Search

Analyzing data from the Energy Poverty Observatory in Europe, it emerges that more than 50 million households in the EU live in energy poverty (people that cannot heat their homes during winter; cannot make their homes comfortable during the summer; pay their energy bills late). Research studies realized in the last 20 years highlight that making energy demand efficient and effective is the more significant and socially important the more it is able to involve users who are unable to sustain energy demand. The evolution of the research sees a narrowing of the field of investigation by focusing on the user dimension of energy poverty, stressing the role of citizens not only as consumer but also as producers of solutions to tackle energy poverty, real energy communities of agents. The paper aims to provide a systematic literature review highlighting the major findings of the topic, investigating the relationship between spatial and social issues, and looking at the state of energy poverty by addressing the profiling of users and consequently of services useful to overcome their current vulnerable condition. The paper is structured in two core sections. The first one gives the results of a systematic literature review on the energy/fuel poverty topic, the second one deepens the role of communities and individuals need, crucial in defining new design approaches for supportive solutions to tackle energy poverty. [ABSTRACT FROM AUTHOR]

Remote sensing is commonly performed via airborne platforms such as satellites, specialized aircraft, and unmanned aerial systems (UASs), which perform airborne photography using mounted cameras. However, they are limited by their coverage (UASs), irregular flyover frequency (aircraft), and/or low spatial resolution (satellites) due to their high altitude. In this paper, we examine the utilization of commercial flights as an airborne platform for remote sensing. Namely, we simulate a situation where all aircraft on commercial flights are equipped with a mounted camera used for airborne photography. The simulation is used to estimate coverage, the temporal and spatial resolution of aerial imagery acquired this way, as well as the storage capacity required for storing all imagery data. The results show that Europe is 83.28 percent covered with an average of one aerial photography every half an hour and a ground sampling distance of 0.96 meters per pixel. Capturing such imagery results in 20 million images or four petabytes of image data per day. More detailed results are given in the paper for separate countries/territories in Europe, individual commercial airlines and alliances, as well as three different cameras. [ABSTRACT FROM AUTHOR]

Increasing demand for modern treatments and significant profit margins are strong incentives for investors and producers. However, the production and use of medical devices is subject to a number of laws, regulations, strict standards, and certification processes. Therefore, the aim of this paper is to analyze patent activity based on the example of the selected country (Czech Republic), compare it with selected foreign countries, and discuss the development of this industry in the context of new medical device regulation (MDR) implementation. The paper is based on the theoretical concept of the relationship between regulation and innovation. The main challenge in the implementation of the new medical device regulations lies in the area of innovation. This is because most innovative research in the medical device sector is undertaken by small to medium enterprises (SMEs) rather than by large companies. SMEs are more vulnerable than big companies when it comes to development because the accompanying administrative costs can be so high that it may force the company to leave the market. Given that the main reason for the existence of economic regulations are various forms of market failure, which occurs when market mechanisms do not lead to results that benefit society, any attempts to redress this situation should naturally lead to greater benefits for society and hence benefits for the given industry as well. [ABSTRACT FROM AUTHOR]

Horizontal bar racks have been used as trash racks at hydropower plants since the 1920s. With the installation of the first horizontal bar rack bypass system at a hydropower plant as a downstream fish passage facility in 2006, these racks rapidly gained importance as fish protection measures. Since then, they have been installed at more than 100 small- to medium-sized hydropower plants in Europe. Despite the large number of installed racks, systematic investigations of the head losses and velocity fields were missing. On the basis of detailed hydraulic experimentation with a large number of rack parameters and including up-to-date foil-shaped bars, the layout of horizontal bar racks and their hydraulic performance were assessed in the current study. This paper reports the results of the rack head loss investigation, whereas the accompanying paper entitled Velocity Fields at Horizontal Bar Racks as Fish Guidance Structures focuses on the up- and downstream velocity fields. By applying foil-shaped bars instead of rectangular bars, the loss coefficient was reduced by more than 40%, depending on the rack configuration. Bottom and top overlays are used to increase the guidance efficiency for fish, sediments, and floating debris. However, the altered flow field results in increased head losses. A new set of equations is proposed to predict head losses for current horizontal bar racks, including overlays for various hydropower plant layouts. The predictions are compared to literature data. [ABSTRACT FROM AUTHOR]

Orthogonal frequency division multiplexing (OFDM) has become an indispensable part of waveform generation in wideband digital communication since its first appearance in digital audio broadcasting (DAB) in Europe in 1980s, and it is indeed in use. As has been seen, the OFDM based waveforms work well with time division duplex operation in new radio (NR) systems in 5G systems, supporting delay-sensitive applications, high spectral efficiency, massive multiple input multiple output (MIMO) compatibility, and ever-larger bandwidth signals, which has demonstrated successful commercial implementation for 5G downlinks and uplinks up to 256-QAM modulation schemes. However, the OFDM waveforms suffer from high peak to average power ratio (PAPR), which is not desired by system designers as they want RF power amplifiers (PAs) to operate with high efficiency. Although NR offers some options for maintaining the efficiency and spectral demand, such as cyclic prefix based (CP-OFDM), and discrete Fourier transform spread based (DFT-S-OFDM) schemes, which have limiting effects on PAPR, the PAPR is still as high as 13 dB. This value increases when the bandwidth is increased. Moreover, in LTE-Advance and 5G systems, in order to increase the bandwidth, and data-rate, carrier aggregation technology is used which increases the PAPR the same way that bandwidth increment does; therefore, it is essential to employ PAPR reduction in signal processing stage before passing the signal to PA. In this paper, we investigate the performance of an innovative peak shrinking and interpolation (PSI) technique for reducing peak to average power ratio (PAPR) in orthogonal frequency division multiplexing (OFDM) based signals at waveform generation stage. The main idea behind the PSI technique is to extract high peaks, scale them down, and interpolate them back into the signal. It is shown that PSI technique is a possible candidate for reducing PAPR without compromising on computational complexity, compatible for existing and future telecommunication systems such as 4G, 5G, and beyond. In this paper, the PSI technique is tested with variety of signals in terms of inverse fast Fourier transform (IFFT) length, type of the signal modulation, and applications. Additional work has been carried out to compare the proposed technique with other promising PAPR reduction techniques. This paper further validates the PSI technique through experimental measurement with a power amplifier (PA) test bench and achieves an adjacent channel power ratio (ACPR) of less than –55 dBc. Results showed improvement in output power of PA versus given input power, and furthermore, the error vector magnitude (EVM) of less than 1 % was achieved when comparing of the signal after and before modification by the PSI technique. [ABSTRACT FROM AUTHOR]

Horizontal bar racks used as fish protection measures at hydropower plants have rapidly gained importance in recent years. Despite the large number of installed racks in Europe, systematic investigations of the hydraulic losses and velocity fields were missing. To fill these research gaps, the hydraulic performance of horizontal bar racks was systematically investigated in a laboratory flume for a large number of rack parameters and different hydropower plant layouts. The results of the head loss assessment are published in a paper entitled Head Losses of Horizontal Bar Racks as Fish Guidance Structures, whereas the present paper focuses on the velocity fields. The measurements show that the bar shape, the horizontal approach flow angle, and the clear bar spacing have only a minor effect on the velocity fields. In contrast, bottom and top overlays might enhance the fish guidance efficiency for bottom and surface oriented fish, while the asymmetric downstream velocity field can reduce turbine efficiencies. The hydropower plant layout strongly affects the approach flow field to horizontal bar racks. For block-type hydropower plants, the installation of a dividing pier or partial opening of the spillways improves the flow field for better fish guidance. [ABSTRACT FROM AUTHOR]

Renewable energy sources are vital to achieving Europe's 2030 energy transition goals. Technological innovation, driven by public expenditures on research and development, is a major driver for this change. Thus, an extensive dataset on these expenditures of the European Member States and the European Commission, dating back to the early 1970s, was created. This paper creates predictive scenarios of public investment in renewable energy research and development in Europe based on this historical dataset and current trends. Funding from both, European Member States and the European Commission, between today and 2030 are used in the analysis. The impact on the cumulative knowledge stock is also estimated. Two projection scenarios are presented: (1) business as usual; and (2) an advanced scenario, based on the assumption that the Mission Innovation initiative causes public expenditures to increase in the coming years. Both scenarios are compared to the European 2030 climate and energy framework target sets. Results indicate that Member States in Europe currently tend to fund renewables more than the European Commission, but funding from both sources is expected to increase in the future. Furthermore, the European Commission distributes its funding more equally across the various renewable energy sources than Member States. [ABSTRACT FROM AUTHOR]

Railway networks are among the many physical systems that reveal a fractal structure. This paper studies the Portuguese railway system, and analyzes how it evolved over time, namely what concerns the structure of its different levels, and its distribution over the territory. Different mathematical tools are adopted, such as fractal dimension, entropy and state space portrait. The results are consistent with the historical evolution of the network. [ABSTRACT FROM AUTHOR]

Households' energy consumption has received a lot of attention in debates on urban sustainability and housing policy due to its possible consequences for climate change. In Europe, the residential sector accounts for roughly one third of the energy consumption and is responsible for 16% of total CO2 emissions. Households have been progressively highlighted as the main actor that can play a substantial in the reduction of this energy use. Their behavior is a complex and hard to change process that combines numerous determinants. These determinants have already been extensively studied in the literature from a variety of thematic domains (psychology, sociology, economics, and engineering), however, each approach is limited by its own assumptions and often omit important energy behavioral components. Therefore, energy behavior studies require an integration of disciplines through interdisciplinary approaches. Based on that knowledge, this paper introduces a conceptual framework to capture and understand households' energy consumption. The paper aims at connecting objective (physical and technical) with subjective (human) aspects related to energy use of households. This combination provide the answers to the 'what', the 'how' and most importantly the 'why' questions about people's behavior regarding energy use. It allows clarifying the numerous internal and external factors that act as key determinants, as well as the need to take into account their interactions. By doing so, we conclude the paper by discussing the value of the conceptual framework along with valuable insights for researchers, practitioners and policymakers. [ABSTRACT FROM AUTHOR]

The objective of this paper is to manifest the intellectual and cognitive structure of CORINE Land Cover (CLC) research applications. Data from the Web of Science (WoS) was used to delimit publication on CLC during the period from 1985 until 2019 (29th April), retrieving a total of 873 documents. Through author citations, the origins and the most influential papers were identified. The main lines of research were identified from word co-occurrences extracted from the titles, keywords, and abstracts of the papers. In the view of both structures, it can be concluded that CORINE land cover constitutes a relatively young set of scientific data, with a constant expansion and a strongly interdisciplinary structure. The development of this application is dependent on the knowledge of such research areas as geography, remote sensing, ecology, forestry, agriculture, engineering, optics, and/or computer science. We believe that this information could be very useful for CLC users, as it reflects a large-scale analysis of the research lines of CLC and illuminates how research has changed over time in diverse areas of applications. Moreover, this study is intended to offer a useful tool for the CLC scientific community, showcasing the main research lines and the most noteworthy papers. Finally, the methodology used in this study can be replicated in many other fields of science to explore its intellectual and cognitive structure. [ABSTRACT FROM AUTHOR]

The EU decarbonization strategy foresees deep cuts in CO2 in the transport sector. Investment in infrastructure, manufacturing of new technology vehicles and production of alternative fuels induce macroeconomic changes in activity and employment for both national and regional economies. The objective of the paper is to present a newly built macroeconomic-regional model (GEM-E3-R general equilibrium model for economy, energy and environment for regions) for assessing impacts of transport sector restructuring on regional economies of the entire EU, segmented following NUTS-3 (nomenclature of territorial units of statistics). The model combines general economic equilibrium theory with location choice and New Economic Geography and implements a dynamic, fully endogenous agglomeration-dispersion mechanism for people and industries coupled with a gravity model for bilateral interregional flows. A novelty of the model is a two-layers structure: (i) the country-wide layer formulated as a global multi-sector, multi-country and multi-period computable general equilibrium (CGE) model; and (ii) the regional economy layer, which simulates impacts on regional economies, while considering country-wide economic trends as boundary conditions. The paper presents a use of the model in the assessment of regional economic effects of electrification of car mobility in Europe and wide use of domestically produced advanced biofuels. [ABSTRACT FROM AUTHOR]

The paper presents a newly developed economic-engineering model of the buildings sector and its implementation for all the European Union (EU) Member States (MS), designed to study in detail ambitious energy efficiency strategies and policies, in the context of deep decarbonisation in the long term. The model has been used to support the impact assessment study that accompanied the European Commission's communication "A Clear Planet for All", in November 2018. The model covers all EU countries with a fine resolution of building types, and represents agent decision-making in a complex and dynamic economic-engineering mathematical framework. Emphasis is given to behaviours driving the energy renovation of buildings and the ensuing choice of equipment for heating and cooling. The model represents several market and non-market policies that can influence energy decisions in buildings and promote deep energy renovation. Moreover, the paper presents key applications for supporting policies targeting ambitious reduction of energy consumption and carbon emissions in buildings across Europe. The results illustrate that the achievement of ambitious energy-efficiency targets in the long-term heavily depends on pursuing a fast and extensive renovation of existing buildings, at annual rates between 1.21% and 1.77% for the residential sector and between 0.92% to 1.35% for the services sector. In both cases, the renovation rates are far higher past trends. Strong policies aimed at removing non-market barriers are deemed necessary. Electrification constitutes a reasonable choice for deeply renovated buildings and, as a result, almost 50% of households chooses electric heating over gas heating in the long term. However, heat pumps need to exploit further their learning potential to be economical and implementable for the various climatic conditions in Europe. The results also show that the cost impacts are modest even if renovation and decarbonisation in buildings develop ambitiously in the EU. The reduced energy bills due to energy savings can almost offset the increasing capital expenditures. Fundraising difficulties and the cost of capital are, however, of concern. [ABSTRACT FROM AUTHOR]

Global electricity demand is constantly growing, making the utilization of solar and wind energy sources, which also reduces negative environmental effects, more and more important. These variable energy sources have an increasing role in the global energy mix, including generating capacity. Therefore, the need for energy storage in electricity networks is becoming increasingly important. This paper presents the challenges of European variable renewable energy integration in terms of the power capacity and energy capacity of stationary storage technologies. In this research, the sustainable transition, distributed generation, and global climate action scenarios of the European Network of Transmission System Operators for 2040 were examined. The article introduces and explains the feasibility of the European variable renewable energy electricity generation targets and the theoretical maximum related to the 2040 scenarios. It also explains the determination of the storage fractions and power capacity in a new context. The aim is to clarify whether it is possible to achieve the European variable renewable energy integration targets considering the technology-specific storage aspects. According to the results, energy storage market developments and regulations which motivate the increased use of stationary energy storage systems are of great importance for a successful European solar and wind energy integration. The paper also proves that not only the energy capacity but also the power capacity of storage systems is a key factor for the effective integration of variable renewable energy sources. [ABSTRACT FROM AUTHOR]

Electric vehicles (EVs) can play an important role in improving the European Union's (EU)'s energy supply security, reducing the environmental impact of transport, and increasing EU competitiveness. The EU aims at fostering the synchronised deployment of EVs and necessary recharging infrastructure. There is currently a lack of studies in the literature for analysing the societal impacts of EV and infrastructure deployment at continental scale. In our paper, we analyse the likely impact of related plans of the EU member states (MSs). With the help of qualitative and quantitative analyses, we study the impact of plans on recharging infrastructure deployment, contributions to the EU climate and energy goals, air quality objectives, and reinforcement of the EU's competitiveness and job creation. We soft-link a fleet impact model with a simplified source receptor relationship model, and propose a new model to calculate job impacts. The results overall show modest impacts by 2020, as most member states' plans are not very ambitious. According to our analysis of the plans, a reduction of CO2 emissions by 0.4%, NOx emissions by 0.37%, and PM2.5 emissions by 0.44%, as well as a gross job creation of more than 8000 jobs will be achieved by 2020. The member state plans are very divergent. For countries with more ambitious targets up to 2020, such as Austria, France, Germany, and Luxemburg, the climate, energy, and air quality impacts are significant and show what would be achievable if the EU would increase its pace of EV and infrastructure deployment. We conclude that more ambitious efforts by the member states' to deploy electric vehicles could accelerate the reduction of CO2 emissions and lead to less dependence on fossil oil-based fuels, along with air quality improvements, while at the same time creating new job opportunities in Europe. In regards to the ratio of publicly accessible recharging points (RPs) per EV, we conclude that member states have to come up with more ambitious targets for recharging point deployment, as the current plans will lead to only one recharging point per every 20 EVs by 2020 across the EU. This paper can serve as useful input to the further the planning of EV and recharging infrastructure deployment in the EU and elsewhere. Our study highlights that the different strategies that are followed in the EU member states can be a fertile ground to identify best practices. It remains a challenge to quantify how different support policies impact EV deployment. In terms of further research needs, we identify that more detailed studies are required to determine an appropriate level of infrastructure deployment, including fast chargers. [ABSTRACT FROM AUTHOR]

Natural water reservoirs are very valuable floristic sites, with springs particularly important for the preservation of floral biodiversity. This paper presents, as a case study, a community of water plants that is new to limnocrene karst springs in Europe: Potametum alpini (Potametea), found in Poland. The paper provides the floristic composition and ecological requirements of this plant association, which is rare and endangered in Europe. According to our knowledge, the habitat data presented here are unique as they are published for the first time for this plant community, and thus it is currently not possible to compare them with data from other authors. Our study confirms the importance of rare microhabitats for global biodiversity. Research on as yet unknown physical and chemical factors limiting the range and development of patches of different plant associations should be conducted intensively, because plant communities, including rare, endangered and protected examples, are an important element of biodiversity at both continental and local scales. All the issues discussed in the paper (rare microhabitats, endangered aquatic plant communities, global biodiversity) are important because they are related to the conservation and management of inland waters. [ABSTRACT FROM AUTHOR]

Low competitiveness is a common denominator of historically Roman Catholic countries. In contrast, historically Protestant countries generally perform better in education, social progress, and competitiveness. Jesus Christ described the true and false prophets coming on his behalf, as follows: "Ye shall know them by their fruits". Inspired by this parable, this paper explores the relations between religious systems ('prophets') and social prosperity ('fruits'). It asks how Protestantism influences prosperity as compared to Roman Catholicism in Europe and the Americas. Most empirical studies have hitherto disregarded the institutional influence of religion. Taking the work of Max Weber as their starting point, they have instead emphasised the cultural linkage between religious adherents and prosperity. This paper tests various correlational models and draws on a comprehensive conceptual framework to understand the institutional influence of religion on prosperity in Europe and the Americas. It argues that the uneven contributions of Roman Catholicism and Protestantism to prosperity are grounded in their different historical and institutional foundations and in the theologies that are pervasive in their countries of influence. [ABSTRACT FROM AUTHOR]

In this paper, a proposed computational method referred to as Projected Differential Transformation Method (PDTM) resulting from the modification of the classical Differential Transformation Method (DTM) is applied, for the first time, to the Black-Scholes Equation for European Option Valuation. The results obtained converge faster to their associated exact solution form; these easily computed results represent the analytical values of the associated European call options, and the same algorithm can be followed for European put options. It is shown that PDTM is more efficient, reliable and better than the classical DTM and other semi-analytical methods since less computational work is involved. Hence, it is strongly recommended for both linear and nonlinear stochastic differential equations (SDEs) encountered in financial mathematics. [ABSTRACT FROM AUTHOR]

Storms are one of the most damaging agents for European forests and can cause huge and long-term economic impacts on the forest sector. Recent events and research haves contributed to a better understanding and management of destructive storms, but public authorities still lack appropriate decision-support tools for evaluating their strategic decisions in the aftermath of a storm. This paper presents a decision support system (DSS) that compares changes in the dynamics of the regional forest-based sector after storm events under various crisis management options. First, the development and implementation of a regional forest model is addressed; then, the potential application of the model-based DSS WIND-STORM is illustrated. The results of simulated scenarios reveal that this DSS type is useful for designing a cost-effective regional strategy for storm-damage management in the context of scarce public resources and that public strategies must encompass the whole forest-based sector to be efficient. Additional benefits of such a DSS is to bring together decision-makers and forest stakeholders for a common objective and therefore to enhance participatory approaches to crisis management. [ABSTRACT FROM AUTHOR]

Impervious surfaces (IS) are a key indicator of environmental quality, and mapping of urban IS is important for a wide range of applications including hydrological modelling, water management, urban and environmental planning and urban climate studies. This paper addresses the accuracy and applicability of vegetation indices (VI), from Landsat imagery, to estimate IS fractions for European cities. The accuracy of three different measures of vegetation cover is examined for eight urban areas at different locations in Europe. The Normalized Difference Vegetation Index (NDVI) and Soil Adjusted Vegetation Index (SAVI) are converted to IS fractions using a regression modelling approach. Also, NDVI is used to estimate fractional vegetation cover (FR), and consequently IS fractions. All three indices provide fairly accurate estimates (MAEs ≈ 10%, MBE's < 2%) of sub-pixel imperviousness, and are found to be applicable for cities with dissimilar climatic and vegetative conditions. The VI/IS relationship across cities is examined by quantifying the MAEs and MBEs between all combinations of models and urban areas. Also, regional regression models are developed by compiling data from multiple cities to examine the potential for developing and applying a single regression model to estimate IS fractions for numerous urban areas without reducing the accuracy considerably. Our findings indicate that the models can be applied broadly for multiple urban areas, and that the accuracy is reduced only marginally by applying the regional models. SAVI is identified as a superior index for the development of regional quantification models. The findings of this study highlight that IS fractions, and spatiotemporal changes herein, can be mapped by use of simple regression models based on VIs from remote sensors, and that the method presented enables simple, accurate and resource efficient quantification of IS. [ABSTRACT FROM AUTHOR]

As European forest policy increasingly focuses on multiple ecosystem services and participatory decision making, forest managers and policy planners have a need for integrated, user-friendly, broad spectrum decision support systems (DSS) that address risks and uncertainties, such as climate change, in a robust way and that provide credible advice in a transparent manner, enabling effective stakeholder involvement. The Sim4Tree DSS has been accordingly developed as a user-oriented, modular and multipurpose toolbox. Sim4Tree supports strategic and tactical forestry planning by providing simulations of forest development, ecosystem services potential and economic performance through time, from a regional to a stand scale, under various management and climate regimes. Sim4Tree allows comparing the performance of different scenarios with regard to diverse criteria so as to optimize management choices. This paper explains the concept, characteristics, functionalities, components and use of the current Sim4Tree DSS v2.5, which was parameterized for the region of Flanders, Belgium, but can be flexibly adapted to allow a broader use. When considering the current challenges for forestry DSS, an effort has been made towards the participatory component and towards integration, while the lack of robustness remains Sim4Tree's weakest point. However, its structural flexibility allows many possibilities for future improvement and extension. [ABSTRACT FROM AUTHOR]

The Humanities have a problem with visibility both in the public sphere and in the academic system itself, and they have an organisational problem when compared with other sections of the academic system. They also have a funding problem, particularly in a European context, i.e., in the framework of the European research policy. The topic of this position paper is the essential role of the Humanities when dealing with the European project, the framing of Europe. In this respect, in contrast to the natural and social sciences, the Humanities need specific models of research funding, more individualised and of more interdisciplinary character. Additionally, they may need more multi-national centres for advanced studies on a European level, thus also solving their visibility and organisational problems. [ABSTRACT FROM AUTHOR]

The state-of-the-art of atmospheric contaminant transport modeling provides accurate estimation of chemical concentrations. However, existing complex models, sophisticated in terms of process description and potentially highly accurate, may entail expensive setups and require very detailed input data. In contexts where detailed predictions are not needed (e.g., for regulatory risk assessment or life cycle impact assessment of chemicals), simple models allowing quick evaluation of contaminants may be preferable. The goal of this paper is to illustrate and critically discuss the use of a simple equation proposed by Pistocchi and Galmarini (2010), which can be implemented through basic GIS functions, to predict atmospheric concentrations of lindane (γ-HCH) in Europe from both local and remote sources. Concentrations were computed for 1995 and 2005 assuming different modes of use of lindane and consequently different spatial patterns of emissions. Results were compared with those from the well-established MSCE-POP model (2005) developed within EMEP (European Monitoring and Evaluation Programme), and with available monitoring data, showing acceptable correspondence in terms of the orders of magnitude and spatial distribution of concentrations, especially when the background effect of emissions from extracontinental sources, estimated using the same equation, is added to European emissions. [ABSTRACT FROM AUTHOR]

The percentage of elderly people in European countries is increasing. Such conjuncture affects socio-economic structures and creates demands for resourceful solutions, such as Ambient Assisted Living (AAL), which is a possible methodology to foster health care for elderly people. In this context, sensor-based devices play a leading role in surveying, e.g., health conditions of elderly people, to alert care personnel in case of an incident. However, the adoption of such devices strongly depends on the comfort of wearing the devices. In most cases, the bottleneck is the battery lifetime, which impacts the effectiveness of the system. In this paper we propose an approach to reduce the energy consumption of sensors' by use of local sensors' intelligence. By increasing the intelligence of the sensor node, a substantial decrease in the necessary communication payload can be achieved. The results show a significant potential to preserve energy and decrease the actual size of the sensor device units. [ABSTRACT FROM AUTHOR]

This paper presents the methodology and results of impact assessment of renewable energy policies on atmospheric emissions of mercury in Europe. The modeling exercise described here involves an interaction of several models. First, a set of energy scenarios has been developed with the REMix (Renewable Energy Mix) model that simulates different levels of penetration of renewable energies in the European power sector. The energy scenarios were input to the GAINS (Greenhouse Gas and Air Pollution Interactions and Synergies) model, which prepared projections of mercury releases to the atmosphere through 2050, based on the current air pollution control policies in each country. Data on mercury emissions from individual sectors were subsequently disaggregated to a fine spatial resolution using various proxy parameters. Finally, the dispersion of mercury in the atmosphere was computed by the chemistry transport model, implemented to the air quality system, Polyphemus. The simulations provided information on changes in concentrations and depositions of various forms of mercury over Europe. Scenarios that simulate a substantial expansion of renewable energies within the power sector indicate extensive co-benefits for mercury abatement, due to the restructuring of the energy system and changes in the fuel mix. The potential for mercury reductions in Europe depends on the rate of fuel switches and renewable technology deployment, but is also influenced by the stringency and timing of the air quality measures. The overall scope for co-benefits is therefore higher in regions relying on coal combustion as a major energy source. [ABSTRACT FROM AUTHOR]

With the increasing demand for renewable energy and sustainable waste treatment, biogas production is expanding. Approximately four billion litres of bio-ethanol are produced annually for vehicle fuel in Europe, resulting in the production of large amounts of stillage residues. This stillage is energy-rich and can be used for biogas production, but is a challenging substrate due to its high levels of nitrogen and sulphate. At the full-scale biogas production plant in Norrköping, Sweden (Svensk Biogas i Linköping AB), thin grain stillage is used as a biogas substrate. This paper describes the plant operation and strategies that have been implemented to digest thin stillage successfully. High ammonia concentrations in the digester have resulted in syntrophic acetate oxidation (SAO) becoming the major pathway for acetate degradation. Therefore, a long hydraulic retention time (HRT) (40-60 days) is used to allow the syntrophic acetate-oxidising bacteria time to grow. The high sulphate levels in thin stillage result in high levels of hydrogen sulphide following degradation of protein and the activity of sulphate-reducing bacteria (SRB), the presence of which has been confirmed by quantitative polymerase chain reaction (qPCR) analysis. To optimise biogas production and maintain a stable process, the substrate is diluted with tap water and co-digested with grain residues and glycerine to keep the ammonium nitrogen (NH4-N) concentration below 6 g L-1. Combined addition of iron, hydrochloric acid and cobalt successfully precipitates sulphides, reduces ammonia toxicity and supplies microorganisms with trace element. Mesophilic temperature (38 °C) is employed to further avoid ammonia toxicity. Together, these measures and doubling the digester volume have made it possible to increase annual biogas production from 27.7 TJ to 69.1 TJ. [ABSTRACT FROM AUTHOR]

This article takes a future focus on the direction in which social forces develop the market for animal-friendly products in Europe. On the basis of qualitative data gathered in the context of the European EconWelfare project, the differences across eight European countries are studied. The findings suggest that, given international trade barriers that prevent an improvement of animal welfare through legislation, many stakeholders believe that the market is the most viable direction to improve farm animal welfare. Economic productivity of the chain remains, however, an issue that on a fundamental level conflicts with the objective to improve animal welfare. With the help of a deeper conceptual understanding of willingness to pay for animal welfare, the paper finds that the European market for animal-friendly products is still largely fragmented and that the differences between European countries are considerable. A more animal-friendly future that is achieved through the market will therefore need substantial policy attention from stakeholders in society. [ABSTRACT FROM AUTHOR]

This paper describes the combination of terrestrial vegetation observations from two sensors, providing a historical dataset used for an in-depth analysis of the corresponding spatio-temporal patterns. The Fraction of Absorbed Photosynthetically Active Radiation (FAPAR) is an important variable suitable for regional to large-scale monitoring of climate impacts on vegetation. In this work, we create an extensive dataset of FAPAR using a 10-day product at ∼1 km resolution from September, 1997, to April, 2012, combining information from two sensors: the NASA/Sea-viewing Wide Field-of-view Sensor (SeaWiFS) and the European Space Agency (ESA)/Medium Resolution Imaging Spectrometer Instrument (MERIS). The proposed methodology reduces the noise, fills the gaps and corrects for the spurious trends in the data, providing a time-consistent coverage of FAPAR. We develop a fast merging method and evaluate its performance over Europe and the Horn of Africa. [ABSTRACT FROM AUTHOR]

In this paper we demonstrate the potential of combining electric hybridization with a dual-fuel natural gas-Diesel engine. We show that carbon dioxide emissions can be reduced to 43 gram per kilometer with a subcompact car on the New European Driving Cycle (NEDC). The vehicle is operated in charge-sustaining mode, which means that all energy is provided by the fuel. The result is obtained by hardware-in-the-loop experiments where the engine is operated on a test bench while the rest of the powertrain as well as the vehicle are simulated. By static engine measurements we demonstrate that the natural gas-Diesel engine reaches efficiencies of up to 39.5%. The engine is operated lean at low loads with low engine out nitrogen oxide emissions such that no nitrogen oxide aftertreatment is necessary. At medium to high loads the engine is operated stoichiometrically, which enables the use of a cost-efficient three-way catalytic converter. By vehicle emulation of a non-hybrid vehicle on the Worldwide harmonized Light vehicles Test Procedure (WLTP), we demonstrate that transient operation of the natural gas-Diesel engine is also possible, thus enabling a non-hybridized powertrain as well. [ABSTRACT FROM AUTHOR]

This paper studies the change in Energy Intensity (EI) of the main economic activities in the EU15 countries, which represents approximately 45% of their final energy consumption. The purpose is, first, to measure the different patterns between the countries by establishing differentiated typologies, and second, to investigate those reasons that explain the different trends by country. To attain our objective, the changes in EI are decomposed into their structural and efficiency components for EU15 countries for the period 1991-2005. Results reveal four different typologies for this set of countries, and show the importance of identifying those economic activities which, due to their special impact, are key to reducing energy consumption. The changes in the structural component are due mainly to a transformative process in which the importance of industry in the economy as a whole drops, while the opposite holds for services. However, the changes in the efficiency component do not seem to be linked to this same process. It does not appear as though the services sector resulted in a more efficient use of final energy. We have detected significant evidence of convergence for EI in the service sector that would help to understand the recent worsen evolution of EI in this sector (and in overall EI) of Southern European countries. It can also be concluded that an analysis of global EI change without distinguishing among its components can result in misleading conclusions and in improperly conceived Energy Policies. [ABSTRACT FROM AUTHOR]

For achieving the European renewable electricity targets, a significant contribution is foreseen to come from offshore wind energy. Considering the large scale of the future planned offshore wind farms and the increasing distances to shore, grid integration through a transnational DC network is desirable for several reasons. This article investigates a nine-node DC grid connecting three northern European countries--namely UK, The Netherlands and Germany. The power-flow control inside the multi-terminal DC grid based on voltage-source converters is achieved through a novel method, called distributed voltage control (DVC). In this method, an optimal power flow (OPF) is solved in order to minimize the transmission losses in the network. The main contribution of the paper is the utilization of a genetic algorithm (GA) to solve the OPF problem while maintaining an N-1 security constraint. After describing main DC network component models, several case studies illustrate the dynamic behavior of the proposed control method. [ABSTRACT FROM AUTHOR]

The following contribution is an excerpt from the unpublished memoirs of Austrian Jewish émigrée, Lilian Renée Furst (1931--2009), a pioneer in the field of comparative literature. This journal issue grew out of an April 2011 conference in her memory, held at the National Humanities Center, on "Jewish emigres and the Shaping of Postwar Culture." The nexus between her innovative intellectual contributions and her experience as a Jewish émigré reflects one of the conference's central concerns: How, why, and in what fashion did the émigrés' dislocations shape innovative intellectual paths and cosmopolitan visions of Europe and European culture. Born in Austria and educated in England, Furst pursued an intellectual career in the United States, hoping it would allow her to break out of narrow national boundaries. The excerpt of her memoir here illuminates how her life's work as a pioneer in the field of comparative literary studies grew out of her experience with language as a German-speaking refugee in wartime England. Her memoir written in the third person about "Rachel" also reflects her dual identity as Jew and European. Part I by Dr. Anabel Aliaga-Buchenau, the literary executor of the memoir and a former graduate student of Furst, places "The Rachel Chronicles: A Kind of Memoir" in relation to Furst's other autobiographical writing. Part II includes Furst's own introduction to "The Rachel Chronicles," followed by her chapter on "Growing up in wartime England." (The whole of her unpublished memoir is available to researchers in the "Personal Papers of Lilian R. Furst," Girton College Archives, Cambridge University (http://janus.lib.cam.ac.uk/db/node.xsp?id=EAD%2FGBR%2F0271%2FGCPP%20Furst)). Part III is a bibliography of Furst's writings. [ABSTRACT FROM AUTHOR]

Mycotoxins are secondary metabolites produced by fungi especially those belonging to the genus Aspergillus, Penicillum and Fusarium. Mycotoxin contamination can occur in all agricultural commodities in the field and/or during storage, if conditions are favourable to fungal growth. Regarding animal feed, five mycotoxins (aflatoxins, deoxynivalenol, zearalenone, fumonisins and ochratoxin A) are covered by EU legislation (regulation or recommendation). Transgressions of these limits are rarely observed in official monitoring programs. However, low level contamination by Fusarium toxins is very common (e.g., deoxynivalenol (DON) is typically found in more than 50% of the samples) and co-contamination is frequently observed. Multi-mycotoxin studies reported 75%-100% of the samples to contain more than one mycotoxin which could impact animal health at already low doses. Co-occurrence of mycotoxins is likely to arise for at least three different reasons (i) most fungi are able to simultaneously produce a number of mycotoxins, (ii) commodities can be contaminated by several fungi, and (iii) completed feed is made from various commodities. In the present paper, we reviewed the data published since 2004 concerning the contamination of animal feed with single or combinations of mycotoxins and highlighted the occurrence of these co-contaminations. [ABSTRACT FROM AUTHOR]

Forest biomass is an important energy source in Sweden and some other European countries. In this paper we estimate the physically available (i.e., total potential) forest biomass for energy from annual forest harvesting (1970--2008) or in the total standing stock (2008) in Sweden. To place Sweden's forest resources into perspective we relate this to an estimated need for renewable energy sources in Europe. As Swedish forests supply a range of goods and ecosystem services, and as forest biomass is often bulky and expensive to procure, we also discuss issues that affect the amount of forest biomass that is actually available for energy production. We conclude that forests will contribute to Sweden's renewable energy potential, but to a limited extent and expectations must be realistic and take techno-economical and environmental issues into consideration. To meet future energy needs in Sweden and Europe, a full suite of renewable energy resources will be needed, along with efficient conversion systems. A long-term sustainable supply of forest resources for energy and other uses can be obtained if future harvest levels are increased until they are equal to the annual growth increment. Delivering more than this would require increasing forest productivity through more intensive management. The new management regimes would have to begin now because it takes a long time to change annual production in temperate and boreal forests. [ABSTRACT FROM AUTHOR]

Climate change presents potential risks to forests and challenges for forest managers. Adaptation to climate change involves monitoring and anticipating change and undertaking actions to avoid the negative consequences and take advantage of potential benefits of those changes. Forest managers are accustomed to considering the long-term implications of their decisions. However, many are now responding to much shorter term economic or political imperatives. Climate change potentially increases the consequences of many existing challenges associated with environmental, social or economic change. Some current management measures may continue to be suitable in responding to increasing pressures under climate change, while for other situations new measures will be required. This special issue presents papers from Africa, Europe, and North America that provide examples of the type of analysis being implemented to support forest management in a changing climate. The implications in the context of uncertainty in climate projections and ecosystem responses are discussed. [ABSTRACT FROM AUTHOR]

As part of its climate strategy, the EU aims at increasing the share of electricity from renewable energy sources (RES-E) in overall electricity generation. Attaining this target poses a considerable challenge as the electricity sector is "locked" into a carbon-intensive system, which hampers the adoption of RES-E technologies. Electricity generation, transmission and distribution grids as well as storage and demand response are subject to important path dependences, which put existing, non-renewable energy sources at an advantage. This paper examines how an EU framework for RES-E support policies should be designed to facilitate a carbon lock-out. For this purpose, we specify the major technological, economic and institutional barriers to RES-E. For each of the barriers, a policy review is carried out which assesses the performance of existing policy instruments and identifies needs for reform. The review reveals several shortcomings: while policies targeting generation are widely in place, measures to address barriers associated with electricity grids, storage and demand are still in their infancy and have to be extended. Moreover, the implementation of policies has been fragmented across EU Member States. In this respect, national policies should be embedded into an integrated EU-wide planning of the RES-E system with overarching energy scenarios and partially harmonized policy rules. [ABSTRACT FROM AUTHOR]

Nowadays, subjects such as eco-design requirements, product rating or code compliance with regard to energy efficiency are expanding towards a pan-European level. This leads to the necessity of defining zones within the European region, which share common climatic characteristics and will further facilitate the quick estimation of building energy performance. Towards this direction stands the current paper; it presents an approach for defining climatic zones in Europe on the basis of the amount of heating and cooling degree days. It is applied for the climate classification of selected European cities and is compared with the conventional scheme based solely on heating degree days. Since the approach is orientated mainly towards the assessment of building energy performance, its outcomes are evaluated with regard to the actual heating and cooling energy needs of a reference building unit with office use located in representative cities of the proposed climatic zones and facing the four cardinal orientations. The classification of climatic zones on the basis of both heating and cooling degree days leads to more realistic results, since nowadays cooling needs form a substantial part of the energy balance of the building, especially in the Mediterranean regions. [ABSTRACT FROM AUTHOR]

Developing adaptation measures in forestry is an urgent task because the forests regenerated today will have to cope with climate conditions that may drastically change during the life of the trees in the stand. This paper presents a comprehensive review of potential adaptation options in forestry in Europe based on three pillars: a review of the scientific literature, an analysis of current national response strategies, and an expert assessment based on a database compiled in the COST Action ECHOES (Expected Climate Change and Options for European Silviculture). The adaptation measures include responses to both risks and opportunities created by climate change and address all stages of forestry operations. Measures targeted to reduce vulnerability to climate change may either aim to reduce forest sensitivity to adverse climate change impacts or increase adaptive capacity to cope with the changing environmental conditions. Adaptation measures mitigating drought and fire risk such as selection of more drought resistant species and genotypes are crucial. For adaptation to be successful it is of the utmost importance to disseminate the knowledge of suitable adaptation measures to all decision makers from the practice to the policy level. The analysis of the ECHOES database demonstrates that this challenge is well recognized in many European countries. Uncertainty about the full extent of climate change impacts and the suitability of adaptation measures creates a need for monitoring and further research. A better understanding of how to increase adaptive capacity is also needed, as well as regional vulnerability assessments which are crucial for targeting planned adaptation measures. [ABSTRACT FROM AUTHOR]

In this paper, a stochastic frontier model accounting for spatial dependency is developed using generalized maximum entropy estimation. An application is made for measuring total factor productivity in European agriculture. The empirical results show that agricultural productivity growth in Europe is driven by upward movements of technology over time through technological developments. Results are then compared for a situation in which spatial dependency in the technical inefficiency effects is not accounted. [ABSTRACT FROM AUTHOR]

This paper reviews the currently available optical sensors, their limitations and opportunities for deployment at Eddy Covariance (EC) sites in Europe. This review is based on the results obtained from an online survey designed and disseminated by the Co-cooperation in Science and Technology (COST) Action ESO903-"Spectral Sampling Tools for Vegetation Biophysical Parameters and Flux Measurements in Europe" that provided a complete view on spectral sampling activities carried out within the different research teams in European countries. The results have highlighted that a wide variety of optical sensors are in use at flux sites across Europe, and responses further demonstrated that users were not always fully aware of the key issues underpinning repeatability and the reproducibility of their spectral measurements. The key findings of this survey point towards the need for greater awareness of the need for standardisation and development of a common protocol of optical sampling at the European EC sites. [ABSTRACT FROM AUTHOR]

In Europe, heating of houses and commercial areas is one of the major contributors to greenhouse gas emissions. When considering the drastic impact of an increasing emission of greenhouse gases as well as the finiteness of fossil resources, the usage of efficient and renewable energy generation technologies has to be increased. In this context, small-scale heating networks are an important technical component, which enable the efficient and sustainable usage of various heat generation technologies. This paper investigates how the potential of district heating for different settlement structures can be assessed. In particular, we analyze in which way remote sensing and GIS data can assist the planning of optimized heat allocation systems. In order to identify the best suited locations, a spatial model is defined to assess the potential for small district heating networks. Within the spatial model, the local heat demand and the economic costs of the necessary heat allocation infrastructure are compared. Therefore, a first and major step is the detailed characterization of the settlement structure by means of remote sensing data. The method is developed on the basis of a test area in the town of Oberhaching in the South of Germany. The results are validated through detailed in situ data sets and demonstrate that the model facilitates both the calculation of the required input parameters and an accurate assessment of the district heating potential. The described method can be transferred to other investigation areas with a larger spatial extent. The study underlines the range of applications for remote sensing-based analyses with respect to energy-related planning issues. [ABSTRACT FROM AUTHOR]

Functioning ecosystems offer multiple services for human well-being (e.g., food, freshwater, fiber). Agriculture provides several of these services but also can cause negative impacts. Thus, it is essential to derive up-to-date information about agricultural land use and its change. This paper describes the multi-temporal classification of agricultural land use based on high resolution spotlight TerraSAR-X images. A stack of 14 dual-polarized radar images taken during the vegetation season have been used for two different study areas (North of Germany and Southeast Poland). They represent extremely diverse regions with regard to their population density, agricultural management, as well as geological and geomorphological conditions. Thereby, the transferability of the classification method for different regions is tested. The Maximum Likelihood classification is based on a high amount of ground truth samples. Classification accuracies differ in both regions. Overall accuracy for all classes for the German area is 61.78% and 39.25% for the Polish region. Accuracies improved notably for both regions (about 90%) when single vegetation classes were merged into groups of classes. Such regular land use classifications, applicable for different European agricultural sites, can serve as basis for monitoring systems for agricultural land use and its related ecosystems. [ABSTRACT FROM AUTHOR]

Information Systems (IS) interoperability in Public Administration (PA) is a main goal and a major challenge for PA professionals. Achieving interoperability among IS that are technologically disparate and that exist in different organizational contexts is a complex task, being affected by multiple aspects, not yet satisfactorily known and characterized. The aim of this paper is to unveil the forces that influence IS interoperability initiatives in PA. The inquiry was inspired by Lewin's Field Theory. The data generation process was based on a Delphi study involving 55 experts from PA, IS/IT industry, and academy. A set of 31 forces were identified and ranked based on the level of importance they assume in IS interoperability initiatives. Thirty eight propositions describing restraining and driving influences were also formulated, as well as 24 propositions about forces' configuration in the current context of Portuguese PA that represent the specific constellation of forces acting in IS interoperability initiatives in that country. The results of this study provide an understanding of the complex of forces acting in IS interoperability, contributing to improve the study, management, and implementation of these initiatives and, consequently, to the establishment of a PA with more adequate, sustained, and sustainable levels of interoperability. [ABSTRACT FROM AUTHOR]

In this article we explain the architecture for the environment and sensors that has been built for the European project URUS (Ubiquitous Networking Robotics in Urban Sites), a project whose objective is to develop an adaptable network robot architecture for cooperation between network robots and human beings and/or the environment in urban areas. The project goal is to deploy a team of robots in an urban area to give a set of services to a user community. This paper addresses the sensor architecture devised for URUS and the type of robots and sensors used, including environment sensors and sensors onboard the robots. Furthermore, we also explain how sensor fusion takes place to achieve urban outdoor execution of robotic services. Finally some results of the project related to the sensor network are highlighted. [ABSTRACT FROM AUTHOR]

In certain situations, internal insulation is the only possible renovation option. However, it is risky where there is high humidity in a building and ventilation is not working sufficiently. The internal insulation retrofit changes the original thermal and moisture balance of a wall, therefore, it is necessary to carefully design it already at the initial stage. This paper analyses four interior insulation systems based on open diffusion capillary active materials: wood fibreboards (flex and rigid), perlite boards, and microporous calcium silicate. The hygrothermal performance under the climatic conditions of Central Europe (Poland) was assessed using the WUFI Plus software, taking into account the dynamic variation of indoor and outdoor conditions. The analysis included three insulation thicknesses with different ventilation rates and varying moisture loads. The results show that the hygrothermal properties of the wall change with the increase of insulation thickness and depend on the individual moisture properties of the material. In addition, both the reduction of moisture load and more intensive air exchange improve the hygrothermal properties at the interface between the insulation and the wall. Of all the solutions analysed, the system with perlite board and the system with wood fibreboard showed the worst hygric properties. Conversely, the highest risk of mould and interstitial condensation was recorded for the flex wood fibreboard solution. [ABSTRACT FROM AUTHOR]

Simple Summary: This opinion paper describes the regulatory hurdles for a clinical oncologist and physician scientist to activate an Investigator-Initiated Trial (IIT) before and after 2004 with German regulation as an example. Changes in legal framework with impacts on time and costs to activate a clinical trial are described. Evidence needed to reach the objective of higher patient safety and trial quality by European Union (EU) Clinical Trial Directive (CTD) 2001/20 is discussed. Shortly after the beginning of the year 2000, multiple legal changes with impacts on the regulatory framework of clinical trials became effective almost simultaneously. They included the European Union (EU) Clinical Trial Directive (CTD) 2001/20 followed by major changes in national drug laws, the change in the legal status of German University Hospitals (1998), and a new disease-related groups (DRG)-based reimbursement system for hospitals in Germany (2000). Together, these changes created enormous bureaucratic and financial inhibition of activation and conduct of academic investigator-initiated clinical trials (IIT). Examples for activating clinical trials in oncology before and after 2004 are outlined and discussed, focussing on extended time frames, the establishment of centralized responsibility structures and the exploding financial consequences. In addition, the evolution of trial numbers and the distribution of trial initiators between "commercial" and "academic" over time are discussed together with the occurrence of clinical registries. At the same time, progress in molecular biology led to a plethora of new targets for effective pharmacological therapy of life-threatening diseases such as cancer, and the overall number of clinical trials has not decreased. Yet, judging the regulatory and administrative hurdles between scientific study design and first-patient on trial before and after 2004 and weighing these against the lack of evidence that this regulation has achieved its goal to enhance patient safety and trial quality, the necessity to completely overhaul this CTD becomes obvious. A main goal of such an initiative should be to minimize bureaucracy. For the specific situation in Germany, relocation of responsibility and freedom to operate in University Hospitals and Medical Faculties back to the physician–scientists and reduction in interference by legal divisions should be a goal as well as increasing the public financial support for IITs. [ABSTRACT FROM AUTHOR]

Greening structures attract worldwide attention because of their multidisciplinary benefits. Green roofs are considered one of the best ways to eliminate summer overheating, mitigate climate change, or reduce the urban heat island effect. The winter season and its impact on building energy consumption are often overlooked. Common standards do not take a green roof structure into consideration because of possible high water content in their layers. Additional roof layers may have a positive effect during the winter; they help reduce surface overcooling in cloudless winter nights. This paper analyses experimental measurements taken on two different extensive green roofs and compares the results with a single-ply roof (R) with a PVC membrane. Surface overcooling of the R due to radiation reaching up to 10 °C, whereas the green roof membrane is protected. The influence of thermal loss is not so important for the current climate in Central Europe, as the required U-values are lower than 0.1. The temperature difference is reduced from 17 °C on the membrane to 0.7 °C on the top of the concrete slab. The green roof is still advantageous, and the vegetation surface has better thermal stability. The advantage is clearly recognisable in the area of the condensation zone. The difference between these two extensive green roofs is very small in regard to the accuracy of the temperature sensors. The outcome showed the thermal loss reduction compared to the common flat roof; however, after analysis, it was more marginal than expected. [ABSTRACT FROM AUTHOR]

Regional climate change affects the state of inland water bodies and their water balance, which is determined by a number of hydrometeorological and hydrogeological factors. An integral characteristic of changes in the water balance is the behavior of the level of lakes and reservoirs, which not only largely determines the physical and ecological state of water bodies, but also significantly affects the coastal infrastructure and socio-economic development of the region. This paper investigates the interannual variability of the level of the Ladoga and Onega lakes, the largest lakes in Europe located in the northwest of Russia, according to satellite altimetry data for 1993–2020. For this purpose, we used three specialized altimetry databases: DAHITI, G-REALM, and HYDROWEB. Water level data from these altimetry databases were compared with in-situ records at water level gauge stations. Information on air temperature (1945–2019) and precipitation (1966–2019) acquired at three meteostations located at Ladoga and Onega lakes was used to investigate interannual trends in the regional climate change. Finally, we discuss the potential impact of the lake level rise and regional climate warming on the infrastructure and operability of railways in this region. [ABSTRACT FROM AUTHOR]

In the acceleration phase transitions often increase in depth and scope, and thereby create knock-on effects for wider system structures. In the renewable energy transition, for example, higher shares of intermittent renewable energy sources call for new grid technologies to increase flexible grid operation. At the same time, there are different ways of achieving renewable energy transitions and providing flexibility. In Europe, important tensions exist over how centralised or decentralised a renewable energy electricity system should be. This paper explores to what extent and how European framework programmes for research and development have addressed and supported innovation in transmission grid (centralised system) and distribution grid (decentralised) technologies. We analyse European R&D projects that studied electricity grid planning, development and innovation over 2002–2020. We apply social network analysis of the collaboration partners in these projects, and analyse the calls for proposals issued by three European Framework Programmes: FP6, FP7 and Horizon 2020. The framework programmes have addressed energy-related issues, but the priorities have changed over time, reflecting the ongoing energy transition. We ask if the importance of transmission grid vs. distribution grid has changed over time, and if and how the collaboration patterns have changed. [ABSTRACT FROM AUTHOR]

Nowadays, buildings renovation is a subject of special interest since the building and construction sector is the main body responsible for energy consumption and emissions. Hence, it is necessary to concentrate on refurbishment to achieve Europe's climate neutrality by 2050 according to European Agenda goals. The BIM4EEB Project, a BIM-based fast toolkit for the efficient renovation of residential buildings, directs the attention toward developing an exhaustive toolkit based on Building Information Modeling (BIM) to be adopted in the renovation of existing residential buildings, to make the flow of information efficient, decreasing intervention working time while improving building performances, quality, and comfort for inhabitants. BIM4EEB is developing a BIM management system connected to an operational and multifunctional toolkit for various architecture, engineering, and construction (AEC) stakeholders, integrating a set of tools for improving BIM adoption in renovation environments based on an interoperable flow of information. This paper presents the Horizon2020 Project and the framework used to develop the toolkit. In addition, the first outcomes of the toolkit development are outlined. The validation procedure in real environments has started to demonstrate the efficacy and applicability of the methodology and tools. Although the project is still in progress, benefits connected to the framework and the BIM-based toolkit result in an enhanced building renovation process. [ABSTRACT FROM AUTHOR]

Diabetes is a metabolic disease that affected 9.3% of adults worldwide in 2019. Its co-occurrence is suspected to increase mortality from COVID-19. The treatment of diabetes is mainly based on the long-term use of pharmacological agents, often expensive and causing unpleasant side effects. There is an alarming increase in the number of pharmaceuticals taken in Europe. The aim of this paper is to concisely collect information concerning the few antidiabetic or hypoglycaemic raw plant materials that are present in the consciousness of Europeans and relatively easily accessible to them on the market and sometimes even grown on European plantations. The following raw materials are discussed in this mini-review: Morus alba L., Cinnamomum zeylanicum J.Presl, Trigonella foenum-graecum L., Phaseolus vulgaris L., Zingiber officinale Rosc., and Panax ginseng C.A.Meyer in terms of scientifically tested antidiabetic activity and the presence of characteristic biologically active compounds and their specific properties, including antioxidant properties. The characteristics of these raw materials are based on in vitro as well as in vivo studies: on animals and in clinical studies. In addition, for each plant, the possibility to use certain morphological elements in the light of EFSA legislation is given. [ABSTRACT FROM AUTHOR]