Search

Vigilant animals detect and respond to threats in the environment, often changing posture and movement patterns. Vigilance is modulated not only by predators but also by conspecific threats. In social animals, precisely how conspecific threats alter vigilance behavior over time is relevant to long‐standing hypotheses about social plasticity. We report persistent effects of a simulated conspecific challenge on behavior of wild northern paper wasp foundresses, Polistes fuscatus. During the founding phase of the colony cycle, conspecific wasps can usurp nests from the resident foundress, representing a severe threat. We used automated tracking to monitor the movement and posture of P. fuscatus foundresses in response to simulated intrusions. Wasps displayed increased movement, greater bilateral wing extension, and reduced antennal separation after the threat was removed. These changes were not observed after presentation with a wooden dowel. By rapidly adjusting individual behavior after fending off an intruder, paper wasp foundresses might invest in surveillance of potential threats, even when such threats are no longer immediately present. The prolonged vigilance‐like behavioral state observed here is relevant to plasticity of social recognition processes in paper wasps. [ABSTRACT FROM AUTHOR]

The rise of fentanyl and fentanyl analogs in the drug supply pose serious threats to public health. Much of these compounds enter the United States through shipping routes. Here we provide a method for fentanyl screening and analysis that utilizes pressure‐sensitive adhesive (PSA) lined paper to recover drug residues from parcel‐related surfaces. The paper used is commercially available repositionable notes (also called post‐it or sticky notes). From this paper, mass spectra were obtained by paper spray‐mass spectrometry (PS‐MS), where PSA paper served as both a sampling and analysis substrate. Seven fentanyl‐related compounds were analyzed: fentanyl, 4‐anilino‐N‐phenethylpiperidine (4‐ANPP), N,1‐diphenethyl‐N‐phenylpiperidin‐4‐amine (phenethyl‐4‐ANPP), valerylfentanyl, 4‐fluoroisobutyrylfentanyl (4‐FIBF), carfentanil, and p‐fluorofentanyl. These compounds were recovered by PSA paper and identified by PS‐MS from packaging tape and plastic at 50 ng and from cardboard and shipping labels at 100 ng. The impact of cutting agents on PS‐MS analysis of fentanyl analogs was explored. No trends of analyte suppression were found at high concentrations of the cutting agents caffeine, diphenhydramine, and lidocaine when recovered from surfaces. A cartridge that required no precise cutting of PSA paper prior to sampling or analysis was evaluated for use in PS‐MS for fentanyl screening. Recovery and detection of fentanyl from plastic sheeting was demonstrated with this cut‐free cartridge. The cut‐free cartridge showed somewhat less consistency and lower analyte signal than the standard cartridge, but performance was suitable for potential screening applications. In combining PSA surface sampling with PS‐MS for drug screening, both sampling and detection of fentanyl‐related compounds is simple, rapid, and low‐cost. [ABSTRACT FROM AUTHOR]

The value of large‐scale collaborations for solving complex problems is widely recognized, but many barriers hinder meaningful authorship for all on the resulting multi‐author publications. Because many professional benefits arise from authorship, much of the literature on this topic has focused on cheating, conflict and effort documentation. However, approaches specifically recognizing and creatively overcoming barriers to meaningful authorship have received little attention.We have developed an inclusive authorship approach arising from 15 years of experience coordinating the publication of over 100 papers arising from a long‐term, international collaboration of hundreds of scientists.This method of sharing a paper initially as a storyboard with clear expectations, assignments and deadlines fosters communication and creates unambiguous opportunities for all authors to contribute intellectually. By documenting contributions through this multi‐step process, this approach ensures meaningful engagement by each author listed on a publication.The perception that co‐authors on large authorship publications have not meaningfully contributed underlies widespread institutional bias against multi‐authored papers, disincentivizing large collaborations despite their widely recognized value for advancing knowledge. Our approach identifies and overcomes key barriers to meaningful contributions, protecting the value of authorship even on massively multi‐authored publications. [ABSTRACT FROM AUTHOR]

Rational interphase reaction provides a feasible method to overcome the matters of insufficient adsorption of CO2 molecules at the catalytic sites and competitive hydrogen evolution reaction (HER), which can increase the formation rate and selectivity of carbon derivatives in photocatalytic CO2 reduction. Herein, a hydrophobic photocatalyst with TiO2 nanosheet arrays grown on hydrophobic carbon paper (TiO2‐HCP) is fabricated using a combination of magnetron sputtering and hydrothermal method, and its unique structure not only endows it excellent light absorption and effective carrier spatial separation but also avoids the hydrophobic reagent covering reactive sites. When the interphase reaction shifts from solid–liquid diphase to gas‐liquid‐solid tri‐phase, the photocatalytic CO2 reduction over TiO2‐HCP mainly generates CO molecules and effectively suppresses HER due to the HCP suppressing the mass transfer of H2O molecules to active sites. Notably, amounts of H2 byproduct can further react with CO2/CO to produce high value‐added CH4 resultant by modifying the N‐doped TiO2‐HCP with nickel/nickel oxide species. In the tri‐phase interfacial CO2 photoreduction system, the CH4 formation rate of Ni@N‐doped TiO2‐HCP reaches 134.17 µmol m−2 h−1 (about 74.6% selectivity) and total carbon derivatives selectivity is about 93%. [ABSTRACT FROM AUTHOR]

Flexible gas sensors made of polyaniline (PANI)‐reduced graphene oxide (rGO) nanocomposite were prepared using three different substrates, namely filter paper, cotton fabric, and weighing paper, through in‐situ reduction of GO and in‐situ polymerization of aniline. Preliminary analysis showed that the PANI/rGO coated on filter paper possesses a superior electrical conductance than PANI/rGO coated on cotton fabric and weighing paper. Such observation was attributed to the good attachment of the PANI/rGO nanocomposites onto the high‐density mesh‐like structure of the filter paper with rough surfaces. In contrast, PANI/rGO coated onto weighing paper and cotton fabric of different surface structures presented lower‐to‐almost negligible conductance. Accordingly, PANI/rGO filter paper was selected for the subsequent evaluation of gas sensing properties. The gas‐sensing performances of the PANI/rGO filter paper sensors indicated that the 5 wt% PANI/rGO (i.e., 5 wt% rGO) sample exhibited the best response of 306% for 500 ppm carbon dioxide (CO2) gas at room temperature with a recovery rate of 41.5%. On the other hand, the optimum recovery rate of 59.5% was identified at 0.5 wt% PANI/rGO sample which exhibited a response of 155%. Owing to the synergy effect, the PANI/rGO sensor outperformed the sensor made of pure PANI or pure rGO. [ABSTRACT FROM AUTHOR]

Background: Chlorpyrifos is a commonly used organophosphorus pesticide in agriculture. However, its neurotoxicity poses a huge threat to human health. In the present study, a chitosan‐modified filter paper‐based surface enhanced Raman scattering active substrate (Ch/AgNPs/paper) was fabricated and used to detect trace amounts of chlorpyrifos in 120 treated wheat samples. Results: Results showed that the Ch/AgNPs/paper substrate could be used to enhance the chlorpyrifos spectral fingerprint only up to a concentration of 0.000558 mg L−1. Following Raman spectra acquisition, three pre‐processing methods, including Savitzky–Golay (Savitsky–Golay filter with a second order polynomial) smoothing with first derivative and second derivative and normalization, were used to reduce baseline variation and increase resolutions of spectral peak features of the original spectra dataset. Then, prediction models based on partial least squares were established for detecting chlorpyrifos pesticide residue in wheat. The partial least squares model with normalization yielded optimal result, with a correlation coefficient of 0.9764, root mean square error of prediction of 1.22 mg L−1 in the prediction, and relative analysis deviation of 4.12. Five unknown samples were prepared to verify the accuracy of the prediction model. The predicted recoveries were calculated to be between 97.25% and 119.38% with an absolute t value of 0.598. The value of a t‐test shows that the prediction model is accurate and reliable. Conclusion: The present study demonstrates that the proposed method can achieve rapid detection of chlorpyrifos in wheat. © 2022 Society of Chemical Industry. [ABSTRACT FROM AUTHOR]

Soft robotics driven by origami can fundamentally advance robotic functionalities by significantly improving continuum, compliance, and configurability. Here, a new field is proposed, "paper robotics," which is based on moisture‐responsive self‐folding of paper substrates into functional 3D machines using origami‐inspired techniques. By properly designing a hydrophobic wax layer and a hygro‐expandable hydrophilic layer, printed bilayer paper will fold automatically into desired shapes through anisotropic swelling that occurs when water is sprayed on the structure. The bilayer actuators can be readily fabricated on paper by the asymmetrical penetration of wax that is printed on both sides of the paper. The patterned paper automatically folds when water is added and unfolds as the water evaporates. The structure can perform various mechanical functions, including gripping and biomimetic locomotion. One of the practical applications, a kirigami paper robotic finger as an electrical switch, is also demonstrated. The functional mechanism based on the swelling and shrinking properties of paper is modeled and critical parameters for the design of the bilayer actuation are thoroughly characterized. This work will be a starting point for paper robotics and open new avenues to merge soft robotics and origami techniques. [ABSTRACT FROM AUTHOR]

Sense‐making, sensemaking, and sense making are terms used in different disciplines. Similarities of usage seem unclear. (1) to examine the concepts used in different approaches to sense‐making/sensemaking/sense making; (2) to identify, classify and synthesize recent studies relevant to information science, as well as similar group on sensemaking in education research; (3) to reflect on future directions for sense‐making/sensemaking methodology in information science. The objectives were to retrieve, examine, classify and perform meta‐synthesis on sense‐making/sensemaking studies in both information science and education research. The review used systematic review principles, with selection criteria for case studies for examination in both information science and education sets. The final meta‐synthesis used a meta‐ethnographic approach, together with findings of recent overviews on organizational sensemaking, and other information science reviews. Qualitative sense‐making studies in information science often used Dervin's SMM (sense‐making methodology) and studies in organizations and education frequently used Weick's organizational sensemaking. Different mixed methods approaches were identified. Sense‐making is actively used in research and practice in information science and knowledge management. Using a coherent sense‐making methodology helps and dialogic principles are useful in planning, data collection and analysis. Individual and collective sense‐making are important to information science. [ABSTRACT FROM AUTHOR]

The development of low‐cost and efficient electrolyzer components is crucial for practical electrochemical carbon dioxide reduction (ECR). In this study, facile non‐woven cellulose‐based porous transport layers (PTLs) were developed for high current density CO2‐to‐CO conversion. By depositing a cobalt phthalocyanine (CoPc) catalyst‐layer over the PTLs, we fabricated ECR‐functioning gas‐diffusion‐electrodes (GDEs) for both flow‐cell and zero‐gap electrolyzers. Under optimal conditions, the Faradaic efficiency of CO (FECO) reached 92 % at a high current density of 200 mA cm−2. Furthering the architecture of the GDEs, CoPc was incorporated into the initial PTL slurry, forming ECR‐active PTLs without the need for an additional catalyst‐layer. The new GDE‐architecture favored the CoPc‐distribution by enhancing the contact and interactions with the carbon substrate and demonstrated a stable electrolysis process for over 50 h in a zero‐gap cell at 200 mA cm−2 with a FECO of 80 %. [ABSTRACT FROM AUTHOR]

Transplantation surgery continues to evolve and improve through advancements in transplant technique and technology. With the increased availability of ultrasound machines as well as the continued development of Enhanced Recovery after Surgery (ERAS) protocols, regional anesthesia has become an essential component of providing analgesia and minimizing opioid use perioperatively. Many centers currently utilize peripheral and neuraxial blocks during transplantation surgery, but these techniques are far from standardized practices. The utilization of these procedures is often dependent on transplantation centers' historical methods and perioperative cultures. To date, no formal guidelines or recommendations exist which address the use of regional anesthesia in transplantation surgery. In response, the Society for the Advancement of Transplant Anesthesia (SATA) identified experts in both transplantation surgery and regional anesthesia to review available literature concerning these topics. The goal of this task force was to provide an overview of these publications to help guide transplantation anesthesiologists in utilizing regional anesthesia. The literature search encompassed most transplantation surgeries currently performed and the multitude of associated regional anesthetic techniques. Outcomes analyzed included analgesic effectiveness of the blocks, reduction in other analgesic modalities—particularly opioid use, improvement in patient hemodynamics, as well as associated complications. The findings summarized in this systemic review support the use of regional anesthesia for postoperative pain control after transplantation surgeries. Part 1 of the manuscript focused on regional anesthesia performed in thoracic transplantation surgeries, and part 2 in abdominal transplantations. Specifically, regional anesthesia in liver, kidney, pancreas, intestinal, and uterus transplants or applicable surgeries are discussed. [ABSTRACT FROM AUTHOR]

Over the past years, eosinophils have become a focus of scientific interest, especially in the context of their recently uncovered functions (e.g. antiviral, anti‐inflammatory, regulatory). These versatile cells display both beneficial and detrimental activities under various physiological and pathological conditions. Eosinophils are involved in the pathogenesis of many diseases which can be classified into primary (clonal) and secondary (reactive) disorders and idiopathic (hyper)eosinophilic syndromes. Depending on the biological specimen, the eosinophil count in different body compartments may serve as a biomarker reflecting the underlying pathophysiology and/or activity of distinct diseases and as a therapy‐driving (predictive) and monitoring tool. Personalized selection of an appropriate therapeutic strategy directly or indirectly targeting the increased number and/or activity of eosinophils should be based on the understanding of eosinophil homeostasis including their interactions with other immune and non‐immune cells within different body compartments. Hence, restoring as well as maintaining homeostasis within an individual's eosinophil pool is a goal of both specific and non‐specific eosinophil‐targeting therapies. Despite the overall favourable safety profile of the currently available anti‐eosinophil biologics, the effect of eosinophil depletion should be monitored from the perspective of possible unwanted consequences. [ABSTRACT FROM AUTHOR]

Conventional Al‐air batteries are not suitable as portable power devices due to their complicated water management and bulky system. To resolve this issue, the fiber paper‐ and cotton cloth‐based Al‐air batteries were proposed, which exploited the capillary force from the paper (FP) and cotton cloth (CC) to deliver the solutions and eliminated the external pump. The physical features of the FP and CC were gained including the surface morphologies, surface elementary analysis, liquid absorption and flow rates. CC owned larger liquid absorption and faster flow rate due to its hierarchically woven‐spun fiber structure, compared to the randomly oriented fibers of the FP, although the surface of the CC demonstrated lower O/C ratio than that of the FP. So, the performance of the CC‐based Al‐air battery was largely higher than that of the FP‐based battery. The performance of the CC‐based Al‐air battery was optimal at 1.0 M NaOH electrolyte and the anode‐to‐cathode surface area ratio of 1 : 4, with the peak power density of 14.95±0.28 mW cm−2, and the maximum current density of 36.61±0.54 mA cm−2. To apply the CC‐based Al‐air battery, the two‐battery pack connected in series was assembled to drive a timer and light 9 LEDs. [ABSTRACT FROM AUTHOR]

This is the author's second bibliography on process capability indices (PCIs) and contains approximately 1080 journal papers and books for the period 2010–2021. The related literature is classified into six major categories, namely, books, review/overview papers, theory‐ and method‐related papers, special applications, software packages, and papers omitted in the author's previous bibliography. Theory‐ and method‐related papers are further classified into univariate, multivariate, and functional PCI‐related papers. Special applications include acceptance sampling, control charts, supplier selection, and tolerance design and other optimizations. The present bibliography consists of two parts. Part I contains books, review/overview papers, and univariate PCI‐related papers, while Part II includes multivariate and functional PCI‐related papers, special applications, software packages, and papers omitted in the author's previous bibliography. [ABSTRACT FROM AUTHOR]

This is the second part of the bibliography on process capability indices (PCIs) for the period 2010–2021, and includes multivariate and functional PCI‐related papers, special applications, software packages, and papers omitted in the author's previous bibliography. [ABSTRACT FROM AUTHOR]

Background: The HABS‐HD study is an epidemiological study of aging in diverse populations and began transitioning from entirely paper‐based charting to electronic data capture (EDC) in 2018. As the study evolved, the team realized that neuropsychological testing, scoring, and quality review consumed many resources and much staff time. This abstract aims to describe how the HABS‐HD study moved from paper‐based capture of neuropsychological data to EDC with a small data team. Method: The HABS‐HD staff recognized the time commitment for scoring and reviewing scores for the neuropsychological assessment, which created a delay between a participant completing the study and the research diagnosis. Senior research assistants worked with internal developers to create an EDC for the neuropsychological assessment. The data core is small and consists of a director, an assistant director, two developers, two data entry personnel, and a clinician. Specific components were completed on paper to prevent an increase in equipment cost and maintain methodological consistency. These components were reviewed post‐assessment, and a senior research assistant directly entered the scores into the EDC. Result: The EDC neuropsychological assessment was tested before going live. The team adapted data capture from the older method into the EDC. The new system allows the research director to obtain statistics of individual testers and provide more training as needed. It also permits more senior personnel to review the paper components and enter them directly into the EDC, which improves throughput. Conclusion: Smaller data core teams can transition larger projects from paper methods to EDC. The change does not need to be entirely paper or electronic, but investigators should evaluate which methodologies function best for their populations. Finally, communication between the personnel capturing the data, reviewing the quality of the capture, and writing the EDC software is essential. [ABSTRACT FROM AUTHOR]

We tested the use of nasal swabs spotted onto filter paper (Whatman 3M) for the molecular diagnosis of SARS‐CoV‐2 infection. Spots of a positive nasal swab in conservation medium (B.1.177 strain, 21Ct) were still positive (duo E‐gene/IP4) after 10, 20, and 30 days of conservation at room temperature, with Ct values of 28, 27, and 26, respectively. Direct spotting of the swab at bedside (omicron strain) still gave a positive result after 10 days in two RT‐qPCR systems: 33.7 Ct using duo E‐gene/IP4, and 34.8 using a specific Omicron system. Spotting of a dilution range of media spiked with the Delta (strain 2021/FR/0610, lineage B 1.617.2) and Omicron strains (strain UVE/SARS‐CoV‐2/2021/FR/1514) showed a threshold of 0.04 TCID50 after 10 days of conservation. We show, for the first time, that this simple and low‐cost conservation method can be used to store samples for RT‐qPCR against SARS‐CoV‐2 for up to at least 1 month. [ABSTRACT FROM AUTHOR]

Herein, a membraneless paper based co‐laminar microfluidic Hydrazine‐Hydrogen peroxide fuel cell, employing graphite pencil electrode, is presented. Hydrogen peroxide has been used as oxidant while sulphuric acid and sodium hydroxide have been employed as electrolytes. The electrodes were formed by manual stroking of graphite pencils. Maximum power output was achieved by examining various combinations of different grades of graphite electrodes on a suitable filter paper with 100 pencil strokes. Here, maximum current density and power density of 14.43 μA/cm2 and 1.30 μW/cm2 respectively were achieved at a stable open circuit potential of 410 mV for 40 mM of hydrazine concentration. [ABSTRACT FROM AUTHOR]

The 18th International Convention of the East Asian Economic Association (EAEA) will be held on B 21-22, October 2023 in Seoul National University (SNU), Seoul, Korea. b The theme of the Convention is: B "Charting Inclusive Pathways for Innovation, Growth and Integration in Asia." b The Program Committee Chaired by Professor Keun Lee of SNU is now issuing a call for papers related to the Convention theme and for papers on a wide range of economic issues. IMPORTANT DATES Abstract submission open: 21, October 2022 Abstract submission due: 15, April 2023 Session proposal deadline: 30, April 2023 Notification of abstract acceptance: 15 May 2023 Full paper submission due: 31 August 2023 Paper presenter registration due: 31 August 2023 Convention dates: 21-22 October 2023. [Extracted from the article]

There is an urgent need for energy sources with lower environmental impacts to dispose of waste generated by human activities. In this context, a holistic analysis of energy use of waste from agricultural and forestry activities, animal excreta, urban solid waste and sewage, waste from the pulp and paper industry and charcoal in Brazil is presented. Based on a bibliographic review, the current Brazilian panorama is presented in figures giving, a vision of national potential for harnessing bioenergy from this theoretical and technical potential. The QGIS3.24.2 Tisler geoprocessing tool was used to generate potentiality maps from census data of microregions and municipalities available in the IBGE database (2022) and in the Geocentric Reference System for the Americas (SIRGAS 2000). The results of map analysis by micro‐regions of the primary energy from agricultural residues highlight sugar cane, corn and soybeans crops, followed by wastewater and animal excreta. They stood out amont the studied sources of biomass with technical potentials of 53.17, 15.23 and 6.81 GW, respectively. With these results, it is concluded that Brazil could enable around 75 GW installed power, reusing all biomass, potentially 12.5 PJ, without considering the 16 GW already installed from sugarcane and paper black liquor plants. [ABSTRACT FROM AUTHOR]

Ecologists have worked to ascribe function to the variation found in plant populations, communities and ecosystems across environments for at least the past century. The vast body of research in functional ecology has drastically improved understanding of how individuals respond to their environment, communities are assembled and ecosystems function. However, with limited exceptions, few studies have quantified differences in plant function during the earliest stages of the plant life cycle, and fewer have tested how this early variability shapes populations, communities and ecosystems.Drawing from the literature and our collective experience, we describe the current state of knowledge in seedling functional ecology and provide examples of how this subdiscipline can enrich our fundamental understanding of plant function across levels of organisation. To inspire progressive work in this area, we also outline key considerations involved in seedling functional research (who, what, when, where and how to measure seedling traits) and identify remaining challenges and gaps in understanding around methodological approaches.Within this conceptual synthesis, we highlight three critical areas in seedling ecology for future research to target. First, given wide variation in the definition of a 'seedling', we provide a standard definition based on seed reserve dependence while emphasising the need to measure ontogenetic variation more clearly both within and following the seedling stage. Second, studies demonstrate that seedlings can be studied in multiple media (e.g. soil, agar, filter paper) and conditions (e.g. field, greenhouse, laboratory). We recommend that researchers select methods based on explicit goals, yet follow standard guidelines to reduce methodological noise across studies. Third, research is critically needed to assess the implications of different methodologies on trait measurement and compatibility across studies.By highlighting the importance of seedling functional ecology and suggesting pathways to address key challenges, we aim to inspire future research that generates useful and comparable data on seedling functional ecology. This work is critical to explain variation within and among populations, communities and ecosystems and integrate this most vulnerable stage of plant life into ecological frameworks. [ABSTRACT FROM AUTHOR]

The present study describes the phytoremediation performance of water lettuce (Pistia stratiotes L.) for physicochemical pollutants elimination from paper mill effluent (PME). For this, pot (glass aquarium) experiments were conducted using 0% (BWW: borewell water), 25%, 50%, 75%, and 100% treatments of PME under natural day/light regime. Results of the experiments showed that the highest removal of pH (10.75%), electrical conductivity (EC: 63.82%), total dissolved solids (TDS: 71.20%) biological oxygen demand (BOD: 85.03%), chemical oxygen demand (COD: 80.46%), total Kjeldahl's nitrogen (TKN: 93.03%), phosphorus (P: 85.56%), sodium (Na: 91.89%), potassium (K: 84.04%), calcium (Ca: 84.75%), and magnesium (Mg: 83.62%), most probable number (MPN: 77.63%), and standard plate count (SPC: 74.43%) was noted in 75% treatment of PME after treatment by P. stratiotes. PCA showed the best vector length for TKN, Na, and Ca. The maximum plant growth parameters including, total fresh biomass (81.30 ± 0.28 g), chlorophyll content (3.67 ± 0.05 mg g−1 f.wt), and relative growth rate (0.0051 gg−1 d−1) was also measured in 75% PME treatment after phytoremediation experiments. The findings of this study make useful insight into the biological management of PME through plant‐based pollutant eradication while leftover biomass may be used as a feedstock for low‐cost bioenergy production. Practitioner points: Biological treatment of paper mill effluent using water lettuce is presented.Best reduction of physicochemical and microbiological pollutants was attained in 75% treatment.Maximum production of chlorophyll, plant biomass, and highest growth rate was also observed in 75% treatment. [ABSTRACT FROM AUTHOR]

Background: Total paper dust exposure has been associated with respiratory problems among workers in the soft tissue paper industry. However, a comprehensive job exposure matrix (JEM) has not been developed for application to this industry. Our study was intended to address this need and to support further studies of mortality and morbidity in a cohort of Swedish workers from this industry. Methods: We evaluated four participating soft tissue paper mills in Sweden. We combined information on process and equipment status from the mills with knowledge of the mills obtained through research efforts and paper dust measurements made at all four mills to develop a semi‐quantitative JEM with seven dust exposure levels. The JEM was targeted at workers enrolled into a soft tissue paper mill cohort and working any time between 1960 and 2009. Results: The JEM includes a total of 14 421 cells, with each cell corresponding to the exposure for a job title, department, or work location for a one‐year period. Exposure levels in the JEM were estimated to decline at three of the four mills from 1971 to 2009, but overexposures (ie, exceedances of the relevant occupational exposure limits) remained common at the end of the period. Conclusions: The JEM results highlight the need for ongoing exposure control efforts in the soft tissue paper industry, and will inform ongoing epidemiological studies of the health effects of exposure to paper dust in Sweden. It is freely available for use by other researchers. [ABSTRACT FROM AUTHOR]

Summary: Despite major improvements in recycling over the last decades, the pulp and paper sector is a significant contributor to global greenhouse gas emissions and other environmental pressures. Further reduction of virgin material requirements and environmental impacts requires a detailed understanding of the global material flows in paper production and consumption. This study constructs a Sankey diagram of global material flows in the paper life cycle, from primary inputs to end‐of‐life waste treatment, based on a review of publicly available data. It then analyzes potential improvements in material flows and discusses recycling and material efficiency metrics. The article argues that the use of the collection rate as a recycling metric does not directly stimulate avoidance of virgin inputs and associated impacts. An alternative metric compares paper for recycling (recovered paper) with total fibrous inputs and indicates that the current rate is at just over half of the technical potential. Material efficiency metrics are found to be more useful if they relate to the reuse potential of wastes. The material balance developed in this research provides a solid basis for further study of global sustainable production and consumption of paper. The conclusions on recycling and efficiency should be considered for improving environmental assessment and stimulating a shift toward resource efficiency and the circular economy. [ABSTRACT FROM AUTHOR]

Regulation of fluorescence and self‐assembly of a salicylaldehyde azine‐containing amphiphile by a water‐soluble pillar[5]arene via host–guest recognition in water was realized. The fluorescence and the self‐assembled aggregates of the bola‐type amphiphile G can be tailored by adding different amounts of water‐soluble pillar[5]arene (WP5). In addition, the emission property and self‐assembly behavior of G and WP5 are responsive to pH conditions. Furthermore, the fluorescence emission property of G and the regulation by WP5 or pH conditions was applied as information encryption material, rewritable paper, and erasable ink. We believe that this fluorescence regulation strategy is promising for the construction of advanced fluorescent organic materials. [ABSTRACT FROM AUTHOR]

Introduction: In allergic asthma patients, one of the more common phenotypes might benefit from allergen immunotherapy (AIT) as add‐on intervention to pharmacological treatment. AIT is a treatment with disease‐modifying modalities, the evidence for efficacy is based on controlled clinical trials following standardized endpoint measures. However, so far there is a lack of a consensus for asthma endpoints in AIT trials. The aim of a task force (TF) of the European Academy of Allergy and Clinical Immunology (EAACI) is evaluating several outcome measures for AIT in allergic asthma. Methods: The following domains of outcome measures in asthmatic patients have been evaluated for this position paper (PP): (i) exacerbation rate, (ii) lung function, (iii) ICS withdrawal, (iv) symptoms and rescue medication use, (v) questionnaires (PROMS), (vi) bronchial/nasal provocation, (vii) allergen exposure chambers (AEC) and (viii) biomarkers. Results: Exacerbation rate can be used as a reliable objective primary outcome; however, there is limited evidence due to different definitions of exacerbation. The time after ICS withdrawal to first exacerbation is considered a primary outcome measure. Besides, the advantages and disadvantages and clinical implications of further domains of asthma endpoints in AIT trials are elaborated in this PP. Conclusion: This EAACI‐PP aims to highlight important aspects of current asthma measures by critically evaluating their applicability for controlled trials of AIT. [ABSTRACT FROM AUTHOR]

To achieve scientific progress in terms of building a cumulative body of knowledge, careful attention to benchmarking is of the utmost importance, requiring that proposals of new methods are extensively and carefully compared with their best predecessors, and existing methods subjected to neutral comparison studies. Answers to benchmarking questions should be evidence‐based, with the relevant evidence being collected through well‐thought‐out procedures, in reproducible and replicable ways. In the present paper, we review good research practices in benchmarking from the perspective of the area of cluster analysis. Discussion is given to the theoretical, conceptual underpinnings of benchmarking based on simulated and empirical data in this context. Subsequently, the practicalities of how to address benchmarking questions in clustering are dealt with, and foundational recommendations are made based on existing literature. This article is categorized under:Fundamental Concepts of Data and Knowledge > Data ConceptsFundamental Concepts of Data and Knowledge > Key Design Issues in Data MiningTechnologies > Structure Discovery and Clustering [ABSTRACT FROM AUTHOR]

Plain language summary: Over one‐quarter of women in the UK have a caesarean birth (CB). More than one in 20 of these births occurs near the end of labour, when the cervix is fully dilated (second stage). In these circumstances, and when labour has been prolonged, the baby's head can become lodged deep in the maternal pelvis making it challenging to deliver the baby. During the caesarean birth, difficulty in delivery of the baby's head may result – this emergency is known as impacted fetal head (IFH). These are technically challenging births that pose significant risks to both the woman and baby. Complications for the woman include tears in the womb, serious bleeding and longer hospital stay. Babies are at increased risk of injury including damage to the head and face, lack of oxygen to the brain, nerve damage, and in rare cases, the baby may die from these complications. Maternity staff are increasingly encountering IFH at CB, and reports of associated injuries have risen dramatically in recent years. The latest UK studies suggest that IFH may complicate as many as one in 10 unplanned CBs (1.5% of all births) and that two in 100 babies affected by IFH die or are seriously injured. Moreover, there has been a sharp increase in reports of babies having brain injuries when their birth was complicated by IFH. When an IFH occurs, the maternity team can use different approaches to help deliver the baby's head at CB. These include: an assistant (another obstetrician or midwife) pushing the head up from the vagina; delivering the baby feet first; using a specially designed inflatable balloon device to elevate the baby's head and/or giving the mother a medicine to relax the womb. However, there is currently no consensus for how best to manage these births. This has resulted in a lack of confidence among maternity staff, variable practice and potentially avoidable harm in some circumstances. This paper reviews the current evidence regarding the prediction, prevention and management of IFH at CB, integrating findings from a systematic review commissioned from the National Guideline Alliance. [ABSTRACT FROM AUTHOR]

Mineralized polymer scaffolds have proven to be effective biomaterials for inducing osteoinductivity in bone tissue engineering. Sequential mineralization is a promising technique for depositing minerals in three‐dimensional (3D) scaffolds. Paper, which is made of cellulose fibers, can be used as a tissue scaffold due to its highly porous structure and flexibility, as well as its excellent ability to wick fluids and support the growth of bone cells. In this study, paper‐based, mineralized scaffolds were fabricated using sequential mineralization. We conducted experiments with two groups of scaffolds based on different incubation times in the mineralization solutions (30 min and 24 h). Ten cycles of mineralization were performed for each group. We found that the mineral content increased as the cycle number increased and that the 24‐h group scaffolds consistently had more mineralization than did the 30‐min group scaffolds when measured at the same cycle number. A quantitative reverse transcription‐polymerase chain reaction was performed for two osteogenic differentiation markers of the preosteoblasts that were grown on the mineralized paper scaffolds. The gene expression results for bone‐specific markers revealed that the mineralized scaffolds were osteoinductive. Subcutaneous implantation of the scaffolds in rats demonstrated favorable biocompatibility, high vascularization, and non‐immunogenicity in vivo. The overall results suggest that the sequentially mineralized paper scaffolds are promising materials for use in bone tissue engineering. [ABSTRACT FROM AUTHOR]

The employment of ultra‐thin lithium metal anode with high loading cathode is the key to realizing high‐energy‐density rechargeable lithium batteries. Ultra‐thin lithium foils are routinely loaded on a copper substrate in batteries, however, the close contact of these two metals causes galvanic corrosion in the presence of electrolyte, which results in irreversible consumption of lithium and decomposition of electrolyte. Herein, a lightweight and highly conductive flexible graphite paper (GP) is applied to replace Cu foil as the current collector for lithium metal anode. It is demonstrated that the application of GP prevents galvanic corrosion and maintains intimate and steady contact between Li foil and GP current collector during cycling, thereby improving the electrochemical performance of the battery. A 1.08 Ah pouch cell assembled with Li@GP anode and LiNi0.8Co0.1Mn0.1O2 cathode exhibits a long lifetime of 240 cycles with a capacity retention of 91.6% under limited Li, high cathode loading and lean electrolyte conditions. [ABSTRACT FROM AUTHOR]

Rapid and sensitive detection of tetracycline (TC) in the aquatic environment is important for the environmental ecosystem and human health. Herein, we presented on the first attempt to construct a fast‐responding gating system by using horseradish peroxidase (HRP)‐loaded functional RNA superstructures (HRP@3D RNA). Proteins were directly loaded into 3D RNA by the rolling circle transcription (RCT) reaction. We found that the specificity of aptamer‐ligand interaction could serve as a triggered manner to release the loaded HRP from 3D RNA. The above general scheme showed a few minutes of rapid release kinetics. According to the controlled‐release mechanism, we designed a disposable origami paper‐based analytical device (doPAD) coupled with HRP@3D RNA for colorimetric detection of TC. This doPAD can realize target recognition and signal readout by taking advantage of the unique spatial control advantages of 3D origami, thus generating a signal of color change that is positively related to the concentration of TC. This doPAD achieved the quantitative analysis of TC with a limit of detection of 10 nM within 41 min. We envision that the platform will be widely used in the field of environmental monitoring and biosensing. [ABSTRACT FROM AUTHOR]

The Journal of Industrial Ecology has awarded the 2022 Graedel Prizes for the best papers in the field. This year, two prizes were awarded in the junior first author category. The winning papers focused on topics such as urban industrial ecology, metal flows, and the impact of micro- and nano-sized plastics. The winning papers were praised for their professional merit, contribution, and presentation quality. The authors of the winning papers were recognized for their high-quality research and the potential impact of their work in their respective fields. [Extracted from the article]

Paper has become one of the most promising substrates for building low‐cost and powerful sensing platforms due to its self‐pumping ability and compatibility with multiple patterning methods. Paper‐based sensors have been greatly developed in the field of environmental monitoring. In this review, we introduced the research and application of paper‐based sensors in environmental monitoring, focusing on the deposition and patterning methods of building paper‐based sensors, and summarized the applications of detecting environmental pollutants, including metal ions, anions, explosives, neurotoxins, volatile organic compounds, and small molecules. In addition, the development prospects and challenges of promoting paper‐based sensors are also discussed. The current review will provide references for the construction of portable paper‐based sensors, and has implications for the field of on‐site real‐time detection of the environment. [ABSTRACT FROM AUTHOR]

Oil‐paper composite is the main insulation system in oil‐filled transformers. In recent years, the use of nanotechnology to improve the electrical and thermal properties of transformer oil has become a field of research interest. In this paper, the electrical properties such as breakdown strength, volume resistivity, and dielectric response of nano‐filled oil‐paper insulation are evaluated. The evaluation is carried out on a double‐layer of oil‐paper composites insulation. The double‐layer samples are prepared considering different nano‐filler types. The studied nano‐filler types are Pb3O4, Al2O3, and SiO2 with average particle size 25 nm of each. For each nano‐filler type, oil‐paper samples with different concentrations (0.04, 0.06, 0.1, 0.2, and 0.4 g/L) are prepared. The effect of nano‐filler types on the breakdown strength, volume resistivity, and dielectric response of oil‐paper composites are highly evaluated. The results show that the filler types as well as filler permittivity affects the breakdown strength, volume resistivity, and dielectric response of oil‐paper composites insulation. Also, the results show that nano‐filler with high permittivity gives higher improvement in breakdown strength of Oil‐paper composite compared nano‐filler with low permittivity. Finally, the interpretation of all obtained results considering breakdown strength, volume resistivity, and dielectric response is highly reported. [ABSTRACT FROM AUTHOR]

This study reports the selective hydroxylation of macroscopic carbon surfaces that renders initially hydrophobic carbon fiber paper hydrophilic for more than one year (62 weeks) so far. This long time of sustained hydrophilicity is unprecedented and transforms the utility of macroscopic carbon materials. Quantification of surface oxygenates of a systematic series of 13 chemical treatments reveals that surface hydroxyls are predictors of long‐lasting hydrophilicity. The rapid, mild, acid‐free, transition‐metal‐free treatment does not leave surface residues, inhibits overoxidation of graphitic carbon beyond hydroxyls, and introduces the highest edge density on carbon surfaces, without altering the mesostructure of carbon fiber network architectures and without lowering the flexural strength of carbon fiber paper. Graphitic edges are required for enhanced stability of surface oxygenates that retain a threshold amount of adsorbed water, which is necessary for keeping carbon fiber paper hydrophilic. Application of hydrophilic carbon fiber paper as high‐surface‐area working electrode supports for alkaline water oxidation catalyzed by [NiFe]‐layered double hydroxide nanosheets demonstrates a factor of 60 higher mass activity compared to catalysis on flat basal‐plane highly ordered pyrolytic graphite electrodes. [ABSTRACT FROM AUTHOR]

Among plastic items, single‐use straws are particularly detrimental to marine ecosystems because such straws, including those made of poly(lactic acid) (PLA), are sharp and extremely slowly degradable in the ocean. While paper straws are promising alternatives, they exhibit hydration‐induced swelling even when coated with a non‐degradable plastic coating and promote effervescence (fizzing) in soft drinks owing to their surface heterogeneities. In this study, upgraded paper straw is coated with poly(butylene succinate) cellulose nanocrystal (PBS/CNC) composites. CNC increases adhesion to paper owing to their similar chemical structures, optimizes crystalline PBS spherulites through effective nucleation, and reinforces the matrix through its anisotropic and rigid features. The straws are not only anti‐fizzing when used with soft drinks owing to their homogeneous and seamless surface coatings, but also highly water‐resistant and tough owing to their watertight surfaces. All degradable components effectively decompose under aerobic composting and in the marine environment. This technology contributes to United Nations Sustainable Development Goal 14 (Life Below Water). [ABSTRACT FROM AUTHOR]

Human–machine interaction will be revolutionarily different in the future Internet of Things (IoT) environments. Many displays will be adopted onto electronic devices to enhance human–device communication, even under a very bright sunlight ambience. Thus, power consumption and sunlight visibility are important attributes for this application. Electrophoretic displays (EPDs) have the inherent advantages of ultra‐low power consumption and high sunlight visibility, which are perfectly suitable for IoT applications. The low power consumption resulted from the balance of viscosity, gravity, and other complicated forces involved in the electrophoretic dispersion. This force balance is generally termed "bistability," meaning the particle‐packing can be stable without external power at black and white image states. However, good bistability implies a slow image updating rate, significantly degrades users' experience. In this work, a 3D network structure that undergoes disruption and reorganization with the particles' movement is utilized in the electrophoretic ink dispersion. Dynamic viscosity modulation enables the bistable and fast‐response dual‐working modes. The newly developed design can increase the response speed of EPDs by a factor of 2.38, simultaneously maintaining the bistability. The electronic ink with this reversible network provides a promising solution for the future video‐rate e‐paper displays. [ABSTRACT FROM AUTHOR]

Due to large sulfur (S) content and simple manufacturing techniques, free‐standing cathodes for lithium‐sulfur (Li−S) batteries are gaining a lot of attention recently. Waste office paper, which is consumed in large quantities annually, was used to make a free‐standing paper‐based carbon (FPC) substrate, which inherited fiber‐like morphology. In addition, reduced graphene oxide (rGO) nanosheets modified FPC (rGO@FPC) host was also prepared by a vacuum filtration method. After S impregnation, the FPC/S and rGO@FPC/S free‐standing cathodes were employed in Li−S batteries. The rGO@FPC/S free‐standing cathode exhibited extremely competitive electrochemical performance, including a reversible discharge capacity of 315 mAh g−1 at 0.5 C after 500 cycles. This is due to the uniform S distribution, which boosts the utilization ratio, and the significant blocking action for polysulfide ions, which prevents the redox shuttle effect. [ABSTRACT FROM AUTHOR]

Lignin‐carbohydrate complexes (LCC) underpin the comprehensive properties of natural wood. Facile restoration of LCC analogues in paper is challenging because of the charge repulsion between negatively charged lignin and pulp fibrils. A camouflage strategy is discovered to prepare positively charged lignosulfonate–polyamide‐epichlorohydrin complex (LPC) nanoparticles, which are effectively incorporated in pulp through the "LPC–pulp" attraction instead of "lignosulfonate–pulp" repulsion. Water‐resistant LPC paper sheets are prepared in ≈20 min without pressurization. They exhibit high tensile strength (41 MPa), surviving boiling water treatment for 14 days, on par with the strength of pristine paper and certain plastics in a dry state. The camouflage strategy applies to various pulps and processing technologies, as exemplified by a paper separator showing exceptional electrolyte wettability and rate capability in lithium‐ion batteries. This work establishes advanced cellulose valorization with combined strength, water stability, and tailored microstructures replacing petroleum polymers in engineering and energy implications. [ABSTRACT FROM AUTHOR]

Paper has been extensively accepted as an ideal platform for fabricating low‐cost, flexible, and environmentally friendly electronics. However, current paper‐based pressure sensors have not fully demonstrated the unique merits of paper, such as cost efficiency, disposability, cuttability, and foldability, mainly because of the limitation of the applied metal electrodes and device configuration. Here, an all‐organic, all‐paper, cuttable, and foldable pressure sensor is demonstrated for the first time, with the high‐conductivity polypyrrole (PPy) printing paper as electrode and the low‐conductivity PPy tissue paper as active layer. Hollow and 3D all‐paper sensors are realized through fabricating the kirigami or origami structure since the device can be freely cut and folded, presenting a universal strategy promising for flexible device design. The cuttability and foldability of device create a unique 3D perception capability. The devices show high sensitivity (4.8 kPa−1 at < 5.5 kPa, 1.7 kPa−1 at 5.5–40 kPa) and wide detection range (up to 40 kPa), providing a capability for full‐range detection of human physiological and motion signals. These results open a feasible route to realize hollow and 3D sensors and fully demonstrate the potential of paper sensors for diverse applications to new‐generation green electronics and portable electronics. [ABSTRACT FROM AUTHOR]

To more reasonably allocate a paper's credit, this article argues that both a paper's authors and references contribute to a given paper. Accordingly, we quantitatively represent the proportion of contributions from each author and reference to a paper. A paper's credit can be allocated among its authors and references based on their contributions. All papers carry innate credit because of publication. If cited, they also carry external credit from the citing papers. The proportion of a paper's credit allocated to references can be regarded as a credit output and serves as an input for these references. In this scenario, only the credit assigned to a paper's authors remains as the paper's deserved credit. The credit of papers can be transferred in a direction opposite that of knowledge diffusion. Via this method, the estimate of an individual reference's contribution incorporates content‐based citation analysis, a promising method to differentiate different citations. A paper's deserved credit represents the contribution of the paper's authors to the scientific community via the new knowledge they provide in the paper. Therefore, it is rational to evaluate papers according to their deserved credit, not the credit they carry. [ABSTRACT FROM AUTHOR]

Cellulases are used in textile, pulp and paper, brewery and wine, sugars, and ethanol industries. Four fungal isolates obtained from organic municipal solid wastes (OMSW) were selected based on their cellulolytic activity on carboxymethyl cellulose (CMC) agar medium. Based on the internal transcribed spacer (ITS) sequence of the ribosomal DNA, the four cellulolytic isolates were identified as Aspergillus fumigatus AKAL1, Aspergillus oryzae AKAL4, Aspergillus flavus AKAL8, and Aspergillus flavus AKAL9. After 9 days of fermentation at 30°C and pH 6.5 under 110 rpm agitation, these isolates produced the maximum amount of cellulase. The cellulase showed optimum activity at temperature 35–40°C and pH 6.0–7.0 and was stable for 1 h at 25–45°C and pH 5.0–7.0. The Mg2+ and Zn2+ significantly increased but Hg2+, K+, and Ca2+ severely repressed the cellulase activity. Degradation of filter papers and bio‐stoning of denim was successfully done with the crude cellulase. An endo‐β‐1,4‐glucanase was isolated and characterized from Aspergillus isolates. Genome‐wide analysis revealed that the genomes of A. oryzae, A. fumigatus, and A. flavus, the pertinent species of the fungal isolates, had 23, 25, and 22 cellulase genes, respectively. Phylogenetic analysis revealed that the cellulases in these fungal species were divided into three major groups, and the isolated endo‐β‐1,4‐glucanase clustered to Group II. Ten different motifs are present in cellulases of the three species. Results herein provide a valuable resource for understanding cellulase genes in Aspergillus species and potential application of cellulase in textile and fermentable sugars production industries. [ABSTRACT FROM AUTHOR]

The electrode material made by conversion/alloying reaction possesses a high capacity but suffers from serious volumetric variation and pulverization during electrochemical storage cycling of sodium ions. Herein, we designed the coralloid‐like CoP with N,P‐codoped carbon shell on carbon paper derived from a metal‐organic framework shell. The N,P‐codoped carbon shell not only keeps the structural integrity of the nanomaterial but also introduces vacancies on the electrode material to provide abundant coordination of unsaturated sites for sodium storage. The optimized coralloid‐like CoP with N,P‐codoped carbon shell on carbon paper delivers a high reversible capacity of 318.9 mAh g−1 at 200 mA g−1 after 150 cycles. Even when the current density is 1000 mA g−1 after 1000 cycles, it still maintains a high discharge capacity of 191.2 mAh g−1. The electrochemical analysis reveals self‐standing hierarchical structure benefits to the chemical mass diffusion and electron conduction. This work provides a new strategy for the exploitation of advanced anode electrodes with a long life for sodium‐ion batteries. [ABSTRACT FROM AUTHOR]

This study developed an inexpensive and easy‐to‐use milk freshness indicator (H‐Paper) by rub‐coating hibiscus flowers onto paper. As per the best of our knowledge, this is the first example of a food quality indicator prepared by direct hand‐rubbing of a natural halochromic material onto paper substrates. Unlike the previously reported colorimetric indicators from natural sources, our indicator does not require the extraction of anthocyanins from the natural product. The H‐Paper undergoes a quantifiable color change from green to purple to pink corresponding to fresh, spoiling, and spoiled milk samples. Digital photographs of H‐Paper treated with milk samples were acquired using a smartphone, and RGB indices were analyzed using a free application. The red chromatic shift was used as a parameter to quantify color change of H‐Paper to follow the spoilage of milk. Anthocyanins present in the hibiscus flowers are responsible for this colorimetric response. This work demonstrates a proof‐of‐concept for directly rub‐coating halochromic materials onto a substrate to fabricate food freshness indicators. The H‐Paper indicator has advantages of naked‐eye analysis, consumer‐friendliness, and instrument‐free operation. This requires neither any laboratory accessories nor the expertise of a trained analyst for its preparation and operation, which is appropriate for use in resource‐limited settings. [ABSTRACT FROM AUTHOR]

The small‐signal dielectric and piezoelectric coefficients of paper‐derived sodium potassium niobate, K0.5Na0.5NbO3 (KNN), were compared with those of conventionally prepared samples. Results show similar functional properties of paper‐derived KNN without significantly decreasing the small‐signal piezoelectric coefficient. The structure and microstructure analysis of conventional KNN and paper‐derived KNN did not reveal any significant difference in the crystal structure and grain size. However, the temperature‐dependent inter‐ferroelectric phase transition temperature estimated from the temperature‐dependent dielectric permittivity data revealed a decrease of approximately 18°C for the paper‐derived KNN and is possibly associated with the structural and microstructural defects. This work indicates that optimizing suspension chemistry and sintering conditions will be critical to enhance the functional response of paper‐derived KNN further. Moreover, paper‐derived ceramic processing, a novel and cost‐effective additive manufacturing technology, can be potentially used to fabricate other electroceramics with a wide range of porosities and sizes as well as complex geometries and multilayer structures. [ABSTRACT FROM AUTHOR]

In the European Union (EU), Regulation (EC) 1935/2004 provides a harmonized legal EU framework and sets out the general principles for safety and inertness for all Food Contact Materials (FCMs) and Food Contact Articles. From a food safety point of view, however, specific EU legislation for paper and cardboard FCMs is lacking, while at Member State level, national legislation differs among countries. More than 11,000 chemicals have been identified in all types of FCMs, most of them without any information on toxicity or migration potential from FCM to food. The present review shows a wide variability of protocols, approaches, and conditions used in scientific studies, which are difficult to compare. In this regard, procedures and conditions laid down in EU legislation for plastics and European Standards (EN protocols) may serve as a good basis for the future sample preparation procedures in the framework of paper and cardboard FCMs safety assessment. Challenges on sample preparation procedures are presented involving the interlinked steps of sample preparation, conditions used and their impact in chemical analysis and in vitro bioassay testing. Currently, there is no general consensus on the criteria for structuring, evaluating, and tuning sample preparation procedures for paper and cardboard FCMs. For this purpose, a set of modified criteria and a decision tree are proposed based on the literature. Along this, mass transfer processes occurring in paper and cardboard FCMs and parameters affecting chemical migration need to be accounted for prior to reaching general consensus on criteria for sample preparation procedures. [ABSTRACT FROM AUTHOR]

An efficient method that utilizes simple techniques, easy operation, and low‐cost production to create flexible graphene‐based materials is a worthy practical challenge. A rapid strategy for preparing flexible, functional graphene oxide (GO) is introduced using GO‐ethanol dispersion filtration. The filtration process is highly efficient and drying time is significantly reduced by employing ethanol as solvent, due to the fact that ethanol is a volatile liquid. Freestanding GO papers can be harvested with ultralarge size (700 cm2), color variety, and writable characteristics. After reduction, N‐doped graphene (NDG) papers still maintain good foldability with improved electric conductivity and porous structure. When used as an electrode for a supercapacitor, the flexible NDG paper device demonstrates good electrochemical performance even with size expansion and extreme double folding. Moreover, this NDG paper capacitor device shows a good electrosorption performance for capacitive deionization of sulfate and chromate in groundwater system. These flexible GO and NDG papers promise potential to facilitate the production of graphene‐based materials for practical applications in energy and environmental related fields. [ABSTRACT FROM AUTHOR]

Inkjet printing (IJP) is the most widespread direct‐write technique in paper electronics. However, this technique cannot be used for printing devices on untreated regular paper, since its low‐viscosity nanoinks leak through the cellulose fibers. Thus, a planarization coating is frequently used as a barrier, even though this makes substrates more expensive and less eco‐friendly. Alternatively, high solid content screen printing (SP) inks could allow printing on regular paper due to their high viscosity and large particle size; however, they cannot be printed through IJP. Another digital technique is then required: laser‐induced forward transfer (LIFT). This work aims at proving the feasibility of LIFT for printing devices on regular paper. The main transfer parameters are systematically varied to obtain uniform Ag‐SP interconnects, whose performance is improved by a multiple‐printing approach. It results in low resistances with much better performance than those typical of IJP. After optimizing the functionality of the printed lines, a proof‐of‐concept consisting of a radio‐frequency inductor is provided. The characterization of the device shows a substantially higher performance than that of the same device printed with IJP ink in similar conditions, which proves the potential of LIFT for digitally fabricating devices on regular paper. [ABSTRACT FROM AUTHOR]