Search

In this work, we demonstrated a novel approach of corrosion protection based on the fabrication of polyelectrolyte/SiO2 nanoparticles multilayers on magnesium alloys. The original multilayers based merely on electrostatic attraction showed porous morphology and weak anti-corrosion protection for the Mg substrate. However, the heat-treatment process would change the microstructures of the multilayers through the cross-linking between the polyelectrolytes and the capping agents of the nanoparticles, and the barrier effects of the coating could be confirmed by polarization and electrochemical impedance spectroscopy. Thus the heat treatment would be an applicable option for preparing the layer-by-layer assembled anti-corrosive multilayers on biomedical Mg alloys.

A hydrothermal deposition method was utilized to fabricate Ca-P composite coating induced by the layer-by-layer (LbL) assembled polyvinylpyrrolidone/deoxyribonucleic acid (PVP/DNA)20 multilayer on AZ31 alloy. The surface morphology and compositions were characterized by SEM, EDS, FTIR and XRD. Besides, the corrosion resistance and degradation behavior of the coating were tested via electrochemical polarization, impedance spectroscopy and immersion measurements. Results show that the main components of Ca-P coatings are hydroxyapatite, Ca3(PO4)2 and Mg3(PO4)2·nH2O. The LbL-assembled DNA and PVP promote the adsorption of Ca-P deposits on the sample surface, and structures and functional groups of the polyelectrolyte in the outermost layer are the primary influencing factor for the induction of the Ca-P coating. Carboxyl groups have the best biomineralization effect among all related functional groups. The enhanced corrosion resistance and adhesion highlight a promising use of (PVP/DNA)20-induced Ca-P coatings in the field of biomedical magnesium alloys.

Magnesium (Mg) and its alloys are considered as ideal biodegradable materials due to their excellent mechanical properties and biocompatibility. In order to improve the surface properties to allow better adaptation to the surrounding tissue of the body, surface modification has played a significant role in satisfying multiple clinical requirements such as corrosion resistance, biocompatibility, and antibacterial ability. Here, layer-by-layer (LbL) self-assembly, which can be applied for biodegradable Mg alloys due to its extensive choice of usable units, holds great promise among all the surface techniques. In this review, the mechanisms of the driving force (i.e., electrostatic interaction, hydrogen bonding, charge transfer interaction and covalent bonding), cutting-edge advances in preparation methods (e.g., dipping, spraying, and spinning) and the functional properties (corrosion resistance, antibacterial activity, and biocompatibility) that could be achieved by the LbL coatings are summarized. A reasonable trend of the potential development of LbL for bio-Mg alloys is also proposed at the end of this article.

Magnesium (Mg) alloys as a bioabsorbable light metal have shown great clinical potential as bone replacement implants. In this review, the categories, progress in cutting-edge preparation technologies and antibacterial mechanisms of Mg alloys and considerable numbers of corrosion-resistant and functional coatings are summarized. The relationship among the microstructure (grain size, intermetallic compounds), biocorrosion resistance and biocompatibility for antibacterial Mg alloys is discussed. The challenge and outlooks of biomedical Mg alloys and coatings are proposed from an antibacterial perspective.

Influence of glucose on corrosion of biomedical Mg-1.35Ca alloy was made using hydrogen evolution, pH and electrochemical polarization in isotonic saline solution. The corrosion morphologies, compositions and structures were probed by virtue of SEM, EDS, FTIR, XRD and XPS. Results indicate that the glucose accelerated the corrosion of the alloy. The elemental Ca has no visible effect on the corrosion mechanism of glucose for the Mg-1.35Ca alloy in comparison with pure Mg. In addition, the presence of CO2 has beneficial effect against corrosion due to the formation of a layer of carbonatecontaining products.

Mg-Li based alloys hold much attention as potential biomedical materials due to their excellent ductility. A reduced mechanical strength and concern for biocompatibility are exhibited for Mg-Li binary alloys due to the presence of Li element. Addition of the Ca element into Mg-Li alloys leads to an improvement in mechanical strength and biocompatibility. In the present work, the microstructure, mechanical property and corrosion behaviors of three kinds ( α , α + β , β ) of as-extruded Mg-Li (1, 9 and 15 wt.%)-1Ca alloys were investigated using optical microscope, X-ray diffraction (XRD), tensile, immersion and electrochemical polarization measurements. In vitro biocompatibility was evaluated by cytotoxicity assays, hemolysis and four coagluation tests. The results indicated that the Mg-1Li-1Ca and Mg-15Li-1Ca alloys were characterized by α -Mg and β -Li phases besides Mg2Ca particles, respectively; while the Mg-9Li-1Ca by dual ( α -Mg+ β -Li) phase together with Mg2Ca phase. The Mg-1Li-1Ca alloy had the highest ultimate tensile strength (UTS) and yield strength (YS) and the lowest elongation (EL) to failure (10.1±1.24%) as well. The EL for the Mg-9Li-1Ca alloy was the highest (52.2±0.01%). The long-term immersion tests revealed a decrease in corrosion resistance with increasing Li content. The results of cytotoxicity assays clearly showed that the Mg-Li-Ca alloys demonstrated no toxicity to L-929 cells in 10% concentration of extracts. The Mg-1Li-1Ca alloy also exhibited an acceptable hemolysis ratio. The results of four coagulation tests designated no sign of thrombogenicity for the Mg-Li-Ca alloys except for the Mg-15Li-1Ca alloy.

A polymethyltrimethoxysilane (PMTMS)/hydroxyapatite (HA) hybrid coating was successfully fabricated on a magnesium alloy by hydrothermal treatment and immersion method. The microstructure and composition of the coating were characterized by using X-ray diffraction, Fourier transform infrared spectroscopy and scanning electron microscopy. The physical properties were investigated using scratch testing. At the same time, the corrosion resistance was evaluated via electrochemical and immersion tests. The results demonstrated that the corrosion resistance of the silane hybrid coating was significantly enhanced compared with the naked magnesium alloy. Especially, the corrosion current density of the PMTMS/HA magnesium alloy was three orders of magnitude lower than that of the bare material.

A superhydrophobic surface was successfully constructed to modify the layered double hydroxide (LDH) coatings on aluminum alloy using stearic acid. The characteristics of the coatings were investigated using SEM, XRD, FT-IR and XPS. The corrosion resistance of the prepared coatings was studied using potentiodynamic polarization and electrochemical impedance spectrum. The results revealed that the superhydrophobic surface considerably improved the corrosion-resistant performance of the LDH coatings on the aluminum alloy substrate. The formation mechanism of the superhydrophobic surface was proposed.