Search

A beam optics study using the ITER-relevant high intense negative ion beams, such as 1 MeV, 200 A/m2, has been performed experimentally and analytically using a multi-aperture and five-stage accelerator. Initially, multi-beamlets generated from this accelerator were deflected in various directions due to the magnetic field and space charge repulsion between beams and showed various divergences. These had limited the pulse length and the beam energy. Compensation methods of the beamlet deflections have worked effectively and contributed to achieving the ITER requirement, the divergence angle of <7 mrad, and the deflection angle of <1 mrad for 1 MeV beam. The beam pulse has been gradually extended from 1 to 100 s and is now going to a longer pulse based on these results. One of the remaining issues is to understand and suppress peripheral components of the beam, namely, the halo, and to reduce the local heat loads observed around the aperture edge. This halo component has been successfully distinguished from the beam core by using a newly developed beam emittance measurement system for high intense beams. By combining this measured beam emittance and the beam simulation, it was clarified for the first time that the halo components are generated in an area of 1 mm width from the aperture edge. [ABSTRACT FROM AUTHOR]

Spatial non-uniformity of the dissociative hydrogen atom (H0) production has been investigated in a large negative ion source (JAEA 10 A source) with the electron energy distribution function (EEDF) obtained by a Monte-Carlo simulation code for electron transport in 3D3V (three dimensional real and velocity) space. It has been shown that the H0 production rate becomes larger in the upper region (one side in the longitudinal direction) of the source chamber. This spatial non-uniformity of the H0 production profile is mainly explained by the non-equilibrium features of the EEDF in the upper region, i.e., the EEDF consists of thermal electron component with kinetic energy [variant_greek_epsilon] < 25 eV and fast electron component with energy [variant_greek_epsilon] > 25 eV in the upper region, while the EEDF mainly consists of only thermal electrons in the bottom region. These characteristics for the EEDF and the energy dependence of cross-sections for dissociation and dissociative ionization processes lead to the non-uniform profile of the H0 production. The above numerical results of the spatial H0 non-uniformity are validated and confirmed by comparisons with those by spectroscopic measurement. It has been clarified that the non-equilibrium (fast electron) component of the EEDF has a large contribution to the non-uniformity of the H0 production rate. [ABSTRACT FROM AUTHOR]

To realize stable negative ion beams for 100 s required in the neutral beam injector of JT-60SA, a physical model to control cesium (Cs) distribution inside the negative ion source has been developed in order to maintain the stable negative ion production at the plasma grid (PG) surface with Cs. In this work, to quantitatively evaluate Cs coverage on the PG, a three-dimensional Cs transportation code was introduced to consider the spatial Cs distribution in the source. The spatial temperature distribution of the chamber wall was also introduced in this model. As a result, the reasonable variation of the Cs coverage for 100 s was obtained, compared to that in the initial model. Based on the modified model, the operational temperature of the chamber wall was proposed to be less than 60 °C to suppress the desorption of Cs in the chamber wall and to sustain the stable negative ion production. In addition, it was also suggested that a slightly higher wall temperature before the operation leads to a decrease in the amount of Cs stored at the chamber wall, resulting in suppression of Cs consumption in the ion source. [ABSTRACT FROM AUTHOR]

Long pulse acceleration of hydrogen negative ion beams with the power density over 70 MW/m2 and the pulse length over 100 s has been demonstrated for the first time by using a multi-aperture 3-stage accelerator. Such long pulse acceleration was achieved by integrating the design of beam optics and voltage holding capability to meet the requirements of JT-60SA. By using the newly designed accelerator for JT-60SA, voltage holding at 500 kV with beam acceleration was stably sustained even after 5 g of cesium was seeded, and heat load on each acceleration grid was reduced below the allowable level for long pulse, less than 5% of total acceleration power. As a result, 500 keV, 154 A/m2 for 118 s beam acceleration was achieved, which satisfies the requirement of the negative ion source for JT-60SA. This pulse length of such high-power density beams is longest in the world. In addition, the result contributes to the long pulse acceleration of multi-stage electrostatic accelerators, such as 1 MeV negative ion accelerator for ITER. [ABSTRACT FROM AUTHOR]

The production and transport processes of H0 atoms are numerically simulated using a three-dimensional Monte Carlo transport code. The code is applied to the large JAEA 10 ampere negative ion source under the Cs-seeded condition to obtain a spatial distribution of surface-produced H- ions. In this analysis, the amount of H0 atoms produced through dissociation processes of H2 molecules is calculated from the electron temperature and density obtained by Langmuir probe measurements. The high-energy tail of electrons, which greatly affects H0 atom production, is taken into account by fitting a single-probe characteristic as a two-temperature Maxwellian distribution. In the H0 atom transport process, the energy relaxation of the H0 atoms, which affects the surface H- ion production rate, is taken into account. The result indicates that the surface H- ion production is enhanced near the high-electron-temperature region where H0 atom production is localized. [ABSTRACT FROM AUTHOR]

Describes a developed tungsten/titanium nitride (TiN) bilayer interconnections. Details on the minimum thickness of TiN; Information on the silicidation rage in the tungsten/TiN/silicon system; Experiment and result of the study.

Investigates the effects of interfacial oxide on defect generation and regrowth rate in solid-phase epitaxy of amorphized silicon. Influence of interfacial oxygen on a solid-phase epitaxy process; Evaluation of interfacial oxide layer; Reduction of interfacial oxygen concentration by silicon ion implantation.

In order to realize negative ion sources and accelerators to be applicable to International Thermonuclear Experimental Reactor and JT-60 Super Advanced, a large cesium (Cs)-seeded negative ion source and a multi-aperture and multi-stage electric acceleration have been developed at Japan Atomic Energy Agency (JAEA). Long pulse production and acceleration of the negative ion beams have been independently carried out. The long pulse production of the high current beams has achieved 100 s at the beam current of 15 A by modifying the JT-60 negative ion source. The pulse duration time is increased three times longer than that before the modification. As for the acceleration, a pulse duration time has been also extended two orders of magnitudes from 0.4 s to 60 s. The developments of the negative ion source and acceleration at JAEA are well in progress towards the realization of the negative ion sources and accelerators for fusion applications. [ABSTRACT FROM AUTHOR]

Design techniques for the vacuum insulation have been developed in order to realize a reliable voltage holding capability of multi-aperture multi-grid (MAMuG) accelerators for fusion application. In this method, the nested multi-stage configuration of the MAMuG accelerator can be uniquely designed to satisfy the target voltage within given boundary conditions. The evaluation of the voltage holding capabilities of each acceleration stages was based on the previous experimental results about the area effect and the multi-aperture effect. Since the multi-grid effectwas found to be the extension of the area effect by the total facing area this time, the total voltage holding capability of the multi-stage can be estimated from that per single stage by assuming the stage with the highest electric field, the total facing area, and the total apertures. By applying these consideration, the analysis on the 3-stage MAMuG accelerator for JT-60SA agreed well with the past gap-scan experiments with an accuracy of less than 10% variation, which demonstrated the high reliability to design MAMuG accelerators and also multistage high voltage bushings. [ABSTRACT FROM AUTHOR]

To understand the physics of the cesium (Cs) recycling in the large Cs-seeded negative ion sources relevant to ITER and JT-60SA with ion extraction area of 45-60 cm × 110-120 cm, the time evolution of the negative ion profile was precisely measured in JT-60SA where the ion extraction area is longitudinally segmented into 5. The Cs was seeded from the oven at 180 °C to the ion source. After 1 g of Cs input, surface production of the negative ions appeared only in the central segment where a Cs nozzle was located. Up to 2 g of Cs, the negative ion profile was longitudinally expanded over full ion extraction area. The measured time evolution of the negative ion profile has the similar tendency of distribution of the Cs atoms that is calculated. From the results, it is suggested that Cs atom distribution is correlated with the formation of the negative ion profile. [ABSTRACT FROM AUTHOR]

Long pulse beam extraction with a current density of 120 A/m² for 100 s has been achieved with a newly developed plasma grid (PG) for the JT-60SA negative ion source which is designed to produce high power and long pulse beams with a negative ion current of 130 A/m² (22 A) and a pulse length of 100 s. The PG temperature is regulated by fluorinated fluids in order to keep the high PG temperature for the cesium-seeded negative ion production. The time constant for temperature controllability of the PG was measured to be below 10 s, which was mainly determined by the heat transfer coefficient of the fluorinated fluid. The measured decay time of the negative ion current extracted from the actively temperature-controlled PG was 430 s which was sufficient for the JT-60SA requirement, and much longer than that by inertial-cooling PG of 60 s. Obtained results of the long pulse capability are utilized to design the full size PG for the JT-60SA negative ion source. [ABSTRACT FROM AUTHOR]

The purpose of this study is to calculate atomic (H0) density distribution in JAEA 10 ampere negative ion source. A collisional radiative model is developed for the calculation of the H0 density distribution. The non-equilibrium feature of the electron energy distribution function (EEDF), which mainly determines the H0 production rate, is included by substituting the EEDF calculated from 3D electron transport analysis. In this paper, the H0 production rate, the ionization rate, and the density distribution in the source chamber are calculated. In the region where high energy electrons exist, the H0 production and the ionization are enhanced. The calculated H0 density distribution with-out the effect of the H0 transport is relatively small in the upper region. In the next step, the effect should be taken into account to obtain more realistic H0 distribution. [ABSTRACT FROM AUTHOR]

Vacuum insulation on a large size negative ion accelerator with multiple extraction apertures and acceleration grids for fusion application was experimentally examined and designed. In the experiment, vacuum insulation characteristics were investigated in the JT-60 negative ion source with >1000 apertures on the grid with the surface area of ∼2 m2. The sustainable voltages varied with a square root of the gap lengths between the grids, and decreased with number of the apertures and with the surface area of the grids. Based on the obtained results, the JT-60SA (super advanced) negative ion source is designed to produce 22 A, 500 keV D- ion beams for 100 s. [ABSTRACT FROM AUTHOR]

A plasma generator for a long pulse H+/D+ ion source has been developed. The plasma generator was designed to produce 65 A H+/D+ beams at an energy of 120 keV from an ion extraction area of 12 cm in width and 45 cm in length. Configuration of the plasma generator is a multi-cusp bucket type with SmCo permanent magnets. Dimension of a plasma chamber is 25 cm in width, 59 cm in length, and 32.5 cm in depth. The plasma generator was designed and fabricated at Japan Atomic Energy Agency. Source plasma generation and beam extraction tests for hydrogen coupling with an accelerator of the KSTAR ion source have been performed at the KSTAR neutral beam test stand under the agreement of Japan-Korea collaborative experiment. Spatial uniformity of the source plasma at the extraction region was measured using Langmuir probes and ±7% of the deviation from an averaged ion saturation current density was obtained. A long pulse test of the plasma generation up to 200 s with an arc discharge power of 70 kW has been successfully demonstrated. The arc discharge power satisfies the requirement of the beam production for the KSTAR NBI. A 70 keV, 41 A, 5 s hydrogen ion beam has been extracted with a high arc efficiency of 0.9 -1.1 A/kW at a beam extraction experiment. A deuteron yield of 77% was measured even at a low beam current density of 73 mA/cm2. [ABSTRACT FROM AUTHOR]

In JAEA, research and developments to realize high power accelerator (1 MeV, 40 AD- ion beams for 3600 s) for ITER have been carried out experimentally and numerically utilizing a five stage MAMuG (Multiaperture, Multigrid) accelerator. In this paper, the extension of the gap length, which is required to improve the voltage holding capability, is examined in two dimensional beam optics analyses and also from view point of stripping loss of ions. In order to suppress excess power loadings due to the direct interception of negative ions, which is issued in long pulse tests, the beamlet deflection is analyzed in three dimensional multibeamlet analyses. The necessary modifications shown above are applied to the MAMuG accelerator for coming long pulse tests in JAEA and ITER. [ABSTRACT FROM AUTHOR]

Developments of the large negative ion source have been progressed in the high-energy, high-power, and long-pulse neutral beam injector for JT-60 Super Advanced. Countermeasures have been studied and tested for critical issues of grid heat load and voltage holding capability. As for the heat load of the acceleration grids, direct interception of D- ions was reduced by adjusting the beamlet steering. As a result, the heat load was reduced below an allowable level for long-pulse injections. As for the voltage holding capability, local electric field was mitigated by tuning gap lengths between large-area acceleration grids in the accelerator. As a result, the voltage holding capability was improved up to the rated value of 500 kV. To investigate the voltage holding capability during beam acceleration, the beam acceleration test is ongoing with new extended gap. [ABSTRACT FROM AUTHOR]

In experiments on uniformity improvement in a large negative ion source, steep gradients have been observed in the profiles of electron temperature and H- ion beam intensity. It has been observed that the gradient in the H- ion beam intensity is altered by seeding cesium, though the electron temperature distribution is not affected by Cs. Thus in the Cs seeded condition, the H- ion beam intensity is enhanced in local area illuminated by high electron temperature plasmas. A brief analysis suggests possible advantages of high electron temperature plasmas for the negative ion surface production, by enhancement of dissociation to yield proton or atoms as parent particles of the negative ions. [ABSTRACT FROM AUTHOR]

Based on previous studies on the spatial uniformity of the negative ion beam, the external magnetic filter was replaced to a novel tent-shaped magnetic filter in the JAEA 10 A negative ion source. The line-cusp field configuration on the source chamber was also changed to form a symmetric magnetic field like many of positive ion sources aiming at high proton yield. This magnetic field configuration allows fast electrons emitted from filament cathodes to rotate azimuthally inside the source chamber. The source configuration thus prevents localization of fast electrons due to their B×grad B drift in the filter field. As a result, the H- ion beam profile extracted from a wide region of 340×170 mm2 showed reduction of standard deviation from 16% in the original to 7.9% with the tent filter. The negative ion source with the tent filter satisfied the requirement of the beam uniformity for a large negative ion source in the ITER neutral beam injection. [ABSTRACT FROM AUTHOR]

For the ITER neutral beam system, reasearch and development of a vacuum-insulated MeV accelerator has been carried out at Japan Atomic Energy Research Institute. After a successful 1 MV insulation in vacuum for more than 2 h, H--ion-beam acceleration test is in progress to fulfill the ITER requirement of the current density of 200 A/m2 at 1 MeV, with good beam optics quality of <7 mrad divergence. For such a high-current-density H--ion-beam acceleration, the Kamaboko negative-ion source was operated at high input power, with increased filament number and magnetic filter strength. The optimum perveance was investigated by scanning the extraction and acceleration voltages, together with the beam divergence measurement. As a consequence, H--ion beams of 146 A/m2 (total ion-beam current: 206 mA) were obtained at 836 keV, of which power density is in the “ITER relevant” level. Such high-power-density beams with a divergence as low as 5 mrad were obtained at the optimum perveance corresponding to that of the ITER (200 A/m2 at 1 MeV). [ABSTRACT FROM AUTHOR]

Focuses on development of a three-dimensional particle code taking into account the collision terms between fast electrons and hydrogen molecules. Calculation of elastic, ionization, excitation, and vibrational excitation collisions; Application of the code into an ion source of the neutral beam injection system; Analyses of an electron emission.

Focuses on development of intense negative ion source producing multimegawatt hydrogen/deuterium negative ion beams. Neutral beam injector in TOKAMAK thermonuclear fusion machines; Long pulse negative ion source; Beam optics.

Seeding lateral epitaxy for silicon films on an insulator, using pseudoline shaped electron beam annealing, has been investigated. Higher oscillation frequency, higher beam scanning velocity, and suitable oscillation amplitude were effective to achieve large uniform silicon on insulator (SOI) films with the aid of simulating temperature distribution in silicon substrate. Furthermore, improved seed with tapered edge and capping layer of tungsten/insulator were employed to obtain 300 μm×1.3 mm single-crystal SOI films on a 1.3-μm SiO2 layer. Stacked SOI devices were successfully fabricated with low-temperature planarization process. 218 ps/stage propagation delay and 17 pJ power-delay product were obtained. [ABSTRACT FROM AUTHOR]

High power and long-pulse negative ion extractor, which is composed of the plasma grid (PG) and the extraction grid (EXG), is newly developed toward the neutral beam injector for heating and current drive of future fusion machines such as ITER, JT-60 Super Advanced and DEMO reactor. The PG is designed to enhance surface production of negative ions efficiently by applying the chamfered aperture. The efficiency of the negative ion production for the discharge power increased by a factor of 1.3 against that of the conventional PG. The EXG is also designed with the thermal analysis to upgrade the cooling capability for the long pulse operation of >1000 s required in ITER. Though the magnetic field for electron suppression is reduced to 0.75 of that in the conventional EXG due to this upgrade, it was experimentally confirmed that the extracted electron current can be suppressed to the allowable level for the long pulse operation. These results show that newly developed extractor has the high potential for the long pulse extraction of the negative ions. [ABSTRACT FROM AUTHOR]

In order to realize neutral beam systems in International Thermonuclear Experimental Reactor whose target is to produce a 1 MeV, 200 A/m² during 3600 s D- ion beam, the electrostatic five-stages negative ion accelerator so-called "MeV accelerator" has been developed at Japan Atomic Energy Agency. To extend pulse length, heat load of the acceleration grids was reduced by controlling the ion beam trajectory. Namely, the beam deflection due to the residual magnetic field of filter magnet was suppressed with the newly developed extractor with a 0.5 mm off-set aperture displacement. The new extractor improved the deflection angle from 6 mrad to 1 mrad, resulting in the reduction of direct interception of negative ions from 23% to 15% of the total acceleration power, respectively. As a result, the pulse length of 130 A/m², 881 keV H- ion beam has been successfully extended from a previous value of 0.4 s to 8.7 s. This is the first long pulse negative ion beam acceleration over 100 MW/m². [ABSTRACT FROM AUTHOR]

In a multi-aperture multi-grid accelerator of the ITER neutral beam injector, the beamlets are deflected due to space charge repulsion between beamlets and beam groups, and also due to magnetic field. Moreover, the beamlet deflection is influenced by electric field distortion generated by grid support structure. Such complicated beamlet deflections and the compensations have been examined utilizing a three-dimensional beam analysis. The space charge repulsion and the influence by the grid support structure were studied in a 1/4 model of the accelerator including 320 beamlets. Beamlet deflection due to the magnetic field was studied by a single beamlet model. As the results, compensation methods of the beamlet deflection were designed, so as to utilize a metal bar (so-called field shaping plate) of 1 mm thick beneath the electron suppression grid (ESG), and an aperture offset of 1 mm in the ESG. [ABSTRACT FROM AUTHOR]

Voltage holding test on MeV accelerator indicated that sustainable voltage was a half of that of ideal quasi-Rogowski electrode. It was suggested that the emission of the clumps is enhanced by a local electric field concentration, which leads to discharge initiation at lower voltage. To reduce the electric field concentration in the MeV accelerator, gaps between the grid supports were expanded and curvature radii at the support corners were increased. After the modifications, the accelerator succeeded in sustaining -1 MV in vacuum without beam acceleration. However, the beam energy was still limited at a level of 900 keV with a beam current density of 150 A/m2 (346 mA) where the 3 × 5 apertures were used. Measurement of the beam profile revealed that deflection of the H- ions was large and a part of the H- ions was intercepted at the acceleration grid. This causes high heat load on the grids and the breakdowns during beam acceleration. To suppress the direct interception, new grid system was designed with proper aperture displacement based on a 3D beam trajectory analysis. As the result, the beam deflection was compensated and the voltage holding during the beam acceleration was improved. Beam parameter of the MeV accelerator was increased to 980 keV, 185 A/m2 (427 mA), which is close to the requirement of ITER accelerator (1 MeV, 200 A/m2). [ABSTRACT FROM AUTHOR]

The first neutral beam (NB) injection system of the Korea Superconducting Tokamak Advanced Research (KSTAR) tokamak was partially completed in 2010 with only 1/3 of its full design capability, and NB heating experiments were carried out during the 2010 KSTAR operation campaign. The ion source is composed of a JAEA bucket plasma generator and a KAERI large multi-aperture accelerator assembly, which is designed to deliver a 1.5 MW, NB power of deuterium at 95 keV. Before the beam injection experiments, discharge, and beam extraction characteristics of the ion source were investigated. The ion source has good beam optics in a broad range of beam perveance. The optimum perveance is 1.1-1.3 μP, and the minimum beam divergence angle measured by the Doppler shift spectroscopy is 0.8°. The ion species ratio is D+:D2+:D3+ = 75:20:5 at beam current density of 85 mA/cm2. The arc efficiency is more than 1.0 A/kW. In the 2010 KSTAR campaign, a deuterium NB power of 0.7-1.5 MW was successfully injected into the KSTAR plasma with a beam energy of 70-90 keV. L-H transitions were observed within a wide range of beam powers relative to a threshold value. The edge pedestal formation in the Ti and Te profiles was verified through CES and electron cyclotron emission diagnostics. In every deuterium NB injection, a burst of D-D neutrons was recorded, and increases in the ion temperature and plasma stored energy were found. [ABSTRACT FROM AUTHOR]

Spatially non-uniform electron energy distribution function (EEDF) in an arc driven negative ion source (JAEA 10A negative ion source: 10 A NIS) is calculated numerically by a three-dimensional Monte Carlo kinetic model for electrons to understand spatial distribution of plasma production (such as atomic and ionic hydrogen (H0/H+) production) in source chamber. The local EEDFs were directly calculated from electron orbits including electromagnetic effects and elastic/inelastic collision forces. From the EEDF, spatial distributions of H0/H+ production rate were obtained. The results suggest that spatial non-uniformity of H0/H+ productions is enhanced by high energy component of EEDF. [ABSTRACT FROM AUTHOR]