Search

International audience; Quantum well systems based on semiconductors with the wurtzite crystalline structure have found widespread applications in photonics and optoelectronic devices, such as light-emitting diodes, laser diodes, or single-photon emitters. In these structures, the radiative recombination processes can be affected by (i) the presence of strain and polarization-induced electric fields, (ii) quantum well thickness fluctuations and blurring of a well–barrier interface, and (iii) the presence of dislocations and native point defects (intentional and unintentional impurities). A separate investigation of these phenomena is not straightforward since they give rise to similar effects, such as a decrease of luminescence efficiency and decay rate, enhancement of the Stokes shift, and strong blueshift of the emission with increasing pump intensity. In this Perspective article, we review the usefulness of measurements of the quantum well luminescence as a function of the hydrostatic pressure for both scientific research and the development of light-emitting technologies. The results presented here show that high-pressure investigations combined with ab initio calculations can identify the nature of optical transitions and the main physical factors affecting the radiative efficiency in quantum well systems. Finally, we will discuss an outlook to the further possibilities to gain new knowledge about the nature of recombination processes in quantum wells using high-pressure spectroscopy.

A multiple-quantum-well structure consisting of 40 periods of AlN/GaN:Si was investigated using a transmission electron microscope equipped with energy-dispersive X-ray spectroscopy. The thicknesses of the AlN barriers and the GaN quantum wells were 4 nm and 6 nm, respectively. The QW layers were doped with Si to a concentration of 1.3 × 10 19 c m - 3 (0.012 % at). The procedure for quantifying such a doping level using AlN as a standard is presented. The EDS results (0.013 % at) are compared with secondary ion mass spectrometry measurements (0.05 % at).

An analysis of the main recombination modes in nitrides, based on new method of data treatment is proposed for the determination of the carrier recombination processes in optically excited matter measured by time-resolved photoluminescence (PL). The analysis includes basic recombination modes: nonradiative Shockley-Read-Hall (SRH), radiative and Auger recombination in relation to monomolecular, bi-molecular, and tri-molecular processes of optical relaxation. The method is based on the introduction of instantaneous PL decay rate r P L plotted as a function of the PL intensity or of the time. Such an approach provides deep insight into the time evolution of the recombination of the optically excited semiconductor systems and can be applied to the time evolution of a variety of optically excited systems. The demonstration of its strength is given by the application to III-nitride based systems, including nitride highly doped and semi-insulating thick layers, polar and non-polar multi-quantum wells (MQWs). At low temperatures (5 K), the mono- and bi-molecular processes determine the carrier relaxation, and the tri-molecular Auger recombination contribution is negligible. At room temperature the data indicate an important contribution of Auger processes. It is also shown that asymptotic (low excitation), one-exponential recombination rate has different character depending on the presence of the electric fields across the structure.

Studies of internal electric fields in GaN/AlxGa1-xN (3 nm/4 nm) multi-quantum-wells (MQWs) with x = 0.25, 0.5, and 1 are presented. The structures were grown by plasma-assisted molecular-beam epitaxy and characterized by x-ray diffraction, transmission electron microscopy, and secondary ion mass spectroscopy. Optical properties of these structures were investigated by ambient and high-pressure photoluminescence (PL) measurements. They were strongly affected by polarization-induced electric fields giving rise to a quantum confined Stark effect, depending on the composition of the AlGaN barrier. The optical emission energy redshifts by > 100 meV when the Al content in the barrier increases from x = 0.25 up to x = 1, while the pressure coefficients of the PL energy are significantly reduced in comparison with bulk GaN. The transition energies and their pressure dependencies are modelled for tetragonally strained structures with the same geometry using a full tensorial representation of the strain in the MQWs under external pressure. The same MQWs are also simulated using density functional theory calculations. Additionally, influence of blurring of well-barrier interface on transition energy has been modelled. A good agreement between experimental results and theoretical analysis indicates that nonlinear effects induced by the tetragonal strain due to the lattice mismatch between the substrates and the polar MQWs are responsible for a drastic decrease of the pressure coefficients of PL energy, and that these effects are well described by ab initio calculation procedures. Our results reflect the role of composition and geometry on the basic optical properties of nitride quantum wells.

This work presents epitaxial growth and optical spectroscopy of CdTe quantum dots (QDs) in (Cd,Zn,Mg)Te barriers placed on the top of (Cd,Zn,Mg)Te distributed Bragg reflector. The formed photonic mode in our half-cavity structure permits to enhance the local excitation intensity and extraction efficiency of the QD photoluminescence, while suppressing the reflectance within the spectral range covering the QD transitions. This allows to perform coherent, nonlinear, resonant spectroscopy of individual QDs. The coherence dynamics of a charged exciton is measured via four-wave mixing, with the estimated dephasing time $T_2=(210\,\pm\,40)$ ps. The same structure contains QDs doped with single Mn$^{2+}$ ions, as detected in photoluminescence spectra. Our work therefore paves the way toward investigating and controlling an exciton coherence coupled, via $s$,$p$-$d$ exchange interaction, with an individual spin of a magnetic dopant., 6 pages, 5 figures

Spontaneous and piezoelectric polarization in the nitrides is analyzed. The slab model was designed and proved to be appropriate to obtain the spontaneous polarization in AlN, GaN and InN. The spontaneous polarization and polarization related electric fields in AlN, GaN and InN were determined using DFT slab calculations. The procedure generates single value of spontaneous polarization in the nitrides. It was shown that Berry phase polarization may be applied to determination of spontaneous polarization by appropriate addition of polarization induced electric fields. The electric fields obtained from slab model are consistent with the Berry phase results of Bernardini et al. The obtained spontaneous polarization values are: 8.69*10-3 C/m2, 1.88*10-3 C/m2, and 1.96*10-3 C/m2 for AlN, GaN and InN respectively. The related Berry phase polarization values are 8.69*10-2 C/m2, 1.92*10-2 C/m2, and 2.86*10-2 C/m2, for these three compounds, respectively. The GaN/AlN multiquantum wells (MQWs) were simulated using ab intio calculations. The obtained electric fields are in good agreement with those derived from bulk polarization values. GaN/AlN MQWs structures, obtained by MBE growth were characterized by TEM and X-ray measurements. Time dependent photoluminescence measurements were used to determine optical transition energies in these structures. The PL obtained energies are in good agreement with ab initio data confirming overall agreement between theoretical and experimental data.

The results of comprehensive theoretical and experimental study of binary GaN/AlN multi-quantum well (MQW) systems oriented along polar c-direction of their wurtzite structure are presented. A series of structures with quantum wells and barriers of various thicknesses were grown by plasma-assisted molecular-beam epitaxy and characterized by x-ray diffraction and transmission electron microscopy. It was shown that in general the structures of good quality were obtained, with the defect density decreasing with increasing quantum well thickness. The optical transition energies in these structures were investigated comparing experimental measurements with ab initio calculations of the entire GaN/AlN MQW structure depending on the QW widths and strains, allowing for direct determination of the energies of optical transitions and the electric fields in wells/barriers by electric potential double averaging procedure. Photoluminescence (PL) measurements revealed that the emission efficiency as well as the shape o...