Search

Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) infection has become pandemic, reaching almost one million death worldwide. At present standard treatment for coronavirus disease 2019 (COVID-19) is not well defined because the evidence, either from randomized or observational studies, with conflicting results, has led to rapid changes in treatment guidelines. Our aim was to narratively summarize the available literature on the management of COVID-19 in order to combine current evidence and interpretation of the data by experts who are treating patients in the frontline setting. The panel conducted a detailed review of the literature and eventual press releases from randomized clinical trials for each possible available treatment. Inductive PubMed search waws performed for publications relevant to the topic, including all clinical trials conducted. The result was a flowchart with treatment indications for patients with COVID-19. After 6 months of a pandemic situation and before a possible second coronavirus wave descends on Europe, it is important to evaluate which drugs proved to be effective while also considering that results from many randomized clinical trials are still awaited. Indeed, among treatments for COVID-19, only glucocorticoids have resulted in an association with a significant decrease in mortality in published randomized controlled trials. New therapeutic strategies are urgently needed. [ABSTRACT FROM AUTHOR]

Paper-based materials, due to their availability, environmental benefits and high thermal properties, have already been implemented in several building envelope designs. However, most of them either did not optimise the use of the material or did not provide sufficient thermal insulation for use in permanent buildings. The presented research analyses six original paper-based building envelope core proposals, suitable for use in permanent buildings in temperate climate of Europe, in terms of thermal and environmental efficiency. Proposals include cores with embedded paper tubes structural elements, timber-cardboard studs and sandwich designs. The heat transfer coefficient of the envelopes was obtained for repeatable modules via 2D computer simulations (ThermCAD software), and the environmental impact was assessed for a representative square metre of the envelope via LCA analysis, based in ecoinvent 3.8 database. All analysed designs showed high thermal insulation properties and met the requirements for U max = 0.20 W/m2K, did not cause the risk of surface condensation, nor have excessive thermal bridges. The analysed building envelope designs based on embedded frame wall structure showed environmental superiority over conventional envelopes (timber frame and SIP panels). The research may serve as a proof of concept, for using paper-based building envelopes in sustainable architecture. [ABSTRACT FROM AUTHOR]

The number of cancer patients in Europe is rising and significant advances in basic and applied cancer research are making the provision of optimal care more challenging. The concept of cancer as a systemic, highly heterogeneous and complex disease has increased the awareness that quality cancer care should be provided by a multidisciplinary team (MDT) of highly qualified healthcare professionals. Cancer patients also have the right to benefit from medical progress by receiving optimal treatment from adequately trained and highly skilled medical professionals. Built on the highest standards of professional training and continuing medical education, medical oncology is recognised as an independent medical specialty in many European countries. Medical oncology is a core member of the MDT and offers cancer patients a comprehensive and systemic approach to treatment and care, while ensuring evidence-based, safe and cost-effective use of cancer drugs and preserving the quality of life of cancer patients through the entire ‘cancer journey’. Medical oncologists are also engaged in clinical and translational research to promote innovation and new therapies and they contribute to cancer diagnosis, prevention and research, making a difference for patients in a dynamic, stimulating professional environment. Medical oncologists play an important role in shaping the future of healthcare through innovation and are also actively involved at the political level to ensure a maximum contribution of the profession to Society and to tackle future challenges. This position paper summarises the multifarious and vital contributions of medical oncology and medical oncologists to today's and tomorrow's professional cancer care. [ABSTRACT FROM AUTHOR]

The forest sector is vital in Europe, providing economic and social benefits to communities. However, this sector is also responsible for some environmental impacts, and it is crucial to ensure that these impacts do not outweigh the benefits described. For this reason, this paper proposes an environmental and economic assessment of three forest wood products – uncoated woodfree paper, natural cork stoppers, and particle boards. The life cycles of these products were modeled using foreground data and a life cycle assessment was conducted to determine the environmental impacts associated with these three life cycles. For the economic assessment, the net present value method was adopted. From the results, it is possible to conclude that the utilization of 1 ha of forest land for 100 years to plant Eucalyptus globulus used in the production of uncoated woodfree paper generates the least environmental impact per euro. A sensitivity analysis was conducted to determine the reliability of the results achieved given the uncertainty associated with the data used to model the three life cycles. The same critical impact categories and the same critical life cycle stage (raw materials' extraction) were identified for the three systems under study. Given these similarities, an effort must be made by the forest sector to reduce the impacts of these categories and this life cycle stage. To assist on this task, a set of generic and industry-specific recommendations is provided for companies operating in the forest sector. • An environmental and economic assessment of three forest wood products is performed. • The life cycle assessment methodology and the net present value method are used. • The production of uncoated woodfree paper generates the least environmental impact per euro of NPV. • Using sensitivity analysis, the results were found to be reliable. • Recommendations for different stakeholders in the forest sector are provided. [ABSTRACT FROM AUTHOR]

The paper by ESMO “The current and future role of the medical oncologist in the professional care for cancer patients: a position paper by the European Society for Medical Oncology (ESMO)” conveys some important key messages for the whole oncology community. A working group (WG) involving 21 oncology and related societies would like to comment on the ESMO position paper from a multidisciplinary perspective. The letter focuses on the concept of multidisciplinarity and how collaboration is the ideal situation for the best care of patients: the guidance to the patient must be given in accordance with agreements based on the outcome of discussions within the multidisciplinary team. The commentary therefore wants to highlight those statements that the working group shares and supports, identifying the common ground from where to start a constructive dialogue. [ABSTRACT FROM AUTHOR]

The population is ageing rapidly worldwide, which is particularly apparent in Europe. Therefore, there is a shrinking working-age population per retiree, which has profound implications for society. In response to this challenge, the EU-funded project OSIRIS is developing a collaborative digital platform that allows the creation of new innovative solutions to tackle the ageing population's challenges and help them live independent and active life. Effective project management is crucial for the success of such a project. In this paper, we describe the project management structure of the OSIRIS project, analyze the project management plan, identify gaps and provide recommendations to improve the project management practices. The paper highlights the lessons learned from the perspective of project management methodologies, enterprise architecture management and from creating generalized customer journeys for such a platform. Our findings suggest that effective project management practices, including proper planning, risk management, communication and stakeholder engagement, are imperative for the projects' success. Overall, by sharing our experience and insights, this paper aims to provide valuable guidance for future research and development projects in the silver economy and technology field. [ABSTRACT FROM AUTHOR]

The participation of women in sports and the management of women's sports teams have gained significant attention in recent years, underscoring the need to understand the dynamics and organizational aspects of women's sports. However, there is a noticeable lack of comprehensive bibliometric analyses in this domain, hindering a thorough exploration of the existing literature and the identification of key trends and knowledge gaps. This study aims to address this gap by conducting a rigorous bibliometric analysis of sports management competencies in women's semi-professional teams in Europe. Using the VOSviewer software, advanced data analysis techniques, including citation and co-citation analysis, were employed to gain insights into the research landscape, influential authors, seminal papers, and key research trends. The results of the analysis revealed clusters of research topics related to women's semi-professional sports, including performance, gender, football, and sports. The findings of this analysis will contribute to the advancement and success of women's semi-professional teams by informing the development of tailored training programs, educational curricula, and professional initiatives for sports management roles. Ultimately, this study aims to enhance the understanding of sports management competencies in women's semi-professional teams and guide future research endeavors in this area. [ABSTRACT FROM AUTHOR]

The railway sector is an important part of the transportation industry as well as of the economic activity in Europe. It is interesting that digitalization of this sector has been triggered in several European countries by regulatory compliance obligations. The Technical Specification for Interoperability relating to Telematics Applications for Freight/Passenger Services as well as other related standards have created opportunities for the digital transformation of the players participating into this market. Apart from achieving a base minimum compliance to the standards, there are prerequisites and questions to be answered at organizational and technological level if railway sector players are to embark on the digital transformation journey. This research study provides explanations on the argument the regulatory compliance may act as a driver for digital transformation, using the example of the railway sector in Europe and presents some important prerequisites for this market's players to take the opportunity for digital transformation. The ultimate goal of this research, whose foundations are set up in this research paper, is to formulate a digital maturity model for the actor of the railway sector, for the benefit of their retail and business clients. [ABSTRACT FROM AUTHOR]

Pseudomonas aeruginosa , a ubiquitous opportunistic pathogen considered one of the paradigms of antimicrobial resistance, is among the main causes of hospital-acquired and chronic infections associated with significant morbidity and mortality. This growing threat results from the extraordinary capacity of P. aeruginosa to develop antimicrobial resistance through chromosomal mutations, the increasing prevalence of transferable resistance determinants (such as the carbapenemases and the extended-spectrum β-lactamases), and the global expansion of epidemic lineages. The general objective of this initiative is to provide a comprehensive update of P. aeruginosa resistance mechanisms, especially for the extensively drug-resistant (XDR)/difficult-to-treat resistance (DTR) international high-risk epidemic lineages, and how the recently approved β-lactams and β-lactam/β-lactamase inhibitor combinations may affect resistance mechanisms and the definition of susceptibility profiles. To address this challenge, the European Study Group for Antimicrobial Resistance Surveillance (ESGARS) from the European Society of Clinical Microbiology and Infectious Diseases launched the 'Improving Surveillance of Antibiotic-Resistant Pseudomonas aeruginosa in Europe (ISARPAE)' initiative in 2022, supported by the Joint programming initiative on antimicrobial resistance network call and included a panel of over 40 researchers from 18 European Countries. Thus, a ESGARS-ISARPAE position paper was designed and the final version agreed after four rounds of revision and discussion by all panel members. To provide an update on (a) the emerging resistance mechanisms to classical and novel anti-pseudomonal agents, with a particular focus on β-lactams, (b) the susceptibility profiles associated with the most relevant β-lactam resistance mechanisms, (c) the impact of the novel agents and resistance mechanisms on the definitions of resistance profiles, and (d) the globally expanding XDR/DTR high-risk lineages and their association with transferable resistance mechanisms. The evidence presented herein can be used for coordinated epidemiological surveillance and decision making at the European and global level. [ABSTRACT FROM AUTHOR]

Fusion for Energy (F4E), the European Domestic Agency for ITER, is responsible for the procurement of the divertor inner vertical target (IVT) and the cassette body (CB). Both IVT and CB have been supported by extensive Research and Development (R&D) work programmes, implemented over more than 15 years in Europe, to validate design, develop various fabrication technologies, assess thermo-mechanical and thermohydraulics performances and RH installation and maintainability. This paper presents the work performed and the technical challenges associated to the fabrication of the CB prototypes, the results of the prototype qualification as well as the lessons learned. [ABSTRACT FROM AUTHOR]

The Baltic Dry Index (BDI) is an essential index to measure international dry bulk shipping freight, which can reflect global economic changes to a certain extent. Accurate forecasting of BDI supports shipping market participants in grasping risks and making scientific decisions. Based on the Prophet model, this paper considers the impact of multi-dimensional significant events related to the shipping industry and conducts BDI forecasting research. Firstly, we simulate the most momentous events in the world in recent years, namely the 2008 Global Financial Crisis and the 2019 New Crown Epidemic, and utilize the Prophet model to decompose the BDI sequence into three parts: trend, seasonality, and momentous event shocks. Secondly, we extensively collect other multi-dimensional significant event uncertainty indexes to establish a "significant event database". The Maximal Information Coefficient and Boruta methods were employed to extract the uncertainty index particularly correlated with BDI as an exogenous variable for forecasting. Then, we employ the K-Shape method to cluster exogenous variables and explore the combined sense of clustering. Finally, we utilize the Prophet model to forecast BDI in stages. It discusses the influence of exogenous variables and their cluster combinations on the forecasting effect individually and sequentially. Empirical results show that considering the two momentous events of the Financial Crisis and COVID-19 can remarkably improve the accuracy of BDI forecasting. In addition, the study of exogenous variable significance found that during the Financial Crisis, economic policy uncertainty in Europe and the Americas greatly impacted BDI forecasting. During COVID-19, global and developed economic policy uncertainty was noteworthy in the BDI forecasting. The comparative experimental results show the Prophet model has an exemplary forecasting result and strong robustness. It also performs excellently in model generalization and interpretability. This paper proposes a reliable and advanced algorithm for shipping freight rate index forecasting, which has noteworthy reference value for shipping market participants to make investment decisions and risk avoidance. [ABSTRACT FROM AUTHOR]

The development and production of cell gene and tissue (CGT)-based therapies requires a specialized workforce. Entering the CGT arena is complex because it involves different scientific and biomedical aspects (e.g., immunology, stem cell biology and transplantation), as well as knowledge of regulatory affairs and compliance with pharmaceutical quality standards. Currently, both industry and academia are facing a worldwide workforce shortage, whereas only a handful of educational and training initiatives specifically address the peculiarities of CGT product development, the procurement of substances of human origin, the manufacturing process itself and clinical monitoring and biovigilance. The training offered by traditional Master's and PhD programs is not suited for training a skilled workforce ready to enter the increasingly fast-growing CGT field. Indeed, typically these programs are of long duration and only partially cover the required competencies, whereas the demand for a specialized workforce relentlessly increases. In this paper, we (i) present and discuss our understanding of the roots of current growth acceleration of the CGT field; (ii) anticipate future workforce needs due to the expected increase of marketed CGT-based therapies and (iii) evaluate potential solutions that seek to adapt, develop and implement current educational and training initiatives. Importantly for these solutions, we call for scientific societies, such as the International Society for Cell & Gene Therapy, to play a more active role and act as catalysers for new initiatives, building bridges between academia and Industry to establish effective educational and training programs that will engage and prepare a new generation of qualified professionals for entry into the CGT field. [ABSTRACT FROM AUTHOR]

This paper discloses an innovative methodology for the generation and update of technology roadmaps to support strategic decisions for future hypersonic transportation systems, specifically targeting non-profit oriented R&D. The methodology is fully integrated into up-to-date conceptual design activity flows. It consists of five main steps that through mathematical and logical models moves from stakeholders' analysis up to planning definition and results evaluation. Complementary to the traditional experts-based methodologies, the rational process here presented allows for a well-structured logical definition of activities and/or missions required to enhance the readiness level of technologies, including a more accurate and reliable budget and time resources estimation to support the technology development plan. This methodology is exploited in the framework of the H2020 STRATOFLY Project to assess the potential of hypersonic civil vehicles to reach Technology Readiness Level 6 by 2035 with respect to key technological, societal and economical aspects. The paper discloses a unique assessment of the readiness level of the European air-breathing propulsive technologies. The final results confirm the crucial role of air-breathing propulsive technologies in the development of future hypersonic transportation system and highlight the urgent need to invest in in-flight demonstration missions with increasing functionalities, to target 2050 as entry in to service of the first Mach 8 civil transport. • Innovative Technology Roadmap Methodology for Hypersonic Transportation Systems. • Accurate time and budget resources estimation for each TRL transit. • Guidelines for the definition of activities, demonstrative missions or in-flight missions. • Technology Assessment of air-breathing propulsive technologies in Europe. • High-speed air-breathing technologies: TRL6 by 2035 and TRL9 by 2050 are confirmed. [ABSTRACT FROM AUTHOR]

Over the past few years, energy communities initiatives have gained traction in Europe as a means to achieve energy transition goals, allowing citizen involvement in energy production, consumption, and distribution. Following the 2018 European directive RED II, these projects have rapidly increased across the continent, showcasing their potential for creating sustainable local energy systems. While studies highlight economic, environmental, and social benefits, barriers such as regulatory challenges, finance access, and low public awareness remain. This paper presents the results of a systematic literature review that explores the state-of-the-art of the academic research on energy communities. The study adopts a systematic approach to examine the body of literature on the topic to provide a comprehensive analysis of the phenomenon on the basis of rigorous and replicable research criteria. The reviewed material consists of 140 articles collected through the Scopus database, evaluated using specific structural dimensions to group the literature into analytical categories. The analysis of scientific papers published between 2018 and 2022 shows a growing attention towards Renewable Energy Communities, particularly those based on solar energy for electricity production, often combined with storage systems and heat pumps, whereas attention towards energy communities based on thermal energy production is still limited. Furthermore, most scholars focused on analysing specific territorial contexts; comparisons between different regions allows to highlight common features and elements characterizing each model. It emerged that the development of energy communities depends mainly on regulatory, financial, and managerial barriers that require an adequate institutional and legal framework capable of promoting their diffusion. Most studies address the topic from an economic perspective, often in association with incentivizing community models. However, a social perspective should be included by introducing the concept of energy sharing and methodologies for its distribution among all members of the community. The scientific community is called upon to continue investigating and supporting the development of community energy initiatives by providing evidence-based recommendations to policymakers, industry stakeholders, and local communities. This can help to overcome existing barriers and facilitate the diffusion of energy communities models, contributing to the achievement of sustainable and inclusive energy transition goals. • Systematic literature review exploring academic research on energy communities in Europe. • Structural dimensions and related analytical categories as framework to review 140 journal articles. • Most studies concern ECs based on renewable energy sources, with solar power being the predominant source. • Most employed technologies are related to the production of electricity from photovoltaic with batteries and heat pumps. • Most studied focus on Renewable Energy Community, while Citizens Energy Community are less considered in academic studies. [ABSTRACT FROM AUTHOR]

• A novel approach for regional ionosphere grid model with high spatial-temporal resolution is suggested. • The results of the new model is analyzed at different disturb geomagnetic and solar conditions. • A comparative analysis between the results of new model, GIM, NeQuick and GPS-TEC is made. In this paper, a novel approach based on C1 finite element (FE) interpolation is used to construct a regional ionospheric grid model (RIGM) with high spatio-temporal resolution over Europe. The spatial resolution of the new model is 0.50 for a longitude and latitude and a temporal resolution is 15 min. Observations of 38 GPS stations at different days and seasons with different geomagnetic and solar activity conditions are used to evaluate the new method. All stations are used to discretize the whole domain of the problem into separate triangular patches using a Delaunay triangulation algorithm. In this case, GPS stations would be the vertices of the triangular patches. Also, the position of stations in sun-fixed coordinate system with coordinates of latitude and longitude are chosen in order to consider the temporal variations of vertical total electron content (VTEC). To model the behavior of VTEC in each triangular patch, a particular shape function is defined which is fitted to VTEC values at three vertices of each triangle while it satisfies C1 continuity of VTEC at the common edges of the adjacent triangles. The results of the new model are compared with the VTEC of GPS at 4 control stations as well as global ionosphere map (GIM) and NeQuick models. Statistical parameters, including correlation coefficient, root mean square error (RMSE), standard deviation and dVTEC = |VTEC GPS - VTEC model | have been used to evaluate the error of the models. In low geomagnetic activity (KP < 4), the average RMSE at 4 control stations for FE, GIM and NeQuick models are 0.89, 1.05 and 6.42 TECU, respectively, while in the high geomagnetic activity (KP > 4), they are 1.24, 1.68 and 7.62 TECU, respectively. For further analysis, the accuracy of three models in precise point positioning (PPP) has been also evaluated. In PPP method, there is an improvement of about 1–16 mm compared to GIM and NeQuick models at coordinate components of control stations in high geomagnetic activity. The results of the analysis performed in this paper show that the FE model has a very high capability and accuracy in regional VTEC modeling in high and low geomagnetic conditions. The regional accuracy of this model is higher than GIM and NeQuick models and therefore can be considered as a new model for the ionosphere. [ABSTRACT FROM AUTHOR]

This paper presents a systematic literature review on both the risks affecting wood supply security and risk mitigation strategies by quantitative and qualitative data analysis. It describes wood-specific supply chain risks, thereupon resulting impacts and counteracting strategies to ensure supply. Risks, impacts, and strategies are documented as basis for a comparative analysis, discussion of results, challenges and research gaps. Finally, the suitability and the limitations of the chosen methodology and the achieved results are discussed. Scanning wood supply chain risks and supply strategies, most of the reviewed papers focus on wood supply for bioenergy generation and only a few studies investigate wood supply chain risk issues for the sawing, wood panel, pulp and paper industries, or biorefineries. This review differs significantly from other reviews in this field as it considers the entire wood value chain including recent studies on new chemical wood-based products and thus provides a more complete picture of the wood-based bioeconomy. Consequently, it contributes to the literature by providing an overarching investigation of the risks affecting wood supply security and possible side effects of a growing wood-based bioeconomy. It was found that comprehensive value chain analyses considering established wood products, large-volume bioenergy products, as well as established and new chemical wood-based products in the context of wood supply security are missing. Studies that map the entire wood value chain with its multilevel interdependences and integrating cascading use of wood are lacking. • Most studies focus on fuelwood supply chain risks affecting bioenergy generation. • Regulations stimulated studies on bioenergy feedstock supply strategies. • Europe especially shows a research topic in securing bioenergy production. • Supply security analyses in the context of the wood supply chain are rare. • Comprehensive analyses of the entire wood value chain are missing. [ABSTRACT FROM AUTHOR]

The ionospheric error affects the accuracy of the Global Navigation Satellite Systems observation and precise orbit determination. Usually, only the first order ionospheric error is considered, which can be eliminated by the ionospheric-free linear combination observation. But the remaining higher order ionospheric error will affect the accuracy of observations and their applications. In this paper, the influence of the higher order ionospheric error have been studied by using the International Geomagnetic Reference Field 13 and the Global Ionosphere Maps model produced by the Center for Orbit Determination in Europe. Focus on ionospheric error, the experiment of paper at doy 302 in 2019, which show that the second order ionospheric error impacting BeiDou Navigation Satellite System (BDS) B1I and B3I observation is 6.3569 mm and 11.8484 mm, respectively. Whereas, the third order ionospheric error impacting BDS B1I and B3I observation is 0.1734 mm and 0.3977 mm, respectively. Due to the current measurement accuracy of BDS carrier-phase observation can reach 2 mm, the influence of high order ionospheric error on observation should be considered. For BDS precise orbit determination, the orbit overlapping results are indicated that its orbit accuracy can be improved approximately 5 mm with the higher order ionospheric error correction, which is also in agreement with the results of Satellite Laser Ranging in this work. [ABSTRACT FROM AUTHOR]

[Display omitted] Applications emitting radiofrequency electromagnetic fields (RF-EMF; 100 kHz to 300 GHz) are widely used for communication (e.g. mobile phones), in medicine (diathermy) and in industry (RF heaters). The objective is to systematically review the effects of longer-term or repeated local and whole human body radiofrequency electromagnetic field (RF-EMF) exposure on the occurrence of symptoms. Primary hypotheses were tinnitus, migraine and headaches in relation to RF-EMF exposure of the brain, sleep disturbances and composite symptom scores in relation to whole-body RF-EMF exposure. Eligibility criteria: We included case-control and prospective cohort studies in the general population or workers estimating local or whole-body RF-EMF exposure for at least one week. Information sources: We conducted a systematic literature search in various databases including Web of Science and Medline. Risk of bias: We used the Risk of Bias (RoB) tool developed by OHAT adapted to the topic of this review. Synthesis of results: We synthesized studies using random effects meta -analysis. Included studies: We included 13 papers from eight distinct cohort and one case-control studies with a total of 486,558 participants conducted exclusively in Europe. Tinnitus is addressed in three papers, migraine in one, headaches in six, sleep disturbances in five, and composite symptom scores in five papers. Only one study addressed occupational exposure. Synthesis of results: For all five priority hypotheses, available research suggests that RF-EMF exposure below guideline values does not cause symptoms, but the evidence is very uncertain. The very low certainty evidence is due the low number of studies, possible risk of bias in some studies, inconsistencies, indirectness, and imprecision. In terms of non-priority hypotheses numerous exposure-outcome combinations were addressed in the 13 eligible papers without indication for an association related to a specific symptom or exposure source. Limitations of evidence: This review topic includes various challenges related to confounding control and exposure assessment. Many of these aspects are inherently present and not easy to be solved in future research. Since near-field exposure from wireless communication devices is related to lifestyle, a particular challenge is to differentiate between potential biophysical effects and other potential effects from extensive use of wireless communication devices that may compete with healthy behaviour such as sleeping or physical activity. Future research needs novel and innovative methods to differentiate between these two hypothetical mechanisms. Interpretation: This is currently the best available evidence to underpin safety of RF-EMF. There is no indication that RF-EMF below guideline values causes symptoms. However, inherent limitations of the research results in substantial uncertainty. Funding: This review was partially funded by the WHO radioprotection programme. Registration: The protocol for this review has been registered in Prospero (reg no CRD42021239432) and published in Environment International (Röösli et al., 2021) [ABSTRACT FROM AUTHOR]

When we talk about Space, our interlocutors think about planets, stars, asteroids, astronauts and, sometimes satellites. But, only a small percentage is aware of what satellite technology can do and the relevance of satellite applications in our everyday life. From satellite communication, to navigation and to earth imagery, satellites data and technology are contributing in improving our daily life, or businesses or helping the management of our cities. Often, the end users come across an obstacle in communicating their needs to the service providers. On the other side, the service providers themselves are not fully aware how to communicate with the end-users. In some cases, this lack of communication makes difficult to meet the demand of space applications from the user side with the supply from the service providers. Eurisy, an association of space agencies established thirty years ago, works to put the end users at the core of the space value chain. In this last decades, Eurisy has been attentive and responsive to the changes of the space sector trying to picture how end users are becoming familiar with space technology. In particular, how the democratisation of space is turning space, especially satellite technology, into an enabler to guarantee the development of a sustainable living, accessible to everyone. Eurisy recently started a review of the case studies collected over the last ten years thanks to direct testimonials, event and conferences, publications and surveys. The user-centred approach adopted is innovative in the space sector and over the years proved to be effective in connecting users and service providers in different contexts. The paper aims at: 1- Identifying challenges and barriers that characterise the relations between service and/or information providers and end users. 2- Analysing the changes occurred in the relations between end users and service providers from 2007 to date in Europe. 3- Presenting the reasons that motivates the use of satellite data and technologies and which of these is the most used. 4- Presenting Eurisy's approach as an applicable model outside the European borders and the benefits deriving from connecting space and society. Furthermore, the paper will briefly present the ongoing activities as examples of the work put in place by the organisation and how the user-centred approach is applied. • The so-called democratisation of space has consequences on the downstream sector. • End users are mostly local and regional public authorities. • Central Europe seems to be the most fertile area where to find use cases. • The main technology adopted is Satellite Navigation. SatComs are not common. • Eurisy works putting the end-users central in the space value chain. [ABSTRACT FROM AUTHOR]

Bovine viral diarrhea virus (BVDV) is endemic in many parts of the world, and multiple countries have implemented surveillance activities for disease control or eradication. In such control programs, the disease-free status can be compromised by factors that pose risks for introduction or persistence of the virus. The aim of the present study was to gain a comprehensive overview of possible risk factors for BVDV infection in cattle herds in Europe and to assess their importance. Papers that considered risk factors for BVDV infection in cattle were identified through a systematic search. Further selection of papers eligible for quantitative analysis was performed using a predefined checklist, including (1) appropriate region (i.e., studies performed in Europe), (2) representativeness of the study population, (3) quality of statistical analysis, and (4) availability of sufficient quantitative data. In total, 18 observational studies were selected. Data were analyzed by a random-effects meta-analysis to obtain pooled estimates of the odds of BVDV infection. Meta-analyses were performed on 6 risk factors: herd type, herd size, participation in shows or markets, introduction of cattle, grazing, and contact with other cattle herds on pasture. Significant higher odds were found for dairy herds (odds ratio, OR = 1.63, 95% confidence interval, CI: 1.06–2.50) compared with beef herds, for larger herds (OR = 1.04 for every 10 extra animals in the herd, 95% CI: 1.02–1.06), for herds that participate in shows or markets (OR = 1.45, 95% CI: 1.10–1.91), for herds that introduced cattle into the herd (OR = 1.41, 95% CI: 1.18–1.69), and for herds that share pasture or have direct contact with cattle of other herds at pasture (OR = 1.32, 95% CI: 1.07–1.63). These pooled values must be interpreted with care, as there was a high level of heterogeneity between studies. However, they do give an indication of the importance of the most frequently studied risk factors and can therefore assist in the development, evaluation, and optimization of BVDV control programs. [ABSTRACT FROM AUTHOR]

• Seven categories of social impacts were identified in the literature review. • Most important negative impacts are on human rights and social equity. • Most important positive impacts are on wellbeing and livelihoods. • There is need to increase subjective assessment of impacts in protected areas. • Coordination of policies across sectors is needed to meet future biodiversity targets. Effective designation of Protected Areas (PAs) requires the careful consideration of their social impacts as these are perceived by people. These refer to a variety of issues such as the distribution of power, social equity, social relations and more importantly the impact of PAs on human wellbeing. A number of studies have emerged in the past decade aiming to capture social impacts of PAs across the world through non-monetary assessments taking into consideration people's perceptions. Although Europe is the region with the largest in proportion number of Protected Areas across the world it is also a region with very limited scientific evidence on this topic. As the European Union is preparing to implement its new Biodiversity Strategyto ipkmplement this paper aims to provide the first comprehensive review of the literature regarding social impacts of European PAs and highlight new directions for current policy frameworks in the region. The paper focuses on the perceived non-economic social costs and benefits of PAs and identifies 7 key categories of social impacts. We propose that policy planning for biodiversity conservation in Europe should incorporate subjective assessments of social costs and benefits with the aim to achieve an increase of benefits for people and their equal distribution across social groups. [ABSTRACT FROM AUTHOR]

The shift from centralized to decentralized energy, with the development of renewable energies, is giving rise to new energy models. Some of these models aim to increase the citizens participation in the energy transition, such as the energy communities. This concept has recently emerged in Europe to encourage the development of local projects and raising citizens' awareness. Our aim is to better understand how such communities emerge to foster them, and to propose a tool for B2T (Business to Territory) Business Developers. We have developed a generic methodology to follow the formation of sociotechnical systems based on a modeling of the Actor-Network Theory. We use the concept of Socio-Energetic Node and propose a model of it to apply our generic methodology to Local Energy Communities. Preliminary results are presented at the end of this paper on a case study. [ABSTRACT FROM AUTHOR]

Intermittent rivers, which do not flow all year round, have biophysical functioning specificities which need to be considered when defining management policies, even more so in the current context of global change. However, in Europe intermittent rivers benefit from the same regulations as permanent rivers, which undoubtedly leads to their degradation. This paper aims to identify (1) how perceptions and values of intermittent rivers interact with their management and (2) determine whether the prospect of climate change leads the stakeholders to questioning their perceptions and values of intermittent rivers and the way we should manage them. Semi-structured interviews and mental mapping exercises were conducted with 28 various stakeholders (elected officials, fishers, river managers, and residents), all of whom lived along the French intermittent Albarine River. Qualitative analysis of the discourses and maps confirms strong interactions between the perceptions and values related to intermittent rivers and their management. The results highlight social devaluation of the intermittent section in terms of aesthetics, recreation, and biological values. They also point to the role of power plays between river managers and fishers, in the prioritization of management actions that favor perennial sections to the detriment of intermittent ones. These dynamics of devaluing and discarding intermittent sections or rivers from management plans are all the more alarming as there is little propensity among river stakeholders to think about the future of these intermittent rivers and their value in the context of climate change, where the prevalence of intermittent rivers is likely to increase dramatically. • Stakeholders devalue intermittent rivers (IR) compared to perennial rivers. • Devaluation is due to aesthetic, recreational and biological reasons. • Devaluation leads to IR or IR sections being excluded from management plans. • Stakeholders do not consider a future with increased intermittency with climate change. [ABSTRACT FROM AUTHOR]

Abstract: Pulp industry plays an important role in the structure of European economy and society. Paper pulp manufacture, the industrial utilization of plant biomass, is increasing every year. In Spain, Eucalyptus is the dominant raw material and the Kraft cooking and total chlorine free (TCF) bleaching processes lead the procedures of Eucalyptus paper pulp production. This paper aims to identify and quantify the environmental impacts associated to Eucalyptus TCF pulp manufacture by using Life Cycle Assessment (LCA) as an analytical tool. The system has been defined using a cradle-to-gate perspective, that is to say from forest activities to the exit gate of the pulp mill. The production of chemicals consumed in the cooking and bleaching stages as well as the on-site energy production system is the elements that contribute the most to all impact categories analyzed (more than 50% of total contributions), except for the eutrophication potential where forest activities and waste treatment play an important roles (about 52% of total). Specific actions associated to the recovery boiler, lime kiln and digestion stage could considerably reduce the environmental impact and improve the environmental performance of the Spanish paper pulp industry. [Copyright &y& Elsevier]

• Primary care plays a major role in the diagnosis of cancer and care of patients • Primary and community care are often not well integrated into cancer care • There are many opportunities for extending care at the primary level • Healthcare systems must consider new roles for primary and community professionals ECCO Essential Requirements for Quality Cancer Care (ERQCC) are checklists and explanations of organisation and actions that are necessary to give high-quality care to cancer patients. They are written by European experts representing all disciplines involved in cancer care. This paper concerns the integration of primary care into care for all cancers in Europe. Primary care integration: • Primary care professionals play major roles in the diagnosis of cancer and care of cancer patients • There are many opportunities for extending care at the primary level to cope with the increasing cancer burden and its nature as a chronic disease, but there are also significant barriers to progress towards high-quality patient-centred care • To meet European aspirations for comprehensive cancer control, healthcare organisations must consider the requirements in this paper to include primary and community care in patient-centred pathways from diagnosis to treatment and survivorship. [ABSTRACT FROM AUTHOR]

• Weather disasters are a growing burden in Europe, because of increasing losses and costs of precautionary measures. • Socio-economic, climatic and environmental changes drive the growing risk. • The insurance industry can play a major role in the partnership for reduction of risk of weather extremes Over the last decades, the damage caused by weather events has increased dramatically and ubiquitously. In Europe, weather catastrophes constitute a growing burden on national economies and insurance companies, not least because of the costs of precautionary measures. For a long time, the insurance sector has flagged that weather disasters are on the rise, both in terms of the number of occurrences and material damage caused. The main reasons for this are: increase in the number and area of settlements in exposed areas, the accumulation of ever more valuable and vulnerable assets in these areas, as well as the climate and environmental changes that have already taken place. This paper examines observed changes in risk of various categories of weather disasters in Europe, backed by statistical analyses of relevant, updated information originating from a valuable and quite unique source, Munich Re's NatCatSERVICE database, that is of considerable interest and value to the scientific community and beyond (e.g. in the reinsurance and insurance industries). The paper also calls for partnership in the reduction of risk of weather extremes and discusses the role of the insurance industry. [ABSTRACT FROM AUTHOR]

Inclusion of package leaflets in paper format is a legal requirement in European Union (EU), therefore the electronic package leaflet (ePL) is a relatively unknown phenomenon in medicinal products in Europe. Introduction of ePL only would be a more sustainable format of providing the product information than paper package leaflet. Furthermore, ePL would support health care professionals' comprehension of product use through electronic searchability and facilitate access to up-to-date product information in respective language used. It could also help us to tackle the availability issues and be a further step towards common packages. With this commentary, our aim is to review the ongoing ePL pilots in hospital settings in Europe and identify the benefits and challenges of ePL. Based on our review, there is a broad general support for the removal of paper package leaflets from hospital products. Packages without paper package leaflets are considered more sustainable due to savings in production and materials. Furthermore, ePL could be a facilitator for common packages in EU-countries with the benefit of reducing pharmaceutical waste and drug shortages. The most important benefit from both pharmaceutical industry and healthcare professionals' interest is that current and on-line updated product information is always electronically available, especially from drug safety perspective. [ABSTRACT FROM AUTHOR]

Recent technological developments make perovskite solar cells (PSCs) particularly suitable for building integrated photovoltaic (BIPV) applications on vertical building envelopes, but the relatively short lifespan of PSCs requires frequent replacement, thereby generating substantial waste. Careful consideration of circularity credentials of this novel technology is therefore essential prior to the extensive implementation of vertical PSCs in building envelopes. This paper provides a circular economy approach for the implementation of PSCs in vertical envelopes and assesses its economic feasibility by life cycle cost analysis in Europe. The process of recycling PSC is developed. The economic performance of PSC envelopes is provided and compared to that of the conventional rigid BIPV system. Uncertainty analysis and sensitivity analysis of economic indicators are then performed to identify the influential parameters. The findings indicate that the PSC envelope has a significant potential for circular BIPV components and that PSCs applied on vertical envelope are economically viable. • LCCA of vertical PSC envelopes with recycling strategy is analyzed in Europe. • Recycling strategy of PSC is explored before diffusion to overcome PSC's short lifespan. • PSC price is the most influential factor for the deviation of LCOE. • PSC envelope has potential to achieve profitability in most regions of Europe. [ABSTRACT FROM AUTHOR]

This paper proposes a set of digitalisation indicators focused on measuring the different digital capabilities and infrastructure of electricity distribution systems, as opposed to previous indicators which have mainly focused on performance and quality of service aspects. The indicators are classified according to the pillars of digitalisation: sensor and actuator, connectivity, data processing, and digital culture. They are use-case-agnostic and do not require a huge amount of information. In addition to this, three possible new applications of these indicators for distribution system operators and regulatory authorities are identified and discussed. The extensive use of these indicators in Europe could allow the development of fruitful collaborations between distribution system operators, allow the identification of cause–effect relations between grid performance and digital infrastructure, and improve the replicability of innovative smart grid solutions. However, this will only be possible if regulators promote the adoption of the proposed indicators and the dissemination of their results. • Smart grid indicators are required by European Directive 2019/944. • Indicators on sensors/actuators, connectivity, data processing, and digital culture. • Indicators to provide an overview of the distribution grid. • Indicators to study relation between performance and digital infrastructure. • Indicators to generate information for the replicability of solutions. [ABSTRACT FROM AUTHOR]

Of the 4.4 million people diagnosed with cancer in Europe each year, around 36 % are of working age. Return-to-work rates vary across Europe. Work is important for the individual, as well as for society, and this review aims to provide an overview of the predictors for the return to work (RTW) process in European cancer survivors of working age. A systematic literature search was conducted. The present review included quantitative and qualitative study designs published since 2013. In total, the review included 85 papers examining cancer survivors with various cancer diagnoses in 18 European countries. Identified predictive factors for RTW related to the social system, treatment, disease, health behavior, the individuals' psychosocial, work, and sociodemographic situations. There is a need for a standardized definition and operationalization of RTW. Providers can use these results to identify survivors at risk and support cancer survivors in their RTW process. [Display omitted] • Cancer survivors' RTW is associated with various predictors. • The predictors vary over time and differ between cancer entities and countries. • Predictors can be used to identify survivors at risk and to extent support programs. [ABSTRACT FROM AUTHOR]

• Investigation focuses on coupling link inspection, integral safety components to train screw coupling systems. • Plastic deformation increase, during operational use, did not affect yield stress or ultimate tensile strength. • Fractured links showed ductile fractures with distinctive surface structures. • 83 % of links, tested after 30 years in operation, exceeded the minimum breaking force. • Train brake analysis suggests a decrease in link failures due to other component issues. This paper presents an analysis of train screw coupling used mainly in Europe as mechanical connection of wagons in train. An analysis of train breaks apart incidents revealed that less than 30 % of the cases were caused by elements of the screw coupling, with coupling links accounting for only 5 % of the failures. Therefore, the investigation focused on testing the coupling links, which are safety elements of the screw coupling. The coupling links underwent various inspections, including visual inspection, dimensional control, non-destructive testing, examination of chemical composition, and mechanical tests. Dimensional control found longitudinal plastic deformations of the links. Chemical examination revealed that the links were made of different material than recommended, but their mechanical properties generally met the recommended values. However, variations were observed among different links, likely due to different rates of deformation during testing and operational conditions. Overall, the analysis and inspections provided insights into the condition and performance of coupling links in the screw coupling system, highlighting the importance of monitoring and maintaining these elements to ensure safe and efficient railway operations. [ABSTRACT FROM AUTHOR]

Policies aim to increase the penetration of renewable energy resources (RERs) to minimize the dependence on fossil fuels, have compelled different countries to devise their diverse blueprints by transforming smart grids infrastructure into futuristic grids or super smart grids (SSGs). Europe is taking the lead by developing SSGs by 2050, based on two exclusive alternatives, i.e., totally based on RERs and dispersed large decentralized networks. Critically assessing tensions in balancing load flow associated with RERs is a complicated task in SSGs. To solve this concern, the advanced probabilistic model is adopted in this research to observe the variations in demand and response profiles and mitigate it through transmission network planning using a super smart node transmission network topology (SSN). The proposed SSN transmission network topology outperforms the power synergy hub (PSHub) topology used in the existing literature through achieving an optimal load flow balancing in SSGs power infrastructure. This is also verified through simulation results, which provides an effective utilization of continuous spinning reserves (CSRs) and vehicle to grid (V2G) topologies integrated in an SSN transmission network topology for managing an optimized load flow balancing in SSGs. Additionally, this research work also provides a comprehensive overview of technical challenges in SSGs in terms of power flow control, their possible solutions, and future prospects. Finally, this paper concluded with the 2050 framework of futuristic SSGs, which provides a road map path for a sustainable and green energy environment for European infrastructure. [ABSTRACT FROM AUTHOR]

• Spatial and temporal variability of Es layer top frequency was analyzed. • Statistic Es layer top frequency at different seasons and phase of solar activity was performed. • The maps of the distribution of Es layer top frequency were produced. • The "cloud" model of Es layer was implemented in NIM-RT propagation model for ionogram simulations. This paper describes a study of the daily and yearly variability of one of the main characteristics of sporadic E layers (Es), the critical frequency (foEs). Our analysis is based on ionograms recorded by GIRO network ionosondes. The study estimates the spatial and temporal variability of the Es layer parameters and generates their statistics at different seasons and phases of the solar cycle. In turn, the statistics of the Es layer parameters can provide an assessment of the capability of the HF propagation forecasting. Further, maps of the distribution of Es layer critical frequency are produced. This paper implements the "cloud" model of Es layer in HF propagation model (Northern Ionosphere Model & Ray Tracing, NIM-RT) that can accurately reproduce many features observed in experimental measurements. Within this framework, a number of vertical sounding ionograms with the presence of Es layer are simulated based on the NIM-RT software. [ABSTRACT FROM AUTHOR]

The objective of this paper is to examine and provide a holistic assessment of the "Space and Security" Policy in Europe, taking into consideration the European and national Space Strategies, Programmes and Governance. The importance of security in European Union (EU) activities is increasing after a decade of unprecedented crises and challenges of multidimensional nature. Space, as an enabling tool in support of multiple policy areas, can contribute to national and supranational security objectives. Space can contribute to and ultimately reinforce the European integration process. The first part of this paper focuses on the description of the security aspects of the space activities in Europe. The analysis includes the two main extents of space security – security from space and security in space. The second part focuses on the security aspects of the European Union (EU), European Space Agency (ESA) and National Space strategies, policies and programmes. The importance of coordination and cooperation between the stakeholders is emphasised. The final part considers how the European "Space and Security" strategies and policies contribute to European Space Integration. • Overview of Space and Security in Europe. • Understanding of the Space Strategies, Programmes and Governance of ESA, EU and selected Member States. • Identification of security dimension of space activities from a space policy perspective. • Analysis of Space and Security Policy in the Frame of European Space Integration. [ABSTRACT FROM AUTHOR]

The objective of this paper is to develop a refined gravity model for the quantitative assessment of competitive hub status of cities between 2000 and 2012 from the perspective of international air traffic movements. Its focus of attention is Europe and Asia, where cross border competition has been witnessed among major cities for the role as a key international air traffic hub. To this end, the research incorporates global network connectivity (GNC) as a measure of business connections into an established gravity model that previously relied on GDP per head, population and distance to account for international air links. The results confirm the dynamic change of the air transport city hierarchy, demonstrating a stronger presence of a number of previously secondly ranked cities as international air traffic hubs over this period. The paper concludes with suggestions that possible extension of geographical scope and incorporation of domestic air traffic could enrich the insight of this approach. • Hub status of cities is assessed from an international air traffic perspective. • Networks of inter-city air traffic flows in Europe and Asia are explored. • Business connectivity is the most powerful in explaining international air links. • Secondly ranked cities are now more prominent in the region's urban hierarchies. • New airports and integrators' hubs have significant effect on cities' mobility. [ABSTRACT FROM AUTHOR]

• Government policy shall address the strategic nature of local resource use decisions. • Local resource users face linked coordination, prisoner's dilemma, and zero-sum/externality situations. • Governments shape the behavior of local resource users via bundles of policy instruments. • Policy instruments contribute to local collective action via a handful of mechanisms. This paper presents a diagnostic approach to the role and capacity of governments to facilitate local collective action and alleviate environmental problems. The paper adds to a nascent scholarship aiming to conciliate theories on "governance by government" and "governance by self-organization". We adopt two premises for that purpose: (1) policy instruments shall be tailored to the strategic nature of local resource management decisions; and (2) such nature is not static and can be modified via governmental policies. We first build on the Institutional Analysis and Development (IAD) framework to characterize the decision-making situations that local resource users face and the local rules that shape said situations. Then, based on common pool resource (CPR) and policy instrument choice theory, we identify four mechanisms through which different policy instruments can facilitate local collective action (change in payoffs and their perception, reduction of transaction costs, reduction of uncertainty, and normative consonance). This analytical approach is then applied to four illustrative cases of water management in Germany, France, Greece and Spain. As shown, local resource users are embedded in not one but many overlapping decision-making situations. In this context, the promotion of collective action is rarely accomplished via a single policy instrument or mechanism but via bundles of them. Also, the paper illustrates the importance of understanding how governmental policies modify the structure of rules and incentives that affect local resource users, potentially facilitating local collective action and the solution of environmental problems. [ABSTRACT FROM AUTHOR]

Abstract Citizen science has emerged as an important tool in biology, ecology, and conservation studies. In this paper, we examined YouTube (YT) videos featuring the behaviour of red (Sciurus vulgaris) and grey (Sciurus carolinensis) squirrels in Europe, in both urban and forest habitats. Our study shows that specific behaviours of these squirrels, such as aggression, grooming and calling, have frequently been recorded on YT videos. The present paper uses this open data for the first time to compare differences between the frequency of some types of behaviour in two habitats. Based on detrended correspondence analysis, we show a significant difference in sets of behaviours between two squirrel species. Our investigation show that YT can be a source for monitoring the behaviour of wild species, especially in urban habitats, thus affording insights into the species plasticity of urban individuals. YT, as part of citizen science, is a potential source of information in behavioural ecology. Highlights • Citizen science has emerged as an important tool in scientific research. • Squirrels behaviour types were different between habitats but not between species. • Feeding behaviour was connected with interaction with people in urban habitats. • Social media like YouTube provide a source of additional information in behavioural ecology. [ABSTRACT FROM AUTHOR]

Abstract The increasing global demand for food and the environmental effects of reactive nitrogen losses in the food production chain, increase the need for efficient use of nitrogen (N). Of N harvested in agricultural plant products, 80% is used to feed livestock. Because the largest atmospheric loss of reactive nitrogen from livestock production systems is ammonia (NH 3), the focus of this paper is on N lost as NH 3 during the production of animal protein. The focus of this paper is to understand the key factors explaining differences in Nitrogen Use Efficiency (NUE) of animal production among various European countries. Therefore we developed a conceptual framework to describe the NUE defined as the amount of animal-protein N per N in feed and NH 3 N losses in the production of milk, beef, pork, chicken meat and eggs in The Netherlands, Switzerland, United Kingdom, Germany, Austria and Denmark. The framework describes how manure management and animal-related parameters (feed, metabolism) relate to NH 3 emissions and NUE. The results showed that the animal product with the lowest NUE had the largest NH 3 emissions and vice versa, which agrees with the reciprocal relationship between NUE and NH 3 within the conceptual framework. Across animal products for the countries considered, about 20% of the N in feed is lost as NH 3. The significant smallest proportion (12%) of NH 3 N per unit of N feed is from chicken production. The proportions for other products are 17%, 19%, 20% and 22% for milk, pork, eggs and beef respectively. These differences were not significantly different due to the differences among countries. For all countries, NUE was lowest for beef and highest for chicken. The production of 1 kg N in beef required about 5 kg N in feed, of which 1 kg N was lost as NH 3 N. For the production of 1 kg N in chicken meat, 2 kg N in feed was required and 0.2 kg was lost as NH 3. The production of 1 kg N in milk required 4 kg N in feed with 0.6 kg NH 3 N loss, the same as pork and eggs, but those needed 3 and 3.5 kg N in feed per kg N in product respectively. Except for beef, the differences among these European countries were mainly caused by differences in manure management practices and their emission factors, rather than by animal-related factors including feed and digestibility influencing the excreted amount of ammoniacal N (TAN). For beef, both aspects caused important differences. Based on the results, we encourage the expression of N losses as per N in feed or per N in product, in addition to per animal place, when comparing production efficiency and NUE. We consider that disaggregating emission factors into a diet/animal effect and a manure management effect would improve the basis for comparing national NH 3 emission inventories. Graphical abstract Image 1 Highlights • A theoretical framework describes NH 3 N loss and NUE related to animal protein production instead of to raw product. • Animal protein in chicken meat had the highest NUE and the lowest NH3 N losses; the reverse was true for beef. • Differences in NUE and NH3 N losses between countries are mainly explained by manure management. • For beef production differences in manure management and TAN production are both relevant. • Presenting additional metrics than N-lost per animal place would enable a more informed comparison of production systems. [ABSTRACT FROM AUTHOR]

• Paper describes a methodology that was successfully applied for the development of a temporary road traffic steel barrier in compliance with T1/W1 level according to EN 1317; • A simplified theoretical analysis of 178 barrier, laboratory test of three types of barrier connectors (for two types of barrier), explicit FEM modeling of four chosen barrier, and a full-scale crash test for final barrier are presented; • The stiffness of barrier connector was established based by laboratory barrier test (the FEM model was validated based on laboratory tests); • The chosen final barrier alternative passed the crash test for T1/W1 (TB21) containment level, performed by certified laboratory [35] , which proves that the presented procedure could be used successfully for traffic barrier development. Over a million people die in road crashes and tens of millions result injured or disabled each year, globally. Hence, there is a constant concern for improving the safety of the roads to protect road users, and those at the most risk, the road workers. Construction, maintenance, and utility work are constantly needed to ensure safety and functionality of roads and highways. Temporary road traffic barriers are used to separate passing traffic from the workspace and protect the workspace from an errant vehicle intrusion. Steel barriers are light, and their major advantage is rapid installation. These barriers are not anchored to the ground, and their behavior relies on the base-pavement friction, mass inertia, and stiffness of the system. The paper describes a methodology that was successfully applied for the development of a temporary road traffic steel barrier in compliance with the European specification EN 1317. The study included a simplified theoretical analysis of 178 barriers, static laboratory tests of three types of barrier connectors, development of explicit finite element models (EFEMs) of four selected barrier designs, and a full-scale crash test of the final barrier design. It is shown that static laboratory tests of complex connector systems can help to improve the design process and reduce the cost. The analysis and use of EFEMs was enough so that just a single full-scale crash test was sufficient for certification of the barrier design for use in Europe. The final barrier is compliant with the EN 1317–2 requirements for T1/W1 (TB21) containment level, which was confirmed by a full-scale crash test. [ABSTRACT FROM AUTHOR]

Buildings are the largest energy consumers in Europe and are responsible for approximately 40% of EU energy consumption and 36% of the greenhouse gas emissions in Europe. Two-thirds of the building consumption is for residential buildings. To achieve energy efficiency, buildings are being integrated with IoT devices through the use of smart IoT services. For instance, a smart space heating service reduces energy consumption by dynamically heating apartments based on indoor and outdoor temperatures. The W3C recommends the use of the Web of Things (WoT) standard to enable IoT interoperability on the Web. However, in the context of a smart building, the ability to search and discover building metadata and IoT devices available in the WoT ecosystems remains a challenge due to the limitation of the current WoT Discovery, which only includes a directory containing only IoT devices metadata without including building metadata. Integrating the IoT device's metadata with building metadata in the same directory can provide better discovery capabilities to the IoT services providers. In this paper, we integrate building metadata into the W3C WoT Discovery through the construction of a Building Description JSON-LD file. This Building Description is integrated into the W3C WoT Discovery and based on the domOS Common Ontology (dCO) to achieve semantic interoperability in smart residential buildings for the WoT IoT ecosystem within the Horizon 2020 domOS project. This integration results in a Thing and Building Description Directory. dCO integrates the SAREF core ontology with the Thing Description ontology, devices, and building metadata. We have implemented and validated the WoT discovery on top of a WoT Thing and Building Description Directory. The WoT Discovery implementation is also made available for the WoT community. [ABSTRACT FROM AUTHOR]

As short-term variations existing in differential code bias of receivers (RDCB) will decrease the accuracies of extracting ionospheric observables by carrier-to-code leveling (CCL) method, a modified carrier-to code leveling (MCCL) method had been proposed to estimate RDCB offsets epoch by epoch in retrieval of ionospheric information. However, MCCL method is hampered by efficiency and precision at higher sampling intervals. To address RDCB offsets in higher sampling rate domain, a kernel model in the form of radial basis function (RBF) was chosen to model RDCB offsets produced by MCCL using lower sampling rate data in this paper. Owing to ill-posed problem induced by setting to many kernels, L1 norm regulation was employed to promote the sparsity of the problem and Fast iterative shrinkage thresholding algorithm (FISTA) was adopted to find the sparse solution. Data sets of 350 IGS stations evenly distributed in high-solar and low-solar activity years were chosen to illustrate the general existences of RDCB offsets and their dependence on solar activity. To validate the reliability and efficiency of the proposed method, two stations of them were selected out to construct the spares kernel model. As shown in experimental results, kernel model is of good performance in training data with over 90% sparsity rate and all standard deviations of the errors between original and fitting data are around 0.4 ns. It is a striking finding in terms of efficiency that the proposed method and CCL are much more efficient than MCCL in extracting ionospheric observables by means of fixed equipment. For further validations, generalized triangular series function (GTSF) was constructed using ionospheric observables derived from precise point positioning (PPP), CCL, MCCL and the proposed method. With Center for Orbit Determination in Europe (CODE) Global Ionospheric Map (GIM) regarded as reference, compared with VTEC estimates derived from CCL, those derived from MCCL and the proposed method have improved accuracies ranging from 10% to 20%. Overall, these results indicate that the proposed method has a promising application in retrieval of ionospheric observables in terms of accuracy and efficiency. [ABSTRACT FROM AUTHOR]

The Eco-Management and Audit Scheme (EMAS) is a voluntary Regulation that defines the European Environmental Management System (EMS). Today the EMAS is undergoing a revision process, in order to fit the scheme to organizations and stakeholders’ requirements and increase its diffusion. Italy accounts for roughly 1,000 of the 4,000 certified European organizations and, especially during the last five years, a growing number of organizations have not renewed the certification. Thus, the aim of the survey is to investigate why many Italian organizations have dropped out of EMAS, and to identify which enabling measures would be more effective in order to encourage organizations to move back to the certification. The target of the questionnaire were the 339 Italian organizations that did not renew their EMAS registration between 2010 and 2015, and respondents were 99. In the first part of the paper, we present the general findings, while in the second one, certified Public Administrations and private-owned organizations are compared in order to delineate significant differences between the two groups. Concerning motivations for not renewing EMAS, implementation costs were the key reasons for both groups. Conversely, considering the possible enabling measures, while private-owned organizations demand long term tax benefits, Public Administrations prefer a greater consideration of EMAS in public funding. This paper systematically addresses this phenomenon through a survey, contributing to reduce the existing gap in literature and providing a useful input to decision-makers who are overseeing the EMAS revision process. [ABSTRACT FROM AUTHOR]

Behaviour, practices and culture constitute a powerful human factor in the energy system; in particular the interactions between technologies, practices and norms lock individuals in to certain patterns of (often inefficient) energy use. Consequently, behaviour change has gained traction amongst policymakers as a key area of intervention given the impact energy-related behaviours have on climate change. Given the increasing emphasis within policy perspectives in the European Union, it is surprising that a gap in understanding of the success factors of behaviour change initiatives remains. This paper addresses this gap by identifying and characterising behaviour change initiatives across five European countries (the UK, Ireland, France, Italy, and Spain). The paper provides insights into the success factors and commonly encountered barriers to behaviour change initiatives. Initiatives are classified into 6 broad categories (community-based interventions; information and awareness based interventions; eco-districts; show-case events; energy switching; and smart-technology focused interventions). The results suggest that there are significant knowledge gaps between what is known to work to engage individuals in behavioural change and what is currently being applied in practice. An over-reliance on education and awareness-raising projects is evident, illustrating that such projects do not sufficiently aim for sustained behavioural changes. A dearth of projects incorporating fiscal measures, regulations or legislation to drive behaviour change reflects reluctance on behalf of decision-makers to engage widely with diverse approaches to foster lifestyle change. This paper contributes understandings of the different models and delivery tools employed to change energy-related behaviours; insights into the critical success factors that underpin best practice and the barriers to action; and a ‘what works in practice’ overview of the meaningful approaches to change behaviour. [ABSTRACT FROM AUTHOR]

Recent and historic low-frequency, high-impact events have demonstrated the flood risks faced by exposed coastal areas in Europe and beyond. These coastal zone risks are likely to increase in the future which requires a re-evaluation of coastal disaster risk reduction (DRR) strategies and a new mix of PMP (prevention, e.g., dike protection; mitigation, e.g., limiting construction in flood-prone areas and eco-system based solutions; and preparedness, e.g., Early Warning Systems, EWS) measures. In response to these challenges, the RISC-KIT project has delivered a set of open-source and open-access methods, tools and management approaches to reduce risk and increase resilience to low-frequency, high-impact hydro-meteorological events in the coastal zone (the “RISC-toolKIT”). These products enhance forecasting, prediction and early warning capabilities, improve the assessment of long-term coastal risk and optimise the mix of PMP-measures. In this paper an introduction is provided to the objectives, products, applications and lessons-learned of the RISC-KIT project, which are the subjects of this Special Issue. Subsequent papers provide details on the tools and their application on 10 case study sites in Europe. [ABSTRACT FROM AUTHOR]

This paper introduces a participatory Multi-Criteria Assessment (MCA) methodology developed through the Resilience Increasing Strategies for Coasts – Toolkit (RISC-KIT) project and implemented in nine case studies in Europe. The purpose of the MCA was to bridge the disciplinary divide between engineering sciences and social sciences, facilitate the communication and dissemination of local coastal risk assessments and Disaster Risk Reduction (DRR) measures' evaluation to a broad range of actors. The process addressed the importance of integrating scientific knowledge with stakeholders’ knowledge to understand and assess the possible social, political and economic implications of different DRR measures, which could foster or hinder successful implementation. The paper discusses the methodological aspects and implementation of the approach which included visualizing risk reduction of DRR measures using paper-based cards to support interaction and negotiation among participants to select preferred strategic alternatives (SA), and a participatory MCA where stakeholders evaluated the SA against three (self-weighted) criteria: feasibility, acceptability and sustainability. [ABSTRACT FROM AUTHOR]

The European Space Agency (ESA) has twenty-two Member States with a variety of governance structures and strategic priorities regarding their space activities. The objective of this paper is to provide an up-to date overview and a holistic assessment of the national space governance structures and strategic priorities of the eleven smaller Member States (based on annual ESA contributions). A link is made between the governance structure and the main strategic objectives. The specific needs and interests of small and new Member States in the frame of European Space Integration are addressed. The first part of the paper focuses on the national space governance structures in the eleven smaller ESA Member States. The governance models of these Member States are identified including the responsible ministries and the entities entrusted with the implementation of space strategy/policy and programmes of the country. The second part of this paper focuses on the content and analysis of the national space strategies and indicates the main priorities and trends in the eleven smaller ESA Member States. The priorities are categorised with regards to technology domains, the role of space in the areas of sustainability and the motivators for space investments. In a third and final part, attention is given to the specific needs and interests of the smaller Member States in the frame of European space integration. ESA instruments are tailored to facilitate the needs and interests of the eleven smaller and/or new Member States. [ABSTRACT FROM AUTHOR]

Shear reinforcement design has changed over time, along with the knowledge about the shear behaviour of reinforced concrete structures. Until the 1970s, the shear design in Europe was based on empirical limits for shear stress. The rules stipulated by the design standards often resulted in designs of concrete slabs with shear reinforcement consisting only of bent-up bars without any additional stirrups. Today, truss models are widely used to design shear reinforcement. However, in the structural assessment of bridges with bent-up bars, it is difficult to apply such models due to their specific detailing requirements. In order to evaluate the applicability of current design standards and to span the knowledge gap between the load-bearing behaviour of small-size specimens and actual structures, four shear tests on two full-scale replica bridge slabs containing bent-up bars are presented in this paper. The applied load configuration represents two-axle and four-wheel loads of the current load models for railway bridges stipulated by Eurocode 1–2 and train load model UIC 71. The load distribution due to a track superstructure consisting of a track, sleepers and ballast was investigated. A comparison of the obtained results with those of preliminary tests on narrow slab strips shows differences in the load-bearing behaviour of small-format laboratory tests. The results of the analysis of the bridge slabs according to various design standards show the potential of the newly developed potential shear crack model for the assessment of slab bridges with bent-up reinforcing bars. • Four shear tests on two full-scale replica bridge slabs containing bent-up bars. • Experimental investigation of the load distribution effect due to a complete track superstructure on the shear strength. • Comparison of the load-bearing behaviour of full-size slabs with small-format laboratory tests with a tenth of the width. • Analytical verification of the test results and discussion of shear models of various standards. [ABSTRACT FROM AUTHOR]

This paper delves into an econometric analysis to uncover the differences between Nordic European Countries - NEC (Norway, Denmark, Finland, Sweden) and South-East European Countries - SEEC (Greece, Bulgaria, Romania, Hungary). The focus is on exploring the interplay among electricity generation from Renewable Energy Sources (RES), CO 2 emissions, urban population and GDP per capita in these two European regions. The study employs cross-sectional dependence, first and second-generation panel unit root tests, Pedroni panel and Westerlund panel cointegration tests, ARDL, Dumitrescu-Hurlin causality test to establish the relation among variables. The findings reveal that in both regions, CO 2 emissions are significantly influenced by GDP per capita, urbanization and RES generation. Furthermore, urbanization plays an important role. When examining causality in SEEC, three bidirectional relationships are observed: urbanization and CO 2 , urbanization and GDP, urbanization and generation from RES, and two unidirectional causalities: CO 2 and GDP, generation from RES and CO 2. In contrast, for the NEC, there are two bidirectional causalities: urbanization and CO 2 , urbanization and generation from RES, and two unidirectional causalities: GDP and CO 2 , generation from RES and CO 2. These results highlight the nuanced and varied nature of environmental and economic dynamics across various European regions. • Relationship between CO 2 emissions, GDP per capita and electricity production from RES. • Investigating two groups of EU countries located in the North and SE Europe. • Estimations with Fully Modified and Dynamic Ordinary Least Squares. • Causality and cointegration between variables. [ABSTRACT FROM AUTHOR]

The capability to predict tritium retention and permeation by accurate and reliable tritium transport models for the breeding blanket design development is one of the most relevant objectives of the European Test Blanket Module (TBM) Programme. This also represents a key aspect for the development and licensing of next-future fusion systems and power plants, including the European DEMO. Tritium analyses can be performed using either system-level models to calculate global blanket and the related ancillary system performances or detailed 3D models for spatially limited areas and critical regions: the choice between these two modelling approaches depend on the objective of each analyse. When looking at the accuracy of tritium transport simulations, two main aspects have to be considered: the first one is the completeness of the description of the physical phenomena participating to the tritium transport dynamics; the second one is the reliability of the tritium transport material property values used in the simulation activities. In this context, this paper has the objective to carry out a critical analysis on the status of the integration of the most relevant multi-physics elements, providing recommendations on the approach to follow, with a particular focus on the system-level codes. Moreover, a set of data and correlations on tritium transport materials properties is proposed as a first step towards a material property database to be shared within the breeding blanket community. [ABSTRACT FROM AUTHOR]