a walker, and using a wheelchair. This presents a challenging classification problem as the differences in micro-Doppler for these activities can be quite slight. Within this context, the performance of four different radar and sonar systems – a 40 kHz sonar, a 5.8 GHz wireless pulsed Doppler radar mote, a 10 GHz X-band continuous wave (CW) radar, and a 24 GHz CW radar – is evaluated using a broad range of features. Performance improvements using feature selection is addressed as well as the impact on performance of sensor placement and potential occlusion due to household objects. Results show that nearly 80% correct classification can be achieved with 10 s observations from the 24 GHz CW radar, whereas 86% performance can be achieved with 5 s observations of sonar.

Aveillant Ltd has developed a staring L-band radar that deploys a static quasi-monostatic antenna in transmission and a static digital phased array on receive capable of generating multiple simultaneous beams. Because the antenna is not rotating, the radar can stare at targets and select long dwell times with no effect on the scan rate. High Doppler resolution can be achieved and used to detect small targets, such as drones, even in heavy clutter. Despite the staring array, targets moving with a variable radial velocity generate echoes with a time-varying Doppler frequency shift that limits the integration gain achievable with standard Fourier Transform based techniques. As a result, the number of pulses can be integrated remains limited to the effective coherent processing interval with a consequent suboptimal Signal to Noise Ratio (SNR). This paper presents the results of a set of simulations aimed at studying the integration gain efficiency of a staring radar of the type of the Aveillant Holographic radar for targets moving with a constant and non-constant radial velocity. The case of a target flying horizontally with respect to the radar boresight is investigated to show that compensation techniques can be potentially employed to maximise coherence on the target and the resulting integration gain.

In this study, a feature extraction algorithm is presented which automatically generates a set of shape spectrum features based on the cadence velocity diagram of the human micro-Doppler signature. Recognition performance between humans undertaking the same activity is assessed on a set of experimental data collected with a continuous wave radar operating at X-band using a Naive Bayesian classifier and a shape-similarity-spectrum classifier. Recognition performance is analysed as a function of key parameters, such as the dwell time on the target and the size of the training set, to investigate the level of robustness of the proposed features. Results show that high level recognition performance can be achieved for both the walking and running activities.

Reliable landmine detection is still an unresolved problem. Demining operations are complex activities because of the large variety of existing landmine types, many different possible soil and terrain conditions, and environmental circumstances. Due to its ability of detecting both metallic and non-metallic objects, ground penetrating radar (GPR) is a promising method for detecting landmines that may allow faster and safer operations. As the performance of GPR is mainly governed by the target signature, the potential of discriminating target based on the presence of internal reflections could be a valuable advantage for identification and recognition process. This study demonstrates that from a set of high resolution GPR slices the internal design of the landmine can be properly imaged and characterised, confirming the applicability of the methodology and the validity of such an approach.

International audience; Automatic Target Recognition (ATR) is the task of automatically detecting and classifying targets. Recognition using Synthetic Aperture Radar (SAR) images is interesting because SAR images can be acquired at night and under any weather conditions, whereas optical sensors operating in the visible band do not have this capability. Existing SAR ATR algorithms have mostly been evaluated using the MSTAR dataset. 1 The problem with the MSTAR is that some of the proposed ATR methods have shown good classification performance even when targets were hidden, 2 suggesting the presence of a bias in the dataset. Evaluations of SAR ATR techniques are currently challenging due to the lack of publicly available data in the SAR domain. In this paper, we presenta high resolution SAR dataset consisting of images of a set of ground military target models taken at various aspect angles, The dataset can be used for a fair evaluation and comparison of SAR ATR algorithms. We applied the Inverse Synthetic Aperture Radar (ISAR) technique to echoes from targets rotating on a turntable and illuminated with a stepped frequency waveform. The targets in the database consist of four variants of two 1.7m-long models of T-64 and T-72 tanks. The gun, the turret position and the depression angle are varied to form 26 different sequences of images. The emitted signal spanned the frequency range from 13 GHz to 18 GHz to achieve a bandwidth of 5 GHz sampled with 4001 frequency points. The resolution obtained with respect to the size of the model targets is comparable to typical values obtained using SAR airborne systems. Single polarized images (Horizontal-Horizontal) are generated using the backprojection algorithm. 3 A total of 1480 images are produced using a 20 ° integration angle. The images in the dataset are organized in a suggested training and testing set to facilitate a standard evaluation of SAR ATR algorithm

A 3-D staring radar operates by using a wide beam transmitter to illuminate the entire surveillance region and generates multiple receive beams using a 2-D static array that can be digitised at element level. The sensor achieves permanent search in all directions and harnesses the spatial, temporal and spectral domains to improve detection and discrimination of low observable, highly manoeuvrable targets in congested air space against strong non-stationary clutter. While the susceptibility of traditional scanning radars to jammers has been well researched, very little work has been carried out to assess the performance of 3-D staring radars in the presence of an interference source. In this paper, the response of a staring array radar to a jammer is modelled. Results are presented showing that by exploiting the persistent dwell time of the staring array, it is possible to achieve effective jammer suppression using null steering or similar techniques.

Ground Penetrating Radar (GPR) is widely recognised as an operationally useful sensor for mine detection as it can offer better detection performance than the ubiquitous metal detector in the presence of low-metal content mines. However, GPR has to overcome many potential sources of false alarm due to clutter and battlefield debris, which lower the efficiency of the sensor. This paper analyses a set of experimental data collected in a recent multi-offset GPR measurement campaign with inert landmines composed of different assemblies buried in sandy soil. The aim of the work is to evaluate the key differences observed by a radar system when the transmitter and the receiver are moved apart, as a function of their distance and hence when the illuminated section of the target is diversified. The results of the comparison between the collected multi-offset profiles show that using a bistatic geometry could represent a strategy to reconstruct composite objects with finer and better details.

Echolocating bats show a unique ability to detect, resolve and discriminate targets. The Spectrogram Correlation and Transformation (SCAT) receiver is a model of the Eptesicus fuscus auditory system that presents key signal processing differences compared to radar which may offer useful lessons for improvement. A baseband version of the SCAT is used to investigate advantages and disadvantages of bat-like signal processing against the task of target resolution. The baseband receiver is applied to RF experimental data and results show higher range resolution than the reciprocal of the transmitted bandwidth can be achieved for two closely spaced scatterers.

We present an algorithm that allows an interceptor aircraft equipped with an airborne radar to meet another air target (the intercepted) by developing a guidance law and automatically adapting and optimising the transmitted waveform on a pulse to pulse basis. The algorithm uses a Kalman filter to predict the relative position and speed of the interceptor with respect to the target. The transmitted waveform is automatically selected based on its ambiguity function and accuracy properties along the approaching path. For each pulse, the interceptor predicts its position and velocity with respect to the target, takes a measurement of range and radial velocity and, with the Kalman filter, refines the relative range and range rate estimates. These are fed into a Linear Quadratic Gaussian (LQG) controller that ensures the interceptor reaches the target automatically and successfully with minimum error and with the minimum guidance energy consumption.

This Letter presents preliminary results of the analysis of amplitude statistics of wind turbine clutter as extracted from multistatic radar data. It is shown that the T-location-scale distribution provides good fitting of the experimental data, and that there are combinations of bistatic angle and polarisations where the bistatic clutter has more favourable statistics for target detection than the simultaneous monostatic clutter.

The authors present an algorithm that allows an interceptor aircraft equipped with an airborne radar to meet another air target (the intercepted) by developing a guidance law and automatically adapting and optimising the transmitted waveform on a pulse-to-pulse basis. The algorithm uses a Kalman filter to predict the relative position and speed of the interceptor with respect to the target. The transmitted waveform is automatically selected based on its ambiguity function and accuracy properties along the approaching path. For each pulse, the interceptor predicts its position and velocity with respect to the target, takes a measurement of range and radial velocity and, with the Kalman filter, refines the relative range and range rate estimates. These are fed into a linear quadratic Gaussian controller that ensures the interceptor reaches the target automatically and successfully with minimum error and with the minimum guidance energy consumption.

Multiple-Beam Radar Systems (MBRS) based on waveform diversity require a set of orthogonal waveforms in order to generate multiple channels in transmission and extract them efficiently at the receiver using digital signal processing. Chirp signals are extensively used in radar systems due to their pulse compression properties, Doppler tolerance and ease of generation. In this paper, we investigate the level of isolation between two linear frequency modulated (LFM) chirps as a function of the frequency slope and of the chirp starting frequency. Results are derived analytically and verified with a set of measurements at S-band.

With the proliferation of low-intensity conflict, landmines have proven to be one of the weapons of choice for both government and guerrilla forces around the world. Recent improvements to mine technology pose increasingly significant problems for demining operations, requiring the constant upgrading of countermine technologies. Ground Penetrating Radar (GPR) is one of the most exhaustively researched topics in the detection of buried mines as it can be used to detect non-metallic and plastic mines. However, identification and recognition are still unsolved problems, due to the scattering similarity between mines and clutter objects. This study provides an experimental evaluation of the improvements that a bistatic approach could yield and what can be gained from investigating the angular dependencies of the landmine radar signature.

The authors study the radar signature of a new type of wind turbine, named the Wind Lens. This design includes a flanged shroud around the turbine which concentrates the wind flow past the turbine blades and hence improves the efficiency. The design also offers improved safety and reduces acoustic noise. Furthermore, it may offer a significantly lower radar signature, which may make the design much more attractive for use in situations where conventional wind turbine designs may disturb the operation of radars. The authors present the results of an experimental trial, carried out in the UK, to measure the radar cross section (RCS) of a 5 kW Wind Lens turbine prototype and provide a reference database that can be used for comparing the Wind Lens RCS with that of conventional turbines. The authors also investigate the methods to further reduce the Wind Lens RCS and present the results of a time-varying Doppler analysis. The results show that the addition of a metallic mesh around the shroud obscures the rotating blades, and hence mitigates the RCS by 15 dB, at angles where the radar interference is highest.

In this paper, we derive the Ambiguity Function (AF) of a narrowband and a wideband hyperbolic chirp. We calculate the second derivatives of the squared amplitude of the narrowband Complex Ambiguity Function (CAF) and use them to calculate the Fisher Information Matrix (FIM) of the estimators of the target range and velocity. The FIM is then used to calculate the Cramer-Rao Lower Bounds (CRLB) of the variance of the estimators and to ´ carry out an analysis of estimation performance and a comparison with the case of a liner chirp with a rectangular and a Gaussian amplitude modulation. The analysis and the calculations of the CRLB are also extended to a train of hyperbolic chirps. Results corroborate that at narrowband the hyperbolic chirp is less Doppler tolerant than the linear chirp and show that the hyperbolic chirp provides a comparable measurement accuracy to the linear chirp. Results at wideband corroborate the superior Doppler tolerance of the hyperbolic chirp with respect to that of the linear chirp.

Echolocating bats have evolved an excellent ability to detect and discriminate targets in highly challenging environments. They have had more than 50 million years of evolution to optimise their echolocation system with respect to their surrounding environment. Behavioural experiments have shown their exceptional ability to detect and classify targets even in highly cluttered surroundings. The way bats process signals is not exactly the same as in radar and hence it can be useful to investigate the differences. The Spectrogram Correlation And Transformation receiver (SCAT) is an existing model of the bat auditory system that takes into account the physiology and underlying neural organisation in bats which emit chirped signals. In this paper, we propose a baseband receiver equivalent to the SCAT. This will allow biologically inspired signal processing to be applied to radar baseband signals. It will also enable further theoretical analysis of the key concepts, advantages and limitations of the "bat signal processing" for the purpose of target detection, localisation and resolution. The equivalence is demonstrated by comparing the output of the original SCAT to that of our proposed baseband version using both simulated and experimental target echoes. Results show that the baseband receiver provides compatible frequency interference pattern for two closely located scatterers.

Automatic target classification under all conditions is a key challenge for modern radar and sonar systems. Echolocating nectar feeding bats are able to detect and select flowers of bat-pollinated plants even in highly cluttered environments. It is thought that these flowers have evolved to ease classification by bats, and that their echo-acoustic signatures contain critical information that aids the bat in choosing the most suitable flowers. In investigating the features of these flowers that aid the bats search for nectar, the strategy underpinning the task of classification of static targets by bats may be understood and this may additionally offer lessons for radar and sonar systems. Here, we analyse a real set of data containing high range resolution profiles of unpollinated corollas of Cobaea scandens, which is a flower of the type that is pollinated by bats. These were collected by transmitting a synthetic wideband linear chirp with an acoustic radar capable of very high range resolution. Classification performance of a k-NN classifier and a Naive Bayesian classifier is assessed using information available in both the time and frequency domains. This facilitates quantification of the differences in these echoes because of the flower wilting process and lack of physical parts.

Wind farm clutter can negatively affect Air Traffic Control and air defence radar systems by obscuring true targets and by generating non-stationary clutter which increases the probability of false alarm. Bistatic and multistatic radar may mitigate these effects thanks to reduced clutter radar cross section and Doppler spread with respect to conventional monostatic systems. This paper presents the results of recent measurements taken with two radar systems to measure the simultaneous monostatic and bistatic signature of wind turbines, at S-band and X-band. This initial analysis shows the bistatic Doppler signature of wind turbines and investigates the main differences seen at modest bistatic angles. Polarimetric variations are also analysed using co-polarised VV and HH and cross-polarised VH data.

The results of recent measurements taken with two radar systems to measure the simultaneous monostatic and bistatic signature of wind turbines, at S-band and X-band are presented. Coherent monostatic and bistatic data was collected with the University College London (UCL) NetRAD 2.4 GHz radar, and the Cranfield University CW radar operating at X-band. Initial analysis shows the bistatic Doppler signature of wind turbines and informs on the key differences seen at modest bistatic angles. Polarimetric variations are also analysed via data gathered from using co-polarised VV and HH and cross-polarised VH components.

A set of experimental trials was conducted with a 10 GHz continuous wave radar to collect micro-Doppler signatures of a large single, double and triple bladed rotating fin and a sized miniature helicopter. We analysed the target micro-Doppler signatures and decomposed them using the Empirical Mode Decomposition (EMD) method in order to extract a series of Intrinsic Mode Functions (IMFs) which admit only an instantaneous frequency. The aim of this paper is to investigate what information is available in the target IMFs to help identify key features that can be used for improving target classification and identification. The experimental testing was complimented with a set of simulations to assist in the understanding of the results.

In the last century both radar and sonar active technology developed from inception to the point where high resolution images can be obtained from long ranges. The available technology can exploit Doppler effects, structural resonances, nonlinear scattering, synthetic aperture platforms, and sediment-penetrating modalities. Active sonar and radar share many common approaches, in part because of the similarities of the problems they address, both in the military and commercial research areas. Moreover, in the last two decades, research into both radar and sonar has explored biomimetic and bioinspired solutions [1-5], in recognition of the fact that whilst man-made systems have access to power and bandwidth far beyond that available to any living organism [6], some biological solutions have benefitted from millions of years of natural optimisation to evolve sensing capabilities and strategies and meet the challenges of survival (finding food and mates, avoiding predators, sensing and navigating to and within appropriate habitats, etc.) [7]. Problem solving for survival goes beyond the particular radiation used in sensing, covering also signal processing, detection and classification of targets, use of platforms, and strategies for deploying sensors and interpreting data [8-10]. Bio-inspired approaches follow logically when the problems facing manufactured technology resemble those addressed in nature. For example, in the last 15 years the arena for sonar challenge has changed from the passive detection of large quiet nuclear submarines in the deep, relatively quiet and uncluttered waters, to minehunting by active sonar in shallow coastal waters [11], a problem far closer to that faced by dolphins and bats in their natural environments [12,13].

Landmine clearance is a severe and unresolved humanitarian issue. The development of low-cost, smaller, faster and lighter Ground Penetrating Radars (GPR), which can be mounted on unmanned platforms, will allow faster and safer 24/7 operations. This technology will make it possible to survey affected areas with more flexible trajectories and these will provide measurements of landmine signatures from many different aspect angles. As a result, multi-perspective information over wide angular windows and the behaviour of the signature as a function of the angle of illumination can be exploited. Landmine signatures are expected to present features that are less sensitive to the angle of illumination with respect to those of common cluttered objects, and this can lead to an improvement in detection and discrimination performance. In this paper, we present the results of an experimental trial carried out to collect the High Range Resolution Profiles (HRRPs) of two landmines, the SB-33 and the VS-50, off the ground. An analysis of the auto-correlation function of each range bin as a function of the aspect angle is presented together with that of the cross-correlation between profiles collected from different aspect angles.

The purpose of this paper is to present an experimental trial carried out at the Defence Academy of the United Kingdom to measure simultaneous multistatic and multimodal micro-Doppler signatures of various targets, including humans and flying UAVs. ewline Signatures were gathered using a network of sensors consisting of a CW monostatic radar operating at 10 GHz (X-band) and an ultrasound radar with a monostatic and a bistatic channel operating at 45 kHz and 35 kHz, respectively. A preliminary analysis of automatic target classification performance and a comparison with the radar monostatic case is also presented.