Search

The random vector functional link (RVFL) network is suitable for solving nonlinear problems from transformer fault symptoms and different fault types due to its simple structure and strong generalization ability. However, the RVFL network has a disadvantage in that the network structure, and parameters are basically determined by experiences. In this paper, we proposed a method to improve the RVFL neural network algorithm by introducing the concept of hidden node sensitivity, classify each hidden layer node, and remove nodes with low sensitivity. The simplified network structure could avoid interfering nodes and improve the global search capability. The five characteristic gases produced by transformer faults are divided into two groups. A fault diagnosis model of three layers with four classifiers was built. We also investigated the effects of the number of hidden nodes and scale factors on RVFL network learning ability. Simulation results show that the number of implicit layer nodes has a large impact on the network model when the number of input dimensions is small. The network requires a higher number of implicit layer neurons and a smaller threshold range. The size of the scale factor has significant influence on the network model with larger input dimension. This paper describes the theoretical basis for parameter selection in RVFL neural networks. The theoretical basis for the selection of the number of hidden nodes, and the scale factor is derived. The importance of parameter selection for the improvement of diagnostic accuracy is verified through simulation experiments in transformer fault diagnosis.

With the continuous popularization and development of highway traffic in mountainous areas, the number of rock slopes is also increasing. In order to improve the stability of rock slope and reduce the harm caused by slope slip, this paper carries out numerical simulation of rock slope sliding based on particle swarm optimization algorithm. Firstly, this paper combines the differential evolution algorithm and simplex method to improve the global and local search ability of particle swarm optimization (PSO) algorithm and analyzes the performance of the algorithm. ABAQUS software is used to simulate rock slope sliding, the finite element method is used to analyze the stability of rock slope, and LS-DYNA program is used to simulate rockfall impact rock slope. During the numerical simulation, the improved algorithm is used to analyze all the data. Experimental data show that the improved PSO algorithm converges after nearly 100 iterations and the convergence speed and optimization accuracy are high. In the numerical simulation, the average failure probability of the left and right sides of the main section at the top, middle, and foot of the slope is 0.0820 and 0.0723, 0.0772 and 0.0492, and 0.0837 and 0.0677, respectively, indicating that the overall instability probability of the left side of the rock slope is higher than that of the right side. The rock slope with the same direction through joint is mainly affected by the joint at the toe of the slope, the rock slope with reverse through joint is mainly affected by the joint in the slope, and the sliding occurs from the middle to both ends. In addition, with the increase of the size and height of rockfall, the total energy of rock slope is also increasing, and the possibility and degree of rock slope sliding are higher. This shows that the improved particle swarm optimization algorithm can effectively analyze some factors affecting slope slip in numerical simulation of saturated rock slope slip.

In this paper, generalized versions of Hadamard and Fejér–Hadamard type fractional integral inequalities are obtained. By using generalized fractional integrals containing Mittag-Leffler functions, some well-known results for convex and harmonically convex functions are generalized. The results of this paper are connected with various published fractional integral inequalities.

This paper aims to investigate the speed regulation problem for permanent magnet synchronous motor (PMSM) servo systems subject to unknown load torque disturbances. The proposed method utilizes sliding mode control (SMC), invariant manifold theory, and disturbance observation technique. In the PMSM servo systems, the unknown load torques will affect the control performance to a large extent, which is unmatched. In addition, compared with full-state measurement, the output-feedback framework is easy to implement and reduces the sensor costs. However, it is difficult to handle unmatched disturbance and unmeasured states simultaneously. To this end, this paper specifically combines the sliding mode control theory with the invariant manifold theory and puts forward an output-feedback disturbance rejection control method. The key idea is that the unmatched disturbance in the PMSM servo systems is transformed into matched one by taking advantage of the invariant manifold, which is different from existing results. The transformation maintains most of dynamics of the PMSM system for control design, which improves the accuracy. In addition, an extended state observer is designed to estimate the current and lumped disturbance simultaneously; then, the output-feedback SMC method is proposed by introducing the estimations. Besides, the switching gain in the proposed sliding mode controller can change with estimation errors adaptively, and the chattering reduces. Simulation results on a PMSM system validate the effectiveness of the proposed control strategy.

This paper proposes a signal timing scheme through a two-stage fuzzy logic controller. The controller first determines the signal phase and then adjusts the green time. At the first stage, the adaptive membership function of vehicle arrival rate is improved to adapt to the changing traffic flow. In addition to arrival rate and queue vehicles, a specific phase order rule is considered to avoid disordered phase selection in fuzzy control. At the second stage, the green time detection module decides whether to extend the current green time or switch phases every few seconds and the vehicle arrival rate is not required as the input to controller in real-time detection. Differential evolution algorithm with low space complexity and fast convergence is applied to optimize the fuzzy rules for avoiding artificial uncertainty. Simulation experiments are designed to compare traditional fuzzy controller, fixed-time controller, and fuzzy controller without flow prediction. Results show that the current proposed method in this paper can reduce vehicle delay significantly.

The rapid development of artificial intelligence technology makes it widely used in various fields. In order to more scientifically assist teenagers in physical training, this paper develops a set of teenagers’ physical training system based on artificial intelligence technology. Firstly, the experimental platform is built, and the sensor nodes are connected with the test host through the serial port to collect data to the experimental platform. The system consists of target detection module, data analysis module, and human posture estimation module. The background modeling method based on vibe model is used to form the target detection module, and the canny edge detection algorithm is used to form the data analysis module. Finally, the posture auxiliary index is established to estimate the human posture. This paper makes a systematic application test on a youth sports team. The experimental group was trained with artificial intelligence-based physical training system, while the control group was trained with traditional training methods. Before the experiment, the physical fitness of the two groups of subjects were evaluated, including standing long jump, 50 meters sprint, 30 s single swing rope skipping, pull-up, and squat 1RM. After 3 and 6 weeks of training, the physical fitness was evaluated again. The experimental results show that the intelligent assistant system established in this paper can accurately show that the physiological load of the athlete is in line with the law of physiological function change. After six weeks of training, the standing long jump of the experimental group has been improved by 20.97 cm, the 50 meters dash has been accelerated by 1.21 s, the 30 second single swing rope has been increased by 13.76, the pull-up has been increased by 1.41, and the squat 1RM has been increased by 15.16. This shows that the auxiliary training system based on artificial intelligence can help young athletes improve their physical quality and enhance their sports skills.

The results of this paper provide two Hadamard-type inequalities for strongly s , m -convex functions via Riemann–Liouville fractional integrals and error estimations of well-known fractional Hadamard inequalities. Their special cases are given and connected with the results of some published papers.

This paper focuses on the problem of cooperative game with payoff of vague value and its nucleolus. Firstly, the paper defines the score function and accuracy function of vague sets and the method for ranking of vague sets and proposes the concept of core and nucleolus of vague payoff cooperative game. Based on this, the model of vague payoff cooperative game is built. Then, the relationship between the core and the nucleolus of vague payoff cooperative game is further discussed, and the existence and unique characteristics of the nucleolus are proved. We use the ranking method defined in the paper to transform the problem of finding the nucleolus solution into a nonlinear programming problem. Finally, the paper verifies the feasibility and effectiveness of the method for finding the nucleolus with an experimental analysis.

The Internet is a popular form of information technology development in the new century, and it organizes and analyzes big data by taking effective measures to find useful information. With manpower, it is obviously not enough to be in such a huge information system, so the emergence of sustainable computing and artificial intelligence has become the core of large-scale data processing at this stage. This paper studies the application of the combined algorithm based on sustainable computing and artificial intelligence. In this paper, a new combined intelligent search algorithm is proposed by combining sustainable computing with artificial intelligence. The combination algorithm firstly analyzes the value from the aspects of ecological environment and economic benefits and studies the overall evaluation of sustainable development ability. Secondly, the energy analysis method is used to establish a reasonable comprehensive ecosystem and evaluate its impact on the sustainable development of environment and economy. Finally, the impact of resource consumption, wind speed detection, waste discharge, and utilization of renewable resources in a certain area is analyzed by simulation. Through the experimental results, on the one hand, it is proved that the data obtained by the combined algorithm are more accurate than the single algorithm; on the other hand, the combined algorithm can be further sublimated and widely used for other data detection. The combination algorithm proposed in this paper can effectively detect the required data and has high applicability.

As the scale of China’s outward foreign direct investment (OFDI) continues to expand, more and more scholars have begun to discuss the influence of OFDI on enterprise technological innovation. In order to be able to deeply explore the impact of enterprises’ OFDI activities on enterprise technological innovation, this paper combines relevant enterprise data from 2015 to 2017 and uses the new method to test the “technological innovation effect” produced by the OFDI of Chinese enterprises. Finally, this paper concluded that the development of OFDI activities of enterprises can promote the improvement of the level of technological innovation of enterprises, and this promotion has a lag effect. R&D-type OFDI activities play a vital role in promoting the ability of technological innovation of enterprises. Compared with low-income host countries, investment in high-income host countries has a greater effect on promoting the ability of technological innovation of enterprises.

As an essential data processing technology, cluster analysis has been widely used in various fields. In clustering, it is necessary to select appropriate measures to evaluate the similarity in the data. In this paper, firstly, a cluster center selection method based on the grey relational degree is proposed to solve the problem of sensitivity in initial cluster center selection. Secondly, combining the advantages of Euclidean distance, DTW distance, and SPDTW distance, a weighted distance measurement based on three kinds of reach is proposed. Then, it is applied to Fuzzy C-MeDOIDS and Fuzzy C-means hybrid clustering technology. Numerical experiments are carried out with the UCI datasets. The experimental results show that the accuracy of the clustering results is significantly improved by using the clustering method proposed in this paper. Besides, the method proposed in this paper is applied to the MUSIC INTO EMOTIONS and YEAST datasets. The clustering results show that the algorithm proposed in this paper can also achieve a better clustering effect when dealing with practical problems.

With the rapid development of mechatronics and robotics technology, the application of robots has been extended from the industrial field to daily life and has become an indispensable part of work and daily life. The accuracy and flexibility of the operator determine the operating efficiency of the robot. Although the level of development of the operator is constantly improving, the traditional operator has a simple structure and generally adopts parallel movement or tightening. The holding structure has poor flexibility and stability, making it difficult to achieve precise position capture and control and cannot meet the requirements of delicate tasks. In this paper, a basic force analysis of the manipulator is carried out, and the change trend of the force and driving force of each joint when the manipulator is grasping objects is obtained, so as to determine that the manipulator can grasp the object stably; then, in the strength analysis of the manipulator, it is determined that the material meets the strength requirements. This paper conducts an output voltage experiment on the static performance and coupling error of the mechanical arm wrist force sensor. Secondly, in order to study the influence of the temperature change in the space environment on the zero-point output of the mechanical arm sensor, a high and low temperature test box are used to simulate the temperature brought by the temperature change to the sensor. Experiments show that the maximum coupling error of the sensor is 1.81%, which is less than 2% of the design index. This indicates that the operator sensor is used to detect the force and torque that the space operator’s edge operator experiences when it interacts with the external environment and provides the necessary power sensing information for power control and compatible operator motion control, completing some complex; the Fine project is an important prerequisite for realizing the intelligence of space operators.

The service information system is constantly transforming to a networked information model, and domestic hardware equipment is constantly updated. Independent controllability has also become the basic requirement of the new information age. With the development of the information age and the new era of independent control, more and more services and applications will also be deployed on autonomous and controllable cloud platforms. With the rapid development of Internet technology in the information age and the resulting changes in productivity, people can record, store, and transmit more and more information. When information becomes recordable, storage, and easy to transmit, information becomes modern meaning nowadays, an era of information explosion characterized by massive, volatile, timely transmission, and diverse forms has truly come, forming what is now called the “big data era”. This article mainly introduces the analysis of sports big data based on the cloud platform and the research on the impact on the sports economy and intends to provide ideas and directions for the analysis of sports big data and the research on the impact on the sports economy. This paper proposes a cloud platform-based sports big data analysis and research methods for its impact on the sports economy, including the use of Hadoop cloud platform big data processing systems and support vector regression algorithms for cloud platform-based sports big data analysis and sports economy. The experimental results of this paper show that the average correlation between sports big data analysis and sports economic development is 0.5155, and appropriate cloud platform-based sports big data analysis plays a positive role in promoting sports economic development.

With the advent of the era of big data, data mining has become one of the key technologies in the field of research and business. In order to improve the efficiency of data mining, this paper studies data mining based on the intelligent recommendation system. Firstly, this paper makes mathematical modeling of the intelligent recommendation system based on association rules. After analyzing the requirements of the intelligent recommendation system, Java 2 Platform, Enterprise Edition, technology is used to divide the system architecture into the presentation layer, business logic layer, and data layer. Recommendation module is divided into three substages: data representation, model learning, and recommendation engine. Then, the fuzzy clustering algorithm is used to optimize the system. After the system is built, the performance of the system is evaluated, and the evaluation indexes include accuracy, coverage, and response time. Finally, the system is put into a trial operation of an e-commerce platform. The click-through rate and purchase conversion rate of recommended products before and after the operation are compared, and a questionnaire survey is randomly launched to the platform users to analyze the user satisfaction. The experimental data show that the MAE of this system is the lowest, maintained at about 0.73, and its accuracy is the highest; before the recommended threshold exceeds 0.5, the average coverage rate of this system is the highest: 0.75; in Q1–Q5 subsets, the shortest response time of the system is 0.2 s. Before and after the operation of the system, the average click-through rate increased by 11.04%, and the average purchase rate increased by 9.35%. Among the 1216 users, 43% of the users were satisfied with 4 and 9% with 1. This shows that the system algorithm convergence speed is fast; it can recommend products more in line with user needs and interests and promote higher click-through rate and purchase rate, but user satisfaction can be further improved.

The climate of Sri Lanka has been fluctuating at an alarming rate during the recent past. These changes are reported to have pronounced impacts on the livelihoods of the people in the country. Water is central to the sustainable functioning of ecosystems and wellbeing of mankind. It is evident that pronounced variations in the climate will negatively impact the availability and the quality of water resources. The ecosystem-based adaptation (EbA) approach has proved to be an effective strategy to address the impact of climate change on water resources in many parts of the world. The key aim of this paper is to elaborate the wide range of benefits received through implementation of EbAs in field level, watershed scale, and urban and coastal environments in the context of Sri Lanka. In addition, this paper discusses the benefits of utilizing EbA solutions over grey infrastructure-based solutions to address the issues related to water management. The wide range of benefits received through implementation of EbAs can be broadly classified into three categories: water supply regulation, water quality regulation, and moderation of extreme events. This paper recommends the utilization of EbAs over grey infrastructure-based solutions in adaptation to climate change in the water management sector for the developing region due its cost effectiveness, ecofriendliness, and multiple benefits received on long-term scales. The findings of this study will unequivocally contribute to filling existing knowledge and research gaps in the context of EbAs to future climate change in Sri Lanka. The suggestions and opinions of this study can be taken into account by decision makers and water resources planning agencies for future planning of actions related to climate change adaptation in Sri Lanka.

Embedded software is increasingly being used with high reliability. However, the fault localization of embedded software is still largely dependent on the experience of engineers. Besides, faults in embedded software programs are not independent individuals; they are related to each other and affect each other, which may lead to more complex interaction behavior. These uncertainties render the traditional methods for single-fault localization with limited practical value. This paper has proposed a multiple-fault localization method to be applied to the embedded software, with emphasis on the cache-based program spectra-acquiring method and the hybrid clustering-based fault partition method. Through case studies on 108 groups of the subject program, it has been proved that the hybrid clustering-based fault partition method has significantly improved the effectiveness of multiple-fault localization in comparison with the traditional fault localization methods. Experiments on three embedded software programs in engineering have revealed that the cache-based program spectra-acquiring method saves nearly half of the running-time cost compared with the traditional spectrum-acquiring method based on real-time transmission. Therefore, the multiple-fault localization method proposed in this paper can be applied in embedded software debugging and testing in engineering.

With the rapid development of network technology and entertainment creation, the types of movies have become more and more diverse, which makes users wonder how to choose the type of movies. In order to improve the selection efficiency, recommend Algorithm came into being. Deep learning is a research field that has received extensive attention from scholars in recent years. Due to the characteristics of its deep architecture, deep learning models can learn more complex structures. Therefore, deep learning algorithms in speech recognition, machine translation, image recognition, and other fields have achieved impressive results. This article mainly introduces the research of personalized movie recommendation methods based on deep learning and intends to provide ideas and directions for the research of personalized movie recommendation under deep learning. This paper proposes a research method of personalized movie recommendation methods based on deep learning, including an overview of personalized recommendation and collaborative filtering recommendation algorithms, which are used to conduct research experiments on personalized movie recommendation methods based on deep learning. The experimental results in this paper show that the accuracy of the training set of the Seq2Seq model based on the LSTM recurrent neural network reaches 96.27% and the accuracy of the test set reaches 95.89%, which can be better for personalized movie recommendation.

With the continuous development of society and the rapid development of science and technology, virtual reality technology is also developing rapidly. It has been widely used in all walks of life and is playing an irreplaceable role. Modern education has also begun to integrate with science. Sports are also constantly deepening the application of information technology. In order to make students have a new understanding of college physical education and sports training and improve the technical level and training quality of college sports athletes, this paper studies the application of virtual reality technology in physical education and sports training. In this paper, the semisupervised framework is used to implement motion input and interactive virtual scene algorithms. First, based on Q statistics, virtual simulation and differential selection algorithms are used to select athletic students with strong autonomous learning ability and then use the classifier’s neighbor confidence. The formula selects the student with the highest learning level and marks it. Experimental results show that this method can effectively assist physical education activities and improve students’ learning efficiency. Students’ efficiency in sports has increased by 30%. At the same time, 2/3 of people believe that their interest in sports training has increased 80% and another 90% of college coaches believe that the use of virtual reality technology in physical education is very necessary, which can improve the technical level and training quality of college sports athletes and contribute to the reserve of Chinese competitive sports talents.

The virtual reality visual display system creates a realistic virtual product display system, allowing users to swim in a three-dimensional virtual environment and perform interactive operations, fully simulating the process of shopping selection and payment in reality, so that users have an immersive feeling. The purpose of this article is to realize the design of an immersive 5G virtual reality visual display system through big-data digital city technology. This paper uses big-data digital city technology to design and implement an immersive virtual reality visualization system from the three-dimensional display mode of vision, hearing, and touch, creating a real and interactive three-dimensional visualization environment for users to have a more intuitive visual experience. The experimental results of this paper show that the smoothness of the virtual reality visualization system test can reach 60FPS, the excellent rate reaches nearly 33%, and the model scene-realistic feedback excellent rate is about 62.5%.

Based on the basic theory of the material point method (MPM), the factors affecting the computational efficiency are analyzed and discussed, and the problem of improving calculation efficiency is studied. This paper introduces a mirror reflection boundary condition to the MPM to solve axisymmetric problems; to improve the computational efficiency of solving large deformation problems, the concept of "dynamic background domain (DBD)" is also proposed in this paper. Taking the explosion and/or shock problems as an example, the numerical simulation are calculated, and the typical characteristic parameters and the CPU time are compared. The results show that the processing method introducing mirror reflection boundary condition and MPM with DBD can improve the calculation efficiency of the corresponding problems, which, under the premise of ensuring its calculation accuracy, provide useful reference for further promoting the engineering application of this method.

The main objective of this paper is to present a new clustering algorithm for metadata trees based on K-prototypes algorithm, GSO (glowworm swarm optimization) algorithm, and maximal frequent path (MFP). Metadata tree clustering includes computing the feature vector of the metadata tree and the feature vector clustering. Therefore, traditional data clustering methods are not suitable directly for metadata trees. As the main method to calculate eigenvectors, the MFP method also faces the difficulties of high computational complexity and loss of key information. Generally, the K-prototypes algorithm is suitable for clustering of mixed-attribute data such as feature vectors, but the K-prototypes algorithm is sensitive to the initial clustering center. Compared with other swarm intelligence algorithms, the GSO algorithm has more efficient global search advantages, which are suitable for solving multimodal problems and also useful to optimize the K-prototypes algorithm. To address the clustering of metadata tree structures in terms of clustering accuracy and high data dimension, this paper combines the GSO algorithm, K-prototypes algorithm, and MFP together to study and design a new metadata structure clustering method. Firstly, MFP is used to describe metadata tree features, and the key parameter of categorical data is introduced into the feature vector of MFP to improve the accuracy of the feature vector to describe the metadata tree; secondly, GSO is combined with K-prototypes to design GSOKP for clustering the feature vector that contains numeric data and categorical data so as to improve the clustering accuracy; finally, tests are conducted with a set of metadata trees. The experimental results show that the designed metadata tree clustering method GSOKP-FP has certain advantages in respect to clustering accuracy and time complexity.

Based on the consideration of the time effect and connecting with typical instances, the modified Caputo fractional time-varying damage model is proposed in this paper. The parameters of creep constitutive model of slope are determined by using the powerful mathematical software and the influence of the parameters of time varying viscus element and damage element, α and ξ , on strain are shown. As α increases, the strain rates of the first and second stages of creep attenuation and steady-state stages gradually decrease and the strain rate in the acceleration stage is reflected in ξ . The fitting curve is in good agreement with the experimental data, which proves that the damage model proposed in this paper is reasonable and accurate. It provides useful reference and guidance for further study of slope creep failure and practical applications.

Connectivity is a key theory in fuzzy incidence graphs FIGs . In this paper, we introduced connectivity index CI , average connectivity index ACI , and Wiener index WI of FIGs . Three types of nodes including fuzzy incidence connectivity enhancing node FICEN , fuzzy incidence connectivity reducing node FICRN , and fuzzy incidence connectivity neutral node FICNN are also discussed in this paper. A correspondence between WI and CI of a FIG is also computed.

Reinsurance plays a role of a stabilizer of the insurance industry and can be an effective tool to reduce the risk for the insurer. This paper aims to provide the optimal reinsurance design associated with the stop-loss reinsurance under the criterion of value-at-risk (VaR) risk measure. In this paper, the probability levels in the VaRs used by the both reinsurance parties are assumed to be different and the optimality results of reinsurance are derived by minimizing linear combination of the VaRs of the cedent and the reinsurer. The optimal parameter values of the stop-loss reinsurance policy are formally derived under the expectation premium principle.

In this paper, we introduce a Halpern algorithm and a nonconvex combination algorithm to approximate a solution of the split common fixed problem of quasi- ϕ -nonexpansive mappings in Banach space. In our algorithms, the norm of linear bounded operator does not need to be known in advance. As the application, we solve a split equilibrium problem in Banach space. Finally, some numerical examples are given to illustrate the main results in this paper and compare the computed results with other ones in the literature. Our results extend and improve some recent ones in the literature.

Predicting landslide displacement is of great significance in geotechnical engineering. An iteration-based combined prediction method was proposed for predicting the landslide displacement in this paper. Firstly, the landslide displacement was predicted by 10 latest multivariable grey models, and then the final landslide displacement prediction value was obtained through an iteration-based combined strategy. Concurrently, the reliability of the quadratic programming-based combined prediction method (QPCPM) and the iteration-based combined prediction method (ICPM) was rigorously proved in this paper. In addition, the inapplicability conditions of the optimal weight-based combined prediction method (OWCPM) were pointed out. ICPM could be regarded as a simplified version of QPCPM. The Bazimen and Baishuihe landslides in the Three Gorges Reservoir area of China were used as numerical examples to elaborate the performance of ICPM. This paper also demonstrated the reliability of ICPM by considering the effects of rainfall and reservoir water level on landslide displacement. Overall, ICPM features in simple and easy calculation and has rosy engineering application prospects.

This paper concerns on two types of integral boundary value problems of a nonlinear fractional differential system, i . e ., nonlocal strip integral boundary value problems and coupled integral boundary value problems. With the aid of the monotone iterative method combined with the upper and lower solutions, the existence of extremal system of solutions for the above two types of differential systems is investigated. In addition, a new comparison theorem for fractional differential system is also established, which is crucial for the proof of the main theorem of this paper. At the end, an example explaining how our studies can be used is also given.

The main aim of this paper is to give refinement of bounds of fractional integral operators involving extended generalized Mittag-Leffler functions. A new definition, namely, strongly α , m -convex function is introduced to obtain improvements of bounds of fractional integral operators for convex, m -convex, and α , m -convex functions. The results of this paper will provide simultaneous generalizations as well as refinements of various published results.

At present, the design method of components is still a partial factor design method, and the partial factor value is related to the load value. Because the partial factor has a great influence on the safety of engineering structure, it has been adjusted many times in the process of organization of the code. In order to be basically equivalent to European and American reliability standards and to conform to China’s national conditions and national policies, the Unified standard for reliability design of building structures is revised (i.e., the partial factor of permanent action and variable action was adjusted). Although the concept of factor of safety is commonly used in structure design practice to cover all the unexpected risks, there are some disadvantages to its direct use in structural reliability analysis. For example, the eccentricity of compression members is random, which will lead to the change in resistance parameters of compression members, rather than the fixed value specified in the code. However, the random variation in eccentricity is not considered in the code. So, in this paper, the partial factors of eccentrically loaded members are studied by considering the statistical parameter information of members with random eccentricity. This paper studies the partial factors of different types of components in different ratios of live load effect to dead load effect, and some recommendations are proposed to obtain safer designs. Finally, Monte Carlo simulation method is used to analyze the reliability of the eccentric member. The research results show that the value of partial factors of structure proposed in this paper is reasonable.

Typhoons can have disastrous effects on power systems. They may lead to a large number of power outages for distribution network users. Therefore, this paper establishes a model to predict the power outage quantity of distribution network users under a typhoon disaster. Firstly, twenty-six explanatory variables (called global variables) covering meteorological factors, geographical factors, and power grid factors are considered as the input variables. On this basis, the correlation between each explanatory variable and response variable is analyzed. Secondly, we established a global variable model to predict the power outage quantity of distribution network users based on Random Forest (RF) algorithm. Then the importance of each explanatory variable is mined to extract the most important variables. To reduce the complexity of the model and ease the burden of data collection, eight variables are eventually selected as important variables. Afterward, we predict the power outage quantity of distribution network users again using the eight important variables. Thirdly, we compare the prediction accuracy of a model called the No-model that has been used before, Linear Regression (LR), Support Vector Regression (SVR), Decision Tree Regression (DTR), RF-global variable model, and RF-important variable model. Simulation results show that the RF-important variable model proposed in this paper has a better effect. Since fewer variables can save prediction time and make the model simplified, it is recommended to use the RF-important variable model.

Based on disturbance observer, this paper develops a nonsingular terminal sliding mode control method for uncertain chaotic gyroscope system. Firstly, fuzzy logic system (FLS) is used to estimate the unknown function; then disturbance observer (DOB) is constructed to estimate the mixed disturbance, which consists of the fuzzy estimation error, external disturbance, and dead-zone input error. Subsequently, by using a nonsingular terminal sliding mode function, the control method proposed in this paper can achieve the sliding mode variable approaching a small neighborhood of zero and reduce chattering phenomenon of the tracking error and controller. Finally, comparative simulation results confirm the effectiveness of the method proposed in this paper.

This paper studies the stator winding electromagnetic force behaviors before and after rotor inter-turn short circuit (RISC) in synchronous generator. Different from other studies, this paper not only studies the electromagnetic force characteristics, but also investigates the mechanical responses, the damage regularity, and the countermeasure of the stator winding. Firstly, formulas of electromagnetic force online and end part are obtained. Then, a 3D finite element model of a 3-pair-pole simulation generator is applied to get the electromagnetic force, and the dangerous stator slot is found. Finally, the mechanical response of each end winding is acquired, and especially the directional deformations of nose part are calculated. It shows that the occurrence of RISC will bring in times of rotor rotating frequency components to electromagnetic force, but the DC component and 2p times of rotor rotating frequency components are still the main that will be decreased. Additionally, the winding insulation wear in the same layer is more serious than that in a different layer, nose fatigue fracture begins with the center, and nose insulation wear starts from the top.

During the long-term operating period, the mechanical parameters of hydraulic structures and foundation deteriorated gradually because of the environmental factors. In order to evaluate the overall safety and durability, these parameters should be calculated by some accurate analysis methods, which are hindered by slow computational efficiency and optimization performance. The improved deep Q-network (DQN) algorithm combined with the deep neural network (DNN) surrogate model was proposed in this paper to ameliorate the above problems. Through the study cases of different zoning in the dam body and the actual engineering foundation, it is shown that the improved DQN algorithm has a good application effect on inversion analysis of material mechanical parameters in this paper.

Based on fuzzy logic systems and prescribed performance technology, this paper investigated the stable tracking problem of a class of nonlinear systems with unknown dead-zone inputs. Firstly, the original system is transformed into an equivalent system. Then, a Nussbaum-type function is added in the predefined performance controller to estimate the unknown control direction, and the boundedness of all signals in the closed-loop system is guaranteed. In addition, tracking errors will always remain within the prescribed performance boundaries. Finally, a comparative simulation example shows the effectiveness of the method proposed in this paper.

In this paper, a disturbance observer-based complementary fractional-order sliding mode control (CFOSMC) scheme is proposed for the permanent magnet synchronous motor (PMSM) drive system. First, to reconstruct the load disturbance and parameter variations, a nonlinear disturbance observer is designed. Next, a disturbance observer-based fractional-order sliding mode with a saturation function control law is designed to reduce the chattering problem in the existing fractional-order sliding mode control (FOSMC) method. Furthermore, to reduce the thickness of the boundary layer, a CFOSMC scheme is designed. By using the fractional-order Lyapunov stability theorem, the existence condition and the chattering problem are analyzed. Compared with the existing FOSMC, the obtained CFOSMC law does not contain any high-order derivatives of tracking error, which is easier to implement. Finally, the numerical simulations and experimental results are provided to show the superiority of the proposed method. To improve the performance of the permanent magnet synchronous motor (PMSM) drive system in terms of tracking rapidity, accuracy, and robustness, a complementary fractional-order sliding mode control (CFOSMC) scheme with disturbance observer is proposed in this paper.

In today's global competition environment with rapid changes in market and technology, it is more and more difficult for enterprises to fully grasp the latest knowledge and learn all the technologies by relying on their own strength. It is particularly important for enterprises to establish a network relationship of a certain intensity with other external entities (upstream and downstream enterprises, peer enterprises, scientific research institutions, government departments, financial institutions, and other organizations) for their technological learning and improvement of technological innovation performance. From different perspectives, the academic circles have confirmed that the strength of network relationship does have an impact on the technological innovation performance of enterprises. This paper will explore the measurement scale of technology learning cost, and from the basic perspective of technology learning cost, deeply explore and analyze how enterprise technology innovation performance is affected by the strength of enterprise network relationship. This paper argues that the strength of network relationship can affect the cost of technology learning and therefore the performance of technology innovation. The main contents of this study include the following. (1) Through the collation and review of the related theories of network relationship strength, technological learning cost and technological innovation performance, and the existing research results, the theoretical model of this study is established, and the theoretical assumptions of this study are put forward. (2) A presurvey is carried out first, and the data collected from the presurvey are used to test the reliability and validity of the scale of this study, and the appropriate measurement scales for the strength of network relationship, technology learning cost, and technology innovation performance are determined. (3) Adopt the method of regression analysis combined with the SME method, to verify this paper builds the theoretical model, and further clarify the network relation intensity, technology acquisition cost, and cost of technological learning all dimensions and performance of technological innovation and network strength, technological learning mechanism between cost, and performance of technological innovation.

In the current vehicle-bridge dynamics research studies, displacement impact coefficients are often used to replace the moment and shear force impact coefficients, and the vehicle model is also simplified as a moving-load model without considering the contribution of vehicle stiffness and damping to the system in some concerned research studies, which cannot really reflect the mechanical behavior of the structures under vehicle dynamic loads. This paper presents a vehicle-bridge coupling model for the prediction of dynamic responses and impact coefficient of the long-span curved bending beam bridge. The element stiffness matrix and mass matrix of a curved box girder bridge with 9 freedom degrees are directly deduced based on the principle of virtual work and dynamic finite element theory. The vibration equations of vehicle-bridge coupling are established by introducing vehicle mode with 7 freedom degrees. The Newmark-β method is adopted to solve vibration response of the system under vehicle dynamic loads, and the influences of flatness of bridge surface, vehicle speed, load weight, and primary beam stiffness on the impact coefficient are comprehensively discussed. The results indicate that the impact coefficient presents a nonlinear increment as the flatness of bridge surface changes from good to terrible. The vehicle-bridge coupling system resonates when the vehicle speeds reach 60 km/h and 100 km/h. The moment design value will maximally increase by 2.89%, and the shear force design value will maximally decrease by 34.9% when replacing moment and shear force impact coefficients with the displacement impact coefficient for the section internal force design. The load weight has a little influence on the impact coefficient; the displacement and moment impact coefficients are decreased with an increase in primary beam stiffness, while the shear force impact coefficient is increased with an increase in primary beam stiffness. The theoretical results presented in this paper agree well with the ANSYS results.

The K-Nearest Neighbor (KNN) algorithm is a classical machine learning algorithm. Most KNN algorithms are based on a single metric and do not further distinguish between repeated values in the range of K values, which can lead to a reduced classification effect and thus affect the accuracy of fault diagnosis. In this paper, a hybrid metric-based KNN algorithm is proposed to calculate a composite metric containing distance and direction information between test samples, which improves the discriminability of the samples. In the experiments, the hybrid metric KNN (HM-KNN) algorithm proposed in this paper is compared and validated with a variety of KNN algorithms based on a single distance metric on six data sets, and an HM-KNN application method is given for the forward gait stability control of a bipedal robot, where the abnormal motion is considered as a fault, and the distribution of zero moment points when the abnormal motion is generated is compared. The experimental results show that the algorithm has good data differentiation and generalization ability for different data sets, and it is feasible to apply it to the walking stability control of bipedal robots based on deep neural network control.

Based on information asymmetry theory, principal-agent theory, and risk management theory, this paper analyzes the mechanism of the impact of big data on financial decision-making, analyzing four dimensions: how big data enhances the information base for forecasting, how big data improves the relevance of decision-making, how big data builds new competitive advantages, and how big data promotes dynamic decision-making. Secondly, through the analysis of specific implementation cases of enterprise big data in financial decision-making, we focus on the real problems faced in management and the effect of solving problems through big data platform. The enterprise realizing the integration of business and finance not only can better lead business expansion, but also can improve the management level within the enterprise, which is conducive to the improvement of core competitiveness. The integration of industry and finance is essentially achieved through the application of various financial management modules to the business operations of enterprises, including budget management, capital management, fixed asset management, and financial accounting. If we want to implement the whole process of financial integration, it is impossible to achieve this manually, and we must first build a powerful information system as a guarantee. Under the guidance of theories of information asymmetry, stakeholders, and management information systems, Internet finance enterprises should build their own integrated business finance system based on the demand for business finance integration in the Internet finance industry, to enhance the matching of business finance data of Internet finance enterprises, improve the efficiency of enterprise management, and realize business finance integration. Finally, through the research of this paper, we hope to provide reference for other similar enterprises to apply big data for financial decision-making. Through the application of big data, higher economic benefits are achieved in procurement management, production control, capital budget, and investment decision compared with the previous ones. It is concluded that in the era of big data, massive data can be used to serve enterprise decision-making in depth, which can break the business and financial barriers, improve the efficiency and quality of decision-making, optimize the organizational structure and personnel, and enhance the prediction and early warning capability. The application of big data tools has become the key to assisting financial decision-making and enhancing enterprise value.

The relationship between financial system and economic development is not a simple linear relationship. In some cases, the development of finance may not improve the economic development level. This paper studies the influence of the financial system on the high-quality economic development, constructs the comprehensive index of the financial system by the factor analysis method, and calculates the green total factor productivity as the index of high-quality economic development by the CRS multiplier model. Empirically, this paper takes the panel data of 30 provinces, municipalities, and autonomous regions in China from 2005 to 2018 as samples, constructs the panel threshold model, and applies the financial system, economic development level, infrastructure, and industrial structure as threshold variables to study the nonlinear relationship between the financial system and high-quality economic development. The results demonstrate that the impact of the financial system on the high-quality economy presents an inverted U-shaped relationship when the financial system and industrial structure are the threshold variables, indicating that there is an optimal interval, that is, when the financial system threshold is between 0.1355 and 0.1377 and the industrial structure threshold is between 0.1364 and 0.1408, the financial system plays a greater role in the allocation of funds and has the most obvious positive impact on high-quality economic development. Meanwhile, the impact of the financial system on the high-quality shows a marginal decreasing trend when the economic development level and infrastructure are the threshold variables; when the economic development threshold is less than 0.1409 and the basic setting threshold is less than 0.1167, the financial system has the greatest effect on promoting high-quality economic development. Based on the research results, targeted policy suggestions are put forward.

The study of accounting profitability was initiated by the famous American scholars Ball and Brown in the 1960s. In recent years, with the continuous development of market economy, the continuous improvement of the accounting legal system and accounting standards for enterprises has promoted the research on accounting profit in capital market in China. Due to the restriction of some objective conditions, there are not many valuable research results on the relationship between accounting earnings and stock price changes, and the research methods suitable for the study of accounting earnings still need to be explored and summarized. The China Securities Regulatory Commission (CSRC) has required listed companies to publish quarterly financial and accounting reports since 2002, and the condition of using the regression analysis method to study the accounting profit of listed companies is available. In this context, this paper designs a vector autoregressive model to study the correlation between stock price and accounting profit. First, combining the literature and the research results of accounting profit at home and abroad, this paper expounds the statistical analysis of accounting profit. Then, this paper analyzes the accounting profitability of listed companies in China from static and dynamic perspectives. Finally, according to the accounting profit status and profitability statistical analysis of accounting information, accounting profit and growth relationship, and accounting profit information and the relationship between stock prices, this paper is concluded. Also, this paper shows how to improve the profitability of listed companies and how can investors effectively use the accounting earnings information of listed companies for stock investment and put forward corresponding policy suggestions.

Fuzzy mathematics has been used more and more extensively and deeply in various fields since its emergence, and it has been more and more recognized. However, there is less research on fuzzy mathematics in the field of economic management. This paper attempts to introduce fuzzy theories and methods into economic management. On the premise of introducing fuzzy decision-making theories and methods, several fuzzy theories and methods that are commonly used in economic management are given. The fuzzy correlation method of economic phenomena is proposed, and the method is used to study the correlation between economic phenomena. Besides, this paper also uses fuzzy methods to analyze the relationship between economic phenomena—fuzzy relevance, and uses fuzzy two-way decision-making methods to carry out economic management and decision-making so that the decision-making results are more reasonable, scientific, and operability. In addition, this paper rationally explains the phenomena and laws existing in economic activities from a fuzzy perspective and gives models for fuzzy inference, diagnosis, and production decision-making, which have important meaning and profound theoretical value and practical value.

Automated Guided Vehicle (AGV) indoor autonomous cargo handling and commodity transportation are inseparable from AGV autonomous navigation, and positioning and navigation in an unknown environment are the keys of AGV technology. In this paper, the extended Kalman filter algorithm is used to match the sensor observations with the existing features in the map to determine the accurate positioning of the AGV. This paper proposes an improved joint compatibility branch and bound (JCBB) method to divide the data and then randomly extract part of the data in the divided data set, thereby reducing the data association space; then, the JCBB algorithm is used to perform data association and finally merge the associated data. This method can solve the problem of the increased computational complexity of JCBB when the amount of data to be matched is large to achieve the effect of increasing the correlation speed and not reducing the accuracy rate, thereby ensuring the real-time positioning of the AGV.

With the rapid development of the Internet, various forms of network attack have emerged, so how to detect abnormal behavior effectively and to recognize their attack categories accurately have become an important research subject in the field of cyberspace security. Recently, many hot machine learning-based approaches are applied in the Intrusion Detection System (IDS) to construct a data-driven model. The methods are beneficial to reduce the time and cost of manual detection. However, the real-time network data contain an ocean of redundant terms and noises, and some existing intrusion detection technologies have lower accuracy and inadequate ability of feature extraction. In order to solve the above problems, this paper proposes an intrusion detection method based on the Decision Tree-Recursive Feature Elimination (DT-RFE) feature in ensemble learning. We firstly propose a data processing method by the Decision Tree-Based Recursive Elimination Algorithm to select features and to reduce the feature dimension. This method eliminates the redundant and uncorrelated data from the dataset to achieve better resource utilization and to reduce time complexity. In this paper, we use the Stacking ensemble learning algorithm by combining Decision Tree (DT) with Recursive Feature Elimination (RFE) methods. Finally, a series of comparison experiments by cross-validation on the KDD CUP 99 and NSL-KDD datasets indicate that the DT-RFE and Stacking-based approach can better improve the performance of the IDS, and the accuracy for all kinds of features is higher than 99%, except in the case of U2R accuracy, which is 98%.

Considering that the garbage classification is urgent, a 23-layer convolutional neural network (CNN) model is designed in this paper, with the emphasis on the real-time garbage classification, to solve the low accuracy of garbage classification and recycling and difficulty in manual recycling. Firstly, the depthwise separable convolution was used to reduce the Params of the model. Then, the attention mechanism was used to improve the accuracy of the garbage classification model. Finally, the model fine-tuning method was used to further improve the performance of the garbage classification model. Besides, we compared the model with classic image classification models including AlexNet, VGG16, and ResNet18 and lightweight classification models including MobileNetV2 and SuffleNetV2 and found that the model GAF_dense has a higher accuracy rate, fewer Params, and FLOPs. To further check the performance of the model, we tested the CIFAR-10 data set and found the accuracy rates of the model (GAF_dense) are 0.018 and 0.03 higher than ResNet18 and SufflenetV2, respectively. In the ImageNet data set, the accuracy rates of the model (GAF_dense) are 0.225 and 0.146 higher than Resnet18 and SufflenetV2, respectively. Therefore, the garbage classification model proposed in this paper is suitable for garbage classification and other classification tasks to protect the ecological environment, which can be applied to classification tasks such as environmental science, children’s education, and environmental protection.

In this paper, we base our research by dealing with a real-world problem in an enterprise. A RFM (recency, frequency, and monetary) model and K-means clustering algorithm are utilized to conduct customer segmentation and value analysis by using online sales data. Customers are classified into four groups based on their purchase behaviors. On this basis, different CRM (customer relationship management) strategies are brought forward to gain a high level of customer satisfaction. The effectiveness of our method proposed in this paper is supported by improvement results of some key performance indices such as the growth of active customers, total purchase volume, and the total consumption amount.

A simple and effective mechanical parts maintenance approach with lower cost is urgently needed by the cost-sensitive manufactures for traditional excavators (HE). This paper proposes maintenance strategy for hydraulic cylinders (HC) of HE with energy regeneration and recovery system (ERRS). Reliability analysis and FMEA of historical failure data are applied to make maintenance strategy. In this study, the failure data required for reliability analysis are collected from the manufacturers and users over two and a half years, Excel is used as statistical tool, Minitab is used for parameter estimation, and Kolmogorov–Smirnov test is used to reject or accept the hypothesis of the distribution model. The reliability parameters R(t), Rset, and R∗(t) are determined and parameter β∗ is the reference value for making countermeasures and maintenance policies properly for the failure modes of the new HC of HE with ERRS. The purpose of this paper is to make proper maintenance policies and to maintain a high availability level and fulfill the user’s needs for HC, which also paves the way for further reliability study about ERRS.

In this paper, we consider a class of fractional-order systems described by the Caputo derivative. The behaviors of the dynamics of this particular class of fractional-order systems will be proposed and experienced by a numerical scheme to obtain the phase portraits. Before that, we will provide the conditions under which the considered fractional-order system’s solution exists and is unique. The fractional-order impact will be analyzed, and the advantages of the fractional-order derivatives in modeling chaotic systems will be discussed. How the parameters of the model influence the considered fractional-order system will be studied using the Lyapunov exponents. The topological changes of the systems and the detection of the chaotic and hyperchaotic behaviors at the assumed initial conditions and the considered fractional-order systems will also be investigated using the Lyapunov exponents. The investigations related to the Lyapunov exponents in the context of the fractional-order derivative will be the main novelty of this paper. The stability analysis of the model’s equilibrium points has been focused in terms of the Matignon criterion.

Based on proxy resignature, the signature transformation between trust domains of different cryptographic systems is realized with the help of the cloud authentication center, so as to achieve cross-domain access between users and cloud service providers in heterogeneous environment. Hierarchical ID tree realizes the uniqueness of identity in communication, and the security of heterogeneous cross-domain identity authentication is enhanced by the two-factor authentication of “password + key” and temporary identity replacing real identity. The security of the scheme is proved under the CK model, which can anonymously trace entity identity, resist replay attacks, replacement attacks, and man-in-the-middle attacks, and the simulation experiment is carried out. By searching it in related fields, no paper on heterogeneous cross-domain identity authentication based on proxy resignature has been published yet. The results of this paper show that the proposed scheme has better computing performance and higher security.

Large-scale sports stadiums are an important part of China’s sports stadium system and an important material basis and prerequisite for China’s basic public sports service system. This paper aims to establish the evaluation index system by exploring the utilization of large stadiums and gymnasiums under the background of sustainable development and to provide important reference for the construction and utilization of stadiums and gymnasiums in the future. Using literature methods, quantitative statistics, analytic hierarchy process (AHP), and other methods, focusing on sustainable use, this study develops a postgame utilization evaluation system for large stadiums, considering the design, construction, operation, and management of the stadium. This paper identifies 5 first-level indicators, 13 second-level indicators, and 38 third-level indicators, which mainly included five aspects of comprehensive performance, service level, environmental performance, economic performance, and venue maintenance. The AHP method was used to determine the index weight coefficient, thus forming a sustainable use evaluation index system for the large stadiums. Finally, taking Bengbu Sports Center in Anhui province as an example, this paper makes an empirical analysis.