Search

Antibodies are crucial in various biological applications due to their specific binding to target molecules, altering protein function and structure. The advent of single-chain antibodies such as nanobodies has paved the way for broader applicability in both research and therapies due to their small size and efficient tissue penetration. Recently, several approaches have been reported to optically control the antigen-binding affinity of nanobodies. Here, we show an alternative strategy for creating photo-activatable nanobodies. By fusing the photocleavable protein PhoCl with the N-terminus of the nanobody (named optoNb60), we successfully demonstrated light-dependent restoration of the antigen-binding ability and the following modulation of the activity of a target protein, the beta-2 adrenergic receptor. Moreover, the activation of optoNb60 was monitored by the fluorescence changes upon photoconversion. The compatibility of the uncaging design with the previously reported optogenetic molecules using nanobodies will contribute to the further optimization of the response capabilities of existing optogenetic tools, thereby expanding their applicability.

Protein phase separation plays a very important role in many biological processes and is closely related to the occurrence and development of some serious diseases. So far, the fluorescence imaging method and fluorescence correlation spectroscopy (FCS) have been frequently used to study the phase separation behavior of proteins. Due to the wide size distribution of protein condensates in phase separation from nano-scale to micro-scale in solution and living cells, it is difficult for the fluorescence imaging method and conventional FCS to fully reflect the real state of protein phase separation in the solution due to the low spatio-temporal resolution of the conventional fluorescence imaging method and the limited detection area of FCS. Here, we proposed a novel method for studying the protein phase separation process by objective scanning-based fluorescence cross-correlation spectroscopy (Scan-FCCS). In this study, CRDBP proteins were used as a model and respectively fused with fluorescent proteins (EGFP and mCherry). We first compared conventional FCS and Scan-FCS methods for characterizing the CRDBP protein phase separation behaviors and found that the reproducibility of Scan-FCS is significantly improved by the scanning mode. We studied the self-fusion process of mCherry-CRDBP and EGFP-CRDBP and observed that the phase change concentration of CRDBP was 25 nM and the fusion of mCherry-CRDBP and EGFP-CRDBP at 500 nM was completed within 70 min. We studied the effects of salt concentration and molecular crowding agents on the phase separation of CRDBP and found that salt can prevent the self-fusion of CRDBP and molecular crowding agents can improve the self-fusion of CRDBP. Furthermore, we found the recruitment behavior of CRDBP to β-catenin proteins and studied their recruitment dynamics. Compared to conventional FCS, Scan-FCCS can significantly improve the reproducibility of measurements due to the dramatic increase of detection zone, and more importantly, this method can provide information about self-fusion and recruitment dynamics in protein phase separation.

Molecules of fluorescent proteins (FPs) exhibit distinct optical directionality. This optical directionality is characterized by transition dipole moments (TDMs), and their orientation with respect to the molecular structures. Although our recent observations of FP crystals allowed us to determine the mean TDM directions with respect to the framework of representative FP molecules, the dynamics of TDM orientations within FP molecules remain to be ascertained. Here we describe the results of our investigations of the dynamics of TDM directions in the fluorescent proteins eGFP, mTurquoise2 and mCherry, through time-resolved fluorescence polarization measurements and microsecond time scale all-atom molecular dynamics (MD) simulations. The investigated FPs exhibit initial fluorescence anisotropies ( r 0 ) consistent with significant differences in the orientation of the excitation and emission TDMs. However, based on MD data, we largely attribute this observation to rapid (sub-nanosecond) fluorophore motions within the FP molecular framework. Our results allow improved determinations of orientational distributions of FP molecules by polarization microscopy, as well as more accurate interpretations of fluorescence resonance energy transfer (FRET) observations.

In this study, we develop a general analytical model of the photochromism of fluorescent proteins and apply it to spectroscopic measurements performed on six different labels. Our approach provides quantitative explanations for phenomena such as the existence of positive and negative switching, limitations in the photochromism contrast, and the fact that initial switching cycles may differ from subsequent ones. It also allows us to perform the very first measurement of all four isomerization quantum yields involved in the switching process.

DNA binding fluorescent proteins are useful probes for a broad range of biological applications. Fluorescent protein (FP)-tagging allows DNA binding proteins expressed within a living cell to be directly visualised, in real-time, to study DNA binding patterns and dynamics. Moreover, FP-tagged DNA binding proteins (FP-DBP) have allowed the imaging of single proteins bound to large elongated DNA molecules with a fluorescence microscope. Although there are numerous DNA binding proteins, only a small portion of them have been exploited to construct FP-DBPs to study molecular motion in a cell or in vitro single-molecule visualisation. Therefore, it would be informative to review FP-DBP for further development. Here, we summarise the design of FP-DBPs and their brightness, photostability, pKa, maturation rate, and binding affinity (Kd) characteristics. Then, we review the applications of FP-DBP in cells to study chromosome dynamics, DNA replication, transcription factors, DNA damage, and repair. Finally, we focus on single DNA molecule visualisation using FP-DBP.

Using enhanced yellow fluorescent protein, we demonstrate the feasibility to use fluorescent proteins as a label-free tension sensor to monitor integrin tension.

Bioluminescence resonance energy transfer (BRET) is a commonly used assay system for studying protein-protein interactions and protein folding in vivo. Conventional BRET systems have solely depended on an overlap of the energy donor and acceptor spectra. In this study, we engineered a conceptually unique ligand-activatable BRET system (termed BRET9), where a full-length Artificial Luciferase variant 23 (ALuc23), acting as the energy donor, is sandwiched between a protein pair of interest, FRB and FKBP12, and linked to a fluorescent protein as the energy acceptor. A specific ligand, rapamycin, then activates inter- and intramolecular interactions of FRB and FKBP12, which develop molecular strain in the sandwiched ALuc23 to accelerate further folding. We found that this system greatly enhanced both the total bioluminescence spectrum and the BRET signal in the far-red (FR) region. We characterized the molecular construct by studying 18 different designs categorized into four groups. The best BRET system design allowed an approximately 5-fold enhancement of the bioluminescence intensities in the FR region. This new BRET system provides a robust ligand-activatable platform that efficiently reports FR bioluminescence signals in cells and living animal models.

Since anthrax spores are highly lethal to human beings and animals, and also potential biological warfare agents, it is highly desirable to develop simple, robust and easy-device sensors that are rapid and sensitive, and can selectively detect the Bacillus anthrax biomarker dipicolinic acid (DPA) quantitatively. Herein, we report a ratiometric luminescent "turn-on" sensor via mixing Eu 3+ ions, sodium polyacrylate and internal luminescence reference in water, which can identify the Bacillus anthrax biomarker dipicolinic acid (DPA) quantitatively with outstanding selectivity over aromatic ligands and amino acids, even including all of the 5 DPA isomers.

Though plenty of viral and non-viral methods have been rapidly developed for the delivery of the CRISPR/Cas9 system, the direct delivery of Cas9 ribonucleoproteins (RNPs) into the nucleus for genome editing via the non-homologous end joining (NHEJ) or homology-directed repair (HDR) pathway, especially the latter one, remains a challenge. Here we report a delivery vehicle achieved by encapsulating red fluorescent protein (RFP) within chitosan (CS), which can simultaneously deliver engineered Cas9 RNPs with a poly-glutamate peptide tag (E-tag) and DNA donors into a range of cell types with high genome editing efficacy and non-cytotoxicity.

Odorants constitute a small and chemically diverse group of molecules with ethanol functioning as a key odorant that induces reproductive toxicity and adverse chronic effects on the liver. Analytical tools designed so far for the detection of odorant molecules are relatively invasive. Therefore, a tool that can measure the corresponding rate changes of ethanol concentration in real-time is highly desirable. Here in this work, we report a genetically encoded fluorescence resonance energy transfer (FRET)-based nanosensor for in vivo quantification of ethanol at the cellular level with high spatial and temporal resolution. A human odorant-binding protein (hOBPIIa) was flanked by fluorescent proteins ECFP (Enhanced Cyan Fluorescent Protein) and Venus at the N- and C-terminus respectively. The constructed FRET nanosensor was named the fluorescent indicator protein for odorants (FLIPO). FLIPO allows in vitro and in vivo determination of FRET changes in a concentration-dependent manner. The developed nanosensor is highly specific to ethanol, stable to pH changes and provides rapid detection rate response. FLIPO-42 is the most efficient nanosensor created that measures ethanol with an apparent affinity (Kd) of 4.16 μM and covers the physiological range of 500 nM to 12 μM ethanol measurement. FLIPO-42 can measure ethanol dynamics in bacterial, yeast and mammalian cells non-invasively in real time which proves its efficacy as a sensing device in both prokaryotic and eukaryotic systems. Taken together, a prototype for a set of nanosensors was established, potentially enabling the monitoring of dynamic changes of ethanol and investigate its uptake and metabolism with subcellular resolution in vivo and ex vivo. Furthermore, the advent of a set of novel nanosensors will provide us with the tools for numerous medical, scientific, industrial and environmental applications which would help to illuminate their role in biological systems.

Self-labelling protein tags with fluorogenic probes serve as great fluorescence imaging tools to understand key questions of protein dynamics and functions in living cells. In the present study, we report a SNAP-tag fluorogenic probe 4c mimicking the chromophore of the red fluorescent protein Kaede. The molecular rotor properties of 4c were utilized as a fluorogenic probe for SNAP-tag, such that conjugation with SNAPf protein leads to inhibition of twisted intramolecular charge transfer, triggering fluorogenecity. Upon conjugation with SNAPf, 4c exhibited approximately a 90-fold enhancement in fluorescence intensity with fast labelling kinetics (k2 = 15 000 M-1 s-1). Biochemical and spectroscopic studies confirmed that fluorescence requires formation of folded SNAPf·4c covalent conjugate between Cys 145 and 4c. Confocal microscopy and flow cytometry showed that 4c is capable of detecting SNAPf proteins or SNAPf fused with a protein of interest in living cells. This work provides a framework to develop the large family of FP chromophores into fluorogenic probes for self-labelling protein tags.

The BiFC (bimolecular fluorescence complementation) assay and BiFC combined with FRET (fluorescence resonance energy transfer) technique have become important tools for molecular interaction studies in live cells. However, the real detection and cellular imaging performances of most existing red fluorescent protein-derived BiFC assays still suffer from relatively low ensemble brightness, high cytotoxicity, the red fluorescent proteins being prone-to-aggregation or severe residual dimerization, inefficient complementation and slow maturation at 37 °C physiological temperature in live mammalian cells. We developed a BiFC assay based on a recently evolved truly monomeric red fluorescent protein (FP) mScarlet-I with excellent cellular performances such as low cytotoxicity, fast and efficient chromophore maturation and the highest in-cell brightness among all previously reported monomeric red fluorescent proteins. In this work, a classic β-Fos/β-Jun constitutive heterodimerization model and a rapamycin-inducible FRB/FKBP interaction system were used to establish and test the performance of the mScarlet-I-based BiFC assay in live mammalian cells. Furthermore, simply by adopting the large-Stokes-shift fluorescent protein mAmetrine as the donor, β-Jun-β-Fos-NFAT1 ternary protein complex formation could be readily and efficiently detected and visualized with minimal spectral cross-talk in live HeLa cells by combining live-cell sensitized-emission FRET measurement with the mScarlet-I-based BiFC assay. The currently established BiFC assay in this work was also shown to be able to detect and visualize various protein-protein interactions (PPIs) at different subcellular compartments with high specificity and sensitivity at 37 °C physiological temperature in live mammalian cells.

Here we describe the design of a bioluminescent stem-loop probe for the sensitive detection of HIV-1 spliced RNA. In this study, we employed Gaussia luciferase (GLuc), a bioluminescent protein that has several advantages over other bioluminescent proteins, including smaller size, higher bioluminescent intensity, and chemical and thermal stability. GLuc was chemically conjugated to the DABCYL-modified stem-loop probe (SLP) and was purified with a 2-step process to remove unconjugated GLuc and SLP. The binding of the target RNA to the loop region of the SLP results in the open conformation separating the stem part of SLP. GLuc conjugated to the stem acts as a reporter that produces light by a chemical reaction upon adding its substrate, coelenterazine in the presence of the target, while DABCYL serves as a quencher of bioluminescence in the closed conformation of SLP in the absence of the target. The optimized GLuc based-SLP assay resulted in a signal-to-background ratio of 47, which is the highest reported with bioluminescent SLPs and is significantly higher compared to traditional fluorescence-based SLPs that yield low signal to background ratio. Moreover, the assay showed an excellent selectivity against a single and double mismatched nucleic acid target, low detection limit, and ability to detect spiked HIV-1 RNA in human serum matrix.

LOV-domains are ubiquitous photosensory proteins that are commonly re-engineered to serve as powerful and versatile fluorescent proteins and optogenetic tools. The photoactive, flavin chromophore, however, is excited using short wavelengths of light in the blue and UV regions, which have limited penetration into biological samples and can cause photodamage. Here, we have used non-linear spectroscopy and microscopy of the fluorescent protein, iLOV, to reveal that functional variants of LOV can be activated to great effect by two non-resonant photons of lower energy, near infrared light, not only in solution but also in biological samples. The two photon cross section of iLOV has a significantly blue-shifted S0 → S1 transition compared with the one photon absorption spectrum, suggesting preferential population of excited vibronic states. It is highly likely, therefore, that the two photon absorption wavelength of engineered, LOV-based tools is tuneable. We also demonstrate for the first time two photon imaging using iLOV in human epithelial kidney cells. Consequently, two photon absorption by engineered, flavin-based bio-molecular tools can enable non-invasive activation with high depth resolution and the potential for not only improved image clarity but also enhanced spatiotemporal control for optogenetic applications.

Many photoactive proteins contain chromophores based on para-substituted phenolate anions which are an essential component of their electronic structure. Here, we present a reductionist approach to gain fundamental insight into the evolution of electronic structure as the chromophore increases in complexity from phenolate to that in GFP. Using frequency- and angle-resolved photoelectron spectroscopy, in combination with electronic structure theory, the onset of excited states that are responsible for the characteristic spectroscopic features in biochromophores are determined. A comprehensive, yet intuitive picture of the effect of phenolate functionalisation is developed based on simple Hückel theory. Specifically, the first two bright excited states can be constructed from a linear combination of molecular orbitals localised on the phenolate and para-substituent groups. This essential interaction is first observed for p-vinyl-phenolate. This bottom-up approach offers a readily accessible framework for the design of photoactive chromophores.

Periplasmic binding proteins (PBPs) are members of a widely distributed protein superfamily found in bacteria and archaea, and are involved in the cellular uptake of solutes. In this report, a leucine-binding PBP was engineered to detect l-Leu based on a fluorescence resonance energy transfer (FRET) change upon ligand binding. A fluorescent unnatural amino acid, l-(7-hydroxycoumarin-4-yl)ethylglycine (CouA), was genetically incorporated into the protein as a FRET donor, and a yellow fluorescent protein (YFP) was fused with its N-terminus as a FRET acceptor. When CouA was incorporated into position 178, the sensor protein showed a 2.5-fold increase in the FRET ratio. Protein engineering significantly improved its substrate specificity, showing minimal changes in the FRET ratio with the other 19 natural amino acids and d-Leu. Further modification increased the sensitivity of the sensor protein (14-fold) towards l-Leu, and it recognized l-Met as well with moderate binding affinity. Selected mutant sensors were used to measure concentrations of l-Leu in a biological sample (fetal bovine serum) and to determine the optical purity of Leu and Met. This FRET-based sensor design strategy allowed us to easily manipulate the natural receptor to improve its binding affinity and specificity and to recognize other natural molecules, which are not recognized by the wild-type receptor. The design strategy can be applied to other natural receptors, enabling engineering receptors that sense biochemically interesting molecules.

Natural genetic promoters are regulated by multiple cis and trans regulatory factors. For quantitative studies of these promoters, the concentration of only a single factor is typically varied to obtain the dose response or transfer function of the promoters with respect to the factor. Such design of experiments has limited our ability to understand quantitative, combinatorial interactions between multiple regulatory factors at promoters. This limitation is primarily due to the intractable number of experimental combinations that arise from multifactorial design of experiments. To overcome this major limitation, we integrate impact printing and cell-free systems to enable multi-dimensional studies of genetic promoters. We first present a gradient printing system which comprises parallel piezoelectric cantilever beams as a scalable actuator array to generate droplets with tunable volumes in the range of 100 pL-10 nL, which facilitates highly accurate direct dilutions in the range of 1-10 000-fold in a 1 μL drop. Next, we apply this technology to study interactions between three regulatory factors at a synthetic genetic promoter. Finally, a mathematical model of gene regulatory modules is established using the multi-parametric and multi-dimensional data. Our work creates a new frontier in the use of cell-free systems and droplet printing for multi-dimensional studies of synthetic genetic constructs.

Fluorescent protein biosensors are popular reporters for biological processes and life sciences, but their fundamental working mechanisms remain unclear. To characterize the functional fluorescence events on their native timescales, we implemented wavelength-tunable femtosecond stimulated Raman spectroscopy (FSRS) to shed light on a blue-green emission-ratiometric fluorescent protein based Ca 2+ biosensor with a single Pro377Arg mutation. The transient Raman modes of the embedded chromophore from ca. 1000-1650 cm -1 exhibit characteristic intensity and frequency dynamics which infer the underlying atomic motions and photochemical reaction stages. Our experimental study reveals the hidden structural inhomogeneity of the protein local environment upon Ca 2+ binding with the mutated arginine residue trapping multiple chromophore subpopulations, which manifest distinct time constants of ∼16 and 90 ps for excited state proton transfer (ESPT) following 400 nm photoexcitation. The altered ESPT reaction pathways and emission properties of the Ca 2+ biosensor represent the foundational step of rationally designing advanced fluorescent protein biosensors to tune their functionalities by site-specifically altering the local environment (e.g., the active site) of the embedded chromophore.

Bioluminescent molecular beacons have been developed using a modular design approach that relies on BRET between the bright luciferase NanoLuc and a Cy3 acceptor. While classical molecular beacons are hampered by background fluorescence and scattering, these BRET-beacons allow detection of low pM concentrations of nucleic acids directly in complex media.

The human immunodeficiency virus (HIV) destroys CD4+ lymphocytes and monitoring these cells is one of the best techniques for studying HIV infection. In the present study a novel bioluminescent probe, super RLuc8-sFv, is developed in order to detect human CD4+ cells by fusion of an anti-human CD4 sFv to the C-terminus of super RLuc8. The results indicate that the probe can bind to CD4+ cells via its sFv domain; also it emits visible light through its signalling domain. Super RLuc8-sFv provides a new gateway for detection of human CD4+ cells using luminometric-based assays and may reduce the difficulties involved in, and the cost of, HIV-related diagnostic tests.

Single-molecule localization microscopy relies on either controllable photoswitching of fluorescent probes or their robust blinking. We have found that blinking of monomeric red fluorescent proteins TagRFP, TagRFP-T, and FusionRed occurs at moderate illumination power and matches well with camera acquisition speed. It allows for super-resolution image reconstruction of densely labelled structures in live cells using various algorithms.

Here we present mGarnet2, a monomeric, far-red fluorescent marker protein derived from mRuby, with absorption and emission bands peaking at 598 and 671 nm, respectively. The protein shows excellent performance as a live-cell fusion marker for STED nanoscopy with 640 nm excitation and 780 nm depletion wavelengths.

To expand the toolbox of fluorescent protein-based voltage indicators, we explored two distinct protein design strategies. Using these design strategies, we created three new voltage indicators: a red intensiometric voltage indicator (tdFlicR Δ110AR), a green/red ratiometric voltage indicator (tdFlicR-VK-ASAP), and a green to red photoconvertible voltage indicator (FlicGR1).

Flexible proteins are frequently used to link subunits of larger complexes in various contexts, for instance, in the construction of unimolecular sensors used in FRET microscopy, and fusion proteins. How flexible such linkers are can be an important question in the overall design of the complex, and yet sometimes suprisingly difficult to establish. Such difficulties can arise because the actual flexibility of a protein depends significantly on its interactions with the solvent, and when the local environment is a subcellular compartment, even the conditions of the solvent, may not be known. In this communication we propose a simple numerical procedure through which the flexibility of such proteins can be extracted from FRET based microscopy data.

Extensive MD simulations combined with QM/MM calculations have been performed on mNeptune1 and mCardinal red fluorescent proteins to establish the reasons behind the red shift of the excitation wavelength of mCardinal with respect to mNeptune1. In both cases, it is seen that Arg197 stabilizes the chromophore but cannot be described as stabilizing preferentially the excited state because of the anchor point of the interaction. The interactions of the linking bonds to the α-helix of both proteins to the chromophore have been analyzed. It has been found that, besides the presence of a strategically placed residue Gln41 in mCardinal, solvation water molecules play an active role in the energetics of the stabilization of the excited state, which is preferentially stabilized in the case of mCardinal in contrast to mNeptune1.

Fusion of disulfide-constrained or linear versions of the Car9 dodecapeptide to model fluorescent proteins support their on-contact and oriented immobilization onto unmodified glass. Bound proteins can be released and the surface regenerated by incubation with l-lysine. This noncovalent chemistry enables rapid and reversibe microcontact printing of tagged proteins and speeds up the production of bicontinuous protein patterns.

Selective plane illumination microscopy can image biological samples at a high spatiotemporal resolution. Complex sample preparation and system alignment normally limit the throughput of the method. Using femtosecond laser micromachining, we created an integrated optofluidic device that allows obtaining continuous flow imaging, three-dimensional reconstruction and high-throughput analysis of large multicellular spheroids at a subcellular resolution.

Classical molecular dynamics (MD) simulations are carried out for the recently developed TagRFP675 fluorescent protein (FP), which is specifically designed to fully absorb and emit in the near infrared (NIR) region of the electromagnetic spectrum. Since the X-ray data of TagRFP675 reveal that the chromophore exists in both the cis and trans configuration and it can also be neutral (protonated) or anionic (deprotonated) depending on the pH of the media, a total of 8 molecular dynamic simulations have been run to simulate all the possible states of the chromophore. Time-dependent DFT (TDDFT) single point calculations are performed at selected points along the simulation to theoretically mimic the absorption spectrum of the protein. Our simulations compare well (within the expected error of the computational method) with the experimental results. Our theoretical procedure allows for an analysis of the molecular orbitals involved in the lowest energy electronic excitations of the chromophore and, more interestingly, for a full analysis of the H-bond interactions between the chromophore and its surrounding residues and solvent (water) molecules. This study does not support the hypothesis, exclusively based on the analysis of X-ray data, that the isomerization of nearby residues provokes the rearrangement of the hydrogen bonds in the chromophore's immediate environment leading to the observed red shift of the absorption bands at higher pHs. Instead, we attribute this shift mainly to the superposition of bands of the neutral and anionic chromophores that are expected to coexist at almost the full range of pHs experimentally analyzed. An additional factor that could contribute to this shift is the experimentally observed increase of the cis configuration of the chromophore at higher pHs.

Photoactivatable fluorescent proteins (PA-FPs) are widely used in live single-molecule super-resolution imaging but emit substantially fewer photons than organic dyes do. Herein, we show that in heavy water (D2O) instead of H2O, common PA-FPs emit 26-54% more photons, effectively improving the localization precision in super-resolution imaging.

Understanding the role of oxidative stress in disease requires real time monitoring of redox status within a cell. We report a FRET-based, ratiometric redox probe which can be applied to monitor cellular oxidative capacity using three different modalities – confocal microscopy, fluorescence lifetime imaging and flow cytometry.

The single-domain antibody (VHH) is a promising building block for a number of antibody-based applications. Ribosome display can successfully be used in the production of VHH. However, the construction of the expression cassette, confirmation of the translation and proper folding of the nascent chain, and the purification of the ribosome complexes, remain cumbersome tasks. Additionally, selection of the most suitable expression system can be challenging. We have designed primers that will amplify virtually all Camelidae VHH. With the help of a double-overlap extension (OE) polymerase chain reaction (PCR) we have fused VHH with the F1 fragment (T7 promoter and species-independent translation sequence) and the F2 fragment (mCherry, Myc-tag, tether, SecM arrest sequence and 3' stem loop) to generate a full-length DNA cassette. OE-PCR generated fragments were incubated directly with cell-free lysates (Leishmania torentolae, rabbit reticulocyte or E. coli) for the synthesis of mRNA-VHH-mCherry-ribosome complexes in vitro. Alternatively, the cassette was ligated in pQE-30 vector and transformed into E. coli to produce ribosome complexes in vivo. The results showed that the same expression cassette could be used to synthesize ribosome complexes with different expression systems. mCherry reporter served to confirm the synthesis and proper folding of the nascent chain, Myc-tag was useful in the rapid purification of ribosome complexes, and combination of the SecM sequence and 3' stem loop made the cassette universal, both for cells-free and E. coli in vivo. This rapid and universal pipeline can effectively be used in antibody ribosome display and VHH production.

The interplay of Phe-Gly-Gly (FGG)-tagged proteins and bivalent FGG-tagged penta(ethylene glycol) as guest molecules with cucurbit[8]uril (Q8) hosts is studied to modulate the supramolecular assembly process. Ring structure formation of the bivalent guest molecule with Q8 leads to enhanced binding properties and efficient inhibition of protein assemblies.

Supramolecular assembly of a beta-barrel protein via cucurbit[8]uril results in compact z-shaped protein dimers. SAXS data reveal the formation of a well ordered protein dimer, notwithstanding being connected by a reversible and flexible peptide linker, and highlight the supramolecular induced interplay of the proteins, analogous to covalently linked proteins.

We report here the generation of a fluorescent protein (FP)-based dual molecular beacon (MB) system for nucleic acid detection. Halo-tag mediated conjugation was used for the site-specific decoration of MBs with two different FP fusions, thereby enabling easy detection of target sequences by fluorescence resonance energy transfer or FRET. Enhanced intracellular delivery was demonstrated by simply tethering a well-known TAT peptide sequence to the N-terminus of the fusion proteins.

Photochromic fluorescence resonance energy transfer (pcFRET) was used to monitor the redox activity of non-fluorescent heme protein. Venus fluorescent protein was used as a donor where its emission intensity was reversibly modulated by the absorption change of Cytochrome c.

The newly developed scientific complementary metal oxide semiconductor (sCMOS) cameras are capable of realizing fast single molecule localization microscopy without sacrificing field-of-view, benefiting from their readout speed which is significantly higher than that of conventional charge-coupled device (CCD) cameras. However, the poor image uniformity (suffered from fixed pattern noise, FPN) is a major obstruction for widespread use of sCMOS cameras in single molecule localization microscopy. Here we present a quantitative investigation on the effects of FPN on single molecule localization microscopy via localization precision and localization bias. We found that FPN leads to almost no effect on localization precision, but introduces a certain amount of localization bias. However, for a commercial Hamamatsu Flash 4.0 sCMOS camera, such localization bias is usually <2 nm and thus can be neglected for most localization microscopy experiments. This study addresses the FPN concern which worries researchers, and thus will promote the application of sCMOS cameras in single molecule localization microscopy.

Fluorescent protein biosensors are typically implemented via genetic encoding which makes the examination of scarce cell samples impractical. By directly delivering the protein form of the biosensor into cells using electroporation, we detected intracellular molecular activity with the sample size down to ∼100 cells with high spatiotemporal resolution.

Fluorescent proteins are indispensable for selective, quantitative visualization of localization, dynamics, and interactions of key molecular constituents of live cells. Incorporation of fluorescent proteins into an optical cavity can lead to a significant increase in fluorescence signal levels due to stimulated emission and light amplification in the cavity, forming a laser with biological gain medium. Utilization of lasing emission from fluorescent biological molecules can then greatly enhance the performance of fluorescence-based biosensors benefiting from the high sensitivity of non-linear lasing processes to small perturbations in the cavity and the gain medium. Here we study optofluidic biolasers that exploit active liquid optical resonators formed by surface-supported aqueous microdroplets containing purified yellow fluorescent protein or a suspension of live E. coli bacterial cells expressing the fluorescent protein. We first demonstrate lasing in fluorescent protein solutions at concentrations as low as 49 μM. Subsequently, we show that a single fluorescent bacterial cell of micrometre size confined in a droplet-based cavity can serve as a laser gain medium. Aqueous droplet microcavities allow the maintenance of the bacterial cells under conditions compatible with unimpeded growth. Therefore, our results also suggest a direct route to microscopic sources of laser light with self-regenerating gain media.

The self-assembly of the model globular protein-polymer block copolymer mCherry-b-poly(N-isopropyl acrylamide) is explored across a range of polymer coil fractions from 0.21 to 0.82 to produce a phase diagram for these materials as a function of molecular composition. Overall, four types of morphologies were observed: hexagonally packed cylinders, perforated lamellae, lamellae, and disordered nanostructures. Across all coil fractions and morphologies, a lyotropic re-entrant order-disorder transition in water was observed, with disordered structures below 30 wt% and above 70 wt% and well-ordered morphologies at intermediate concentrations. Solid state samples prepared by solvent evaporation show moderately ordered structures similar to those observed in 60 wt% solutions, suggesting that bulk structures result from kinetic trapping of morphologies which appear at lower concentrations. While highly ordered cylindrical nanostructures are observed around a bioconjugate polymer volume fraction of 0.3 and well-ordered lamellae are seen near a volume fraction of 0.6, materials at lower or higher coil fractions become increasingly disordered. Notable differences between the phase behaviour of globular protein-polymer block copolymers and coil-coil diblock copolymers include the lack of spherical nanostructures at either high or low polymer coil fractions as well as shifted phase boundaries between morphologies which result in an asymmetric phase diagram.

We present a quantum chemical study of the two-photon absorption (TPA) properties of yellow fluorescent protein (YFP), a mutant of the extensively studied green fluorescent protein. The aromatic chromophore of YFP has a π-stacking interaction with the aromatic ring of a tyrosine residue (Tyr203) in a parallel-displaced structure with a distance of about 3.4 Å. We study the TPA spectrum of the π-stacking system of YFP using the well-established Coulomb-attenuated B3LYP density functional (CAM-B3LYP) and the second-order approximate coupled-cluster model CC2. This work presents both the first comprehensive study of the two-photon absorption spectrum of YFP and the largest-scale coupled-cluster calculation of two-photon absorption that has ever been performed. We analyze the intermolecular charge-transfer (ICT) transitions in this stacked system and show that the ICT transitions are an important mechanism for enhancing the TPA cross sections in YFP. We investigate the distance dependence of the ICT transitions and show that their TPA cross sections are strongly dependent on the separation of the aromatic moieties. This provides a means for tuning the TPA properties of YFP and other structurally related fluorescent proteins through molecular engineering.

Lanthanide complex-based luminescent bioprobes have shown great utility in a variety of time-resolved luminescence bioassays, but these bioprobes often require UV excitation and suffer from problems related to bioaffinity and biocompatibility for in vivo applications. In this work, a new visible-light-excited europium(III) complex with the maximum excitation wavelength over 400 nm, BHHBB-Eu(3+)-BPT {BHHBB: 1,2-bis[4'-(1'',1'',1'',2'',2'',3'',3''-heptafluoro-4'',6''-hexanedion-6''-yl)-benzyl]-benzene; BPT: 2-(N,N-diethylanilin-4-yl)-4,6-bis(pyrazol-1-yl)-1,3,5-triazine}, has been synthesized for the preparation of an artificial luminescent protein that can be used as a visible-light-excited luminescent bioprobe for cell imaging. By encapsulating BHHBB-Eu(3+)-BPT into apoferritin with a simple dissociation-reassembly method, the luminescent protein, Eu@AFt, with a maximum excitation peak at 420 nm and a long luminescence lifetime of 365 μs was fabricated and successfully used for visible-light-excited time-resolved luminescence cell imaging. Moreover, by conjugating a mitochondria-targeting molecule, (5-N-succinimidoxy-5-oxopentyl)-triphenylphosphonium bromide (SPTPP), onto the surface of Eu@AFt, a mitochondria-specifically-tracking luminescent probe, Eu@AFt-SPTPP, was further prepared and used for visible-light-excited confocal luminescence microscopy imaging to visualize the mitochondria of living cells.

Fluorescent protein (FP)-based biosensors have revolutionized the ability of researchers to monitor enzyme activities in live cells. While the basic design principles for FP-based biosensors are well established, first-generation biosensor constructs typically suffer from relatively low fluorescence responses that limit their general applicability. The protein engineering efforts required to substantially improve the biosensor responses are often both labour and time intensive. Here we report the application of a high throughput bacterial colony screen for improving the response of kinase biosensors. This effort led to the development of a second-generation cyclin B1-CDK1 biosensor with a 4.5-fold greater response than the first-generation biosensor.

Fluorescent proteins are essential tools in biological research, ranging from the study of individual biological components to the interrogation of complex cellular systems. Fluorescent protein derived biosensors are increasingly applied to the study of biological molecules and events in living cells. The present review focuses on a specific class of fluorescent protein biosensors in which a genetically installed unnatural amino acid (UAA*) acts as the sensing element. Upon direct interaction with the analyte of interest, the chemical and/or physical properties of UAA* are altered, which triggers fluorescence property changes of the biosensor and generates readouts. In comparison to mutagenesis approaches within the standard genetic code, introduction of UAA*s with a unique functionality and chemical reactivity could broaden the scope of analytes and improve the specificity of biosensors. Nonconventional functional groups in fluorescent proteins enable sensor designs that are not readily accessible using the common twenty amino acids. Recent reports of UAA*-containing fluorescent protein sensors serve as excellent examples for the utility of such sensor design. We envisage that the integration of the two powerful chemical biology tools, fluorescent protein sensors and genetic incorporation of UAA*s, will lead to novel biosensors that can expand and deepen current understanding of cellular processes.

Single molecule localization-based optical nanoscopy was introduced in 2006, surpassing traditional diffraction-limited resolutions by an order of magnitude. Seven years later, this superresolution technique is continuing to follow a trend of increasing popularity and pervasiveness, with the proof-of-concept work long finished and commercial implementations now available. However one important aspect that tends to become lost in translation is the importance of proper sample preparation, with very few resources addressing the considerations that must be made when preparing samples for imaging with single molecule level sensitivity. Presented here is a an in-depth analysis of all aspects of sample preparation for single molecule superresolution, including both live and fixed cell preparation, choice of fluorophore, fixation and staining techniques, and imaging buffer considerations.

The application of two-photon activation of photoactivatable fluorescent proteins is limited by a lack of information about two-photon activation rates. Here we present rates for the commonly used photoactivatable proteins PAmCherry, PAmKate and PA-GFP at different wavelengths using a novel method that allows us to determine the two-photon activation rates directly, independent of any reference data, with microscopic sample volumes. We show that PAmCherry features the highest rates of the tested proteins at 700 nm activation wavelength followed by PAmKate. Towards longer wavelengths, two-photon activation rates decrease for all three proteins. For PAmCherry, our data contradicts an activation model relying solely on two-photon activation and suggests additional activation pathways requiring at least two absorption steps. Our method is readily expandable to other photoactivatable fluorescent molecules. The presented results allow optimization of experimental conditions in spectroscopic and imaging techniques such as super-resolution fluorescence microscopy.

The transcriptional regulator QsrR is converted into a genetically encoded fluorescent probe capable of ratiometric monitoring of quinones in living cells with high sensitivity and selectivity.

In this paper, we demonstrate that a functional, portable device for the growth of bacteria or amplification of bacteriophage can be created using simple materials. These devices are comprised of packing tape, sheets of paper patterned by hydrophobic printer ink, and a polydimethyl siloxane (PDMS) membrane, which is selectively permeable to oxygen but non-permeable to water. These devices supply bacteria with oxygen and prevent the evaporation of media for a period over 48 h. The division time of E. coli and the amplification of the phage M13 in this device are similar to the rates measured on agar plates and in shaking cultures. The growth of bacteria with a fluorescent mCherry reporter can be quantified using a flatbed scanner or a cell phone camera. Permeating devices with commercial viability dye (PrestoBlue) can be used to detect low copy number of E. coli (1-10 CFU in 100 μL) and visualize microorganisms in environmental samples. The platform, equipped with bacteria that carry inducible mCherry reporter could also be used to quantify the concentration of the inducer (here, arabinose). Identical culture platforms can, potentially, be used to quantify the induction of gene expression by an engineered phage or by synthetic transcriptional regulators that respond to clinically relevant molecules. The majority of measurement and fabrication procedures presented in this report have been replicated by low-skilled personnel (high-school students) in a low-resource environment (high-school classroom). The fabrication and performance of the device have also been tested in a low-resource laboratory setting by researchers in Nairobi, Kenya. Accordingly, this platform can be used as both an educational tool and as a diagnostic tool in low-resource environments worldwide.

The real-time monitoring of the caspase cascade in cancer cells during apoptosis was performed using various caspase substrate-linked fluorescent proteins-conjugated gold nanoparticles as a new imaging probe.

Imaging technologies developed in the early 20th century achieved contrast solely by relying on macroscopic and morphological differences between the tissues of interest and the surrounding tissues. Since then, there has been a movement toward imaging at the cellular and molecular level in order to visualize biological processes. This rapidly growing field is known as molecular imaging. In the last decade, many methodologies for imaging proteins have emerged. However, most of these approaches cannot be extended to imaging beyond the proteome. Here, we highlight some of the recently developed technologies that enable imaging of non-proteinaceous molecules in the cell: lipids, signalling molecules, inorganic ions, glycans, nucleic acids, small-molecule metabolites, and protein post-translational modifications such as phosphorylation and methylation.

To understand how the protein achieves fluorescence, the isomerization mechanism of the HcRed chromophore is studied both under vacuum and in the solvated red fluorescent protein. Quantum mechanical (QM) and quantum mechanical/molecular mechanical (QM/MM) methods are applied both for the ground and the first excited state. The photoinduced processes in the chromophore mainly involve torsions around the imidazolinone-bridge bond (τ) and the phenoxy-bridge bond (φ). Under vacuum, the isomerization of the cis-trans chromophore essentially proceeds by τ twisting, while the radiationless decay requires φ torsion. By contrast, the isomerization of the cis-trans chromophore in HcRed occurs via simultaneous τ and φ twisting. The protein environment significantly reduces the barrier of this hula twist motion compared with vacuum. The excited-state isomerization barrier via the φ rotation of the cis-coplanar conformer in HcRed is computed to be significantly higher than that of the trans-non-coplanar conformer. This is consistent with the experimental observation that the cis-coplanar-conformation of the chromophore is related to the fluorescent properties of HcRed, while the trans-non-planar conformation is weakly fluorescent or non-fluorescent. Our study shows how the protein modifies the isomerization mechanism, notably by interactions involving the nearby residue Ile197, which keeps the chromophore coplanar and blocks the twisting motion that leads to photoinduced radiationless decay.