Search

Living vegetation volume (LVV), one of the most difficult tree parameters to calculate, is among the most important factors that indicates the biological characteristics and ecological functions of the crown. Obtaining precise LVV estimates is, however, challenging task because the irregularities of many crown shapes are difficult to capture using standard forestry field equipment. Terrestrial light detection and ranging (T-LiDAR) can be used to record the three-dimensional structures of trees. The primary branches of Larix olgensis and Quercus mongolica in the Qingyuan Experimental Station of Forest Ecology at the Chinese Academy of Sciences (CAS) were taken as the research objects. A new rapid LVV estimation method called the filling method was proposed in this paper based on a T-LiDAR point cloud. In the proposed method, the branch point clouds are divided into leaf points and wood points. We used RiSCAN PRO 1.64 to manually separate the leaf points and wood points under careful visual inspection, and calculated that leaf points and wood points accounted for 91% and 9% of the number of the point clouds of branches. Then, the equation LVV = V1N (where N is the number of leaf points, and V1 is cube size) is used to calculate LVV. When the laser transmission frequency is 300,000 points/second and the point cloud is diluted to 30% using the octree method, the point cloud can be replaced by a cube (V1) of 6.11 cm3 to fill the branch space. The results showed that good performance for this approach, the measuring accuracy for L. olgensis and Q. mongolica at the levels of α = 0.05 and α = 0.01, respectively (94.35%, 90.01% and 91.99%, 85.63%, respectively). The results suggest that the proposed method can be conveniently used to calculate the LVV of coniferous and broad-leaf species under specific scanning settings. This work is explorative because hypotheses or a theoretical framework have not been previously defined. Rather, we would like to contribute to the formation of hypotheses as a background for further studies. [ABSTRACT FROM AUTHOR]

A thorough understanding of the heritability, genetic correlations and additive and non-additive variance components of tree growth and wood properties is a requisite for effective tree breeding. This knowledge is essential to maximize genetic gain, that is, the amount of increase in trait performance achieved annually through directional selection. Understanding the genetic attributes of traits targeted by breeding is also important to sustain decade-long genetic progress, that is, the progress made by increasing the average genetic value of the offspring as compared to that of the parental generation. In this study, we report quantitative genetic parameters for fifteen growth, wood chemical and physical traits for the world-famous Eucalyptus urograndis hybrid (E. grandis × E. urophylla). These traits directly impact the optimal use of wood for cellulose pulp, paper, and energy production. A population of 1,000 trees sampled in a progeny trial was phenotyped directly or following the development and use of near-infrared spectroscopy calibration models. Trees were genotyped with 33,398 SNPs and 24,001 DArT-seq genome-wide markers and genomic realized relationship matrices (GRM) were used for parameter estimation with an individual-tree additive-dominant mixed model. Wood chemical properties and wood density showed stronger genetic control than growth, cellulose and fiber traits. Additive effects are the main drivers of genetic variation for all traits, but dominance plays an equally or more important role for growth, singularly in this hybrid. GRM´s with >10,000 markers provided stable relationships estimates and more accurate parameters than pedigrees by capturing the full genetic relationships among individuals and disentangling the non-additive from the additive genetic component. Low correlations between growth and wood properties indicate that simultaneous selection for wood traits can be applied with minor effects on genetic gain for growth. Conversely, moderate to strong correlations between wood density and chemical traits exist, likely due to their interdependency on cell wall structure such that responses to selection will be connected for these traits. Our results illustrate the advantage of using genome-wide marker data to inform tree breeding in general and have important consequences for operational breeding of eucalypt urograndis hybrids. [ABSTRACT FROM AUTHOR]

A reasonable micro-pits texture has been initially proved that it can improve friction characteristics between wood and cemented carbide surface and reduce surface friction coefficient. In order to study the cutting performance of the micro-texture when it is applied to the cutting tool for cutting wood more effectively, this paper selected micro-pit texture for studying influence of surface micro-texture cutting tool on wood cutting performance and cutting temperature, finding that when micro-pit cemented carbide cutting tool is adopted for turning the northeast China ash (Fraxinus spp.), it can reduce cutting force of turning and surface friction coefficient between rake face and cuttings. Moreover, for type A and type B cutting tools, when the texture parameters are that the diameter of the micro-pit is 80μm, the depth of the micro pit is: 10μm, area occupancy is 20% and the diameter of the micro-pit is 120μm, the depth of the micro-pit is 10μm and the area occupancy is 20%, the effect generated is the best. When a texture cutting tool is used for cutting, the decrease of the highest temperature in the cutting area is not very great, but the average temperature in the cutting area changes a lot, which is mainly caused by that micro-texture is processed at a position of the rake face close to the main cutting edge and that the highest temperature of cutting is mainly generated on the contact point between tool tip and wood. A reasonable micro-texture parameter can form a layer of liquid lubricating film on the up and down contact surfaces such that the direct contact between cemented carbide and northeast China ash is changed into indirect contact between lubricating films formed by the liquid so as to reduce the surface friction coefficient. [ABSTRACT FROM AUTHOR]

Abydos is a large, complex archaeological site located approximately 500 km south of Cairo in Upper Egypt. The site has served as a cemetery for thousands of years and is where most of the Early Dynastic royal tombs are located. North Abydos includes the Middle Cemetery and the North Cemetery, which are separated from each other by a wadi. The Middle Cemetery was the burial ground for important Sixth Dynasty (2407–2260 BC) officials and over time for thousands of elite and non-elite individuals as well. Excavations at the core area of the Old Kingdom mortuary landscape have revealed many culturally important wooden objects but these are often found with extensive deterioration that can compromise their preservation. The objectives of this study were to characterize the biodegradation that has taken place in excavated wooden objects, elucidate the type of wood degradation present, obtain information on soil properties at the site and identify fungi currently associated with the wood and soils. Light and scanning electron microscopy studies were used to observe the micromorphological characteristics of the wood, and culturing on different media was done to isolate fungi. Identification of the fungi was done by examining morphological characteristics and extracting rDNA from pure cultures and sequencing the ITS region. Wooden objects, made from Cedrus, Juniperus and Acacia as well as several unidentified hardwoods, were found with extensive degradation and were exceedingly fragile. Termite damage was evident and frass from the subterranean termites along with sand particles were present in most woods. Evidence of soft rot attack was found in sections of wood that remained. Fungi isolated from wood and soils were identified as species of Aspergillus, Chaetomium, Cladosporium, Fusarium, Penicillium, Stemphylium Talaromyces and Trichoderma. Results provide important information on the current condition of the wood and gives insights to the identity of the fungi in wood and soils at the site. These results provide needed information to help develop conservation plans to preserve these degraded and fragile wooden objects. [ABSTRACT FROM AUTHOR]

The basidiomycete Chondrostereum purpureum (Silverleaf fungus) is a saprotroph and plant pathogen commercially used for combatting forest “weed” trees in vegetation management. However, little is known about its lignocellulose-degrading capabilities and the enzymatic machinery that is responsible for the degradative potential, and it is not yet clear to which group of wood-rot fungi it actually belongs. Here, we sequenced and analyzed the draft genome of C. purpureum (41.2 Mbp) and performed a quantitative proteomic approach during growth in submerged and solid-state cultures based on soybean meal suspension or containing beech wood supplemented with phenol-rich olive mill residues, respectively. The fungus harbors characteristic lignocellulolytic hydrolases (GH6 and GH7) and oxidoreductases (e.g. laccase, heme peroxidases). High abundance of some of these genes (e.g. 45 laccases, nine GH7) can be explained by gene expansion, e.g. identified for the laccase orthogroup ORTHOMCL11 that exhibits a total of 18 lineage-specific duplications. Other expanded genes families encode for proteins more related to a pathogenic lifestyle (e.g. protease and cytochrome P450s). The fungus responds to the presence of complex growth substrates (lignocellulose, phenolic residues) by the secretion of most of these lignocellulolytic and lignin-modifying enzymes (e.g. alcohol and aryl alcohol oxidases, laccases, GH6, GH7). Based on the genetic and enzymatic constitution, we consider the ‘marasmioid’ fungus C. purpureum as a ‘phytopathogenic’ white-rot fungus (WRF) that possesses a complex extracellular enzyme machinery to accomplish efficient lignocellulose degradation during both saprotrophic and phytopathogenic life phases. [ABSTRACT FROM AUTHOR]

Deadwood is an important structural component in forest ecosystems and plays a significant role in global carbon and nutrient cycling. Relatively little is known about the formation and decomposition of CWD by microbial communities in situ and about the factors controlling the associated processes. In this study, we intensively analyzed the molecular fungal community composition and species richness in relation to extracellular enzyme activity and differences in decomposing sapwood and heartwood of 13 temperate tree species (four coniferous and nine deciduous species, log diameter 30–40 cm and 4 m long) in an artificial experiment involving placing the logs on the forest soil for six years. We observed strong differences in the molecular fungal community composition and richness among the 13 tree species, and specifically between deciduous and coniferous wood, but unexpectedly no difference was found between sapwood and heartwood. Fungal species richness correlated positively with wood extractives and negatively with fungal biomass. A distinct fungal community secreting lignocellulolytic key enzymes seemed to dominate the decomposition of the logs in this specific phase. In particular, the relative sequence abundance of basidiomycetous species of the Meruliaceae (e.g. Bjerkandera adusta) correlated with ligninolytic manganese peroxidase activity. Moreover, this study reveals abundant white-rot causing Basidiomycota and soft-rot causing Ascomycota during this phase of wood decomposition. [ABSTRACT FROM AUTHOR]

Mulching is a widely employed soil management practice. The mulches used have variable effects on the soil properties and plant growth. In China, mulches are used to cover bare soil at a few places in landscapes, where most of the soil is uncovered, especially in tree pits. As to improve our understanding on the effect of various mulches on soil properties and tree growth after two years of the treatment justifying its implication in soil fertility and tree growth. A comparison study was conducted to determine the effects of inorganic (cobblestone—CB; water permeable brick—WPB), organic (pine bark—PB; green waste compost—GWC), and living (turf grass—TG) mulches on soil physical and chemical properties at three different depths (0–10 cm, 10–20 cm, and 20–40cm), and on tree growth (Sophora japonica) in urban tree pits. Soil moisture was measured once a month in 2015.The soil samples were collected from the tree pits two years after mulching and used to evaluate the physical and chemical properties. Further, trunk diameter and tree height were determined once a year. During the most months, all types of mulches significantly affected the moisture content of the soil at all the depths analyzed. In July and August, however, the moisture content of PB and TG treated soil decreased when compared with that of unmulched bare soil. Two years after mulching, the bulk density of the soil treated with PB, GWC, and TG was significantly affected at10–20 cm, with GWC exhibiting a relatively better effect. The treatments with PB, GWC, and TG also improved the total porosity, macroporosity, and microporosity of the soil at lower depths. Further, WPB worsened the bulk density and porosity of the soil, elevating the pH at lower depths. The organic matter, total N, mineral N, available P, and available K contents of the soil at lower depths increased when mulched with organic material. Turf grass significantly increased only the total N and available K at 0–10 and 10–20 cm. There was no significant difference in the soil properties among the treatments at 20–40 cm. Furthermore, the trunk diameter and tree height were not affected by the mulches two years after mulching. In conclusion, organic mulches especially GWC, not only increased soil fertility significantly but improved soil physical characters (0–10 cm depth) comparing to other mulches, are suitable to cover bare soil in urban tree pits. [ABSTRACT FROM AUTHOR]

Cerrena unicolor is a wood-degrading basidiomycete with ecological and biotechnological importance. Comprehensive Biolog-based analysis was performed to assess the metabolic capabilities and sensitivity to chemicals of C. unicolor FCL139 growing in various sawdust substrates and light conditions. The metabolic preferences of the fungus towards utilization of specific substrates were shown to be correlated with the sawdust medium applied for fungus growth and the light conditions. The highest catabolic activity of C. unicolor was observed after fungus precultivation on birch and ash sawdust media. The fungus growing in the dark showed the highest metabolic activity which was indicated by capacity to utilize a broad spectrum of compounds and the decomposition of 74/95 of the carbon sources. In all the culture light conditions, p-hydroxyphenylacetic acid was the most readily metabolized compound. The greatest tolerance to chemicals was also observed during C. unicolor growth in darkness. The fungus was the most sensitive to nitrogen compounds and antibiotics, but more resistant to chelators. Comparative analysis of C. unicolor and selected wood-decay fungi from different taxonomic and ecological groups revealed average catabolic activity of the fungus. However, C. unicolor showed outstanding capabilities to catabolize salicin and arbutin. The obtained picture of C. unicolor metabolism showed that the fungus abilities to decompose woody plant material are influenced by various environmental factors. [ABSTRACT FROM AUTHOR]

The present work determines the chemical and thermal characteristics as well as the phytochemical and antioxidant potential of the polar extractives of the Picea abies bark from an industrial mill, their wood and bark components and also different bark fractions obtained by mechanical fractionation (fine B1, Φ<0.180 mm, medium B3, 0.450 < Φ<0.850 mm and coarse B6, 2 < Φ<10 mm). The aim is to increase the knowledge on the Picea abies bark to better determine possible uses other than burning for energy production and to test an initial size reduction process to achieve fractions with different characteristics. Compared to wood, bark presented similar lignin (27%), higher mineral (3.9% vs 0.4%) and extractives (20.3% vs 3.8%) and lower polysaccharides (48% vs 71%) contents. Regarding bark fractions the fines showed higher ash (6.3%), extractives (25%) and lignin (29%) than the coarse fraction (3.9%, 19% and 25% respectively). Polysaccharide contents increased with particle size of the bark fractions (38% vs 52% for B1 and B6) but showed the same relative composition. The phytochemical profile of ethanol and water extracts presented higher contents for bark than wood of total phenols (2x higher), flavonoids (3x higher) and tannins (4-10x higher) with an increasing tendency with particle size. Bark antioxidant activity was higher than that of wood for ferric-reducing antioxidant power (FRAP, 10 vs 6 mmolFe2+/gExt for the ethanol extract) and free radical scavenging activity (DPPH, 6 vs 18 mg/L IC50 for the ethanol extract) methods. The different bark fractions antioxidant activity was very similar. Bark thermal properties showed a much lower volatiles to fixed carbon ratio (V/FC) than wood (3.1 vs 5.2) although the same higher heating value (20.3 MJ/kg). The fractions were quite similar. Bark presented chemical features that point to their possible upgrade, whether by taking advantage of the high extractives with bioactive compounds or the production potential for hemicellulose-derived oligomers with possible use in nutraceutical and pharmaceutical industries. [ABSTRACT FROM AUTHOR]

Increasing organic carbon sequestration in agricultural soils is important for improving soil fertility and mitigating climate change. Wood ash is generally applied as a potassium fertilizer, but the effects of simultaneous incorporation of wood ash and crop straw on the turnover of soil organic carbon (SOC) and inorganic carbon (SIC) are not well understood. In this study, a 118-day lab incubation experiment was conducted using a calcareous soil (with 10 years of continuous maize cropping history) to study the effects of adding wheat straw, wood ash and lime. Our study showed that straw addition led to an increase in both SOC (19%) and SIC (3%). Wood ash and lime addition decreased CO2 emission by 182 and 1210 mg kg-1 and increased SIC by 125 and 1001 mg kg-1 during the incubation, respectively, which was due to supply of CaO from wood ash and lime. The increase of SOC content was 2.4% due to the addition of lime. In addition to straw addition enhanced straw-derived OC content, the addition of lime also increased straw-derived OC content by 34.5%. This study demonstrated that lime was more effective in reducing CO2 emission and and enhancing SOC than wood ash. In conclusion, adding lime to calcareous soil might be an effective method of enhancing carbon sequestration and slowing climate change. [ABSTRACT FROM AUTHOR]

During industrial wood drying, extractives migrate towards the wood surfaces and make the material more susceptible to photo/biodegradation. The present work provides information about the distribution, quantity and nature of lipophilic substances beneath the surface in air- and kiln-dried Scots pine (Pinus sylvestris L.) sapwood boards. Samples were taken from knot-free sapwood surfaces and the composition of lipophilic extractives, phenols and low-molecular fatty/resin acids layers at different nominal depths below the surface was studied gravimetrically, by UV-spectrometry and by gas chromatography-mass spectrometry (GC-MS). The concentration of total extractives was significantly higher in kiln-dried than in air-dried samples and was higher close to the surface than in the layers beneath. The scatter in the values for the lipophilic extractives was high in both drying types, being highest for linoleic acid and slightly lower for palmitic, oleic and stearic acids. The amount of fatty acids was low in kiln-dried boards, probably due to a stronger degradation due to the high temperature employed. The most abundant resin acid was dehydroabietic acid followed by pimaric, isopimaric, and abietic acids in both drying types. It is concluded that during kiln-drying a migration front is created at a depth of 0.25 mm with a thickness of about 0.5 mm. [ABSTRACT FROM AUTHOR]

The industrial production of long-lived charcoal products (commonly referred to as biochar) from otherwise shorter-lived logging resides (commonly referred to a slash) has been proposed as a means to increasing terrestrial carbon storage thus mitigating global warming caused by anthropogenic greenhouse gas emissions. We present a generalized model that describes the temporal dynamics of biochar carbon stocks, relative to carbon of unmodified logging residue, and evaluate the sensitivity of carbon storage to various biophysical and production parameters. Using this model, we then attribute net carbon storage to several potential biochar production scenarios, specifically engineered to use wood recovered from harvests prescribed to reduce fire hazard in mixed-conifer forests of South-central Oregon. Relative to a baseline scenario where logging residue is left to decay on site, the net carbon storage attributed to 20 years of biochar production is generally negative for the first several decades, then remains positive for several centuries at levels approximately one-fourth the total feedstock carbon processed. Positive net carbon storage and the time required for it to manifest is notably sensitive to biochar conversion efficiencies, logging residue decay rates, and alternate baseline fates of logging residue. The magnitude of net carbon storage, and the time required for it to become positive, is largely similar across range of production facility types. Moreover, the time required for net carbon storage to become positive, and its magnitude over the first 100 years is notably insensitive to biochar decomposition rates provided biochar decays at least ten-times slower than the logging residue it is made from. [ABSTRACT FROM AUTHOR]

A series of experiments were conducted to assess the machinability of high density fiberboard using cemented carbide cutting tools. The objective of this work was to investigate the influence of two cutting parameters, spindle speed and feed per turn, on cutting forces, chip formation and cutting quality. The results are as follows: cutting forces and chip-breaking length decrease with increasing spindle speed and decreasing feed per turn. In contrast, surface roughness increases with decrease of spindle speed and increase in feed per turn. Chips were divided into four categories based on their shape: dust, particle, splinter, and semicontinuous chips. Chip-breaking length had a similar tendency to the variance of cutting forces with respect to average roughness and mean peak-to-valley height: an increase in the variance of cutting forces resulted in increased average roughness and mean peak-to-valley height. Thus, high cutting speed and low feed rate are parameters suitable for high-quality HDF processing and will improve not only machining quality, but production efficiency. [ABSTRACT FROM AUTHOR]

Rhus verniciflua is commonly known as a lacquer tree in Korea. The bark of R. verniciflua has been used as an immunostimulator in traditional medicine, but also causes allergic dermatitis due to urushiol derivatives. For the development of active natural resources with less toxicity, the antibacterial activity of various parts of R. verniciflua such as bark, lignum, leaves and fruit, together with chemical composition, were investigated. Among the various parts of R. verniciflua, lignum showed the most potent antibacterial activity against fish pathogenic bacteria such as Edwardsiella tarda, Vibrio anguillarum and Streptococcus iniae. Measurement of total phenolic content and flavonoid content clearly showed a high content of phenolic and flavonoids in lignum among the various parts of R. verniciflua. Further analysis showed a close correlation between antibacterial activity and phenolic content. In addition, methyl gallate and fustin, the major constituents of bark and lignum, showed antibacterial activity, which suggested phenolic constituents as active constituents. The content of urushiols, however, was highest in bark, but there was a trace amount in lignum. LC-MS-MS and PCA analysis showed good discrimination with the difference of phenolic composition in various parts of R. verniciflua. Taken together, phenolic compounds are responsible for the antibacterial activity of R. verniciflua. The lignum of R. verniciflua contains high content of phenolic compounds with less urushiols, which suggests efficient antibacterial activity with less toxicity. Therefore, the lignum of R. verniciflua is suggested as a good source for antibacterial material to use against fish bacterial diseases. [ABSTRACT FROM AUTHOR]

The distribution and biosynthesis of boswellic acids (BAs) is scarce in current literature. Present study aims to elucidate the BAs biosynthetic and its diversity in the resins of Boswellia sacra and Boswellia papyrifera. Results revealed the isolation of new (3β, 11β-dihydroxy BA) and recently known (as new source, β-boswellic aldehyde) precursors from B. sacra resin along with α-amyrin. Following this, a detailed nomenclature of BAs was elucidated. The quantification and distribution of amyrins (3-epi-α-amyrin, β-amyrin and α-amyrin) and BAs in different Boswellia resins showed highest amyrin and BAs in B. sacra as compared with B. serrata and B. papyrifera. Distribution of BAs significantly varied in the resin of B. sacra collected from dry mountains than coastal trees. In B. sacra, high content of α-amyrin was found in the roots but it lacked β-amyrin and BAs. The leaf part showed traces of β-ABA and AKBA but was deficient in amyrins. This was further confirmed by lack of transcript accumulation of amyrin-related biosynthesis gene in leaf part. In contrast, the stem showed presence of all six BAs which are attributed to existence of resin-secretory canals. In conclusion, the boswellic acids are genus-specific chemical constituents for Boswellia species albeit the variation of the amounts among different Boswellia species and grades. [ABSTRACT FROM AUTHOR]

The bark from Quercus faginea mature trees from two sites was chemically characterized for the first time. The barks showed the following composition: ash 14.6%, total extractives 13.2%, suberin 2.9% and lignin 28.2%. The polysaccharides were composed mainly of glucose and xylose (50.3% and 35.1% of all monosaccharides respectively) with 4.8% of uronic acids. The suberin composition was: ω-hydroxyacids 46.3% of total compounds, ɑ,ω-alkanoic diacids 22.3%, alkanoic acids 5.9%, alkanols 6.7% and aromatics 6.9% (ferulic acid 4.0%). Polar extracts (ethanol-water) had a high phenolic content of 630.3 mg of gallic acid equivalents (GAE)/g of extract, condensed tannins 220.7 mg of catechin equivalents (CE)/g extract, and flavonoids 207.7 mg CE/g of extract. The antioxidant activity was very high corresponding to 1567 mg Trolox equivalents/g of extract, and an IC50 of 2.63 μg extract/ml. The lipophilic extracts were constituted mainly by glycerol and its derivatives (12.3% of all compounds), alkanoic acids (27.8%), sterols (11.5%) and triterpenes (17.8%). In view of an integrated valorization, Quercus faginea barks are interesting sources of polar compounds including phenols and polyphenols with possible interesting bioactivities, while the sterols and triterpenes contained in the lipophilic extracts are also valuable bioactive compounds or chemical intermediates for specific high-value market niches, such as cosmetics, pharmaceuticals and biomedicine. [ABSTRACT FROM AUTHOR]

The recent mountain pine beetle outbreak in western Canada provides an opportunity to study the selection and heritability of tree defenses. We examined terpenoid-based defenses of seedling lodgepole pines which were offspring of mature trees subjected to high levels of mountain pine beetle selective pressure. Seedlings were grown from one of three types of cones: old cones on live trees; young cones on live trees; and cones on trees killed by beetles. Offspring thus represented crosses of non-surviving (NS) x surviving (S), S x S, and NS x NS parents, respectively. Methyl jasmonate was used to induce a defensive reaction in the seedlings. Seed source had a significant effect on levels of ten different terpenes, but not on total terpene concentrations. When the seedlings were grouped by location and treatment type, the seedlings of different cone types could be almost entirely distinguished by terpene profiles. [ABSTRACT FROM AUTHOR]

A high reactivity and leaving no harmful residues make ozone an effective disinfectant for farm hygiene and biosecurity. Our objectives were therefore to (1) characterize the killing capacity of aqueous and gaseous ozone at different operational conditions on dairy cattle manure-based pathogens (MBP) contaminated different surfaces (plastic, metal, nylon, rubber, and wood); (2) determine the effect of microbial load on the killing capacity of aqueous ozone. In a crossover design, 14 strips of each material were randomly assigned into 3 groups, treatment (n = 6), positive-control (n = 6), and negative-control (n = 2). The strips were soaked in dairy cattle manure with an inoculum level of 107–108 for 60 minutes. The treatment strips were exposed to aqueous ozone of 2, 4, and 9 ppm and gaseous ozone of 1and 9 ppm for 2, 4, and 8 minutes exposure. 3M™ Petrifilm™ rapid aerobic count plate and plate reader were used for bacterial culture. On smooth surfaces, plastic and metal, aqueous ozone at 4 ppm reduced MBP to a safe level (≥5-log10) within 2 minutes (6.1 and 5.1-log10, respectively). However, gaseous ozone at 9 ppm for 4 minutes inactivated 3.3-log10 of MBP. Aqueous ozone of 9 ppm is sufficient to reduce MBP to a safe level, 6.0 and 5.4- log10, on nylon and rubber surfaces within 2 and 8 minutes, respectively. On complex surfaces, wood, both aqueous and gaseous ozone at up to 9 ppm were unable to reduce MBP to a safe level (3.6 and 0.8-log10, respectively). The bacterial load was a strong predictor for reduction in MBP (P<0.0001, R2 = 0.72). We conclude that aqueous ozone of 4 and 9 ppm for 2 minutes may provide an efficient method to reduce MBP to a safe level on smooth and moderately rough surfaces, respectively. However, ozone alone may not an adequate means of controlling MBP on complex surfaces. [ABSTRACT FROM AUTHOR]

When standing dead trees (snags) fall, they have major impacts on forest ecosystems. Snag fall can redistribute wildlife habitat and impact public safety, while governing important carbon (C) cycle consequences of tree mortality because ground contact accelerates C emissions during deadwood decay. Managing the consequences of altered snag dynamics in changing forests requires predicting when snags fall as wood decay erodes mechanical resistance to breaking forces. Previous studies have pointed to common predictors, such as stem size, degree of decay and species identity, but few have assessed the relative strength of underlying mechanisms driving snag fall across biomes. Here, we analyze nearly 100,000 repeated snag observations from boreal to subtropical forests across the eastern United States to show that wood decay controls snag fall in ways that could generate previously unrecognized forest-climate feedback. Warmer locations where wood decays quickly had much faster rates of snag fall. The effect of temperature on snag fall was so strong that in a simple forest C model, anticipated warming by mid-century reduced snag C by 22%. Furthermore, species-level differences in wood decay resistance (durability) accurately predicted the timing of snag fall. Differences in half-life for standing dead trees were similar to expected differences in the service lifetimes of wooden structures built from their timber. Strong effects of temperature and wood durability imply future forests where dying trees fall and decay faster than at present, reducing terrestrial C storage and snag-dependent wildlife habitat. These results can improve the representation of forest C cycling and assist forest managers by helping predict when a dead tree may fall. [ABSTRACT FROM AUTHOR]

Management of forest for wood production has altered ecosystem structures and processes and led to habitat loss and species extinctions, worldwide. Deadwood is a key resource supporting forest biodiversity, and commonly declines following forest management. However, different forest management methods affect dead wood differently. For example, uneven-aged silviculture maintains an age-stratified forest with ongoing dead wood production, while even-aged silviculture breaks forest continuity, leading to long periods without large trees. We asked how deadwood-dependent beetles respond to different silvicultural practices and if their responses depend on deadwood volume, and beetles preference for decay stages of deadwood. We compared beetle assemblages in five boreal forest types with different management strategies: clearcutting and thinning (both representing even-aged silviculture), selective felling (representing uneven-aged silviculture), reference and old growth forest (both uneven-aged controls without a recent history [~50 years] of management, but the latter with high conservation values). We collected beetles using window traps and by sieving the bark from experimental logs (bolts). Beetle assemblages on clear-cuts differed from all other stand types, regardless of trapping method or decay stage preference. Thinning differed from reference stands, indicating incomplete recovery after clear-cutting, while selective felling differed only from clear-cuts. In contrast to our predictions, early and late successional species responded similarly to different silvicultural practices. However, there were indications of marginal assemblage differences both between thinned stands and selective felling and between thinned and old growth stands (p = 0.10). The stand volume of early decay stage wood influenced assemblage composition of early, but not late successional species. Uneven-aged silviculture maintained species assemblages similar to those of the reference and old growth stands and might therefore be a better management option when considering biodiversity conservation. [ABSTRACT FROM AUTHOR]

Wood represents the most abundant biomass produced by plants and one of its major components is acetyl xylan. Acetylation in xylan can occur at O-2 or O-3 of a xylosyl residue, at both O-2 and O-3 of a xylosyl residue, and at O-3 of a xylosyl residue substituted at O-2 with glucuronic acid. Acetyltransferases responsible for the regiospecific acetylation of xylan in tree species have not yet been characterized. Here we report the biochemical characterization of twelve Populus trichocarpa DUF231-containing proteins, named PtrXOATs, for their roles in the regiospecific acetylation of xylan. The PtrXOAT genes were found to be differentially expressed in Populus organs and among them, PtrXOAT1, PtrXOAT2, PtrXOAT9 and PtrXOAT10 exhibited the highest level of expression in stems undergoing wood formation. Activity assays of recombinant proteins demonstrated that all twelve PtrXOAT proteins were able to transfer acetyl groups from acetyl CoA onto a xylohexaose acceptor with PtrXOAT1, PtrXOAT2, PtrXOAT3, PtrXOAT11 and PtrXOAT12 having the highest activity. Structural analysis of the PtrXOAT-catalyzed reaction products using 1H NMR spectroscopy revealed that PtrXOAT1, PtrXAOT2 and PtrXOAT3 mediated 2-O- and 3-O-monoacetylation and 2,3-di-O-acetylation of xylosyl residues and PtrXOAT11 and PtrXOAT12 only catalyzed 2-O- and 3-O-monoacetylation of xylosyl residues. Of the twelve PtrXOATs, only PtrXOAT9 and PtrXOAT10 were capable of transferring acetyl groups onto the O-3 position of 2-O-glucuronic acid-substituted xylosyl residues. Furthermore, when expressed in the Arabidopsis eskimo1 mutant, PtrXOAT1, PtrXAOT2 and PtrXOAT3 were able to rescue the defects in xylan acetylation. Together, these results demonstrate that the twelve PtrXOATs are acetyltransferases with different roles in xylan acetylation in P. trichocarpa. [ABSTRACT FROM AUTHOR]

The reasons why the range size of closely related species often varies significantly have intrigued scientists for many years. Among other hypotheses, species with high trait variation were suggested to occupy more diverse environments, have more continuity in their distributions, and consequently have larger range sizes. Here, using 34 tree species of lowlands tropical rainforest in southern Costa Rica, we explored whether inherent trait variability expressed at the local scale in functional traits is related to the species’ total geographical range size. We formed 17 congeneric pairs of one narrow endemic and one widespread species, sampled 335 individuals and measured eight functional traits: leaf area, leaf thickness, leaf dry matter content, specific leaf area, leaf nitrogen content, leaf phosphorus content, leaf nitrogen to phosphorus ratio, and wood specific gravity. We tested whether there are significant differences in the locally expressed variation of individual traits or in multidimensional trait variance between the species in congeneric pairs and whether species’ range size could hence be predicted from local trait variability. However, we could not find such differences between widely distributed and narrow range species. We discuss the possible reasons for these findings including the fact that higher trait variability of widespread species may result from successive local adaptations during range expansion and may hence often be an effect rather than the cause of larger ranges. [ABSTRACT FROM AUTHOR]

The bark of Anadenanthera peregrina (L.) Speg and Anadenanthera colubrina (Vell.) Brenan were characterized in relation to anatomical and chemical features. The barks were similar and included a thin conducting phloem, a largely dilated and sclerified non-conducting phloem, and a rhyridome with periderms with thin phellem interspersed by cortical tissues. Only small differences between species were observed that cannot be used alone for taxonomic purposes. The summative chemical composition of A. peregrina and A. colubrina was respectively: 8.2% and 7.7% ash; 28.8% and 29.3% extractives; 2.4% and 2.6% suberin; and 18.9% lignin. The monosaccharide composition showed the predominance of glucose (on average 82% of total neutral sugars) and of xylose (9%). The ethanol-water extracts of A. peregrina and A. colubrina barks included a high content of phenolics, respectively: total phenolics 583 and 682 mg GAE/g extract; 148 and 445 mg CE/g extract; tannins 587 and 98 mg CE/g extract. The antioxidant activity was 238 and 269 mg Trolox/g extract. The barks of the Anadenanthera species are a potential source of polar extractives that will represent an important valorization and therefore contribute to improve the overall economic potential and sustainability of A. peregrina and A. colubrina [ABSTRACT FROM AUTHOR]

Grapevine trunk diseases: Eutypa dieback, esca and Botryosphaeria dieback, which incidence has increased recently, are associated with several symptoms finally leading to the plant death. In the absence of efficient treatments, these diseases are a major problem for the viticulture; however, the factors involved in disease progression are not still fully identified. In order to get a better understanding of Botryosphaeria dieback development in grapevine, we have investigated different factors involved in Botryosphaeriaceae fungi aggressiveness. We first evaluated the activity of the wood-degrading enzymes of different isolates of Neofusicoccum parvum and Diplodia seriata, two major fungi associated with Botryosphaeria dieback. We further examinated the ability of these fungi to metabolize major grapevine phytoalexins: resveratrol and δ-viniferin. Our results demonstrate that Botryosphaeriaceae were characterized by differential wood decay enzymatic activities and have the capacity to rapidly degrade stilbenes. N. parvum is able to degrade parietal polysaccharides, whereas D. seriata has a better capacity to degrade lignin. Growth of both fungi exhibited a low sensitivity to resveratrol, whereas δ-viniferin has a fungistatic effect, especially on N. parvum Bourgogne S-116. We further show that Botryosphaeriaceae are able to metabolize rapidly resveratrol and δ-viniferin. The best stilbene metabolizing activity was measured for D. seriata. In conclusion, the different Botryosphaeriaceae isolates are characterized by a specific aggressiveness repertory. Wood and phenolic compound decay enzymatic activities could enable Botryosphaeriaceae to bypass chemical and physical barriers of the grapevine plant. The specific signature of Botryosphaeriaceae aggressiveness factors could explain the importance of fungi complexes in synergistic activity in order to fully colonize the host. [ABSTRACT FROM AUTHOR]

Fomitopsis pinicola is a species of Polyporales frequently encountered in Nordic temperate and boreal forests. In nature, the fungus causes destructive brown rot in wood, colonizing tree trunks often occupied by other Basidiomycota species. We mimicked these species-species interactions by introducing F. pinicola to five white rot species, all common saprotrophs of Norway spruce. Hyphal interactions and mycelial growth in various combinations were recorded, while activities of lignocellulose-acting CAZymes and oxidoreductases were followed in co-cultures on two different carbon-source media. Of the species, Phlebia radiata and Trichaptum abietinum were the strongest producers of lignin-modifying oxidoreductases (laccase, manganese peroxidase) when evaluated alone, as well as in co-cultures, on the two different growth media (low-nitrogen liquid medium containing ground coniferous wood, and malt extract broth). F. pinicola was an outstanding producer of oxalic acid (up to 61 mM), whereas presence of P. radiata prevented acidification of the growth environment in the liquid malt-extract cultures. When enzyme profiles of the species combinations were clustered, time-dependent changes were observed on wood-supplemented medium during the eight weeks of growth. End-point acidity and production of mycelium, oxalic acid and oxidoreductase activities, in turn clustered the fungal combinations into three distinct functional groups, determined by the presence of F. pinicola and P. radiata, by principal component analysis. Our findings indicate that combinations of wood-decay fungi have dramatic dynamic effects on the production of lignocellulose-active enzymes, which may lead to divergent degradative processes of dead wood and forest litter. [ABSTRACT FROM AUTHOR]

Introduction: Humans are exposed to aldehydes in a variety of environmental situations. Aldehydes generally have a strong odor and are highly irritating to the mucous membranes. Knowledge about odor perception and especially irritation potency in humans is thus essential in risk assessment and regulation, e.g. setting occupational exposure limits. However, data on odor and irritation are lacking or limited for several aldehydes. The aim of the study was to determine the odor and lateralization thresholds of some commonly occurring aldehydes. Acrolein and crotonaldehyde where chosen as they are formed when organic material is heated or burned, e.g. during cigarette smoking. n-Hexanal was also included as it is emitted from wood pellets and fibreboard. Material and methods: To study odor and lateralization thresholds of these aldehydes, a novel, inexpensive olfactometer was designed to enable delivery of reliable and stable test concentrations and thus valid measures of thresholds. The delivery system consists of seven syringe pumps, each connected to a Tedlar bag containing a predefined concentration of the tested aldehyde vapor. To validate the threshold measures, a test-retest was performed with a separate method, namely odor delivery via amber bottles. Twenty healthy naïve individuals were tested. Results: The median odor thresholds of acrolein, crotonaldehyde and hexanal were 17, 0.8, and 97 ppb, respectively. No lateralization threshold could be identified for acrolein (highest tested concentration was 2 940 ppb in 5 subjects), whereas the medians were 3 and 390 ppb for the latter two. In addition, odor thresholds for n-hexanal were also determined using two methods where similar results were obtained, suggesting that the olfactometer presentation method is valid. Conclusion: We found olfactory detection and lateralization thresholds (except for acrolein) in alliance with, or lower than, previously reported in naïve subjects. The new olfactometer allows better control of presentations timing and vapor concentration. [ABSTRACT FROM AUTHOR]

Consistent pixel sizes are of fundamental importance for assessing texture features that relate intensity and spatial information in radiomics studies. To correct for the effects of variable pixel sizes, we combined image resampling with Butterworth filtering in the frequency domain and tested the correction on computed tomography (CT) scans of lung cancer patients reconstructed 5 times with pixel sizes varying from 0.59 to 0.98 mm. One hundred fifty radiomics features were calculated for each preprocessing and field-of-view combination. Intra-patient agreement and inter-patient agreement were compared using the overall concordance correlation coefficient (OCCC). To further evaluate the corrections, hierarchical clustering was used to identify patient scans before and after correction. To assess the general applicability of the corrections, they were applied to 17 CT scans of a radiomics phantom. The reduction in the inter-scanner variability relative to non–small cell lung cancer patient scans was quantified. The variation in pixel sizes caused the intra-patient variability to be large (OCCC <95%) relative to the inter-patient variability in 79% of the features. However, with the resampling and filtering corrections, the intra-patient variability was relatively large in only 10% of the features. With the filtering correction, 8 of 8 patients were correctly clustered, in contrast to only 2 of 8 without the correction. In the phantom study, resampling and filtering the images of a rubber particle cartridge substantially reduced variability in 61% of the radiomics features and substantially increased variability in only 6% of the features. Surprisingly, resampling without filtering tended to increase the variability. In conclusion, applying a correction based on resampling and Butterworth low-pass filtering in the frequency domain effectively reduced variability in CT radiomics features caused by variations in pixel size. This correction may also reduce the variability introduced by other CT scan acquisition parameters. [ABSTRACT FROM AUTHOR]

The gradual elimination of chromium from wood preservative formulations results in higher Cu leaching and increased susceptibility to wood decay fungi. Finding a sustainable strategy in wood protection has become of great interest among researchers. The objective of these in vitro studies was to demonstrate the effect of T-720-enriched organic charcoal (biochar) against five wood decay basidiomycetes isolated from strongly damaged poles. For this purpose, the antagonistic potential of Trichoderma harzianum (strain T-720) was confirmed among other four Trichoderma spp. against five brown-rot basidiomycetes in dual culture tests. T-720 was genetically transformed and tagged with the green fluorescent protein (GFP) in order to study its antagonistic mechanism against wood decay basidiomycetes. It was also demonstrated that T-720 inhibits the oxalic acid production by basidiomycetes, a well-known mechanism used by brown-rot fungi to detoxify Cu from impregnated wood. Additionally, this study evaluated the effect of biochar, alone or in combination with T-720, on Cu leaching by different preservatives, pH stabilization and prevention of wood decay caused by five basidiomycetes. Addition of biochar resulted in a significant Cu binding released from impregnated wood specimens. T-720-enriched biochar showed a significant reduction of wood decay caused by four basidiomycetes. The addition of T-720-enriched biochar to the soil into which utility poles are placed may improve the efficiency of Cr-free wood preservatives. [ABSTRACT FROM AUTHOR]

Little information has been available on the shifts in the microbial community in decaying fallen logs during critical periods in cold forests. Minjiang fir (Abies faxoniana) fallen logs in decay classes I-V were in situ incubated on the forest floor of an alpine forest in the eastern Tibet Plateau. The microbial community was investigated during the seasonal snow cover period (SP), snow thawing period (TP), early growing season (EG) and late growing season (LG) using Phosphorous Lipid Fatty Acid (PLFA) analysis. Total microbial biomass and microbial diversity in fallen logs were much more affected by critical period than decay class, whereas decay class had a stronger effect on microbial diversity than on microbial biomass. Abundant microbial biomass and microbial diversity in logs even without the cover of snow were observed in winter, which could not be linked to thermal insulation by snow cover. The freshly decayed logs functioned as an excellent buffer of environmental variation for microbial organisms during the sharp fluctuations in temperature in winter. We also found distinct decay patterns along with seasonality for heartwood, sapwood and bark, which requires further detailed research. Gram- bacteria mainly dominated the shifts in microbial community composition from SP to EG, while fungi and Gram+ bacteria mainly dominated it from SP to TP. Based on previous work and the present study, we conclude that fallen logs on the forest floor alter ecological processes by influencing microbial communities on woody debris and beneath the soil and litter. Our study also emphasizes the need to maintain a number of fallen logs, especially fresh ones, on the forest floor. [ABSTRACT FROM AUTHOR]

Heartwood and sapwood of Quercus faginea were evaluated in relation to summative chemical composition and non-polar and polar extracts composition, including an assessment of antioxidant properties (DPPH and FRAP). Twenty trees from two sites in Portugal were analysed. Heartwood had approximately two times more solvent extractible compounds than sapwood (on average 19.0% and 9.5%). The lipophilic extractible compounds were below 1%, and most of them were polar e.g. ethanol-soluble compounds corresponded to 65% of total extractives in heartwood and 43% in sapwood. Lignin content was similar in sapwood and heartwood (28.1% and 28.6% of extractive-free wood respectively) as well as the sugar composition. Site did not influence the chemical composition. The lipophilic extractible compounds from both sapwood and heartwood included mainly saturated fatty acids (23.0% and 36.9% respectively) and aromatic compounds were also abundant in sapwood (22.9%). The ethanol-water extractibles had a high content of phenolic substances (558.0 and 319.4 mg GAE/g extract, respectively of heartwood and sapwood). The polyphenolic composition was similar in heartwood and sapwood with higher content of ellagitannins (168.9 and 153.5 mg tannic acid/g of extract in sapwood and heartwood respectively) and very low content of condensed tannins. The antioxidant activity was very high with IC50 of 2.6 μg/ml and 3.3 μg/ml for sapwood and heartwood respectively, as compared to standard antioxidants (IC50 of 3.8 μg/ml for Trolox). The ferric reducing ability was 2.8 and 2.0 mMol Trolox equivalents/g extract of heartwood and sapwood respectively. The variability between trees was low and no differences between the two sites were found. Q. faginea showed a very good potential for cooperage and other applications for which a source of compounds with antioxidant properties is desirable. [ABSTRACT FROM AUTHOR]

Biochar production and use are part of the modern agenda to recycle wastes, and to retain nutrients, pollutants, and heavy metals in the soil and to offset some greenhouse gas emissions. Biochars from wood (eucalyptus sawdust, pine bark), sugarcane bagasse, and substances rich in nutrients (coffee husk, chicken manure) produced at 350, 450 and 750°C were characterized to identify agronomic and environmental benefits, which may enhance soil quality. Biochars derived from wood and sugarcane have greater potential for improving C storage in tropical soils due to a higher aromatic character, high C concentration, low H/C ratio, and FTIR spectra features as compared to nutrient-rich biochars. The high ash content associated with alkaline chemical species such as KHCO3 and CaCO3, verified by XRD analysis, made chicken manure and coffee husk biochars potential liming agents for remediating acidic soils. High Ca and K contents in chicken manure and coffee husk biomass can significantly replace conventional sources of K (mostly imported in Brazil) and Ca, suggesting a high agronomic value for these biochars. High-ash biochars, such as chicken manure and coffee husk, produced at low-temperatures (350 and 450°C) exhibited high CEC values, which can be considered as a potential applicable material to increase nutrient retention in soil. Therefore, the agronomic value of the biochars in this study is predominantly regulated by the nutrient richness of the biomass, but an increase in pyrolysis temperature to 750°C can strongly decrease the adsorptive capacities of chicken manure and coffee husk biochars. A diagram of the agronomic potential and environmental benefits is presented, along with some guidelines to relate biochar properties with potential agronomic and environmental uses. Based on biochar properties, research needs are identified and directions for future trials are delineated. [ABSTRACT FROM AUTHOR]

The objective of this study was to investigated the use of chemometric modeling of thermogravimetric (TG) data as an alternative approach to estimate the chemical and proximate (i.e. volatile matter, fixed carbon and ash contents) composition of lignocellulosic biomass. Since these properties affect the conversion pathway, processing costs, yield and / or quality of products, a capability to rapidly determine these for biomass feedstock entering the process stream will be useful in the success and efficiency of bioconversion technologies. The 38-minute long methodology developed in this study enabled the simultaneous prediction of both the chemical and proximate properties of forest-derived biomass from the same TG data. Conventionally, two separate experiments had to be conducted to obtain such information. In addition, the chemometric models constructed with normalized TG data outperformed models developed via the traditional deconvolution of TG data. PLS and PCR models were especially robust in predicting the volatile matter (R2–0.92; RPD– 3.58) and lignin (R2–0.82; RPD– 2.40) contents of the biomass. The application of chemometrics to TG data also made it possible to predict some monomeric sugars in this study. Elucidation of PC loadings obtained from chemometric models also provided some insights into the thermal decomposition behavior of the chemical constituents of lignocellulosic biomass. For instance, similar loadings were noted for volatile matter and cellulose, and for fixed carbon and lignin. The findings indicate that common latent variables are shared between these chemical and thermal reactivity properties. Results from this study buttresses literature that have reported that the less thermally stable polysaccharides are responsible for the yield of volatiles whereas the more recalcitrant lignin with its higher percentage of elementary carbon contributes to the yield of fixed carbon. [ABSTRACT FROM AUTHOR]

Sinking of large organic food falls i.e. kelp, wood and whale carcasses to the oligotrophic deep-sea floor promotes the establishment of locally highly productive and diverse ecosystems, often with specifically adapted benthic communities. However, the fragmented spatial distribution and small area poses challenges for the dispersal of their microbial and faunal communities. Our study focused on the temporal dynamics and spatial distributions of sunken wood bacterial communities, which were deployed in the vicinity of different cold seeps in the Eastern Mediterranean and the Norwegian deep-seas. By combining fingerprinting of bacterial communities by ARISA and 454 sequencing with in situ and ex situ biogeochemical measurements, we show that sunken wood logs have a locally confined long-term impact (> 3y) on the sediment geochemistry and community structure. We confirm previous hypotheses of different successional stages in wood degradation including a sulphophilic one, attracting chemosynthetic fauna from nearby seep systems. Wood experiments deployed at similar water depths (1100–1700 m), but in hydrographically different oceanic regions harbored different wood-boring bivalves, opportunistic faunal communities, and chemosynthetic species. Similarly, bacterial communities on sunken wood logs were more similar within one geographic region than between different seas. Diverse sulphate-reducing bacteria of the Deltaproteobacteria, the sulphide-oxidizing bacteria Sulfurovum as well as members of the Acidimicrobiia and Bacteroidia dominated the wood falls in the Eastern Mediterranean, while Alphaproteobacteria and Flavobacteriia colonized the Norwegian Sea wood logs. Fauna and bacterial wood-associated communities changed between 1 to 3 years of immersion, with sulphate-reducers and sulphide-oxidizers increasing in proportion, and putative cellulose degraders decreasing with time. Only 6% of all bacterial genera, comprising the core community, were found at any time on the Eastern Mediterranean sunken wooden logs. This study suggests that biogeography and succession play an important role for the composition of bacteria and fauna of wood-associated communities, and that wood can act as stepping-stones for seep biota. [ABSTRACT FROM AUTHOR]

Residential wood combustion is the main source of elevated concentrations of fine particulate matter (PM2.5) during winter in many towns of Tasmania, Australia. A commercially available firebox catalyst in Australia has previously been shown to reduce visible smoke emissions and the manufacturer reports reductions in particle emissions generated from individual wood heaters in laboratory settings. This study aimed to evaluate the potential for community-wide distribution of the catalyst to improve the ambient winter air quality in the field. The study was set in four rural towns in northern Tasmania with similar topography, population size, and proportion of houses using wood heaters for space heating. Hourly PM2.5 concentrations and meteorological conditions were monitored in all locations by fixed stations from May-September, 2013 and 2014. In June 2014, residents of one town, Perth, were offered a free catalyst for placement in their fireboxes. A general linear model evaluated the impact of the intervention using an indicator variable adjusted for hourly conditions of weather. Almost 80% of wood heater owners in Perth accepted a catalytic device. However, no significant changes in ambient PM2.5 concentrations were associated with the catalyst trial. Future community-level research should address maintenance of the catalyst in the firebox, and the adequacy of conditions that facilitate catalysed combustion in individual heaters. [ABSTRACT FROM AUTHOR]