Search

The sufficient utilization of the mega data acquired from operative power units is a promising way leading to high efficient, clean and safe operation of power plant. Hereinto, data filtering is a critical link to the data-driven dynamic model identification aiming at optimizing the process control. The machine learning is an advantageous approach for filtering usable data from mega databases for identification due to its effective statistical learning strategy to the field data with noises, disturbances and coupling quantities. Therefore, a data filtering method of combining Gaussian Naive Bayesian classifier and prediction error method (Gaussian NB-PEM) is proposed in this paper. Firstly, variables associated with identification model are selected by analyzing the characteristics of the process. Secondly, the GaussianNB classifier is used for coarse data filtering by calculating the priori probability of each attribute from training sample set and the probability with all possible values of the known categories for testing sample set. Thirdly, the prediction error method is used for further data filtering based on model fitting. By using the filtered closed-loop data, the dynamic characteristics of the superheated steam temperature is modeled and verified by closed-loop control simulation, showing the validity of the Gaussian NB-PEM data filtering method.

Deadlock prevention policies are used to solve the deadlock problems of FMSs. The theory of regions is recognized as the unique method for obtaining maximally permissive (i.e., optimal) controllers in the existing literature. In this paper, the selective siphons and critical markings method [17] is merged in the new deadlock prevention policy. First of all, reachability graph is still needed. Second, CMTSIs are identified. Further, selective siphons and critical markings method is used to check if all dead/quasi-dead markings of CMTSIs are covered by these selective siphons. Furthermore, choose anyone CMTSI that belongs to a same selective siphon to be processed. Finally, controllers are therefore obtained. Experimental results indicate that the computational cost can be reduced again. Besides, it is the most efficient policy to obtain maximal permissive behavior of Petri net models.

The classification of color image that contain skin pixel is a challenging process. It is challenging due to certain factor such as brightness, background similar to human skin represent the obstacles thereof. The basic approach of skin detection is color based classification. The human skin image is the composition of RGB color. The data values of skin is calculated by randomly sampling RGB color values of different face images which have different age, race, genders sets. However, its performance has not really been high because of the high overlapped degree between “skin” and “non-skin” pixels. This paper describes the linear norm fuzzy based twin support vector machine (LN-FTSVM)) approach for discriminate skin and non-skin data values of skin dataset and to enhance the skin recognition performance. The concept of fuzzy is resolved the unclassified and overlapped data region problems. If no decision function is positive for a data set, this data set is classified into a class with the large membership value. By computational experiments shows that Experiments result shows that the accuracy is improved by linear norm fuzzy based TSVM (LN-FTSVM)) over the conventional methods.

In this paper, the generalized detector (GD) constructed on the basis of the generalized approach to signal processing in noise is employed by synthetic aperture radar (SAR) system to define a target location. The GD is proposed to solve the common problem of target detection at the very low signal-to-noise-ratio (SNR) when the conventional detection algorithms are not able to do it. Simulation results demonstrate a GD performance superiority in comparison with the search for undefined maritime objects (SUMO) detector one.

Delivering reliable service requires satisfactory operation of numerous line components, spanning significant geographical areas and subject to environmental, electrical, and mechanical stresses, plus normal aging. Conventional reliability practices use periodic maintenance to minimize failures, coupled with rapid restoration procedures when outages occur. Reliability statistics have shown little change in decades. Newer technologies can shorten outages, by automatically rerouting service to customers on healthy feeder segments, but they: require redundant paths for power flow; react only after outages occur; and often require communications with pole-mounted switches. Over the past decade, Texas A&M University has demonstrated that electrical waveforms, available via conventional substation-based CTs and PTs, contain evidence of failures, incipient failures, and improper operation of feeder equipment, often well before these conditions escalate and cause outages. This provides the basis for conditioned-based maintenance and outage avoidance. This paper provides examples, from operating feeders, demonstrating some of these advances.

The Cygnus Dual Beam Radiographic Facility consists of two identical radiographic sources each with a dose rating of ∼4-rad at 1 m, and a ∼1-mm diameter spot size. The development of the rod pinch diode (RPD) was responsible for the ability to meet these criteria. The RPD in each machine uses a 0.75-mm tungsten diameter tapered anode rod extended through a 9-mm diameter cathode aperture. When properly configured, the electron beam born off the aperture edge can self-insulate and pinch onto the tip of the rod creating an intense, small x-ray source. These sources are utilized in concert with an imaging system on complex experiments, which are single-shot, high-value events. In such an application there is an emphasis on machine performance (reliability and reproducibility). Vacuum quality is a significant determinator for source performance. In this paper we discuss the Cygnus Dual Beam Radiographic Facility, the associated vacuum systems, vacuum monitor calibration and a multi-purpose vacuum chamber. Vacuum system performance, using various enhancements, will be reported. Using the vacuum system enhancements, as well as other machine tweaks, recent source performance has improved. This new level of performance will be presented via dosimetry and electrical measurements.

This paper presents a method for characterizing chemical solutions using nanowire field effect transistors. A pulsed gate potential method is used to prevent instabilities related to the dynamics of ions and other charged species present in the solution. Applying this method realizes a significant increase of the stability of the drain current versus gate potential characteristics of the devices, enabling reproducible characterization of chemical solutions with nanowire field effect transistors in aqueous environments.

Network coding has been applied successfully in peer-to-peer systems to shorten the distribution time, particularly in extreme conditions where peers in the network are clustered and separated by physical links with limited bandwidth. In this paper, we focus more closely on the use of source coding, i.e. encoding is done only at the source, as an alternative to network coding to facilitate content distribution under such limited bandwidth configuration. We observe analytically and experimentally that, in this specific case, with appropriately chosen expansion factors, source coding can have comparable performance to network coding in terms of distribution time, yet consuming much less computational resources than the latter approach does.

Ontologies have been designed for the purpose of representing a domain of knowledge in a way that makes it understandable by machines and humans. Ontologies have been used in many areas in computer sciences such as knowledge engineering, semantic web, and information retrieval. Religious studies is one of the areas were ontologies are in demand. In this paper, we present the design of domain ontology about prophets and messengers in Islam from trustworthy resources: the Quran and Hadith. The ontology can be used to better understanding all life aspects of prophets and messengers in Islam. The classes, relations and properties of this special domain ontology were gathered and integrated to help researchers to identify and explore knowledge about prophets in Islam such as their lives, books and teachings, the nature of the messages they brought to their nations and tribes and much more.

Air quality and fuel efficiency has become important factors in decision-makings on urban traffic planning and management. To support the process, simulation models have potential to play essential roles in evaluation of planning alternatives and control strategies. However, traffic and its environmental impacts are different processes and often require various levels of models. With concerns on high computing performance and rich functionalities, it may be not appropriate to model emission inventory within traffic simulation. In this paper, we present a distributed simulation approach, and an independent emission/energy computing platform is built to simulate, visualize and analyze online emission outputs, given a microscopic traffic simulation tool, KTH-TPMA. Two distributed computing frameworks, common objects request broker architecture (CORBA) and service oriented architecture (SOA), are adopted in the distributed software design and implementation. Several emission models are implemented and generally evaluated in micro simulation runs of two road networks.