Search

The piezoelectric actuator is a kind of actuation device that acts through the inverse piezoelectric effect. Due to advantages of high precision, low power consumption, compact size, and flexible structure design, they have a wide range of applications in optics, robotics, microelectromechanical systems, and so on. Piezoelectric materials are the core materials for piezoelectric actuators. In this review, recent developments in high-performance piezoelectric materials (HPMs) are introduced, including relaxor ferroelectric crystals, textured ceramics, piezoelectric metamaterials, and so on. The advances of piezoelectric actuators are introduced in this review based on the developments of those piezoelectric materials, where the relationship between the figure of merits of materials and the performance of actuators is also discussed. Finally, we present outlooks and challenges for piezoelectric materials and actuators. [ABSTRACT FROM AUTHOR]

Perovskite ferroelectrics (PFs) have been the dominant piezoelectric materials for various electromechanical applications, such as ultrasonic transducers, sensors, and actuators, to name a few. In this review article, the development of PF crystals is introduced, focusing on the crystal growth and piezoelectric activity. The critical factors responsible for the high piezoelectric activity of PFs (i.e., phase transition, monoclinic phase, domain size, relaxor component, dopants, and piezoelectric anisotropy) are surveyed and discussed. A general picture of the present understanding on the high piezoelectricity of PFs is described. At the end of this review, potential approaches to further improve the piezoelectricity of PFs are proposed. [ABSTRACT FROM AUTHOR]

• Bending-bending mode piezoelectric actuator with crystal stacks are proposed and evaluated. • Ultrahigh piezoelectric coefficient d 33 of ~10,800 pC/N are achieved in actuation crystal stacks. • Due to high piezoelectricity and bending mode, max velocity is 3.28 mm/s under 130 V pp. • Minimum step resolution of 0.35 µm is demonstrated under 25 V pp driving voltage. [Display omitted] Piezoelectric actuators are important elements for compact actuations with high precision; however, driving voltage reduction is demanding for integration and minimization of precision actuations. In this work, we proposed a bending-bending mode piezoelectric actuator based on multilayered Pb(In 1/2 Nb 1/2)O 3 -Pb(Mg 1/3 Nb 2/3)O 3 -PbTiO 3 (PIN-PMN-PT) single crystals. Ultrahigh apparent piezoelectric coefficient d 33 of ~10,800 pC/N is achieved in four crystal stacks. The crystal stacks are used to fabricate bending-bending mode piezoelectric actuators to reduce driving voltage. Experimental results show that it can produce a maximum traveling velocity of 3.28 mm/s under the driving voltage of 130 V pp at 1000 Hz and minimum step resolution of 0.35 µm with 25 V pp driving voltage. Conventional piezoelectric actuators require driving voltage of ~300 V pp for similar motion velocity. This work demonstrates advantages of crystal stacks in piezoelectric actuators and potential applications in low-voltage precise actuations. [ABSTRACT FROM AUTHOR]

Alternating current (AC) electric field poling (AC-poling) has been actively studied for tailoring the domain configuration of relaxor ferroelectric crystals to further improve their piezoelectric and electro-optical properties. Understanding the change and redistribution of ferroelectric domains under AC electric field is essential for exploring the mechanism of the enhanced piezoelectricity in AC-electric-field-poled (AC-poled) crystals. Despite extensive investigations over recent years, no consensus has yet been reached on this topic. Here, we performed a three-dimensional synchrotron X-ray diffraction study on [001] C -oriented rhombohedral Pb(Mg 1/3 Nb 2/3)O 3 -PbTiO 3 (PMN-PT) ferroelectric crystals to characterize the domain structure variation during the AC-poling process. Our study clearly reveals that the AC electric field has an ability to efficiently merge the ferroelectric domains on both sides of 71o domain walls, leading to a considerable increase of domain size and thus a significant enhancement of electromechanical properties. In addition, this work indicates that, for the AC-poled [001] C -oriented rhombohedral PMN-PT crystal, the most stable state should be the lamellar domain structure with only 109o domain walls and the same volume fractions of the two types of ferroelectric domains on both sides of domain walls, which is expected to benefit the design of high-performance ferroelectric via domain or domain wall engineering. [Display omitted] [ABSTRACT FROM AUTHOR]