Search

ABSTRACT: Conventional cages for laying hens will be banned in Canada as of 2036, and the egg industry is transitioning toward enriched colony housing and aviaries. While higher concentrations of particulate matter have been previously reported in aviaries and other cage-free housing systems, concentrations of total bacteria and archaea suspended in the air are still uncharacterized in Canadian enriched colonies and aviaries. The aim of the present study was to conduct a longitudinal survey of airborne total bacteria and of airborne total archaea in twelve enriched colonies and twelve aviaries in Eastern Canada during a whole laying period. High-throughput sequencing of 16S rRNA gene amplicons was used to reveal and compare bacterial diversity at the start and the end of the production cycle, and during the cold and the warm seasons. Total bacterial and archaeal concentrations were significantly higher in aviaries (p < 0.05) versus enriched colonies, and in the cold season for both housing types (p < 0.05). While flock age did not have a significant effect on total bacterial and archaeal concentrations, it did on bacterial diversity in both enriched colony houses and aviaries (p < 0.05). The 2 housing systems were significantly different in their diversity of bacteria.

Bioaerosols produced during animal production have potential adverse effects on the health of workers and animals. Our objective was to investigate characteristics, antibiotic-resistance genes (ARGs), and health risks of bioaerosols in various animal barns. Poultry and swine barns had high concentrations of airborne bacteria (11156 and 10917 CFU/m3, respectively). Acinetobacter, Clostridium sensu stricto, Corynebacterium, Pseudomonas, Psychrobacter, Streptococcus, and Staphylococcus were dominant pathogenic bacteria in animal barns, with Firmicutes being the most abundant bacterial phylum. Based on linear discriminant analysis effect size (LEfSe), there were more discriminative biomarkers in cattle barns than in poultry or swine barns, although the latter had the highest abundance of bacterial pathogens and high abundances of ARGs (including tetM, tetO, tetQ, tetW sul1, sul2, ermA, ermB) and intI1). Based on network analyses, there were higher co-occurrence patterns between bacteria and ARGs in bioaerosol from swine barns. Furthermore, in these barns, relative abundance of bacteria in bioaerosol samples was greatly affected by environmental factors, mainly temperature, relative humidity, and concentrations of CO2, NH3, and PM2.5. This study provided novel data regarding airborne bio-contaminants in animal enclosures and an impetus to improve management to reduce potential health impacts on humans and animals.

Fine dust and bioaerosols are significant public health concerns, showing the importance of protective measures. In this study, natural-based trimethyl chitosan, permanently burdened with a positive charge, was successfully distributed on the surface of melt-blown polypropylene sheets through a metal rod coating process. This surface modification was confirmed through scanning electron microscopy and X-ray photoelectron spectroscopy, indicating the surface adsorption of trimethyl chitosan without chemical bonding. Modifying polypropylene mask filters yielded a positive surface zeta potential for 10–20 g/m2 coat weight, increasing the filtration efficiency to 55–94 % in a standard particle filtration test using paraffin oil as a liquid aerosol. The filtration efficiency remained higher than conventional non-treated mask filters even after the humidification of sheets. In addition, the filtration test against fine dust particles, such as titanium dioxide, was performed with trimethyl chitosan-modified mask filters that captured up to 100–800 µg/m3 titanium oxide particle concentrations, showing better filtration than conventional mask filters in high fine dust events. Trimethyl chitosan-modified mask filters also exhibited potent inhibition, bactericidal, and antiviral effects against HCoV-OC43, reducing the virus infection rate by 93.69 %. Thus, trimethyl chitosan could be applied to several existing filter membranes to protect against particulate matter and dangerous airborne pathogens.

Antibiotic resistance genes (ARGs) are widespread environmental pollutants of biological origin that pose a significant threat to human, animal, and plant health, as well as to ecosystems. ARGs are found in soil, water, air, and waste, and several pathways for global dissemination in the environment have been described. However, studies on airborne ARG transport through atmospheric particles are limited. The ARGs in microorganisms inhabiting an environment are referred to as the “resistome”. A global search was conducted of air-resistome studies by retrieving bioaerosol ARG-related papers published in the last 30 years from PubMed. We found that there is no dedicated methodology for isolating ARGs in bioaerosols; instead, conventional methods for microbial culture and metagenomic analysis are used in combination with standard aerosol sampling techniques. There is a dearth of information on the bioaerosol resistomes of freshwater environments and their impact on freshwater sources used for drinking and recreational activities. More studies of aerobiome freshwater environments are needed to ensure the safe use of water and sanitation. In this review we outline and synthesize the few studies that address the freshwater air microbiome (from tap water, bathroom showers, rivers, lakes, and swimming pools) and their resistomes, as well as the likely impacts on drinking and recreational waters. We also discuss current knowledge gaps for the freshwater airborne resistome. This review will stimulate new investigations of the atmospheric microbiome, particularly in areas where both air and water quality are of public health concern.

Many bacteria and viruses are spreading in the air in the living environment, and high concentrations of viruses entering the human body will cause harm. This research is committed to developing a virus collector, which is used to collect influenza and coronavirus in the air. In our system, the intake fan can beget negative pressure into the water circulation channel and bring the virus into it, and then the sensor chip will obtain the electrical signal. In this study, we successfully used methylene blue to simulate viruses in the air. The result of this experiment showed that the distance between the air virus collector and the atomizer was 30 cm in height, 60 cm & 90 cm in length. The capture efficiency was respectively 1.1% and 0.8%. Also, we use lateral flow immunochromatographic assay to detect the collected samples of Influenza H1N1 Hemagglutinin Protein, and the actual limit of detection is 16.97 ng/ml. In addition, the experiments also proved that the water circulation device in this study could accumulate the methylene blue samples onto the sensor. In the future, it can be used with the sensor chip as a virus detection platform which can collect and monitor viruses simultaneously. By using this device, people can be warned and take the necessary precautions to reduce the chance of the transmission of viruses.

Bioaerosol is a new type of pollutant, which is related to the spread of many diseases. In particular, the bioaerosol produced in the hospital sewage treatment process contains many pathogenic bacteria, which will impact patients and surrounding residents. In this study, the biochemical tank (BRT) of the hospital sewage treatment station (HSTS) and municipal wastewater treatment plant (MWTP) were used as sampling points. The results showed that the concentration of bacteria (1843 CFU/m3) in bioaerosol produced by BRT of HSTS was higher than that in the air at BRT of MWTP (1278 CFU/m3). The proportion of small-size bacteria (

The nontuberculous mycobacterial pulmonary disease (NTM-PD) caused by Mycobacterium species has increased in prevalence all over the world. The distributions of NTM-PD are possibly determined by the westerly wind traveling at high altitudes over East Asia. However, the long-range transport of Mycobacterium species has not been demonstrated by analyzing the bacterial communities in aerosols such as desert mineral particles and anthropogenic pollutants transported by the westerly wind. Here, airborne bacterial compositions were investigated including Mycobacterium species in high-elevation aerosols, which were captured in the snow cover at 2,450 m altitude on Mt. Tateyama. This was further compared to the ground-level or high-altitude aerosols collected at six sampling sites distributed from Asian-dust source region (Tsogt-Ovoo) to downwind areas in East Asia (Asian continental cities; Erenhot, Beijing, Yongin, Japanese cities; Yonago, Suzu, Noto Peninsula). The cell concentrations and taxonomic diversities of airborne bacteria decreased from the Asian continent to the Japan area. Terrestrial bacterial populations belonging to Firmicutes and Actinobacteria showed higher relative abundance at high-elevation and Japanese cities. Additionally, Mycobacterium species captured in the snow cover on Mt. Tateyama increased in relative abundance in correspondence to the increase of black carbon concentrations. The relative abundance of Mycobacterium sequences was higher in the aerosol samples of Asian continental cities and Japanese cities than in the desert area. Presumably, anthropogenic pollution over East Asia carries potential Mycobacterium species, which induce NTM-PD, thereby impacting upon the public health.

Pollen grains may contain allergens that exacerbate allergic respiratory diseases like asthma and rhinitis. In the presence of water, pollen grains (10–100 μm) can rupture to produce sub-pollen particles (SPP) with diameters 1.0 μm), which is consistent with intact fungal spore diameters (1–30 μm). Bacterial endotoxins in PM also increased during extreme weather events, primarily in supermicron particles. While the concentrations of fructose, mannitol, and endotoxin all increased in PM2.5 μm during thunderstorms, the greatest relative increase in concentration was observed for fructose. Together, these observations suggest that SPP containing starch granules and allergens (Bet v 1) were released during rainy sampling periods. This study advances the use of chemical tracers to track SPP and other bioaerosols in the atmosphere, by providing new insight to their size distribution and response to extreme weather conditions.

Construction of air filter membranes bearing prominent collecting and transferring capability is highly desirable for detecting airborne pathogens but remains challenging. Here, a hyaluronic acid air filter membrane (HAFM) with tunable heterogeneous micro-nano porous structures is straightforwardly constructed through the ethanol-induced phase separation strategy. Airborne pathogens can be trapped and collected by HAFM with high performance due to the ideal trade-off between removal efficiency and pressure drop. By exempting the sample elution and extraction processes, the HAFM after filtration sampling can not only directly disperse on the agar plate for colony culture but also turn to an aqueous solution for centrifugal enrichment, which significantly reduces the damage and losses of the captured microorganisms. The following combination with ATP bioluminescence endows the HAFM with a real-time quantitative detection function for the captured airborne pathogens. Benefiting from high-efficiency sampling and non-traumatic transfer of airborne pathogens, the real-world bioaerosol concentration can be facilely evaluated by the HAFM-based ATP assay. This work thus not only provides a feasible strategy to fabricate air filter membranes for efficient microbial collection and enrichment but also sheds light on designing advanced protocols for real-time detection of bioaerosols in the field., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Conventional cages for laying hens will be banned in Canada as of 2036, and the egg industry is transitioning toward enriched colony housing and aviaries. While higher concentrations of particulate matter have been previously reported in aviaries and other cage-free housing systems, concentrations of total bacteria and archaea suspended in the air are still uncharacterized in Canadian enriched colonies and aviaries. The aim of the present study was to conduct a longitudinal survey of airborne total bacteria and of airborne total archaea in twelve enriched colonies and twelve aviaries in Eastern Canada during a whole laying period. High-throughput sequencing of 16S rRNA gene amplicons was used to reveal and compare bacterial diversity at the start and the end of the production cycle, and during the cold and the warm seasons. Total bacterial and archaeal concentrations were significantly higher in aviaries (p < 0.05) versus enriched colonies, and in the cold season for both housing types (p < 0.05). While flock age did not have a significant effect on total bacterial and archaeal concentrations, it did on bacterial diversity in both enriched colony houses and aviaries (p < 0.05). The 2 housing systems were significantly different in their diversity of bacteria., Competing Interests: DISCLOSURES The authors declare no conflicts of interest., (Copyright © 2024 The Authors. Published by Elsevier Inc. All rights reserved.)

Bioaerosols released from municipal wastewater treatment plants (MWWTPs) contain pathogenic microorganisms, if dispersed into the atmosphere, which pose potential health risks to humans. In this study, the concentrations and size distribution of bioaerosol, factors on the bioaerosol emission, exposure risk, and microbial composition in different treatment units of a MWWTP were investigated. The results showed that bioaerosol was released to different degrees in each treatment unit, with the concentrations of bioaerosol varied widely, ranging from 978 to 3710 CFU/m 3 . FG and PST were primary bioaerosol emission sources in MWWTP. COD concentration, wind speed (WS) and relative humidity (RH) significantly influenced bioaerosol concentrations. The proportion of inhalable particles (< 4.7 μm) ranged from 51.35 % to 83.33 %, and bioaerosol emitted from WWTP caused a non-carcinogenic risk to children by the exposure risk assessment (HI > 1), which need to be paid more attention. Bacterial, fungal and actinomycete aerosols were detected in each treatment unit of MWWTP. Among these bioaerosols, bacterial aerosol was dominant. Importantly, several pathogenic bacteria including Sphingobium, Brevundimonas, Romboutsia, Arcobacter, Acinetobacter, and Mycobacterium were identified within the airborne bacteria population, most of which originated from wastewater or sludge, particularly in the ambient air of AeT. Pathogenic bacteria from MWWTP should be studied further to determine their long-term behavior and possible health risks., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Household garbage rooms release abundant bioaerosols and are an important source of pathogens; however, information on the distribution and survival patterns of pathogens in different waste components is limited. In this study, a culture method and 16S rRNA high-throughput sequencing were used to determine bacterial communities, culturable pathogens, and human bacterial pathogens (HBPs). The results showed that abundant culturable bacteria were detected in all waste types, and a large number of S. aureus was detected on the surface of recyclable wastes, whereas S. aureus, total coliforms, Salmonella, Enterococcus, and hemolytic bacteria were detected in food waste and other waste. The activities of these detected pathogenic bacteria decreased after 24 h of storage but re-activated within one week. Factors affecting the emergence of pathogens varied with different waste components. Sequencing results showed that Pseudomonas, Acinetobacter, and Burkholderia were abundant in the waste samples, whereas Achromobacter, Exiguobacteriums, Bordetella, and Corynebacterium were the primary pathogens in the bioaerosol and wall attachment. The results of traceability analysis showed that bioaerosol microbes were mainly derived from raw kitchen waste (5.98%) and plastic and paper contaminated with food waste (19.93%) in garbage rooms. In addition, bioaerosols were the main source of microflora in the wall attachment, which possessed high HBP diversity and required more attention. These findings will help in understanding the microbial hazards in different waste components and provide guidance for the control and risk reduction of bioaerosols during waste management and recycling., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Inc. All rights reserved.)

Exposure to bioaerosol contamination has detrimental effects on human health. Recent advances in ATP bioluminescence provide more opportunities for the quantitative detection of bioaerosols. Since almost all active organisms can produce ATP, the amount of airborne microbes can be easily measured by detecting ATP-driven bioluminescence. The accurate evaluation of microorganisms mainly relies on following the four key steps: sampling and enrichment of airborne microbes, lysis for ATP extraction, enzymatic reaction, and measurement of luminescence intensity. To enhance the effectiveness of ATP bioluminescence, each step requires innovative strategies and continuous improvement. In this review, we summarized the recent advances in the quantitative detection of airborne microbes based on ATP bioluminescence, which focuses on the advanced strategies for improving sampling devices combined with ATP bioluminescence. Meanwhile, the optimized and innovative strategies for the remaining three key steps of the ATP bioluminescence assay are highlighted. The aim is to reawaken the prosperity of ATP bioluminescence and promote its wider utilization for efficient, real-time, and accurate detection of airborne microbes., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Bioaerosols can be generated in wastewater treatment plants (WWTPs), they may contain pathogenic bacteria, cause disease transmission, and attract the public’s attention. In this study, bioaerosols were collected from seven different stages of an A²O process WWTP. The component characteristics were analyzed by bacterial culture and high-throughput sequencing. The correlations in different processes were analyzed, and the health risks of bioaerosols produced were evaluated. The results showed that the concentration range of bacteria aerosol in the WWTP was 75 CFU/m³−706 CFU/m³. The concentration range of total suspended particles was 111.13 µg/m³−211.67 µg/m³, the primary water-soluble ions were Ca²⁺ and Cl⁻. In the air of each stage, the main bacteria were Cetobacterium, Bacteroides, Romboutsia, and the fungi were Fusarium, Alternaria, and Aspergillus. The dominant bacteria in the wastewater were Cetobacterium, Romboutsia, Stenotrophobacter, and the fungi were Fusarium, Aspergillus, and Mortierella. The total bacterial concentration and ion concentration in the aerobic section of the biochemical tank were the highest. The results of species composition and principal component analysis showed that the bacterial composition in the air at different processes was similar, while the bacteria in wastewater differed significantly. Among them, the wastewater bacteria in the aerobic section of the biochemical tank were closer to that in the air. Fungal results were similar to bacteria but not prominent. The bioaerosol exposure risk results show that the risk in each stage was acceptable (5.15 ×10⁻⁴−6.47 ×10⁻³). However, the exposure risk of bioaerosol was calculated by the total bacterial concentration. In fact, some pathogenic microorganisms such as Escherichia coli and Aspergillus flavus were detected in bioaerosols, which may cause hemorrhagic colitis, cancer and other diseases by swallowing and inhalation. Therefore, the risk might be underestimated and should be a cause of concern.

Caused by the SARS-CoV-2 virus, Coronavirus disease 2019 (COVID-19) has been affecting the world since the end of 2019. While virus-laden particles have been commonly detected and studied in the aerosol samples from indoor healthcare settings, studies are scarce on air surveillance of the virus in outdoor non-healthcare environments, including the correlations between SARS-CoV-2 and other respiratory viruses, between viruses and environmental factors, and between viruses and human behavior changes due to the public health measures against COVID-19. Therefore, in this study, we collected airborne particulate matter (PM) samples from November 2019 to April 2020 in Bern, Lugano, and Zurich. Among 14 detected viruses, influenza A, HCoV-NL63, HCoV-HKU1, and HCoV-229E were abundant in air. SARS-CoV-2 and enterovirus were moderately common, while the remaining viruses occurred only in low concentrations. SARS-CoV-2 was detected in PM10 (PM below 10 µm) samples of Bern and Zurich, and PM2.5 (PM below 2.5 µm) samples of Bern which exhibited a concentration positively correlated with the local COVID-19 case number. The concentration was also correlated with the concentration of enterovirus which raised the concern of coinfection. The estimated COVID-19 infection risks of an hour exposure at these two sites were generally low but still cannot be neglected. Our study demonstrated the potential functionality of outdoor air surveillance of airborne respiratory viruses, especially at transportation hubs and traffic arteries.

Pathogenic bacteria and antibiotic resistance genes (ARGs) in bioaerosols are major threats to human health. In this study, the microbial community structure and ARG distribution characteristics of airborne bacteria in total suspended particulates (TSP) and PM2.5 were investigated under different air quality levels in Xinxiang, Central China. The results revealed that with the deterioration of air quality, the concentrations of airborne bacteria in both TSP and PM2.5 decreased; however, the relative amounts of pathogenic bacteria increased. The predominant genera in pathogenic bacteria of Bacillus, Sphingomonas, Corynebacterium, Rhodococcus, and Staphylococcus were identified in both TSP and PM2.5. Although the airborne bacteria concentrations and absolute abundances of ARGs in TSP were higher than those in PM2.5 under identical air quality conditions, the bacterial community structure and relative amounts of pathogenic bacteria were similar. In addition, the relationship between environmental factors of ions, metal elements, and meteorological parameters and the community structures of airborne bacteria and pathogenic bacteria were also analyzed. The effects of soluble ions and metal elements on several dominant genera of total bacteria and pathogenic bacteria differed, probably due to the strong tolerance of pathogenic bacteria to harsh atmospheric environments Different subtypes of ARGs showed various distribution characteristics with variations in air quality. The deterioration of air quality can inhibit the dissemination of ARGs, as the minimum values of all ARGs and class 1 integrase intI1 were observed under Severely Polluted conditions. This study provides a comprehensive understanding of the effect of air pollution levels on the airborne bacteria community composition and ARG distribution.

The atmosphere is a potential pathway for global-scale and long-range dispersal of viable microorganisms, promoting biological interconnections among the total environment. We aimed to provide relevant baseline information for long-range long-term intercontinental exchange of potentially infectious airborne microorganisms of major interest in environmental and health-related disciplines. We used an interannual survey (7-y) with wet depositions fortnightly collected above the boundary layer (free troposphere) at a remote high-elevation LTER (Long-Term-Ecological-Research) site, analyzed by 16S and 18S rRNA genes, and compared to a database of 475 well-known pathogens. We applied a conservative approach on close relatives of pathogenic species (>98% identity) standing their theoretical upper limit for atmospheric baseline relative abundances. We identified c. 2–3% of the total airborne microbiota as potential pathogens. Their most frequent environmental origins were soil, aquatic, and anthropogenic sources. Phytopathogens (mostly fungi) were the potential infectious agents most widely present. We uncovered consistent interannual dynamics with taxa foreseeable over time (i.e., predictable seasonal behavior) and under recurrent environmental scenarios (e.g., Saharan dust intrusions), respectively, being highly valuable microbial forensic environmental indicators. Up to 8 bacterial and 21 fungal genera consistently showed temporal abundances and recurrences unevenly distributed. Incidence of allergenic fungi was lower in summer, and significantly higher in spring. Close relatives to Coccidioides posadasii consistently showed higher signals (i.e., high specificity and high fidelity) in winter, whereas Cryptococcus neoformans had a significant signal in spring. Along Saharan dust intrusions, the bacterial phytopathogens Acidovorax avenae and Agrobacterium tumefaciens and the fungal phytopathogens Pseudozyma hubeiensis and Peniophora sp. consistently showed higher signals. Potential human pathogens showed low proportion, being mostly fungal allergens. Microorganisms related to obligated human, amphibian and fish pathogens were commonly found in winter. More studies in remote field sites above the boundary layer will unveil whether or not a similar trend is found globally.

Accurate measurements are critical for timely early warning and effective prevention of epidemics due to the continuing impact of bioaerosols on human health. In recent years, researchers have been focused on developing and calibrating online monitoring instruments. However, there is still a lack of laboratory-generated standard aerosol samples suitable for calibration. Therefore, in this study, we utilized a self-developed Ink Jet Aerosol Generator (H-IJAG) to achieve controllable generation of monodisperse aerosol standard particles. The Aerosol Particle Size Spectrometer (APSS, TOPAS 323) was employed as the particle detector. The diameter of the droplet was calculated by measuring the projected area of the droplet in the same image using Image-J software. Experimental results demonstrated that under standardized inkjet parameters, H-IJAG exhibited good reliability and reproducibility, and generated solid particles within (0.4-15) μm. To better simulate the laser-induced fluorescence emission properties of ambient bioaerosol, tryptophan (Trp) and 7-hydroxycoumarin-4-acetic acid (7-HCA) were selected as solutes of the laboratory-generated aerosol samples, which are known bio-fluorescent materials. According to the law of propagation of uncertainty, the relative uncertainty of the volume equivalent diameter of Trp and 7-HCA solid particles by H-IJAG were 0.42 %, while the relative uncertainty of the particle number concentrations of Trp and 7-HCA solid particles generated by H-IJAG were 1.4 %. This optimized IJAG technique provides a promising solution for the accurate calibration of bioaerosol monitors., Competing Interests: Declaration of competing interest We declare that we have no financial and personal relationships with other people or organizations that can inappropriately influence our works, and there is no professional or other personal interest of any nature or kind in any product, service, and/or company that could be construed as influencing the position presented in, or the review of, the manuscript., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Despite substantial research to profile the microbial characteristics in the atmosphere, the changing metabolism underpinning microbial successional dynamics remains ambiguous. Herein, we applied qPCR, high-throughput sequencing of the genes encoding 16S and ITS rRNA to render the bacterial/fungal dynamics of ambient PM2.5 filters maintained at constant conditions of temperature (20 ± 2 °C) and humidity (50 ± 5%). The incubation experiments which lasted for 50 days aim to simulate a metabolic process of microbe in two types PM2.5 (polluted and non-polluted). The results show that microbial community species in polluted PM2.5 had faster decay rates, more bacterial diversity and less fungal community compared to the non-polluted ones. For bacteria, the proportion of anaerobic species is higher than aerobic ones, and their performance of contain mobile elements, form-biofilms, and pathogenic risks declined rapidly as times went by. Whereas for fungi, saprotroph species occupied about 70% of the population, resulting in a specified peak of abundance due to the adequacy nutrients supplied by the apoptosis cells. Combining the classified microbial species, we found stable community structure and the volatile ones related to the various metabolic survival strategies during different time. Without the input of peripheral environment, the health risks of airborne microbe descend to a healthy level after 20 days, implying their biologic effectiveness was about 20 days no matter the air is polluted or not. This study provided new insights into the different metabolic survival of airborne microorganisms in ideal and stable conditions.

Introduction: Streptococcus suis is a zoonotic pathogen found in swine that may cause systemic infection in humans. S. suis is endemic in Southeast Asia and is the leading cause of adult meningitis in Vietnam. Given Vietnam's increasing centralization of the swine industry, we sought to estimate the prevalence of S. suis on large swine farms in Northern Vietnam. Methods: A cross-sectional, one-health-oriented, surveillance study for S. suis was conducted between October 2019–March 2020. Swine oral, swine worker nasal, and bioaerosol samples were collected from four large-scale swine farms (>500 swine) in three provinces in Northern Vietnam: Lao Cai, Bac Giang, and Quang Ninh. Samples were evaluated for presence of S. suis growth on blood agar plates and confirmed with conventional polymerase chain reaction. Results: The authors found that 4/174 (2.3%, 95% CI: 0.6–5.8%) of swine oral samples and 1/58 (1.7%, 95% CI: 0–9.2%) bioaerosol samples were positive for S. suis by bacterial culture and conventional PCR. S. suis was not detected in any swine worker nasal wash samples. There was no significant relationship between sampling location and month of sample collection with results of swine oral or bioaerosol samples. Conclusion: Compared to previous reports from slaughterhouses in Vietnam, the lower than expected prevalence of S. suis, supports the notion that that recent efforts to centralize Vietnam's pork industry through establishment of large-scale farms with better biosecurity may have been effective in limiting S. suis prevalence on these large farms.

Airborne pollen causes various types of allergies in humans, and the extent of allergic infection is related to the presence of different types of sporo–pollen and existing meteorological conditions in a certain area. Therefore, an aeropalynological study of 72 airborne samples with a hydrofluoric acid (HF) treatment was conducted in the Haizhu district of Guangzhou, China, in 2016, to identify the temporal variations in airborne sporo–pollen and the relationship between airborne sporo–pollen concentrations and different meteorological variables in Guangzhou, China. Forty-five types of airborne pollen, seven types of airborne spores, and some undetermined sporo–pollen taxa were identified with two separate plant habitats occurring during this period (from January to December 2016): arboreal pollen (tree-based) and non-arboreal pollen (herb, shrub, aquatic, liane, etc.). Furthermore, the daily records of four key meteorological variables (temperature, precipitation, relative humidity, and wind speed) were acquired to distinguish the pollen seasons and correlated with Spearman's rho test to establish a pollen-weather data book with the seasonal variations. The two leading seasons were identified based on pollen abundance: spring and autumn. Among them, the primary dominant sporo–pollen families during the spring season were Poaceae, Pinaceae, Euphorbiaceae, Moraceae, Microlepia sp., and Polypodiaceae. Conversely, Artemisia sp., Asteraceae, Cyperaceae, Poaceae, Alnus sp., Corylus sp., Myrtaceae, and Rosaceae were the dominant pollen species during autumn. However, few pollen grains were identified in January, May–July, and December. The statistical analysis revealed that temperature had both positive and negative correlations with sporo–pollen concentrations. However, precipitation and relative humidity had a strong impact on the sporo–pollen dispersion and exhibited a negative correlation with the sporo–pollen concentrations. The wind speed had a positive but strong correlation with the sporo–pollen concentration during the study period. Some inconsistent results were found due to environmental variations, vegetation type, and climate change around the study area. This study will facilitate the identification of pollen seasons to prevent the occurrence of pollen-related allergies in the Guangzhou city area.

This study explored the assembly mechanisms and physicochemical dynamics of microbial communities within atmospheric bioaerosols, focusing on the influence of different aerial trajectories. Over two years, samples near Seoul were classified into 'North', 'Southwest', and 'Others' categories based on their aerial trajectories. Physicochemical analysis of the PM 2.5 particles revealed distinct ion compositions for each cluster, reflecting diverse environmental influences. Microbial community analysis revealed that shared dominant bacterial phyla were present in all clusters. However, distinct taxonomic profiles and biomarkers were also evident, such as coastal bacteria in the 'Southwest' cluster correlating with wind speed, and arid soil-originated bacteria in the 'North' cluster correlating with cations. These findings demonstrate that biomarkers in each cluster are representative of the distinct environments associated with their aerial trajectories. Notably, cluster 'Southwest' the highest microbial diversity and a strong alignment with the neutral community model, suggesting a large influence of passive dispersal from marine environments. Contrarily, 'North' and 'Others' were more influenced by niche-dependent factors. This study highlights the complex interplay between environmental factors and microbial dynamics in bioaerosols and provides important insights for environmental monitoring and public health risk assessment., Competing Interests: Declaration of competing interest The authors declare no conflict of interest., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Bioaerosols produced during animal production have potential adverse effects on the health of workers and animals. Our objective was to investigate characteristics, antibiotic-resistance genes (ARGs), and health risks of bioaerosols in various animal barns. Poultry and swine barns had high concentrations of airborne bacteria (11156 and 10917 CFU/m 3 , respectively). Acinetobacter, Clostridium sensu stricto, Corynebacterium, Pseudomonas, Psychrobacter, Streptococcus, and Staphylococcus were dominant pathogenic bacteria in animal barns, with Firmicutes being the most abundant bacterial phylum. Based on linear discriminant analysis effect size (LEfSe), there were more discriminative biomarkers in cattle barns than in poultry or swine barns, although the latter had the highest abundance of bacterial pathogens and high abundances of ARGs (including tetM, tetO, tetQ, tetW sul1, sul2, ermA, ermB) and intI1). Based on network analyses, there were higher co-occurrence patterns between bacteria and ARGs in bioaerosol from swine barns. Furthermore, in these barns, relative abundance of bacteria in bioaerosol samples was greatly affected by environmental factors, mainly temperature, relative humidity, and concentrations of CO 2 , NH 3 , and PM 2.5 . This study provided novel data regarding airborne bio-contaminants in animal enclosures and an impetus to improve management to reduce potential health impacts on humans and animals., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier Inc. All rights reserved.)

Airborne biological aerosols (also called bioaerosols) are found in various environmental and occupational settings. Among these, pathogenic bioaerosols can cause diseases such as legionellosis, influenza, measles, and tuberculosis. To prevent or minimize people's exposure to these pathogenic bioaerosols in the field, a rapid detection method is required. In this study, a size-selective bioaerosol (SSB) sampler was combined with the immunochromatographic assay (ICA). The SSB sampler can collect bioaerosols on the sampling swab and the lateral flow test kit used in ICA can rapidly detect the pathogens in bioaerosols collected on the swab. Before testing the combined method, the lower limit of detection (LOD) of the lateral flow test kit was determined. Legionella pneumophila (L. pneumophila) was used as a target pathogen. The results show that at least 1.3 × 10 3 L. pneumophila cells are required to be detected by the lateral flow test kit. To test the developed method, L. pneumophila suspension was aerosolized in the sampling chamber and collected using two SSB samplers with different sampling times (10 and 20 min). The developed method could detect aerosolized L. pneumophila and also estimate the concentrations from the lower LOD, sampling time, and formation of a positive line on a test strip. When positive results were obtained from sampling for 10 min and 20 min, concentrations of respirable L. pneumophila were estimated ≥5.2 × 10 4 CFU resp /m 3 and ≥2.6 × 10 4 CFU resp /m 3 , respectively. The conventional sampler Andersen impactor with colony counting was also used for comparison. In all cases, the estimated concentrations obtained by the developed method were higher than those obtained by the conventional method. These findings confirm that the developed method can overcome the limitations of conventional methods and eventually benefit environmental and occupational health by providing a better method for risk assessment., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: Jae Hong Park reports financial support was provided by National Institute for Occupational Safety and Health. Li Liao reports financial support was provided by National Institute for Occupational Safety and Health. If there are other authors, they declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Wastewater treatment plants (WWTPs) are the leading sources of potential pathogenic bioaerosol that cause non-negligible health risks. However, bioaerosolization behaviour of potential pathogenic microorganisms (PPMs) migrating from wastewater to the atmosphere is still unclear. This study investigated the occurrence profile of PPMs in wastewater, sludge and bioaerosol, then analyzed bioaerosolization level, impact factors and social function. Staphylococcus aureus was selected as the target due to its pathogenicity, and the health risks of workers, engineers and researchers wearing various masks (N90, N95 and medical masks) were evaluated. The results showed that there were 38 and 64 PPMs in bioaerosol from plant A and B. Streptomyces in plant A (average bioaerosolization index, BI= 237.71) and Acinetobacter in plant B (average BI = 505.88) were more likely to migrate from wastewater to the atmosphere forming bioaerosol. Environmental factors (relative humidity, wind speed and temperature) affected both BI and microbial species of PPMs in different ways. PPMs related to fermentation, aerobic chemoheterotrophy, and chemoheterotrophy are the most abundant. Meanwhile microbial networks from plants A and B showed that PPMs were well-connected. Emission level of Staphylococcus aureus bioaerosol can reach 980 ± 309.19 CFU/m 3 in plant A and 715.55 ± 44.17 CFU/m 3 in plant B. For three exposure population, disease burden (DB) and annual probability infection (Py) of Staphylococcus aureus bioaerosol in two plants were both higher than the U.S.EPA benchmark (10 -4 DALYs pppy). All three masks (N90,N95 and medical masks) can decrease Py and DB by at least one order of magnitude. This study illustrated the bioaerosolization behaviour of PPMs comprehensively, which provides a scientific basis for exposure risk prevention and control., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Although pig farms are hotspots of antibiotic resistance due to intensive use of antibiotics, little is known about the abundance, diversity and transmission of airborne antibiotic resistance genes (ARGs). This study reports that bioaerosol is an important spread route of ARGs in pig farms. ARGs, mobile genetic elements (MGEs), and bacterial communities were investigated in both air and feces samples during winter and summer. The average concentration of airborne ARGs and MGEs during winter is higher than that during summer when using the ventilation system. The tetM is identified as the predominant airborne ARG with abundance of 6.3 ± 1.2 log copies/m3. Clostridium and Streptococcus are two dominant bacteria and several opportunistic pathogens are detected in air samples. High temperature is favorable for more diverse bacterial communities, but relative humidity has negative effects. The wind speed promotes the spread of airborne ARGs. The network analysis results show the average fecal contribution to airborne bacteria is 19.9% and 59.4% during summer and winter, respectively. Horizontal gene transfer plays an important role in the dissemination of airborne ARGs during winter (77.8% possibility), while a lower possibility of 12.0% in summer.

Plastic particles have become ubiquitous in various environmental compartments, with the atmosphere being the least explored of these. Furthermore, the way atmospheric plastics affect terrestrial biological systems has not been evaluated to the same extent as for aquatic ecosystems. Plastics are even found in human lungs, and hence their adverse effects on the respiratory system are one of the many purported human health impacts. In this review, we discuss the ability of suspended atmospheric plastics to act as a potential fomite for microbes in addition to their emerging influence on climatic activity. Atmospheric plastics can interact with solar radiation, produce greenhouse gases, and influence the carbon cycle, thereby becoming a prominent factor affecting climate change processes. Microbe-laden bioaerosols can adhere to plastic particles enabling long-distance travel and directly making way to the airway and lungs. The efficiency of these pathways in spreading microbial or viral infections can be examined once sufficient data regarding the spatial dynamics of any airborne pathogen transmission is available. Astute investigations on atmospheric plastics and their complex interactions in the earth system are needed.

Drug-resistant and pathogenic Staphylococcus spp. strains can reach surface waters and air with wastewater evacuated to the environment. These strains increase the environmental pool of genetic determinants conferring antibiotic resistance and virulence, and constitute a health risk for the employees of wastewater treatment plants (WWTP) who come into daily contact with bioaerosols. The aim of this study was to identify the genetic determinants of drug resistance and virulence in Staphylococcus spp. strains isolated from untreated (UWW) and treated wastewater (TWW), an activated sludge (AS) bioreactor, river water collected upstream and downstream from the wastewater discharge point (URW and DRW), and WWTP employees. All isolates were analysed for the presence of the rpoB gene, and were subjected to clonal analysis by ERIC fingerprinting. As a result, 249 of the 455 analysed isolates were selected for PCR. The presence of the gene encoding nuclease activity in S. aureus (nuc), the methicillin resistance gene (mecA), vancomycin resistance gene (vanA), antiseptic resistance gene (qacA/B) and virulence genes (sasX, pvl, tst1, hla, sec) was determined. The prevalence of nuc, mecA, vanA and qacA/B genes in wastewater and river water was determined by quantitative PCR (qPCR). In the group of strains isolated from wastewater and water samples, 63% were identified as S. aureus, and 20% of the strains carried the vanA gene. The hla virulence gene was present in 80% of the isolates, and the pvl gene was detected in 27% of the isolates. In the group of strains isolated from the employees, 82% were identified as S. aureus, and the presence of vanA and mecA genes was confirmed in 14% and 16% of the isolates, respectively. The most prevalent virulence gene was hla (74%), whereas pvl was observed in 43% of the isolates. The quantitative analysis revealed the highest concentrations of the studied genes in UWW samples, at 2.56x104 gene copies/ml for nuc, 1.18x103 gene copies /ml for mecA, 8.28x105 gene copies /ml for vanA and 3.83x105 gene copies /ml for qacA/B. Some of analysed genes were identified in the isolates from both URW and DRW samples, as well as in genomic DNA of these samples. These results indicate that wastewater is not effectively treated in the analysed WWTP, which could contribute to the dissemination of antibiotic resistance genes (ARGs) and antibiotic-resistant bacteria (ARB) to the environment. An analysis of the genetic relatedness of selected isolates revealed clusters of strains originating from UWW samples, AS samples and the employees. These observations suggest that ARGs and ARB are transmitted by wastewater bioaerosols to the upper respiratory tract mucosa of the plant’s employees, thus increasing their exposure to infectious factors.

Laparoscopy of COVID-19-infected/suspected patients needs to be performed with the utmost care due to the chances of virus carryover through the pneumoperitoneum gas. In this study, polysulfone/polyvinyl-pyrrolidone hollow fiber membranes (HFMs) were fabricated by phase inversion process, and these HFMs were bundled into a module consisting of tortuous, circular-helical arrangement. Further, copper (Cu) and zinc (Zn) nanoparticles (NPs), known to have antimicrobial and antiviral properties, were flow-coated on the lumen side of the HFMs. To test functional efficiency, the modules were challenged with wet aerosol and bioaerosols. Wet aerosol removal efficiency was ∼98%. Bioaerosol-containing bacteria E. coli strain K-12, showed 2.6 log (∼99.8%), and 2.1 log (∼99.3%) removal efficiency for Cu NPs and Zn NPs coated HFMs modules, respectively, and 1.6 log (∼97%) removal for plain (uncoated) HFMs. Bioaerosols containing SARS-CoV-2 surrogate virus (MS2 bacteriophage) showed ∼5-7 log reduction of bacteriophage for plain HFMs, 3.9 log, and 2.3 log reduction for Cu and Zn coated HFMs, respectively. The flow of aerosols entirely through the HFM lumen helps in attaining a low ΔP of < 1 mm Hg, thus rendering its usefulness, particularly for exhausting pneumoperitoneum gases where high upstream pressures could lead to barotrauma. STATEMENT OF ENVIRONMENTAL IMPLICATION: Surgical smoke is generated during minimally invasive surgical (MIS) procedure such as laparoscopy when electrosurgical devices are used to cut any tissues. This smoke is a hazard as it contains toxic volatile compounds, mutagens, carcinogens, bacteria, and virus-laden aerosols. Infection to healthcare professionals through the bioaerosols containing smoke is well reported in literature. The limitation of using hypochlorite and pleated/HEPA filter, led us to design a low pressure drop bioaerosol filter, which can remove smoke, tissue fragments, and COVID-19 virus. It provides a much safer operation theatre environment during MIS procedures as well as in general for bioaerosol removal., Competing Interests: Declaration of Competing Interest The authors declare the following financial interests/personal relationships, which may be considered as potential competing interests: Prof. Jayesh Bellare, Preety Kumari, Snehasis Biswas, Krishnamurthy Sainath, has patent #HOLLOW FIBER MEMBRANES-BASED LOW DELTA-P BIOAEROSOL FILTER TO REMOVE SMOKE, TISSUE FRAGMENTS AND VIRUS (202221063082) pending to IIT Bombay (Assignee)., (Copyright © 2023 Elsevier B.V. All rights reserved.)

Bioaerosols generated from sludge treatment processes in wastewater treatment plants (WWTPs) may spread infectious diseases. This study investigated the generation characteristics, source, and associated risks of bioaerosols produced during sludge treatment processes. The results showed that the concentration range of total suspended particles was 49 ± 3 to 354 ± 10 μg/m 3 , and the primary water-soluble ions in bioaerosols were NH 4 + , SO 4 2- and Cl - . The bacterial concentration in bioaerosols was 50 ± 5 to 1296 ± 261 CFU/m 3 , with the highest concentration in the biochemical reaction tank. The dominant bacteria in bioaerosols included Bacteroides, Cetobacterium, Romboutsia, Lactobacillus and Turicibacter, while the dominant fungi were Aspergillus, Alternaria, Cladosporium and Fusarium. Pathogenic microorganisms such as Escherichia and Aspergillus were detected in all treatment processes. The results of principal component analysis showed that the bacterial composition in bioaerosols was similar of different technological processes, while the fungal species composition was different. The dominant microbial composition of sludge and bioaerosols was relatively close. The Source Tracker results indicated that sludge was the main source of airborne bacteria in the sludge dewatering house, as well as the main source of airborne fungi in the plate-frame pressure filtration tank and the sloping plate sedimentation tank. The non-carcinogenic risk in each stage was low (1.22 × 10 -9 -3.99 × 10 -2 ). However, Bugbase phenotype prediction results showed that the bioaerosols in the anaerobic sedimentation tank may have potential pathogenicity. Therefore, the management and control of bioaerosols from the sludge treatment should be strengthened., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

Potential airborne human pathogens (PAHPs) may be a relevant component of the air microbiome in built environments. Despite that PAHPs can cause infections, particularly in immunosuppressed patients at medical centers, they are scarcely considered in standards of indoor air quality (IAQ) worldwide. Here, we reviewed the current information on microbial aerosols (bacteria, fungal and viruses) and PAHPs in different types of built environments (e.g., medical center, industrial and non-industrial), including the main factors involved in their dispersion, the methodologies used in their study and their associated biological risks. Our analysis identified the human occupancy and ventilation systems as the primary sources of dispersal of microbial aerosols indoors. We also observed temperature and relative humidity as relevant physicochemical factors regulating the dispersion and viability of some PAHPs. Our analysis revealed that some PAHPs can survive and coexist in different environments while other PAHPs are limited or specific for an environment. In relation to the methodologies (conventional or molecular) the nature of PAHPs and sampling type are pivotal. In this context, indoors air-borne viruses are the less studies because their small size, environmental lability, and absence of efficient sampling techniques and universal molecular markers for their study. Finally, it is noteworthy that PAHPs are not commonly considered and included in IAQ standards worldwide, and when they are included, the total abundance is the single parameter considered and biological risks is excluded. Therefore, we propose a revision, design and establishment of public health policies, regulations and IAQ standards, considering the interactions of diverse factors, such as nature of PAHPs, human occupancy and type of built environments where they develop., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier B.V. All rights reserved.)

Characterizing pollen release and dispersion processes is fundamental for knowledge advancement in ecological, agricultural and public health disciplines. Understanding pollen dispersion from grass communities is especially relevant due to their high species-specific allergenicity and heterogeneously distributed source areas. Here, we aimed to address questions concerning fine level heterogeneity in grass pollen release and dispersion processes, with a focus on characterizing the taxonomic composition of airborne grass pollen over the grass flowering season using eDNA and molecular ecology methods. High resolution grass pollen concentrations were compared between three microscale sites (<300 m apart) in a rural area in Worcestershire, UK. The grass pollen was modelled with local meteorology in a MANOVA (Multivariate ANOVA) approach to investigate factors relevant to pollen release and dispersion. Simultaneously, airborne pollen was sequenced using Illumina MySeq for metabarcoding, analysed against a reference database with all UK grasses using the R packages DADA2 and phyloseq to calculate Shannon's Diversity Index (α-diversity). The flowering phenology of a local Festuca rubra population was observed. We found that grass pollen concentrations varied on a microscale level, likely attributed to local topography and the dispersion distance of pollen from flowering grasses in local source areas. Six genera (Agrostis, Alopecurus, Arrhenatherum, Holcus, Lolium and Poa) dominated the pollen season, comprising on average 77 % of the relative abundance of grass species reads. Temperature, solar radiation, relative humidity, turbulence and wind speeds were found to be relevant for grass pollen release and dispersion processes. An isolated flowering Festuca rubra population contributed almost 40 % of the relative pollen abundance adjacent to the nearby sampler, but only contributed 1 % to samplers situated 300 m away. This suggests that most emitted grass pollen has limited dispersion distance and our results show substantial variation in airborne grass species composition over short geographical scales., Competing Interests: Declaration of competing interest The authors declare that they do not have any inappropriate financial or personal relationships that would bias or influence the research in this paper., (Crown Copyright © 2023. Published by Elsevier B.V. All rights reserved.)

Bioaerosols in different built environments and climate zones have unique effects on occupant health, which demands comparisons of their characteristics to make targeted control measures. This study investigated bioaerosol distribution in five different climate zones across China with four building types (n = 686 rooms). The results showed significant disparities in bioaerosol concentrations among various buildings and climate zones. The bacterial concentrations in residences (536 ± 647 CFU/m 3 ) were significantly higher than in schools, offices, and hospitals owing to different built environments and human activities. The highest mean value of fungal concentration was found in schools (826 ± 955 CFU/m 3 ) due to their greater landscaping area. The bacterial concentrations in the cold zone (307 ± 506 CFU/m 3 ) and the hot summer and cold winter zone (214 ± 180 CFU/m 3 ) were significantly lower than in the other three climate zones. The fungal concentrations in the severe cold zone (709 ± 900 CFU/m 3 ) and the hot summer and warm winter zone (1094 ± 832 CFU/m 3 ) were significantly higher than in the other three climate zones; the lower the indoor temperature (T) and the higher the air exchange rate, the lower the indoor airborne bacterial concentration; the lower the relative humidity (RH), the lower the indoor airborne fungi. In addition, a higher air exchange rate could also reduce the effect of occupant density on indoor bacterial concentration. The results of this study provide valuable data on bioaerosol profiles in various built environments and climate zones and highlight the significance of T, RH, and air exchange rate on indoor bioaerosol concentrations., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier B.V. All rights reserved.)

The composition and concentration of airborne microorganisms in hospital indoor air has been reported to contain airborne bacteria and fungi concentrations ranged 10 1 -10 3  CFU/m 3 in inpatients facilities which mostly exceed recommendations from the World Health Organization (WHO). In this work, a deeper knowledge of the performance of airborne microorganisms would allow improving the designs of the air-conditioning installations to restrict hospital-acquired infections (HAIs). A solution containing Escherichia coli (E. coli) as a model of airborne bacteria was nebulized using the Collison nebulizer to simulate bioaerosols in various hospital areas such as patients' rooms or bathrooms. Results showed that the bioaerosol source had a significant influence on the airborne bacteria concentrations since 4.00 10 2 , 6.84 10 3 and 1.39 10 4  CFU mL -1 were monitored during the aerosolization for 10 min of urine, saliva and urban wastewater, respectively. These results may be explained considering the quite narrow distribution profile of drop sizes around 1.10-1.29 μm obtained for urban wastewater, with much vaster distribution profiles during the aerosolization of urine or saliva. The airborne bacteria concentration may increase up to 10 7  CFU mL -1 for longer sampling times and higher aerosolization pressures, causing several cell damages. The cell membrane damage index (I D ) can vary from 0 to 1, depending on the genomic DNA releases from bacteria. In fact, the I D of E. coli was more than two times higher (0.33 vs. 0.72) when increasing the pressure of air flow was applied from 1 to 2 bar. Finally, the ventilation air flow also affected the distribution of bioaerosols due to its direct relationship with the relative humidity of indoor air. Specifically, the airborne bacteria concentration diminished almost below 3-logs by applying more than 10 L min -1 during the aerosolization of urine due to their inactivation by an increase in their osmotic pressure., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier Inc. All rights reserved.)

The accelerating occurrence and environmental dissemination of bacteria, gas pollutants and antibiotic resistance genes (ARGs) in aerosols of poultry farms have become emerging environmental issues due to their potential threat to animals, workers, and the communities located near such farms. Here, aerosol samples were gathered from inside and outside of the chicken house in winter with a transportable high-flow bioaerosol sampler. Then, 16S rRNA gene amplicon sequencing was used to categorize the bacteria in air samples, and the abundance of 12 ARG subtypes was researched via the real-time quantitative polymerase chain reaction (qPCR). Results indicated that the bacterial richness and diversity and total absolute abundance of ARGs were similar in the bioaerosols from indoor and downwind site of the poultry farm. The zoonotic pathogens, Staphylococcus and Corynebacterium, were detected both inside and outside of the chicken house, and the four most abundant target genes were bla TEM , tetQ, ermB and sul1 in aerosols. Moreover, the correlation between the bacterial communities and environmental factors, such as NH 3 and H 2 S concentrations, wind speed, temperature and relative humidity, was analyzed. The result revealed that the indoor bacteria community was positively associated with temperature and concentrations of air pollutants (NH 3 and H 2 S), and could spread from confinement buildings to the ambient atmosphere through wind. In addition, the network analysis result showed that the airborne bacteria might significantly contribute in shaping the ARGs' profiles in bioaerosol from inside and outside of the poultry house. Overall, our results revealed the airborne bacterial communities and their associated influencing factors in the micro-environment (inside of the chicken house and nearby the boundary of the farm), and brought a new perspective for studying the gas pollutants and bioaerosol from poultry farms in winter., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 Elsevier B.V. All rights reserved.)

Bioaerosol is a new type of pollutant, which is related to the spread of many diseases. In particular, the bioaerosol produced in the hospital sewage treatment process contains many pathogenic bacteria, which will impact patients and surrounding residents. In this study, the biochemical tank (BRT) of the hospital sewage treatment station (HSTS) and municipal wastewater treatment plant (MWTP) were used as sampling points. The results showed that the concentration of bacteria (1843 CFU/m 3 ) in bioaerosol produced by BRT of HSTS was higher than that in the air at BRT of MWTP (1278 CFU/m 3 ). The proportion of small-size bacteria (<3.3 µm) in the air of HSTS and MWTP was similar. However, the abundance of small-size pathogenic bacteria in HSTS was higher than that in MWTP, such as Acinetobacter and Arcobacter. The dominant bacteria in HSTS and MWTP were different under different particle sizes. The dominant bacterial genera of bioaerosol in HSTS under different particle sizes were similar (Acinetobacter, Arcobacter, Comamonas); There were significant differences in the dominant bacterial genera of bioaerosol in MWTP under different particle sizes. The dominant strains with particle sizes ranging from 0 ∼ 0.43 µm were Acinetobacter (23.22%). Kocuria (15.13%) accounted for a relatively high proportion in the aerosol of 0.43 µm ∼ 0.65 µm. The dominant strains with particle sizes of 0.65 µm ∼ 1.1 µm and 1.1 µm ∼ 2.1 µm were relatively single, and Exiguobacterium and Paenibacillus accounted for 51.51% and 60.15%, respectively. Source tracker showed that most of the pathogenic bacteria in bioaerosols came from sewage. One hour later, the concentration of particulate matter in the place 200 m away from BRT of HSTS (1 × 10 -10 mg/m 3 ) was higher than that in MWTP (1 × 10 -11 mg/m 3 ). The hazard quotient (HQ) of people around HSTS (HQ male : 1.70 × 10 -1 ; HQ female : 1.36 × 10 -1 ) was higher than that of MWTP (HQ male : 1.18 × 10 -1 ; HQ female : 9.40 × 10 -2 ). Pathogenic bacteria (Acinetobacter, Arcobacter) were detected in HSTS and MWTP and the BugBase phenotype prediction results showed potential pathogenicity. More attention should be paid to the protection of the people. It is suggested to strengthen the air sterilization treatment near HSTS according to the diffusion trajectory of bioaerosol, and the surrounding personnel should wear N95 and other protective masks., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022 The Authors. Published by Elsevier Inc. All rights reserved.)

Pollen grains may contain allergens that exacerbate allergic respiratory diseases like asthma and rhinitis. In the presence of water, pollen grains (10-100 μm) can rupture to produce sub-pollen particles (SPP) with diameters <2.5 μm, which in comparison to intact pollen grains, have longer atmospheric lifetimes and greater penetration to the lower lung. The current study examines SPP, fungal spores, and bacteria in size-resolved atmospheric particulate matter (PM) using chemical and biological tracers. During springtime tree pollen season in Iowa City, Iowa, fine particle (PM 2.5 ) concentrations of fructose (a pollen chemical tracer) increased on rainy sampling periods, especially during severe thunderstorms, and peaked when a tornado struck nearby. Submicron fluorescent particles, measured by single-particle fluorescence spectroscopy, were also enhanced during rain events, particularly thunderstorms in agreement with the chemical tracer measurements. PM 2.5 sucrose (a pollen chemical tracer) concentrations were higher in early spring when nighttime temperatures were closer to freezing, while fructose concentrations were higher in late spring with warmer temperatures, consistent with chemical tracers being sensitive to seasonal temperature influences. The first co-located measurements of fructose and Bet v 1 (birch pollen allergen), indicated that SPP ranged in diameter from <0.25 to 2.5 μm during rainy sampling periods and that allergens and carbohydrates exhibited distinct size distributions. Meanwhile, mannitol (a fungal spore tracer) peaked on warm, dry days following rain and was primarily in supermicron particles (>1.0 μm), which is consistent with intact fungal spore diameters (1-30 μm). Bacterial endotoxins in PM also increased during extreme weather events, primarily in supermicron particles. While the concentrations of fructose, mannitol, and endotoxin all increased in PM 2.5 μm during thunderstorms, the greatest relative increase in concentration was observed for fructose. Together, these observations suggest that SPP containing starch granules and allergens (Bet v 1) were released during rainy sampling periods. This study advances the use of chemical tracers to track SPP and other bioaerosols in the atmosphere, by providing new insight to their size distribution and response to extreme weather conditions., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.

The antibiotics and antibiotic resistance genes (ARGs) have caused pollution of livestock farm environments. There are limited investigations about airborne ARGs and what role the antibiotics play remains largely unclear. The dynamics of various antibiotics were compared between feces samples from chicken fed a diet with and without antibiotics. In contrast to the farm with no antibiotics drugs, the hazard quotients (HQs) of OTC (24.8-205.4) and CTC (18.0-317.0) are particularly high in the farm with in-feed antibiotics drugs. The high ecological risks of antibiotics in chicken feces with in-feed antibiotic drugs were 100 % as determined. We quantified mobile genetic elements (MGEs) and ARGs and investigated bacterial communities in feces and air samples. The concentration of airborne ARG/MGE subtypes with in-feed antibiotic drugs is about two orders of magnitude higher than those without drugs. This study reveals that the indoor air of chicken farms is a reservoir of ARGs in the environment. Continuous feeding of antibiotics can change the intestinal microbial community structure of the chicken. The possibility of horizontal gene transfer of ARGs in air and feces samples might be increased by in-feed antibiotic drugs. The enrichment of ARGs in the chicken farm can be reduced by minimizing antibiotic use., (Copyright © 2022. Published by Elsevier B.V.)

Bioaerosols can be generated in wastewater treatment plants (WWTPs), they may contain pathogenic bacteria, cause disease transmission, and attract the public's attention. In this study, bioaerosols were collected from seven different stages of an A²O process WWTP. The component characteristics were analyzed by bacterial culture and high-throughput sequencing. The correlations in different processes were analyzed, and the health risks of bioaerosols produced were evaluated. The results showed that the concentration range of bacteria aerosol in the WWTP was 75 CFU/m³-706 CFU/m³. The concentration range of total suspended particles was 111.13 µg/m³-211.67 µg/m³, the primary water-soluble ions were Ca²⁺ and Cl⁻. In the air of each stage, the main bacteria were Cetobacterium, Bacteroides, Romboutsia, and the fungi were Fusarium, Alternaria, and Aspergillus. The dominant bacteria in the wastewater were Cetobacterium, Romboutsia, Stenotrophobacter, and the fungi were Fusarium, Aspergillus, and Mortierella. The total bacterial concentration and ion concentration in the aerobic section of the biochemical tank were the highest. The results of species composition and principal component analysis showed that the bacterial composition in the air at different processes was similar, while the bacteria in wastewater differed significantly. Among them, the wastewater bacteria in the aerobic section of the biochemical tank were closer to that in the air. Fungal results were similar to bacteria but not prominent. The bioaerosol exposure risk results show that the risk in each stage was acceptable (5.15 ×10⁻⁴-6.47 ×10⁻³). However, the exposure risk of bioaerosol was calculated by the total bacterial concentration. In fact, some pathogenic microorganisms such as Escherichia coli and Aspergillus flavus were detected in bioaerosols, which may cause hemorrhagic colitis, cancer and other diseases by swallowing and inhalation. Therefore, the risk might be underestimated and should be a cause of concern., (Copyright © 2022 The Authors. Published by Elsevier Inc. All rights reserved.)

Bioaerosol as an important medium has aroused widespread concern on its potential hazards in disease transmission and environment biosafety. However, little is known about the duration and self-decay of airborne bacteria in the atmosphere environment. Further, the self-decay process is proposed to include biological-decay and physical-decay. At present, there are many reports on the bacteria apoptosis mechanism and airborne particle migration. However, few studies focus on self-decay during the physical movement of airborne bacteria. The present study investigated self-decay laws and efficiencies of airborne bacteria in the sealed reactor under room temperature (18 ± 2 °C, RT) and low temperature (3 ± 2 °C, LT). The self-decay rate constants of 0.0089, 0.0133, 0.0092, and 0.0122 min -1 were obtained under RT-E. coli, LT-E. coli, RT-S. aureus and LT-S. aureus, respectively. There was no significant difference between the self-decay efficiency of gram-negative and gram-positive bacteria under the same conditions. Nevertheless, gram-negative bacteria were more sensitive to temperature change compared with gram-positive bacteria, where the self-decay efficiency of gram-negative under LT was 49% higher than that under RT, and the value of gram-positive was 32% at the same condition. Furthermore, the laws of biological-decay and physical-decay conformed to the first-order kinetic model by theoretical derivation. Biological-decay accounted for 59.5% at RT and 88.5% at LT among self-decay, which is mainly caused by energy absorption, environmental stress, and bacterial structure changes. Physical-decay mainly caused by gravity settlement accounting for 40% at RT and 10% at LT among self-decay, approximately. Meanwhile, the influence of environmental factors on self-decay was mainly reflected in the biological-decay process. Overall, it is of great significance for clarifying the changing laws of bioaerosol and controlling the transmission of airborne bacteria., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2022. Published by Elsevier B.V.)