Search

N‐Heterocyclic carbenes (NHCs) have drawn considerable interest in the field of nanomaterials chemistry as highly stabilizing ligands enabling the formation of strong and covalent carbon–metal bonds. Applied to gold nanoparticles synthesis, the most common strategy consists of the reduction of a preformed NHC‐AuI complex with a large excess of a reducing agent that makes the particle size difficult to control. In this paper, we report the straightforward synthesis of NHC‐coated gold nanoparticles (NHC‐AuNPs) by treating a commercially available gold(I) precursor with an easy‐to‐synthesize NHC‐BH3 reagent. The latter acts as both the reducing agent and the source of surface ligands operating under mild conditions. Mechanistic studies including NMR spectroscopy and mass spectrometry demonstrate that the reduction of gold(I) generates NHC‐BH2Cl as a by‐product. This strategy gives efficient control over the nucleation and growth of gold particles by varying the NHC‐borane/gold(I) ratio, allowing unparalleled particle size variation over the range of 4.9±0.9 to 10.0±2.7 nm. Our strategy also allows an unprecedented precise and controlled seeded growth of gold nanoparticles. In addition, the as‐prepared NHC‐AuNPs exhibit narrow size distributions without the need for extensive purification or size‐selectivity techniques, and are stable over months. [ABSTRACT FROM AUTHOR]

X‐ray photoelectron spectroscopy analysis was applied to investigate the thermal stability under ultra‐high vacuum environment of the surface oxide film formed by electrochemical passivation of a newly designed Cr15Fe10Co5Ni60Mo10 (at.%) multi‐principal element alloy and providing the alloy superior localized corrosion resistance compared to conventional stainless steels and alloys. A spectral decomposition methodology involving the subtraction of Auger peaks overlapping the Fe 2p and Co 2p core level regions was applied for quantification of the oxide film composition and thickness. The results show that, at 100°C, the passive oxide film is mainly dehydrated and dehydroxylated. Obvious loss of Ni hydroxide and conversion of Mo (VI) to Mo (IV) species are observed at 200°C, with further reduction of Mo species to Mo (III) observed at 300°C. In this temperature range, the total cation quantity in the oxide film remains stable despite the compositional alteration. At 400°C, Cr (III) oxide forms at the expense of Fe and Mo oxides, resulting in an oxide film essentially consisting of chromium oxide. At 500°C, Cr (III) oxide is eliminated, making the passive film unstable at this temperature. Possible Cr oxide removal mechanisms are discussed. [ABSTRACT FROM AUTHOR]

Electroreduction of CO2 to CO is one of the simplest ways to valorise CO2 as a source of carbon. Herein, a cheap, robust, Cu‐based hybrid catalyst consisting of a polymer of Cu phthalocyanine coated on carbon nanotubes, which proved to be selective for CO production (80 % faradaic yield) at relatively low overpotentials, was developed. Polymerisation of Cu phthalocyanine was shown to have a drastic effect on the selectivity of the reaction because molecular Cu phthalocyanine was instead selective for proton reduction under the same conditions. Although the material only showed isolated Cu sites in phthalocyanine‐like CuN4 coordination, in situ and operando X‐ray absorption spectroscopy showed that, under operating conditions, the Cu atoms were fully converted to Cu nanoparticles, which were likely the catalytically active species. Interestingly, this restructuring of the metal sites was reversible. [ABSTRACT FROM AUTHOR]

N‐Heterocyclic carbene (NHC)‐stabilized copper nanoparticles (NPs) were synthesized from an NHC–borane adduct and mesitylcopper(I) under thermal conditions (refluxing toluene for 2.5 h). NPs with a size distribution of 11.6±1.8 nm were obtained. The interaction between Cu NPs and NHC ligands was probed by X‐ray photoelectron spectroscopy, which showed covalent binding of the NHC to the surface of the NPs. Mechanistic studies suggested that NHC–borane plays two roles: contributing to the reduction of [CuMes]2 to release Cu0 species and providing NHC ligands to stabilize the copper NPs. [ABSTRACT FROM AUTHOR]

Atomic layer deposited (ALD) 50 nm Al xTa yO z mixture coatings are grown on steel for corrosion protection. In morphological and compositional analyses the coatings are found to be uniform, conformal, well-adhered, and low in defect density. Corrosion protection properties are evaluated with polarization measurements and neutral salt spray (NSS) testing. The sealing properties of the mixtures improve with increasing aluminum oxide content, whereas the protection durability improves with increasing tantalum oxide content. In comparison to single-layer and nano-laminate ALD Al2O3 and Ta2O5 coatings, all mixtures are found to have better protective properties. [ABSTRACT FROM AUTHOR]

The initial stages of growth of ordered layers of Al[sub 2]O[sub 3] on NiAl(001) single-crystal surfaces at 1025 K and 10[sup -7] mbar (10[sup -5]Pa) in O[sub 2] have been studied using scanning tunneling microscopy (STM) and scanning tunneling spectroscopy (STS). The STM results evidence the formation of elongated strips (26 Å wide and 11 Å high) of Al[sub 2]O[sub 3] oriented along the [100] and [010] directions of the substrate. With longer oxidation, the substrate is increasingly covered by rectangular and striped islands resulting from the vicinal and parallel growth of the strips. On the ultrathin oxide film formed after 500 L (1 L = 10[sup -6] torr-s (∼1.33 × 10[sup -4] Pa·s)) of exposure, STM atomic resolution images have been obtained for the first time. They evidence the [001] orientation of the oxygen sublattice in Bain epitaxy on the substrate. The observation of one-dimensional atomic trenches together with the strips observed on the nanometer scale is consistent with the growth of θ-Al[sub 2]O[sub 3]. The STS local measurements evidence the insulating behavior of the oxide layer formed with a gap value ranging from 7 and 8 eV for amorphous and ordered domains, respectively. [ABSTRACT FROM AUTHOR]