Search

The structure of UDP-galactopyranose mutase, the enzyme responsible for the conversion of UDP-galactopyranose to UDP-galactofuranose, has been solved. The structure solution required the use of two crystal forms and a selenomethionine variant. Crystal form P21 was used to collect a complete MAD data set, a native data set and a single-wavelength non-isomorphous selenomethionine data set. A starting set of MAD phases was then improved by non-crystallographic averaging and cross-crystal averaging of all P21 data. The initial maps were of such low quality that transformation matrices between cells could not be determined. It was therefore assumed that although there were large changes in unit-cell parameters, the molecule occupied the same position in each cell. This starting assumption was allowed to refine during the averaging procedure and did so satisfactorily. Despite a visible increase in the quality of the map allowing some secondary-structural elements to be located, the overall structure could not be traced and refined. The rediscovery of the second crystal form, P212121, allowed the collection of a native data set to 2.4 Å. Molecular placement of electron density was used to determine the relationship between the two unit cells. In this study, only the already averaged P21 experimental density could be placed in the P212121 map. Less extensively density-modified maps did not give a clear solution. The study suggests even poor non-isomorphous data can be used to significantly improve map quality. The relationship between P21 and P212121 could then be used in a final round of cross-crystal averaging to generate phases. The resulting map was easily traced and the structure has been refined. The structure sheds important light on a novel mechanism and is also a therapeutic target in the treatment of tuberculosis. [ABSTRACT FROM AUTHOR]

The removal of chemically damaged DNA bases such as 3-methyladenine (3-MeA) is an essential process in all living organisms and is catalyzed by the enzyme 3-MeA DNA glycosylase I. A key question is how the enzyme selectively recognizes the alkylated 3-MeA over the much more abundant adenine. The crystal structures of native and Y16F-mutant 3-MeA DNA glycosylase I from Staphylococcus aureus in complex with 3-MeA are reported to 1.8 and 2.2 Å resolution, respectively. Isothermal titration calorimetry shows that protonation of 3-MeA decreases its binding affinity, confirming previous fluorescence studies that show that charge-charge recognition is not critical for the selection of 3-MeA over adenine. It is hypothesized that the hydrogen-bonding pattern of Glu38 and Tyr16 of 3-MeA DNA glycosylase I with a particular tautomer unique to 3-MeA contributes to recognition and selection.

The techniques used in protein production and structural biology have been developing rapidly, but techniques for recording the laboratory information produced have not kept pace. One approach is the development of laboratory information-management systems (LIMS), which typically use a relational database schema to model and store results from a laboratory workflow. The underlying philosophy and implementation of the Protein Information Management System (PiMS), a LIMS development specifically targeted at the flexible and unpredictable workflows of protein-production research laboratories of all scales, is described. PiMS is a web-based Java application that uses either Postgres or Oracle as the underlying relational database-management system. PiMS is available under a free licence to all academic laboratories either for local installation or for use as a managed service.

The Boredetella pertussis wlbD gene product is a putative uridine-5-diphosphate N-acetylglucosamine (UDP-GlcNAc) 2'-epimerase involved in Band A lipopolysaccharide biosynthesis. The wlbD gene is homologous to Escherichia coli rffE (32% identical), an established UDP-GlcNAc 2'-epimerase that is involved in enterobacterial common antigen (ECA) formation. The structure of the rffE protein reveals an unexpected role for a bound sodium ion in orientating a substrate-binding alpha-helix in the enzyme active site. Whilst key active-site residues in rffE are present in the wlbD sequence, the sodium-binding residues outside the active site are absent. This raises questions about the modulation of enzyme activity in these two enzymes. The wlbD gene from B. pertussis has been cloned and overexpressed in E. coli and the resulting protein has been purified to homogeneity. In the current study, crystals of the mutant Gln339Arg wlbD enzyme have been obtained by sitting-drop vapour diffusion. Uncomplexed Gln339Arg and UDP-GlcNAc complex data sets have been collected in-house on a rotating-anode generator to 2.1 A. Combined, the data sets identify the space group as P2(1)2(1)2(1), with unit-cell parameters a = 78, b = 91, c = 125 A, alpha = beta = gamma = 90 degrees. The asymmetric unit contains two monomers and 53% solvent.

Single-stranded DNA-binding proteins are recruited when single-stranded DNA is exposed by disruption of the duplex. Many important biological processes such as DNA replication can only occur when the two strands of the duplex are separated. A defining trait of these proteins is the presence of the so-called OB fold. The single-stranded DNA-binding protein of the crenarchaeote Sulfolobus solfataricus has a number of interesting differences and similarities to both the eubacterial and eukaryotic homologues. It has an extended C-terminal tail with significant sequence identity to a similar region in the eubacterial protein. However, the sequence of the OB fold is much more like the eukaryotic and euryarchaeal proteins. The S. solfataricus protein remains a monomer in the absence of DNA but rapidly polymerizes upon binding - a behaviour not seen in the Escherichia coli protein. The protein has been overexpressed, purified and crystallized. The protein crystallizes in two related forms, both having space group P6(1) (or P6(5)) with approximate unit-cell parameters a = b = 75, c = 69 A, but the crystals are distinguished by their size and morphology. The larger crystals are hexagonal bipyramids and are merohedrally twinned, diffracting to 1.34 A with diffraction observed to 1.2 A. Smaller needle-like crystals diffract to about 2.0 A but are not twinned. Molecular-replacement attempts have failed owing to low identity with available search models. The structure will be determined by multiple-wavelength methods.

3-Methylaspartase (E.C. 4.3.1.2) catalyses the reversible anti elimination of ammonia from L-threo-(2S,3S)-3-methylaspartic acid to give mesaconic acid as well as a slower syn elimination from the (2S,3R)-epimer, L-erythro-3-methylaspartic acid. The anti-elimination reaction occurs in the second step of the catabolic pathway for glutamic acid in Clostridium tetanomorphum. The reverse reaction is of particular interest because the addition of ammonia to substituted fumaric acids is highly stereoselective and gives highly functionalized amino acids. The mechanism of the transformation is unusual and of considerable interest. 3-Methylaspartase from C. tetanomorphum has been overexpressed and purified from Escherichia coli. Crystals of the enzyme have been obtained by sitting-drop vapour diffusion. Two native data sets have been collected, one in-house on a rotating-anode generator to 3.2 A and one at the European Synchrotron Radiation Facility to 2.0 A. A 2.1 A data set has been collected on a crystal of selenomethionine protein. Combining the data sets identify the space group as P2(1)2(1)2, with unit-cell parameters a = 110.3, b = 109.9, c = 67.2 A, alpha = beta = gamma = 90 degrees. The asymmetric unit contains two monomers with 42% solvent. A self-rotation function indicates the presence of a twofold axis, consistent with a biological dimer.

Glucose-1-phosphate thymidylyltransferase (RmlA; E.C. 2.7.7.24) is the first of four enzymes involved in the biosynthesis of dTDP-L-rhamnose, the precursor of L-rhamnose, a key component of the cell wall of many pathogenic bacteria. RmlA catalyses the condensation of thymidine triphosphate (dTTP) and alpha-D-glucose-1-phosphate (G1P), yielding dTDP-D-glucose. RmlA from Pseudomonas aeruginosa has been overexpressed and purified. Crystals of the enzyme have been grown using the sitting-drop vapour-diffusion technique with PEG 6000 and lithium sulfate as precipitant. Several diffraction data sets of single frozen crystals were collected to a resolution of 1.66 A. Crystals belonged to space group P1, with unit-cell parameters a = 71.5, b = 73.1, c = 134.7 A, alpha = 89.9, beta = 80.9, gamma = 81.1 degrees. The asymmetric unit contains eight monomers in the form of two RmlA tetramers with a solvent content of 51%. Selenomethionine-labelled protein has been obtained and crystallized.

dTDP-D-glucose 4,6-dehydratase (RmlB) is the second of four enzymes involved in the dTDP-L-rhamnose pathway and catalyzes the dehydration of dTDP-D-glucose to dTDP-4-keto-6-deoxy-D-glucose. The ultimate product of the pathway, dTDP-L-rhamnose, is the precursor of L-rhamnose, which is a key component of the cell wall of many pathogenic bacteria. RmlB from Salmonella enterica serovar Typhimurium has been overexpressed and purified, and crystals of the enzyme have been grown using the sitting-drop vapour-diffusion technique with lithium sulfate as precipitant. Diffraction data have been obtained to a resolution of 2.8 A on a single frozen RmlB crystal which belongs to space group P2(1), with unit-cell parameters a = 111.85, b = 87.77, c = 145.66 A, beta = 131.53 degrees. The asymmetric unit contains four monomers in the form of two RmlB dimers with a solvent content of 62%. A molecular-replacement solution has been obtained and the model is currently being refined.

L-Rhamnose is an essential component of the cell wall of many pathogenic bacteria. Its precursor, dTDP-L-rhamnose, is synthesized from alpha-D-glucose-1-phosphate and dTTP via a pathway requiring four distinct enzymes: RmlA, RmlB, RmlC and RmlD. RmlD catalyses the terminal step of this pathway by converting dTDP-6-deoxy-L-lyxo-4-hexulose to dTDP-L-rhamnose. RmlD from -Salmonella enterica serovar Typhimurium has been overexpressed in Escherichia coli. The recombinant protein was purified by a two--step protocol involving anion-exchange and hydrophobic chromatography. Dynamic light-scattering experiments indicated that the recombinant protein is monodisperse. Crystals of native and selenomethionine-enriched RmlD have been obtained using the sitting-drop vapour-diffusion method with polyethylene glycol as precipitant. Diffraction data have been collected from orthorhombic crystals of both native and selenomethionyl-derivatized protein, allowing tracing of the protein structure.

2-Keto-3-deoxy-6-phosphogluconate aldolase (KDPG aldolase, E.C. 4.1. 2.14) is a member of the pyruvate/phosphoenolpyruvate aldolase family. It is also a synthetically useful enzyme, capable of catalyzing the stereoselective aldol addition of pyruvate to a range of unnatural electrophilic substrates. The recombinant protein was purified by a two-step HPLC protocol involving anion-exchange and hydrophobic chromatography. Dynamic light-scattering experiments indicated the protein to be monodisperse. Crystals were obtained using the sitting-drop vapour-diffusion method, with PEG 6K as precipitant. Diffraction data were collected on a frozen crystal to a resolution of 2.26 A on station PX9.6 at the Daresbury synchrotron. The crystal belongs to space group P2(1)2(1)2(1), with unit-cell parameters a = 53.2, b = 77.9, c = 146.8 A.

L-Rhamnose is an essential component of the cell wall of many pathogenic bacteria. Its precusor, dTDP-L-rhamnose, is synthesized from alpha-D-glucose-1-phosphate and dTTP via a pathway requiring four distinct enzymes: RmlA, RmlB, RmlC and RmlD. RmlC was overexpressed in Escherichia coli. The recombinant protein was purified by a two-step protocol involving anion-exchange and hydrophobic chromatography. Dynamic light-scattering experiments indicated that the recombinant protein is monodisperse. Crystals were obtained using the sitting-drop vapour-diffusion method with ammonium sulfate as precipitant. Diffraction data were collected on a frozen crystal to a resolution of 2.17 A. The crystal belongs to either space group P3121 or P3221, with unit-cell parameters a = b = 71.56, c = 183.53 A and alpha = beta = 90, gamma = 120 degrees.

UDP-galactopyranose mutase, the enzyme responsible for the conversion of UDP-galactopyranose to UDP-galactofuranose, has been crystallized in a form suitable for X-ray diffraction studies. UDP-galactofuranose is a key component of mycobacterial cell walls. Crystals of both the native protein and a selenomethionine variant have been grown by the vapour-diffusion method in hanging drops, and diffract to beyond 3.0 A using synchrotron radiation. Equilibration was against a solution of 20%(w/v) polyethylene glycol (4K), 12%(v/v) 2--propanol, 0.1 M HEPES pH 7.6 at 293.5 K. Crystals grow as thin plates of dimensions 0.4 x 0.2 x approximately 0.02 mm. They are monoclinic [corrected], space group P21, with unit-cell dimensions a = 71. 12, b = 58.42, c = 96.38 A, beta = 96.38 degrees. 92% (native) and 94% (selenomethionine) complete data sets have been recorded to 2.9 A (Rmerge = 5.0%) and 3.0 A (Rmerge = 6.9%), respectively. The Matthews coefficient is 2.35 A3 Da-1 for a dimer in the asymmetric unit, the solvent content being 47%. Diffraction data have also been recorded on a putative platinum derivative to 3.5 A.

A small grid of conditions has been developed for co-crystallization of the plant lectin concanavalin A (conA) and polysaccharides. Crystals have been obtained of complexes of conA with alpha1-2 mannobiose, 1-methyl alpha1-2 mannobiose, fructose, a trisaccharide and a pentasaccharide. The crystals diffract to resolutions of 1. 75-2.7 A using a copper rotating-anode source. The crystals are grown in the presence of polyethylene glycol 6K [10-20%(w/v)] at around pH 6.0. Optimization for each particular carbohydrate requires small adjustments in the conditions; however, all complexes give some crystalline precipitate in this limited grid. The alpha1-2 mannobiose complex crystals diffract to 1.75 A with space group I222 and cell dimensions a = 91.7, b = 86.8, c = 66.6 A. One monomer is present in the asymmetric unit. The 1-methyl alpha1-2 mannobioside complex crystallizes in space group P212121, cell dimensions a = 119. 7, b = 119.7, c = 68.9 A and diffract to 2.75 A. One tetramer is present in the asymmetric unit. Two crystal forms of the conA-fructose complex have been obtained. The first has space group P212121, cell dimensions a = 121.7, b = 119.9, c = 67.3 A with a tetramer in the asymmetric unit and diffracts to 2.6 A. The second crystallizes in space group C2221, cell dimensions a = 103.3, b = 117.9, c = 254.3 A with two dimers in the asymmetric unit and diffracts to 2.42 A. Structures and crystallization of the trisaccharide-conA and pentasaccharide-conA complexes have already been reported. In all complexes, the protein is found as a tetramer, although varying combinations of non-crystallographic and crystallographic symmetry are involved in generating the tetramer. The precise packing of the tetramer varies from crystal to crystal and it is likely that this variability facilitates crystallization.

Crystals have been obtained of succinylated concanavalin A complexed to a novel bidentate synthetic ligand. The crystals are the first example of a lectin with a synthetic multivalent ligand and the first report of crystallization of succinylated concanavalin A. The crystals were obtained by sitting-drop vapour diffusion equilibrating with a solution of 20% polyethylene glycol, pH 5, 293. 5 K. Crystals are orthorhombic, belonging to space group C2221 with unit-cell dimensions of a = 99.1, b = 127.4, c = 118.9 A. The asymmetric unit contains a dimer, with over 65% of the volume occupied by water. The ligand cross links concanavalin A monomers. Succinylated concanavalin A is known to be a dimer in solution, yet it is found as the typical concanavalin A tetramer in the crystal. The contacts holding together the tetramer appear extensive and suggest that a fine balance between dimer and tetramers exists. Data to 2.65 A have been collected and the structure determined by the molecular replacement method.

The three-dimensional structure of ubiquitin-conjugating enzyme 9 (Ubc9) has been obtained to a resolution of 2.8 A by molecular replacement followed by a combination of automated refinement and graphical intervention. Diffraction data were recorded on a single crystal in space group P43 with cell dimensions a = b = 73.9, c = 42. 9 A. The final model has an R factor of 21.3% for all data to 2.8 A. Only the N-terminal methionine, a two-residue N-terminal extension and a four-residue loop are not located by the final electron-density map. Ubc9 is now known to be the first sumo, a new ubiquitin-like protein, conjugating enzyme and does not conjugate ubiquitin. The structure of Ubc9 shows important differences compared with the structures of known ubiquitin-conjugating enzymes. At the N-terminal helix, the structural and sequence alignments are out of register by one amino acid giving Ubc9 a different recognition surface compared to ubiquitin-conjugating enzymes. This is coupled to a profound change in the electrostatic surface of the molecular face remote from the catalytic site. These differences may be important in recognition of other proteins in the Sumo conjugation pathway. The catalytic cysteine in Ubc9 has a positively charged lip and a negatively charged ridge nearby. Both these features seem confined to sumo-conjugating enzymes, and a sequence alignment of sumo and ubiquitin suggests how these might play a role in sumo/ubiquitin discrimination.

The three-dimensional structure of the complex between methyl alpha-D-mannopyranoside and concanavalin A has been refined at 2.0 A resolution. Diffraction data were recorded from a single crystal (space group P2(1)2(1)2(1), a = 123.7, b = 128.6, c = 67.2 A) using synchrotron radiation at a wavelength of 1.488 A. The final model has good geometry and an R factor of 19.9% for 58 871 reflections (82% complete), within the resolution limits of 8 to 2 A, with F > 1.0sigma(F). The asymmetric unit contains four protein subunits arranged as a dimer of dimers with approximate 222 point symmetry. Each monomer binds one saccharide molecule. Each sugar is bound to the protein by hydrogen bonds and van der Waals contacts. Although the four subunits are not crystallographically equivalent, the protein-saccharide interactions are nearly identical in each of the four binding sites. The differences that do occur between the four sites are in the structure of the water network which surrounds each saccharide; these networks are involved in crystal packing. The structure of the complex is compared with a refined saccharide-free concanavalin A structure. The saccharide-free structure is composed of crystallographically identical subunits, again assembled as a dimer of dimers, but with exact 222 symmetry. In the saccharide complex the tetramer association is different in that the monomers tend to separate resulting in fewer intersubunit interactions. The average temperature factor of the mannoside complex is considerably higher than that of the saccharide-free protein. The binding site in the saccharide-free structure is occupied by three ordered water molecules and the side chain of Asp71 from a neighbouring molecule in the crystal. These occupy positions similar to those of the four saccharide hydroxyls which are hydrogen bonded to the site. Superposition of the saccharide-binding site from each structure shows that the major changes on binding involve expulsion of these ordered solvents and the reorientation of the side chain of Tyrl00. Overall the surface accessibility of the saccharide decreases from 370 to 100 A(2) when it binds to the protein. This work builds upon the earlier studies of Derewenda et al. [Derewenda, Yariv, Helliwell, Kalb (Gilboa), Dodson, Papiz, Wan & Campbell (1989). EMBO J. 8, 2198-2193] at 2.9 A resolution, which was the first detailed study of lectin-saccharide interactions.