Search

The effect of mixed liquor properties changed by ozonation especially with high dosages on membrane fouling is very complex and remains unclear. In this study, the effect of mixed liquor properties changed by ozonation especially with high dosages on ceramic ultrafiltration (UF) membrane fouling in wastewater treatment and the corresponding mechanism were systematically studied by characterization of the mixed liquor properties, hydraulic performance, the fouling layers and modeling at different ozone dosages (0, 2, 5, 10 mg/L). The membrane filterability of the mixed liquor after pre-ozonation (⩽5 mg/L) was enhanced and the corresponding membrane fouling was mitigated. After pre-ozonation, activated sludge had the better settleability and larger floc size. Meanwhile, there was a remarkable reduction of dissolved organic carbon (DOC), soluble microbial products (SMP) and extractable extra-cellular polymeric substances (EPS) after pre-ozonation and the removed organics were mainly belonged to the high molecular weight (MW) (1–10 kDa) and very high MW (10–200 kDa) substances. Intermediate blocking was the main membrane fouling during the mixed liquor filtration process and the best fouling mitigation performance was achieved for the sample with an intermediate ozone dosage of 5 mg/L (1.7 mg-ozone/g-mixed liquor suspended solids (MLSS)). Meanwhile, the water quality of permeate was even better after pre-ozonation (⩽5 mg/L) with the lower DOC and total nitrogen (TN) concentrations. Severe cell lysis occurred with the significant increase of the released organics in the mixed liquor and the activated sludge had smaller floc size and worse settleability when the pre-ozonation dosage was above 10 mg/L, which in turn resulted in the deteriorated membrane fouling control performance. [ABSTRACT FROM AUTHOR]

[Display omitted] • Ceramic membrane (CM) market is growing with many full-scale applications. • CM is superior to polymeric membrane–high stability & flux, long life, low fouling. • Physicochemical processes (e.g., ozonation) are effective for fouling control. • Catalytic (nano) CMs can enhance antifouling, and pollutant removal capability. • Cost analysis of CMs, fouling control & cleaning should be evaluated at full-scale. Application of ceramic membrane technology in water and wastewater is rapidly growing. Inherent advantages of ceramic membrane including chemical/thermal stability, low fouling propensity and long lifespan make ceramic membrane technology attractive, and the ceramic membrane market is expected to achieve a compound annual growth rate of 12%. Ceramic membranes could be integrated with advanced oxidation processes such as in-situ ozonation that cannot be applied in the case of polymeric membrane due to their potential degradation during long-term exposure. In addition, the hybrid-ceramic membrane processes such as ceramic membrane bioreactor are superior to polymeric counterparts due to higher flux, higher pollutant removal, lower fouling rate and higher cleaning efficiency. Although ceramic membrane has high capital cost, life-cycle costs of ceramic and polymeric plants are comparable. Notably, full-scale ceramic membrane water/wastewater treatment plants have been installed in many countries such as Japan, USA, Singapore and United Kingdom. Given the attractiveness of this technology, performance of ceramic membrane is critically reviewed with a focus on their applications in water and wastewater treatment under mild conditions. In addition, fouling mechanisms and control strategies are elucidated and are compared with polymeric membranes. Importantly, for the first time, the status of full-scale applications and market prospects of ceramic membranes are critically analysed to show their future potential. Lastly, future research directions such as development of cost-effective ceramic membranes, understanding the biofouling evolution and economic evaluation of physicochemical processes for fouling control are proposed. [ABSTRACT FROM AUTHOR]

Inorganic salts (e.g., FeCl 3 and FeSO 4) are typically added to membrane bioreactor (MBR) for achieving improved total phosphorus (TP) removal and hydraulic performance. However, at the iron dose (e.g., Fe to P molar ratio of 1–4) required for effective TP removal, severe irreversible membrane fouling could become a significant concern. In this context, intermittent in-situ ozonation was provided for the first time directly in the membrane tank of Fe(II)-dosed membrane bioreactor, and its effect on membrane fouling mitigation was assessed and elucidated. The basic effluent quality remained unaffected, indicating that in-situ ozonation had no detrimental effects. In addition, concentration of foulants and the relative abundance of biofilm-forming microbes were comparable in both the Fe-MBR and Fe/O 3 -MBR. Importantly, as compared to the Fe-MBR, a 33% reduction in membrane fouling was achieved in the Fe/O 3 -MBR. The enhanced filterability of mixed liquor and the scrubbing of the membrane surface by ozone with the direct/indirect oxidation of the deposited foulants contributed to membrane fouling mitigation in the Fe/O 3 -MBR. Meanwhile, trans -membrane pressure profiles of MBRs followed cake-intermediate fouling mechanism. This study demonstrates that provision of intermittent in-situ ozonation is a simple and attractive approach to extend the operation of iron-dosed MBR. [Display omitted] • Performance of in-situ ozonation combined with Fe-MBR (Fe/O 3 -MBR) was elucidated. • Abundance of biofilm-forming bacteria was comparable in both Fe- and Fe/O 3 -MBR. • Ozonation improved mixed liquor properties and delayed the onset of severe fouling. • Increased floc size and membrane scrubbing by ozone contributed to fouling control. • Cake-intermediate fouling was the fouling mechanism in both Fe- and Fe/O 3 -MBR. [ABSTRACT FROM AUTHOR]

The combined pretreatment of coagulation and ozonation is extensively adopted for water quality enhancement and membrane fouling reduction in wastewater reclamation. Herein, the integrated treatment of ferrate pretreatment and in-situ ozonation/ceramic membrane filtration on water quality improvement and fouling reduction of ceramic membrane in secondary wastewater effluent treatment was reported for the first time. The results showed that the hybrid treatment of ferrate pretreatment and in-situ ozonation greatly inhibited the generation of N-dimethyl nitrosamine (NDMA) and did not generate bromate. Meanwhile, the best removal efficiencies of low molecular weight (MW) organics (32.3%), humic-like substances (17.8%) and biopolymers (87.5%) in effluent were achieved by the combination of ferrate (0.15 mM) pretreatment and in-situ ozonation (10 mg/L). Moreover, the control sample (without any treatment) had a fouling transmembrane pressure (TMP) of 30.5 kPa after 7.0 h filtration under a constant flux of 90 L/(m2·h) while that was only 1.0 kPa by the hybrid treatment of ferrate (0.15 mM) pretreatment and in-situ ozonation (10 mg/L). Soluble microbial products (SMP)-like substances with high molecular weight (MW) of 20–2000 kDa were the main foulants and intermediate-standard fouling mechanism played a principal role during the membrane filtration process. Statistical analysis showed that dissolved organic carbon (DOC), UV 254 and protein had the greatest positive correlation (above 0.92) to the total fouling resistance, whilst turbidity displayed the greatest negative correlation (around −0.61) to the total fouling resistance. The remarkable fouling alleviation was due to the improved water quality and in-situ cleaning, which were contributed to the coagulation and oxidation by ferrate and in-situ ozonation. Image 1 • Ferrate pretreatment- in-situ ozonation greatly reduces ceramic membrane fouling. • NDMA and bromate are remarkably reduced by ferrate pretreatment- in-situ ozonation. • Intermediate-standard fouling is the main fouling mechanism. • DOC, UV 254 and protein are the most important positive factors to R t. • Fouling alleviation is due to the improved water quality and in-situ cleaning. [ABSTRACT FROM AUTHOR]