Search

Highlights: [•] Highly thermally degraded MEA samples still retained some capacity to remove CO2. [•] Amongst other degradation products, 2-oxazolidone, HEEDA and HEIA were the major. [•] HEIA was indicated as the most stable thermal degradation product. [•] Corrosion of the stainless steel equipment was observed. [ABSTRACT FROM AUTHOR]

Abstract: Vermicompost was produced from a green waste compost feedstock and assessed for its potential use in a high value horticultural market. Replicated plant growth trials were undertaken with lettuce using pure worm cast (vermicompost), green waste-derived compost and mixtures of the two, i.e. 50/50 (v/v) and 20/80 (v/v) of worm casts and green waste feedstock. Results showed that plant biomass production was optimal with a 20/80 (v/v) compost blend, whilst pure worm cast and green waste compost yielded poor growth. Leaf chlorophyll content indicated that pure worm cast inhibited plant growth and depressed N content, whereas plant grown with the other treatments contained similar amounts of chlorophyll. In general, the vermicomposting process did not result in an increased availability of nutrients or potentially toxic elements, the only exception being Zn. [Copyright &y& Elsevier]

Abstract: Hydrous ferric oxide (here termed ‘ochre’) sludge, an abundant waste product produced from the treatment of acid mine drainage (AMD), was used in this study for the removal of phosphorus (in the form of phosphate ions) from contaminated waters. The phosphorus uptake capacities of both raw and pelletized AMD solids were compared using batch and column tests. Addition of a cement binder to the AMD solids during pellet production led to significantly increased P-loading of the resultant solids compared to the raw sludge. Additionally, the pellets were found to continue to remove P in tests up to 7d in duration whereas the unbound AMD sludge appeared to approach equilibrium with phosphate solution after approximately 60min of contact time. In line with previous studies P uptake by the AMD solids was found to be primarily via adsorption. By contrast calcium phosphate precipitation was found to be the dominant removal mechanism for the cement-bound ochre pellets with a relatively small proportion of removal attributable to the AMD solids. SEM–EDX analysis of the surface of used pellets showed a Ca:P molar ratio close to that of hydroxyapatite (HAP). Continuous column tests on these pellets showed a rapid decrease in P removal capacity by the pellets over time, attributable to the formation of a passivating HAP surface layer. [Copyright &y& Elsevier]