Search

In this study, carbon fiber paper (CFP) was prepared by adding carboxyl nitrile latex (XNBRL) and phenolic resin (PF) into the carbon fibers suspension instead of the immersion method. It was found that XNBRL and PF adsorbed and flocculated on the surface of the carbon fibers as cationic agent was used. And with the increase of XNBRL addition, the retention rate of the pulp and the size of the flocs gradually increased. Due to the low residual carbon rate of XNBRL, most of it was decomposed into small molecular gases during carbonization, with the increase of XNBRL addition, the CFP became fluffy gradually, and its thickness, resistivity and air permeability increased, while the density and tensile strength decreased, and the basis weight was basically unchanged. Owing to the high residual carbon rate of PF, the basis weight, density and tensile strength of the CFP gradually increased with the increase of PF addition, while the thickness, resistivity and air permeability gradually decreased. Therefore, XNBRL could promote the retention of PF during paper forming, when the XNBRL dosage was 60 wt% and PF was 300 wt%, the basis weight of CFP was 74.55 g/m2, the thickness was 0.22 mm, the tensile strength was 10.85 MPa, the resistivity was 0.0284 Ω·cm, and the air permeability was 2005.34 mL·mm/ (cm2·h·mmHg). • Carbon fiber paper was prepared using carboxyl nitrile latex and phenolic resin in-pulp addition method. • The retention rate of the pulp and the flocs size gradually increased with the increase of carboxyl nitrile latex content. • Carbon fiber paper exhibited excellent comprehensive performance. [ABSTRACT FROM AUTHOR]

Novel highly foldable HAp ceramic paper with fire retardancy but without fiber was fabricated via novel non-solvent displacement nonaqueous precipitation strategy. The obtained HAp ceramic paper, characterized by highly smooth and glossy, is characterized via X-ray diffraction (XRD), field-emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), curlability test, moisture absorbency and Pb2+ removal performance test. The results show that the ceramic paper is very straight, uniform, and smooth with high curlability and low moisture absorption. No fiber is detected in the ceramic paper. No defect is either detected except for at the edge area. The HAp ceramic paper is grown along the (002) crystal plane of the hydroxyapatite phase from hexagonal plate like single crystal sheets. The ceramic paper loaded for four times has formed a clear four-layer-structured, with a total thickness of about 832 nm. The thickness of each layer is very uniform, with an average thickness of about 208 nm per layer. HAp ceramic paper has excellent Pb2+ ions removal performance, curling performance, moisture absorption performance and flame retardant performance. These performances confirm this novel HAp ceramic paper has superior properties over the traditional ceramic paper with fibers and shows great application prospect in various fields. [ABSTRACT FROM AUTHOR]

Citation scores (CS) have been traditionally used to measure the impact of scientific publications. Sourced from the Internet, Altmetric Attention Scores (AAS) are complementary metrics that assess how often publications are discussed and used globally. We compared by rank the top 500 papers by CS and AAS published in Clinical Nutrition with corresponding AAS and CS. A search for all publications in Clinical Nutrition was performed on Dimensions (https://app.dimensions.ai/discover/publication) on 3rd April 2024. Outputs were ranked according to CS and then by AAS with the top 500 in each category selected. Scores, year and type of publication were recorded. Correlation was expressed as the Spearman's rank coefficient (ϱ). We identified 18,790 outputs. Within the top 500 publications ranked by CS, there was a significant weak positive correlation (ϱ = 0.235, P < 0.0001) between CS [median (IQR) 149 (116–223)] and AAS [7 (3–22)]. Ranked by AAS, there was a non-significant very weak positive correlation (ϱ = 0.072, P = 0.106) between AAS [55.5 (36–115)] and CS [42 (16.5–94.5)]. Trends remained similar when grouped by publication type. Guidelines, ranked by CS, had the highest CS and ranked by AAS, the highest CS and AAS. Publications per year, by year, ranked by CS, had a negatively skewed distribution peaking in 2012 and declined thereafter, but when ranked by AAS, had a moderately positive linear trend from 2001 to 2024 (ϱ = 0.513, P < 0.0001). Correlation between CS and AAS was weak. Guidelines had the highest CS and AAS. CS are iterative taking years to mature while AAS are immediate. [ABSTRACT FROM AUTHOR]

Urgent global action is required to combat climate change, with radiographers poised to play a significant role in reducing healthcare's environmental impact. This paper explores radiography-related activities and factors in resource-limited departments contributing to the carbon footprint and proposes strategies for mitigation. The rationale is to discuss the literature regarding these contributing factors and to raise awareness about how to promote sustainability activities in clinical radiography practice and education in resource-limited countries. The radiography-related activities and factors contributing to the carbon footprint in resource-limited countries include the use of old equipment and energy inefficiency, insufficient clean energy to power equipment, long-distance commuting for radiological examinations, high film usage and waste, inadequate training and research on sustainable practices, as well as limited policies to drive support for sustainability. Addressing these issues requires a multifaceted approach. Firstly, financial assistance and partnerships are needed to adopt eco-friendly technologies and clean energy sources to power equipment, thus tackling issues related to old equipment and energy inefficiency. Transitioning to digital radiography can mitigate the environmental impact of high film usage and waste, while collaboration between governments, healthcare organisations, and international stakeholders can improve access to radiological services, reducing long-distance commuting. Additionally, promoting education programmes and research efforts in sustainability will empower radiographers with the knowledge to practice sustainably, complemented by clear policies such as green imaging practices to guide and incentivise the adoption of sustainable practices. These integrated solutions can significantly reduce the carbon footprint of radiography activities in resource-limited settings while enhancing healthcare delivery. Radiography-related activities and factors in resource-limited departments contributing to the carbon footprint are multifaceted but can be addressed through concerted efforts. Addressing the challenges posed by old equipment, energy inefficiency, high film usage, and inadequate training through collaborative efforts and robust policy implementation is essential for promoting sustainable radiography practices in resource-limited countries. Radiographers in these countries need to be aware of these factors contributing to the carbon footprint and begin to work with the relevant stakeholders to mitigate them. Furthermore, there is a need for them to engage in education programmes and research efforts in sustainability to empower them with the right knowledge and understanding to practice sustainably. [ABSTRACT FROM AUTHOR]

Primary care healthcare professionals (PCHPs) are pivotal in managing chronic diseases and present a unique opportunity for nutrition-related disease prevention. However, the active involvement of PCHPs in nutritional care is limited, influenced by factors like insufficient education, lack of resources, and time constraints. In this position paper The European Society for Clinical Nutrition and Metabolism (ESPEN) promotes the active engagement of PCHPs in nutritional care. We emphasize the importance of early detection of malnutrition by screening and diagnosis, particularly in all individuals presenting with risk factors such as older age, chronic disease, post-acute disease conditions and after hospitalization for any cause. ESPEN proposes a strategic roadmap to empower PCHPs in clinical nutrition, focusing on education, tools, and multidisciplinary collaboration. The aim is to integrate nutrition into medical curricula, provide simple screening tools for primary care, and establish referral pathways to address malnutrition systematically. In conclusion, we urge for collaboration with PCHP organizations to raise awareness, enhance nutrition skills, facilitate dietitian accessibility, establish multidisciplinary teams, and promote referral pathways, thereby addressing the underestimated clinical challenge of malnutrition in primary care. [ABSTRACT FROM AUTHOR]

Understanding the intellectual structure of geosciences is crucial for identifying emerging topics, which can guide future research and funding strategies. This study employs Latent Dirichlet Allocation (LDA) topic modeling and co-word network analysis to explore the intellectual landscape of highly cited geoscientific papers. Through empirical analysis, the study identifies 15 research areas, including climate change, geological processes, environmental impacts, and advancements in data analysis and remote sensing. These findings highlight the prominent role of big data analysis and machine learning methods across various geoscientific domains. Additionally, a notable gap has been identified in the integration of these computational methods with research on organic chemistry and formation processes, suggesting a potential direction for future exploration and innovation. [ABSTRACT FROM AUTHOR]