Search

Introduction: Prohibitin (PHB) is an essential scaffold protein that modulates signaling pathways controlling cell survival, metabolism, inflammation, and bone formation. However, its specific role in periodontium development remains less understood. This study aims to elucidate the expression pattern and function of PHB in periodontium development and its involvement in alveolar bone formation.Methods: Immunolocalization of PHB in the periodontium of postnatal (PN) mice were examined. Phb morpholino was micro-injected into the right-side mandible at PN5, corresponding to the position where the alveolar bone process forms in relation to the lower first molar. The micro-injection with a scramble control (PF-127) and the left-side mandibles were used as control groups. Five days post-micro-injection, immunohistochemical analysis and micro-CT evaluation were conducted to assess bone mass and morphological changes. Additionally, expression patterns of signaling molecules were examined following Phb downregulation using 24-h in vitro cultivation of developing dental mesenchyme at E14.5.Results: The immunostaining of PHB showed its localization in the periodontium at PN5, PN8, and PN10. The in vitro cultivation of dental mesenchyme resulted in alterations in Bmps, Runx2, and Wnt signalings after Phb knock-down. At 5 days post-micro-injection, Phb knocking down showed weak immunolocalizations of runt-related transcription factor (RUNX2) and osteocalcin (OCN). However, knocking down Phb led to histological alterations characterized by decreased bone mass and stronger localizations of Ki67 and PERIOSTIN in the periodontium compared 1 to control groups. The micro-CT evaluation showed decreased bone volume and increased PDL space in the Phb knock-down specimens, suggesting its regulatory role in bone formation.Discussion: The region-specific localization of PHB in the margin where alveolar bone forms suggests its involvement in alveolar bone formation and the differentiation of the periodontal ligament. Overall, our findings suggest that Phb plays a modulatory role in alveolar bone formation by harmoniously regulating bone-forming-related signaling molecules during periodontium development.

Periodontitis is known to be affected by high-glucose conditions, which poses a challenge to periodontal tissue regeneration, particularly in bone formation. In this study, the potential effects of resveratrol (3,5,4′-trihydroxystilbene, RSV) in facilitating bone formation under high-glucose conditions after periodontitis has been investigated. We focused on the analysis of osteoblasts and periodontal ligament cells, which are essential for bone formation including cell proliferation and differentiation. And we aimed to investigate the impact of RSV on bone healing, employed diabetic mouse model induced by streptozotocin and confirmed through histological observation. High-glucose conditions adversely affected cell proliferation and ALP activity in both MC3T3-E1 and hPDLF in vitro, with more significant impact on MC3T3-E1 cells. RSV under high-glucose conditions had positive effects on both, showing early-stage effects for MC3T3-E1 cells and later-stage effects for hPDLF cells. RSV seemed to have a more pronounced rescuing role in MC3T3-E1 cells. Increased ALP activity was observed and the expression levels of significant genes, such as Col 1, TGF-β1, ALP, and OC, in osteogenic differentiation were exhibited stage-specific expression patterns. Upregulated Col 1 and TGF-β1 were detected in the early stage, and then ALP and OC expressions became more pronounced in the later stages. Similarly, stronger positive reactions against RUNX2 were detected in the RSV-treated group compared to the control. Furthermore, in in vivo experiment, RSV stimulates the growth and differentiation of osteoblasts, thereby promoting bone formation. High-glucose levels have the potential to impair cellular functions and the regenerative capacity to facilitate bone formation with MC3T3-E1 rather than hPDLF cells. Resveratrol appears to facilitate the inherent abilities of MC3T3-E1 cells compared with hPDLF cells, indicating its potential capacity to restore functionality during periodontal regeneration.

Background and Objectives: The current study aimed to compare the extent of bone growth achieved after guided tissue regeneration (GTR) based on the location and nature of the initial periodontal lesion. Materials and Methods: The study sample included 80 patients who underwent GTR at Kyungpook National University Dental Hospital since 2012 and were radiologically followed up for at least 2 years after treatment. The patients were divided into four groups based on the location (maxilla and mandible) and nature (furcation involvement and intrabony defects) of the lesion. Differences in bone levels before and after treatment were analyzed. Additionally, a comparison of outcomes based on the type of bone graft material used was conducted. Statistical analysis included a comparison of groups using a t-test, assuming equal variance. Results: The proportion of bone growth observed in the maxillary furcation, mandibular furcation, maxillary intrabony, and mandibular intrabony lesions was 26%, 22%, 31%, and 34%, respectively. No statistically significant differences in the amount of bone fill were observed between the groups. However, a significant positive correlation was found between the initial depth of the bone defect and the amount of bone fill observed after treatment. Conclusions: Contrary to previous evidence, the current study observed no significant differences in the amount of bone fill after GTR based on the location and nature of the lesion. Furthermore, the amount of bone regenerated was directly proportional to the initial depth of the alveolar bone defect.

The purpose of this study was to investigate the effects of different peri-implantitis treatment methods (Er,Cr:YSGG laser, diode laser, and electrocautery) on various titanium implant surfaces: machined; sandblasted, large-grit, and acid-etched; and femtosecond laser-treated surfaces. Grade 4 titanium (Ti) disks, with a diameter of 10 mm and a thickness of 1 mm, were fabricated and treated using the aforementioned techniques. Subsequently, each treated group of disks underwent different peri-implantitis treatment methods: Er,Cr:YSGG laser (Biolase, Inc., Foothill Ranch, CA, USA), diode laser (Biolase, Inc., Foothill Ranch, CA, USA), and electrocautery (Ellman, Hicksville, NY, USA). Scanning electron microscopy, energy-dispersive X-ray spectroscopy, and wettability were used to characterize the chemical compositions and surfaces of the treated titanium surfaces. Significant changes in surface roughness were observed in both the electrocautery (Sa value of machined surface = 0.469, SLA surface = 1.569, femtosecond laser surface = 1.741, and p = 0.025) and Er,Cr:YSGG laser (Ra value of machined surface = 1.034, SLA surface = 1.380, femtosecond laser surface = 1.437, and p = 0.025) groups. On femtosecond laser-treated titanium implant surfaces, all three treatment methods significantly reduced the surface contact angle (control = 82.2°, diode laser = 74.3°, Er,Cr:YSGG laser = 73.8°, electrocautery = 76.2°, and p = 0.039). Overall, Er,Cr:YSGG laser and electrocautery treatments significantly altered the surface roughness of titanium implant surfaces. As a result of surface composition after different peri-implantitis treatment methods, relative to the diode laser and electrocautery, the Er,Cr:YSGG laser increased oxygen concentration. The most dramatic change was observed after Er:Cr;YSGG laser treatment, urging caution for clinical applications. Changes in surface composition and wettability were observed but were not statistically significant. Further research is needed to understand the biological implications of these peri-implantitis treatment methods.

This study evaluated the effects of various mechanical debridement methods on the surface roughness (Ra) of dental implants, comparing femtosecond laser-treated surfaces with conventionally machined and sandblasted with large-grit sand and acid-etched (SLA) implant surfaces. The fabrication of grade 4 titanium (Ti) disks (10 mm in diameter and 1 mm thick) and the SLA process were carried out by a dental implant manufacturer (DENTIS; Daegu, Republic of Korea). Subsequently, disk surfaces were treated with various methods: machined, SLA, and femtosecond laser. Disks of each surface-treated group were post-treated with mechanical debridement methods: Ti curettes, ultrasonic scaler, and Ti brushes. Scanning electron microscopy, Ra, and wettability were evaluated. Statistical analysis was performed using the Kruskal–Wallis H test, with post-hoc analyses conducted using the Bonferroni correction (α = 0.05). In the control group, no significant difference in Ra was observed between the machined and SLA groups. However, femtosecond laser-treated surfaces exhibited higher Ra than SLA surfaces (p < 0.05). The application of Ti curette or brushing further accentuated the roughness of the femtosecond laser-treated surfaces, whereas scaling reduced the Ra in SLA surfaces. Femtosecond laser-treated implant surfaces, with their unique roughness and compositional attributes, are promising alternatives in dental implant surface treatments.

Periodontitis is an excessive inflammatory event in tooth-supporting tissues and can cause tooth loss. We used erythropoietin (EPO), which has been reported to play an important role in bone healing and modulation of angiogenesis, as a therapeutic agent in vivo and in vitro experimental models to analyze its effect on periodontitis. First, EPO was applied to in vitro MC3T3-E1 cells and human periodontal ligament fibroblast (hPDLF) cells to examine its function in altered cellular events and gene expression patterns. In vitro cultivation of MC3T3-E1 and hPDLF cells with 10 IU/ml EPO at 24 and 48 h showed an obvious increase in cell proliferation. Interestingly, EPO treatment altered the expression of osteogenesis-related molecules, including alkaline phosphatase (ALP), bone morphogenetic protein-2 (BMP-2), and osteocalcin (OC) in MC3T3-E1 cells but not in hPDLF cells. In particular, MC3T3-E1 cells showed increased expression of ALP, BMP-2, and OC on day 5, while hPDLF cells showed increased expression of BMP-2, and OC on day 14. Based on the in vitro examination, we evaluated the effect of EPO on bone formation using an experimentally-induced animal periodontitis model. After the induction of periodontitis in the maxillary left second M, 10 IU/ml of EPO was locally applied to the extraction tooth sockets. Histomorphological examination using Masson’s trichrome (MTC) staining showed facilitated bone formation in the EPO-treated groups after 14 days. Similarly, stronger positive reactions against vascular endothelial growth factor (VEGF), cluster of differentiation 31 (CD31), runt-related transcription factor 2 (RUNX2), and osteocalcin (OC) were detected in the EPO-treated group compared to the control. Meanwhile, myeloperoxidase, an inflammatory marker, was decreased in the EPO-treated group on days 1 and 5. Overall, EPO facilitates bone healing and regeneration through altered signaling regulation and modulation of inflammation in the osteoblast cell lineage and to a lesser extent in hPDLF cells.

Background and Objectives: The purpose of this study is to assess the long-term maintenance of each approach of sinus elevation, the crestal approach and lateral approach, by comparing the radiographic results of each technique. Materials and Methods: In total, 103 patients who had undergone an implant procedure with either the crestal approach or lateral approach method applied to their maxillary molar edentulous area were included. Using orthopantomographs, the radiographic changes were consistently evaluated over 3 years after the procedure (immediately after procedure and 1 year, 2 years and 3 years after implant placement) Results: The radiographic evaluation after 3 years of implantation with sinus elevation showed a significant amount of bone formation (8.07 mm for crestal approach and 12.00 mm for lateral approach method). The largest amount of grafted height loss occurred during the 1 year, but the resorption was minimal (0.98 mm for crestal approach and 0.95 mm for lateral approach method) over the entire 3 years. Conclusions: Although the lateral approach showed more bone growth, the amount of bone resorption was similar to that of the crestal approach. Both methods showed the highest amount of bone resorption in the first year, and the amount of change thereafter was insignificant. It is judged that both methods can be used according to the situation to help implant placement.

The present study aimed to confirm the usefulness of a multi-laser handpiece system currently under development. Implants were placed in the tibia of rabbits using a conventional separate laser-implant handpiece system (control group; SurgicPro+; NSK, Kanuma, Japan and Epic 10; Biolase, Irvine, CA, USA) and a multi-laser handpiece system (experimental group; BLP 10; Saeshin, Daegu, Korea). Implants were placed in left and right tibias of five rabbits using a conventional laser-implant handpiece system and a multi-laser handpiece system (N = 5 per group). Subsequently, micro-computed tomography (micro-CT; bone-to-implant contact evaluation), implant stability quotient (ISQ) measurement, and histological evaluations were performed to confirm the implant placement results. The independent t-test and the paired t-test were used to compare the ISQ values and the results of the two implant-laser handpiece groups (α = 0.05), respectively. No statistically significant difference in micro-CT, ISQ, and histological evaluations was observed between implant placement by the two systems (p > 0.05) except implant initial stability. The use of the multi-laser handpiece system is expected to produce the same results as a conventional separate laser-implant handpiece system with the higher implant initial stability. Additionally, it will potentially make the clinical environment more pleasant and will provide convenience for the clinicians.

Background and Objectives: The purpose of this study is to observe the usefulness of autogenous tooth transplantation by examining the cumulative survival rate according to the period of auto-transplanted teeth as pre-implant treatment. Materials and Methods: This study was conducted on 111 patients who visited Kyungpook National University Dental Hospital and underwent autogenous tooth transplantation between November 2008 and January 2021 (about 13 years). The cumulative survival rate of autogenous tooth transplantation according to the causes of extraction of the recipient tooth (caries, periapical lesion, crack, crown fracture, periodontitis) and condition of opposing teeth (natural teeth vs. fixed prosthesis). The cumulative survival rate of autogenous tooth transplantation according to the age (under 30 vs. over 30) was also investigated and it was examined whether there were any differences in each factor. Results: The average follow-up period was 12 months, followed by a maximum of 162 months. The 24-month cumulative survival rate of all auto-transplanted teeth was 91.7%, 83.1% at 60 months and the 162-month cumulative survival rate was 30.1%. There were no statistical differences between the causes of extraction of the recipient’s teeth, differences in the condition of the opposing teeth, and differences under and over the age of 30. Conclusions: The survival rate of autogenous tooth transplantation appears to be influenced by the conditions of the donor tooth rather than the conditions of the recipient tooth. Although autogenous tooth transplantation cannot completely replace implant treatment, it is meaningful in that it can slightly delay or at least earn the time until implant placement is possible.

This study aimed to examine the differences in healing patterns using two types of diode laser devices (laser A and laser B) and a steel scalpel for periodontal surgery through histological and immunohistochemical methods. Twenty 12-week-old male rats were assigned to three groups (3, 7, and 14 days). Square-shaped erosion wounds (2 × 2 mm2 diameter) were created on the hard palate of each rat. Two wounds were created using Laser A and a steel scalpel (Bard-Parker No. 15) on the right palate and using Laser B and a steel scalpel on the left side. Rats were sacrificed after 3, 7, and 14 days. Tissues were collected with a margin of 1 mm from the border of the erosional wound of the maxillary hard palate. Histological and immunohistochemical analyses were performed on the tissue samples after 3, 7, and 14 days. The tissue healing pattern and expression of inducible nitric oxide synthase (iNOS) and cluster of differentiation (CD) were observed under a light microscope. Statistical analysis was conducted using the Kruskal–Wallis H test for comparison among the groups (α = 0.05). In comparison to the wounds made with the scalpel, wounds treated with lasers A and B showed delayed healing patterns. There was no significant difference between the two laser treatment groups (p > 0.05). The expression of iNOS and CD68 was not significantly different among the three groups after 3 and 7 days (p > 0.05). On day 14, the groups treated with the dental diode lasers showed higher expression than the group treated with the steel scalpel, but no significant difference was observed (p > 0.05). Laser-induced wounds tended to heal slower than surgical wounds performed using a steel scalpel, but histological and immunohistochemical results showed no significant difference between the dental diode laser and scalpel groups.

The regeneration of bone defects caused by periodontal disease or trauma is an important goal. Porous hydroxyapatite (HA) is an osteoconductive graft material. However, the hydrophobic properties of HA can be a disadvantage in the initial healing process. HA can be coated with TiO2 to improve its hydrophilicity, and ultraviolet irradiation (UV) can further increase the hydrophilicity by photofunctionalization. This study was designed to evaluate the effect of 5% TiO2-coated HA on rabbit calvarial defects and compare it with that of photofunctionalization on new bone in the early stage. The following four study groups were established, negative control, HA, TiO2-coated HA, and TiO2-coated HA with UV. The animals were sacrificed and the defects were assessed by radiography as well as histologic and histomorphometric analyses. At 2 and 8 weeks postoperatively, the TiO2-coated HA with UV group and TiO2-coated HA group showed significantly higher percentages of new bone than the control group (p < 0.05). UV irradiation increased the extent of new bone formation, and there was a significant difference between the TiO2-coated HA group and TiO2-coated HA with UV group. The combination of TiO2/HA and UV irradiation in bone regeneration appears to induce a favorable response.

Introduction: Prohibitin (PHB) is an essential scaffold protein that modulates signaling pathways controlling cell survival, metabolism, inflammation, and bone formation. However, its specific role in periodontium development remains less understood. This study aims to elucidate the expression pattern and function of PHB in periodontium development and its involvement in alveolar bone formation. Methods: Immunolocalization of PHB in the periodontium of postnatal (PN) mice were examined. Phb morpholino wasmicro-injected into the right-side mandible at PN5, corresponding to the positionwhere the alveolar bone process forms in relation to the lower firstmolar. The micro-injectionwith a scramble control (PF-127) and the left-side mandibles were used as control groups. Five days post-micro-injection, immunohistochemical analysis and micro-CT evaluation were conducted to assess bone mass andmorphological changes. Additionally, expression patterns of signaling molecules were examined following Phb downregulation using 24-h in vitro cultivation of developing dental mesenchyme at E14.5. Results: The immunostaining of PHB showed its localization in the periodontium at PN5, PN8, and PN10. The in vitro cultivation of dental mesenchyme resulted in alterations in Bmps, Runx2, and Wnt signalings after Phb knock-down. At 5 days post-micro-injection, Phb knocking down showed weak immunolocalizations of runt-related transcription factor (RUNX2) and osteocalcin (OCN). However, knocking down Phb led to histological alterations characterized by decreased bone mass and stronger localizations of Ki67 and PERIOSTIN in the periodontium compared 1 to control groups. The micro-CT evaluation showed decreased bone volume and increased PDL space in the Phb knock-down specimens, suggesting its regulatory role in bone formation. Discussion: The region-specific localization of PHB in the margin where alveolar bone forms suggests its involvement in alveolar bone formation and the differentiation of the periodontal ligament. Overall, our findings suggest that Phb plays amodulatory role in alveolar bone formation by harmoniously regulating boneforming-related signaling molecules during periodontium development. [ABSTRACT FROM AUTHOR]

Purpose: One strategy to improve implant osseointegration is to control the quality of the bone reaction at the implant-bone tissue interface using an implant coated with biologically active substances. The purpose of this study was to investigate the effect of a tetra-cell adhesion molecule (T-CAM) coating composed of 4 cell-adhesion molecules-an arginine-glycine-aspartic acid (RGD) sequence, a pro-line-histidine-serine-arginine-asparagine (PHSRN) sequence, a tyrosine-histidine sequence (YH), and a glutamic acid-proline-aspartic acid-isoleucine-methionine (EPDIM)-on the rough-surfaced titanium implant on peri-implant bone formation in the rabbit femur with poor local bone conditions and minimal primary stability. Materials and Methods: Seven T-CAM-coated (blasted/T-CAM) and uncoated (blasted) implants with a rough surface (hydroxyapatite-blasted; Ra = 1.8 μm) were placed in slightly oversized beds of the metaphyses of the right and left femurs of 7 New Zealand White rabbits with light tactile pressure, and minimal primary stability was obtained. To evaluate the effects of T-CAM coating on the peri-implant bone healing response, histomorphometric analysis was performed 8 weeks after surgery. The 2 groups were compared using the Student t test, with a significance level of P < .05. Results: Compared to uncoated blasted implants at 8 weeks of healing, the blasted/T-CAM implants showed a significantly greater amount of bone-implant contact (BIC; P < .01) and new bone formation in the zones 0 to 100 μm and 0 to 500 μm lateral to the implant surface (P < .05) in the medullary space. Conclusion: The T-CAM coating on the rough-surfaced titanium implants significantly enhanced peri-implant bone formation in rabbit femurs with poor local bone condition. [ABSTRACT FROM AUTHOR]

Background: Periodontitis is the most common chronic inflammatory disease caused by complex interaction between the microbial biofilm and host immune responses. In the present study, high-throughput RNA sequencing was utilized to systemically and precisely identify gene expression profiles and alternative splicing. Methods: The pooled RNAs of 10 gingival tissues from both healthy and periodontitis patients were analyzed by deep sequencing followed by computational annotation and quantification of mRNA structures. Results: The differential expression analysis designated 400 up-regulated genes in periodontitis tissues especially in the pathways of defense/immunity protein, receptor, protease, and signaling molecules. The top 10 most upregulated genes were CSF3, MAFA, CR2, GLDC, SAA1, LBP, MME, MMP3, MME-AS1, and SAA4. The 62 down-regulated genes in periodontitis were mainly cytoskeletal and structural proteins. The top 10 most down-regulated genes were SERPINA12, MT4, H19, KRT2, DSC1, PSORS1C2, KRT27, LCE3C, AQ5, and LCE6A. The differential alternative splicing analysis revealed unique transcription variants in periodontitis tissues. The EDB exon was predominantly included in FN1, while exon 2 was mostly skipped in BCL2A1. Conclusions: These findings using RNA sequencing provide novel insights into the pathogenesis mechanism of periodontitis in terms of gene expression and alternative splicing. [ABSTRACT FROM AUTHOR]

Objective The interleukin-17 (IL-17) family is a group of pro-inflammatory cytokines that are produced by a subset of helper T cells. IL-17 family members are not only involved in the immune response of tissues but also play a role in bone metabolism. Although the role of IL-17 in osteoclast-mediated bone resorption has been extensively studied, its role during osteoblast-mediated bone formation has rarely been investigated. In this study, we examined the effect of IL-17 on osteogenesis in rats both in vitro and in vivo. Design To evaluate osteogenesis in vitro, rat calvarial osteoblast precursor cells were cultured for 14 days in osteogenic medium with or without 50ng/mL IL-17. Osteogenic activity was evaluated by alkaline phosphatase and alizarin red staining. The mRNA expression of alkaline phosphatase, osteocalcin, and osterix was also measured by using real-time PCR. To test whether IL-17 affects bone formation in vivo, bone filling was examined by micro-computed tomography and histological observations at 8 weeks after critical-sized defects were made in rat calvaria. Results The presence of IL-17 significantly reduced alkaline phosphatase and alizarin red staining and the expression of alkaline phosphatase, osteocalcin, and osterix in vitro. IL-17 also significantly inhibited the filling of calvarial defects in vivo. Conclusion IL-17 exerted a negative effect on osteogenesis in a rat model. In contrast to the previously reported beneficial effect on osteogenic differentiation of human mesenchymal stem cells, our results suggest a species or cell type-specific role for IL-17 in bone formation. [ABSTRACT FROM AUTHOR]