Search

α-Amylase is a starch-hydrolyzing enzyme (EC 3.2.1.1) indispensable for germination of cereal seeds, but it is also expressed during the ripening stage. Previous studies demonstrated that the enzyme is activated in developing rice seeds under extremely hot weather and triggers a loss of grain quality by hindering the accumulation of storage starch in the endosperm. Since inactive or, preferably, heat-labile α-amylases are preferable for breeding premium rice, we developed a method for rapid screening of inactive and temperature-sensitive mutants of the enzyme by combining the random mutagenesis by error-prone PCR and an on-filter activity test of the recombinant enzyme expressed by Escherichia coli. This technique was applied to a major α-amylase in the developing seed, Amy3D, and the activity of the isolated mutant enzymes was verified with both the bacteria-expressed recombinant proteins and the extract from the endosperm overexpressing each of them. Then, we identified several substitutions leading to loss of the activity of amino acid residues (Leu28, Asp112, Cys149, Trp201, Asp204, Gly295, Leu300 and Cys342), as well as a variety of heat-sensitive substitutions of Asp83, Asp187 and Glu252. Furthermore, variations of the heat-labile enzymes were created by combining these heat-sensitive mutations. The effects of the respective mutations and their relationship to the structure of the enzyme molecule are discussed.

Animal derived milk which is an important part of human diet due to its high nutritional value not only supports humans but also presents a growth environment for pathogenic bacteria. Milk may become contaminated with bacteria through udder infections or through contact within the dairy farm environment. Infections are treated with antibiotics, with β-lactams most commonly used in veterinary medicine. However, their frequent use leads to the emergence of β-lactam resistant bacterial strains, which causes difficulties in the treatment of infections in both humans and animals. Detection of pathogens as well as their antibiotic sensitivity is a pre-requisite for successful treatment and this is generally achieved with laboratory-based techniques such as growth inhibition assays, enzyme-linked immunosorbent assays (ELISA) or polymerase chain reactions (PCRs), which are unavailable in resource-limited settings. Here, we investigated paper-based analytical devices (μPADs) for the presumptive detection of Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli) and their antibiotic resistant bacterial strains in milk samples. The μPADs were fabricated on filter paper using wax printing, and then impregnated with chromogenic substrates, which reacted with bacterial enzymes to form coloured products. Limits of detection of S. aureus and E. coli and their antibiotic resistant strains in milk samples were found to be 106 cfu mL-1. Enrichment of milk samples in a selective medium for 12 h enabled detection as low as 10 cfu mL-1. The paper devices tested on a set of 640 milk samples collected from dairy animals in Pakistan demonstrated more than 90% sensitivity and 100% selectivity compared to PCR, showing promise to provide inexpensive and portable diagnostic solutions for the detection of pathogenic bacteria in resource-limited settings.

Developing sensors for food safety, soil analysis, water quality monitoring and healthcare often requires distinguishing between different species of bacteria. The most rapid, sensitive and specific method to identify bacteria is to analyse their DNA sequence, which comprises of disinfection and lysis of bacterial cells, amplification of the isolated DNA and detection of the amplified sequence. Seamless integration of these steps on a paper substrate is a big challenge. This problem is even more complex for mycobacteria as its thick cell wall structure impedes lysis and the high GC-content of the genome requires careful optimization of enzymatic denaturation. Here we successfully combine thermal lysis and loop-mediated isothermal amplification (LAMP) into a single reaction step on paper. We demonstrate our integrated assay by amplifying DNA from 100 CFU/mL of Escherichia coli (MG1655) and Mycobacterium smegmatis (mc2155) cells in 30 min on a paper substrate. We also confirm that E. coli and M. smegmatis can be completely disinfected on paper by heating at 60 °C for 5 min and 15 min respectively, making this assay safe and suitable for incorporation into diverse paperfluidic sensors for field use.

Coating of antibacterial layer on the surface of cellulosic paper has numerous potential applications. In the present work, sodium alginate (SA) served as a binder to disperse Zn 2+ and the prepared zinc oxide (ZnO) particles were used as antibacterial agents. The rheology test revealed that there were cross-linking between Zn 2+ and SA molecular chains in the aqueous solution, resulting in the viscosity of ZnO/SA composite coating increased in the low shear rate region and decreased in the high shear rate region as compared with pure SA. SEM and EDS mapping images showed that the ZnO particles were prepared successfully at 120 °C and dispersed homogeneously on the surface of cellulose fibers and the pores of cellulosic papers. The thermal stabilities of the coated papers decreased as compared to the original blank cellulosic paper, which was ascribed to the low thermal stability of SA and the catalytic effect of ZnO on SA. The tensile stress and Young’s modulus of ZnO/SA composite coated paper increased up 39.5% and 30.7%, respectively, as compared with those of blank cellulosic paper. The antibacterial activity tests indicated that the ZnO/SA composite coating endowed the cellulosic paper with effectively growth inhibition of both Gram-negative bacteria E. coli and Gram-positive bacteria S. aureu .

Selective modulation of retinaldehyde dehydrogenases (RALDHs)-the main aldehyde dehydrogenase (ALDH) enzymes converting retinal into retinoic acid (RA), is very important not only in the RA signaling pathway but also for the potential regulatory effects on RALDH isozyme-specific processes and RALDH-related cancers. However, very few selective modulators for RALDHs have been identified, partly due to variable overexpression protocols of RALDHs and insensitive activity assay that needs to be addressed. In the present study, deletion of the N-terminal disordered regions is found to enable simple preparation of all RALDHs and their closest paralog ALDH2 using a single protocol. Fluorescence-based activity assay was employed for enzymatic activity investigation and screening for RALDH-specific modulators from extracts of various spices and herbs that are well-known for containing many phyto-derived anti-cancer constituents. Under the established conditions, spice and herb extracts exhibited differential regulatory effects on RALDHs/ALDH2 with several extracts showing potential selective inhibition of the activity of RALDHs. In addition, the presence of magnesium ions was shown to significantly increase the activity for the natural substrate retinal of RALDH3 but not the others, while His-tag cleavage considerably increased the activity of ALDH2 for the non-specific substrate retinal. Altogether we propose a readily reproducible workflow to find selective modulators for RALDHs and suggest potential sources of selective modulators from spices and herbs.

Bacteriophages find applications in agriculture, medicine, and food safety. Many of these applications can expose bacteriophages to stresses that inactivate them including acidic and basic pH. Bacteriophages can be stabilized against these stresses by materials including paper, a common material in packaging and consumer products. Combining paper and bacteriophages creates antibacterial materials, which can reduce the use of antibiotics. Here we show that adsorption on paper protects T4, T5, and T7 bacteriophage from acidic and basic pH. We added bacteriophages to filter paper functionalized with carboxylic acid (carboxyl methyl cellulose) or amine (chitosan) groups, and exposed them to pH from 5.6 to 14. We determined the number of infective bacteriophages after exposure directly on the paper. All papers extended the lifetime of infective bacteriophage by at least a factor of four with some papers stabilizing bacteriophages for up to one week. The degree of stabilization depended on five main factors (i) the family of the bacteriophage, (ii) the charge of the paper and bacteriophages, (iii) the location of the bacteriophages within the paper, (iv) the ability of the paper to prevent bacteriophage-bacteriophage aggregation, and (v) the sensitivity of the bacteriophage proteins to the tested pH. Even when adsorbed on paper the bacteriophages were able to remove E. coli in milk. Choosing the right paper modification or material will protect bacteriophages adsorbed on that material against detrimental pH and other environmental challenges increasing the range of applications of bacteriophages on materials.

In this experimental study, we developed lateral flow immunoassay strips for the detection of Escherichia coli. For labelling, gold nanoparticles were prepared and modified with a Raman label. As a result of this, not only colorimetric responses but also Raman responses were obtained from the same strips. The color and Raman intensities were employed for the quantitative determination of Escherichia coli. The employment of two different detection methods strengthens the quantitative determination of Escherichia coli by lateral flow immunoassay, which is mostly used for qualitative detection or sometimes the semi-quantitative determination of samples. After careful optimization and validation steps, the developed strips allowed the highly sensitive determination of Escherichia coli in water and urine samples.

The capacity of Ag nanoparticles to destroy various micro-organisms makes it one of the most powerful antimicrobial agents, an attractive feature against antibiotic resistant bacteria. Here, a simple method to develop coating of colloidal silver on paper using a biological method is presented. The coated paper was studied by scanning electron microscopy, X-ray diffraction technique and atomic absorption spectroscopy. The antibacterial activity of the coated paper against Escherichia coli and Staphylococcus aureus was measured by agar diffusion method. This study shows the potential use of the coated paper as a food antimicrobial packing material for longer shelf life.

As a cost-effective alternative to silver nanoparticles, we have investigated the use of copper nanoparticles in paper filters for point-of-use water purification. This work reports an environmentally benign method for the direct in situ preparation of copper nanoparticles (CuNPs) in paper by reducing sorbed copper ions with ascorbic acid. Copper nanoparticles were quickly formed in less than 10 minutes and were well distributed on the paper fiber surfaces. Paper sheets were characterized by x-ray diffraction, scanning electron microscopy, energy dispersive x-ray spectroscopy, and atomic absorption spectroscopy. Antibacterial activity of the CuNP sheets was assessed for by passing Escherichia coli bacteria suspensions through the papers. The effluent was analyzed for viable bacteria and copper release. The CuNP papers with higher copper content showed a high bacteria reduction of log 8.8 for E. coli. The paper sheets containing copper nanoparticles were effective in inactivating the test bacteria as they passed through the paper. The copper levels released in the effluent water were below the recommended limit for copper in drinking water (1 ppm).

Water quality assessment requires a continuous and strict analysis of samples to guarantee compliance with established standards. Nowadays, the increasing number of pollutants and their synergistic effects lead to the development general toxicity bioassays capable to analyse water pollution as a whole. Current general toxicity methods, e.g. Microtox(®), rely on long operation protocols, the use of complex and expensive instrumentation and sample pre-treatment, which should be transported to the laboratory for analysis. These requirements delay sample analysis and hence, the response to avoid an environmental catastrophe. In an attempt to solve it, a fast (15 min) and low-cost toxicity bioassay based on the chromatic changes associated to bacterial ferricyanide reduction is here presented. E. coli cells (used as model bacteria) were stably trapped on low-cost paper matrices (cellulose-based paper discs, PDs) and remained viable for long times (1 month at -20 °C). Apart from bacterial carrier, paper matrices also acted as a fluidic element, allowing fluid management without the need of external pumps. Bioassay evaluation was performed using copper as model toxic agent. Chromatic changes associated to bacterial ferricyanide reduction were determined by three different transduction methods, i.e. (i) optical reflectometry (as reference method), (ii) image analysis and (iii) visual inspection. In all cases, bioassay results (in terms of half maximal effective concentrations, EC50) were in agreement with already reported data, confirming the good performance of the bioassay. The validation of the bioassay was performed by analysis of real samples from natural sources, which were analysed and compared with a reference method (i.e. Microtox). Obtained results showed agreement for about 70% of toxic samples and 80% of non-toxic samples, which may validate the use of this simple and quick protocol in the determination of general toxicity. The minimum instrumentation requirements and the simplicity of the bioassay open the possibility of in-situ water toxicity assessment with a fast and low-cost protocol.

Paper with antimicrobial properties was developed through in situ growth of ZnO nanorods. The targeted application for this type of paper is in health centers as wallpaper, writing paper, facemasks, tissue paper, etc. The paper was tested on three model microbes, Gram-positive bacteria Staphylococcus aureus, Gram-negative bacteria Escherichia coli and common airborne fungus Aspergillus niger. No viable bacterial colonies or fungal spores could be detected in the areas surrounding test samples of the antimicrobial paper. Gram-negative bacteria Escherichia coli were found to be inhibited in an area that is 239% and 163% the area of the paper sample under different room lighting conditions, i.e., halogen and fluorescent lamp illumination, respectively. For Gram-positive bacteria Staphylococcus aureus the zones of inhibition surrounding the paper samples are 102% and 70%, and for Aspergillus niger, 224% and 183% of the sample area, under similar lighting conditions.

The present work describes ceric ammonium nitrate (CAN) initiated graft copolymerization of acrylamide onto cellulose-based filter paper followed by entrapment of silver nanoparticles. The copolymerization was carried out in aqueous solution, containing 2M acrylamide monomer and 16mM N,N'-methylene bisacrylamide (MB) crosslinker. The optimum initiation time and grafting reaction temperature were found to be 15min and 30 degrees C, respectively. The silver nanoparticles were loaded into grafted filter paper by equilibration in silver nitrate solution followed by citrate reduction. The formation of silver nanoparticles has been confirmed by TEM and SAED analysis. The novel nano silver loaded filter paper has been investigated for its antimicrobial properties against E.coli. This newly developed material shows strong antibacterial property and thus offers its candidature for possible use as antibacterial food-packaging material.

Qi Wang,1 Philip Larese-Casanova,2 Thomas J Webster3,41Department of Bioengineering, College of Engineering, Northeastern University, Boston, MA, USA; 2Department of Civil and Environmental Engineering, College of Engineering, Northeastern University, Boston, MA, USA; 3Department of Chemical Engineering, College of Engineering, Northeastern University, Boston, MA, USA; 4Center of Excellence for Advanced Materials Research, King Abdulaziz University, Jeddah, Saudi ArabiaAbstract: There are wide spread bacterial contamination issues on various paper products, such as paper towels hanging in sink splash zones or those used to clean surfaces, filter papers used in water and air purifying systems, and wrappings used in the food industry; such contamination may lead to the potential spread of bacteria and consequent severe health concerns. In this study, selenium nanoparticles were coated on normal paper towel surfaces through a quick precipitation method, introducing antibacterial properties to the paper towels in a healthy way. Their effectiveness at preventing biofilm formation was tested in bacterial assays involving Staphylococcus aureus, Pseudomonas aeruginosa, Escherichia coli, and Staphylococcus epidermidis. The results showed significant and continuous bacteria inhibition with about a 90% reduction from 24 to 72 hours for gram-positive bacteria including S. aureus and S. epidermidis. The selenium coated paper towels also showed significant inhibition of gram-negative bacteria like P. aeruginosa and E. coli growth at about 57% and 84%, respectively, after 72 hours of treatment. Therefore, this study established a promising selenium-based antibacterial strategy to prevent bacterial growth on paper products, which may lead to the avoidance of bacteria spreading and consequent severe health concerns.Keywords: selenium nanoparticles, paper towels, antibacterial

Bacteria identification has predominantly been conducted using specific bioreceptors such as antibodies or nucleic acid sequences. This approach may be inappropriate for environmental monitoring when the user does not know the target bacterial species and for screening complex water samples with many unknown bacterial species. In this work, we investigate the supervised machine learning of the bacteria-particle aggregation pattern induced by the peptide sets identified from the biofilm-bacteria interface. Each peptide is covalently conjugated to polystyrene particles and loaded together with bacterial suspensions onto paper microfluidic chips. Each peptide interacts with bacterial species to a different extent, leading to varying sizes of particle aggregation. This aggregation changes the surface tension and viscosity of the liquid flowing through the paper pores, altering the flow velocity at different extents. A smartphone camera captures this flow velocity without being affected by ambient and environmental conditions, towards a low-cost, rapid, and field-ready assay. A collection of such flow velocity data generates a unique fingerprinting profile for each bacterial species. Support vector machine is utilized to classify the species. At optimized conditions, the training model can predict the species at 93.3% accuracy out of five bacteria: Escherichia coli, Staphylococcus aureus, Salmonella Typhimurium, Enterococcus faecium, and Pseudomonas aeruginosa. Flow rates are monitored for less than 6 s and the sample-to-answer assay time is less than 10 min. The demonstrated method can open a new way of analyzing complex biological and environmental samples in a biomimetic manner with machine learning classification.

Waste paper as a new kind of biomass resource was selected as the research object to ferment and produce D-lactic acid in this paper. The components of raw materials were compared between waste office paper and waste newspaper, which were pretreated by shredding, 3% H2SO4 and enzymatic hydrolysis. The hydrolysate could be used as single carbon source for lipid fermentation by Escherichia coli JH13. Shake-flask fermentation was carried out to produce D-lactic acid by Escherichia coli JH13 using the hydrolysate of waste office paper and waste newspaper as carbon source. Fermentation with waste office paper and waste newspaper hydrolysate as carbon source achieved a D-lactic acid production of 35.86 ± 0.62 g/L, which was 39.8% higher than the D-lactic acid production (25.64 ± 0.48 g/L) with waste newspaper hydrolysate as carbon source.

Developing sensors in the domains of food safety, soil analysis, water quality monitoring and healthcare often requires distinguishing between different species of bacteria. The most rapid, sensitive and specific method to identify bacteria is by analysing their DNA sequence, which comprises of disinfection and lysis of bacterial cells, amplification of the isolated DNA and detection of the amplified sequence. Seamless integration of these assays on a paper substrate remains a big challenge in paperfluidic nucleic acid analyis. Combining lysis and isothermal amplification in a single reaction step is difficult because the porosity of paper and the presence of cell debris following lysis reduces the efficiency of DNA amplification. On the other hand, extracting and purifying the DNA after lysis to improve the amplification efficiency involves addition of chemical reagents, one or more wash steps and manual intervention. This problem is even more complex for mycobacteria as its thick cell wall structure impedes lysis and the high GC-content of the genome requires careful optimization of enzymatic denaturation during isothermal amplification. Here we successfully combine thermal lysis and loop-mediated isothermal amplification (LAMP) into a single reaction step on paper without the need for any intermediate intervention. We demonstrate our integrated assay by amplifying DNA from 100 CFU/mL ofEscherichia coli(MG1655) andMycobacterium smegmatis(mc2155) cells in 30 min on a paper substrate. We also confirm thatE. coliandM. smegmatiscan be completely disinfected on paper by heating at 60 °C for 5 min and 15 min respectively, making this assay safe and suitable for incorporation into diverse paperfluidic sensors for field use.Electronic Supplementary Information (ESI) is available.

The plate-like graphene shells (GS) produced by an original methane pyrolysis method and their derivatives graphene oxide (GO) and graphene oxide paper (GO-P) were evaluated with luminescent Escherichia coli biotests and additional bacterial-based assays which together revealed the graphene-family nanomaterials' toxicity and bioactivity mechanisms. Bioluminescence inhibition assay, fluorescent two-component staining to evaluate cell membrane permeability, and atomic force microscopy data showed GO expressed bioactivity in aqueous suspension, whereas GS suspensions and the GO-P surface were assessed as nontoxic materials. The mechanism of toxicity of GO was shown not to be associated with oxidative stress in the targeted soxS::lux and katG::lux reporter cells; also, GO did not lead to significant mechanical disruption of treated bacteria with the release of intracellular DNA contents into the environment. The well-coordinated time- and dose-dependent surface charge neutralization and transport and energetic disorders in the Escherichia coli cells suggest direct membrane interaction, internalization, and perturbation (i.e., "membrane stress") as a clue to graphene oxide's mechanism of toxicity.

Traditionary multiplex asymmetric polymerase chain reaction (PCR) can be applied to detect multiplex target organisms simultaneously, but complex optimizations of primer concentrations and staggered additions of primers are required to achieve equal amplification of multiplex genes. To overcome this shortcoming, we propose a novel method based on multiplex asymmetric PCR and paper-based nucleic acid diagnostics (PBNAD). In the asymmetric PCR, a universal primer was introduced to break the bottlenecks of low sensitivity and self-inhibition among different sets of primers. Amplification using the novel multiplex asymmetric PCR boosted the quantity of single-stranded amplicons, and the amplified products contained the same sequence at the 5' end. Therefore, only one gold nanoparticle-based signal probe was needed for the simultaneous detection of three genes using the PBNAD platform, and the detection signals could be observed with the naked eye. With this highly efficient, novel multiplex asymmetric PCR, as little as 1 pg/μL genomic DNA can be detected. This method can also be applied to genotyping for reliable epidemiological investigations. This proof-of-concept study highlights the potential of the PBNAD platform for cost- and labor-effective applications in the detection of pathogenic bacteria.