Search

Background The bleach-boosting capability of xylanases is well-known. The use of xylanase pre-treatment before the application of chemical bleach has multiple advantages including (i) lesser use of polluting chemicals of the traditional bleaching process; (ii) less damage to the cellulosic fbers, therefore better recyclability; and (iii) better brightness of chemical bleach. The major impediment in the application is the availability of commercial enzymes that are active at the elevated temperature and pH that exist during the industrial pulping process. In the present paper, xylanase having suitability for application in deinking is reported. Results The xylanase used showed high deinking potential. Optimal deinking was obtained at the xylanase dosing of 20U/g of the dried pulp at 60°C for a treatment time of 1h. It could bring about a 50% reduction in the usage of chemical bleach that was applied after xylanase pre-treatment. The comparison of FTIR spectra showed changes in intensity without signifcant changes in the functional group signatures implying that there is negligible damage to the fber strength in the xylanase pre-treatment process as compared to the chemical bleach process. Conclusion The xylanase used in this study was efective in deinking paper pulp and can be used for bio-bleaching of recycled paper. [ABSTRACT FROM AUTHOR]

The pulp and paper industry is critical to global industrial and economic development. Recently, India's pulp and paper industries have been facing severe competitive challenges. The challenges have impaired the environmental performance and resulted in the closure of several operations. Assessment and prediction of the performance of the Indian pulp and paper industry using various parameters is a critical task for researchers. This study proposes a framework for performance assessment and prediction based on Data Envelopment Analysis (DEA), Artificial Neural Networks, and Deep Learning (DL) to assist industry administration and decision-making. We presented a case study based on eight industries to demonstrate the methodology's applicability. This study analyses and predicts industry performance based on sample data observations over 30 years. The result suggests the DEA-DL-based efficiency prediction has an overall MSE of 0.08 compared with the actual efficiency. Furthermore, the efficiency rankings are compared between the three techniques. The results suggest that the integrated DEA-DL method is primarily accurate in most scenarios with the actual values. The findings of this study provide a comprehensive analysis of environmental performance for policymakers. [ABSTRACT FROM AUTHOR]

Traditionally, cellulose nanofiber (CNF) production has primarily relied on virgin cellulose sources. Yet, the shift to using paper mill sludge (PMS) as a source for CNF underscores the significance of reusing and recycling industrial byproducts. PMS contains significant amounts of cellulose that can be extracted as a raw material. The purpose of present study is to provide a sustainable approach to PMS utilization as a paper coating additive in the cellulose nanofibrils (CNFPMS) form via simply scalable wire-wound rod coating method. The effect of CNFPMS additive amounts at two coating layers on microstructure and surface properties of coatings such as porosity, air permeability surface roughness and optical properties such as brightness, gloss and CIE L*a*b* is studied, which they can also provide insight for the eventual print performance. Results indicated that the obtained CNFPMS in paper coating shows 52% decrease in porosity, presenting significant improvement in the coating microstructure. The marginal increase in permeability coefficient and surface roughness, 54% and 10%, respectively, suggests improving color reproduction and preventing color density losses. Optical analysis showed slight decrease in brightness and gloss, as was expected. Notably, the lightness was improved, which also indicates increasing color gamut volume in printing applications. As a result, the current work offers a sustainable approach to manage PMS for use in paper coatings as a high-value-added material. [ABSTRACT FROM AUTHOR]

In this paper, by a simple hydrothermal method vertically aligned ZnO nanorod arrays were grown on the carbon fiber paper (CFP) and then through a facile chemical bath deposition method CuO nanosheets were loaded on ZnO nanorod arrays, following by thermal spraying method, carboxylated carbon nanotubes (CCNTs) were successfully integrated with CuO/ZnO@CFP to form a binder-free CuO/ZnO-CCNT@CFP sensor. The sensor shows enhanced sensing activity for baicalein and luteolin determination due to the improved structural integration and synergism of different electrode material components. Remarkably, the CuO/ZnO-CCNT@CFP sensor showed good linear relationships over wide concentration ranges of 0.03–0.70 µM and 0.70–20 µM for baicalein and 0.03–0.45 µM and 0.45–8.5 µM for luteolin detection, with the detection limits of 1.7 nM for baicalein and 0.5 nM for luteolin, respectively. More importantly, the CuO/ZnO-CCNT@CFP sensor was utilized in the simultaneous determination of baicalein and luteolin, delivering linear ranges of 0.4–14 µM (baicalein) and 0.2–6 µM (luteolin) with the limit of detection of 0.05 µM and 0.03 µM, respectively. In addition, the developed CuO/ZnO-CCNT@CFP electrode was further investigated to detect baicalein and luteolin in traditional herbal medicine samples, showing satisfied results in comparison with analytic results from high performance liquid chromatography. [ABSTRACT FROM AUTHOR]

Plant-fibre ancient-books with cultural significance should be protected from moisture and pollution. In this work, a strategy of surface in-situ protection (building composite coating) was adopted to achieve good hydrophobicity, moisture-proofness and ink-contamination resistance at the surface of archaistic paper. By pre-ring opening of epoxy-based poly(vinyl silsesquioxane) (POSS) and spray of POSS/polyvinylidene fluoride (PVDF) mixed solution, in-situ construction of POSS/PVDF composite coating at the surface of ancient paper was achieved. Compared to water-absorbing ancient paper, POSS/PVDF co-modified ancient paper shows strong humidity resistance. The surface of co-modified ancient paper (epoxy-group pre-ring opening for 45 min) displays high hydrophobicity (water contact angle of ~142.6°), ascribed to greatly improved surface roughness of paper fibres as well as complete coverage of high-content Si/F elements on fibre surface. POSS-modified and neat ancient-paper materials show surface water contact angles of ~113.9° and 0°, respectively. Robust ink-resistance of POSS/PVDF co-modified ancient-paper surface is realized. The innovation in this work lies in perfect synergy of cage-shaped POSS and threadlike PVDF in coating. This work might open a way for surface nondestructive-protection to ancient-books for damp-proof, hydrophobic and anti-fouling characteristics. [ABSTRACT FROM AUTHOR]

Trimethylsilyl cellulose (TMSC) was employed as the coating matrix for the application of zinc oxide nanoparticles (ZnO) onto paper surfaces and the protections of ZnO/TMSC coating against UV-induced damages and fungal spoilage were evaluated. Filter papers were immersed in 2% w/v TMSC solution loaded with ZnO and air-dried. Three ZnO/TMSC suspensions were prepared with 0.1, 0.5, and 1% w/v ZnO NPs. The presences of ZnO/TMSC protective layers were confirmed with ATR-IR spectroscopy. The coated papers exhibited high surface hydrophobicities. After the coated papers were subject to 365-nm UV irradiation at 400 W for 3 h, the contact angles dramatically dropped. The trimethylsilyl (TMS) groups exposed on the surface formed a moisture barrier and were partially removed on UV exposure. ATR-IR revealed that more TMS groups were removed in the protective layer with no ZnO. UV-irradiated papers turned yellow and papers protected with 1% ZnO/TMSC exhibited significantly lower color changes than that of the uncoated one. Compared to the TMSC-coated paper, the addition of ZnO resulted in a significant reduction in tensile strength at maximum. However, after UV irradiation, significant increases in both the strain at break and strength at maximum were only observed in 1% ZnO/TMSC-protected papers. Regarding their anti-fungal properties, the 1% ZnO/TMSC films were effective in growth inhibitions of Aspergillus sp. and Penicillium sp. on the nonirradiated papers. Despite being hydrophilic after UV-irradiation, growths of the molds were severely suppressed on the UV-irradiated paper. [ABSTRACT FROM AUTHOR]

Persistence and misuse of antibiotics eventually give rise to the progression of resistance development in bacteria. Consequently, accurate, fast and cost-effective sensing devices are required to govern the presence of drugs. Herein, we design a microfluidic paper-based device (μPAD) for the detection of Rifampicin. We selected this analyte because of its persistent overuse for the treatment of tuberculosis, among the major causes of death around the world. In this work, we have integrated Fe-reinforced ZnS nanoparticles supported with rifampicin (RIF) imprinted material on the exterior of Whatman filter paper for the fabrication of paper-based microfluidic device (μPAD). In this fabricated μPAD colorimetric detection was performed, and the synergistic effect of Fe and ZnS was recorded as compared to individual nanomaterials. A distinct color indicator was used to quantify the concentration of the targeted substance by the naked eye. The fabricated paper-based sensor possessed high sensitivity for rifampicin detection, recorded linear calibration curve representing 0.1 µM LOD and excellent selectivity, in comparison to other inferring agents present in real samples. The practical application of this designed μPAD was validated by applying a real sample. [ABSTRACT FROM AUTHOR]

As China's demand for paper products increases, China's paper industry faces enormous pressure to reduce greenhouse gas emissions. By using material flow analysis in combination with input–output analysis, this study measured the waste paper recovery rate in a more accurate method and analyzed the impact of waste paper recycling on the carbon emissions from China's paper industry. China's waste paper recovery rate estimated in this study was close to 70% in 2017, much higher than that of 48% obtained with the traditional method. The regression results displayed a negative relationship between waste paper recovery rate and CO2 emissions per unit of paper consumption during 2000–2017 in China. The rolling regression results further indicated that the impact of waste paper recycling was becoming stronger on reducing CO2 emissions per unit of paper consumption in China. Since an inverted "U" shape relationship exists between waste paper recovery rate and its reduction effect on carbon emissions from the paper industry, the regression results suggested that China's waste paper recovery rate has not reached the optimal level with regard to carbon emissions from China's paper industry. Thus, although China's waste paper recovery rate has reached a relatively high level, currently waste paper recycling is still an effective method to reduce carbon emissions from China's paper industry. [ABSTRACT FROM AUTHOR]

Some ancient Chinese paper artifacts dyed with amur cork tree bark extracts are currently preserved to different extents in museums and libraries worldwide. As traditional natural plant dyes, the long-term performance of the amur cork tree bark extract-dyed handmade paper has been questioned under a preserved environment. The photodegradation process of the extract-dyed papers was examined under accelerating artificial UVA irradiation conditions according to China national standard-paper and board- accelerated aging (exposure to light). Changes during aging were analyzed by optical observation and scanning electron microscopy (SEM), X-ray diffraction (XRD), thermogravimetric analysis (TGA), Fourier transform infrared spectrometry (FTIR), pH, and tensile strength and folding endurance tests. The results showed that the main components from extracted dyes played an important role in affecting the photodegradation properties of dyed paper. The changes in surface color, pH, morphology and mechanical properties after the artificial UVA accelerated degradation tests revealed that a suitable concentration of the extract dyes for maintaining the long-term irradiation stability of the paper is important. [ABSTRACT FROM AUTHOR]

Highlights: m-BN/PNF nanocomposite paper with nacre-mimetic layered structures prepared via sol–gel film transformation approach presents excellent thermal conductivity, incredible electrical insulation, outstanding mechanical property and thermal stability. When the mass fraction of m-BN is 50 wt%, m-BN/PNF nanocomposite paper exhibits excellent thermal conductivity and electrical insulation. The λ∥ and λ⊥ are 9.68 and 0.84 W m−1 K−1, and the volume resistivity and breakdown strength are as high as 2.3 × 1015 Ω cm and 324.2 kV mm−1, respectively. The m-BN/PNF nanocomposite paper with 50 wt% m-BN also presents outstanding mechanical properties (tensile strength of 193.6 MPa) and thermal stability (thermal decomposition temperature of 640 °C). With the rapid development of 5G information technology, thermal conductivity/dissipation problems of highly integrated electronic devices and electrical equipment are becoming prominent. In this work, "high-temperature solid-phase & diazonium salt decomposition" method is carried out to prepare benzidine-functionalized boron nitride (m-BN). Subsequently, m-BN/poly(p-phenylene benzobisoxazole) nanofiber (PNF) nanocomposite paper with nacre-mimetic layered structures is prepared via sol–gel film transformation approach. The obtained m-BN/PNF nanocomposite paper with 50 wt% m-BN presents excellent thermal conductivity, incredible electrical insulation, outstanding mechanical properties and thermal stability, due to the construction of extensive hydrogen bonds and π–π interactions between m-BN and PNF, and stable nacre-mimetic layered structures. Its λ∥ and λ⊥ are 9.68 and 0.84 W m−1 K−1, and the volume resistivity and breakdown strength are as high as 2.3 × 1015 Ω cm and 324.2 kV mm−1, respectively. Besides, it also presents extremely high tensile strength of 193.6 MPa and thermal decomposition temperature of 640 °C, showing a broad application prospect in high-end thermal management fields such as electronic devices and electrical equipment. [ABSTRACT FROM AUTHOR]

Traditional papermaking was a significant innovation that intrigued the information-sharing society in a wide range of the globe. The importance of finding the historical background hidden behind the historical traditional paper is critical to understanding societies in history. Advanced molecular biological research is applied to many forensic studies to identify the origin and criminal events. Yet, biological research refrained from the heritage science of traditional papers due to its damage to the samples. The current study explores the Pearson correlation between DNA in traditional paper and non-destructive measurement of characteristics of traditional paper. DNA concentration and purity were found to have a proportional relationship based on the CIEL*a*b* color system. The color of the traditional paper was assessed assessment shows green and yellow rather than red and blue. The DNA concentration demonstrated a positive linear correlation with the peaks of 992 cm−1, 1599 cm−1, and 1628 to 1638 cm−1 region, which were lignin-specific functional groups. The presence of lignin in traditional paper defines the colors green and yellow, which is related to the presence of a cell wall. The quantity of cell walls present is linked to DNA survival during the traditional papermaking process. Furthermore, the partial least square (PLS) regression model is established. The prediction model based on DNA, paper properties, and smoothing + the second derivative preprocessed attenuated total reflection-Fourier-transform infrared (ATR-FTIR) spectral data demonstrated valid purity predictions. The evaluation parameter of the cross-validated prediction model contains a low Root Mean Square Error of Cross-Validation (RMSECV) of 0.091 for DNA purity. The determination coefficient was close to 1. However, the further establishment of a validated DNA extraction methodology is required for the consistency of the prediction model for DNA concentration. The hierarchical clustering analysis demonstrated the agglomerative dendrogram on traditional paper samples. For the dendrogram, the Nasu paper mulberry (originating in northern Japan) was distinguished from another paper mulberry (originating in southwestern Japan) by clustering. By multivariate statistical analysis, the DNA presence and quality were predictable from the Japanese traditional papers. In addition, the clustering analysis provided the possible origin of paper mulberry materials for traditional papers. Based on the preliminary information, the need for DNA analysis on historical traditional paper can be determined. [ABSTRACT FROM AUTHOR]

The economic development of a country directly depends upon industries. But this economic development should not be at the cost of our natural environment. A substantial amount of water is spent during paper production, creating water scarcity and generating wastewater. Therefore, the Pollution Control Board classifies this industry into red category. Water is used in different papermaking stages such as debarking, pulping or bleaching, washing, and finishing. The wastewater thus generated contains lignin and xenobiotic compounds such as resin acids, chlorinated lignin, phenols, furans, dioxins, chlorophenols, adsorbable organic halogens (AOX), extractable organic halogens (EOCs), polychlorinated biphenyls, plasticizers, and polychlorinated dibenzodioxins. Nowadays, several microorganisms are used in the detoxification of these hazardous effluents. Researchers have found that microbial degradation is the most promising treatment method to remove high biological oxygen demand (BOD) and chemical oxygen demand (COD) from wastewater. Microorganisms also remove AOX toxicity, chlorinated compounds, suspended solids, color, lignin, derivatives, etc. from the pulp and paper mill effluents. But in the current scenario, mill effluents are known to deteriorate the environment and therefore it is highly desirable to deploy advanced technologies for effluent treatment. This review summarizes the eco-friendly advanced treatment technologies for effluents generated from pulp and paper mills. [ABSTRACT FROM AUTHOR]

Soot stain from diverse sources is the most common stain that stains historical paper documents found in libraries, museums, and storage facilities. It is believed to be one of the types of deterioration that arises from the contact between stains and paper sheets. Therefore, in the present work, the effectiveness of the synthesized hybrid nanogel consisting of carbopol and nanoparticles (NPs) of ZnO, TiO2, or Fe3O4, in low and high-viscosity forms, for eliminating soot stains from historical paper manuscripts was conducted. The prepared hybrid nanogels were characterized utilizing the TEM, AFM, XRD, DLS, and Zeta Potential techniques. Following preparation, the soot-stained paper samples were heated to 105 °C for 6 days, a process known as accelerated thermal aging. Surface morphology, mechanical properties and the color change of the paper samples were investigated. The prepared hybrid nanogel had a spherical shape with well-defined edges and uniform size, with an average particle diameter ranging from 30 to 35 nm. There was no significant NPs agglomeration seen, suggesting uniform dispersion in the carbopol matrix. Additionally, the prepared gels' crystal structure and phase purity were revealed by the XRD analysis results. Paper fibers were visible in some parts of the treated sample with TiO2/carbopol hybrid nanogel at high-viscosity before aging. Cleaning soot-stained paper samples using high-viscosity Fe3O4/carbopol hybrid nanogel is more successful than using low-viscosity nanogel. the sample treated with high-viscosity ZnONPs/carbopol hybrid nanogel produced the highest total color differences (ΔE) (26.17). The paper sample treated with high-viscosity ZnO/carbopol hybrid nanogel exhibited the maximum tensile strength (61.8 N/mm2) and elongation at break (1.174%). The evaluation of the paper samples both before and after the cleaning process revealed that, the treatment with high-viscosity ZnO/carbopol hybrid nanogel gave the best results in removing soot stains from stained paper samples. [ABSTRACT FROM AUTHOR]

In this paper, three kinds of micro-nano bamboo powder (MBP) and alkyl ketene dimer (AKD) were added to the polyvinyl alcohol/cellulose nanofiber (PVA/CNF) coating to prepare PVA/CNF/MBP coated paper and PVA/CNF/M-MBP/AKD coated paper. The results showed that MBP improved the oleophobicity of PVA/CNF coating, and the grease resistance grade of PVA/CNF/B-MBP and PVA/CNF/M-MBP coated papers reached the highest level, with a kit number of 12. Among the PVA/CNF/MBP coated papers, the PVA/CNF/M-MBP coated paper has the best hydrophobic properties, with the water contact angle and Cobb value of 74° and 21.3 g/m2, respectively. In addition, when the AKD dosage was 0.2% in the PVA/CNF/M-MBP/AKD coating, the kit number of the coated paper was 11, the Cobb value was 15.2 g/m2, the water contact angle was 103°, and the tensile strength was found to increase slightly. Therefore, compared with PVA/CNF coated paper, PVA/CNF/M-MBP/AKD coated paper has good strength and excellent hydrophobic and oleophobic properties. [ABSTRACT FROM AUTHOR]

Paper recommendation with personalized methods helps researchers to track the latest academic trends and master cutting-edge academic trends efficiently. Meanwhile, the methods of previous paper recommendation suffer from three problems: data sparsity of content-based and collaborative filtering methods; Graph-based recommendations do not fully consider the personalized information of authors and their articles; Cold start based on deep learning. To overcome those difficulties, we propose a personalized paper recommendation method based on a knowledge graph and Transformer encoder (KGTE) with a self-attention mechanism. Firstly, we add auxiliary information (article title, publication year, citation times, and abstract) as attributes to the nodes of knowledge graph(KG), which contain author, digital object unique identifier(DOI) and keywords. Secondly, BERT is used to represent the semantic information features of the article and Transformer is introduced to fully integrate the feature context. After that, by using RippleNet, we traverse the knowledge graph, filter the user preference distribution and form a set of pre recommended nodes with multi_hop nodes. Finally, the prediction layer sorts the set and gets a Top_n paper recommendation. In the experiments on the DBLP and Aminer datasets, the precision value of KGTE improved by an average of 2.59% over the existing baseline methods DER and 4.23% improvement in NDCG. [ABSTRACT FROM AUTHOR]

Creatinine is one of the most important biomarkers to detect renal failures. The electrochemical detection of creatinine has been performed using complex enzymatic and non-enzymatic electrode arrays hindering their commercialization. In this work, a new and practical non-enzymatic electrochemical sensor was fabricated depositing copper on carbon paper electrodes by physical vapor deposition (namely Cu/CP). Surface and cross-sectional SEM images demonstrated the deposition of copper over the 3D structure of carbon paper. A thin film was found on the surface, while Cu nanowires with diameters of 180 ± 30 nm were found inside the 3D structure of CP. The thickness of the Cu film on the tubular structures of CP was of 390 ± 40 nm. High-resolution TEM images indicated that the Cu film was integrated by hierarchical structures containing terminal Cu hemispheres of 17.6 ± 2.2 nm. Additionally, interplanar distances from the selected-area electron diffraction pattern demonstrated the presence of Cu0, while Cu2O was also found. Creatinine concentrations in saliva between 16 and 400 µM indicate kidney failure. The Cu/CP electrochemical sensor detected creatinine with linear concentration ranges from 0 to 1000 µM with a r2 = 0.9936. Outstandingly, this sensor presented good reproducibility (RSD = 7.3%), and selectivity to detect creatinine in artificial saliva using interferents like urea, glucose, glycine, ascorbic and uric acids. [ABSTRACT FROM AUTHOR]

Background: Lignocellulosic biomasses produced from agriculture and forest-based industries are the cheapest or negative-cost biomass with a great potential for biotransformation to value-added bioproducts. Paper mill sludge, an important lignocellulosic biomass creates an environmental threat, which requires financial input for disposal. Thus, this study was aimed to isolate a novel bacterial strain capable of degrading cellulosic biomass including paper mill sludge to produce reducing sugar and other value-added bioproducts. Results: A novel bacterial strain Arthrobacter woluwensis TDS9 isolated from the soil was screened for its cellulolytic activity using carboxymethyl cellulose (CMC) as the sole carbon source. The incubation period, temperature, pH, carbon, and nitrogen sources are the most important factors ruling the CMCase and sugar productions of the strain A. woluwensis TDS9, and an alkaline pH (pH 8.0) led to enhanced sugar production up to 1100.09 μg/mL after 72 h of incubation at 25°C in a medium containing 1.5% CMC and 1.25% beef extract. The optimal conditions for maximum CMCase activity were defined, and the potassium ion boosted the CMCase activity up to 1.06 U/mL when the enzymatic reaction was performed for 30 min at 50°C and pH 8 using CMC as a substrate. Moreover, the strain A. woluwensis TDS9 produced 433.33 μg/mL reducing sugar from 1% pretreated paper mill sludge. Significant alterations in the structural arrangement of cellulosic fiber of paper mill sludge observed under microscope after each step of chemical treatment process helped for loosening the cellulose fibers and increased the saccharification for enzymatic hydrolysis. Endoglucanase IV (33 KDa) and beta-glucosidase II (53 KDa) were identified in crude enzyme based on the zymogram analysis and substrate specificity. Conclusions: The research has for the first time proved that this A. woluwensis TDS9 strain can efficiently convert cellulose. Therefore, the strain TDS9 could be a potential candidate for cellulase production in an industrial biotransformation process of paper mill sludge to produce reducing sugar. This sugar stream can be further used as a substrate to produce biofuels and other organic acids using another microorganism, which represents a greener alternative to add value to the paper production helping paper mill industries. [ABSTRACT FROM AUTHOR]

Paper and packaging materials a lignocellulose-based natural biodegradable polymer that spontaneously releases acetic acid, aldehydes, alcohol, and ester-based volatile organic compounds (VOCs) upon ageing and these VOCs start degrading the paper products and decline their mechanical strength properties. The reactivity of the paper of unbleached wheat straw pulp towards acetic acid and hexanal, which has been proven to have more degrading effects on paper than other VOCs, was considered in this work. The papers were exposed to these volatile compounds for 90 days in an air-tight vessel under ambient environmental conditions. The results showed that hexanal was more destructive than acetic acid with regards to cellulose degradation and depletion in the mechanical strength properties. The paper properties like, tensile, tear and burst index, viscosity, pH and carbonyl group content was measured. The growth of the carbonyl group, evidence of the ageing effects in the paper, detected more in the paper exposed to acetic acid. However, the strength of paper properties declined more with hexanal. FE-SEM analysis of the sample showed the development of pores and damage of cellulose fibre upon ageing. Similarly, the damaging effects of VOCs on cellulose, hemicelluloses and lignin were confirmed by significantly reduced peak detection through FT-IR \analysis. The high crystallinity index of the paper products due to exposure to VOCs was detected by XRD analysis, which confirmed the degradation of the low molecular weight cellulose molecule. Thus, the results are strongly recommended that VOCs that generates due to natural or artificial ageing could be the leading cause of paper degradation. [ABSTRACT FROM AUTHOR]

We report an innovative and facile approach to fabricating an ultrasensitive plasmonic paper substrate for surface-enhanced Raman spectroscopy (SERS). The approach exploits the self-assembling capability of poly(styrene-b-2-vinyl pyridine) block copolymers to form a thin film at the air-liquid interface within the single microdroplet scale for the first time and the subsequent in situ growth of silver nanoparticles (AgNPs). The concentration of the block copolymer was found to play an essential role in stabilizing the droplets during the mass transfer phase and formation of silver nanoparticles, thus influencing the SERS signals. SEM analysis of the morphology of the plasmonic paper substrates revealed the formation of spherical AgNPs evenly distributed across the surface of the formed copolymer film with a size distribution of 47.5 nm. The resultant enhancement factor was calculated to be 1.2 × 107, and the detection limit of rhodamine 6G was as low as 48.9 pM. The nanohybridized plasmonic paper was successfully applied to detect two emerging pollutants—sildenafil and flibanserin—with LODs as low as 1.48 nM and 3.45 nM, respectively. Thus, this study offers new prospects for designing an affordable and readily available, yet highly sensitive, paper-based SERS substrate with the potential for development as a lab-on-a-chip device. [ABSTRACT FROM AUTHOR]

Efficient removal of mold stains becomes an important research topic for paper conservation. In this study, a cleaning scheme based on the combination of bioenzymes and biosurfactants was explored. Morphological and molecular biology identifications were first jointly applied to identify the dominant strains sampled from five ancient books that are stored in the same environment. Cellulolytic experiments were then conducted to evaluate the cellulose degradation ability of the strains according to the cellulolytic digestive index. Finally, paper Mockups for the ancient books were constructed to investigate the most effective combination of bioenzymes and biosurfactants in removing mold stains as well as its effect on the paper's physical properties. The result concluded that the combination of 3% papain, 7% of sophorolipid or 7% of betaine, and distilled water, achieved optimal stain removal effect with over 50% cleaning rate at 35 °C, after 30 min of infiltration. The maximum color difference of the paper material after cleaning was around 0.60, pH was between 7.45 and 7.79, and no significant changes in tensile strength were observed. At the same time, Sophorolipid and Betaine both have superior deacidification, anti-acidification, anti-aging, and reinforcement capabilities, which can provide extra support to the fibrous structure in addition to cleaning the paper materials. The microbial contamination cleaning agent proposed in this study shows promising application prospects in conserving mold-contaminated paper artifacts. [ABSTRACT FROM AUTHOR]

This paper presents the case of an adjunct university professor to illustrate the dilemma of using artificial intelligence (AI) technology to grade student papers. The hypothetical case discusses the benefits of using a commercial AI service to grade student papers—including discretion, convenience, pedagogical merits of consistent feedback for students, and advances made in the field that yield high-quality work—all of which are achieved quickly. Arguments against using AI to grade student papers involve cost, privacy, legality, and ethics. The paper discusses career implications for faculty members in both situations and concludes with implications for researchers within the discourse on academic integrity. [ABSTRACT FROM AUTHOR]

In this research, we design and implement a small, convenient, and noninvasive paper-based microfluidic sweat sensor that can simultaneously detect multiple key biomarkers in human sweat. The origami structure of the chip includes colorimetric and electrochemical sensing regions. Different colorimetric sensing regions are modified with specific chromogenic reagents to selectively identify glucose, lactate, uric acid, and magnesium ions in sweat, as well as the pH value. The regions of electrochemical sensing detect cortisol in sweat by molecular imprinting. The entire chip is composed of hydrophilically and hydrophobically treated filter paper, and 3D microfluidic channels are constructed by using folding paper. The thread-based channels formed after the hydrophilic and hydrophobic modifications are used to control the rate of sweat flow, which in turn can be used to control the sequence of reactions in the differently developing colored regions to ensure that signals of the best color can be captured simultaneously by the colorimetric sensing regions. Finally, the results of on-body experiments verify the reliability of the proposed sweat sensor and its potential for the noninvasive identification of a variety of sweat biomarkers. [ABSTRACT FROM AUTHOR]

The valorization of paper mill sludge (PMS) is the main goal of this study. The emissions of PMS continue to increase at global scale, especially from packaging paper and board sectors. The raw sludge was used to prepare an adsorbent to remove toxic pollutants from wastewater, the methylene blue (MB), an organic dye. Firstly, the physico-chemical characterization of PMS was done determining the crystalline phases of PMS fibers, the content of main elements, and the pH zero point charge, which was determined at around pH 7. The adsorption of MB on PMS powder was studied at 18 °C with an agitation of 200 rpm, being the best operating conditions 30 min of contact time, 250 mg L−1 of initial MB concentration and 0.05 g in 25 mL of adsorbent dose. Experimental data of MB adsorption was fitted to Langmuir and Freundlich isotherm equations. The Langmuir model was more accurate for the equilibrium data of MB adsorption at pH 5.1. The PFOM and PSOM were adjusted to experimental adsorption kinetics data, being PSOM, which describes better the MB adsorption by PMS powder. This was confirmed by calculating the maximum adsorption capacity with PSOM, which was 42.7 mg g−1, being nearly similar of the experimental value of 43.5 mg g−1. The analysis of adsorption thermodynamics showed that the MB was adsorbed exothermically with a ΔH0 = − 20.78 kJ mol−1, and spontaneously with ΔG0 from − 0.99 to − 6.38 kJ mol−1 in the range of temperature from 291 to 363 K, respectively. These results confirm that the sludge from paper industry can be used as biosorbent with remarkable adsorption capacity and low cost for the treatment of wastewater. PMS can be applied in the future for the depollution of the effluents from the textile industry, which are highly charged with dyes. [ABSTRACT FROM AUTHOR]

Fly ash–lime–gypsum bricks are an environmentally friendly and energy-efficient alternative to burnt clay bricks. Nowadays, the scarcity of fly ash and lime adversely affects the production of fly ash bricks. To mitigate this, the current study examines incinerated paper mill sludge ash as a supplement to fly ash and lime. In the current study, in blend 1, coal fly ash is replaced by incinerated paper mill sludge ash (2.5–30 wt%), and in blend 2, lime is completely replaced by incinerated paper mill sludge ash (2.5–15 wt%). Based on Indian standards, bricks were tested for compressive strength, water absorption, weight density, percentage voids, efflorescence, drying shrinkage, dynamic modulus of elasticity, and impact energy. Before developing bricks, the materials have to be examined by X-ray diffraction, X-ray fluorescence, Fourier transform infrared spectroscopy, thermogravimetry differential thermal analysis, and scanning electron microscope techniques. Results from X-ray diffraction showed that higher replacement of incinerated paper mill sludge ash does not produce any phase transformation and merely improves porosity, which reduces weight. Higher replacement of incinerated paper mill sludge ash leads to a reduction in strength and a higher water requirement. The study found that incorporating incinerated paper mill sludge ash at replacement 2.5–15 wt% in blend 1 and 2.5–5 wt% in blend 2 satisfied the building brick requirements. By incorporating incinerated paper mill sludge ash into bricks, the brick industry can produce sustainable bricks that utilize resources effectively. Graphical abstract illustrating the reuse of incinerated paper mill sludge ash in the manufacturing of building bricks to minimize the demand for fly ash and lime. The visual shows the drawbacks of paper mill sludge in land dumping, the suggested methodology for reusing incinerated paper mill sludge ash to minimize environmental degradation, improved sustainability through waste utilization, its benefits, and the characterization of bricks. [ABSTRACT FROM AUTHOR]

A novel electrochemical sensor for paraquat determination was facilely developed using nanocomposites of cellulose incorporated with manganese oxide (MnO2@cellulose) modified screen-printed carbon electrode (SPCE). In this study, SPCE was fabricated on a low-cost poster paper, and nanocellulose from sugarcane bagasse was employed to enhance the electrode's surface area and improve the dispersion of MnO2. The MnO2@cellulose modified poster-SPCE exhibited a high electrochemical response toward paraquat. Various influencing factors, including differential pulse voltammetric parameters and accumulation time, were systematically explored. Under the optimal conditions, the cathodic peak current was linearly proportional to paraquat concentration in a range of 2 to 200 µM, featuring a low detection limit of 1 µM. The proposed sensor offers cost-effectiveness and can be readily prepared via a simple procedure. Moreover, this method exhibits excellent reproducibility, high selectivity, and a short analysis time. The portable electrochemical sensor was able to determine paraquat in water samples with acceptable recoveries from 95.45 to 109.20%, indicating that the sensor based on MnO2@cellulose/SPCE is reliable for paraquat quantification. [ABSTRACT FROM AUTHOR]

Bioenergy with carbon capture and storage (BECCS) is one of the key negative emission technologies (NETs). Large-scale implementation of BECCS has been criticized of the associated increase in land use. The existing large Nordic pulp and paper production units enable BECCS deployment without additional land use, as they currently release large amounts of bio-based carbon dioxide (CO2). The application of BECCS in pulp mills has been found technically feasible in earlier studies. This study explores key factors that affect the propensity to invest in BECCS in different types of existing European pulp and paper mills. The results give fresh understanding on the effects of BECCS on the market price of pulp and paper products and the required level of incentives. Based on statistical data, the marginal carbon dioxide credit (€ per ton CO2) to make BECCS profitable was derived. The results show that the required level of credit greatly depends on the mill type and details and that the feasibility of BECCS does not clearly correlate with the economic performance or the measured efficiency of the mill. The most promising mill type, a market kraft pulp mill, would find BECCS profitable with a credit in the range of 62–70 €/tCO2 and a credit of 80 €/tCO2 would decrease pulp production costs by 15 €/tproduct on average if 50% of CO2 emissions was captured. The EU Emission Trading System (ETS) is the main policy instrument to achieve the climate targets related to fossil energy use, but does not yet contemplate bio-based emissions. [ABSTRACT FROM AUTHOR]

To stimulate the development and application of formal methods in industry, we need to promote research and development for the improvement of formal methods and tools for industrial applications, and we need to exchange experiences of the industrial usage of these methods and tools. This special issue of Software Tools for Technology Transfer presents various tools and experience reports that are targeting the use of formal methods in industry. The papers in this special issue are extended versions of selected conference papers from the proceedings of the 27th International Conference on Formal Methods for Industrial Critical Systems (FMICS 2022). [ABSTRACT FROM AUTHOR]

The pulp and paper industry is an important contributor to global greenhouse gas emissions1,2. Country-specific strategies are essential for the industry to achieve net-zero emissions by 2050, given its vast heterogeneities across countries3,4. Here we develop a comprehensive bottom-up assessment of net greenhouse gas emissions of the domestic paper-related sectors for 30 major countries from 1961 to 2019—about 3.2% of global anthropogenic greenhouse gas emissions from the same period5—and explore mitigation strategies through 2,160 scenarios covering key factors. Our results show substantial differences across countries in terms of historical emissions evolution trends and structure. All countries can achieve net-zero emissions for their pulp and paper industry by 2050, with a single measure for most developed countries and several measures for most developing countries. Except for energy-efficiency improvement and energy-system decarbonization, tropical developing countries with abundant forest resources should give priority to sustainable forest management, whereas other developing countries should pay more attention to enhancing methane capture rate and reducing recycling. These insights are crucial for developing net-zero strategies tailored to each country and achieving net-zero emissions by 2050 for the pulp and paper industry.A bottom-up assessment of the net greenhouse gas emissions of the pulp and paper industries of 30 countries from 1961 to 2019 leads to country-specific strategies to achieve net zero by 2050. [ABSTRACT FROM AUTHOR]

The effective utilization for recycled carbon fibers (rCFs) is significant for less pollution, low energy consumption and resource conservation. This paper proposed a path for reprocessing the recycled carbon fibers into CF/PA6 fiber papers using flexible papermaking technology. Then, the CF/PA6 fiber paper could be used as an interlayer component to continuous CF woven/epoxy resin composites to form hybrid composites. The configurations of hybrid composites and directions of papers effects on notched impact resistance and flexural performance were systematically discussed. The micro energy absorption mechanism was revealed based on real-time crack tracking. The results indicate that cracks migration between woven and paper contributes to impact and flexural energy absorption, most improving 22.64% and 40.85% respectively in one-layer paper with longitudinal direction in the middle location (L1). Whereas, there is a negative effect of hybrid composites on flexural strength and modulus compared with pure CF woven composites. The behaviors of hybrid composites with longitudinal direction of paper are greater than that with transverse direction on stress, modulus, and the absorbed energy in the same configurations. Furthermore, spatial flexural morphologies are also affected by damage path. The final failure modes integrate the continuous woven fabric composite and discontinuous CF/PA6 fiber paper composite, mainly including fiber and matrix fracture, fiber pull-out and delamination. It provides a guidance for material design and structural optimization in reusing of carbon fibers. [ABSTRACT FROM AUTHOR]

The number of articles being retracted rose sharply this year. Integrity experts say that this is only the tip of the iceberg. [ABSTRACT FROM AUTHOR]

Paper dusting has recently been recognized as a significant issue in the hygiene tissue industry. This review considers the factors that may contribute to dusting and linting, as well as the challenges of evaluating dusting propensity. Examining both the paper and textile industries, several methods of dusting and linting assessment exist. This review describes the equipment, methodologies, targeted paper grades or materials, advantages, and disadvantages. Standards (if applicable) are also covered for each of the major methods. These existing methods were found to have various drawbacks, suggesting a need for an improved, standardized method and device. In conclusion, and to motivate future research, mechanisms of dust release are reviewed along with existing and possible solutions to combat the tissue-dusting problem. This paper outlines the importance of creating a repeatable, standard, and accurate testing procedure and methodology for dust particle characterization in the hygiene tissue industry. [ABSTRACT FROM AUTHOR]

Dual-emissive fluorescent carbon dots (CDs) were prepared through the solvothermal method with citric acid and urea as raw materials and dimethylformamide as the solvent. Two emission peaks were observed at 465 nm and 630 nm. Hg2+ could selectively quench the fluorescence at 630 nm, but the fluorescence intensity at 465 nm was less affected. Accordingly, a ratiometric fluorescence sensor for Hg2+ detection was developed, with a linear detection range of 0.5–40 μM and a limit of detection (LOD) of 37 nM. The dual-emissive CDs were loaded on the surface of the filter paper to fabricate Hg2+ detection test paper. The color of the test paper could be changed from pink purple to blue by the addition of Hg2+, and thus the qualitative and quantitative detection of Hg2+ could be realized. The concentration distinguishable by the naked eye reached 50 μM, and the quantitative detection range was 5–10,000 μM. This method shows excellent selectivity for Hg2+ and can be used to detect Hg2+ in real water samples, providing a highly potential sensing platform for rapid on-site detection of mercury ions. [ABSTRACT FROM AUTHOR]

Anger suppression is important in our daily life, as its failure can sometimes lead to the breaking down of relationships in families. Thus, effective strategies to suppress or neutralise anger have been examined. This study shows that physical disposal of a piece of paper containing one's written thoughts on the cause of a provocative event neutralises anger, while holding the paper did not. In this study, participants wrote brief opinions about social problems and received a handwritten, insulting comment consisting of low evaluations about their composition from a confederate. Then, the participants wrote the cause and their thoughts about the provocative event. Half of the participants (disposal group) disposed of the paper in the trash can (Experiment 1) or in the shredder (Experiment 2), while the other half (retention group) kept it in a file on the desk. All the participants showed an increased subjective rating of anger after receiving the insulting feedback. However, the subjective anger for the disposal group decreased as low as the baseline period, while that of the retention group was still higher than that in the baseline period in both experiments. We propose this method as a powerful and simple way to eliminate anger. [ABSTRACT FROM AUTHOR]

Uric acid (UA) is an important biomarker, as a high concentration in blood can lead to gout and further renal syndrome. Although several point-of-care testing (POCT) devices have been reported to detect UA, there are some limitations such as the requirement for uricase and the complicated pretreatment of serum/plasma samples, which restricts their use at home or in undeveloped areas. In this work, we developed an approach by applying Zn2+ to precipitate proteins and cells in whole blood to avoid interference with the chromogenic reaction. We used carboxymethylcellulose (CMC) to immobilize tetramethylbenzidine (TMB) on a nitrocellulose membrane for colorimetric detection. Using the oxidization properties of H2O2, which turns TMB into oxidized tetramethylbenzidine (TMBox) in the presence of catalyst gold nanoparticles (AuNPs), we successfully constructed an enzyme-free paper-based POCT device using the reduction reaction of UA and TMBox for simple, speedy, and cheap colorimetric detection of UA, achieving a detection time of 8 min, a linear range of 0–150 μg/mL, and an LOD of 25.79 μg/mL. The UA concentration in whole blood samples was further measured and correlated well with the clinical value (R2 = 0.8212). Thus, the proposed assay has the potential for POCT diagnosis, monitoring, and prognosis of diseases related to UA. By applying Zn2+ reagent to precipitate proteins and cells in whole blood and the reduction reaction of UA, an enzyme-free paper-based POCT assay was established. [ABSTRACT FROM AUTHOR]

Despite progress in the prevention and diagnosis of cancer, current technologies for tumor detection present several limitations including invasiveness, toxicity, inaccuracy, lengthy testing duration and high cost. Therefore, innovative diagnostic techniques that integrate knowledge from biology, oncology, medicinal and analytical chemistry are now quickly emerging in the attempt to address these issues. Following this approach, here we developed a paper-based electrochemical device for detecting cancer-derived Small Extracellular Vesicles (S-EVs) in fluids. S-EVs were obtained from cancer cell lines known to express, at a different level, the αvβ6 integrin receptor, a well-established hallmark of numerous epithelial cancer types. The resulting biosensor turned out to recognize αvβ6-containing S-EVs down to a limit of 0.7*103 S-EVs/mL with a linear range up to 105 S-EVs /mL, and a relative standard deviation of 11%, thus it may represent a novel opportunity for αvβ6 expressing cancers detection. The detection of cancer in its early stages can greatly prevent disease development, however, current technologies for tumor detection present several limitations. Here, the authors develop a paper-based electrochemical device for detecting cancer-derived small extracellular vesicles (S-EVs) in fluids, recognizing αvβ6-containing S-EVs down to a limit of 0.7*103 S-EVs/mL with a linear range up to 105 S-EVs/mL. [ABSTRACT FROM AUTHOR]

Paper-based electronics have attracted much attention due to their softness, degradability, and low cost. However, paper-based sensors are difficult to apply to high-humidity environments or even underwater. Here, we report a fully paper-integrated piezoresistive sensing system that exhibits flexibility, waterproofing, air permeability, and biocompatibility. This system consists of hydrophobic paper as the substrate and encapsulation layer, conductive paper with a double 'zig-zag' and dotted surface structure as the sensing layer, and silver paste films as the interconnects. The structural design of the sensing layer helps to increase the contact area in adjacent layers under pressure and further improves the pressure sensitivity. The piezoresistive system can be worn on human skin in the ambient environment, wet environment, and water for real-time monitoring of physiological signals with air permeability and waterproofing due to its hydrophobic fiber structure. Such a device provides a reliable, economical, and eco-friendly solution to wearable technologies. [ABSTRACT FROM AUTHOR]

Laserjet printing is a kind of facile and digital do-it-yourself strategies, which is of importance to fabricate inexpensive paper-based microfluidic devices. However, the printed hydrophobic barrier is not hydrophobic enough due to the weak hydrophobicity and requires subsequent heating, which can lead to the pyrolysis of cellulose in the paper and influence the detection results. Here, for the first time, we report a kind of functional toner including toner and polydopamine (PDA) nanocapsules which contains oleic acid modified ferric tetroxide (OA-Fe3O4) and octadecylamine (ODA), which is suitable for printing with desired shapes and sizes to lead to formation of superhydrophobic barriers. Moreover, patterns printed with functional toner have good stability, including resistance to moisture, ultraviolet (UV) and bending. Finally, a proof-of-concept of metal and nitrite ions testing is demonstrated using colorimetric analysis, and the results show that the printed devices successfully perform instant detection of ions. The developed functional toner offers easy fabrication, cost-effectiveness and mass production of paper-based devices. In general, this strategy provides a new idea and technical support for the rapid prototyping of microfluidic paper-based analytical devices (μPADs) using laserjet printing. [ABSTRACT FROM AUTHOR]

Numerous natural dyes were used to dye mediaeval Islamic paper from the tenth to the nineteenth century, using a variety of techniques. The objective of this research is to develop an analytical method using high performance liquid chromatography with diode array detection (HPLC–DAD) to identify natural dyes in forty historical Islamic paper manuscripts from two collections. In addition, novel information was obtained from original treatises containing recipes for dyeing paper and the chronological use of dyes in dyeing mediaeval Islamic paper between the tenth and seventeenth centuries. The results show that thirty-four of the forty manuscripts examined contained dyes. Six natural dyes were detected, including henna, madder, lac, safflower, turmeric, and weld. This is the first study aimed at developing a method for determining various natural dyes in Islamic paper from a wide historical and geographical range in the mediaeval time and to fill significant gaps in the technical and historical knowledge of papermaking. [ABSTRACT FROM AUTHOR]

Free-standing reduced graphene oxide (rGO) papers were prepared by chemical reduction, thermal reduction and combined chemical-thermal reduction, respectively. Four-point probe and nanoindentation experiments were conducted to investigate the electrical and mechanical properties of rGO papers. The rGO paper prepared by soaking in L-ascorbic acid and thermal annealing in argon at 1000 °C (labeled rGO-AsA-T) showed superior electrical and mechanical properties when compared with rGO papers prepared merely by chemical reduction or thermal reduction. The as-prepared rGO-AsA-T paper exhibited an electrical conductivity of 5.7 × 104 S/m, showing an increase of 90% compared to that in the thermally annealed rGO paper and nearly 40 times that of rGO paper reduced by L-ascorbic acid. It was also found that the rGO-AsA-T paper had the lowest elastic modulus of 288 MPa, showing enhanced flexibility. The nearly free voids in rGO-AsA-T paper proved by scanning electron microscopy (SEM) were due to the capillary action in chemical reduction and were significant in improving the electrical conductivity and flexibility of the paper. The rGO-AsA-T paper with high conductivity and flexibility has a promising application in flexible electronics. [ABSTRACT FROM AUTHOR]

During graduate education, postgraduates have to spend considerable time finding papers to explore the development branches of their field. However, existing paper recommendation methods focus on several attributes (title, author, keyword, venue, etc.). The network schema constructed by these attributes is extremely sparse, which easily causes the loss of important semantic paths between attributes. This results in a lack of correlations among relevant papers, which affects paper recommendation efficiency. Moreover, the relationships between multiple semantic paths can be found through common homogeneous and heterogeneous attributes. These relationships can establish many correlations among relevant papers. To address the above problems, this paper proposes a new approach to fuse multi-semantic paths into a heterogeneous educational network (HEN) for personalized paper recommendation. After data processing, a new HEN schema is built by enriching nodes and edges in heterogeneous networks. Then, different semantic meta-paths are generated by projection sub-nets. Next, a new HEN embedding method is proposed by multi-semantic path fusion to generate rich HEN node sequences. Finally, personalized paper recommendation for postgraduates by targeted path similarity. The proposed method was performed on two paper datasets in the fields of educational intergenerational mobility from 1987 to 2021 and data mining and intelligent media from 1997 to 2021. Substantial experiments demonstrate that the proposed approach is effective. [ABSTRACT FROM AUTHOR]

Extracts from amur cork tree barks contain some of the most important traditional natural dyes used, especially for functional production in ancient Chinese papers, due to religious reasons and their aesthetic aspects and antibacterial properties. Some ancient paper artefacts, dyed with this colourant and scattered around the world, are currently preserved to different extents. This study aims to characterize the thermal degradation process of amur cork tree bark extracts dyed papers to improve the knowledge and effectiveness of restoration practices. The properties of extracts dyed papers treated under dry-heat accelerating ageing conditions were investigated via optical observation and scanning electron microscopy as well as with pH, tensile strength and folding endurance analyses. The results showed that the main components from extracted dyes played important roles in affecting the properties of dyed paper. The changes in surface colour, pH, morphology and mechanical properties after the artificial dry-heat ageing tests revealed the most suitable concentration of extract dyes for maintaining the long-term thermal stability of the paper. [ABSTRACT FROM AUTHOR]

This article, titled "Historic Behavior in Nonautonomous Rock-Paper-Scissors Dynamics," explores the concept of historic behavior in dynamical systems. The author challenges the widely held belief that replicator equations in evolutionary game theory satisfy the "Folk Theorem of Evolutionary Game Theory." The paper proposes a class of replicator equations that exhibit historic behavior, where the time averages of the orbit do not converge. The article also presents some auxiliary results and provides a proof for the main theorem. The research was supported by ongoing institutional funding, and the author declares no conflicts of interest. [Extracted from the article]

An unpublished analysis suggests that there are hundreds of thousands of bogus ‘paper-mill’ articles lurking in the literature. [ABSTRACT FROM AUTHOR]