Search

The aviation sector makes up 11% of all transportation emissions and is considered a "hard to abate" sector since, due to the long distances to be traveled, opportunities for electrification are rather limited. Therefore, since there are no alternatives to fuels, Sustainable Aviation Fuels (SAFs), or fuels produced from biomass, have recently been developed to reduce climate-changing emissions in the aviation sector. Using Life Cycle Assessment, this research evaluated the environmental compatibility of different SAF production routes from seven biomasses: four food feedstocks (Soybean, Palm, Rapeseed, and Camelina), one non-food feedstock (Jatropha curcas L.), and two wastes (Waste Cooking Oil, or WCO, and Tallow). The evaluation was carried out using SimaPro 9.5 software. The results showed that the two potentially most favorable options could be Camelina and Palma, as they show minimal environmental impacts in 4 and 7 out of 18 impact categories, respectively. Soybean, on the other hand, appears to be the least sustainable precursor. Considering GWP, SAF production could reduce the values compared to fossil fuel by 2.8–3.6 times (WCO), 1.27–1.66 times (Tallow), 4.6–5.8 times (Palm), 3.4–4.3 times (Jatropha), 1.05–1.32 times (Rapeseed), and 4.36–5.5 times (Camelina), demonstrating the good environmental impact of these pathways. Finally, the sensitivity analysis showed that SAF production from waste could be an environmentally friendly option, with rather low environmental impacts, in the range of 5.13 g CO2 eq/MJ for Tallow and 3.12 g CO2 eq/MJ for WCO. However, some of the energy would have to come from sustainable energy carriers such as biomethane and renewable sources such as photovoltaic energy. [ABSTRACT FROM AUTHOR]

The high rate of rejection and failure of orthopedic implants is primarily attributed to incomplete osseointegration and stress at the implant-to-bone interface due to significant differences in the mechanical properties of the implant and the surrounding bone. Various surface treatments have been developed to enhance the osteoconductive properties of implants. The aim of this work was the in vitro characterization of titanium alloy modified with a nanocrystalline hydroxyapatite surface layer in relative comparison to unmodified controls. This investigation focused on the behavior of the surface treatment in relation to the physiological environment. Moreover, the osteogenic response of human osteoblasts and adipose stem cells was assessed. Qualitative characterization of cellular interaction was performed via confocal laser scanning microscopy focusing on the cell nuclei and cytoskeletons. Filipodia were assessed using scanning electron microscopy. The results highlight that the HA treatment promotes protein adhesion as well as gene expression of osteoblasts and stem cells, which is relevant for the inorganic and organic components of the extracellular matrix and bone. In particular, cells grown onto HA-modified titanium alloy are able to promote ECM production, leading to a high expression of collagen I and non-collagenous proteins, which are crucial for regulating mineral matrix formation. Moreover, they present an impressive amount of filipodia having long extensions all over the test surface. These findings suggest that the HA surface treatment under investigation effectively enhances the osteoconductive properties of Ti6Al4V ELI. [ABSTRACT FROM AUTHOR]

As of 2035, the European Union has ratified the obligation to register only zero-emission cars, including ultra-low-emission vehicles (ULEVs). In this context, electric mobility fits in, which, however, presents the critical issue of the over-exploitation of critical raw materials (CRMs). An interesting solution to reduce this burden could be the so-called second life, in which batteries that are no longer able to guarantee high performance in vehicles are used for other applications that do not require high performance, such as so-called stationary systems, effectively avoiding new over-exploitation of resources. In this study, therefore, the environmental impacts of second-life lithium iron phosphate (LiFePO4) batteries are verified using a life cycle perspective, taking a second life project as a case study. The results show how, through the second life, GWP could be reduced by −5.06 × 101 kg CO2 eq/kWh, TEC by −3.79 × 100 kg 1.4 DCB eq/kWh, HNCT by −3.46 × 100 kg 1.4 DCB eq/kWh, −3.88 × 100 m2a crop eq/kWh, and −1.12 × 101 kg oil eq/kWh. It is further shown how second life is potentially preferable to other forms of recycling, such as hydrometallurgical and pyrometallurgical recycling, as it shows lower environmental impacts in all impact categories, with environmental benefits of, for example, −1.19 × 101 kg CO2 eq/kWh (compared to hydrometallurgical recycling) and −1.50 × 101 kg CO2 eq/kWh (pyrometallurgical recycling), −3.33 × 102 kg 1.4 DCB eq/kWh (hydrometallurgical), and −3.26 × 102 kg 1.4 DCB eq/kWh (pyrometallurgical), or −3.71 × 100 kg oil eq/kWh (hydrometallurgical) and −4.56 × 100 kg oil eq/kWh (pyrometallurgical). By extending the service life of spent batteries, it may therefore be possible to extract additional value while minimizing emissions and the over-exploitation of resources. [ABSTRACT FROM AUTHOR]

Acheta domesticus (house cricket) has been recently introduced into the official European list of novel foods, representing an alternative and sustainable food source. Up to now, the chemical characterization of this edible insect has been focused only on specific classes of compounds. Here, three production batches of an A. domesticus powder were investigated by means of a multimethodological approach based on NMR, FT-ICR MS, and GC-MS methodologies. The applied analytical protocol, proposed for the first time in the study of an edible insect, allowed us to identify and quantify compounds not previously reported in crickets. In particular, methyl-branched hydrocarbons, previously identified in other insects, together with other compounds such as citrulline, formate, γ-terpinene, p-cymene, α-thujene, β-thujene, and 4-carene were detected. Amino acids, organic acids, and fatty acids were also identified and quantified. The improved knowledge of the chemical profile of this novel food opens new horizons both for the use of crickets as a food ingredient and for the use of extracts for the production of new formulations. In order to achieve this objective, studies regarding safety, biological activity, bioaccessibility, and bioavailability are needed as future perspectives in this field. [ABSTRACT FROM AUTHOR]

Several nanomedicine based medicinal products recently reached the market thanks to the drive of the COVID-19 pandemic. These products are characterized by criticality in scalability and reproducibility of the batches, and the manufacturing processes are now being pushed towards continuous production to face these challenges. Although the pharmaceutical industry, because of its deep regulation, is characterized by slow adoption of new technologies, recently, the European Medicines Agency (EMA) took the lead in pushing for process improvements using technologies already established in other manufacturing sectors. Foremost among these technologies, robotics is a technological driver, and its implementation in the pharma field should cause a big change, probably within the next 5 years. This paper aims at describing the regulation changes mainly in aseptic manufacturing and the use of robotics in the pharmaceutical environment to fulfill GMP (good manufacturing practice). Special attention is therefore paid at first to the regulatory aspect, explaining the reasons behind the current changes, and then to the use of robotics that will characterize the future of manufacturing especially in aseptic environments, moving from a clear overview of robotics to the use of automated systems to design more efficient processes, with reduced risk of contamination. This review should clarify the regulation and technological scenario and provide pharmaceutical technologists with basic knowledge in robotics and automation, as well as engineers with regulatory knowledge to define a common background and language, and enable the cultural shift of the pharmaceutical industry. [ABSTRACT FROM AUTHOR]

Clay minerals are historically among the most used materials with a wide variety of applications. In pharmaceutical and biomedical fields, their healing properties have always been known and used in pelotherapy and therefore attractive for their potential. In recent decades, the research has therefore focused on the systematic investigation of these properties. This review aims to describe the most relevant and recent uses of clays in the pharmaceutical and biomedical field, especially for drug delivery and tissue engineering purposes. Clay minerals, which are biocompatible and non-toxic materials, can act as carriers for active ingredients while controlling their release and increasing their bioavailability. Moreover, the combination of clays and polymers is useful as it can improve the mechanical and thermal properties of polymers, as well as induce cell adhesion and proliferation. Different types of clays, both of natural (such as montmorillonite and halloysite) and synthetic origin (layered double hydroxides and zeolites), were considered in order to compare them and to assess their advantages and different uses. [ABSTRACT FROM AUTHOR]

Bentonite or palygorskite-based hydrogels have recently been suggested as a strategy to increase bioavailability and control the retention and release of therapeutic candidates. In this work, clay-based hydrogels loaded with diclofenac acid nanocrystals have been successfully designed and developed. The aim was to improve diclofenac solubility, its dissolution rate and to enhance its local bioavailability after topical application. For this purpose, diclofenac acid nanocrystals were prepared by wet media milling technology and then loaded into inorganic hydrogels based on bentonite and/or palygorskite. Diclofenac acid nanocrystals were characterized by morphology, size, and zeta potential. Moreover, rheological behavior, morphology, solid state, release studies, and in vitro skin penetration/permeation of diclofenac acid nanocrystals-loaded hydrogels were performed. The hydrogels were characterized by a crystalline structure, and demonstrated that the inclusion of diclofenac in clay-based hydrogels resulted in an increased thermal stability. The presence of both palygorskite and bentonite reduced nanocrystal mobility, and consequently its release and penetration into the skin. On the other hand, bentonite- or palygorskite-based hydrogels revealed great potential as an alternative strategy to enhance topical bioavailability of DCF nanocrystals, enhancing their penetration to the deeper skin layers. [ABSTRACT FROM AUTHOR]

Tendon disorders are common medical conditions that could lead to significant disability, pain, healthcare costs, and a loss of productivity. Traditional approaches require long periods of treatment, and they largely fail due to the tissues weakening and the postoperative alterations of the normal joint mechanics. To overcome these limitations, innovative strategies for the treatment of these injuries need to be explored. The aim of the present work was the design of nano-fibrous scaffolds based on poly(butyl cyanoacrylate) (PBCA), a well-known biodegradable and biocompatible synthetic polymer, doped with copper oxide nanoparticles and caseinphosphopeptides (CPP), able to mimic the hierarchical structure of the tendon and to improve the tissue healing potential. These were developed as implants to be sutured to reconstruct the tendons and the ligaments during surgery. PBCA was synthetized, and then electrospun to produce aligned nanofibers. The obtained scaffolds were characterized for their structure and physico-chemical and mechanical properties, highlighting that CuO and CPP loading, and the aligned conformation determined an increase in the scaffold mechanical performance. Furthermore, the scaffolds loaded with CuO showed antioxidant and anti-inflammatory properties. Moreover, human tenocytes adhesion and proliferation to the scaffolds were assessed in vitro. Finally, the antibacterial activity of the scaffolds was evaluated using Escherichia coli and Staphylococcus aureus as representative of Gram-negative and Gram-positive bacteria, respectively, demonstrating that the CuO-doped scaffolds possessed a significant antimicrobial effect against E. coli. In conclusion, scaffolds based on PBCA and doped with CuO and CPP deserve particular attention as enhancers of the tendon tissue regeneration and able to avoid bacterial adhesion. Further investigation on the scaffold efficacy in vivo will assess their capability for enhancing the tendon ECM restoration in view of accelerating their translation to the clinic. [ABSTRACT FROM AUTHOR]

Rice is the most widely used cereal for human consumption, attributing its production as one of the most important activities for the global population. Therefore, given its economic and nutritional value, assessing the sustainability of this production process could be worth noting. In this regard, this research aims to investigate the most recent literature related to Life Cycle Assessment (LCA) of rice primary production, to clarify the extent to which Life Cycle Thinking (LCT) and thus the three pillars of sustainability have been applied in the rice sector, as well as to highlight possible research gaps. Thus, 40 articles (2012–2022) were analyzed. The main research gaps that were found were, firstly, that there was a lesser tendency to consider multiple functional units, highlighting how little multifunctionality is considered. As to be expected, there was also a great difference in methodological choices, which often leads to a great variability of results, making evaluations and comparisons of impacts uncertain. These were also highly dependent on soil and climate conditions in the various countries, which could in turn affect input utilization, and results. The study of the impacts of primary rice production was then addressed by a few countries, among which some of the largest producers were absent, while the least considered aspects were related to the depletion of abiotic resources and the promotion of organic farming. Finally, sustainability assessments in rice production had little focus on the socio-economic dimension, showing how little LCT is considered. Therefore, based on this consideration, a Social Life Cycle Assessment was integrated into the study, the results of which show that the countries with medium to high social impacts could be India, Sri Lanka, Thailand, and Bangladesh. [ABSTRACT FROM AUTHOR]

Insects, especially crickets, have been proposed as a novel source of nutrients in human nutrition since they possess bioactive molecules, including high protein content, lipids, chitin, vitamins and minerals. In this work, the nutritional and functional properties of a novel Italian spray-dried (SD) cricket powder were evaluated. The powder was characterized by physico–chemical properties (morphology, size distribution, solid state, thermal profiles, and surface zeta potential), and antioxidant properties. Moreover, preclinical properties (cytocompatibility and pro-inflammatory immune response) were assessed. The powder was characterized by microparticle structure with bulges and rough surfaces, showing distinctive antioxidant properties. The preclinical results suggested that the SD crickets were biocompatible towards Caco-2 and macrophages without immune response, representing an interesting material for the food industry that could provide health benefits in addition to the basic nutritional value of traditional foods. [ABSTRACT FROM AUTHOR]

The poor water solubility of a significant number of active pharmaceutical ingredients (API) remains one of the main challenges in the drug development process, causing low bioavailability and therapeutic failure of drug candidates. Curcumin is a well-known Biopharmaceutics Classification System (BCS) class IV drug, characterized by lipophilicity and low permeability, which hampers topical bioavailability. Given these premises, the aim of this work was the design and the development of curcumin nanocrystals and their incorporation into natural inorganic hydrogels for topical application. Curcumin nanocrystals were manufactured by the wet ball milling technique and then loaded in clay-based hydrogels. Bentonite and/or palygorskite were selected as the inorganic gelling agents. Curcumin nanocrystal-loaded hydrogels were manufactured by means of a homogenization process and characterized with respect to their chemico-physical properties, in vitro release, antioxidant activity and skin permeation. The results highlighted that the presence of bentonite provided an increase of curcumin skin penetration and simultaneously allowed its radical scavenging properties, due to the desirable rheological characteristics, which should guarantee the necessary contact time of the gel with the skin. [ABSTRACT FROM AUTHOR]

Owing to its important nutritional features, extra virgin olive oil (EVOO) is one of the world's highest-value products, mostly manufactured in Mediterranean countries. However, its production exerts several negative environmental effects, mainly related to the agricultural phase (and the use of fertilizers, pesticides, etc.) and waste management. Olive oil can be extracted from the olive paste using different extraction systems, including pressure, centrifugation, and percolation. In particular, EVOO by-product composition strictly depends on the extraction technologies, and two- or three-phase centrifugal extraction methods are usually employed. Therefore, due to olive oil's economic value, it might be useful to investigate its environmental impacts, to advise sustainable supply chain models. In this context, a valuable tool for assessing the product's environmental compatibility is the Life Cycle Assessment, which is part of a broader Life Cycle Thinking philosophy. This research focused on evaluating the EVOO environmental impact by comparing two- and three-phases extraction processes. Additionally, two scenarios, (i.e., composting and bio-gasification), were proposed to assess the best valorisation strategy for the produced pomace. The results showed that the two-step extraction process was more sustainable than the three-step one in nine out of nine considered impact categories. By milling 1000 kg of olives, the first technology approximately produces 212 kg CO2 eq, the latter 396 kg CO2 eq. Finally, pomace valorisation by bio-gasification was found as the best recovery process, able to confer greater environmental benefit than composting. [ABSTRACT FROM AUTHOR]

Trademarks are distinctive signs designed to promote and enhance the products/services of companies. In recent years, the concept of quality has asserted growing interest, especially among enterprises, aiming to promote consumers by creating distinctive marks. In Italy, in 2021, the number of filled quality trademarks for products and services will amount to about 81. Through the "Decreto Crescita", Italy supported Italian companies to limit their delocalization overseas. In this regard, the historical mark of national interest was established, from which Italian companies with a trademark filed for at least 50 years can benefit. Therefore, the study aimed at evaluating two different types of trademarks, quality marks and historical marks, highlighting the main aspects that characterize these two marks as a function of the standards that distinguish them from the most common trademarks. For this purpose, the study focused on evaluating historical brands in Italy to promote their strategic importance and enhance the temporal continuity of the marks. These were considered a new marketing tool to promote know-how and "Made in Italy", which is particularly useful for the brand image of companies to be competitive in a global market. [ABSTRACT FROM AUTHOR]

According to the United Nations (2020), since the 1980s, the global overall rate of water use has grown by 1% per year, and it is projected that, by 2050, humanity's water footprint could exceed 30% of current levels. This situation is in stark contrast to the path toward the Sustainable Development Goals, especially Goal 6, "clean water and sanitation", which also influences Goal 14, "life below water", and Goal 15, "life on land". This is because the availability of water directly affects the food security and production capacity of each Country, and therefore its management is a crucial issue worthy of particular attention. Problems related to water security are particularly evident in the Mediterranean area, which is already facing high environmental challenges. It is an area severely affected by global warming; thus, it is one of the most vulnerable environments to climate change globally. It follows that the improper management of water resources could further worsen an already alarming situation. This research aims to study the main water-related challenges that Mediterranean Countries face, highlighting the significant problems that weaken each Country. In this regard, the indicators relating to Goal 6 were considered, to define each Country's current state. However, for a correct understanding, the main problems these Countries face were researched through a critical review of the literature (Scopus, Google Scholar,Web of Science). In this way, we were able to underline the effects of human activities on the hydrosphere and the repercussions on various ecosystems, following the drivers-pressures-state-impact-response causal framework. The results suggest that there is still a long way for Mediterranean Countries to progress toward Agenda 2030, as they face problems related to chemical (nitrate, microplastics, heavy metals, pesticides, etc.) and biological (E. coli and other microorganisms) pollution, as well as saline aquifers, absent or obsolete infrastructures, and transboundary basins. Hence, this study aims to provide valuable tools for a better evaluation of water management in Mediterranean Countries. [ABSTRACT FROM AUTHOR]

Simple Summary: Myeloproliferative neoplasms (MPNs) are clonal hematological disorders, characterized by increased proliferation of the myeloid lineages in the bone marrow. Since their original recognition by William Damashek in 1951, MPNs have been extensively investigated at a clinical-pathological and molecular level. This prompted a progressive refinement of their classification and diagnostic criteria. Uncertainties nonetheless remain in a small (yet consistent) subset of cases, characterized by unconventional and/or overlapping clinical-pathological features. Such cases (referred to as MPN, unclassifiable [MPN-U]) encompass a broad spectrum of entities, including early phase MPNs, terminal (i.e., fibrotic) MPNs, MPNs associated with inflammatory or neoplastic disorders, and poorly characterized MPNs with clinical-pathological mismatch or atypical molecular features. In this review, we discuss the rationale behind the classification and diagnostic criteria of MPNs, focusing on the still open issues concerning MPN-U. Myeloproliferative neoplasms (MPNs) are a heterogeneous group of clonal hematopoietic stem cell disorders, characterized by increased proliferation of one or more myeloid lineages in the bone marrow. The classification and diagnostic criteria of MPNs have undergone relevant changes over the years, reflecting the increased awareness on these conditions and a better understanding of their biological and clinical-pathological features. The current World Health Organization (WHO) Classification acknowledges four main sub-groups of MPNs: (i) Chronic Myeloid Leukemia; (ii) classical Philadelphia-negative MPNs (Polycythemia Vera; Essential Thrombocythemia; Primary Myelofibrosis); (iii) non-classical Philadelphia-negative MPNs (Chronic Neutrophilic Leukemia; Chronic Eosinophilic Leukemia); and (iv) MPNs, unclassifiable (MPN-U). The latter are currently defined as MPNs with clinical-pathological findings not fulfilling the diagnostic criteria for any other entity. The MPN-U spectrum traditionally encompasses early phase MPNs, terminal (i.e., advanced fibrotic) MPNs, and cases associated with inflammatory or neoplastic disorders that obscure the clinical-histological picture. Several lines of evidence and clinical practice suggest the existence of additional myeloid neoplasms that may expand the spectrum of MPN-U. To gain insight into such disorders, this review addresses the history of MPN classification, the evolution of their diagnostic criteria and the complex clinical-pathological and biological features of MPN-U. [ABSTRACT FROM AUTHOR]

Interstitial cystitis (IC) or painful bladder syndrome is a chronic dysfunction due to an inflammatory condition, characterized by bladder pain and urinary frequency. Currently, no gold standard therapy is available since IC does not respond to conventional ones. Given these premises, the aim of this work was the in vitro characterization of biological properties (mucoadhesion and anti-inflammatory activity) of a commercial product (HydealCyst–HydC) based on hyaluronic acid (HA) and the benzyl ester of HA (Hydeal-D®) intended for bladder instillation to restore and/or protect the urothelial layer of glycosamino glycans (GAGs). The in vitro characterization demonstrated that an interaction product is formed between HA and Hydeal-D® that has a role in the rheological behavior and mucoadhesive properties. HA was identified as a key component to form the mucoadhesive joint, while the interaction of HA with Hydeal-D® improved polysaccharide stability and prolonged the activity ex vivo. Moreover, HydC is cytocompatible with urothelial cells (HTB-4) and possesses an anti-inflammatory effect towards these cells by decreasing the secretion of IL-6 and IL-8, which were both increased in patients with IC, and by increasing the secretion of sulfated GAGs. These two findings, along with the resilience properties of the formulation due to mucoadhesion, suggest the active role of HydC in protecting and restoring urothelium homeostasis. [ABSTRACT FROM AUTHOR]

The collection of the organic fraction in Italy recorded significant growth in the decade 2010–2019 (+74%) due to both the increase in the spread of separate waste collection as well as the increase in the biological treatment plants of municipal waste. However, within the organic fraction there remains a share of non-compostable material (NCM) (plastic, glass, aluminum, etc.), equal to ~5% of the total, which affects the efficiency of composting practices as well as decreasing both the yield and the quality of the final compost, causing a portion of organic material to be subtracted from composting and ending up in landfills. Therefore, the purpose of this work is to evaluate how the sustainability of the organic fraction collection and the amount of compost obtained in the composting plants could improve, following the use of biodegradable and compostable bioplastic bags (shoppers), in replacement for conventional plastic ones. The Life Cycle Assessment (LCA) and Carbon Footprint (CF) methodology was used for the assessment, comparing two different scenarios based on data relating to the collection of the organic fraction in Italy in 2019. Scenario 1 relates to the composting of organic material that also contains plastics, bioplastics, and non-compostable materials, while in scenario 2 the share of plastic material in the first scenario has been entirely replaced by bioplastics. The results show that scenario 2 assumes the lowest values for 15 impact categories out of the 18 analyzed, and, among these, in three categories it assumes negative values: ozone formation-terrestrial ecosystems (−1.64 × 10−2 kg NOX eq), ozone formation-human health (−8.50 × 10−3 kg NOX eq), and fossil resource scarcity (−4.91 × 102 kg oil eq). Furthermore, scenario 2 has a negative carbon footprint (−3.80 kg CO2 eq) compared to scenario 1 (79.71 kg CO2 eq), and in general it is the most sustainable scenario as a direct consequence of the greater amount of compost obtained (307.4 kg vs. 269.2 kg). [ABSTRACT FROM AUTHOR]

Periodontitis is a set of inflammatory conditions affecting the tissues surrounding the teeth predominantly sustained by bacterial infections. The aim of the work was the design and the development of scaffolds based on biopolymers to be inserted in the periodontal pocket to restore tissue integrity and to treat bacterial infections. Nanofibrous scaffolds were prepared by means of electrospinning. Gelatin was considered as base component and was associated to low and high molecular weight chitosans and alginate. The scaffolds were characterized by chemico–physical properties (morphology, solid state-FTIR and differential scanning calorimetry (DSC)-surface zeta potential and contact angle), and mechanical properties. Moreover, preclinical properties (cytocompatibility, fibroblast and osteoblast adhesion and proliferation and antimicrobial properties) were assessed. All the scaffolds were based on cylindrical and smooth nanofibers and preserved their nanofibrous structure upon hydration independently of their composition. They possessed a high degree of hydrophilicity and negative zeta potentials in a physiological environment, suitable surface properties to enhance cell adhesion and proliferation and to inhibit bacteria attachment. The scaffold based on gelatin and low molecular weight chitosan proved to be effective in vitro to support both fibroblasts and osteoblasts adhesion and proliferation and to impair the proliferation of Streptococcus mutans and Aggregatibacter actinomycetemcomitans, both pathogens involved in periodontitis. [ABSTRACT FROM AUTHOR]

According to the United Nations (UN), although cities occupy only 3% of Earth's surface, they host more than half of the global population, are responsible for 70% of energy consumption, and 75% of carbon emissions. All this is a consequence of the massive urbanization verified since the 1950s and which is expected to continue in the coming decades. A crucial issue will therefore concern the management of existing cities and the planning of future ones, and this was also emphasized by the UN Sustainable Development Goals (SDGs), especially in Goal 11 (Sustainable Cities and communities). Smart Cities are often seen as ideal urban environments in which the different dimensions of a city (economy, education, energy, environment, etc.) are managed successfully and proactively. So, one of the most important challenges cities will have to face, is to guide citizens towards a form of "clean" energy consumption, and the dimension on which decision-makers will be able to work is the decarbonization of transport. To achieve this, electric mobility could help reduce polluting emissions on the road. Within this research, the strategies that six Smart Cities (London, Hamburg, Oslo, Milan, Florence, and Bologna) have implemented to encourage the transition to this form of mobility have been studied. Through a systematic review of the literature (Scopus, Google Scholar, and Web of Science) and through the study of the main political/energy documents of the cities, their policies on electric mobility have been evaluated. Then, for each city, SDG 11.6.2 was analyzed to assess the air quality in the last four years (2016–2019) and, therefore, the effectiveness of the policies. The analysis showed, in general, that the policies have worked, inducing reductions in the pollutants of PM2.5, PM10, NO2. In particular, the cities showed the most significant reduction in pollutant (above 20%) were Hamburg (−28% PM2.5 and −2%6 NO2), Milan (−25% PM2.5 and −52% NO2), and London (−26% NO2). [ABSTRACT FROM AUTHOR]

The tendon is a highly aligned connective tissue that transmits force from muscle to bone. Each year, more than 32 million tendon injuries have been reported, in fact, tendinopathies represent at least 50% of all sports injuries, and their incidence rates have increased in recent decades due to the aging population. Current clinical grafts used in tendon treatment are subject to several restrictions and there is a significant demand for alternative engineered tissue. For this reason, innovative strategies need to be explored. Tendon replacement and regeneration are complex since scaffolds need to guarantee an adequate hierarchical structured morphology and mechanical properties to stand the load. Moreover, to guide cell proliferation and growth, scaffolds should provide a fibrous network that mimics the collagen arrangement of the extracellular matrix in the tendons. This review focuses on tendon repair and regeneration. Particular attention has been devoted to the innovative approaches in tissue engineering. Advanced manufacturing techniques, such as electrospinning, soft lithography, and three-dimensional (3D) printing, have been described. Furthermore, biological augmentation has been considered, as an emerging strategy with great therapeutic potential. [ABSTRACT FROM AUTHOR]

Chronic wounds, such as pressure ulcers, diabetic ulcers, venous ulcers and arterial insufficiency ulcers, are lesions that fail to proceed through the normal healing process within a period of 12 weeks. The treatment of skin chronic wounds still represents a great challenge. Wound medical devices (MDs) range from conventional and advanced dressings, up to skin grafts, but none of these are generally recognized as a gold standard. Based on recent developments, this paper reviews nanotechnology-based medical devices intended as skin substitutes. In particular, nanofibrous scaffolds are promising platforms for wound healing, especially due to their similarity to the extracellular matrix (ECM) and their capability to promote cell adhesion and proliferation, and to restore skin integrity, when grafted into the wound site. Nanotechnology-based scaffolds are emphasized here. The discussion will be focused on the definition of critical quality attributes (chemical and physical characterization, stability, particle size, surface properties, release of nanoparticles from MDs, sterility and apyrogenicity), the preclinical evaluation (biocompatibility testing, alternative in vitro tests for irritation and sensitization, wound healing test and animal wound models), the clinical evaluation and the CE (European Conformity) marking of nanotechnology-based MDs. [ABSTRACT FROM AUTHOR]

Background: hydrogels prepared with natural inorganic excipients and spring waters are commonly used in medical hydrology. Design of these clay-based formulations continues to be a field scarcely addressed. Safety and wound healing properties of different fibrous nanoclay/spring water hydrogels were addressed. Methods: in vitro biocompatibility, by means of MTT assay, and wound healing properties were studied. Confocal Laser Scanning Microscopy was used to study the morphology of fibroblasts during the wound healing process. Results: all the ingredients demonstrated to be biocompatible towards fibroblasts. Particularly, the formulation of nanoclays as hydrogels improved biocompatibility with respect to powder samples at the same concentration. Spring waters and hydrogels were even able to promote in vitro fibroblasts motility and, therefore, accelerate wound healing with respect to the control. Conclusion: fibrous nanoclay/spring water hydrogels proved to be skin-biocompatible and to possess a high potential as wound healing formulations. Moreover, these results open new prospects for these ingredients to be used in new therapeutic or cosmetic formulations. [ABSTRACT FROM AUTHOR]

Infections in nonhealing wounds remain one of the major challenges. Recently, nanomedicine approach seems a valid option to overcome the antibiotic resistance mechanisms. The aim of this study was the development of three types of polysaccharide-based scaffolds (chitosan-based (CH), chitosan/chondroitin sulfate-based (CH/CS), chitosan/hyaluronic acid-based (CH/HA)), as dermal substitutes, to be loaded with norfloxacin, intended for the treatment of infected wounds. The scaffolds have been loaded with norfloxacin as a free drug (N scaffolds) or in montmorillonite nanocomposite (H—hybrid-scaffolds). Chitosan/glycosaminoglycan (chondroitin sulfate or hyaluronic acid) scaffolds were prepared by means of electrospinning with a simple, one-step process. The scaffolds were characterized by 500 nm diameter fibers with homogeneous structures when norfloxacin was loaded as a free drug. On the contrary, the presence of nanocomposite caused a certain degree of surface roughness, with fibers having 1000 nm diameters. The presence of norfloxacin–montmorillonite nanocomposite (1%) caused higher deformability (90–120%) and lower elasticity (5–10 mN/cm2), decreasing the mechanical resistance of the systems. All the scaffolds were proven to be degraded via lysozyme (this should ensure scaffold resorption) and this sustained the drug release (from 50% to 100% in 3 days, depending on system composition), especially when the drug was loaded in the scaffolds as a nanocomposite. Moreover, the scaffolds were able to decrease the bioburden at least 100-fold, proving that drug loading in the scaffolds did not impair the antimicrobial activity of norfloxacin. Chondroitin sulfate and montmorillonite in the scaffolds are proven to possess a synergic performance, enhancing the fibroblast proliferation without impairing norfloxacin's antimicrobial properties. The scaffold based on chondroitin sulfate, containing 1% norfloxacin in the nanocomposite, demonstrated adequate stiffness to sustain fibroblast proliferation and the capability to sustain antimicrobial properties to prevent/treat nonhealing wound infection during the healing process. [ABSTRACT FROM AUTHOR]

The increase in life expectancy and the increasing prevalence of diabetic disease and venous insufficiency lead to the increase of chronic wounds. The prevalence of ulcers ranges from 1% in the adult population to 3–5% in the over 65 years population, with 3–5.5% of the total healthcare expenditure, as recently estimated. The aim of this work was the design and the development of electrospun scaffolds, entirely based on biopolymers, loaded with montmorillonite (MMT) or halloysite (HNT) and intended for skin reparation and regeneration, as a 3D substrate mimicking the dermal ECM. The scaffolds were manufactured by means of electrospinning and were characterized for their chemico-physical and preclinical properties. The scaffolds proved to possess the capability to enhance fibroblast cells attachment and proliferation with negligible proinflammatory activity. The capability to facilitate the cell adhesion is probably due to their unique 3D structure which are assisting cell homing and would facilitate wound healing in vivo. [ABSTRACT FROM AUTHOR]

Cutaneous wounds represent a major issue in medical care, with approximately 300 million chronic and 100 million traumatic wound patients worldwide, and microbial infections slow the healing process. The aim of this work was to develop electrospun scaffolds loaded with silver nanoparticles (AgNPs) to enhance cutaneous healing, preventing wound infections. AgNPs were directly added to polymeric blends based on chitosan (CH) and pullulan (PUL) with hyaluronic acid (HA) or chondroitin sulfate (CS) to be electrospun obtaining nanofibrous scaffolds. Moreover, a scaffold based on CH and PUL and loaded with AgNPs was prepared as a comparison. The scaffolds were characterized by chemico–physical properties, enzymatic degradation, biocompatibility, and antimicrobial properties. All the scaffolds were based on nanofibers (diameters about 500 nm) and the presence of AgNPs was evidenced by TEM and did not modify their morphology. The scaffold degradation was proven by means of lysozyme. Moreover, the AgNPs loaded scaffolds were characterized by a good propensity to promote fibroblast proliferation, avoiding the toxic effect of silver. Furthermore, scaffolds preserved AgNP antimicrobial properties, although silver was entrapped into nanofibers. Chitosan/chondroitin sulfate scaffold loaded with AgNPs demonstrated promotion of fibroblast proliferation and to possess antimicrobial properties, thus representing an interesting tool for the treatment of chronic wounds. [ABSTRACT FROM AUTHOR]

The spontaneous healing of a tendon laceration results in the formation of scar tissue, which has lower functionality than the original tissue. Moreover, chronic non-healing tendon injuries frequently require surgical treatment. Several types of scaffolds have been developed using the tissue engineering approach, to complement surgical procedures and to enhance the healing process at the injured site. In this work, an electrospun hybrid tubular scaffold was designed to mimic tissue fibrous arrangement and extracellular matrix (ECM) composition, and to be extemporaneously loaded into the inner cavity with human platelet lysate (PL), with the aim of leading to complete post-surgery functional regeneration of the tissue for functional regeneration of the osteo-tendon interface. For this purpose, pullulan (P)/chitosan (CH) based polymer solutions were enriched with hydroxyapatite nanoparticles (HP) and electrospun. The nanofibers were collected vertically along the length of the scaffold to mimic the fascicle direction of the tendon tissue. The scaffold obtained showed tendon-like mechanical performance, depending on HP content and tube size. The PL proteins were able to cross the scaffold wall, and in vitro studies have demonstrated that tenocytes and osteoblasts are able to adhere to and proliferate onto the scaffold in the presence of PL; moreover, they were also able to produce either collagen or sialoproteins, respectively-important components of ECM. These results suggest that HP and PL have a synergic effect, endorsing PL-loaded HP-doped aligned tubular scaffolds as an effective strategy to support new tissue formation in tendon-to-bone interface regeneration.