Search

Dual-wavelength interferometry (DWI) could extend the measured range of each single-wavelength interferometry. The synchronization of the two working wavelengths in DWI is of high efficient, and the generated moire fringe indirectly represents the information of the measured long synthetic-wavelength (λS) phase. However, the extraction of the measured synthetic-wavelength phase is rather arduous from the moire fringe. To retrieve the synthetic-wavelength phase from the moire fringe patterns, we present a carrier squeezing dual-wavelength interferometry method (CSDI) in simultaneous DWI (SDWI). After the mathematical square of the moire fringe patterns, the multiplicative moire phase-shift fringe patterns with π/2 phase shift at λS are combined into a single spatial-temporal fringe (STF). By converting the temporal phase shift into spatial carrier and the introduction of the carrier, the measured synthetic wavelength phase is retrieved by the filter and inverse Fourier transform of the STF spectrum. Compared with other methods, CSDI method could suppress the influence of the phase-shift error and only requires 4 frame phase-shift interferograms. Numerical simulations are executed to demonstrate the performance of the CSDI method in SDWI with the peak-to-valley (PV) value of 1.46 nm and the root mean square (RMS) values of 0.23 nm for the demodulated error. And the precision is better than PV of 20 nm (0.0059λs) and RMS of 6 nm (0.0017λs) even when the distribution range of the phase-shift error is as high as ± 10% relative to the π/2 phase shift step at λS. Finally, our experimental results indicate that the measurement accuracy is better than 1.3% for a step with the height of 7.8 µm, and 0.5% for the step height of 6.233 µm for a Fresnel lens.

Dual-wavelength interferometry could extend the measured range of single-wavelength interferometry by combining the two single wavelength phases, particularly for the measurement of step height. When testing the high-reflectivity surfaces with the single wavelength Fizeau interferometer, we have presented the π ∕ 4 phase-shift carrier squeezing interferometry (QCSI) method for phase extraction with multi-beam interference ( Appl. Opt . 55, 1920–1928, 2016). In this paper, we propose an integer and decimal portions synthetization (IDS) method for the multi-beam interference in the dual-wavelength Fizeau interferometer. One of the single wavelength wrapped phases is demodulated by the multi-beam interference QCSI algorithm, while the second of the single wavelength wrapped phases is extracted by the conventional two-beam interference phase-shift algorithm, so the equivalent wavelength unwrapped phase is derived from the two single wavelength wrapped phase. The decimal portion of synthesized phase is then obtained directly from the first single wavelength wrapped phase, and the integer portion of synthesized phase is obtained from the fringe order of the first single wavelength wrapped phase determined by the equivalent wavelength unwrapped phase. The proposed non-iterative IDS method avoids the common error magnification effect in the two-wavelength techniques, and only requires no more than 8 frame phase-shift interferograms for each single wavelength. Its robust performance is validated by both simulations and experiments in the presence of multi-beam interference as well as phase-shift error for measuring objects with height discontinuities.