Search

The human nasal cavity develops from birth with size anatomical changes. This study aims to evaluate the flow parameters and particle deposition parameters. Neonatal and infant nasal cavities are developed using MIMICS 21.0, and the flow is evaluated by ANSYS 2021 R2 using CFD to evaluate velocity, pressure, micro- and nanoparticle depositions under sedentary breathing conditions. Neonatal nasal valve velocity was recorded 3.5 times higher compared to the infant for 1.8 LPM and 2.7 times for 3 LPM. Neonatal vestibular depositions up to 10 µm were 6.6%, which increased to 76% for 60 µm for 1.8 LPM and increased to 21.3% for 10 µm and 79% for 60 µm for 1.8 LPM. The neonatal nasal valve showed maximum depositions of around 35% for 20 µm for both flow rates. Maximum depositions of nanoparticles are in the mid-nasal region. Infant nasal cavities deposit around 1% to 2% for nanoparticles below 20 nm for both flow rates. Neonatal overall microparticle depositions doubled with an increase in flow rate up to 10 µm. The overall deposition efficiency of nanoparticles increases 1.5 times with increasing flow rate. This study will help with the medical administration of aerosol-based medications in the patient and age-specific nasal cavity. [ABSTRACT FROM AUTHOR]

Objective: The nasal cavity effectively captures the particles present in inhaled air, thereby preventing harmful and toxic pollutants from reaching the lungs. This filtering ability of the nasal cavity can be effectively utilized for targeted nasal drug delivery applications. This study aims to understand the particle deposition patterns in three age groups: neonate, infant, and adult. Materials and methods: The CT scans are built using MIMICS 21.0, followed by CATIA V6 to generate a patient-specific airway model. Fluid flow is simulated using ANSYS FLUENT 2021 R2. Spherical monodisperse microparticles ranging from 2 to 60 µm and a density of 1100 kg/m3 are simulated at steady-state and sedentary inspiration conditions. Results: The highest nasal valve depositions for the neonate are 25% for 20 µm, for infants, 10% for 50 µm, 15% for adults, and 15% for 15 µm. At mid nasal region, deposition of 15% for 20 µm is observed for infant and 8% for neonate and adult nasal cavities at a particle size of 10 and 20 µm, respectively. The highest particle deposition at the olfactory region is about 2.7% for the adult nasal cavity for 20 µm, and it is <1% for neonate and infant nasal cavities. Discussion and conclusions: The study of preferred nasal depositions during natural sedentary breathing conditions is utilized to determine the size that allows medication particles to be targeted to specific nose regions. [ABSTRACT FROM AUTHOR]

The airflow behaviour and particle deposition before and after the maxillary expansion are evaluated using the computational fluid dynamics method. A pediatric patient was subjected to maxillary expansion and the CT scans of pre and post were recorded. The procured CT scans were developed into 3D models using Materialise MIMICS 21.0 (Materialise, Ann Arbor, MI). The analysis was performed using ANSYS FLUENT 2020 R2 with three different flow rates defined at the nostril inlet as 5, 10, and 15 LPM. The surface area and nasal volume increased by 5.1% and 16.5%, respectively, for the post-maxillary expansion case. The velocity profiles show a maximum value at the nasal valve regions followed by a decreased velocity in the mid-nasal region with an 85% lower velocity observed at the nasal valve for the post-maxillary expansion case. The nasal resistance and pressure drop decrease by 46% to 66% in post-maxillary expansion cases. The maximum WSS at the nasal valve region is observed which is reduced by around 47% for postmaxillary expansion cases. Particle deposition studies show a reduction in particle depositions in post cases indicating a greater number of inhaled particles reaching the lungs. The pressure drop and the nasal resistance values were reduced by more than 50% for post-maxillary expansion. The particle deposition studies show increased depositions at higher flow rates for both cases. [ABSTRACT FROM AUTHOR]

Copyright of Journal of Natural Fibers is the property of Taylor & Francis Ltd and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

The total hip prosthesis is considered one of the greatest advancements in orthopaedic surgery in the early 20th century. In hip implant replacement, the stem is inserted into the femur and femoral head, acetabular cup, and backing cup over the stem. This felicitates the normal range of motion and stability of an individual compared to the natural hip joint. Several different types of biomaterials are used in the total hip prosthesis. Where the combination of UHMWPE, CoCrMo alloy, and Ti-6Al-4 V alloy is widely used due to their superior mechanical properties over the others. In this work, these material combinations are used for the analysis with changes in the femoral head sizes from 24 mm to 48 mm to know the best size with the better material combination. Static structural analyses are carried out using Ansys R-19. Two sets of analyses are performed for two different material combinations between Ti6Al-4 V, CoCr, and UHMWPE. The circular cross-shaped stem with change in femoral head sizes from 24 mm to 48 mm is used for analysis. The acetabular cup and backing cup thickness are kept constant throughout the study. The size of the acetabular cup and backing cup is considered 6 mm and 4 mm respectively. Loading and boundary conditions are considered as per the ASTM standards. Hip implant with Ti-6Al-4 V for stem and a 4 mm backing cup of CoCr and 6 mm acetabular cup of UHMWPE shown the least stress value of 203.48 MPa over all the other models which are used in the analysis. This work shows the analysis to know the effect of the change in femoral head size and also the change in material combinations used in hip implants. Further experimental work can be carried out to validate the results obtained in the current work. [ABSTRACT FROM AUTHOR]

In replacement surgery of the hip joint, an implant is replaced into the natural femur which recreates the articulation and functionally of a natural joint. Total hip replacement is significantly increasing by the day worldwide and is likely to increase by 174% by 2030. Primary revision is another major concern for total hip replacement with revision rates likely to increase by 137%. The first part of the article states the basic anatomy of the hip joint, different ligaments in the hip, the disorders associated with the joint, and evaluation of total hip arthroplasty. In the second part some of the major works are highlighted followed by a detailed discussion about different design considerations and wear-related issues in hip joints. More emphasis is given to the tribological behavior of implants under different conditions. The design aspects and several parameters which affect the wear rate in implants are summarized. Also, different testing methods which are used both in experimental and numerical techniques are reported to estimate the wear rates in hip implants with the evolution of hip implants since the early 20th century, in terms of different designs, materials and wear hip implant arthroplasty is known as one of the best advancements in healthcare. Further research is needed to establish to improve the life expectancy of hip implants. [ABSTRACT FROM AUTHOR]

The Li-ion batteries used in electric vehicles widely employ cooling plates with mini channels for thermal management purpose. Researches on battery thermal management systems of electric vehicles are largely focused on improving the cooling efficiency hence obtaining temperature uniformity across the cells. In the present work, a streamline configuration has been incorporated in cooling plate design to enhance the performance of mini-channel cooling plate. These kinds of configurations are usually found in submarine and aerospace applications. By adopt- ing streamline design the flow resistance is found to reduce. Five plates with different number of channels (3, 4, 5, 6, 7) were computationally studied at a coolant (water and ethylene glycol mixture) flow rate of 0.002 kg/s. The maximum cell temperature is decreased by 7.8% for 7-channel configuration. Temperature uniformity is also found to improve using this design. The results reveal that this design is able to maintain the temperature of Li-ion battery in safe operating range. Hence this could be a better solution for thermal management of Li-ion batteries in future. [ABSTRACT FROM AUTHOR]

Copyright of Journal of Natural Fibers is the property of Taylor & Francis Ltd and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

The utilization of bio-mordants to make natural coloring process more eco-friendly is gaining worldwide fame, whereas the addition of microwave treatment has added value to the extraction of colorant under mild conditions. The Current study has been undertaken to isolate tannin from neem (Azadirachta indica) bark under the impact of microwave radiation for the dyeing of mordanted (chemical and bio) silk fabric. For this purpose, the extraction of colorant (tannin) has been carried out in various media and dyeing variables have been optimized. For making the process more sustainable and clean, extracts ofbio-mordants such as turmeric (Curcuma longa), henna (Lawsonia inermis), pomegranate (Punica granatum) and acacia (Acacia nilotica) have been employed at given conditions. It is found that microwave radiation for 2 min. to acidified methanolic extract of 2 pH obtained from 6 g powder has given good color strength in irradiated silk when it is used to dye at 75°C for 65 min. by employing 3 g/100 mL of Glauber's salt the as exhausting agent. It is concluded that microwave treatment has not only enhanced the extraction of tannin from neem bark but also improved the color characteristics under low conditions. [ABSTRACT FROM AUTHOR]

Copyright of Journal of Natural Fibers is the property of Taylor & Francis Ltd and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Copyright of Journal of Natural Fibers is the property of Taylor & Francis Ltd and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Hip implants consist of a stem, femoral head, acetabular cup, and backing cup. There is a wide variety of sizes and lengths. Their adaptability is limited because of the inter-anatomical variations. There is no single fit-for-all implant design that satisfies the orthopedic requirement satisfactorily. In this work, the trapezoidal-shaped stem with three different cross-sections is considered. The femoral head size, acetabular cup thickness, backing cup thickness, and trunnion geometry were varied to arrive at the best possible combination. ANSYS R-19 was used to perform the static analysis. It is found that trapezoidal-shaped profile two has the least amount of stress and total deformation. The von Mises stresses were found to be higher when the femoral head size was between 32 mm to 40 mm in profile two. It was also observed that the femoral head with 24 mm has the least stress compared to higher head sizes. The maximum von Mises stress-induced in profile two was 141.0 MPa, the total deformation of 0.04436 mm and elastic strain of 7.6 × 10−4 mm/mm. Trunnion interface does not have a significant role with respect to the structural strength of the implant. From the findings of this study, it is inferred that profile two shaped stems with the femoral ball size of 36 mm, acetabular cup thickness of 2 mm and backing cup thickness of 1mm is best suited for the hip replacement. The major outcome of this study is the utilization of the DoE method to determine the optimized value of the implant. [ABSTRACT FROM AUTHOR]

Copyright of Journal of Natural Fibers is the property of Taylor & Francis Ltd and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Natural products with therapeutic nature are nowadays warmly welcomed in textiles. Current study is concerned with isolation of tannin from neem bark (Azadirachta indica) and its application onto silk fabric. For improvement in shades, chemical & bio-mordants have been employed at optimal dyeing conditions. It is found that methanolic extract of pH 5 obtained 8 g dye powder after US Treatment for 30 min has given high color strength if used to dye irradiated silk for 65 min at 75 °C. Bio-mordanting using herbal plants has improved the color characteristics as compared to chemical mordants used. ISO standards for color fastness reveal that herbal based bio-mordants have improved the rating from good to excellent as compared to chemical mordants used. It is concluded that US treatment has not only isolate the colorant for neem bark under mild condition but also given excellent characteristic using bio mordants onto silk fabrics. [ABSTRACT FROM AUTHOR]

AbstractFace cups form a vital component of breathing, assisting with devices that aid in artificial breathing for neonates. This study aims to evaluate the flow parameters in the nasal cavity for two different types of face cups. The neonatal nasal cavity model was developed from CT scans using MIMICS 21.0. Two face cups, one hemispherical and the other anatomical shaped cups are developed around the nasal cavity and the airflow is simulated using ANSYS 2021 R2. Results are compared with a nasal-only model. At the nasal valve region, the highest velocity is seen for the nasal-only model which is 16.3% higher than that of the hemispherical face cup and 15.2% superior to the anatomical-shaped face cup. In addition, the decrease in pressure across the nasal-only model is 7.4 and 6.6% below that of the hemispherical cup and anatomical cup masks. The nasal resistance values across the nasal cavity are the lowest for the nasal-only model, 7.7 and 6.7% lower respectively than the hemispherical and anatomical-shaped cups. There were very minor changes in the flow parameters such as velocity, pressure and wall shear stress when comparing the hemispherical and anatomic-shaped masks for the airflow inside the nasal cavity. [ABSTRACT FROM AUTHOR]