84 results on '"Tessarolo, Alberto"'
Search Results
2. Analytical Iron Loss Evaluation in the Stator Yoke of Slotless Surface-Mounted PM Machines.
3. Modeling, simulation, and experimental validation of a generation system for medium-voltage DC integrated power systems
4. Homothetic Design in Synchronous Reluctance Machines and Effects on Torque Ripple.
5. Fast Computation Method for Stator Winding Skin-Effect Additional Losses in Synchronous Machines With Open Slots and Arbitrary Rotor Geometry.
6. Design refinements of synchronous reluctance motor utilising non‐magnetic radial ribs for traction applications.
7. A New Method for the Accurate Prediction of On-Load Power Factor in Two-Pole Induction Motors Considering Shaft Eddy Currents.
8. Investigation Into Multi-Layer Fractional-Slot Concentrated Windings With Unconventional Slot-Pole Combinations.
9. Numerical and Analytical Approaches to the Modeling of a Spoke Type IPM Machine With Enhanced Flux Weakening Capability.
10. Enhanced Power Sharing Transient With Droop Controllers for Multithree-Phase Synchronous Electrical Machines.
11. A Novel Thyristor-Based CSI Topology With Multilevel Current Waveform for Improved Drive Performance.
12. Investigation into electrical resonance phenomena in the field circuit of wound-rotor synchronous machines.
13. Improved four-layer winding design for a 12-slot 10-pole permanent magnet machine using unequal tooth coils.
14. Design and testing of a new linear topology for electric machines.
15. Performance evaluation of a vehicle traction drive based on a Permanent Magnet synchronous motor equipped with a mechanical flux weakening device.
16. Design for Manufacturability of an Off-Shore Direct-Drive Wind Generator: An Insight Into Additional Loss Prediction and Mitigation.
17. Steady-State Simulation of LCI-Fed Synchronous Motor Drives Through a Computationally Efficient Algebraic Method.
18. Numerical multi-objective optimization of a squirrel cage induction motor for industrial application.
19. Improved analytical computation of rotor rectangular slot leakage inductance in squirrel-cage induction motors.
20. An algebraic approach to determine the current supply in a faulty 5-phase PM BLDC drive. Part I - model setup and its application to the case of one open phase fault.
21. An improved analytical expression for computing the leakage inductance of a circular bar in a semi-closed slot.
22. An algebraic approach to determine the current supply in a faulty 5-phase PM BLDC drive. Part II - application to the cases of two and three open phase faults.
23. Explicit Torque and Back EMF Expressions for Slotless Surface Permanent Magnet Machines With Different Magnetization Patterns.
24. An Algebraic Algorithm for Motor Voltage Waveform Prediction in Dual-LCI Drives With Interconnected DC-Links.
25. Analytical Computation of End-Coil Leakage Inductance of Round-Rotor Synchronous Machines Field Winding.
26. A New Method for Determining the Leakage Inductances of a Nine-Phase Synchronous Machine From No-Load and Short-Circuit Tests.
27. Analytical Determination of Slot Leakage Field and Inductances of Electric Machines With Double-Layer Windings and Semiclosed Slots.
28. LCI-fed wound-field synchronous motors: A technology status review and new development trends.
29. The Photovoltaic Laboratory at the University of Trieste, Italy.
30. Torque capabilities of a five-phase PM BLDC drive vs. a three-phase one and various supply modes.
31. Power electronics for all-electric ships with MVDC power distribution system: An overview.
32. An innovative environmentally-friendly full-electric drive solution for the actuation of shipboard loads: Analysis based on prototype testing results.
33. On the impact of photovoltaic module characterization on the prediction of PV plant productivity.
34. Design of an efficient starting circuit for LCI-fed synchronous motor drives.
35. Field oriented control of LCI-fed WFSM drives in stator flux reference frame.
36. Leakage Field Analytical Computation in Semiclosed Slots of Unsaturated Electric Machines.
37. Modeling and Analysis of Synchronous Reluctance Machines With Circular Flux Barriers Through Conformal Mapping.
38. Modeling, Analysis, and Testing of a Novel Spoke-Type Interior Permanent Magnet Motor With Improved Flux Weakening Capability.
39. Computationally Efficient Thermal Analysis of a Low-Speed High-Thrust Linear Electric Actuator With a Three-Dimensional Thermal Network Approach.
40. Analytical calculation of the no-load flux density in the stator core of slotless SPM machines.
41. Cogging torque fast computation method for Surface Permanent Magnet machines based on winding function theory.
42. Modeling of split-phase machines in Park's coordinates. Part II: Equivalent circuit representation.
43. Modeling of split-phase machines in Park's coordinates. Part I: Theoretical foundations.
44. Investigation Into the High-Frequency Limits and Performance of Load Commutated Inverters for High-Speed Synchronous Motor Drives.
45. Accurate Computation of Multiphase Synchronous Machine Inductances Based on Winding Function Theory.
46. Regenerative Testing of a Concentrated-Winding Permanent-Magnet Synchronous Machine for Offshore Wind Generation—Part I: Test Concept and Analysis.
47. Regenerative Testing of a Concentrated-Winding Permanent-Magnet Synchronous Machine for Offshore Wind Generation—Part II: Test Implementation and Results.
48. Use of Time-Harmonic Finite-Element Analysis to Compute Stator Winding Eddy-Current Losses Due to Rotor Motion in Surface Permanent-Magnet Machines.
49. Time-Stepping Finite-Element Analysis of a 14-MVA Salient-Pole Shipboard Alternator for Different Damper Winding Design Solutions.
50. Design and Testing of a 45-MW 100-Hz Quadruple-Star Synchronous Motor for a Liquefied Natural Gas Turbo-Compressor Drive.
Catalog
Books, media, physical & digital resources
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.