Search

The giant magnetostrictive transducer is a transducer device that realizes magneto-mechanical energy conversion. Each mechanical component is connected by the joint surface to realize the transmission of ultrasonic vibration energy. To ensure the efficient transmission of energy, the influence of the contact characteristics of the joint surface on the output stability of the transducer is studied. According to the contact conditions between the mechanical joint surfaces of the giant magnetostrictive ultrasonic transducer (GMUT), the key factors affecting the mechanical vibration performance of the ultrasonic system are obtained by analyzing the vibration transmission characteristics of the joint surfaces. The influence of different joint surface contact characteristics (JSCT) on the amplitude–frequency curve of the transducer is analyzed by the ANSYS software. Simulations and experiments have been conducted to verify the predicted results. As the preload force increases, the natural frequency of the transducer increases, but the growth rate decreases. The natural frequency of the double-rod GMUT with a small joint surface area is slightly higher in the optimal output mode shape, while its amplitude is significantly larger. The optimal prestress for the GMUT with different-sized joint surfaces is 3–5 MPa. This paper acquires the JSCT under a high-frequency vibration condition, reveals the influence of the joint surface on the mechanical output performance of the GMUT, and can provide a theoretical basis for the design and analysis of the rotary ultrasonic vibration processing system. [ABSTRACT FROM AUTHOR]

We propose a surface measurement method based on optical frequency comb heterodyne interferometry ranging. A digital micromirror device is used to establish a single-pixel detection system without a mechanical scanning device and realize high-speed sampling. The measurement range of the step height is extended by synthetic wavelength interferometry from half of the carrier wavelength to half of the synthetic wavelength (40 μm in this system). Thus, a sample composed of three gauge blocks and an MEMS device of the teardrop-shaped groove were measured with an accuracy of 5 nm and a measurement time of 27 ms. [ABSTRACT FROM AUTHOR]

A surface acoustic wave (SAW)-driven acoustofluidic chip of high energy efficiency is proposed through model analysis. The chip supports propagation of Lamb waves in the lid above a fluid-filled channel. Eigenmode resonance in the on-chip channel is then achieved by coupling both the SAWs and the Lamb waves into the fluid. Specifically, the phase velocity of the Lamb mode equals the SAW speed along the substrate, and the leaky angles of both match that required by the expected channel mode. Compared to resonant SAW acoustofluidics (RSA), Lamb wave coupled RSA can make the energy tripled or higher. Meanwhile, the obtained resonance frequency deviates very slightly from the designed value, limiting the error to 0.5, while RSA chips exhibit errors as high as 5.7. The proposed design protocol can help to promote the energy efficiencies and contain the in-channel temperature rise and resonance frequency deviations in SAW acoustofluidics. [ABSTRACT FROM AUTHOR]