Search

An electron monochromator design is presented as an instrumental development for electron energy loss spectroscopy (EELS) and imaging in (scanning) transmission electron microscopy ((S)TEM). The main purpose of this development is enhancing the energy resolving power in spectroscopy and filtering. In addition, it helps reducing the effect of the objective lens' chromatic aberration C c in imaging and therefore, enhancing the spatial resolving power of electron microscopes. General estimates for the performance of a monochromator in energy distribution and the resulting usable beam currents are given. The special monochromator design presented is a ground-potential monochromator based on magnetic sector fields. The monochromator generates a spatially and angular un-dispersed spot and has no mechanically actuated parts in the filter sections. The optics can be operated at electron acceleration voltages from 30kV to 300kV and shows an energy resolving power of better than 2⋅10 -7 relative to the primary electron energy. The actual device is designed to be retro-fittable to microscopes from various manufacturers., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: Maximilian Haider reports financial support was provided by European Research Council. All Authors report a relationship with CEOS GmbH that includes: employment and equity or stocks., (Copyright © 2023 CEOS GmbH. Published by Elsevier B.V. All rights reserved.)

Fundamental solid state physics phenomena often occur at very low temperatures, requiring liquid helium cooling in experimental studies. Transmission electron microscopy is a well-established characterization method, which allows probing crucial materials properties down to nanometre and even atomic resolution. Due to the limited space in the object plane, however, suitable liquid-helium cooling is very challenging. To overcome this limitation, resolving power was sacrificed in our Dresden in-situ (S)TEM special, resulting in more than 60 mm usable experimental space in all directions with the specimen in the centre. With the installation of a continuous-flow liquid-helium cryostat, any temperature between 6.5 K and 400 K can be set precisely and kept for days. The information limit of the Dresden in-situ (S)TEM special is about 5 nm. It is shown that the resolution of the Dresden in-situ (S)TEM special is currently not limited by aberrations, but by external instabilities., (Copyright © 2019 Elsevier B.V. All rights reserved.)

The progress in (scanning) transmission electron microscopy development had led to an unprecedented knowledge of the microscopic structure of functional materials at the atomic level. Additionally, although not widely used yet, electron holography is capable to map the electric and magnetic potential distributions at the sub-nanometer scale. Nevertheless, in situ studies inside a (scanning) transmission electron microscope ((S)TEM) are extremely challenging because of the much restricted size and accessibility of the sample space. Here, we introduce a concept for a dedicated in situ (S)TEM with a large sample chamber for flexible multi-stimuli experimental setups and report about the electron optical performance of the instrument. We demonstrate a maximum resolving power of about 1 nm in conventional imaging mode and substantially better than 5 nm in scanning mode while providing an effectively usable "pole piece gap" of 70 mm., (Copyright © 2014 Elsevier B.V. All rights reserved.)

In situ electrical characterization of nanostructures inside a transmission electron microscope provides crucial insight into the mechanisms of functioning micro- and nano-electronic devices. For such in situ investigations specialized sample holders are necessary. A simple and affordable but flexible design is important, especially, when sample geometries change, a holder should be adaptable with minimum effort. Atomic resolution imaging is standard nowadays, so a sample holder must ensure this capability. A sample holder design for on-chip samples is presented that fulfils these requisites. On-chip sample devices have the advantage that they can be manufactured via standard fabrication routes., (Copyright © 2014 Elsevier B.V. All rights reserved.)

Electron holography initially was invented by Dennis Gabor for solving the problems raised by the aberrations of electron lenses in Transmission Electron Microscopy. Nowadays, after hardware correction of aberrations allows true atomic resolution of the structure, for comprehensive understanding of solids, determination of electric and magnetic nanofields is the most challenging task. Since fields are phase objects in the TEM, electron holography is the unrivaled method of choice. After more than 40 years of experimental realization and steady improvement, holography is increasingly contributing to these highly sophisticated and essential questions in materials science, as well to the understanding of electron waves and their interaction with matter., (© 2013 Elsevier B.V. All rights reserved.)