Search

The emerging laser writing represents an efficient and promising strategy for covalent two dimensional (2D)-patterning of graphene yet remains a challenging task due to the lack of applicable reagents. Here, we report a versatile approach for covalent laser patterning of graphene using a family of trivalent organic iodine compounds as effective reagents, allowing for the engraving of a library of functionalities onto the graphene surface. The relatively weak iodine-centered bonds within these compounds can readily undergo laser-induced cleavage to in situ generate radicals localized to the irradiated regions for graphene binding, thus completing the covalent 2D-structuring of this 2D-film. The tailor-made attachment of distinct functional moieties with varying electrical properties as well as their thermally reversible binding manner enables programming the surface properties of graphene. With this delicate strategy the bottleneck of a limited scope of functional groups patterned onto the graphene surface upon laser writing is tackled., (© 2024 Wiley‐VCH GmbH.)

Porphyrins are excellent light-harvesting complexes. Presently they are unsuitable for photovoltaic applications, as their excellent light absorbance is compensated to a large extent by their poor transport properties, where most excitons are lost by recombination. Arranging porphyrins in regular, strongly bound, lattices of surface-anchored metal-organic frameworks (PP-SURMOFs) may facilitate charge carrier dissociation, but does not significantly enhance the conductive properties. In most cases, photogenerated excitons traverse undirected, Brownian motion through a hopping process, resulting in a substantial diffusion length to reach electrodes, leading to significant exciton loss through recombination. Here, we propose to guide exciton diffusion indirectly by an external electric field. We show that electric fields, even as strong as 1 V nm -1 , do not affect the HOMO-LUMO gap of the porphyrins. However, fields of 0.1 V nm -1 and even less demonstrate a notable Stark effect, with slight band gap reductions, for some PP-SURMOFs. When applied as an electric field gradient, for instance, via the substrate, it creates a unidirectional hopping pathway for the excitons. Consequently, we expect a significant reduction of exciton diffusion length leading to increased utilization of photogenerated excitons as they reach the electrodes. This strategy holds promise for integrating photoactive molecules in photovoltaic and photocatalytic applications., (© 2024 The Authors. Chemistry - A European Journal published by Wiley-VCH GmbH.)

Two-dimensional van der Waals heterostructures (2D vdWhs) are of significant interest due to their intriguing physical properties critically defined by the constituent monolayers and their interlayer coupling. Synthetic access to 2D vdWhs based on chemically tunable monolayer organic 2D materials remains challenging. Herein, the fabrication of a novel organic-inorganic bilayer vdWh by combining π-conjugated 2D coordination polymer (2DCP, i.e., Cu 3 BHT, BHT = benzenehexathiol) with graphene is reported. Monolayer Cu 3 BHT with detectable µm 2 -scale uniformity and atomic flatness is synthesized using on-water surface chemistry. A combination of diffraction and imaging techniques enables the determination of the crystal structure of monolayer Cu 3 BHT with atomic precision. Leveraging the strong interlayer coupling, Cu 3 BHT-graphene vdWh exhibits highly efficient photoinduced interlayer charge separation with a net electron transfer efficiency of up to 34% from Cu 3 BHT to graphene, superior to those of reported bilayer 2D vdWhs and molecular-graphene vdWhs. This study unveils the potential for developing novel 2DCP-based vdWhs with intriguing physical properties., (© 2024 The Authors. Advanced Materials published by Wiley‐VCH GmbH.)

Introducing continuous mesochannels into covalent organic frameworks (COFs) to increase the accessibility of their inner active sites has remained a major challenge. Here, we report the synthesis of COFs with an ordered bicontinuous mesostructure, via a block copolymer self-assembly-guided nanocasting strategy. Three different mesostructured COFs are synthesized, including two covalent triazine frameworks and one vinylene-linked COF. The new materials are endowed with a hierarchical meso/microporous architecture, in which the mesochannels exhibit an ordered shifted double diamond (SDD) topology. The hierarchically porous structure can enable efficient hole-electron separation and smooth mass transport to the deep internal of the COFs and consequently high accessibility of their active catalytic sites. Benefiting from this hierarchical structure, these COFs exhibit excellent performance in visible-light-driven catalytic NO removal with a high conversion percentage of up to 51.4 %, placing them one of the top reported NO-elimination photocatalysts. This study represents the first case of introducing a bicontinuous structure into COFs, which opens a new avenue for the synthesis of hierarchically porous COFs and for increasing the utilization degree of their internal active sites., (© 2024 Wiley‐VCH GmbH.)

Currently, most reported 2D conjugated metal-organic frameworks (2D c-MOFs) are based on planar polycyclic aromatic hydrocarbons (PAHs) with symmetrical functional groups, limiting the possibility of introducing additional substituents to fine-tune the crystallinity and electrical properties. Herein, a novel class of wavy 2D c-MOFs with highly substituted, core-twisted hexahydroxy-hexa-cata-benzocoronenes (HH-cHBCs) as ligands is reported. By tailoring the substitution of the c-HBC ligands with electron-withdrawing groups (EWGs), such as fluorine, chlorine, and bromine, it is demonstrated that the crystallinity and electrical conductivity at the molecular level can be tuned. The theoretical calculations demonstrate that F-substitution leads to a more reversible coordination bonding between HH-cHBCs and copper metal center, due to smaller atomic size and stronger electron-withdrawing effect. As a result, the achieved F-substituted 2D c-MOF exhibits superior crystallinity, comprising ribbon-like single crystals up to tens of micrometers in length. Moreover, the F-substituted 2D c-MOF displays higher electrical conductivity (two orders of magnitude) and higher charge carrier mobility (almost three times) than the Cl-substituted one. This work provides a new molecular design strategy for the development of wavy 2D c-MOFs and opens a new route for tailoring the coordination reversibility by ligand substitution toward increased crystallinity and superior electric conductivity., (© 2023 The Authors. Small published by Wiley‐VCH GmbH.)

Electron-phonon interactions, crucial in condensed matter, are rarely seen in Metal-Organic Frameworks (MOFs). Detecting these interactions typically involves analyzing luminescence in lanthanide- or actinide-based compounds. Prior studies on Ln- and Ac-based MOFs at high temperatures revealed additional peaks, but these were too faint for thorough analysis. In our research, we fabricated a high-quality, crystalline uranium-based MOF (KIT-U-1) thin film using a layer-by-layer method. Under UV light, this film showed two distinct "hot bands," indicating a strong electron-phonon interaction. At 77 K, these bands were absent, but at 300 K, a new emission band appeared with half the intensity of the main luminescence. Surprisingly, a second hot band emerged above 320 K, deviating from previous findings in rare-earth compounds. We conducted a detailed ab-initio analysis employing time-dependent density functional theory to understand this unusual behaviour and to identify the lattice vibration responsible for the strong electron-phonon coupling. The KIT-U-1 film's hot-band emission was then utilized to create a highly sensitive, single-compound optical thermometer. This underscores the potential of high-quality MOF thin films in exploiting the unique luminescence of lanthanides and actinides for advanced applications., (© 2023 The Authors. Angewandte Chemie International Edition published by Wiley-VCH GmbH.)

Carbonyl aromatic compounds are promising cathode candidates for lithium-ion batteries (LIBs) because of their low weight and absence of cobalt and other metals, but they face constraints of limited redox-potential and low stability compared to traditional inorganic cathode materials. Herein, by means of first-principles calculations, a significant improvement of the electrochemical performance for carbonyl-bridged heterotriangulenes (CBHTs) is reported by introducing pyridinic N in their skeletons. Different center atoms (B, N, and P) and different types of functionalization with nitrogen effectively regulate the redox activity, conductivity, and solubility of CBHTs by influencing their electron affinity, energy levels of frontier orbitals and molecular polarity. By incorporating pyridinic N adjacent to the carbonyl groups, the electrochemical performance of N-functionalized CBHTs is significantly improved. Foremost, the estimated energy density reaches 1524 Wh kg -1 for carbonyl-bridged tri (3,5-pyrimidyl) borane, 50% higher than in the inorganic reference material LiCoO 2 , rendering N-functionalized CBHTs promising organic cathode materials for LIBs. The investigation reveals the underlying structure-performance relationship of conjugated carbonyl compounds and sheds new lights for the rational design of redox-active organic molecules for high-performance lithium ion batteries (LIBs)., (© 2023 The Authors. Advanced Science published by Wiley-VCH GmbH.)

Quasi-2D (q2D) conjugated polymers (CPs) are polymers that consist of linear CP chains assembled through non-covalent interactions to form a layered structure. In this work, the synthesis of a novel crystalline q2D polypyrrole (q2DPPy) film at the air/H 2 SO 4 (95%) interface is reported. The unique interfacial environment facilitates chain extension, prevents disorder, and results in a crystalline, layered assembly of protonated quinoidal chains with a fully extended conformation in its crystalline domains. This unique structure features highly delocalized π-electron systems within the extended chains, which is responsible for the low effective mass and narrow electronic bandgap. Thus, the temperature-dependent charge-transport properties of q2DPPy are investigated using the van der Pauw (vdP) method and terahertz time-domain spectroscopy (THz-TDS). The vdP method reveals that the q2DPPy film exhibits a semiconducting behavior with a thermally activated hopping mechanism in long-range transport between the electrodes. Conversely, THz-TDS reveals a band-like transport, indicating intrinsic charge transport up to a record short-range high THz mobility of ≈107.1 cm 2 V -1 s -1 ., (© 2023 The Authors. Advanced Materials published by Wiley-VCH GmbH.)

Linear conjugated polymers have attracted significant attention in organic electronics in recent decades. However, despite intrachain π-delocalization, interchain hopping is their transport bottleneck. In contrast, two-dimensional (2D) conjugated polymers, as represented by 2D π-conjugated covalent organic frameworks (2D c-COFs), can provide multiple conjugated strands to enhance the delocalization of charge carriers in space. Herein, we demonstrate the first example of thiophene-based 2D poly(arylene vinylene)s (PAVs, 2DPAV-BDT-BT and 2DPAV-BDT-BP, BDT=benzodithiophene, BT=bithiophene, BP=biphenyl) via Knoevenagel polycondensation. Compared with 2DPAV-BDT-BP, the fully thiophene-based 2DPAV-BDT-BT exhibits enhanced planarity and π-delocalization with a small band gap (1.62 eV) and large electronic band dispersion, as revealed by the optical absorption and density functional calculations. Remarkably, temperature-dependent terahertz spectroscopy discloses a unique band-like transport and outstanding room-temperature charge mobility for 2DPAV-BDT-BT (65 cm 2  V -1  s -1 ), which far exceeds that of the linear PAVs, 2DPAV-BDT-BP, and the reported 2D c-COFs in the powder form. This work highlights the great potential of thiophene-based 2D PAVs as candidates for high-performance opto-electronics., (© 2023 The Authors. Angewandte Chemie International Edition published by Wiley-VCH GmbH.)

Flexible porous frameworks are at the forefront of materials research. A unique feature is their ability to open and close their pores in an adaptive manner induced by chemical and physical stimuli. Such enzyme-like selective recognition offers a wide range of functions ranging from gas storage and separation to sensing, actuation, mechanical energy storage and catalysis. However, the factors affecting switchability are poorly understood. In particular, the role of building blocks, as well as secondary factors (crystal size, defects, cooperativity) and the role of host-guest interactions, profit from systematic investigations of an idealized model by advanced analytical techniques and simulations. The review describes an integrated approach targeting the deliberate design of pillared layer metal-organic frameworks as idealized model materials for the analysis of critical factors affecting framework dynamics and summarizes the resulting progress in their understanding and application., (© 2023 The Authors. Angewandte Chemie International Edition published by Wiley-VCH GmbH.)

Two-dimensional conjugated metal-organic frameworks (2D c-MOFs) are emerging as a unique class of electronic materials. However, 2D c-MOFs with band gaps in the Vis-NIR and high charge carrier mobility are rare. Most of the reported conducting 2D c-MOFs are metallic (i.e. gapless), which largely limits their use in logic devices. Herein, we design a phenanthrotriphenylene-based, D 2h -symmetric π-extended ligand (OHPTP), and synthesize the first rhombic 2D c-MOF single crystals (Cu 2 (OHPTP)). The continuous rotation electron diffraction (cRED) analysis unveils the orthorhombic crystal structure at the atomic level with a unique slipped AA stacking. The Cu 2 (OHPTP) is a p-type semiconductor with an indirect band gap of ≈0.50 eV and exhibits high electrical conductivity of 0.10 S cm -1 and high charge carrier mobility of ≈10.0 cm 2  V -1  s -1 . Theoretical calculations underline the predominant role of the out-of-plane charge transport in this semiquinone-based 2D c-MOF., (© 2023 Wiley-VCH GmbH.)

Flavoprotein monooxygenases are a versatile group of enzymes for biocatalytic transformations. Among these, group E monooxygenases (GEMs) catalyze enantioselective epoxidation and sulfoxidation reactions. Here, we describe the crystal structure of an indole monooxygenase from the bacterium Variovorax paradoxus EPS, a GEM designated as VpIndA1. Complex structures with substrates reveal productive binding modes that, in conjunction with force-field calculations and rapid mixing kinetics, reveal the structural basis of substrate and stereoselectivity. Structure-based redesign of the substrate cavity yielded variants with new substrate selectivity (for sulfoxidation of benzyl phenyl sulfide) or with greatly enhanced stereoselectivity (from 35.1 % to 99.8 % ee for production of (1S,2R)-indene oxide). This first determination of the substrate binding mode of GEMs combined with structure-function relationships opens the door for structure-based design of these powerful biocatalysts., (© 2023 The Authors. Angewandte Chemie International Edition published by Wiley-VCH GmbH.)

The chelating ability of quinoxaline cores and the redox activity of organosulfide bridges in layered covalent organic frameworks (COFs) offer dual active sites for reversible lithium (Li)-storage. The designed COFs combining these properties feature disulfide and polysulfide-bridged networks showcasing an intriguing Li-storage mechanism, which can be considered as a lithium-organosulfide (Li-OrS) battery. The experimental-computational elucidation of three quinoxaline COFs containing systematically enhanced sulfur atoms in sulfide bridging demonstrates fast kinetics during Li interactions with the quinoxaline core. Meanwhile, bilateral covalent bonding of sulfide bridges to the quinoxaline core enables a redox-mediated reversible cleavage of the sulfursulfur bond and the formation of covalently anchored lithium-sulfide chains or clusters during Li-interactions, accompanied by a marked reduction of Li-polysulfide (Li-PS) dissolution into the electrolyte, a frequent drawback of lithium-sulfur (Li-S) batteries. The electrochemical behavior of model compounds mimicking the sulfide linkages of the COFs and operando Raman studies on the framework structure unravels the reversibility of the profound Li-ion-organosulfide interactions. Thus, integrating redox-active organic-framework materials with covalently anchored sulfides enables a stable Li-OrS battery mechanism which shows benefits over a typical Li-S battery., (© 2023 The Authors. Advanced Materials published by Wiley-VCH GmbH.)

Vinylene-linked two-dimensional covalent organic frameworks (V-2D-COFs) have shown great promise in electronics and optoelectronics. However, only a few reactions for V-2D-COFs have been developed hitherto. Besides the kinetically low reversibility of C=C bond formation, another underlying issue facing the synthesis of V-2D-COFs is the attainment of high (E)-alkene selectivity to ensure the appropriate symmetry of 2D frameworks. Here, we tailor the E/Z selectivity of the Wittig reaction by employing a proper catalyst (i.e., Cs 2 CO 3 ) to obtain more stable intermediates and elevating the temperature across the reaction barrier. Subsequently, the Wittig reaction is innovatively utilized for the synthesis of four crystalline V-2D-COFs by combining aldehydes and ylides. Importantly, the efficient conjugation and decent crystallinity of the resultant V-2D-COFs are demonstrated by their high charge carrier mobilities over 10 cm 2  V -1  s -1 , as revealed by non-contact terahertz (THz) spectroscopy., (© 2022 The Authors. Angewandte Chemie International Edition published by Wiley-VCH GmbH.)

The β-emitting 99 Tc isotope is a high-yield fission product in 235 U and 239 Pu nuclear reactors, raising special concern in nuclear waste management due to its long half-life and the high mobility of pertechnetate (TcO 4 - ). Under the conditions of deep nuclear waste repositories, Tc is retained through biotic and abiotic reduction of TcO 4 - to compounds like amorphous TcO 2  ⋅ xH 2 O precipitates. It is generally accepted that these precipitates have linear (Tc(μ-O) 2 (H 2 O) 2 ) n chains, with trans H 2 O. Although corresponding Tc-Tc and Tc-O distances have been obtained from extended X-ray absorption fine structure (EXAFS) spectroscopy, this structure is largely based on analogy with other compounds. Here, we combine density-functional theory with EXAFS measurements of fresh and aged samples to show that, instead, TcO 2  ⋅ xH 2 O forms zigzag chains that undergo a slow aging process whereby they combine to form longer chains and, later, a tridimensional structure that might lead to a new TcO 2 polymorph., (© 2022 The Authors. Chemistry - A European Journal published by Wiley-VCH GmbH.)

Single-atom catalysts (SACs), as promising alternatives to Pt-based catalysts, suffer from the limited choice of center metals and low single-atom loading. Here, we report a pentacoordinated Zr-based SAC with nontrivial axial O ligands (denoted O-Zr-N-C) for oxygen reduction reaction (ORR). The O ligand downshifts the d-band center of Zr and confers Zr sites with stable local structure and proper adsorption capability for intermediates. Consequently, the ORR performance of O-Zr-N-C prominently surpasses that of commercial Pt/C, achieving a half-wave potential of 0.91 V vs. reversible hydrogen electrode and outstanding durability (92 % current retention after 130-hour operation). Moreover, the Zr site shows good resistance towards aggregation, enabling the synthesis of Zr-based SAC with high loading (9.1 wt%). With the high-loading catalyst, the zinc-air battery (ZAB) delivers a record-high power density of 324 mW cm -2 among those of SAC-based ZABs., (© 2022 The Authors. Angewandte Chemie International Edition published by Wiley-VCH GmbH.)

PtSe 2 is one of the most promising materials for the next generation of piezoresistive sensors. However, the large-scale synthesis of homogeneous thin films with reproducible electromechanical properties is challenging due to polycrystallinity. It is shown that stacking phases other than the 1T phase become thermodynamically available at elevated temperatures that are common during synthesis. It is shown that these phases can make up a significant fraction in a polycrystalline thin film and discuss methods to characterize them, including their Seebeck coefficients. Lastly, their gauge factors, which vary strongly and heavily impact the performance of a nanoelectromechanical device are estimated., (© 2022 The Authors. Advanced Science published by Wiley-VCH GmbH.)

Exotic oxidation states of the first-row transition metals have recently attracted much interest. In order to investigate the oxidation states of a series of iron-oxalate complexes, an aqueous solution of iron(III) nitrate and oxalic acid was studied by infrared free liquid matrix-assisted laser desorption/ionization as well as ionspray mass spectrometry. Here, we show that iron is not only detected in its common oxidation states +II and +III, but also in its unusual oxidation state +I, detectable in both positive-ion and in negative-ion modes, respectively. Vibrational spectra of the gas phase anionic iron oxalate complexes [Fe III (C 2 O 4 ) 2 ] - , [Fe II (C 2 O 4 )CO 2 ] - , and [Fe I (C 2 O 4 )] - were measured by means of infrared photodissociation spectroscopy and their structures were assigned by comparison to anharmonic vibrational spectra based on second-order perturbation theory., (© 2022 The Authors. Angewandte Chemie International Edition published by Wiley-VCH GmbH.)

The rapid development of on-surface synthesis provides a unique approach toward the formation of carbon-based nanostructures with designed properties. Herein, we present the on-surface formation of CN-substituted phenylene vinylene chains on the Au(111) surface, thermally induced by annealing the substrate stepwise at temperatures between 220 °C and 240 °C. The reaction is investigated by scanning tunneling microscopy and density functional theory. Supported by the calculated reaction pathway, we assign the observed chain formation to a Knoevenagel condensation between an aldehyde and a methylene nitrile substituent., (© 2021 The Authors. Chemistry - A European Journal published by Wiley-VCH GmbH.)

2D conjugated metal-organic frameworks (2D c-MOFs) are emerging as electroactive materials for chemiresistive sensors, but selective sensing with fast response/recovery is a challenge. Phthalocyanine-based Ni 2 [MPc(NH) 8 ] 2D c-MOF films are presented as active layers for polarity-selective chemiresisitors toward water and volatile organic compounds (VOCs). Surface-hydrophobic modification by grafting aliphatic alkyl chains on 2D c-MOF films decreases diffused analytes into the MOF backbone, resulting in a considerably accelerated recovery progress (from ca. 50 to ca. 10 s) during humidity sensing. Toward VOCs, the sensors deliver a polarity-selective response among alcohols but no signal for low-polarity aprotic hydrocarbons. The octadecyltrimethoxysilane-modified Ni 2 [MPc(NH) 8 ] based sensor displays high-performance methanol sensing with fast response (36 s)/recovery (13 s) and a detection limit as low as 10 ppm, surpassing reported room-temperature chemiresistors., (© 2021 The Authors. Angewandte Chemie International Edition published by Wiley-VCH GmbH.)

Two-dimensional polymers (2DPs) are a class of atomically/molecularly thin crystalline organic 2D materials. They are intriguing candidates for the development of unprecedented organic-inorganic 2D van der Waals heterostructures (vdWHs) with exotic physicochemical properties. In this work, we demonstrate the on-water surface synthesis of large-area (cm 2 ), monolayer 2D polyimide (2DPI) with 3.1-nm lattice. Such 2DPI comprises metal-free porphyrin and perylene units linked by imide bonds. We further achieve a scalable synthesis of 2DPI-graphene (2DPI-G) vdWHs via a face-to-face co-assembly of graphene and 2DPI on the water surface. Remarkably, femtosecond transient absorption spectroscopy reveals an ultra-fast interlayer charge transfer (ca. 60 fs) in the resultant 2DPI-G vdWH upon protonation by acid, which is equivalent to that of the fastest reports among inorganic 2D vdWHs. Such large interlayer electronic coupling is ascribed to the interlayer cation-π interaction between 2DP and graphene., (© 2021 The Authors. Angewandte Chemie International Edition published by Wiley-VCH GmbH.)

The potential of metal-organic frameworks (MOFs) for applications in optoelectronics results from a unique combination of interesting photophysical properties and straightforward tunability of organic and inorganic units. Here, it is demonstrated that using MOF approach chromophores can be assembled into well-ordered 1D arrays using metal-oxo strands as lead structure, and the resulting porphyrinic rows exhibit unique photophysical properties and allow the realization of highly sensitive photodetectors. A porphyrinic MOF thin film, In-TCPP surface-coordinated MOF thin films with [021] orientation is fabricated using a layer-by-layer method, from In(NO 3 ) 3 and TCPP (5,10,15,20-(4-carboxyphenyl)porphyrin). Detailed experimental and theoretical analysis reveals that the assembly yields a structure where In-oxo strands running parallel to the substrate fix the chromophoric linkers to yield 1D arrays of porphyrins. The frontier orbitals of this highly anisotropic arrangement are localized in these columnar arrangements of porphyrins and result in high photoactivity, which is exploited to fabricate a photodetector with record (as compared to other organic materials) responsivity in visible regime of 7.28 × 10 14 Jones and short rise/fall times (0.07/0.04 s). This oriented MOF thin film-based high-sensitive photodetector provides a new avenue to use inorganic, stable lead structures to assemble organic semiconductors into regular arrays, thus creating a huge potential for the fabrication of optoelectronic devices., Competing Interests: The authors declare no conflict of interest., (© 2021 The Authors. Advanced Science published by Wiley‐VCH GmbH.)

On the basis of first-principles calculations, the potential of applying 2D honeycomb-kagome polymers made of heteroatom-centered triangulene derivatives to photocatalyze water splitting is explored. The designed 2D polymers possess indirect bandgaps in the range of 1.80-2.84 eV and show pronounced light absorption in the ultraviolet and visible region of the solar spectrum. With suitable band edge alignment, the examined N- and B-center polymers can generate sufficient photon-excited electrons and holes to activate the hydrogen and oxygen evolution reactions, respectively. The combination of lattice-inherent band features (flat bands) with chemical functionalization (potential shift due to heteroatoms) makes it possible to construct tandem cells with suppressed electron/hole recombination for effective overall water splitting. In addition, there is a potential difference between the half-electrodes that can be utlized to power​ auxiliary components in self-sufficient photocatalyzers., (© 2021 The Authors. Advanced Materials published by Wiley-VCH GmbH.)

While the isotope-dependent hydrogen permeability of graphene membranes at ambient condition has been demonstrated, the underlying mechanism has been controversially discussed during the past 5 years. The reported room-temperature proton-over-deuteron (H + -over-D + ) selectivity is 10, much higher than in any competing method. Yet, it has not been understood how protons can penetrate through graphene membranes-proposed hypotheses include atomic defects and local hydrogenation. However, neither can explain both the high permeability and high selectivity of the atomically thin membranes. Here, it is confirmed that ideal graphene is quasi-impermeable to protons, yet the most common defect in sp 2 carbons, the topological Stone-Wales defect, has a calculated penetration barrier below 1 eV and H + -over-D + selectivity of  7 at room temperature and, thus, explains all experimental results on graphene membranes that are available to date. The competing explanation, local hydrogenation, which also reduces the penetration barrier, but shows significantly lower isotope selectivity, is challenged., (© 2020 The Authors. Published by Wiley-VCH GmbH.)

Noble-metal chalcogenides, dichalcogenides, and phosphochalcogenides are an emerging class of two-dimensional materials. Quantum confinement (number of layers) and defect engineering enables their properties to be tuned over a broad range, including metal-to-semiconductor transitions, magnetic ordering, and topological surface states. They possess various polytypes, often of similar formation energy, which can be accessed by selective synthesis approaches. They excel in mechanical, optical, and chemical sensing applications, and feature long-term air and moisture stability. In this Minireview, we summarize the recent progress in the field of noble-metal chalcogenides and phosphochalcogenides and highlight the structural complexity and its impact on applications., (© 2020 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Despite the recent progress in the synthesis of crystalline boronate ester covalent organic frameworks (BECOFs) in powder and thin-film through solvothermal method and on-solid-surface synthesis, respectively, their applications in electronics, remain less explored due to the challenges in thin-film processability and device integration associated with the control of film thickness, layer orientation, stability and crystallinity. Moreover, although the crystalline domain sizes of the powder samples can reach micrometer scale (up to ≈1.5 μm), the reported thin-film samples have so far rather small crystalline domains up to 100 nm. Here we demonstrate a general and efficient synthesis of crystalline two-dimensional (2D) BECOF films composed of porphyrin macrocycles and phenyl or naphthyl linkers (named as 2D BECOF-PP or 2D BECOF-PN) by employing a surfactant-monolayer-assisted interfacial synthesis (SMAIS) on the water surface. The achieved 2D BECOF-PP is featured as free-standing thin film with large single-crystalline domains up to ≈60 μm 2 and tunable thickness from 6 to 16 nm. A hybrid memory device composed of 2D BECOF-PP film on silicon nanowire-based field-effect transistor is demonstrated as a bio-inspired system to mimic neuronal synapses, displaying a learning-erasing-forgetting memory process., (© 2020 The Authors. Published by Wiley-VCH Verlag GmbH & Co. KGaA.)

Single-layer and multi-layer 2D polyimine films have been achieved through interfacial synthesis methods. However, it remains a great challenge to achieve the maximum degree of crystallinity in the 2D polyimines, which largely limits the long-range transport properties. Here we employ a surfactant-monolayer-assisted interfacial synthesis (SMAIS) method for the successful preparation of porphyrin and triazine containing polyimine-based 2D polymer (PI-2DP) films with square and hexagonal lattices, respectively. The synthetic PI-2DP films are featured with polycrystalline multilayers with tunable thickness from 6 to 200 nm and large crystalline domains (100-150 nm in size). Intrigued by high crystallinity and the presence of electroactive porphyrin moieties, the optoelectronic properties of PI-2DP are investigated by time-resolved terahertz spectroscopy. Typically, the porphyrin-based PI-2DP 1 film exhibits a p-type semiconductor behavior with a band gap of 1.38 eV and hole mobility as high as 0.01 cm 2  V -1  s -1 , superior to the previously reported polyimine based materials., (© 2020 The Authors. Published by Wiley-VCH Verlag GmbH & Co. KGaA.)

Covalent organic frameworks (COFs) allow elaborate manufacture of ordered one-dimensional channels in the crystal. We defined a superlattice of COFs by engineering channels with a persistent triangular shape and discrete pore size. We observed a size-recognition regime that is different from the characteristic adsorption of COFs, whereby pore windows and walls were cooperative so that triangular apertures sorted molecules of one-atom difference and notch nanogrooves confined them into single-file molecular chains. The recognition and confinement were accurately described by sensitive spectroscopy and femtosecond dynamic simulations. The resulting COFs enabled instantaneous separation of mixtures at ambient temperature and pressure. This study offers an approach to merge precise recognition, selective transport, and instant separation in synthetic 1D channels., (© 2019 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Recent experiments have demonstrated transport and separation of hydrogen isotopes through the van der Waals gap in hexagonal boron nitride and molybdenum disulfide bulk layered materials. However, the experiments cannot distinguish if the transported particles are protons (H + ) or protium (H) atoms. Here, reported are the theoretical studies, which indicate that protium atoms, rather than protons, are transported through the gap. First-principles calculations combined with well-tempered metadynamics simulations at finite temperature reveal that for h-BN and MoS 2 , the diffusion mechanism of both protons and protium (H) atoms involves a hopping process between adjacent layers. This process is assisted by low-energy phonon shear modes. The extracted diffusion coefficient of protium matches the experiment, while for protons it is several orders of magnitude smaller. This indicates that protium atoms are responsible for the experimental observations. These results allow for a comprehensive interpretation of experimental results on the transport of hydrogen isotopes through van der Waals gaps and can help identify other materials for hydrogen isotope separation applications., (© 2019 The Authors. Published by WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

In organic photovoltaics, porphyrins (PPs) are among the most promising compounds owing to their large absorption cross-section, wide spectral range, and stability. Nevertheless, a precise adjustment of absorption band positions to reach a full coverage of the so-called green gap has not been achieved yet. We demonstrate that a tuning of the PP Q- and Soret bands can be carried out by using a computational approach for which substitution patterns are optimized in silico. The most promising candidate structures were then synthesized. The experimental UV/Vis data for the solvated compounds were in excellent agreement with the theoretical predictions. By attaching further functionalities, which allow the use of PP chromophores as linkers for the assembly of metal-organic frameworks (MOFs), we were able to exploit packing effects resulting in pronounced redshifts, which allowed further optimization of the photophysical properties of PP assemblies. Finally, we use a layer-by-layer method to assemble the PP linkers into surface-mounted MOFs (SURMOFs), thus obtaining high optical quality, homogeneous and crystalline multilayer films. Experimental results are in full accord with the calculations, demonstrating the huge potential of computational screening methods in tailoring MOF and SURMOF photophysical properties., (© 2019 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

A two-dimensional (2D) sp 2 -carbon-linked conjugated polymer framework (2D CCP-HATN) has a nitrogen-doped skeleton, a periodical dual-pore structure and high chemical stability. The polymer backbone consists of hexaazatrinaphthalene (HATN) and cyanovinylene units linked entirely by carbon-carbon double bonds. Profiting from the shape-persistent framework of 2D CCP-HATN integrated with the electrochemical redox-active HATN and the robust sp 2 carbon-carbon linkage, 2D CCP-HATN hybridized with carbon nanotubes shows a high capacity of 116 mA h g -1 , with high utilization of its redox-active sites and superb cycling stability (91 % after 1000 cycles) and rate capability (82 %, 1.0 A g -1 vs. 0.1 A g -1 ) as an organic cathode material for lithium-ion batteries., (© 2019 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

2D crystals, single sheets of layered materials, often show distinct properties desired for optoelectronic applications, such as larger and direct band gaps, valley- and spin-orbit effects. Being atomically thin, the low amount of material is a bottleneck in photophysical and photochemical applications. Here, the formation of stacks of 2D crystals intercalated with small surfactant molecules is proposed. It is shown, using first principles calculations, that the very short surfactant methyl amine electronically decouples the layers. The indirect-direct band gap transition characteristic for Group 6 transition metal dichalcogenides is demonstrated experimentally by observing the emergence of a strong photoluminescence signal for ethoxide-intercalated WSe 2 and MoSe 2 multilayered nanoparticles with lateral size of about 10 nm and beyond. The proposed hybrid materials offer the highest possible density of the 2D crystals with electronic properties typical of monolayers. Variation of the surfactant's chemical potential allows fine-tuning of electronic properties and potentially elimination of trap states caused by defects., (© 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

A rapid and scalable synthesis of six new imine-linked highly porous and crystalline COFs is presented that feature exceptionally high chemical stability in harsh environments including conc. H 2 SO 4 (18 m), conc. HCl (12 m), and NaOH (9 m). This is because of the presence of strong interlayer C-H⋅⋅⋅N hydrogen bonding among the individual layers, which provides significant steric hindrance and a hydrophobic environment around the imine (-C=N-) bonds, thus preventing their hydrolysis in such an abrasive environment. These COFs were further converted into porous, crystalline, self-standing, and crack-free COF membranes (COFMs) with extremely high chemical stability for their potential applications for sulfuric acid recovery. The as-synthesized COFMs exhibit unprecedented permeance for acetonitrile (280 Lm -2  h -1  bar -1 ) and acetone (260 Lm -2  h -1  bar -1 )., (© 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

On grounds of first principles calculations we propose two-dimensional semiconductors, ultrathin mono-, bi- and trilayers of PdPX (X=S, Se), as photocatalysts with band gaps suitable for harvesting the visible part of the solar spectrum and band edge energies matching the electrochemical potentials required for water splitting reaction. Layered bulk palladium phosphochalcogenides, among them the title compounds, have been known since 1971. The cleavage energy of ≈0.6 J m -2 suggests that single and few layer PdPX can be produced by exfoliation from the bulk phase. PdPX monolayer possesses a moderate band gap of 2.12 (1.97) eV for PdPS (PdPSe) and shows high, albeit anisotropic, carrier motilities. Bandgap (and edge) engineering is possible by applying strain (in the range of 1.5∼2.3 eV), and by varying the number of layers, that is, to 1.95(1.80) eV for the bi- and 1.75 (1.62) eV for the trilayer, to 1.70 (1.43) eV in the bulk., (© 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

In all known Group 5 transition-metal dichalcogenide monolayers (MLs), the metal centers carry a spin, and their ground-state phases are either metallic or semiconducting with indirect band gaps. Here, on grounds of first-principles calculations, we report that the Haeckelite polytypes 1S-NbX 2 (X=S, Se, Te) are diamagnetic direct-band-gap semiconductors even though the Nb atoms are in the 4+ oxidation state. In contrast, 1S-VX 2 MLs are antiferromagnetically coupled indirect-band-gap semiconductors. The 1S phases are thermodynamically and dynamically stable but of slightly higher energy than their 1H and 1T ML counterparts. 1S-NbX 2 MLs are excellent candidates for optoelectronic applications owing to their small band gaps (between 0.5 and 1 eV). Moreover, 1S-NbS 2 shows a particularly high hole mobility of 2.68×10 3  cm 2  V -1  s -1 , which is significantly higher than that of MoS 2 and comparable to that of WSe 2 ., (© 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Covalent organic frameworks (COFs) have emerged as a tailor-made platform for designing layered two-dimensional polymers. However, most of them are obtained as neutral porous materials. Here, we report the construction of ionic crystalline porous COFs with positively charged walls that enable the creation of well aligned yet spatially confined ionic interface. The unconventional reversed AA-stacking mode alternately orientates the cationic centers to both sides of the walls; the ionic interface endows COFs with unusual electrostatic functions. Because all of the walls are decorated with electric dipoles, the uptake of CO 2 is enhanced by three fold compared to the neutral analog. By virtue of sufficient open space between cations, the ionic interface exhibits exceptional accessibility, efficiency, and selectivity in ion exchange to trap anionic pollutants. These findings suggest that construction of the ionic interface of COFs offers a new way to structural and functional designs., (© 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

A macrocyclic ligand (H 2 L) containing two o,o'-bis(iminomethyl)phenol and two calix[4]arene head units has been synthesized and its coordination chemistry towards divalent Ni and Zn investigated. The new macrocycle forms complexes of composition [ML] (M=Zn, M=Ni) and [ZnL(py) 2 ], which were characterized by elemental analysis; IR, UV/Vis, and NMR spectroscopy; electrospray ionization mass spectrometry (ESI-MS); and X-ray crystallography (for [ZnL(py) 2 ] and [NiL]). H 2 L allows the sensitive optical detection of Zn 2+ among a series of biologically relevant metal ions by a dual fluorescence enhancement/quenching effect in solution. The fluorescence intensity of the macrocycle increases by a factor of ten in the presence of Zn 2+ with a detection limit in the lower nanomolar region., (© 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

We use cryogenic ion vibrational spectroscopy to characterize the structure and fluxionality of the magic number boron cluster B 13 + . The infrared photodissociation (IRPD) spectrum of the D 2 -tagged all- 11 B isotopologue of B 13 + is reported in the spectral range from 435 to 1790 cm -1 and unambiguously assigned to a planar boron double wheel structure based on a comparison to simulated IR spectra of low energy isomers from density-functional-theory (DFT) computations. Born-Oppenheimer DFT molecular dynamics simulations show that B 13 + exhibits internal quasi-rotation already at 100 K. Vibrational spectra derived from these simulations allow extracting the first spectroscopic evidence from the IRPD spectrum for the exceptional fluxionality of B 13 + ., (© 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

The most stable form of a B 36 cluster has a central hexagonal hole. Such an interesting finding has led to the possible synthesis of a 2D boron sheet by employing the B 36 cluster as the building unit. Herein, a DFT study to investigate the reason for the central location of the hexagonal hole in the B 36 cluster is presented. The results show that the B 36 cluster with a central hexagonal hole is highly thermodynamically and kinetically stable. More importantly, such high stability is further understood through chemical bonding analysis., (© 2016 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

We have studied the magnetic properties of the SURMOF-2 series of metal-organic frameworks (MOFs). Contrary to bulk MOF-2 crystals, where Cu(2+) ions form paddlewheels and are antiferromagnetically coupled, in this case the Cu(2+) ions are connected via carboxylate groups in a zipper-like fashion. This unusual coupling of the spin 1/2 ions within the resulting one-dimensional chains is found to stabilize a low-temperature, ferromagnetic (FM) phase. In contrast to other ordered 1D systems, no strong magnetic fields are needed to induce the ferromagnetism. The magnetic coupling constants describing the interaction between the individual metal ions have been determined in SQUID experiments. They are fully consistent with the results of ab initio DFT electronic structure calculations. The theoretical results allow the unusual magnetic behavior of this exotic, yet easy-to-fabricate, material to be described in a detailed fashion., (© 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Two new chemically stable triazine- and phenyl-core-based crystalline porous polymers (CPPs) have been synthesized using a single-step template-free solvothermal route. Unique morphological diversities were observed for these CPPs [2,3-DhaTta (ribbon) and 2,3-DhaTab (hollow sphere)] by simply altering the linker planarity. A detailed time-dependent study established a significant correlation between the molecular level structures of building blocks with the morphology of CPPs. Moreover, a DFT study was done for calculating the interlayer stacking energy, which revealed that the extent of stacking efficiency is responsible for governing the morphological diversity in these CPPs., (© 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

The first examples of dimeric, di-Pt(II) -containing heteropolytungstates are reported. The two isomeric di-platinum(II)-containing 22-tungsto-2-phosphates [anti-Pt(II)2(α-PW11O39)2](10-) (1 a) and [syn-Pt(II)2(α-PW11O39)2](10-) (2 a) were synthesized in aqueous pH 3.5 medium using one-pot procedures. Polyanions 1 a and 2 a contain a core comprising two face-on PtO4 units, with a Pt⋅⋅⋅Pt distance of 2.9-3 Å. Both polyanions were investigated by single-crystal XRD, IR, TGA, UV/Vis, (31) P NMR, ESI-MS, CID-MS/MS, electrochemistry, and DFT. On the basis of DFT and electrochemistry, we demonstrated that the {Pt2(II)} moiety in 1 a and 2 a can undergo fully reversible two-electron oxidation to {Pt2(III)}, accompanied by formation of a single Pt-Pt bond. Hence we have discovered the novel subclass of Pt(III)-containing heteropolytungstates., (© 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

A single-material logical junction with negligible contact resistance is designed by exploiting quantum-confinement effects in 1T PdS2 . The metallic bilayer serves as electrodes for the semiconducting channel monolayer, avoiding contact resistance. Heat dissipation is then governed by tunnel loss, which becomes negligible at channel lengths larger than 2.45 nm. This value marks the integration limit for a conventional 2D transistor., (© 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

For inorganic semiconductors crystalline order leads to a band structure which gives rise to drastic differences to the disordered material. An example is the presence of an indirect band gap. For organic semiconductors such effects are typically not considered, since the bands are normally flat, and the band-gap therefore is direct. Herein we show results from electronic structure calculations demonstrating that ordered arrays of porphyrins reveal a small dispersion of occupied and unoccupied bands leading to the formation of a small indirect band gap. We demonstrate herein that such ordered structures can be fabricated by liquid-phase epitaxy and that the corresponding crystalline organic semiconductors exhibit superior photophysical properties, including large charge-carrier mobility and an unusually large charge-carrier generation efficiency. We have fabricated a prototype organic photovoltaic device based on this novel material exhibiting a remarkable efficiency., (© 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Transition-metal chalcogenide (TMC) nanoflakes of composition MX2 (where M=Ti, Zr and Hf; X=S and Se) crystallize preferentially in equilateral hexagons and exhibit a pronounced lateral quantum confinement. The hexagonal shape of octahedral (1T) TMC nanoflakes is the result of charge localization at the edges/vertices and the resulting Coulomb repulsion. Independent of their size, all nanoflakes have the Mn X2n-2 stoichiometry and thus an unoxidized metal center which results in dopant states. These states become relevant for small nanoflakes and lead to metallic character, but for larger nanoflakes (>6 nm) the 2D monolayer properties dominate. Finally, coordination of Lewis bases at the nanoflake edges has no significant effect on the electronic structure of these species confirming the viability of colloidal synthetic approaches., (© 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

The first fully inorganic, discrete gold-palladium-oxo complex [NaAu(III) 4 Pd(II) 8 O8 (AsO4 )8 ](11-) has been synthesized in aqueous medium. The combination of single-crystal XRD, elemental analysis, mass spectrometry, and DFT calculations allowed establishing the structure and composition of the novel polyanion, and UV/Vis studies suggest that it is stable in neutral aqueous media., (© 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

The structure and electronic structure of layered noble-transition-metal dichalcogenides MX2 (M=Pt and Pd, and chalcogenides X=S, Se, and Te) have been investigated by periodic density functional theory (DFT) calculations. The MS2 monolayers are indirect band-gap semiconductors whereas the MSe2 and MTe2 analogues show significantly smaller band gap and can even become semimetallic or metallic materials. Under mechanical strain these MX2 materials become quasi-direct band-gap semiconductors. The mechanical-deformation and electron-transport properties of these materials indicate their potential application in flexible nanoelectronics., (© 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

We report herein a comprehensive theoretical study of the thermodynamics and kinetics of molecular hydrogen activation by frustrated Lewis pairs (FLPs). A series of intermolecularly combined boranes (Lewis acids) and phosphines (Lewis bases), with experimentally established different reactivities towards H2, have been subjected to DFT and (SCS-)MP2 calculations, and analyzed in terms of their structural properties, the energetics of association of the FLPs, and the kinetics of their interactions with H2 and hydrogenation to the ion-pair products. The analysis included the following steps: 1) assessment of the ability/inability of the Lewis species to preorganize into FLPs with an optimum arrangement of the acid and base sites for preconditioning the reaction with H2 , 2) comprehension of the different thermodynamics of hydrogenation of the selected FLPs by comparing the Gibbs energies of the overall reactions, and 3) estimation of the mechanism of the activation of H2 by identifying the reaction steps and the associated kinetic barriers. The results of our studies correlate well with experimental findings and have clarified the reasons for the observed different reactivities of the investigated systems, ranging from reversible or nonreversible activation to no reaction with H2. The derived predictions could assist the future design of Lewis acid-base systems with desired properties and applicability as metal-free hydrogenation catalysts., (Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)