Search

The integrated process of ozonation coupled with ceramic membrane filtration has been actively utilized to alleviate membrane fouling in water/wastewater treatment, however, the effect of ozonation on protein-based ceramic membrane fouling is still contradictory. Herein, for the first time, we reported the severe protein-based ceramic membrane fouling at high ozone dosage in the integrated process of ozonation coupled with ceramic membrane filtration and the related fouling mechanism was systematically explored. Ozonation at low dosage slightly mitigated membrane fouling, whereas severe membrane fouling occurred at high ozone dosage (10 mg/L for pre-ozonation; 4 and 10 mg/L for in-situ ozonation). At high ozone dosage, the trans-membrane pressure (TMP) remarkably increased (> 40 kPa) within 90 min and both hydraulically reversible and irreversible fouling contributed to the total membrane fouling resistance. Electro kinetic potential and particle size of the bovine serum albumin (BSA) solution were not the key factors affecting the aggravated membrane fouling at high ozone dosage. The remarkably deteriorated membrane fouling at high ozone dosage can be accounted for the formation of BSA crosslinks ascribed to the oligomerization and agglomeration of BSA and the intermolecular disulfide bridge formation with the crosslinks progressively accumulating on the membrane surface and in the membrane pores during filtration. The modeling results confirmed that the BSA-based membrane fouling mechanism was changed from cake-intermediate to cake-standard with ozonation at high ozone dosage. Meanwhile, the cake layer and/or gel layer played a more important role for the aggravated membrane fouling at high ozone dosage even though the contribution of pore blocking was also significant. [ABSTRACT FROM AUTHOR]

The effect of mixed liquor properties changed by ozonation especially with high dosages on membrane fouling is very complex and remains unclear. In this study, the effect of mixed liquor properties changed by ozonation especially with high dosages on ceramic ultrafiltration (UF) membrane fouling in wastewater treatment and the corresponding mechanism were systematically studied by characterization of the mixed liquor properties, hydraulic performance, the fouling layers and modeling at different ozone dosages (0, 2, 5, 10 mg/L). The membrane filterability of the mixed liquor after pre-ozonation (⩽5 mg/L) was enhanced and the corresponding membrane fouling was mitigated. After pre-ozonation, activated sludge had the better settleability and larger floc size. Meanwhile, there was a remarkable reduction of dissolved organic carbon (DOC), soluble microbial products (SMP) and extractable extra-cellular polymeric substances (EPS) after pre-ozonation and the removed organics were mainly belonged to the high molecular weight (MW) (1–10 kDa) and very high MW (10–200 kDa) substances. Intermediate blocking was the main membrane fouling during the mixed liquor filtration process and the best fouling mitigation performance was achieved for the sample with an intermediate ozone dosage of 5 mg/L (1.7 mg-ozone/g-mixed liquor suspended solids (MLSS)). Meanwhile, the water quality of permeate was even better after pre-ozonation (⩽5 mg/L) with the lower DOC and total nitrogen (TN) concentrations. Severe cell lysis occurred with the significant increase of the released organics in the mixed liquor and the activated sludge had smaller floc size and worse settleability when the pre-ozonation dosage was above 10 mg/L, which in turn resulted in the deteriorated membrane fouling control performance. [ABSTRACT FROM AUTHOR]

[Display omitted] • Ceramic membrane (CM) market is growing with many full-scale applications. • CM is superior to polymeric membrane–high stability & flux, long life, low fouling. • Physicochemical processes (e.g., ozonation) are effective for fouling control. • Catalytic (nano) CMs can enhance antifouling, and pollutant removal capability. • Cost analysis of CMs, fouling control & cleaning should be evaluated at full-scale. Application of ceramic membrane technology in water and wastewater is rapidly growing. Inherent advantages of ceramic membrane including chemical/thermal stability, low fouling propensity and long lifespan make ceramic membrane technology attractive, and the ceramic membrane market is expected to achieve a compound annual growth rate of 12%. Ceramic membranes could be integrated with advanced oxidation processes such as in-situ ozonation that cannot be applied in the case of polymeric membrane due to their potential degradation during long-term exposure. In addition, the hybrid-ceramic membrane processes such as ceramic membrane bioreactor are superior to polymeric counterparts due to higher flux, higher pollutant removal, lower fouling rate and higher cleaning efficiency. Although ceramic membrane has high capital cost, life-cycle costs of ceramic and polymeric plants are comparable. Notably, full-scale ceramic membrane water/wastewater treatment plants have been installed in many countries such as Japan, USA, Singapore and United Kingdom. Given the attractiveness of this technology, performance of ceramic membrane is critically reviewed with a focus on their applications in water and wastewater treatment under mild conditions. In addition, fouling mechanisms and control strategies are elucidated and are compared with polymeric membranes. Importantly, for the first time, the status of full-scale applications and market prospects of ceramic membranes are critically analysed to show their future potential. Lastly, future research directions such as development of cost-effective ceramic membranes, understanding the biofouling evolution and economic evaluation of physicochemical processes for fouling control are proposed. [ABSTRACT FROM AUTHOR]

Soluble extracellular organic matters (EOM) resulting from algal blooms in water sources can cause severe membrane fouling in water treatment. The effect of pre-ozonation on mitigation of ceramic UF membrane fouling caused by EOM released from Microcystis aeruginosa and the associated fouling mitigation mechanism were investigated through the characterization of hydraulic performance, dissolved organic carbon (DOC), fluorescence excitation–emission matrix (EEM) spectra, molecular weight (MW) distribution, hydrophilicity and model fit of five combined fouling models. Pre-ozonation achieved a remarkable effect of hydraulically reversible fouling mitigation as a result of the selective oxidation of the very high MW hydrophobic biopolymers (⩾20 kDa) to lower MW and more hydrophilic compounds. However, pre-ozonation had a very limited effect on mitigation of hydraulically irreversible fouling dominated by the high MW (1–10 kDa) hydrophilic organics. Modeling results indicated that the EOM-related membrane fouling mitigation by pre-ozonation was more likely ascribed to the alleviation of cake layer and standard pore blocking with standard pore blocking playing a more important role. [ABSTRACT FROM AUTHOR]

The presence of seasonal algal blooms with harmful algae-derived organic matters threatens the performance of ultrafiltration in drinking water treatment. The hybrid process of in-situ ozonation with ceramic ultrafiltration membrane was proposed for the treatment of algal-rich water with effective removal of algal cells and mitigation of membrane fouling. The mechanism of membrane fouling mitigation with in-situ ozonation was systematically investigated from the perspective of cake layer, gel layer and membrane pore blocking. The results showed that in-situ ozonation treatment can effectively mitigate membrane fouling. For instance, transmembrane pressure was reduced by 75.8% with in-situ ozonation at 1 mg/L. In-situ ozonation resulted in the formation of a more porous and thinner cake layer due to the disintegration of extracellular organic matters that attached on the algal surface. Besides, the portion of very high molecular weight biopolymers (around 100 kDa) and the hydrophobic fraction of algae-derived organic matters, the main component intercepted by the ceramic membrane, were reduced with in-situ ozonation and thus leaded to less severe gel layer fouling. Furthermore, in-situ ozonation induced the accelerated organics degradation within the ceramic membrane pores, alleviating the membrane pore blocking. [ABSTRACT FROM AUTHOR]

Abstract Ferrous dosing is used to reduce phosphorus concentration and alleviate polymeric membrane fouling in membrane bioreactor (MBR). However, limited studies have been conducted to investigate the impacts of ferrous dosing on ceramic membrane fouling, nutrient removal efficiency and microbial community. Accordingly, the aim of this study was to investigate the effect of intermittent ferrous dosing with Fe/P molar ratios of 2 and 1 (with a dosing frequency of every two days) on the overall nutrient removal, functional microbial changes and membrane fouling in ceramic membrane bioreactors (CMBR) in treatment of wastewater. TP concentration of 10 mg/L in influent decreased to 1.94 ± 0.62 mg/L (control), 0.38 ± 0.22 mg/L (Fe/P = 1) and 0.31 ± 0.18 mg/L (Fe/P = 2) in the effluent, respectively. Meanwhile, the effluent total nitrogen (TN) concentrations with Fe/P = 1 treatment (6.80 ± 2.02 mg/L) and Fe/P = 2 treatment (5.12 ± 2.28 mg/L) were lower than that of the control (7.72 ± 2.36 mg/L). Compared to Fe/P = 1, the TN removal performance was better for Fe/P = 2 mainly due to the increased abundance of denitrifying bacteria (Zoogloea and Acinetobacter). In addition, excess iron dose might have toxic effects on bacterial physiology, however the Fe concentrations that cause cell damage vary for different bacteria. The relative abundance of Zoogloea (aerobic denitrifying bacteria) continuously increased with ferrous addition (Fe/P = 2), while other bacteria including Dechloromonas , Hyphomicrobium and Thauera (anoxic denitrifying bacteria), Nitrospira (nitrifying bacteria) and Candidatus Accumulibacter (phosphorus accumulating organism) decreased sharply. Furthermore, membrane fouling was effectively moderated by ferrous dosing and Fe/P = 1 treatment showed improved membrane fouling mitigation than Fe/P = 2. Overall, intermittent ferrous addition in CMBR with Fe/P molar ratio of 1 was beneficial to the removal of nutrients (TP, TN and organics), enhanced succession of microbial community and membrane fouling mitigation. Graphical abstract Unlabelled Image Highlights • Ferrous dosing (Fe/P = 1) is beneficial to phosphorus and nitrogen removal. • Microbial community of activated sludge is significantly changed by ferrous dosing. • Excess iron dose has toxic effects on bacterial physiology. • The optimal fouling control performance is achieved at Fe/P molar ratio of 1. [ABSTRACT FROM AUTHOR]

Inorganic salts (e.g., FeCl 3 and FeSO 4) are typically added to membrane bioreactor (MBR) for achieving improved total phosphorus (TP) removal and hydraulic performance. However, at the iron dose (e.g., Fe to P molar ratio of 1–4) required for effective TP removal, severe irreversible membrane fouling could become a significant concern. In this context, intermittent in-situ ozonation was provided for the first time directly in the membrane tank of Fe(II)-dosed membrane bioreactor, and its effect on membrane fouling mitigation was assessed and elucidated. The basic effluent quality remained unaffected, indicating that in-situ ozonation had no detrimental effects. In addition, concentration of foulants and the relative abundance of biofilm-forming microbes were comparable in both the Fe-MBR and Fe/O 3 -MBR. Importantly, as compared to the Fe-MBR, a 33% reduction in membrane fouling was achieved in the Fe/O 3 -MBR. The enhanced filterability of mixed liquor and the scrubbing of the membrane surface by ozone with the direct/indirect oxidation of the deposited foulants contributed to membrane fouling mitigation in the Fe/O 3 -MBR. Meanwhile, trans -membrane pressure profiles of MBRs followed cake-intermediate fouling mechanism. This study demonstrates that provision of intermittent in-situ ozonation is a simple and attractive approach to extend the operation of iron-dosed MBR. [Display omitted] • Performance of in-situ ozonation combined with Fe-MBR (Fe/O 3 -MBR) was elucidated. • Abundance of biofilm-forming bacteria was comparable in both Fe- and Fe/O 3 -MBR. • Ozonation improved mixed liquor properties and delayed the onset of severe fouling. • Increased floc size and membrane scrubbing by ozone contributed to fouling control. • Cake-intermediate fouling was the fouling mechanism in both Fe- and Fe/O 3 -MBR. [ABSTRACT FROM AUTHOR]

The combined pretreatment of coagulation and ozonation is extensively adopted for water quality enhancement and membrane fouling reduction in wastewater reclamation. Herein, the integrated treatment of ferrate pretreatment and in-situ ozonation/ceramic membrane filtration on water quality improvement and fouling reduction of ceramic membrane in secondary wastewater effluent treatment was reported for the first time. The results showed that the hybrid treatment of ferrate pretreatment and in-situ ozonation greatly inhibited the generation of N-dimethyl nitrosamine (NDMA) and did not generate bromate. Meanwhile, the best removal efficiencies of low molecular weight (MW) organics (32.3%), humic-like substances (17.8%) and biopolymers (87.5%) in effluent were achieved by the combination of ferrate (0.15 mM) pretreatment and in-situ ozonation (10 mg/L). Moreover, the control sample (without any treatment) had a fouling transmembrane pressure (TMP) of 30.5 kPa after 7.0 h filtration under a constant flux of 90 L/(m2·h) while that was only 1.0 kPa by the hybrid treatment of ferrate (0.15 mM) pretreatment and in-situ ozonation (10 mg/L). Soluble microbial products (SMP)-like substances with high molecular weight (MW) of 20–2000 kDa were the main foulants and intermediate-standard fouling mechanism played a principal role during the membrane filtration process. Statistical analysis showed that dissolved organic carbon (DOC), UV 254 and protein had the greatest positive correlation (above 0.92) to the total fouling resistance, whilst turbidity displayed the greatest negative correlation (around −0.61) to the total fouling resistance. The remarkable fouling alleviation was due to the improved water quality and in-situ cleaning, which were contributed to the coagulation and oxidation by ferrate and in-situ ozonation. Image 1 • Ferrate pretreatment- in-situ ozonation greatly reduces ceramic membrane fouling. • NDMA and bromate are remarkably reduced by ferrate pretreatment- in-situ ozonation. • Intermediate-standard fouling is the main fouling mechanism. • DOC, UV 254 and protein are the most important positive factors to R t. • Fouling alleviation is due to the improved water quality and in-situ cleaning. [ABSTRACT FROM AUTHOR]