Search

Timely identification of the aging stage of the transformer can effectively ensure the safe operation of the transformer and prevent the aging fault of the transformer. This work proposes the aging diagnosis of transformer using the Raman spectroscopic recurrence plot combined with learning vector quantization (LVQ) neural network. Oil-paper insulation samples at different aging stages are obtained by accelerated thermal aging tests. Acquisition of Raman spectra of insulating oil is from 800 to 3000 cm−1 and converts to the Raman spectroscopic recurrence plot. The gray-level cooccurrence matrix (GLCM) is used to extract the characteristic information of the Raman spectroscopic recurrence plot. The optimal number of neurons in competitive layer of LVQ neural network is determined by the experimental method. A transformer aging diagnosis model based on the Raman spectroscopic recurrence plot is established. The results show that the diagnostic accuracy of the proposed diagnostic model reached 95%. The Raman spectroscopic recurrence plot has more abundant aging “fingerprint” characteristic information and the proposed diagnostic method shows potential for monitoring oil-paper insulation. [ABSTRACT FROM AUTHOR]

The ecological environment is increasingly damaged due to the impact of mineral oil extraction and leakage. As a kind of sustainable resource, a vegetable oil transformer has bright application prospects in future. However, the stability of vegetable oil has always been a problem to be solved. In addition, the metallic copper inside the transformer has a certain catalytic effect on the deterioration of vegetable oil. In this article, a copper–oil–paper insulation model is established. Based on the molecular dynamics simulation method, the catalytic mechanism of copper on the deterioration of oil-paper insulation is revealed from the microscopic level. Then, the effects of temperature, contact area, and oxygen on the catalytic effect of copper are discussed. The results show that copper could accelerate the decomposition of oil-paper insulation by attracting H atoms and O atoms in oil-paper. The increase in temperature accelerates the progress of the catalytic reaction and aggravates the deterioration of oil-paper insulation. The oxygen concentration has an important influence on the catalytic reaction of copper. As the oxygen concentration increases, the catalytic effect of copper is weakened. The abovementioned research could provide some theoretical reference for further exploration of effective oil-paper insulation deterioration protection technology. [ABSTRACT FROM AUTHOR]

Methanol is considered to be a new chemical marker to estimate the aging state of transformer cellulose insulation paper. The key to improve the assessment accuracy is to establish the precise relationship between the concentration of methanol in oil and degree of polymerization (DP) of insulation paper. The previous research in this area has shortcomings and needs to be further improved. In this article, first, an aging assessment basic model (temperature 20 °C, moisture content of insulation paper 0.637%) is established based on the theoretical derivation of cellulose degradation kinetics, and is calculated by 130 °C thermal aging experiment. Furthermore, the effects of different temperatures (20 °C–90 °C) and moisture contents of insulation paper (0.6%–3.4%) on methanol in oil are studied by diffusion experiment. Based on the above effects, the temperature and moisture correction factors are established by mathematical reduction. What is more, a modified model is proposed by integrating the basic model and the correction factors. Eventually, the verification experiment is randomly prepared to test the accuracy of modified model and the result shows that the relative error of DP is within 7%. The physical meaning and accuracy of aging assessment are improved by model derivation and modification of influencing factors. [ABSTRACT FROM AUTHOR]

Oil impregnated paper in power transformers deteriorates in long-term operation, which leads to the variations of its dielectric characteristics. This paper focuses on investigating the generation mechanism of the dielectric processes in oil impregnated paper and their variations with thermal aging. Firstly, a set of thermally stimulated current tests with bias-voltages were conducted in distinguishing the dielectric processes and revealing their generation mechanism. Secondly, the standard thermally stimulated current spectrum and the M″ spectrum of 0–1000 h aged samples were joint analyzed in investigating the variations of dielectric processes in thermal aging process. Finally, additional experiments of moisture, acidity and microscopic observation were conducted in explaining these variations. It is concluded that three dielectric processes can be found in oil impregnated paper, i.e. the dipole polarization, the interfacial polarization and the electric conduction. These processes are all strengthened with thermal aging. The generation of molecules with strong polarity, the structural changes in insulating paper, and the generation of hydrogen ions are responsible for the strengthening of these processes sequentially. This investigation on distinguishing dielectric processes and obtaining their mechanism can promote further understanding on oil impregnated paper and provide information for insulation design in power transformers. [ABSTRACT FROM PUBLISHER]

Objective: Early stage diagnosis of sepsis without overburdening health services is essential to improving patient outcomes. Methods: A fast and simple-to-use platform that combines an integrated circuit with paper microfluidics for simultaneous detection of multiple-metabolites appropriate for diagnostics was presented. Paper based sensors are a primary candidate for widespread deployment of diagnostic or test devices. However, the majority of devices today use a simple paper strip to detect a single marker using the reflectance of light. However, for many diseases such as sepsis, one biomarker is not sufficient to make a unique diagnosis. In this work multiple measurements are made on patterned paper simultaneously. Using laser ablation to fabricate microfluidic channels on paper provides a flexible and direct approach for mass manufacture of disposable paper strips. A reusable photodiode array on a complementary metal oxide semiconductor chip is used as the transducer. Results: The system measures changes in optical absorbance in the paper to achieve a cost-effective and easily implemented system that is capable of multiple simultaneous assays. Potential sepsis metabolite biomarkers glucose and lactate have been studied and quantified with the platform, achieving sensitivity within the physiological range in human serum. Conclusion: We have detailed a disposable paper-based CMOS photodiode sensor platform for real-time simultaneous detection of metabolites for diseases such as sepsis. Significance: A combination of a low-cost paper strip with microfluidic channels and a sensitive CMOS photodiode sensor array makes our platform a robust portable and inexpensive biosensing device for multiple diagnostic tests in many different applications. [ABSTRACT FROM AUTHOR]

Under long-term synergy effect of multi-factors, especially the thermal stress, insulating paper will be degraded and its insulation performance will decline due to carbonization and degradation of cellulose. This paper presents an optical approach for aging feature extraction of the insulating paper, where one of the image processing methods called texture analysis is utilized. By conducting laboratory accelerated thermal aging tests, insulating paper samples with different aging conditions for both Nomex and Kraft, evaluated with the aging time, are prepared. After taking optical microscopic images of insulating paper samples belong to different aging groups, up to 14 texture features are extracted using the gray-level co-occurrence matrix (GLCM). With different feature selection methods applied, several of them are finally selected to represent the aging condition of insulating. Numerical tests with both supervised and unsupervised algorithms, as well as a linear regression method verifies the validity of these features in characterizing the aging condition of the insulating paper. [ABSTRACT FROM PUBLISHER]

This paper investigates the aging properties of oil-paper insulation under thermocorona discharge. The oil-paper insulation samples were heated and kept at 140°C, and a corona discharge was generated with a needle-plate at a frequency of 15 times/day, with each discharge lasting 5 minutes. The aging properties of oil-paper insulation were investigated by measuring the degree of polymerization (DP) of insulation paper samples along with the furfural content and acid value of the transformer oil samples. The results show that corona discharge at 140°C in oil rapidly decreased the insulation paper DP and increased the furfural content and acid value of the oil compared with thermal aging and corona discharge aging at 20°C. The DP of the insulation paper was reduced to 392.12, the furfural content in oil rose to 33.75 mg/L, and the acid value grew to 4.41 mgKOH/g after 15 days under the combined thermal stress and corona discharge. Both electric and thermal stress accelerated the aging of oil-paper insulation. This research has practical significance for understanding the process of insulation failure caused by the accelerated aging of oil-paper insulation. [ABSTRACT FROM AUTHOR]

The carbon oxides (CO2 and CO) in the insulating oil of power transformers come from the thermal aging of cellulosic insulating paper; the CO2/CO ratio can reflect the aging state of cellulosic insulating paper. At present, the formation mechanisms of CO2 and CO in oil-immersed power transformers are still unclear. In this article, the ReaxFF reaction force field is used to simulate the thermal aging process of cellulosic insulating paper, and the main reaction pathways of CO2 and CO molecules formed by cellulose pyrolysis are obtained. The study finds that the amount of CO2 and CO generated is related to temperature. When the pyrolysis temperature continues to rise, the amount of CO2 generated shows a downward trend, while the amount of CO generated continues to increase, and the CO2/CO ratio continues to decrease. The simulation results are consistent with the previous experimental results. Through pathway tracking, it is found that the CO2 and CO molecules are mainly derived from certain specific atoms of cellulose molecules. The COSMO-RS module is used to analyze the change trend of the solubility of CO2 and CO in insulating oil with temperature. The results show that the solubility of CO2 and CO decreases with the increase of insulating oil temperature, which provides theoretical support for accurate application of carbon oxides aging evaluation index at different temperatures. [ABSTRACT FROM AUTHOR]

Furfural content in oil has been shown to be a powerful indicator of the deterioration of cellulose paper. The furfural content in oil may increase greatly when the moisture content increases in transformers. The increase of furfural content in oil can be attributed to various factors, such as aging of cellulose paper with the increase of moisture content and the difference in furfural production mechanism. In this research, thermal aging tests of oil-paper system with different moisture contents are conducted under laboratory conditions to determine the cause of such increase. Furfural content, both in insulation oil and in insulation paper, and the degree of polymerization values of insulation paper were regularly measured. Results show that the moisture content plays a significant role on the production of furfural, and the high initial moisture content in insulation paper leads to large amount of furfural produced when DP decreases to the same values. The difference in the moisture content apparently affects the distribution of furfural between oil and paper, and the increase in the moisture content in oil-paper system increases the diffusion of furfural from the insulation paper to the oil. [ABSTRACT FROM AUTHOR]

It is known that 1,2,3 benzotriazole (BTA) can effectively limit the oil flow electrification in oil–paper insulation used in HVAC transformers, but it is still unclear whether BTA is applicable to converter transformers. Thus, the effects of BTA on interface charge behaviors and charge migration in oil–paper system under dc stress are investigated in this article. The experimental results show that BTA reduces the interface barrier between oil and oil-immersed paper by altering the charge distribution of the electric double layer (EDL) at the oil–paper interface, which is beneficial to the operation stability of converter transformers in the condition of polarity inversion. However, it is also found that the BTA additive promotes the charge accumulation at oil–paper interface and enhances the local electric field by increasing the carrier mobility of oil–paper insulation. The experimental results in this article provide references for the selection of insulating oil additives for converter transformers. [ABSTRACT FROM AUTHOR]

Digital Object Identifier 10.1109/ TSM. 2024.3411140Authorized licensed use limited to the terms of the applicable license agreement with IEEE. Restrictions apply. Authorized licensed use limited to the terms of the applicable license agreement with IEEE. Restrictions apply. [Extracted from the article]

Digital Object Identifier 10.1109/ TSM. 2024.3442019Authorized licensed use limited to the terms of the applicable license agreement with IEEE. Restrictions apply. Authorized licensed use limited to the terms of the applicable license agreement with IEEE. Restrictions apply. [Extracted from the article]

A quantitative analysis supports the argument that very low acceptance rates of conference papers are more likely to impede publication of bold and innovative research results than to indicate the chosen papers' prestige and elite status. [ABSTRACT FROM AUTHOR]

This note clarifies an important approximation used to simulate the breakdown field in the SiO2 liner of a SiC Charge-Sheet Superjunction - a new power device structure - reported by Akshay and Karmalkar (2020). This electric field simulation sought to assure that the new device does not suffer from SiO2 reliability problems. The note answers two questions: (a) Why do we remove the SiO2 liner which is the very region of our interest during device simulation, when a simulator allows inclusion of such a region? (b) How can one solve for the field in a region (SiO2 in the present case) by neglecting that very region during device simulations? Our note reinforces the insight - “Modeling is the art of making approximations”.

To Keep up with the trend toward open access in science and technology publications, IEEE has created a number of open access journals including the IEEE Open Access Journal of Power and Energy (OAJPE). At present, due to the great number of emerging technologies in power and energy systems, our research and industrial communities are undergoing an unprecedented paradigm change.

The effects of furfural generation and partitioning on the aging assessment of oil-paper insulation of power equipment were investigated. Oil-paper samples with various furfural contents were prepared using an accelerated thermal aging experiment. The mass of the furfural generated during the aging of insulation paper was calculated and used to establish the quantitative equation between the accumulated furfural and the degree of polymerization (DP) of the insulation paper. Results showed that the reciprocal of the DP value was linearly related to the amount of furfural generated by the insulation paper. Effects of temperature, moisture, and temperature on the furfural partitioning ratio between oil and paper were analyzed using a furfural partitioning experiment, and a furfural partitioning model was established. Results showed that the furfural partitioning ratio in oil was positively correlated with temperature and moisture but negatively correlated with the DP of the insulation paper. A method for assessing the age of an insulation paper by integrating the furfural generation and partitioning models was proposed and applied on a 500-kV reactor that was returned for factory maintenance. The application result indicated that the method could accurately assess the overall aging condition of the oil-paper insulation of the power equipment. [ABSTRACT FROM AUTHOR]

In this paper, seven groups of sheet insulation for use in liquid nitrogen immersed power transformers have been tested under three different standard electrodes from ASTM D149-97a. The seven groups consist of three different types of paper/film, nonadhesive Kapton 100 HN (Kapton), THERNOMID 14.20 paper (NMN), and Nomex 410 paper (Nomex). The porous paper, Nomex 410, is found to have ac dielectric strength of 62–68 kV/mm, which is likely to be independent from its thickness. The nonporous film, Kapton, shows the dielectric strength of 288 kV/mm, whereas NMN paper has a dielectric strength of 74–78 kV/mm, larger than Nomex with similar thickness. Liquid nitrogen gaps near the triple junction of electrodes as well as liquid nitrogen pockets between the fibers are the main sources of partial discharge (PD) for NMN and Nomex. For Kapton, PDs are more likely to occur in the cavities filled with liquid nitrogen, either on the surface of the electrode or around the impurities on the surface of the film. Electrodes with a small stressed volume are more appropriate for dielectric tests of thin paper/film insulation, such as Kapton, due to the lower influence of cavities on the electrode surface. In contrast, electrodes with a large stressed volume and uniform electric field distribution are suitable for the papers such as Nomex and NMN. [ABSTRACT FROM AUTHOR]

As sugar is an important intermediate in the early stage in the degradation of cellulose, this paper proposes to use the concentration of total sugar as an indicator of the degree of aging of insulating paper in an oil-paper insulation system. The oil-paper insulation system was simulated at 90, 100 and 110°C, and total sugar concentration in insulating paper and in transformer oil was measured by spectroscopy. The spectrum of sugar reaction was obtained by spectrometer, and TQ Analyst software was used to process the data. Our experiments have shown that the total sugar concentration increases significantly in the early stage of aging, and there is a linear relationship between the logarithm of total sugar concentration and the degree of polymerization. We obtained the relationship between absorbance and total sugar concentration using the partial least square method and the regression goodness of fit is better than 0.91. [ABSTRACT FROM AUTHOR]

The Editorial Board of the IEEE Open Access Journal of Power and Energy (OAJPE) would like to recognize the following best papers published between October 2017 and September 2020 in OAJPE and its preceding journal, IEEE Power and Energy Technology Systems Journal (PETS-J). Also presents a list of reviewers who contributed to this publication in 2021.

Cellulosic insulating paper is the essential component of the insulation in power transformers. Under the thermal stress inside the transformer, the cellulosic insulating paper degrades and generates formic acid. Meanwhile, the presence of formic acid further accelerates the aging process of cellulosic insulating paper. This study takes the cellulose molecule composed of D-glucose as the research object. The ReaxFF reactive force field is applied to simulate the high-temperature thermal aging process of cellulosic insulating paper. During pyrolysis process, the number of formic acid molecules presents short-term fluctuations and continuous increases. Though simulation, the main reaction pathways of cellulose pyrolysis to generate formic acid are obtained. In addition, an accelerated thermal aging experiment of oil-paper insulation is designed. The formic acid in the experimental samples is detected by the silanization derivatization method. Through the combination of simulation and experimental results, the feasibility of formic acid as an aging indicator for cellulosic insulating paper is further demonstrated. [ABSTRACT FROM AUTHOR]

Prospective authors are requested to submit new, unpublished manuscripts for inclusion in the upcoming event described in this call for papers. [ABSTRACT FROM AUTHOR]

This work investigates which acid can mainly lead to the reduction of alcohols contents in insulating oil during transformer oil-paper insulation aging. In terms of the activation free energy barrier theory, the microscopic mechanisms for the preferential reactions of methanol and ethanol with formic, acetic, naphthenic and stearic acids are analyzed. It is revealed that the decrease in alcohols concentrations in the middle and late stages of transformer oil-paper insulation aging is mainly caused by the reaction between alcohols and naphthenic acid. The results are cross-validated by utilizing the frontier molecular orbital theory and accelerated thermal aging experiments. Additionally, it is observed that methanol is more susceptible to the effect of acids than ethanol in the middle and late stages of aging. The obtained conclusions, in this paper, could provide a theoretical basis for using alcohols in oil as aging indicators to characterize the full-stage aging status of transformer paper insulation. [ABSTRACT FROM AUTHOR]

Raman spectroscopy is an effective method for diagnosing the aging state of transformer oil-paper insulation. Aiming at overcoming the drawback of previous methods that require a large number of training samples, this research proposes a method for aging diagnosis of oil-paper insulation that can be used for few-shot learning. In this study, different Raman spectroscopy samples of aging insulating oil are obtained by accelerated thermal aging experiments. This paper uses identity matrix as node feature, calculates the connection weights between them by Gaussian kernel function, and constructs the graph structure of Raman spectroscopy library. Using graph convolutional neural network (GCN) based on the graph structure, a diagnosis model is established. The diagnostic accuracy rate is as high as 95.5%. This method provides a theoretical basis for establishing a new structured Raman spectroscopy library and assessing the aging state of transformer oil-paper insulation with a small number of training samples. [ABSTRACT FROM AUTHOR]

As an important piece of equipment of ultrahigh-voltage direct current, the valve side of a converter transformer contains a large dc component prone to partial discharge (PD) under the action of a slightly uneven electric field, which can be simulated using a wedge electrode. To study the PD characteristics of oil–paper insulation under a wedge-shaped electrode, a 2-D axisymmetric simulation model was established based on the bipolar-charge transport theory and the fluid dynamics drift-diffusion theory. The microscopic discharge images at nanosecond scale under different dc voltage polarities were calculated, and the change process of the space charge and electric field intensity distribution was obtained. The effects of the voltage amplitude, polarity, and dielectric constant on PD characteristics are discussed. The simulation results show that the discharge pattern and velocity exhibit a notable polarity effect. This polarity effect is related to the adsorption of the cellulose hydroxyl group to negative charge, which leads to the amplitude of the homopolar charge accumulated in negative polarity being greater than that accumulated in positive polarity under the same applied voltage intensity so that the homopolar charge has a greater barrier to the discharge. This type of adsorption is positively correlated with the difference of dielectric constant between the paperboard and insulating oil. The results of this study are of great theoretical significance for elucidating the dc discharge mechanism under wedge electrodes. [ABSTRACT FROM AUTHOR]

This study investigates the effect of moisture content on space charge characteristics based on the dynamic space charge response and conductivity characteristics of oilpaper insulation under a DC electric field. Moisture contents ranging from 0.34–2.89% are considered under an electric field of up to 20 kV/mm. The results show that homocharge accumulates inside the oil-paper insulator near both electrodes, with the amount of charge gradually increasing as the moisture content rises. It may be related to the decreased charge injection barrier at the electrode-sample interface as the moisture level increases. The conductivity increases with the rise in moisture level. However, as the conductivity increases, the corresponding space charge accumulation during polarization does not decrease, but increases significantly. This indicates that space charge accumulation may be related to both charge injection and conductivity. The electric field distortion inside the oil-paper insulator increases as the moisture content rises, with the maximum electric field distortion rate going from 16.9 to 92.9% at 5 kV/mm and from 29.7 to 62.5% at 20 kV/mm. [ABSTRACT FROM AUTHOR]

Oil-paper insulation of higher voltage winding and traction winding in on-board traction transformers frequently withstand large AC fluctuation voltages mainly combined with AC and inter-harmonic components. This paper presents the characteristics of partial discharge (PD) of oil-paper insulation under superimposed inter-harmonic AC voltages. The experimental results show that the addition of the inter-harmonic to the fundamental sinusoidal component results in variation of peak voltage and dv/dt along the phase. This superimposed inter-harmonic AC voltages has a significant impact on PD including partial discharge inception voltage (PDIV), breakdown voltage, PD repetition rate, and phase resolved partial discharge (PRPD). In addition, a dynamic characterization method of PD statistical parameters is proposed to determine the developing trend. The critical values and inflection points of PD are obtained. Besides, the theoretical mechanism is expounded to better interpret and understand the influence of inter-harmonic component on PD properties. These methods will provide the dynamic datasets and more information for insulation condition assessment of on-board traction transformer. [ABSTRACT FROM AUTHOR]

The present study sets out to devise a universal function model to explain the characteristic curve obtained in the frequency domain spectroscopy (FDS) test on oil-paper insulation, based on its microscopic conduction and relaxation processes, and thus to enhance the accuracy and applicability of the test. First, from the analysis of the relationship between the real and imaginary parts of the dielectric's complex permittivity, it is demonstrated that a relaxation peak co-exists with the conduction process in the low-frequency band of an FDS curve obtained for oil-impregnated paper sample. Second, values for polarization barrier heights, essential to the determination of the microscopic polarization mechanisms, are presented as results of FDS and thermally stimulated depolarization current experiments carried out on oil-impregnated paper samples. The polarization peaks obtained in the imaginary permittivity frequency spectrum are determined as, respectively, space charge polarization and interface polarization. Finally, a function model in good agreement with experiment data is proposed, which quantitatively describes the FDS curve in oil-impregnated sample, including two relaxation processes and one conduction process. [ABSTRACT FROM AUTHOR]

Being an offline measurement technique, Polarization Depolarization Current (PDC) data is conventionally measured after the oil-paper insulation of the equipment reaches thermal equilibrium. Depending on the condition of the insulation, PDC data measurement time typically ranges from several minutes to few hours. It is understood that atmospheric conditions controls the value of ambient temperature. During field measurement, these conditions may not remain constant throughout the PDC recording process. Variation in ambient temperature disturbs the thermal equilibrium that the equipment may have attained at the start of the measurement procedure. Such a condition invariably affects the recorded dielectric response data. However, methods that are available for analyzing relaxation current assume that temperature equilibrium is maintained throughout the measurement period. Results presented in this paper show that dielectric response data is indeed affected if the ambient temperature increases/decreases monotonically. A method is also proposed in this paper using which the effect of such temperature variation on the recorded relaxation current data can be eliminated. This also ensures correct interpretation of PDC data for condition assessment. Analysis presented shows that the value of the equilibrium temperature does not affect the performance of the proposed technique. The applicability of the proposed methodology is first tested on laboratory samples. Thereafter, it is applied to data collected from a real life power transformer. [ABSTRACT FROM AUTHOR]

Furfural content in oil is a valuable indicator of cellulose paper degradation and is widely utilized in aging assessment for power transformers. However, with the same aging degree of insulation paper, the actual furfural content in oil is influenced by temperature because furfural partitioning behavior in the oil-paper insulation system of power transformers changes with temperature. Thus, correction of the temperature effect on furfural partitioning is crucial for accurate assessment of the aging of power transformers. In this research, oil-paper samples with different furfural contents were prepared through an accelerated thermal aging test. A furfural equilibrium experiment was conducted at different temperatures to construct a furfural partitioning diagram. The mass fraction of furfural in oil and paper was calculated. Results showed that the mass fraction of furfural in oil increases with temperature rising and aging deepening, which means that furfural tends to migrate from paper to oil at high temperatures and deep aging conditions. The change in furfural partitioning between oil and paper at different temperatures causes a deviation in paper aging assessment. To correct the temperature effect on furfural partitioning, a furfural correction factor was developed to normalize furfural contents in oil at different temperatures to a reference temperature. The furfural correction factor was verified by experimental data and then introduced into the relation between degree of polymerization of paper and furfural content of oil. Verification results showed that the corrected equation can enhance the accuracy of paper aging estimation at different temperatures. The findings of this work indicated temperature effect on furfural partitioning should be considered when determining the furfural thresholds and evaluating the aging condition of power transformers. [ABSTRACT FROM PUBLISHER]

The converter transformer epoxy impregnated paper bushing is a multi-media electrical equipment, and the main materials include the internal conductor, the external conductor, transformer oil, SF6 gas, the air inside internal conductor, the main insulation material epoxy impregnated paper, sheath, and fittings. In actual operating, the converter transformer bushing is undertaken by the harmonic current with large number of high harmonics and the temperature distribution of the epoxy impregnated paper converter transformer bushings under actual current waveform needs to be researched. What's more, the temperature distribution of the epoxy impregnated paper converter transformer bushings is affected by several factors and to provide basis for the optimization of bushings it's necessary to research about the impact of these factors on the temperature distribution of the epoxy impregnated paper converter transformer bushings. In this paper, on the basis of our previous paper [8], the 3-D temperature distribution of the 400 kV epoxy impregnated paper converter transformer bushing under actual current waveform with large number of harmonics has been simulated by using the computational fluid dynamics (CFD) and finite element method (FEM) analysis. The temperature distribution regularity of the 400 kV converter transformer bushing under different influencing factors has been computed and analyzed. The dissipation structure of the bushing has been optimized and the DC steady-state electric field distribution of the 400 kV converter transformer bushing has been obtained considering the temperature gradient in epoxy impregnated paper. [ABSTRACT FROM PUBLISHER]