Search

Objective: To explore the neuromuscular control mechanism and quantifying the fatigue response during bench press exercise is important references to prescribe an appropriate exercise program. However, current literature struggles to provide a concrete conclusion on the changes of intermuscular EMG-EMG coupling between synergistic and antagonist muscles during the exercise. Thus, the current study was designed to reveal fatigue-related changes of intermuscular EMG-EMG coupling during bench press exercise. Methods: Thirty-one healthy male participants performed a bench press exercise on the Smith machine at 60% One Repetition Maximum (1RM) workload to exhaustion, while surface electromyographic signals (sEMG) were collected from triceps brachii (TB), biceps brachii (BB), anterior deltoid (AD), posterior deltoid (PD), and pectoralis major (PM). Surface EMG signals were divided into the first half and second half of the bench press exercise. Phase synchronization index (PSI) was calculated between sEMG of synergistic muscle pairs AD-TB, AD-PM and antagonist muscle pairs BB-TB, AD-PD. Results: EMG power of TB, AD, PD, PM muscles in alpha (8–12 Hz) frequency band and EMG power of each muscle in beta (15–35 Hz), and gamma (35–60 Hz) frequency bands were all increased during the second half of contraction compared with the first half of contraction. PSI of gamma frequency band was significantly decreased in BB-TB muscle pair while EMG-EMG coupling of AD-TB in gamma frequency band was significantly increased during the second half of contraction compared to the first half of contraction. Conclusions: The results indicated a decrease of interconnection between synchronized cortical neurons and the motoneuron pool of BB and TB, and an increase of interconnection between AD-TB muscles during fatiguing bench press exercise at 60% 1RM workload. The changes of intermuscular coupling may be related to the supraspinal modulations to compensate for the decrease of muscle force as well as a result of unbalanced changes of agonist and antagonist muscle contractility. [ABSTRACT FROM AUTHOR]

The aim of this multi-experiment paper was to explore the concept of the minimum effective training dose (METD) required to increase 1-repetition-maximum (1RM) strength in powerlifting (PL) athletes. The METD refers to the least amount of training required to elicit meaningful increases in 1RM strength. A series of five studies utilising mixed methods, were conducted using PL athletes & coaches of all levels in an attempt to better understand the METD for 1RM strength. The studies of this multi-experiment paper are: an interview study with elite PL athletes and highly experienced PL coaches (n = 28), an interview and survey study with PL coaches and PL athletes of all levels (n = 137), two training intervention studies with intermediate-advanced PL athletes (n = 25) and a survey study with competitive PL athletes of different levels (n = 57). PL athletes looking to train with a METD approach can do so by performing ~3–6 working sets of 1–5 repetitions each week, with these sets spread across 1–3 sessions per week per powerlift, using loads above 80% 1RM at a Rate of Perceived Exertion (RPE) of 7.5–9.5 for 6–12 weeks and expect to gain strength. PL athletes who wish to further minimize their time spent training can perform autoregulated single repetition sets at an RPE of 9–9.5 though they should expect that strength gains will be less likely to be meaningful. However, the addition of 2–3 back-off sets at ~80% of the single repetitions load, may produce greater gains over 6 weeks while following a 2-3-1 squat-bench press-deadlift weekly training frequency. When utilizing accessory exercises in the context of METD, PL athletes typically utilize 1–3 accessory exercises per powerlift, at an RPE in the range of 7–9 and utilize a repetition range of ~6–10 repetitions.

Objective: This meta-analysis aims to systematically evaluate the impact of blood flow restriction training (BFRT) on muscle activation and post-activation potentiation (PAP) in the upper limbs, to provide guidance for upper limb protocols aiming to enhance explosive strength and activation. Methods: PubMed, CNKI, Web of Science, and EBSCO databases were queried to identify randomized controlled trials (RCTs) investigating the effects of upper limb BFRT on muscle activation and PAP. Inclusion and exclusion criteria were applied using the Cochrane bias risk tool. Literature quality assessment and statistical analysis were conducted using Revman 5.4 and Stata 17.0 software. Sensitivity analysis and funnel plots were utilized to assess result stability and publication bias. Results: A total of 31 articles involving 484 participants were included in the analysis. Meta-analysis results showed that upper limb BFRT significantly increased muscle iEMG values [SMD = 0.89, 95%CI (0.21, 1.58), p = 0.01]. BFRT had a significant effect on upper limb explosive force [SMD = 0.73, 95%CI (0.41, 1.04), p < 0.00001]. Subgroup analysis based on literature heterogeneity (I² = 92%, 80%) showed that exhaustive BFRT significantly decreased upper limb iEMG [SMD = −0.67, 95%CI (−1.25, −0.09), p = 0.01], with exercise modes including maximum output power of bench press [SMD = 1.87, 95%CI (0.22, 3.53), p < 0.0001], exercise intensity of 40%–70% 1RM [SMD = 1.31, 95%CI (0.61, 2.01), p < 0.0001], and pressure intensity of ≥60% AOP [SMD = 0.83, 95%CI (0.43, 1.23), p < 0.0001] reaching maximum effects and statistical significance. Conclusion: Upper limb BFRT can induce muscle activation and PAP. BFRT with 40%–70% 1RM and ≥60% AOP in the upper limbs is more likely to promote PAP. [ABSTRACT FROM AUTHOR]

The study aimed to identify and explain the typical differences in low-intensity high-volume resistance training (LIHV-RT) performances for major muscle groups between rural versus urban young female students to establish the relevant set of quantitative and qualitative resistance training parameters. The study sample included 46 recreational active female students at the Transilvania University of Brasov, (mean ± SD age, 20 ± 1year; body mass, 60 ± 3 kg; height, 160 ± 4 cm) grouped urban vs. rural. The study used modified resistance exercise machines for the hamstring- and quadricep-group muscles, equipped with a dynamometer and sensors for identifying developed forces and accelerations. A number of 368 tests were performed, representing two attempts for each subject, for knee flexion and knee extension exercises, with two different loads. For the performance analysis some variables were considered: the maximum number of repetition until failure, maximum force developed, maximum acceleration, the duration of the set and the mean time per repetition. The maximum number of repetition to failure shows a significant higher value for rural than urban in case of knee flexion (d = 0.98 [0.32, 1.54] for load 1(L1) and d = 0.65 [0.03, 1.21] for load 2(L2)) and in case of knee extension (d = 1.89 [1.11, 2.48] for L1 and d = 1.67 [0.92, 2.25] for L2). The total duration of the sets shows a significant higher value for rural than urban in case of knee flexion (d = 0.84 [0.19,1.39] for L2) and in case of knee extension (d = 1.46 [0.74, 2.03] for L1 and d = 1.56 [0.98, 2.14] for L2). Additionally we found differences in the quality of the relevant repetitions execution and in the impulse developed during the LIHV- MNRF sets. The study's main finding was that there are differences in LIHV- RT performances knee flexion and knee extension antagonistic exercises, between rural and urban female students. We concluded that the obtained results allow teachers to understand the optimal design of RT programs for the different groups of participants, in order to adapt their teaching techniques so that their final objectives are achieved, insisting on particular aspects of the theoretical or practical contents. [ABSTRACT FROM AUTHOR]

Objective: To assess the effects of 8 weeks of unilateral (UNI), bilateral (BI), and combined unilateral + bilateral (UNI + BI) resistance training on bench press and squat strength in adolescent boxers. Methods: Using the Gym Aware linear accelerometer, free-weight squat and bench press strength exercises were evaluated after an 8-week training intervention. Thirty adolescent boxers were randomly assigned to three groups: UNI, height: 1.73 ± 0.08 m, weight: 55.42 ± 5.85 kg; UNI + BI, height: 1.7 ± 0.06 m, weight: 54.73 ± 5.33 kg; and BI, height: 1.74 ± 0.06 m, weight: 59.67 ± 8.39 kg. Each group followed their designated UNI/BI/UNI + BI compound resistance training protocols, and the effects of 8 weeks of single-sided and bilateral intervention training on the performance of free-weight squat and bench press exercises at 30%, 50%, and 80% of 1-repetition maximum (1RM) were evaluated. Results: Significant improvements were observed in the 30% 1RM, 50% 1RM, and 80% 1RM outcomes for both squat and bench press exercises before and after the interventions (p < 0.05, p < 0.01). In the intergroup comparison, GymAware measurements revealed that the UNI and UNI + BI groups exhibited superior peak power values for squat and bench press exercises at 30% 1RM compared to the BI group. Discussion: UNI and UNI + BI training led to significantly higher output power values in bench press and squat exercises at 30% 1RM compared to the BI training group. [ABSTRACT FROM AUTHOR]

This document is an editorial published in Frontiers in Neuroscience titled "Advances in the neuromusculoskeletal modeling of injuries, diseases, and clinical treatments." The editorial discusses the use of computer modeling and simulation to study the human neuromusculoskeletal system and its applications in injury prevention, pathology evaluation, treatment of movement impairments, and design of assistive devices. The editorial highlights several research contributions in the field, including studies on muscle fatigue, skeleton motion analysis, musculoskeletal postural control, personalized neuromusculoskeletal models, and musculoskeletal shoulder loads. Overall, the editorial emphasizes the diverse applications and advancements facilitated by neuromusculoskeletal modeling in various fields of research and clinical practice. [Extracted from the article]

The aim of this study was to analyze and compare the muscle activation and concomitant intermuscular coupling of antagonist muscles among bench presses with different instability degrees. Twenty-nine untrained male college students performed bench press exercises at an intensity of 60% 1 RM on three conditions: small unstable bench press with Smith machine (SBP), medium unstable bench press of free weight (FWBP), and large unstable bench press with increased instability by suspending the load with elastic bands (IIBP). One-way repeated measures analysis of variance was used to compare integrated EMG activity values of the biceps brachii (BB), posterior deltoid (PD), long head of the triceps brachii (TB), anterior deltoid (AD), upper portion of the pectoralis major (PM) muscles, and phase synchronization index (PSI) of BB-TB and PD-AD antagonist muscle pairs. A higher integrated EMG of BB muscle was found during bench press with a more unstable condition. IIBP showed a higher integrated EMG of prime movers (TB, AD, and PM) and stabilizing of BB than SBP and FWBP. PSI between muscle pairs of BB-TB in the gamma frequency band was higher in SBP than the other bench presses with unstable conditions, which may be related to the optimal "internal model" for antagonist muscles during bench press exercise. Therefore, IIBP training may be an effective accessory exercise to maintain a higher level of muscle activation across primary and stabilizing muscles with a lighter load for untrained men, while SBP may be a suitable bench press exercise for untrained participants who have not developed the neuromuscular adaptations necessary for correct stabilization of the elbow joint. [ABSTRACT FROM AUTHOR]

Background: Functional resistance training (FRT) has been proposed as a safe alternative to traditional resistance training (TRT) for developing neuromuscular adaptation capacity and improving muscular strength and competitive performance. This study sought to compare the effects of 6 weeks of FRT and TRT on upper and lower limb muscular endurance and performance variables in untrained young men. Methods: Twenty-nine untrained healthy young males aged 18-29 years were randomly given 6 weeks of FRT [40% of 1repetition maximum (RM), 4,5 sets of 20 repetitions, 3 times/week] or TRT (70% of 1RM, 4,5 sets of 12 repetitions, 3 times/week). All participants underwent numerous tests before and after the 6-week training, such as muscular endurance (reps of bench press and leg flexion) and physical performance tests (sprint performance, pull-ups, throwing ability, and jumping ability). Results: After the 6 weeks of training, the TRT and FRT groups showed an equally significant increase in muscular endurance (p < 0.01), while the throwing and jumping abilities, 30-m sprint, and pull-ups performances in both the groups (p < 0.01) also improved significantly. However, no differences were observed between the groups (p > 0.05). Conclusion: These findings indicate that both functional resistance training and traditional resistance training are effective training methods for improving the upper and lower limb muscular endurance and performance in untrained young men. [ABSTRACT FROM AUTHOR]

This study aimed to determine whether the intra-complex active recovery within the strengthpower potentiating complex will impact the upper-body post-activation performance enhancement effect and how the magnitude of this effect will change across the upperbody complex training session. Thirteen resistance-trained males [the age, bodymass, height, experience in resistance training, and one-repetition maximum (1RM) in bench press were 27 ± 4 years; 92.3 ± 15.4 kg; 182 ± 6 cm; 6.4 ± 2.4 years, and 118 ± 29 kg, respectively) participated in this study. Each participant completed a baseline bench press throw performance assessment at 30% 1RM. Next, five strength-power potentiating complexes consisting of a bench press at 80% 1RM were tested until the average barbell velocity decreased by 10% as a conditioning activity, and 6min later, a re-test of bench press throw was carried out. During one experimental session during the rest interval inside the complex, they performed swiss ball leg curls, while between the complexes, a plank exercise (PAP-A) was performed. During the second experimental session, participants performed no exercises within the strength-power potentiating complexes and between them (PAP). Under control conditions, participants ran the same protocol (as the PAP condition) without the conditioning activity (CTRL). Friedman's test showed significant differences in peak (test = 90.634; p < 0.0001; Kendall's W = 0.410) and average (test = 74.172; p < 0.0001; Kendall's W = 0.336) barbell velocities during bench press throw. Pairwise comparisons indicated that the peak and average barbell velocities significantly increased in the fourth set [p = 0.022, effect size (ES) = 0.76 and p = 0.013, ES = 0.69, respectively], and the average barbell velocity was also increased in the second set (p = 0.018, ES = 0.77) in comparison to the baseline value during the PAP-A condition. Moreover, the peak barbell velocity was increased in the second (p = 0.008, ES = 0.72) and third (p = 0.019, ES = 0.76) sets compared to the baseline value during the PAP condition. This study showed that body-weight lower-body exercise as an intracomplex active recovery did not impair the upper-body post-activation performance enhancement effect across the complex training session. [ABSTRACT FROM AUTHOR]

While force-velocity-power characteristics of resistance exercises, such as bench presses and squats, have been well documented, little attention has been paid to load, force, and power-velocity relationships in exercises engaging core muscles. Given that power produced during lifting tasks or trunk rotations plays an important role in most sport-specific and daily life activities, its measurement should represent an important part of the test battery in both athletes and the general population. The aim of this scoping review was 1) to map the literature related to testing methods assessing core muscle strength and stability in sport and rehabilitation, chiefly studies with particular focus on force-velocity-power characteristics of exercises involving the use of core muscles, 2) and to identify gaps in existing studies and suggest further research in this field. The literature search was conducted on Cochrane Library databases, Scopus, Web of Science, PubMed and MEDLINE, which was completed by SpringerLink, Google Scholar and Elsevier. The inclusion criteria were met in 37 articles. Results revealed that among a variety of studies investigating the core stability and core strength in sport and rehabilitation, only few of them analyzed force–velocity–power characteristics of exercises involving the use of core muscles. Most of them evaluated maximal isometric strength of the core and its endurance. However, there are some studies that assessed muscle power during lifting tasks at different loads performed either with free weights or using the Smith machine. Similarly, power and velocity were assessed during trunk rotations performed with different weights when standing or sitting. Nevertheless, there is still scant research investigating the power-velocity and force-velocity relationship during exercises engaging core muscles in able-bodied and para athletes with different demands on stability and strength of the core. Therefore, more research is needed to address this gap in the literature and aim research at assessing strength and power-related measures within cross-sectional and intervention studies. A better understanding of the power-force-velocity profiles during exercises with high demands on the core musculature has implications for designing sport training and rehabilitation programs for enhancement of athletes' performance and/or decrease their risk of back pain. [ABSTRACT FROM AUTHOR]

Before major athletic events, a taper is often prescribed to facilitate recovery and enhance performance. However, it is unknown which taper model is most effective for peaking maximal strength and positively augmenting skeletal muscle. Thus, the purpose of this study was to compare performance outcomes and skeletal muscle adaptations following a step vs. an exponential taper in strength athletes. Sixteen powerlifters (24.0 ± 4.0 years, 174.4 ± 8.2 cm, 89.8 ± 21.4 kg) participated in a 6-week training program aimed at peaking maximal strength on back squat [initial 1-repetition-maximum (1RM): 174.7 ± 33.4 kg], bench press (118.5 ± 29.9 kg), and deadlift (189.9 ± 41.2 kg). Powerlifters were matched based on relative maximal strength, and randomly assigned to either (a) 1-week overreach and 1-week step taper or (b) 1-week overreach and 3-week exponential taper. Athletes were tested pre- and post-training on measures of body composition, jumping performance, isometric squat, and 1RM. Whole muscle size was assessed at the proximal, middle, and distal vastus lateralis using ultrasonography and microbiopsies at the middle vastus lateralis site. Muscle samples (n = 15) were analyzed for fiber size, fiber type [myosin-heavy chain (MHC)-I, -IIA, -IIX, hybrid-I/IIA] using whole muscle immunohistochemistry and single fiber dot blots, gene expression, and microRNA abundance. There were significant main time effects for 1RM squat (p < 0.001), bench press (p < 0.001), and deadlift, (p = 0.024), powerlifting total (p < 0.001), Wilks Score (p < 0.001), squat jump peak-power scaled to body mass (p = 0.001), body mass (p = 0.005), fat mass (p = 0.002), and fat mass index (p = 0.002). There were significant main time effects for medial whole muscle cross-sectional area (mCSA) (p = 0.006) and averaged sites (p < 0.001). There was also a significant interaction for MHC-IIA fiber cross-sectional area (fCSA) (p = 0.014) with post hoc comparisons revealing increases following the step-taper only (p = 0.002). There were significant main time effects for single-fiber MHC-I% (p = 0.015) and MHC-IIA% (p = 0.033), as well as for MyoD (p = 0.002), MyoG (p = 0.037), and miR-499a (p = 0.033). Overall, increases in whole mCSA, fCSA, MHC-IIA fCSA, and MHC transitions appeared to favor the step taper group. An overreach followed by a step taper appears to produce a myocellular environment that enhances skeletal muscle adaptations, whereas an exponential taper may favor neuromuscular performance. [ABSTRACT FROM AUTHOR]

The auto-regulation method is a rising training strategy to improve strength and motor performance, and the Autoregulatory Progressive Resistance Exercise (APRE), Rating of Perceived Exertion program (RPE), and Velocity-Based Training (VBT) are the three common auto-regulation programs. However, whether the auto-regulation method is more effective than the traditional strength training (the fixed-loading method) in maximum strength training is still unclear. The present study searched the Pubmed, SPORTDiscus, Web of Science, Embase, EBSCO, Cochrane, CNKI, and CQVIP databases, and included eight related studies published between 2010 and 2020, with a total of 166 subjects including division 1 college players and athletes with at least 1-year training history, and interventions ranging from 5 to 10 weeks. A meta-analysis was performed to check the difference between the two training methods, and analyzed the differences in the existing auto-regulation programs' effectiveness. The overall results showed that the auto-regulation method was more effective than the fixed-loading method in maximum strength training (effect size = 0.64; P < 0.001; I 2 = 0%). In specific, the pooled results in subgroup analysis indicated that the auto-regulation method may effectively improve the strength performance in squat (effect size = 4.64; P < 0.05; I 2 = 54%) and bench press (effect size = 3.21; P < 0.05; I 2 = 62%). Greater benefits of the auto-regulation method on strength improvement could be achieved in an 8-week or even shorter training (effect size = 0.87; P < 0.001; I 2 = 0%) compared with those of 8–10 weeks (effect size = 0.32; P < 0.001; I 2 = 0%). The APRE is the most effective training program among the three auto-regulation programs (effect size = 0.78; P < 0.001; I 2 = 0%). In conclusion, the auto-regulation method could be more effective than the fixed-loading method in maximum strength training. The APRE is a convenient and effective training program that may be considered a practical training program to replace traditional training in athletes. [ABSTRACT FROM AUTHOR]

Background: Mechanical power output is recognized as a critical characteristic of an athlete with regard to superior performance during a competition. It seems fully justified that ballistic exercises, in which the external load is projected into a flight phase, as in the bench press throw (BPT), are the most commonly prescribed exercises for the development of power output. In addition, the muscular phenomenon known as post-activation performance enhancement (PAPE), which is an acute improvement in strength and power performance as a result of recent voluntary contractile history, has become the focus of many strength and conditioning training programs. Although the PAPE phenomenon is widely used in the upper-body training regimens, there are still several issues regarding training variables that facilitate the greatest increase in power output and need to be resolved. Objective: The purposes of this meta-analysis were to determine the effect of performing a conditioning activity (CA) on subsequent BPT performances and the influence of different types of CA, intra-complex rest intervals, and intensities during the CA on the upper-body PAPE effect in resistance-trained men. Methods: A search of electronic databases (MEDLINE, PubMed, and SPORTDiscus) was conducted to identify all studies that investigated the PAPE in the BPT up to August 2020. Eleven articles, which met the inclusion criteria, were consequently included for quality assessment and data extraction. All studies included 174 resistance-trained men [age: 25.2 ± 2.1 years; weight: 88.4 ± 7.5 kg; height: 1.82 ± 0.03 m; bench press (BP) relative strength: 1.31 ± 0.14 kg ± kg−1] as participants. Meta-analyses of standardized mean effect size (ES) between pre-CA mean and post-CA mean from individual studies were conducted using the random-effects model. Results: The effect of PAPE in the BPT was small (ES = 0.33; p < 0.01). The BP exercise as a CA at an intensity of 60–84% one-repetition maximum (1RM) (ES = 0.43) induced slightly greater PAPE effect than a ballistic–plyometric (ES = 0.29) and a BP exercise at ≥85% 1RM and at >100% 1RM as well as a concentric-only BP (ES = 0.23 and 0.22; ES = 0.11, respectively). A single set (ES = 0.37) of the CA resulted in a slightly greater effect than a multiple set (ES = 0.29). Moderate rest intervals induced a slightly greater PAPE effect for intensity below 85% 1RM (5–7 min, ES = 0.48) than shorter (0.15–4 min, ES = 0.4) and longer (≥8 min, ES = 0.36) intra-complex rest intervals. Considering an intensity above 85% 1RM during the CA, a moderate rest interval resulted in a similar PAPE effect (5–7 min, ES = 0.3) compared with longer (8 min, ES = 0.29) intra-complex rest interval, whereas shorter rest intervals resulted in a negative effect on BPT performance (0.15–4 min, ES = −0.13). Conclusion: The presented meta-analysis shows that performing a CA induces a small PAPE effect for the BPT performance in resistance-trained men. Individuals seeking to improve their BPT performance should consider preceding them with a single set of the BP exercise at moderate intensity (60–84% 1RM), performed 5–7 min before the explosive activity. [ABSTRACT FROM AUTHOR]