Search

Industrial energy management is critical to ensuring efficient energy usage, market viability, and greenhouse gas emission reductions. In this study, the aim is to investigate energy management practices in paper and pulp industries (PPI) of Bangladesh. The study identifies several barriers to adopt energy management practices; "Lack of governmental attention", "Inadequate staff awareness" and "limited access to capital" are identified as the major constraints. In addition, HVAC systems and compressed air systems present higher barriers compared to electrical motor and pump systems while looking at the barriers by technology areas. On the other hand, "Owner's demand", "Commitment from the top management" and "Pressure from the customers and different non-Governmental organization" are found to be the dominant drivers of energy management in the studied PPI. Energy management practices can enhance the energy efficiency approximately by 4–5 % according to the study. Furthermore, this study reveals that the majority of PPIs are unaware of the energy service companies (ESCO) with the lack of a standardized system for energy audit, as well as a lack of trust and information, appearing to be the obstacles behind this. • Energy management practices in paper and pulp industries of Bangladesh are shown. • Barriers and drivers to energy management practices in paper and pulp industry are presented. • Barriers to energy efficiency measures by technology area are discussed. • Barriers to consult energy service companies (ESCOs) are presented. [ABSTRACT FROM AUTHOR]

The current challenge facing the European pulp and paper industry is how to materialize the transformation to a bio-economy, as well as to realize the necessary new green innovations. The risks, costs and constraints of doing business will increase, thereby further intensifying competition, but at the same time new business opportunities will open up. This study adopts a three-round dissensus-based Delphi approach in order to explore our key research question of how the pulp and paper industry may change strategically, and what is the potential for value creation in the year 2030. According to our expert panel, the main drivers of competitiveness in 2030 will include energy and material efficiency, sustainability, as well as new innovations in products to serve customer needs better. According to the projected 2030 scenario, the pulp and paper industry will produce more diversified products, focus on higher value-added, and aim at consumer segments with higher environmental awareness. On average, 40 percent of the turnover will according to the panel come from genuinely new products. Strategic cross-sectorial partnerships will have a key role in making this big leap, while simultaneously acknowledging the changing needs of sustainability-conscious customers and other stakeholders. [ABSTRACT FROM AUTHOR]

China is the top emitter of greenhouse gases in the world. Pulp and paper industry is one of eight the strictly regulated industries about carbon emission in China. However, estimates of carbon emissions from China's pulp and paper industry have been suffered from remarkable uncertainty. It is summarized that is aroused by the inaccuracy of factors evaluating energy consumption, and the huge gap between the calculation standards for assessing energy consumption in the production process and the actual level recorded in the factories. This paper re-evaluated the carbon emission of China's pulp and paper industry from the perspective of life cycle assessment, and applied more accurate emission factors, taking account of the actual energy consumption of the production process in factories, to estimate the actual carbon emissions in maximum. It is found that the national standards about the energy consumption quota of China's pulp and paper industry is no longer applicable, and the actual energy consumption regulated in the production process is far better than the advanced level given by the national standards. The greenhouse gas emission have been seriously overestimated approximately 12.00%–56.17% by international organizations. • Life Cycle Analysis of the China's pulp and paper Industry is conducted thoroughly. • The pulp flow of China's pulp and paper Industry is analyzed. • Energy regulated in factory is far better than the national standards' required. • Carbon emissions of China's pulp and paper Industry are overestimated. [ABSTRACT FROM AUTHOR]

Research has revealed the existence of an energy-efficiency gap – the difference between optimal and actual energy end-use, suggesting that energy efficiency can be improved. Energy management (EnM) is a means for improving industrial energy efficiency. However, due to various barriers, the full potential of EnM is not realised. Several studies have addressed drivers and barriers to energy efficiency but few to EnM. This study aims to identify EnM practices, the most important perceived drivers and barriers for EnM, and relations among them in the energy-intensive Swedish pulp and paper industry (PPI), which has the longest experience internationally of practising EnM systems, and has worked according to the standards since 2004. Our results show that, altogether, the PPI works regularly and continuously with EnM, with a clear division of responsibilities. The highest maturity for EnM practices was for energy policy, followed by organization, investments, and performance measurement. The study also shows that communication between middle management and operations personnel has potential for improvement. The most important categories of drivers were economic, whereas for barriers they were organizational. Nevertheless, knowledge-related barriers and drivers were amongst the most important, suggesting that the absorptive capacity for energy issues could be improved. Image 1029 • Energy is managed continuously, with clear policies and responsibilities. • The main drivers are economical while main barriers are organizational. • Knowledge related barriers and drivers are amongst the next most important. • Employees' absorptive capacity for energy issues could be improved. • Link between energy policy and performance measurement could be improved. [ABSTRACT FROM AUTHOR]

The increasing use of recycled paper by the paper industry to support the Green Industry in the Indonesian Pulp and Paper Industry. But technically, there are some disadvantages of recycled fiber usage such as low drainage rate in which boosted the high energy consumption on drying process. As already known, the drying process consumes the highest energy in papermaking. To overcome this problem, the research using the concentrate of endoglucanase Egl-II has done. The steps of research included production of endoglucanase Egl-II; concentration by ultrafiltration method, modification of recycled paper fibers using endoglucanase Egl-II; characterization of paper sheet; and evaluation of energy consumption in drying the sheet of paper. The results showed that endoglucanase Egl-II had increase drainage rate of recycled fiber stock, which indicate by the freeness number. The number had increased by 80 ml CSF (Canadian Standard Freeness) from 190 ml CSF to 270 ml CSF, and fiber retention increased by 0,63% from 99,31% to 99,94%. The dissolved cellobiose test results of recycled fiber stock by the enzyme treatment at low dosage showed that no degradation of cellulose, no change into soluble sugars. Characterization of sheet of paper that has been modified with endoglucanase Egl-II based FTIR spectra showed no change in functional group, SEM results showed on the fiber surface fibrils grow more, and the results of the XRD analysis showed area reduction of amorphous regions is about 6%. The potential for energy efficiency is calculated through thermodynamic approach is about 15%. [ABSTRACT FROM AUTHOR]

With the surging energy price and environmental concerns, measures to improve energy efficiency have attracted increasing concerns of the manufacture sector, especially energy-intensive manufacturing industries such as tissue paper mills. Energy-efficiency scheduling, as a novel energy-efficient method, has attracted the attention of an increasing number of researchers in recent years. Drying process is the most energy-intensive production process in tissue paper mills, which has a great energy-saving potential. This paper aims to reduce the energy costs for the tissue paper mill, consisting of processing energy cost and set-up energy cost, through integrating drying process optimization with energy-efficient scheduling. First, the energy cost model and the scheduling model were built. Then, the energy cost of the drying process of every job in a given scheduling problem was optimized using particle swarm optimization (PSO). Afterwards, the energy cost was further optimized using energy-efficiency scheduling. In addition, a hybrid non-dominated sorting genetic algorithm II (NSGA-II) was utilized to solve the energy-efficiency scheduling problem. Finally, several real scheduling problems from a real tissue paper mill were addressed using the proposed approach to demonstrate its effectiveness in energy saving. The experiment result showed that there is a great energy-saving potential in the drying process, accounting for up to 12.53% of the total energy consumption. Moreover, the maximum energy saving ratio of the proposed approach could reach 9.03%. On the whole, the proposed approach can provide a new energy-saving method for tissue paper mills or other manufacturing industries. [ABSTRACT FROM AUTHOR]

Guiding industries to produce in an effective and environmentally sustainable manner has become a key issue for governments around the world. Over the past 15 years, series of regional and industrial development policies have been introduced by the Chinese government. This has influenced the geographical distribution and energy efficiency performance of China’s industries. This paper quantifies the influence of enterprises geographical distribution on energy efficiency improvement in the paper industry and aims at providing some helpful suggestions on industrial development to policy makers. The main results show that, firstly, the paper industry in eastern China shows obvious characteristic of agglomeration. The average location quotient is 1.2278. However, following the industrial and regional development policies, the characteristic of agglomeration is weakening. Secondly, only when agglomeration reaches a certain level (location quotient is above 0.5447) will industrial agglomeration positively impact on industrial energy efficiency improvement (a 1% increase in agglomeration will increase dynamic energy efficiency by at least 0.23%). Thirdly, the regional development policies carried out by the government slow the pace of energy efficiency improvement in China’s paper industry. The empirical results indicate that the government needs to consider regional characteristics and consciously guide industrial enterprises to concentrate in the dominant area. [ABSTRACT FROM AUTHOR]

Renewable energy production throughout low-voltage grids has gradually increased in electrical distribution systems, therefore introducing small energy producers - prosumers. This paradigm challenges the traditional unidirectional energy distribution flow to include disperse power production from renewables. To understand how energy usage can be optimized in the dynamic electrical grid, it is important to understand the behavior of prosumers and their impact on the grid's operational procedures. The main focus of this study is to investigate how grid operators can obtain an automatic data-driven system for the low-voltage electrical grid management, by analyzing the available grid topology and time-series consumption data from a real-life test area. The aim is to argue for how different consumer profiles, clustering and prediction methods contribute to the grid-related operations. Ultimately, this work is intended for future research directions that can contribute to improving the trade-off between systematic and scalable data models and software computational challenges. [ABSTRACT FROM AUTHOR]

Abstract Papermaking enterprises are currently under both environmental pressure and economic pressure for sustainable development in China. Thus, the efficiency, effectiveness, and benefits of resource utilization need to be improved. High-consumption and high-pollution companies should manufacture paper using sustainable methods. This study highlights a resource value flow analysis from the circular economy perspective, developing an extension of material flow cost accounting and modifying it by accounting for environmental damage as well as economic benefits. With reference to the Plan-Do-Check-Act cycle, this specific case study was conducted to verify the comprehensive utility of resource value flow analysis by establishing decision-making prioritization according to the dualistic diagnosis of "internal resource loss–external environmental damage costs." In general, applying a resource value flow analysis can both reduce resource consumption and minimize environmental damage, enhancing the sustainable development of a process industry with limited resources. Highlights • Material flows and value flows form an interactive unit in the resource value flow analysis model. • The resource value flow analysis model extends the environmental dimension of material flow cost accounting. • A dualistic diagnosis of "internal resource loss and external environmental damage costs" can achieve both economic profits and environmental benefits. • The Plan-Do-Check-Act cycle was introduced to strengthen the practical application of the resource value flow analysis. [ABSTRACT FROM AUTHOR]

Abstract With the advent of the Paris Climate Agreement and China ratifying it recently, there is a need to adopt a diversified approach to address climate change; this is especially the case of promoting residential energy conservation. This study is one of the first household energy intervention studies that focuses on the comparison of two message delivering means, paper-based versus instant messaging tool, as a platform for sharing energy-saving tips and engaging households to save energy in China. Conducted in several communities in Hangzhou, Zhejiang Province of China, the effectiveness of using a widely used application known as WeChat in promoting household energy conservation is compared with that of using stickers. It was found that WeChat is the most effective is reducing monthly consumption, but the effects are short-lived. Comparatively, using stickers as a mean of engaging households produces more sustained results in terms of energy savings. This study also provides evidence to correlate the changes in energy consumption behavior with personal perception of one's responsibility and quality of life. That is, certain behavior can be triggered if residents are willing to impose energy ration in their households or are given more opportunities in the form of local programs that enable them to have more practices in energy conservation. [ABSTRACT FROM AUTHOR]

Abstract: The aim of the study is to model and to simulate the thermal and electrical efficiencies of the cogeneration plant of a paper mill. The final purpose is the benefits optimization by adjusting production to the amount of energy to be sold. It is necessary to know it because the sale price goes down when the actual production of electrical energy does not match the scheduled power. [Copyright &y& Elsevier]

China’s paper industry consumes a lot of energy and emits huge amounts of pollutions. The Chinese government over the past decades has done a lot to promote energy efficiency of the industry. This paper studies the impact of industrial polices to improve energy efficiency. The energy efficiency change is firstly studied under a framework of total factor efficiency. On this basis, different econometric models are built to discuss the detailed energy efficiency characteristics of the paper industry. The main results are as follow: (i) ownership structure did influence the energy efficiency, but the influence is different in different conditions; (ii) energy efficiency of the paper industry can be improved by economies of scale; (iii) market competition can to some extent overcome the motivation and supervision problem that often occur in state-owned companies; (iv) energy price cannot play the role of resource allocation well in China. Finally, based on our findings, some suggestions are provided. [ABSTRACT FROM AUTHOR]

The objective of this study was to determine the effect of electrical conductivity, pH and temperature which were kept constant during treatment via an advanced control strategy on chemical oxygen demand, color, turbidity and total suspended solids removal and energy consumption. Central Composite Design matrices were formed for aluminum and iron electrode systems separately with different combinations of 5 independent variables (electrical conductivity, pH, temperature, current intensity and electrolysis time). Obtained results revealed that aluminum electrode system was found to be more effective than iron electrode system under controlled conditions. Comparison of uncontrolled and controlled studies at optimum values of aluminum electrode system showed an increase by 31.67% in chemical oxygen demand removal and a decrease by 48.30% in energy consumption under controlled case. Results indicated that constant electrical conductivity, pH and temperature during electrocoagulation process of pulp and paper mill wastewater by means of a controller enhanced treatment efficiency. [ABSTRACT FROM AUTHOR]

Abstract: There is a large value in making Pulp and Paper mills more energy efficient. ABB has developed an energy assessment service where opportunities to save energy in the paper machine are identified. The energy assessment is done by quantifying energy flows, benchmarking energy users, data mining and steam sensitivity analysis and by experiments and additional measurements at the paper machine. Energy quantification helped in identifying main energy consumer, benchmarking was useful to assess the gap between operating performance and best performance whereas data mining and steam sensitivity analysis helped in studying the impact of key operating variables on performance of paper machines. After the assessment an action plan was presented to the mill for energy efficiency improvement together with a return on investment. [Copyright &y& Elsevier]

Abstract: This article introduces a bottom-up global model of the pulp and paper sector (PULPSIM) with a focus on energy consumption and carbon emissions. It is an annual recursive simulation behavioural model with a 2030 time horizon incorporating several technological details of the industry for 47 world regions. The long time horizon and the modular structure allow the model users to assess the effects of different environmental, energy and climate policies in a scenario comparison setup. In addition to the business as usual developments of the sector, a climate commitment scenario has been analysed, in which the impacts of changing forest management practices are also included. The climate scenario results reveal that there is a significant carbon reduction potential in the pulp and paper making, showing a number of specific features: the central role of the fibrous resource inputs and the potential impact of increased waste wood and black liquor based heat generation. [Copyright &y& Elsevier]

Paper industry is one of major material and energy users in Finland, material costs being far bigger than energy costs. Energy saving is promoted in Finland by an energy service centre, subsidies and energy service companies (ESCOs). Material savings in production processes are typically used to reduce costs while life cycle material efficiency rather would require focusing, e.g. on product design. This could be promoted by total producer responsibility, economic instruments and environmental permits. For industrial sites with limited resources, MASCOs’ (Material Saving Companies) services could manage material savings, e.g. by funding the investments, planning and running the project. Authorities should put more emphasis on material auditing and information on material saving technologies and logistics. Material savings should also be included into the environmental permitting procedures. Materials saving services are developing and the projected Finnish material efficiency service centre could support new businesses. This article is based on a literature review and interviews of persons in paper producing companies and environmental authorities. We also analyse experiences of the first MASCO project in Finland. [Copyright &y& Elsevier]

Highlights: [•] Estimation of GHG emission and energy consumption in wastewater treatment plants. [•] On-site and off-site emissions of carbon dioxide, methane, and nitrous oxide. [•] Higher GHG emission in anaerobic and hybrid plants due to higher CH4 generation. [•] Recovery and use of biogas satisfy the energy demands of treatment systems. [•] Higher off-site than on-site GHG emissions due to the use of fuel and material. [ABSTRACT FROM AUTHOR]

In recent years, the pulp and paper industry has changed a lot and products have been constructed in quite different methods using new technologies. It can be due to the emergence of challenges and constraints such as shortage of raw materials, energy consumption (fossil fuels, electric, etc.), management of the resulting pollutants, environmental issues, ongoing legal requirements and cleaner production strategies. In Iran, the pulp and paper industry's technological development is not keeping pace with global growth. Iran's pulp and paper mills supply a small fraction of domestic market. The reasons can be due to old technologies being used in factories, aging machinery, low productivity of production systems and lack of coordination with modern technologies. It leads to low-quality of paper products and willingness to buy local products. The aim of this study is to select the most appropriate technologies in the pulp section, due to high impact of pulp quality on the quality of final paper. Using a 2-filterd fuzzy decision-making, hierarchical structure of research is designed to assess technological alternatives according to the selected criteria. Findings show that after passing through two filters, Kraft method was chosen as the most appropriate method. The Kraft process has still many advantages like the high quality of the produced pulp and self-sufficiency in energy supply. This framework offers an appropriate procedure for identifying and selecting technologies that has not been used in past researches. Using this framework facilitates using a clear procedure for evaluating and selecting technology and prevents future losses for organizations. [ABSTRACT FROM AUTHOR]

China's paper industry accounts for a larger proportion of the global paper industry and consumes large amounts of energy. Energy conservation and pollution reduction of the industry have become the focus of China's national development strategy. Energy efficiency is an important index which directly determines the amounts of energy consumption and pollution emissions. To understand the energy efficiency evolution of China's paper industry, this paper establishes an input-output data of the paper industry for 29 provinces in China and applies DEA method and econometric models to estimate and comprehensively discuss the energy efficiency issues based on the framework of total factor efficiency. Our results indicate that China's paper industry has a large energy saving potential even though its energy efficiency has improved during the period 1990–2013. The saving potential is about 65% under the meta-frontier and 44% under the group-frontier. Moreover, there are significant differences between different regions in production technology and energy efficiency. The performance of eastern China is better than other regions. But the technology gaps between the different regions are shrinking and converging over time. Finally, some policy recommendations are proposed to improve the energy efficiency of the industry. [ABSTRACT FROM AUTHOR]