Search

Compared with the conventional emulsification method, droplets generated within microfluidic devices exhibit distinct advantages such as precise control of fluids, exceptional monodispersity, uniform morphology, flexible manipulation, and narrow size distribution. These inherent benefits, including intrinsic safety, excellent heat and mass transfer capabilities, and large surface‐to‐volume ratio, have led to the widespread applications of droplet‐based microfluidics across diverse fields, encompassing chemical engineering, particle synthesis, biological detection, diagnostics, emulsion preparation, and pharmaceuticals. However, despite its promising potential for versatile applications, the practical utilization of this technology in commercial and industrial is extremely limited to the inherently low production rates achievable within a single microchannel. Over the past two decades, droplet‐based microfluidics has evolved significantly, considerably transitioning from a proof‐of‐concept stage to industrialization. And now there is a growing trend towards translating academic research into commercial and industrial applications, primarily driven by the burgeoning demands of various fields. This paper comprehensively reviews recent advancements in droplet‐based microfluidics, covering the fundamental working principles and the critical aspect of scale‐up integration from working principles to scale‐up integration. Based on the existing scale‐up strategies, the paper also outlines the future research directions, identifies the potential opportunities, and addresses the typical unsolved challenges. [ABSTRACT FROM AUTHOR]

In recent years there has been a growing interest in the scale‐up and commercialization of lignocellulosic biorefinery. Process simulation is a crucial preliminary study, conducted at the system level, to evaluate the feasibility of industrializing biorefinery operations. Numerous research studies have been conducted on the application of process simulation in lignocellulosic biorefinery, making it essential to provide a detailed introduction to this topic. This paper summarizes two aspects of the application of process simulation in lignocellulosic biorefinery: the production of bioenergy and the production of biochemicals. The bioenergy section describes the application of process simulation to hydrochar, syngas, and bioethanol. The biochemicals section relates to the production processes for cellulose, lignin, and hemicellulose. Additionally, the research status of process simulation in biorefinery are detailed from the following aspects: physical property parameters, kinetic study, the variety of raw materials and validation. Finally, this paper discusses some advances in biorefinery process simulation. It is hoped that this paper will assist the industrialization of lignocellulosic biorefinery. [ABSTRACT FROM AUTHOR]

This paper examines research in the area of leadership and the fourth industrial revolution (4IR) by scoping literature through a systematic approach. The purpose of this study is to identify trends and gaps relating to issues addressed, theoretical and conceptual approaches, methodologies, geographical representation of research, and future research directions in the area. In all, 45 articles were sampled through a predetermined selection criteria and analysed using descriptive statistics. The results indicate that four major issues investigated in multiple sectors dominate the area. Besides, a number of theories were found to have been used in understanding the topic, while in terms of methodology, there appears to be a fair distribution of papers using qualitative and quantitative approaches but an imbalance between cross‐sectional and longitudinal designs. Again, most of the studies were conducted at the meso and micro levels and were produced in Asia, Europe, Africa, North America, Australia, and South America in that ranking order. Overall, it was realised that because of the emerging nature of the 4IR phenomenon, research work in the area is now rising, requiring further research output to address the gaps identified through this study. [ABSTRACT FROM AUTHOR]

The way to Construction 4.0 in the production and construction of infrastructure projects The construction industry is facing profound changes. Among other things, the requirement of implementing a more sustainable building culture, the increasing shortage of skilled workers and the rising demand for infrastructure construction projects, are challenges of today. Indeed, the industry will not succeed in solving these challenges with the procedures and processes that have been practised for decades. Therefore, it is important to prepare the construction industry for the implementation of Construction 4.0. This paper explains what is behind the term Construction 4.0 and what difficulties currently exist in its implementation. Based on this, recommendations, measures and initial approaches for implementing are presented. Thereby, the paper focus on the production and construction phase of infrastructure projects, which is important for construction companies. [ABSTRACT FROM AUTHOR]

Since the "double carbon" target was proposed in 2020, emissions reduction has become the focus of the Chinese government's work. Industrial development is a crucial factor contributing to the increase in carbon emissions. Therefore, implementing carbon reduction in the industrial sector is an important part of China's goal of "double carbon." In this context, this paper uses a three‐stage data envelopment analysis model to calculate the green total factor productivity (GTFP) of 18 industry sectors in Shanxi Province. The results show that: (1) the external environment has influence on the GTFP of energy revolution reform pilot area industrial sectors, and the efficiency value of two industries is overestimated before excluding environmental factors; (2) the industry difference of GTFP is significant, among which pharmaceutical manufacturing industry has the greatest promoting effect on GTFP, and ferrous metal mining and dressing industry has the greatest inhibiting effect on GTFP; (3) there is a serious redundancy in R&D investment of energy revolution reform pilot area in China, and only six industries belong to zero redundancy. (4) To reflect the GTFP of various industrial sectors more clearly, this paper divides four industries: "Double‐high" industry, "High‐low" industry, "Low‐high" industry, and "Double‐low" industry. [ABSTRACT FROM AUTHOR]

Industrialization constitutes one of the strategies of structural transformation in many sub‐Saharan African (SSA) countries. In this paper, we re‐examine the effect of financial development on the industrialization of 35 SSA countries over the period 1996–2018. Contrary to previous work, we formulate the hypothesis that there exists a threshold of financial development beyond which financial development positively influences industrialization. Using the dynamic panel threshold regression model, and system generalized methods of moment models, we find two main results. First, financial development has a negative and significant impact on the development of industrialization. Secondly, the findings show the existence of a nonlinear relationship between financial development and industrialization development. Thus, we find that financial development has a negative effect on industrialization below the threshold while the effect is significantly positive on industrialization in countries whose financial development is above the threshold. The results are stable to the different robustness tests used. These findings highlight the need for SSA countries to develop better financial institutions if they hope to boost the manufacturing sector. [ABSTRACT FROM AUTHOR]

Application of BIM in the context of Construction 4.0 in the Oberbürgermeister‐Karl‐Lehr bridge project The construction industry is facing new demands, such as the creation of a more sustainable building culture and the necessary increase in efficiency. These challenges can only be solved with the help of modern planning and construction methods such as Building Information Modelling, which opens the way to Building 4.0. Due to the increasing requirements for implementing the BIM method in infrastructure projects, it is important for companies to build up experience. For this reason, the Max Bögl Group decided to use the BIM method in the production and construction phase of the Oberbürgermeister‐Karl‐Lehr bridge project. In addition to an overview of the project, this paper provides a summary of the BIM methods used and the lessons learned. [ABSTRACT FROM AUTHOR]

Summary: Internet of Things (IoT) specifies a transparent and coherent integration of assorted and composite nodes. Unification of these nodes with large resources and servers has brought advancement in technology for industrial and government services. The industrial IoT (IIoT), with smart nodes, enhance the development and manufacturing of industrial process, which is on demand now. However, the security concern is substantial, and it is required to control to perform prosperous assimilation of IIoT. Authentication of these smart nodes and establishing mutual trust among them is essential to keep vulnerabilities and potential risks out. Hence, this paper presents an efficient lightweight secure authentication protocol from the perspective of human‐centered IIoT. This proposed scheme assumes a registration center which simply generates public and secret information for a node when it initially joins the network. Once registration is done, the registration center is not needed anymore, and advanced processes like mutual authentication, secure key exchange, and communications are independently done by nodes involved. Furthermore, we show that this scheme can reduce exponential computations and computational overhead and resolves various possible attacks. [ABSTRACT FROM AUTHOR]

System reconfiguration is essential in complex systems management, as it is an enabler of system flexibility and adaptability. It ensures system operation and increases reliability, availability, maintainability, testability, safety, and reuse of system entities and technologies. For the reconfiguration of a system in use, it is necessary to assess, in continuity, the system's state with regard to its context. Identifying data supporting system reconfiguration represents a major industrial challenge and is linked directly to the development of industrial reconfiguration tools. Reconfiguration tools are based on a data model, also called ontology, which represents key concepts of system reconfiguration and their relationships. A particular difficulty of developing the data model is the multi‐domain nature of reconfiguration. Furthermore, it needs to address a considerable diversity of system types. Few publications propose an ontology supporting data identification and tool development for the entire process. Hence, in this paper we propose to formalize the system reconfiguration process and propose an overarching ontology, which we call OSysRec. This ontology considers data at the management, dynamics, and structure level. The proposed ontology has been developed based upon expert knowledge and several industrial uses cases. The OSysRec ontology allowed a better understanding of the reconfiguration process, and hence it can be deployed for developing efficient and effective reconfiguration tools at the industrial scale. The ontology has been tested on an industrial case study to validate the proposed approach. [ABSTRACT FROM AUTHOR]

In global pattern reconstruction, ecological civilization construction and integrated urban–rural development in the new era as well as outlining a new framework for rural development and promoting efficient operation of the coordination mechanism for rural development are urgently required. This paper considers three northeastern provinces of China as an example, attempts to analyze the relationship between the subsystems of rural development, and examines the coupling coordination mechanism of population, land, and industry money in the four‐dimensional system. It explores the evolution path and defects of rural development in Northeast China under the background of transformation from a systematic perspective. We found that the coupling degree of "population‐land‐industry‐money" in rural Northeast China is high, while the coordination degree is low. The degree of spatial and temporal differentiation of the coupling coordination degree gradually increases, and the rural development of each province is highly unbalanced. The results also indicate that the main reasons for the low level of the coupling coordination degree are improved land development levels, a relative shortage of labor force, backward industrial development, and increasingly weak rural investment levels. Finally, this paper illustrates that the main solutions to rural revitalization are stimulating rural investment through policies and promoting the revival of agriculture, with financial support as the starting point, before establishing the linkage and mutual feed development of "population‐land‐industry‐money" in rural areas. The results will help countries, especially developing countries, to further consider methods toward achieving rural development. [ABSTRACT FROM AUTHOR]

The idea and related practices of slowness have received global attention, as these have been viewed as reactions to and critiques of this "go‐faster" world. Celebration of slowness has been especially prominent in South Korea, which experienced an accelerated transition to a post‐industrial society. In line with recent power‐sensitive studies of slowness, this paper develops a governmentality approach that examines how slowness shapes particular bodily behaviours. Drawing on recent work on rhythmanalysis and governmentalities, this study examines how slowness is enrolled and enacts the rhythmic governing of "Olle" walking – the South Korean countryside walking experience. It specifically relates the analysis to the site‐specific experience of accelerated modernisation, where the legacy of state‐led industrial development persists in the prevailing neoliberal capitalism. First, it examines the ways in which slow rhythm is involved in walking practice, deploying and reproducing a specific rhythm, body, and the mode of biopower. It then looks at several ways through which the emerging slow rhythm of Olle walking and the fast rhythm of everyday life are negotiated. This paper argues that slow walking can serve as an affirmative mode of rhythmic governing that fosters care of the self and the environment. [ABSTRACT FROM AUTHOR]

It has been speculated that by the year 2050, technology will have progressed to the point of complete autonomy. This paper scrolls through patent pathways and intellectual developments throughout the industrial revolutions listing significant products and services that landmarked each revolution up to Industry 4.0. The patent trails and the recent IPR inputs are expected to assist readers in fast‐tracking up to speed on the bleeding edge of the current research pools while having an eagle's eye perspective on the previous developments so far. The research pools of Industry 4.0 are classified and explored. A lack of Human‐machine workforce synergy in Industry 4.0 and the nascent "customized manufacturing" concept is addressed in subsequent sections. The paper classifies two expected phases of Industry 5.0, highlighting the subdomains touted to be its focal areas. Lastly, Industry 5.0's niche research areas are checked and a suitable pathway to achieve the goals set for the sixth revolution is proposed. [ABSTRACT FROM AUTHOR]

The paper empirically examines the internationalization‐output nexus in 15 late‐industrialized countries from 1976 to 2018 using fixed and random effects techniques. The findings reveal that trade openness negatively impacts the industrial output, while the labor force shows a positive and statistically significant impact. Domestic investment and education show negligible and insignificant positive and negative impacts on output, respectively. Investment is supposedly incurring zero marginal productivity of capital as it is high in excess of labor. In a nutshell, it is capital bias. Furthermore, bias in terms of complex skill requirements in production prevents the entry of less‐skilled labor force. Given these outcomes, we conclude that the incremental capital‐output ratio (ICOR) needs to be tested to find out additional intricate issues involved in investment. Besides, the comparative advantage in less skilled labor is underutilized. To overcome this, the policymakers should ensure absorption of such semi‐skilled human capital. This requires removing skill bias and capital bias to a reasonable extent without damaging output generation. Hence, the study suggested that the late‐industrialized nations may use the potential labor force and capital to speed‐up long‐term industrial development by enhancing human capital through training, technical know‐how, etc., to attain sustainable industrial development. [ABSTRACT FROM AUTHOR]

Ghana's petroleum industry is located several nautical miles offshore in the Western Region of the country. Yet, the mechanisms and processes of production and transportation of crude petroleum are accompanied by the dispossessing of the adjoining coastal communities of their means of (re)production both on the ocean and on land. Although the insights of agrarian political economy have been deployed fruitfully to analyse land grabs in Africa, similar efforts are rare when it comes to ocean grabs. With reference to the new development thinking on the ocean economy—or 'blue economy'—as the new frontier of resource‐based industrialization in Africa, we re‐frame the agrarian question and apply it to the offshore petroleum industry, expanding agrarian political‐economic theory of industrialization beyond its traditional confines of land and agriculture. Our paper makes two main theoretical contributions. First, it contributes to efforts in agrarian political economy to incorporate the ocean and fisheries. Second, we contribute a fresh theoretical framework for analysing offshore petroleum industries and their potential to contribute to industrialization in Africa. [ABSTRACT FROM AUTHOR]

Microalgae is one of the most important components in the aquatic ecosystem, and they are increasingly used in food and medicine production for human consumption due to their rapid growth cycle and survival ability in the harsh environment. Now, the exploration of microalgae has been gradually deepening, mainly focused on the field of nutrition, medicine, and cosmetics. A great deal of studies has shown that microalgae have a variety of functions in regulating the body health and preventing disease, such as nitrogen fixation, antitumor, antivirus, antioxidation, anti‐inflammatory, and antithrombotic. Furthermore, microalgae can synthesize various high‐valued bioactive substances, such as proteins, lipids, polysaccharides, and pigments. In this paper, we have briefly reviewed the research progress of main bioactive components in microalgae, proteins, lipids, polysaccharides, pigments, and other nutrients included, as well as their present application situation. This paper can provide the guidance for research and development of industrial production of microalgae. [ABSTRACT FROM AUTHOR]

Despite the considerable constraints of karst rocky desertification on the production and life of the locals and the regional economy, few studies have been conducted on areas with karst rocky desertification with the aim of exploring the balance between ecological governance and industrial development. In light of the promotion of featured advantageous industries to ecological governance and industrial development, this study aims to explore the mechanism of industrial revitalization in areas with karst rocky desertification to provide theoretical support for their industrial revitalization. Based on actor‐network theory, this paper presents a case study of Bashan village, a typical area in Guizhou province, China, with karst rocky desertification, to clarify the course of development of its Zanthoxylum bungeanum industry and propose a mechanism for its revitalization. The findings identify the main actors of the revitalization of the Z. bungeanum industry and reveal the driving forces behind it. Moreover, the study found that the industrial revitalization model is a bottom‐up process, which suggests strong endogenous dynamics. Through the revitalization of the featured industries, the results of the management of rocky desertification are transformed into economic output, which improved the livelihood of farmers and consolidated the effectiveness of management. [ABSTRACT FROM AUTHOR]

Insects are the largest biological group on the earth, characterized by high biodiversity, easy rearing, and large populations. The utilization of insects in China has a long history and some insect species have contributed to the formation of characteristic industries. Insect products, such as silk and honey, are already familiar to the public; however, many beneficial insects and their products are not well known to most people, for example, lac insect and lac, gall aphid and Chinese gallnut, and insect wax. A new industry featuring the utilization and industrialization of insects has been rising in China. Chemically, insect products are used as raw materials; agriculturally, insects are utilized to pollinate crops for better yield; natural enemy insects have been reared to control pests; insect protein may be used for human food or animal feed; medicinally, chemical compounds may be extracted from insects as active ingredients for pharmaceutical usage; and ornamental butterfly has been applied in travel sightseeing. Insects' new purpose and function will be exploited as they gain recognition for their resources. This paper reviews insect industrialization in China and discusses the prospect of insect commerce in the future. [ABSTRACT FROM AUTHOR]

Human agency has become a core topic in economic geography complementing traditional, structural approaches to explain regional development. This paper contributes firstly with a discussion of the theoretical and conceptual relationships between the agency of individuals, organizations, and systems. Secondly, it proposes a novel analytical framework for studying how human agency, combined with external changes affects regional economic development, and how regional structural preconditions and external changes explain the activation of change agency. Thirdly, the relevance of the framework is examined through comparative studies of about 20 years of industrial development in three Norwegian regions. This illuminates the importance of human agency in regional transformation processes, how regional preconditions influence but not determine the activation of change agency, as well as why and how regional policy plays a role in the emergence of change agency. Yet, future research needs to investigate the context conditions, which promote or hinder the activation of change agency, to trace change in economic activities over time and link it to causal mechanisms, and to pay attention to the unintended consequences of change agency in the longer‐term. [ABSTRACT FROM AUTHOR]

Summary: The evolution of Internet of Things (IoT) has led to the development of Industrial Internet of Things (IIoT). IIoT is one the widely applied areas to facilitate people in the manufacturing world. The adoption of IIoT automates sensing, capturing, communicating, and processing in real time. To understand how rapidly IoT and IIoT are growing, this article examines the emergence of 5G‐enabled IIoT, current research trends in IIoT, key milestones achieved in IIoT, and IoT applications specific to 5G‐enabled IIoT. The paper presents the state‐of‐the‐art in networking layered framework of IIoT and comparing relationships of technologies of cloud computing as well as edge computing paradigms. We also explored the type of security attacks and their preventive measures in an IIoT‐driven 5G technology. We have also highlighted the revolution of IIoT‐driven 5G framework which satisfies the demands of IIoT applications. [ABSTRACT FROM AUTHOR]

Due to enormous growth in industrial development, the consumption of cement is substantially increased in the recent times and the cement manufacturing industry produces annually about 1.35 billion tons of the greenhouse gas emissions which are about 7% of the total greenhouse gas emission by man‐made to the atmosphere. At the same time, the thermal power plants have been generating huge quantity of fly‐ash, which is not being recycled properly. This creates huge burden on solid waste management. Hence, to minimize the emission of CO2 from cement industry and to increase the utilization of fly‐ash, a geopolymer technology is one of the viable solutions. In terms of global warming, the geopolymer technology‐based fly‐ash activated by an alkaline activators not only have potential to significantly reduce carbon footprint of ordinary portland cement concrete, but also shows considerable promise for applications in concrete industry as an alternative binder to the Portland cement. This paper provides a brief status of fly‐ash based geopolymer paste and concrete, encapsulates, and analyses critically the most significant research findings on various properties of geopolymer concrete (GPC) over the past two decades. Also, it identifies the important factors to be considered in improving the performance of GPC at elevated temperatures as well as at ambient temperatures. Collation and analysis of more than 100 research papers in this area may provide a valuable stating document for further research. [ABSTRACT FROM AUTHOR]

This paper analyses the long‐term relationship between regional inequality and economic development. Our data set includes information on national and regional per capita GDP for four countries: France, Italy, Portugal and Spain, compiled on a decadal basis for the period 1860–2010. Using parametric and semiparametric regressions, our results confirm the rise and fall of regional inequalities over time although in recent decades they are on the rise again. Finally, we identify structural change as being a significant transmission mechanism of the inverted‐U relationship. The arrival of technological shocks, beginning during the onset of industrialization, and the transition from agrarian to industrial economies, would explain this result. [ABSTRACT FROM AUTHOR]

This paper seeks to establish the contribution of the Common Market for Eastern and Southern Africa (COMESA) programmes in promoting industrialization. It further seeks to establish the link between industrialization and productivity. The paper uses a gravity model to estimate a cross‐sectional time‐series (panel) dataset for the period 2001–2015. The results indicate that membership to COMESA has created large markets and promoted industrialization among member states. However, results also confirm that COMESA member states still heavily trade in industrial intermediates with non‐members. The study further reveals that the share of foreign total factor productivity (TFP) to COMESA's TFP are weaker than expected, which suggests non‐convergence to international knowledge spillovers. The study concludes that COMESA programmes have positively affected industrialization. We therefore recommend that COMESA should continue implementing strategies, policies and programmes that promote industrialization and technology transfer. [ABSTRACT FROM AUTHOR]

Fluid Flow Glazing in building envelopes The research project InDeWaG (Industrial Development of Fluid Flow Glazing Systems) has been funded for three‐and‐a‐half‐years by the European Union within the framework of the program HORIZON 2020. The focus of this project is an insulating glazing unit filled up with a water‐glycol fluid circulating within one of the IGU cavities. The glass units have been developed for both, the usage within façades and as interior separation walls. They are conceived to serve for both heating and cooling. The aim is to combine these units with other technologies in HVAC systems, such as Photovoltaic and high‐efficiency heat exchangers leading to minimized total energy consumptions of buildings without restrictions of daylight autonomy. The paper describes the idea behind fluid flow glazing. It focusses on the consideration of the single glazing units within the framework of thermal building simulation. First results of a demonstrator pavilion, in operation for one year, will be explained. [ABSTRACT FROM AUTHOR]

Female labour force participation (FLFP) increased significantly in the 20th century. Nevertheless, there are persisting spatial differences in FLFP. Using data from Germany, this paper demonstrates that regional differences in the degree of industrialization in the 1920s explain spatial variation in FLFP at that time and almost 100 years later. The latter finding is not explained by persisting industry structures. Additionally, there is evidence that regions with historically high FLFP have a higher social acceptance of working women. Together these results suggest that policies to increase FLFP should account for the historical context of each region. [ABSTRACT FROM AUTHOR]

Drawing upon a panel dataset on China's state‐owned construction land supply at the prefecture level, this paper adopts the spatial panel data model to investigate the existence of spatial dependence in the mechanisms behind China's urban land expansion from 2004 to 2014. The empirical results show that China's urban land expansion has been mainly influenced by a quadruple process of urbanization, industrialization, globalization and decentralization. The strong existence of spatial dependence in China's urban land expansion can be reflected by the significant coefficient estimates of the spatial lags of both the dependent variable and independent variables. [ABSTRACT FROM AUTHOR]

This study exposes and maps a hitherto little‐known dimension of China's urban geography – that of shrinkage, directly affecting one in 10 of its cities. Urban shrinkage is revealed to be a growing concern for the most populous country on earth, with the absolute number of shrinking cities rising by 71% from 164 in the 1990s to 281 in the 2000s. By developing its own definition of the city as an urban area (UA) in the Chinese political‐administrative context, this paper builds a morphologic taxonomy of China's shrinking cities. This reveals the overall net population loss across Chinese shrinking cities more than doubling since 1990, reaching 7.3 million inhabitants in 2010. Sixty‐eight Chinese UAs, mostly in north‐eastern China, are found to have been shrinking continuously since 1990. Despite the multifaceted and entangled make‐up of urban shrinkage, the paper identifies four distinct causes of this geographical phenomenon in China: (1) state‐incubated reindustrialisation and economic restructuring, impacting upon 63% of all shrinking UAs; (2) the country's new economic geography, with the underlying centripetal forces of agglomeration pushing around 34% of all shrinking cities towards marginalisation; (3) state‐propelled demographic change, leading to natural population decline in 26% of Chinese shrinking cities; and (4) state‐sponsored mega‐shrinkage, responsible for urban population loss in almost 20% of all the cases. This study further provides a theoretically informed reflection on the peculiarity of shrinkage in China and its public policy implications. This study exposes and maps a hitherto little‐known dimension of China's urban geography – that of shrinkage, directly affecting one in ten of its cities. The paper also identifies four distinct causes of this geographical phenomenon in China. [ABSTRACT FROM AUTHOR]

Abstract: This paper deals with industrialization in Italy between 1871 and 2001, and is based on data on the labour force per province (NUTS 3) from population censuses. Particular attention is devoted to long‐term trends and North–South disparities. After the analysis of the geographic spread of industry and its changes, we test the role of access to markets on the distribution of the labour force in manufacturing. The results show that access to markets played a main role in Italian industrialization and in the evolution of inequalities among Northern and Southern regions. [ABSTRACT FROM AUTHOR]

Microalgae are considered an interesting candidate for the sustainable production of edible oils. Because microalgae contain abundant polyunsaturated fatty acids (PUFA) and have high photosynthetic rates and high oil productivity, they are superior to terrestrial oleaginous crops for producing edible oils. Microalgae are cultivated in aquatic environments, and thus, oil extraction methods for microalgae must consider the influence of water. This paper provides an overview of the suitability of microalgal lipid compositions and proposes a selection of species for edible oil production. The numerous technologies currently available for pretreatment, wet extraction and the refining of edible oils from microalgae are collated and presented, with a primary focus on the key parameters influencing process performance. Furthermore, the paper presents a proposed solution for a microalgae integrated system for edible oil production, which is a possible future direction to develop an economical and environmentally friendly process for the resource utilization of microalgal biomass. Practical Application: Microalgae might be the most promising source of edible oils, with potential applications in food industrialization, due to its rich oil content and its characteristic fatty acid composition. The review provides a selection criterion of microalgal species to help researchers exploit microalgae to produce superior edible oils for human consumption. Various process parameters and wet extraction methods are discussed that may be conducive to improving process performance and achieving high oil recovery yields. By considering the maximum utilization of microalgal biomass, an integrated system in this review would assist in economical production during further studies. Microalgae are the most promising candidates for edible oil production. Cell disruption, extraction, and refining are important processes for microalgal oils and on this basis, wet extraction and resource utilization can further promote the economic feasibility of microalgal process. [ABSTRACT FROM AUTHOR]

This paper proposes a critical discussion of the political economy of hydropower construction in the communist space. We use political economy, economic history and political ecology literature in order to reveal the economic and political relations in which hydropower is embedded in socialist states. The case analysed is the Iron Gates, a joint Romanian-Yugoslav project which raises specific questions about the techno-political framework of the new 'hydraulic landscape' and its place in socialist economies and societies. The case reveals important transformations in the political and economic relations within the Soviet bloc and provides a description of the complex institutional setting used in the construction of the hydropower system. In parallel, the paper explores the contribution of political power in the construction of the Iron Gates and especially its use in connection with the ideological production of the new communist regime. [ABSTRACT FROM AUTHOR]

The purpose of this paper is to re-examine from a multidimensional perspective the possible existence of a single path that could have conditioned the degree of welfare state development ( WSD) in Latin America. Economic/industrial development, trade-openness, democracy and the strength of leftist parties-labour movement are used as explanatory variables in the qualitative comparative analysis. In contrast to previous findings, this paper shows that there is no evidence of a common path followed by countries with a relatively high/medium WSD. Nevertheless, countries that experienced a low economic/industrial development combined with a low democratic experience were conditioned to have low WSD. [ABSTRACT FROM AUTHOR]

Eco‐cultural island tourism is a global phenomenon. Accordingly, island studies has engaged with it through a variety of approaches, including relational geography perspectives. However, prevalent relational island studies theories tend to be based on remote, peripheralised archipelagos or urban island power centres and may thus be inappropriate for certain kinds of small, near‐shore islands. This paper uses a case study of Qi'ao, Zhuhai, China to argue that such islands may function as enclaves within mainland societies rather than enclaves for mainland societies, rooted in a number of interrelated geographical imaginaries. These imaginaries consolidate Qi'ao's present identity as an urban enclave against industrialisation and the collective intuition of historical discontinuity. It is also argued that, despite its many utilitarian benefits, the model of enclavising small, near‐shore islands for tourism begs an ethical question: for whom do these islands serve as enclaves? In response, I call for a new theorisation of small, near‐shore island relationality that considers some islands' roles within, rather than simply external to, mainland societies. [ABSTRACT FROM AUTHOR]

This paper argues that rising food staple prices can pose a significant barrier to the growth of labour‐intensive manufacturing by raising real wage rates. This is important because an expanding manufacturing sector has both comparative static and dynamic effects on labour productivity growth. The experience of Indonesia is used to illustrate these ideas. [ABSTRACT FROM AUTHOR]

This paper uses the lens of institutional theory to explain the launch and evolution of Austin, Texas's technology‐based economy. The case underscores the importance of context, contingency, and the evolution of key local development organizations in explaining how regional economic development trajectories can change and evolve. The case history provides insights into how economic development networks form and operate to "set off" processes of industrial specialization and agglomeration and how they can promote successful adaptation to change in technology and industrial structure. The Austin story further suggests a "stage" process of regional technology‐based evolution where the development of industrial agglomerations linked to a substantial local research base is seen as a necessary precursor to increasing endogenous innovation and start‐up activity. Successfully navigating these stages is bolstered by the formation of institutions and networks that are durable, strategic, and adaptive, and which, at the right time, recognize and support entrepreneurial firm development to help sustain technology‐based growth. [ABSTRACT FROM AUTHOR]

Since the early 2000s, the 'race to the bottom' that typified the 'China price' and the model of export-oriented industrialization has been challenged by various factors, triggering another round of industrial restructuring and producing new economic geographies of production and employment in China. This paper provides a review of existing research on the new economic geographies of China's manufacturing industries. In doing so, we seek to show how critical engagements with China may help us 'theorize back' at the dominant discourses and theories in economic geography (e.g., global value chain, global production network, new regionalism, spatial fix, and labor agency theories). Specifically, this paper focuses on two strands of literature that have engaged critically with China and sought to remake the economic geography through new insights from China-one on China's new geographical and industrial dynamics and the other on the issue of labor agency and labor regime in China. We argue that the sheer pace and rapidity of regional dynamics in China provide a fertile ground for new conceptual development, methodological innovation, and empirical insights. [ABSTRACT FROM AUTHOR]

In the time of post‐industrialism, the increasing costs of life, scientific and technical development, an increase in the level of education and ecological barriers resulted in the decentralization of economic activity. One of the consequences of this is an increase in the locational attractiveness of the suburban zone. The aim of the paper is to evaluate the contemporary processes concerning location and concentration of industry in a post‐socialist city illustrated with an example of the city of Wrocław. The conducted research enabled us to determine the functional specialisation of gminas (municipalities), which served as the basis for the construction of a simplified model of the suburban zone in the post‐industrial period. In order to diagnose the extent of development and the level of spatial differentiation of the process of industrial activity concentration, the authors applied a location quotient (LQ) as well as a taxonomic method of linear ordering of distances from so‐called development pattern. [ABSTRACT FROM AUTHOR]

A focus on high‐tech industries has neglected the potential of low‐tech industries in regional economic policy. This paper critically assesses the application of the concept of the regional innovation system (RIS) by exploring the processes through which government policy and inter‐actor collaboration facilitate low‐tech industrial growth and development. In doing so, we conduct a qualitative case study on the batik industry in Pekalongan, the largest batik‐producing city in Indonesia. The results show that national and local government policy frameworks have played a major role in facilitating formal and informal collaboration between research and education institutions and the batik industry in Pekalongan. These collaborations contribute to creating research and learning environments that are important conditions for local innovation and development. [ABSTRACT FROM AUTHOR]

This paper examines the influences of Malaysia's Federation Land Development Authority (FELDA) scheme in fostering inclusive rural development. Based on the model of holistic inclusive development, the paper investigates the performance of FELDA from four perspectives: social development, industrialisation, modernisation and basic needs. The main findings of the study indicate that, to a large extent, the scheme has successfully stimulated both the social and economic development of the community. Nonetheless, establishing a strong trust, social cohesion and rapport between the public authorities and community remain the main challenges in determining the success of this state-led agenda. Moreover, keeping traditional values in the modern system will be the key principle for the sustainability of the programme if plans are made to adopt the scheme in other regions. [ABSTRACT FROM AUTHOR]

Processes of globalisation in the conventional food provision system have had widespread negative impacts on small-scale farmers. Yet, alternative food networks, which are characterised by more sustainable production/consumption practices and fairer trade relations, have increasingly been 'going global' and, in the process, have been integrating small-scale farms in the South. One such high-value export-led commodity is certified organic shrimp. International third-party certification schemes are becoming popular as a tool to verify the intangible attributes of such commodities. Using concepts of multifunctionality and agrarian change, this paper examines the implications of introducing an international environmental certification programme to a site where the 'peasantry' has been preserved and has limited integration in the global agro-food system. Drawing on a case study that examines the first certified organic shrimp production project in Vietnam, this paper concludes that the current movement towards post-productivism in the global North has potential to keep local farming practices in the global South by justifying the value of peasant-like production methods through international certification. As a result, the development path of agrarian transition might be reshaped into a form not necessarily pursuing industrialisation. This leads to the new interpretation of pre- and post-productivism beyond the North and South divide. [ABSTRACT FROM AUTHOR]

This is a paper of two parts. The first suggests a number of questions concerning agrarian change in capitalism, grouped by their concern with social forces and dynamics internal to the countryside, rural-urban interconnections internal to the 'national', the contributions of agriculture to industrialization likewise within the 'national' and those 'external' determinants grounded in capitalist world economy. The second part draws on the papers in this special issue by Chinese scholars, to argue the continuing relevance of questions about commodification, differentiation and accumulation from below and from above, in agrarian change in China today. [ABSTRACT FROM AUTHOR]

This paper introduces convergent innovation (CI) as a form of meta-innovation-an innovation in the way we innovate. CI integrates human and economic development outcomes, through behavioral and ecosystem transformation at scale, for sustainable prosperity and affordable universal health care within a whole-of-society paradigm. To this end, CI combines technological and social innovation (including organizational, social process, financial, and institutional), with a special focus on the most underserved populations. CI takes a modular approach that convenes around roadmaps for real world change-a portfolio of loosely coupled complementary partners from the business community, civil society, and the public sector. Roadmaps serve as collaborative platforms for focused, achievable, and time-bound projects to provide scalable, sustainable, and resilient solutions to complex challenges, with benefits both to participating partners and to society. In this paper, we first briefly review the literature on technological innovation that sets the foundations of CI and motivates its feasibility. We then describe CI, its building blocks, and enabling conditions for deployment and scaling up, illustrating its operational forms through examples of existing CI-sensitive innovation. [ABSTRACT FROM AUTHOR]

ABSTRACT This paper aims to provide empirical evidence on the extent and possible channels of tax competition among provincial governments in China. Using a panel of provincial-level data for 1993-2007, we find strong evidence of strategic tax interaction among provincial governments. Tax policy is approximated by average effective tax rates on foreign investment, taking into account the tax incentives available to foreign investors. In line with the predictions of the theoretical tax competition literature, we also highlight the impact of each province's characteristics (including its size and level of industrialization) on the strategic interaction with its neighbors. Finally, the paper explicitly identifies the establishment of development zones as an important conduit for tax competition among provinces. [ABSTRACT FROM AUTHOR]

Like much of the industrialised world, Australia's population is ageing, the implications of which are twofold: increasing demand for publicly funded services and a decline in the supply of prime working-age people. In grappling with the challenges of a diminishing workforce, the Australian Government is currently relying on its migration programs to provide both the much-needed labour and skills for the resource boom and also to stimulate the economy through population growth. However, there may be another, not yet fully considered solution to the upcoming demographic problem. This paper investigates how the grandchildren of the baby boomers, termed here the Thank God You're Here generation (Gen TGYH), might impact on Australia's predicted workforce shortage. This generation of workers will enter the labour force as the last of the baby boomers reach retirement age, and will not only be bigger in size than preceding generations (Y, X and Baby Boomers), but also potentially be better educated than the retiring generation. This paper will also canvas the opportunities for both Gen TGYH and employers as well as the challenges for policymakers and governments in maximising the opportunity provided by this generation in the Australian economy. [ABSTRACT FROM AUTHOR]

Abstract: High‐resolution RGB organic light‐emitting diode frontplane is a key enabler for direct‐view transparent augmented reality displays. In this paper, we demonstrate 1250 ppi passive displays and semi‐transparent active displays. Organic light‐emitting diode photolithography can provide pixel density above 1000 ppi while keeping effective emission area high because of high aperture ratio. Patterns with 2 μm line pitch were successfully transferred to emission layers, indicating possible further pixel density scaling. Lifetime after patterning, key parameter enabling industrialization, is above 150 h (T90 at 1000 nit). [ABSTRACT FROM AUTHOR]

Abstract: Maritime industrial development areas (MIDAs) are spatial tools designed to accelerate economic growth in backwards coastal areas and thus alleviate regional disparities, and they have widely expanded in both developed and developing countries over the past sixty years. This paper reviews the global development of MIDAs in different historical periods and compares them with cases on China's Liaoning coast in terms of their structure, location, administration, national political‐economic climate and theoretical justification. The results indicate that although those countries have different institutional environments they seemingly once took the same path in their specific stages of development. However, the experiences of developed countries and other developing ones and the current dilemma of MIDAs in coastal Liaoning together demonstrate that MIDAs cannot achieve the policy targets anticipated by decision makers, especially during the economic transitions of China. This finding cautions backwards countries and their lagging areas, such as northeastern China, that the traditional pattern tried by the first developed countries may not be appropriate when the development tool (e.g., MIDAs) is examined in both the framework of international comparison and the socioeconomic setting of a specific country. [ABSTRACT FROM AUTHOR]

The electricity demand in South Africa has experienced vast changes both from a policy point of view and due to the country's great industrialisation and urbanisation. The literature dealing with the South African electricity case, to date, has not taken into account these changes and their effect to the symmetric behaviour of the residential and industrial electricity consumers. Hence, this paper aims at examining the asymmetric behaviour of the annual South African electricity demand (total, residential and non-residential) for the period 1960-2012. To do so, three different tests were used: the entropy test proposed by Racine and Maasoumi (2007. Journal of Econometrics 138, 2, 547; 2008. Econometric Reviews 28, 246), the conditional symmetry test proposed by Bai and Ng (2001. Journal of Econometrics 103, 225) and the Triples test proposed by Randles et al. (1980. Journal of the American Statistical Association 75, 168). The findings showed that there is weak evidence of asymmetry, given that the null hypothesis of symmetry can only be rejected at 10 per cent level of significance. Hence, econometric models examining the South African electricity demand during the same period are credible in their assumption of a linear data generating process. [ABSTRACT FROM AUTHOR]

Creative destruction is a key driving force behind industrial development. The continuing process of creative destruction provides an impetus to regional industrial renewal. Our analytical framework emphasizes the ways in which firm exit creates a stimulus for firm entry is complementary to the process of technological change and industrial renewal articulated by Schumpeter who pays attention to how new entrants bring in radical innovation and new products, making incumbents' products and technologies obsolete and forcing them to exit or catch up. Using firm-level data of China's industries during 1998-2008, this paper seeks to argue that the relationship between firm exit and entry has been constantly shaped by an assemblage of various factors, including not only firm characteristics, but also industrial linkages, and most importantly, national and regional institutional contexts, particularly in the context of China where a triple process of decentralization, globalization, and privatization has resulted in enormous spatial and temporal variations in the economic and institutional landscape. [ABSTRACT FROM AUTHOR]

In contrast to Western Europe's well-documented contribution to global industrialization, Eastern Europe has not received adequate attention. This paper addresses this asymmetry by defining a secure socio-technical framework for the development of metallurgical technology in one of the most important mineralized zones in Eastern Europe, namely the uplands of north-eastern Greece. The interplay of technological innovation, geography and social process has made this region central in European political history from the Classical and Roman periods up to recent times. Metal procurement has been crucial particularly between the 15th and 19th centuries ad, when armed conflicts escalated across the Balkans and the high inflation throughout Europe increased the demand for raw materials from the East. Field data from north-eastern Greece and instrumental analysis corroborate the concept of iron extraction during this period from complex ores that were potentially used for their precious metals contents as well. Chemical analysis of slag points to iron bloomery processes, while analysis of respective residues (speiss) reveals significant concentrations of silver and thus testifies to the extraction of precious metals. This study addresses concerns that preoccupy political and technological minds today, and provides a context for understanding the effects of changing attitudes to the environment, social development, consumption and natural resources. [ABSTRACT FROM AUTHOR]

This is a contribution to a long-standing 'conversation' between Henry Bernstein and Terry Byres on capitalist agrarian transition, encompassing the development of capitalist agriculture and capitalist industrialization. Two themes are central: first, the divergence of view with respect to the possible relevance of past transitions for the present (posited by Byres) and the contemporary, pre-emptive power of globalization (argued by Bernstein); and, second, the basic difference of analytical procedure. There is discussion of how, in India, before 1947, colonialism sought unsuccessfully to replicate an 'English model' of transition in eastern India; and how, throughout India, colonialism through surplus appropriation and remittances to Britain prevented the creation of the underlying structural conditions necessary for successful agrarian transition. Aspects of the nature of the Byres treatment of the Scottish experience of agrarian transition in the eighteenth century are considered, to illustrate the nature of the Byres method. The paper seeks to advance the conversation by clarifying the contrast between the two approaches. [ABSTRACT FROM AUTHOR]

Discussions of animal rights tend to naturalize rights discourse, while discussions of animal philosophy tend to naturalize self/other relationships. This paper argues that neither provide an adequate critique of the system of capitalism that shapes both. As ever-larger portions of the globe are subject to intensified capitalist exploitation and industrialization, labor becomes increasingly superfluous to the processes of production, leaving millions of human beings to live like animals outside of the space of production even as billions of animals are increasingly granted some measure of rights due to their place within production. Both the desire to define our relationship to other animals in the discourse of animal rights and the tendency to naturalize exploitation, sacrifice and sovereignty in poststructural philosophy are two sides of the same capitalist coin. Finally, this paper suggests that addressing the problems of dehumanization and the waste of human lives might require forming new ideas and new practices regarding our relationships with other animals. [ABSTRACT FROM AUTHOR]

The Millennium Development Goals (MDGs) are a set of international development targets agreed to by members of the United Nations in 2000. The goals aim to improve many of the dimensions of extreme poverty and are to be achieved by 2015. This paper provides an overview of the issues relevant to the achievement of the MDGs in the Asia-Pacific region. The paper begins by discussing the critiques of the MDGs before assessing whether countries in the region are on track to achieve them. Issues relating to data availability and accuracy are discussed and the need to tailor the MDG targets to the special circumstances of some Asia-Pacific countries is examined. The paper proceeds by discussing the role of international assistance via international foreign development aid and non-governmental organisations in the achievement of the MDGs. The paper concludes with some policy implications for the international donor community. [ABSTRACT FROM AUTHOR]