Search

Macroscale superlubricity on engineering steel surfaces offers a promising solution for minimizing friction and wear in engineering applications. However, achieving superlubricity typically requires a long running‐in period, which may result in significant wear for the friction pair. Herein, a new lubricant with superlubricating properties is rationally designed by using polyethylene glycol (PEG) and critic acid (CA) under complexing effect with a running‐in period of about 800 s. Importantly, the introduction of carbon quantum dots (CQDs) obtained from the pyrolysis of CA into PEG aqueous solution shortens the running‐in period for achieving macroscale superlubricity (µ ≈ 0.005) between steel/steel contact to 44 s. The corresponding wear rate (1.15 × 10−7 mm3 N−1 m−1) on the steel disk is reduced by 77% due to the shorter running‐in time. Furthermore, the surface analysis combined with the molecular dynamics simulations demonstrates that CQDs easily adsorb on the surface of the friction pair, forming a carbon film that reduces interaction energy between the lubricant molecules and the substrate. This work provides new insights into the lubrication mechanism of CQDs and contributes to the design of liquid superlubricants with short running‐in periods and low wear rates on engineering steel surfaces. [ABSTRACT FROM AUTHOR]

Thick diamond‐like carbon (DLC) coatings with different silicon (Si) transition layer thickness are deposited by hollow cathode plasma immersion coating technology. The results show that the internal stress of the coating can be tuned by changing the deposition time of Si transition layer, thereby obtaining good adhesion strength. Friction and wear results show that all coatings have good tribological properties. The coating with 8 min Si transition layer (Si‐8) demonstrates the lowest friction coefficient (μ ≈ 0.03), even achieves ultralow friction (μ ≈ 0.008) for a short time. However, the wear rate of Si‐8 coating is found to be the largest (2.1 × 10−16 m3 (N m)−1. The low friction coefficient of Si‐8 coating is related to its high degree of graphitization, complete transfer film and fine wear debris. In contrast, the Si‐16 coating has the lowest wear rate of about 5.6 × 10−17 m3 (N m)−1 with a relatively high friction coefficient (μ ≈ 0.1). This is due to its high hardness and the formation of a nano‐twisted double helix carbon debris during the friction process. This nano‐twisted double helix structure can consume additional plastic deformation energy, while reducing the interface contact area and increasing the interface bearing capacity, thereby improving the wear resistance of the thick DLC coating. [ABSTRACT FROM AUTHOR]