Search

Developing biostimulants is a promising approach for sustainable agriculture under a saline environment. Thymol is a plant-derived compound with a potential antioxidative capacity. However, little is known about whether and how the antioxidative property of thymol plays a role in inducing plant tolerance against abiotic stresses. Here, we find that thymol induces saline tolerance in Chinese cabbage seedlings via enhancing the antioxidative capacity. Treatment with NaCl (100 mM) decreased the seedling fresh weight by 59.9% as compared to a control. Thymol at 20 μM showed the greatest effect on promoting seedling growth under saline stress, with the seedling fresh weight being increased by 71.0% as compared to NaCl treatment. Thymol remarkably decreased the overaccumulation of ROS (hydrogen peroxide and a superoxide radical); cell membrane damage (evaluated by lipid oxidation, membrane integrity, and relative conductivity); and cell death in seedlings under saline stress. Thymol induced three antioxidative systems to lower the ROS level in salt-treated seedlings. First, thymol remarkably activated a set of antioxidative enzymes, such as SOD (superoxide dismutase), APX (ascorbate peroxidase), CAT (catalase), and POD (peroxidase). Second, thymol balanced the cellular redox status by increasing the ratio of AsA/DHA (ascorbic acid/dehydroascorbic acid) and GSH/GSSG (glutathione/oxidized glutathione). Third, thymol significantly enhanced the level-two kinds of antioxidants (total phenol and flavonoid). All of these physiological responses were observed in both the shoots and the roots. In sum, thymol deploys multiple antioxidative systems to help Chinese cabbage seedlings against saline stress. Such findings suggest that thymol has great potential to be developed as a novel biostimulant enhancing crop tolerance against saline stress.

Gray mold infected with Botrytis cinerea frequently appears on fruits and vegetables throughout the supply chain after harvest, leading to economic losses. Biological control of postharvest disease with phytochemicals is a promising approach. CA (cinnamaldehyde) is a natural phytochemical with medicinal and antimicrobial activity. This study evaluated the effect of CA in controlling B. cinerea on fresh pepper fruit. CA inhibited B. cinerea growth in vitro significantly in a dose- (0.1–0.8 mM) and time-dependent (6–48 h) manner, with an EC50 (median effective concentration) of 0.5 mM. CA induced the collapse and breakdown of the mycelia. CA induced lipid peroxidation resulting from ROS (reactive oxygen species) accumulation in mycelia, further leading to cell leakage, evidenced by increased conductivity in mycelia. CA induced mycelial glycerol accumulation, resulting in osmotic stress possibly. CA inhibited sporulation and spore germination resulting from ROS accumulation and cell death observed in spores. Spraying CA at 0.5 mM induced a defense response in fresh pepper fruits, such as the accumulation of defense metabolites (flavonoid and total phenols) and an increase in the activity of defense enzymes (PAL, phenylalanine ammonia lyase; PPO, polyphenol oxidase; POD, peroxidase). As CA is a type of environmentally friendly compound, this study provides significant data on the activity of CA in the biocontrol of postharvest gray mold in peppers.

Selenium (Se) is involved in the growth and development of plants. More importantly, Se from plant foods is a primary source of Se intake for humans and animals. Improving the Se content in vegetables through biofortification is an effective way to solve the hidden hunger induced by Se deficiency. This study demonstrated the effect of different exogenous Se application concentrations on the growth, antioxidative capacity, and nutritional quality of purple lettuce (Lactuca sativa var. crispa L. “Purple Rome”) at the seedling stage. The low Se application concentration (≤8 μM) significantly promoted the lettuce seedling growth. Conversely, the high Se application concentration (16 μM) inhibited the seedling growth and overproduced the reactive oxygen species in lettuce root tips, which caused oxidative damage to membrane lipids and cell death. Furthermore, the enzyme activities and gene expression of the antioxidant enzymes, superoxide dismutase-peroxidase, and catalase, were significantly increased under exogenous Se application. The exogenous Se application significantly increased the accumulation of nutrients in purple lettuce at the seedling stage. Remarkably, the exogenous Se application concentrations were significantly positively related to the Se and anthocyanin contents. The gene expression levels of chalcone synthase were positively correlated with the anthocyanin contents under exogenous Se application. This study contributes to the role of Se in lettuce growth and provides a reference for producing high-quality purple lettuce rich in Se and anthocyanins.

Fusarium oxysporum f. sp. niveum (FON) causes watermelon wilt that is one of the major disease-causing yield losses of watermelon. Sustainable development of agriculture requires controlling watermelon wilt disease with good environmental performance. One important approach is to identify environmental-friendly compounds with inhibitory activity against FON. Thymol is a plant-derived compound that is safe for ecology. Little is known about the application of thymol in agriculture. In this study, we studied the inhibitory activity of thymol against FON by using morphological, physiological, and histochemical approaches. Thymol significantly inhibited colony diameter of FON in a dose-dependent manner, with EC50 at 21 µg/mL. Thymol at 10, 21, and 35 µg/mL decreased the fresh weight of FON mycelia by 29.0%, 50.6%, and 69.5%, respectively. Microscopic observation revealed irregular damage and loss of shape of mycelia upon thymol exposure. Thymol induced the accumulation of superoxide radical in mycelial cells and accompanied increased activity of antioxidative enzymes (SOD, superoxide dismutase; CAT, catalase). Thymol induced membrane permeability was indicated by lipid peroxidation and electrolyte leakage (increased by 29–58%) in mycelial cells. These results suggested that thymol induced oxidative damage in mycelia, which may be one of the possible reasons for thymol-induced mycelial cell death observed with fluorescent detection. Thymol decreased the production of conidia and inhibited the germination of conidia. Thymol induced superoxide radical accumulation, lipid peroxidation, and cell death in conidia as well. All of these results revealed the inhibitory activity of thymol against FON, which may have resulted from the superoxide radical-induced oxidative injury in both conidia and mycelia of FON.

Functionalization of experimental HIV-1 virus-like particle vaccines with heterologous T helper epitopes (T helper VLPs) can modulate the humoral immune response via intrastructural help (ISH). Current advances in the conjugation of native-like HIV-1 envelope trimers (Env) onto liposomes and encapsulation of peptide epitopes into these nanoparticles renders this GMP-scalable liposomal platform a feasible alternative to VLP-based vaccines. In this study, we designed and analyzed customizable Env-conjugated T helper liposomes. First, we passively encapsulated T helper peptides into a well-characterized liposome formulation displaying a dense array of Env trimers on the surface. We confirmed the closed pre-fusion state of the coupled Env trimers by immunogold staining with conformation-specific antibodies. These peptide-loaded Env-liposome conjugates efficiently activated Env-specific B cells, which further induced proliferation of CD4+ T cells by presentation of liposome-derived peptides on MHC-II molecules. The peptide encapsulation process was then quantitatively improved by an electrostatically driven approach using an overall anionic lipid formulation. We demonstrated that peptides delivered by liposomes were presented by DCs in secondary lymphoid organs after intramuscular immunization of mice. UFO (uncleaved prefusion optimized) Env trimers were covalently coupled to peptide-loaded anionic liposomes by His-tag/NTA(Ni) interactions and EDC/Sulfo-NHS crosslinking. EM imaging revealed a moderately dense array of well-folded Env trimers on the liposomal surface. The conformation was verified by liposomal surface FACS. Furthermore, anionic Env-coupled T helper liposomes effectively induced Env-specific B cell activation and proliferation in a comparable range to T helper VLPs. Taken together, we demonstrated that T helper VLPs can be substituted with customizable and GMP-scalable liposomal nanoparticles as a perspective for future preclinical and clinical HIV vaccine applications. The functional nanoparticle characterization assays shown in this study can be applied to other systems of synthetic nanoparticles delivering antigens derived from various pathogens.

Zircon Hf-isotopic mapping can be regarded as a useful tool for evaluating the coupling relationship between lithospheric structure and metallic mineralization. Hence, this method shows important significance for mineral prediction. To explore this potential, the published granite zircon Hf isotope data from the Sanjiang Tethyan Orogen were systematically compiled. This study uses the Kriging weighted interpolation in the Mapgis software system to contour Hf isotopes, revealing a relation between the crustal structure and metallogenesis. The mapping results suggest that the Changning–Menglian suture zone is the boundary between ancient and juvenile crust, viz., the western terranes have ancient crust attributes, whereas the eastern terranes exhibit the properties of new juvenile crust. In addition, this study also found that the mineralization and element types in the Sanjiang Tethyan Orogen have a coupling relationship with the crustal structure. The distribution of porphyry Cu-Mo-Au deposits is mainly controlled by the new juvenile crust, whereas the magmatic-hydrothermal Sn-W and porphyry Mo-W(-Cu) deposits are closely related to the reworked ancient crust. The results of zircon Hf isotope mapping prove that the formation and spatial distribution of deposits are related to the composition and properties of the crust. Hf isotope mapping can reveal the regional metallogenic rules and explore metallogenic prediction and metallogenic potential evaluation.

The Oligocene to Miocene Baiyangping Cu–Co and Pb–Zn mineralization was deposited during the collision of the India and Asia continents. The mineralization is hosted in veins in faulted carbonate and clastic rocks, which act as fluid pathways. A detailed fluid-inclusion analysis and C–O–S isotopic study are reported, focusing on the origin of the mineralizing fluids and mineralizing processes. The microthermometry of fluid inclusions hosted in quartz and carbonates indicate that the fluid peak temperature for both Cu–Co and Pb–Zn mineralizations ranges from 160 to 200 °C and from 120 to 160 °C, respectively. During these metallogenic hydrothermal events, salinity evolved from 2.7 wt% NaCl equiv to 24.8 wt% NaCl equiv. The δ34S values measured on sphalerite and tennantite range from +5.2‰ to +9.5‰, which indicates that sulfur originated from a reservoir characterized by thermochemical sulfate reduction (TSR). The C–O isotopic values obtained from the carbonate samples suggest that the fluid mainly originates from basinal brines. The combination of C and S isotopic values of the Cu–Co and Pb–Zn mineralization indicate the sedimentary source of the basin. Mineralization is controlled by faults, thermochemical sulfate reduction, and the physicochemical conditions of the fluid.

In this work, the tensile-shear mechanical behaviors of friction stir spot weld and adhesive hybrid joint were performed from both numerical and experimental viewpoints. Weld through (WT) and flow in (FI) processes were studied in this research. The focus was to evaluate joint defects, tensile-shear failure load (TSFL), failure energy, failure mode and stress distribution of the joint. In FI joints, keyhole and hook defects appeared in the weld zone and the areas of material removed from the base metal were filled with adhesive. In the WT joints, the adhesive layer close to the weld zone was carbonized due to the welding heat. Meanwhile, under the rotating movement of welding tool, the adhesive impurities entered the stirring zone (SZ) and heat affected zone (HAZ) of the weld, which decreased mechanical performances of WT joints. Compared to the friction stir spot welding (FSSW) joint, the TSFL value, stiffness and failure energy of FI joint were increased by 2.7, 1.1 and 8.14 times, respectively. In order to study the stress distribution of the joints, a finite element (FE) model, which considered the weld structure and mechanical properties of weld regions, was implemented. Moreover, the adhesive layer was simplified by the cohesive zone model (CZM). FE results show that the FI process effectively decreases the stress concentration of the weld edge from 243.09 to 15.5 MPa, under the 2 kN tensile load. The weld can block the adhesive crack propagation, and the adhesive optimized the stress distribution of FI joints through a synergistic effect. So, the use of FI process for aluminum alloy connection is strongly recommended, especially in crucial structure areas.