Search

Zinc protoporphyrin IX (ZnPP) is known to accumulate in most meat products during storage. However, the pathway of its formation is not yet completely clarified. To gain more insights into the specificity of ZnPP occurrence, a SEC-HPLC-UV-fluorescence setup was established to screen the proteins in aqueous meat extracts for their ZnPP fluorescence during incubation. In accordance with previous studies it was identified by SDS-PAGE and MALDI-TOF-MS that ZnPP formation takes place in myoglobin. In this study, valuable new insights into the ZnPP forming pathway were gained, as our results indicated that a significant part of ZnPP – after being formed within the protein – is transitioned into free ZnPP during incubation. Additionally, the obtained results implied that ZnPP may also occur in proteins of higher molecular weight (>100 kDa).

A growing number of health-conscious individuals supplements their diet with protein-rich plant-based products to reduce their meat consumption. Analytical methods are needed to authenticate these new vegetarian products not only for the correct labelling of ingredients according to European legislation but also to discourage food fraud. This paper presents new biomarkers for a targeted proteomics LC-MS/MS work-flow that can simultaneously prove the presence/absence of garden pea, a protein-rich legume, meat and honey and quantify their content in processed vegan food. We show a novel rapid strategy to identify biomarkers for species authentication and the steps for the multi-parameter LC-MS/MS method validation and quantification. A high resolution triple time of flight mass spectrometer (HRMS) with SWATH Acquisition was used for the rapid discovery of all measurable trypsin-digested proteins in the individual ingredients. From these proteins, species-selective biomarkers were identified with BLAST and Skyline. Vicilin and convicilin (UniProt: D3VND9 , Q9M3X6 ) allow pea authentication with regard to other legume species. Myostatin (UniProt: O18831 ) is a single biomarker for all meat types. For honey, we identified three selective proteins (UniProt: C6K481 , C6K482 , Q3L6329). The final LC-MS/MS method can identity and quantify these markers simultaneously. Quantification occurs via external matrix calibration.

Investigations on the post mortal formation of fluorescent zinc protoporphyrin (ZnPP) IX in pork meat are currently in focus of meat science research. The role of myoglobin degradation in this context appears to be one of the most diversely discussed issues. To address this question meat-extracts of longissimus lumborum (LL) muscle (0.8 mg/mL) were incubated at 30 degrees C for up to 72 h and investigated by HPSEC-UV-fluorescence, SDS-PAGE and MALDI-TOF-MS. Between 0 and 72 h of incubation the fluorescence intensity (lambda(ex)./(em). = 420/590 nm) of the meat-extracts rose significantly (p < 0.001) from 10.9 +/- 0.8 to 34.8 +/- 0.3 (rel. units) while the staining intensity of the SDS-PAGE of myoglobin non-significantly (p > 0.4) changed from 6.2 +/- 0.5 x 105 to 5.0 +/- 0.3 x 105 (rel. units). The results indicate that ZnPP is formed by a Fe(II)-Zn(II)-substitution in myoglobin heme where an accompanying myoglobin degradation is not necessarily obligatory. (C) 2017 Elsevier Ltd. All rights reserved.

Honey traceability is an important topic, especially for honeydew honeys, due to the increased incidence of adulteration. This study aimed to establish specific markers to quantify proteins in honey. A proteomics strategy to identify marker peptides from bracatinga honeydew honey was therefore developed. The proteomics approach was based on initial untargeted identification of honey proteins and peptides by LC-ESI-Triple-TOF-MS/MS, which identified the major royal jelly proteins (MRJP) presence. Afterwards, the peptides were selected by the in silico digestion. The marker peptides were quantified by the developed targeted LC-QqQ-MS/MS method, which provided good linearity and specificity, besides recoveries between 92 and 100% to quantify peptides from bracatinga honeydew honey. The uniqueness and high response in mass spectrometry were backed by further complementary protein analysis (SDS-PAGE). The selected marker peptides EALPHVPIFDR (MRJP 1), ILGANVK (MRJP 2), TFVTIER (MRJP 3), QNIDVVAR (MRJP 4), FINNDYNFNEVNFR (MRJP 5) and LLQPYPDWSWTK (MRJP 7), quantified by LC-QqQ-MS/MS, highlighted that the content of QNIDVVAR from MRJP 4 could be used to differentiate bracatinga honeydew honey from floral honeys (p

Cold plasma is considered to be a novel, non-thermal, chemical-free and eco-friendly disinfection and surface modification technology. Plasma treatment of air to generate the so called plasma processed air (PPA) induces the formation of reactive oxygen (ROS) and nitrogen species (RNS). As a result, PPA has a different chemical composition compared to untreated air and suits therefore as an alternative method for microbial disinfection. However, depending on the product properties of the food matrix and its composition, a number of plasma-induced reactions also need to be taken into consideration. This necessitates also the elucidation and understanding of the basic interactions of plasma species with bioactive compounds. The intention here is to avoid the degradation of these valuable substances and to prevent other undesirable effects in future food related applications. In the present study, the effects of PPA treatment on selected antioxidants such as pyrocatechol and derivatives of hydroxycinnimic acid were investigated in model systems to specify possible reactions induced. Antioxidant capacity, pH value, UV–Vis spectroscopy, RP-HPLC and LC-MS analysis were applied to identify reaction products providing information on possible changes induced in food matrices by PPA treatment. Exposure to PPA caused a perceptible color change towards yellow-brown accompanied by a strong reduction of the pH and the formation of insoluble sediments in the model solutions. The accumulation of nitrate, nitrite, but not of hydrogen peroxide was shown. LC-MS analysis demonstrated the formation of plasma-modified derivatives in all tested systems. The main reactions in liquid model solutions exposed to PPA were attributed to oxidation, nitration and polymerization of the phenolic compounds.

In this study, structural changes in micellar caseins and whey proteins due to high pressure - low temperature treatments (HPLT) were investigated and compared to changes caused by high pressure treatments at room temperature. Whey protein isolate (WPI) solutions as well as micellar casein (MC) dispersions and mixtures were treated at 500 MPa (pH 7.0 and 5.8) at room temperature, -15 degrees C and -35 degrees C. Surface hydrophobicity and accessible thiol groups remained nearly unchanged after HPLT treatments whereas HP treatments at room temperature caused an unfolding of the WPI, resulting in an increase in surface hydrophobicity and exposure of the thiol groups. For HPLT treatments, distinct changes in the secondary structure (increase in the amount of beta-sheets) were observed while the tertiary structure remained unchanged. Large flocs, stabilized by hydrophobic interactions and hydrogen bonds, were formed in casein containing samples due to HPLT treatments. Depending on the pH and the applied HPLT treatment parameters, these interactions differed significantly from the interactions determined in native micelles. (C) 2015 Elsevier Ltd. All rights reserved.

The stems of Abrus precatorius were used to extract a beta-amylase enriched fraction. A three phase partitioning method and a Doehlert design with 3 variables (ratio of crude extract/t-butanol, the ammonium sulphate saturation and pH) were used. The data was fitted in a second-order polynomial model and the parameters were optimized to enrich beta-amylase. Experimental responses for the modulation were recovery of activity and the purification factor. The optimal conditions were: a ratio of crude extract/t-butanol of 0.87 (v/v), saturation in ammonium sulphate of 49.46% (w/v) and a pH of 5.2. An activity recovery of 156.2% and a purification factor of 10.17 were found. The enriched enzyme was identified as a beta-amylase and its molecular weight was 60.1 kDa. K-m and V-max values were 79.37 mg/ml and 5.13 U/ml, respectively and the highest activity was registered at a temperature of 70 degrees C and a pH between 6 and 6.5. A significant stabilization of the beta-amylase was observed up to 65 degrees C. (C) 2015 Elsevier Ltd. All rights reserved.

The application of technical enzymes is a potential tool in modulating the dough and baking quality of cereal products. No endogenous amylases (alpha- and beta-forms) are present in mature wheat grains; they may be synthesized or activated during germination. Hence, microbial alpha-amylases are added to the dough, being resistant to the endogenous alpha-amylase/trypsin inhibitors. Here, we report on the initial identification of two technical enzymes from a commercial sample based on an in-gel tryptic digestion coupled with MALDI-MS analysis. The primary component of the protein fraction with 51.3 kDa was alpha-amylase from Aspergillus species. A second major protein with 24.8 kDa was identified as endo-1,4-xylanase from Thermomyces lanuginosus. In the following experimental work up, a targeted proteomics approach utilizing the combination of specific proteolytic digestion of the added amylase and xylanase in wheat flour, dough or baked products, solid phase extraction of released peptides and their detection using LC-MS/MS was optimized. The targeted (MRM) MS/MS peptide signals showed that the peptide "ALSSALHER" (MW = 983) originating from amylase and "GWNPGLNAR" (MW = 983) from xylanase can be used to identify the corresponding technical enzymes added. Consequently, locally available baked products were tested and found to contain these enzymes as supplementary ingredients. (C) 2014 Elsevier Ltd. All rights reserved.

The carotenoid lutein can improve human health. Since only a fraction is absorbed from food, lutein supplementation might be recommended. Emulsions could be good carrier systems to improve the bioavailability of lutein. Six different emulsifier compositions were used in this study to prepare lutein-loaded emulsions: β-lactoglobulin, β-lactoglobulin/lecithin, Biozate 1, Biozate 1/lecithin, Tween 20 and Tween 20/lecithin. The droplet size, resistance to creaming, lutein stability, cytotoxicity and lutein uptake by HT29 cells were investigated. The whey protein β-lactoglobulin, the whey protein hydrolysate Biozate 1 and the combination with lecithin brought the most promising results. The small droplet sizes and resistance to creaming were an indication of physical stable emulsions. Furthermore, these emulsifiers prevented oxidation of lutein. The choice of emulsifier had a strong impact on the uptake by HT29 cells. The highest lutein absorption was observed with the combination of Biozate 1 and lecithin.

Childhood malnutrition is a current and perpetual public health concern in many African countries. Challenges remain the difficulty in formulating nutritionally adequate diets. This study was carried out to investigate the effect of Dioscorea schimperiana flesh color on nutritional composition and antioxidant activity of formulated yam based complementary food. Flours from dried yam slices bought on local market were fortified with soybean and groundnut paste to develop a balanced diet. Carrot and egg shell were added as reinforcing sources of micronutrients. The nutritional content and antioxidant properties of the flour blends were then assessed. Results indicate the flour blendes satisfy the recommended energy and macronutrients requirements according to set standards. Thus the flour blends can be used for managing protein-energy malnutrition. They can also offer health benefits due the composition of many bioactive compounds. The amount of carotenoids, α tocopherol, total phenols, zinc and iron in yam-based formulations depended on the color of the yam flesh. Βeta carotene was the major carotenoid present. The yellow-fleshed yam flour blend had the highest content (10 mg/100 g) of polyphenolic compounds but comparatively lower antioxidant activity. In contrary, yellow-fleshed with red dots flour blend had the highest antioxidant activity (0.218 M Trolox equivalents/100 g) and the lowest content (8 mg/100 g) of the responsive bioactive compounds. The red-fleshed yam based complementary food had the highest content in these micronutrients. Feeding 6–11 months old children with yam-based complementary food would satisfy 23–77.4% of the 200 µg daily minimum suggested reference retinol activity intake of vitamin A and 8.20–30.48% of the 2.5 mg α-tocopherol requirement. At this stage of growth, yam based complementary food would satisfy 68–100% of the average daily minimum reference intake of zinc and 63–100% of iron daily requirements according to the daily serving portion needed to satisfy the 200–550 energy requirement. Taking into consideration their contribution in meeting the micronutrients daily intake suggested reference values; the weaning flour is most suitable for a 12–23 month old child. Keywords: Childhood malnutrition, Balanced diet, Dioscorea schimperiana

Whey proteins are widely used food ingredients due to their nutritional and functional properties (gelling, emulsifying, foaming). Owning to their structure (free thiol group, lysine residues, hydrophobic pocket), they can also be used as carriers for bioactives. In this study, conjugates between β-lactoglobulin (β-lg), and a bioactive metabolite from Brassicaceae vegetables, allyl isothiocyanate (AITC) were formed. Heat aggregation behavior (85 °C, 15 min), foaming and emulsifying properties of conjugates, at pH 4.0 and 7.1, were evaluated. Conjugates were formed by incubating β-lg (0.5 mM) with AITC (0.05–20 mM) in water at pH 8.5 and room temperature. AITC primarily reacted with β-lg’s free thiol group (KD = 0.2 ± 0.1 mM) and thereafter with its amino groups (KD = 10.8 ± 3.4 mM). AITC binding destabilized secondary and tertiary structure of β-lg at pH 7.1, whereas induced molten globule conformation at pH 4.0. Conjugation reduced the heat aggregation of β-lg at pH 7.1, while promoting it at pH 4.0. Conjugates adsorbed faster to air/water and oil/water interfaces at pH 4.0 than at pH 7.1. After 30 min, air/water surface tension was lower at pH 4.0 (47 mN m−1) than at pH 7.1 (57 mN m−1), while the surface tension of the oil/water interface was 8 mN m−1 at both pHs. Foams produced with β-lg–AITC conjugates at pH 4.0 exhibited higher volume and liquid stabilities compared to foams obtained at pH 7.1. Emulsions formed with conjugates at both pHs were destabilized by creaming due to flocculation, but coalescence was prevented. This study revealed that whey protein could potentially be used for the delivery of isothiocyanates in the form of foam or emulsion-based products.

Lysozyme was modified by covalent attachment of selected phenolic compounds (m-, o-, p-dihydroxybenzenes, ferulic and gallic acid) at pH 9. The derivatives formed were characterized in terms of their physicochemical and digestion properties. The derivatization was accompanied by a reduction of lysine and tryptophan residues. Moreover, the solubility of the derivatives decreased over a broad pH range and the derivatization increased the hydrophobicity. The isoelectric points were shifted to lower pH values and formation of high molecular weight fractions occurred. In vitro experiments showed that, the peptic digestion of the derivatized lysozyme was adversely affected, whereas the tryptic, chymotryptic and pancreatic hydrolysis seemed to be favoured. The lytic activity of all the resulting lysozyme derivatives was reduced.

Two major groups of non-protein components effects the degradability of proteins. The first one includes the major nutrients and their degradation products e.g. of carbohydrates and fats, which may undergo the typical "MAILLARD" reaction with proteins. The second one includes those minor components represented e.g. by the indigenous group of secondary plant metabolites. This paper focuses on protein degradability as effected by interactions of proteins with secondary plant metabolites giving special attention to the group of phenolic compounds.

An approach has been used to improve the functional properties of soy proteins using mechanolysis (vibrating mill). The results indicate a close relationship between structural changes dependent on the duration of milling and the foaming properties of the investigated sample. It was observed that the solubility, amount of free amino groups, surface hydrophobicity and lipid content decreased with the extent of modification. RP-HPLC results show that in the early stages of mechanolysis, the protein molecule becomes hydrophobic. In the latter stages changes in functional properties such as foaming and water binding capacity could be observed possibly due to release of hydrophilic components. SDS—PAGE and GPC results show that changes in molecular weight due to mechanolysis can be classified depending on length of modification time in three transitional phases (dissociation, aggregation and degradation). The results of particle analysis confirms that a decrease in particle size correlates with an improvement of the foaming properties.