Search

Environmental DNA (eDNA) extracted from the gut contents of filter feeders can be used to identify biodiversity in aquatic ecosystems. In this study, we used eDNA from the gut contents of the Asian clam Corbicula fluminea to examine biodiversity within estuarine ecosystem. Field sampling was conducted at three points in the Nakdong River Estuary, which is characterised by closed estuarine features resulting from the presence of an estuarine barrage. The collected C. fluminea samples were dissected to separate the gut contents, and the extracted eDNA was amplified using 18S V9 primer targeting all eukaryote-derived DNA. The amplified DNA was sequenced using a next-generation sequencing (NGS) technique, and a BLASTn search was performed based on the National Centre for Biotechnology Information (NCBI) database for taxa identification. We obtained 23 unique operational taxonomic units (OTUs), including fish (approximately 8.70%), copepods (approximately 17.39%), and green algae (approximately 21.74%), representing a wide range of habitats. Furthermore, 8 out of the 20 families were identified through comparisons with reference data from conventional field surveys, and the OTUs of elusive migratory fish were detected. The results support the application of C. fluminea as an eDNA sampler for supplementary biodiversity monitoring.

Chum salmon (Oncorhyncus keta) is a cold-water species reported to migrate within a wide range of habitats, including Korea, Japan, North America, and Russia, playing important roles in the river–sea nutrient cycle and food web. However, research on this species has not been widely performed in South Korea owing to its geographical location at the southern edge of migration. In this study, we analyzed the spatial distribution and morphological characteristics of chum salmon migrating to South Korea using the length–weight relationship. We also analyzed 3 years of catch, sex ratio, and individual information (total length (cm), weight (kg), n = 4400) from ten rivers (eight in the East coast and two on the South coast) with a total of 17 years of water quality and the distance they traveled (n = 50) using multivariate analysis. As a result, we discovered a trend of less migration in the southern part of South Korea for all individuals migrating to South Korea. Furthermore, the weight ratio of males/females was significantly different (p < 0.05). Based on the length–weight relationship analysis, the a and b values were between 0.0011 and 0.038 and 2.65 and 3.49, respectively. In the correlation analysis, catch is negatively correlated with distance traveled and temperature (p < 0.05), and positively correlated with pH, dissolved oxygen, distance, and female ratio (p < 0.05). This is possibly the result of differences in water quality during early life stages or the presence of an estuarine barrage at the mouth of the Nakdong River. This research may be used as fundamental distribution and morphological variations of chum salmon in South Korea.

Tangential-firing boilers develop large swirling fireballs by using pulverized coal and air from the corners of the burner zone. During operation, however, the boiler may experience an uneven air supply between corners; this deforms the fireball, raising various issues concerning performance and structural safety. This study investigated the characteristic boiler performance and the role of burner tilting in a 500 MWe boiler with secondary air (SA) in two corners that are up to 1.9 times larger than those in the other corners. Computational fluid dynamics simulations with advanced coal combustion sub-models were employed with the following two sets of cases: (i) six cases of actual operation to validate the modeling and (ii) sixteen cases for the parametric study of SA flow ratio and burner tilt between −15° and +26°. The results showed that the uneven SA supply deteriorated the boiler performance in various aspects and the burner tilt can be used to alleviate its impact. With a larger SA supply from the left wind box, the mass flow, heat absorption, and O2 concentration were larger in the right half of the heat exchanger sections owing to the rotating flow. The corresponding imbalance in the reaction stoichiometry increased the peak temperature entering the tube bundles by up to 60 °C and NO emissions by 6.7% as compared with normal operations. The wall heat absorption was up to 19% larger on the right and front walls. The high burner tilt of +26° helped alleviate the impact of uneven SA supply on the heat distribution and uniformity of the flow pattern and temperature, whereas a +15° burner tilt was the least favorable.

The gut bacterial communities of copepods can affect metabolic processes, and consequently, their activity can be related to the release of organic substances to the environment. Hence, they are important for organic matter cycling in marine coast food webs. However, information regarding the variation in gut bacterial communities based on copepod species and environmental variations is limited. We analysed the differences in gut bacterial communities from dominant copepod species, i.e., Acartia hudsonica, Sinocalanus tenellus, and Pseudodiaptomus inopinus, in a brackish reservoir. The core bacteria among the copepod species and locations consisted of the following main operational taxonomic units (OTUs): Novosphingobium capsulatum and the family Rhodobacteraceae belonging to Alphaproteobacteria, which is abundant in seawater and freshwater aquatic ecosystems as a zooplankton-associated bacterial community. The bacterial community composition of each copepod (except the core species) showed high variability. The bacterial community diversity differed depending on the copepod species and the sites’ environmental conditions, especially salinity, e.g., compositional variations in the bacterial community of P. inopinus were high at sites with low salinity. Therefore, the gut bacterial community of each copepod species responds differently to the environment.

Sealing as a post treatment of anodized aluminum is required to enhance the corrosion resistance by filling nanopores, which allow the penetration of corrosive media toward the base aluminum. We designed a mixed sealing solution with nickel acetate and ammonium fluoride by modifying traditional nickel fluoride cold sealing. The concentration of mixed sealing solution affected the reaction rate of sealing and corrosion current density of anodized aluminum alloy. The higher concentration of mixed sealing solution improved the sealing rate, which was represented by a decrease of corrosion current density of anodized aluminum alloy. However, a mixed sealing solution with 2/3 concentration of general nickel fluoride sealing solution operated at room temperature showed the lowest corrosion current density compared to traditional methods (e.g., nickel fluoride cold sealing (NFCS) and nickel acetate hot sealing) and other mixed sealing solutions. Moreover, the mixed sealing solution with 2/3 concentration of general NFCS had a lower risk for over sealing, which increases the corrosion current density by excessive dissolution of anodic oxide. Therefore, the mixed sealing solution with optimized conditions designed in this work possibly provides a new method for enhancing the corrosion resistance of anodized aluminum alloys.

For renewable electricity production, biomass can fully displace coal in an existing power plant with some equipment modifications. Recently, a 125 MWe power plant burning mainly anthracite in Korea was retrofitted for dedicated wood pellet combustion with a change of boiler configuration from arch firing to wall firing. However, this boiler suffers from operational problems caused by high unburned carbon (UBC) contents in the bottom ash. This study comprises an investigation of some methods to reduce the UBC release while achieving lower NOx emissions. The computational fluid dynamics approach was established and validated for typical operating data. Subsequently, it was applied to elucidate the particle combustion and flow characteristics leading to the high UBC content and to evaluate the operating variables for improving the boiler performance. It was found that the high UBC content in the bottom ash was a combined effect of the poor fuel grindability and low gas velocity in the wide burner zone originating from the arch-firing boiler. This prevented the operation with deeper air staging for lower NOx emissions. Reducing the particle size to x emissions with deeper air staging while increasing the boiler efficiency.

We designed an experiment to analyze the gut content of Rotifera based on DNA barcoding and tested it on Asplanchna sp. in order to ensure that the DNA extracted from the rotifer species is from the food sources within the gut. We selected ethanol fixation (60%) to minimize the inflow effects of treated chemicals, and commercial bleach (the final concentration of 2.5%, for 210 s) to eliminate the extracellular DNA without damage to the lorica. Rotifers have different lorica structures and thicknesses. Therefore, we chose a pretreatment method based on Asplanchna sp., which is known to have weak durability. When we used the determined method on a reservoir water sample, we confirmed that the DNA fragments of Chlorophyceae, Diatomea, Cyanobacteria, and Ciliophora were removed. Given this result, Diatomea and cyanobacteria, detected from Asplanchna, can be considered as gut contents. However, bacteria were not removed by bleach, thus there was still insufficient information. Since the results of applying commercial bleach to rotifer species confirmed that pretreatment worked effectively for some species of rotifers food sources, in further studies, it is believed to be applicable to the gut contents analysis of more diverse rotifers species and better DNA analysis techniques by supplementing more rigorous limitations.

The nonlinearity and complexity of coastal ecosystems often cause difficulties when analyzing spatial and temporal patterns of ecological traits. Environmental DNA (eDNA) monitoring has provided an alternative to overcoming the aforementioned issues associated with classical monitoring. We determined aquatic community taxonomic composition using eDNA based on a meta-barcoding approach that characterizes the general ecological features in the Gwangyang Bay coastal ecosystem. We selected the V9 region of the 18S rDNA gene (18S V9), primarily because of its broad range among eukaryotes. Our results produced more detailed spatial patterns in the study area previously categorized (inner bay, main channel of the bay and outer bay) by Kim et al. (2019). Specifically, the outer bay zone was clearly identified by CCA using genus-level identification of aquatic organisms based on meta-barcoding data. We also found significant relationships between environmental factors. Therefore, eDNA monitoring based on meta-barcoding approach holds great potential as a complemental monitoring tool to identify spatial taxonomic distribution patterns in coastal areas.

Our study focuses on methodological comparison of plankton community composition in relation to ecological monitoring and assessment with data sampling. Recently, along with the advancement of monitoring techniques, metabarcoding has been widely used in the context of environmental DNA (eDNA). We examine the applicability of eDNA metabarcoding for effective monitoring and assessment of community composition, compared with conventional observation using microscopic identification in a coastal ecosystem, Gwangynag Bay in South Korea. Our analysis is based primarily on two surveys at a total of 15 study sites in early and late summer (June and September) of the year 2018. The results of our study demonstrate the similarity and dissimilarity of biological communities in composition, richness and diversity between eDNA metabarcoding and conventional microscopic identification. It is found that, overall, eDNA metabarcoding appears to provide a wider variety of species composition, while conventional microscopic identification depicts more distinct plankton communities in sites. Finally, we suggest that eDNA metabarcoding is a practically useful method and can be potentially considered as a valuable alternative for biological monitoring and diversity assessments.

The use of separated overfire air (SOFA) has become a standard technique of air staging for NOx reduction in the coal-fired boiler and can also be applied to existing boilers by retrofit. This study was to optimize the air distribution for the proposed SOFA installation in a 500 MWe tangential-firing boiler that has 20 identical units in Korea. Using computational fluid dynamics (CFD) incorporating advanced coal combustion submodels, the reference case was established in good agreement with the design data, and different flow ratios of burner secondary air, close-coupled OFA (CCOFA), and SOFA were evaluated. Increasing the total OFA ratio effectively suppressed NO formation within the burner zone but had a negative impact on the boiler performance. With moderate air staging, NO reduction became active between the CCOFA and SOFA levels and, therefore, the OFA distribution could be optimized for the overall boiler performance. For total OFA ratios of 25% and 30% with respective burner zone stoichiometric ratios of 0.847 and 0.791, increasing the SOFA ratio to 15% and 20%, respectively, was ideal for decreasing the unburned carbon release and ash slagging as well as NO emission. Too high or low SOFA ratios rapidly increased the unburned carbon because of inefficient mixing between the strong air jets and char particles. Based on these ideal cases, the actual air distribution can be adjusted depending on the coal properties such as the ash slagging propensity.

Vitellogenesis is a pivotal reproductive process of the yolk formation in crustaceans. Vitellogenin (VTG) is the precursor of main yolk proteins and synthesized by endogenous estrogens. The intertidal mud crab (Macrophthalmus japonicus) inhabits sediment and is a good indicator for assessing polluted benthic environments. The purpose of this study was to identify potential responses of M. japonicus VTG under environmental stresses caused by chemical pollutants, such as 1, 10, and 30 µg L−1 concentrations in di(2-ethylhexyl) phthalate (DEHP), bisphenol A (BPA) and irgarol. We characterized the M. japonicus VTG gene and analyzed the transcriptional expression of VTG mRNA in M. japonicus exposed to various chemicals and exposure periods. A phylogenetic analysis revealed that the M. japonicus VTG clustered closely with Eriocheir sinensis (Chinese mitten crab) VTG, in contrast with another clade that included the VTG ortholog of other crabs. The basal level of VTG expression was the highest in the hepatopancreas and ovaries, and tissues. VTG expression significantly increased in the ovaries and hepatopancreas after 24 h exposure to DEHP. Increased responses of VTG transcripts were found in M. japonicus exposed to DEHP and BPA for 96 h; however, VTG expression decreased in both tissues after irgarol exposure. After an exposure of 7 d, VTG expression significantly increased in the ovaries and hepatopancreas for all concentrations of all chemicals. These results suggest that the crustacean embryogenesis and endocrine processes are impaired by the environmental chemical pollutants DEHP, BPA, and irgarol.