Search

The article offers information related to Steel fiber reinforced concrete (SFRC) in industrial floors concerning the so-called Belgian/Continental (Belgian) and Swedish approaches for the design of SFRC slabs. Topic discussed includes the Belgian approach for the design of SFRC industrial floors was used as a starting point for the significant amount of work accomplished by ACI Committee 544, Fiber Reinforced Concrete.

The article reports that the flat-plate concrete slabs provide economical floor structures for the short spans commonly associated with mid- and high-rise residential construction. Topics include examines that previous studies have shown that it is advantageous to reinforce flat-plate slabs with two continuous, uniform mats such as one at the bottom of the slab and the other at the top.

The article discusses the launch of the Stronger Standards, Exceptional Structures campaign by the Post-Tensioning Institute (PTI), focusing on the new 2024 International Residential Code (IRC) update for post-tensioned slab-on-ground design and construction requirements.

The article presents the discussion on steel fiber concrete being used in the Swedish construction industry. Topics include industrial concrete floors being constructed either as slabs on-ground or as pile-supported slabs; beneficial effects on slab strength being the arch effect, membrane effect, and reducing risk of weak zones; and increasing with increasing fiber content, fiber strength, and fiber anchorage devices.

The article focuses on the Golden Trowel Award was born unceremoniously as a joke during a working lunch in the offices of The Face Companies in Norfolk. Topics include the Golden Trowel is a sought-after industry award, drawing entries from around the world; and Golden Trowel Gold Plates are awarded to the winner in each category, while Golden Trowel Silver Plates also known as Silver Trowels.

The article offers information related to fiber-reinforced concrete industrial floors. Topic discussed includes developing new solutions, test methods, and design methods to make concrete floors with a "steel fiber only" reinforcement strategy and redesign of a Swedish pile-supported steel fiber concrete (SFC) slab.

The article offers guidance from the American Concrete Institute (ACI) for monitoring temperatures in concrete construction using infrared (IR) thermometers. Guidelines for using IR thermometer during cold weather and hot weather concreting, as well as for concrete floor and slab construction are outlined. Also presented are the specifications and requirements for monitoring the temperature to protect structural concrete which are for delivery.

Information about the events during the Concrete Decor Show that was held in San Antonio, Texas on February 20-24, 2012, is presented. The trade show benefited trainers and workshop attendees on the innovative artistry and altruism of flooring surfaces displayed during the event. The event included hands-on workshops, technical seminars, and technique demonstrations of decorative surfaces.

The article focuses on the specification requirements involving polished concrete floors. An overview of the reasons polishing costs differ is provided. According to the author, proper maintenance is extremely important, otherwise, polished floors will lose their shine after a long time. It is also inferred that daily dust mopping, frequent mopping and using a cleaner or conditioner created precisely to suspend the dirt particles are needed.

The article offers information on the new system that will enable to fix for loose slab joints in concrete floors. Several traditional methods are mentioned in repairing loose joint including retroit dowels, full-depth joint replacement, semi-rigid joint filler, and subslab grout injection. In the new system, the SD7 Joint Saver, it cause less disruption and require less downtime than any other method. In addition, the device also cost less than full-depth joint replacement and usually come in cheaper than retrofit dowels or subslab grout injection.

The article discusses stained concrete floors and the methods in creating their appearance. Stains can produce unique patterns which the concrete artist can use to create designs. Besides their appearance, they are also popular for their low maintenance needs, and ability to conserve heat. The types of authentic stains include acid based, waterborne reactive, and soy-based stains. Coloring products include dyes, color acrylic coatings, and paints. After knowing the customer's expectations in designing stains, it is important to stop traffic and protect the work area from spills. Prepare the surface to determine if the concrete absorbs water or is dense. To complete the project, the concrete is cured and sealed to protect the surface and maintain their color and appearance.

The article examines the calcium chloride method to quantify the moisture vapor emission rate (MVER) of a concrete slabs subflooring. The method involves putting an open dish containing anhydrous calcium chloride crystals beneath a plastic dome that is sealed to the concrete surface for 60 to 72 hours. The article also discusses factors contributing to artificially low emission-test results and ways to conduct calcium chloride tests to have meaningful results.

Offers suggestions on how to cure a floor discoloration problem. Importance of determining the effects of different curing methods; Factors to consider when choosing a solvent-based sealer.

Describes the architectural impact of polished concrete floors on the floor's aesthetic value. Aim of the process to reveal the underlying colors of concrete with the use of grinding and polishing techniques; Dependence of the color effects of the concrete from the addition of color admixtures to the concrete mixture; Impact of the grinding process on the surface seal; Design options of the grinding and polishing approach; Offer of a variety of lusters.

Presents a historical perspective of the pioneering efforts of the inventors and companies in creating decorative concrete flatwork products. Success of L.M. Scofield Co.'s Lynne Scofield in consistently batching and bonding color particles with concrete creating color hardeners in 1915; Attribution of decorative concreting to Brad Bowman due to his invention of stamping tools for patterning and texturing concrete in 1950; Citation of Gilbert Stanley's use of chemical stains in concrete flatwork in 1927; Credit for overlay products in decorative cement work to John Crossfield in 1938.

Discusses six available processes for creating colored concrete. Focus on the uses and specifications for color hardeners, integral color, chemical stains, penetrating tints, toppings and sealers; Suitability of color hardeners for textured concrete using synthetic pigments, portland cement, silica sand and emery aggregates; Dependence of the color consistency of integral color on component mixtures of liquid gel pigments, conditioners, water and reducing agents; Dependence of the resulting color from acid stains on the chemical reactions of the acid with the lime in the concrete structure.

The article offers information of the proof-rolling which is required in Section 11—Industrial Floor Slabs, of ACI 301-20, "Specifications for Concrete Construction. It mentions that the Section 11.3.1 instructs the contractor to "Proof-roll prepared base in accordance with Contract Documents," and the corresponding note in the Mandatory Requirements Checklist instructs the specifier to "Specify proof-rolling procedure, method of acceptance.

The article focuses on the Aridus™ portland-cement, a concrete solution developed to address moisture problems on concrete slabs or flooring. It states that the concrete is a cost-effective solution that accelerates drying, not affected by re-wetting, and can be applied using conventional equipment. It relates that Aridus™ was dried to 75% internal relative humidity in 15 days during a controlled laboratory test.

The article focuses on the application of curing methods to achieve durability for concrete floors. It states that single-use curing covers like the Mctech's UltraCure™ wet-curing blankets help improve abrasion resistance of concrete floors. It mentions that the use of colored and polished concrete as the final floor wearing surface eliminates the risk of discoloration. It adds that single-use curing covers cost less than traditional synthetic curing covers.

The article offers information on the "Dimensional Tolerances in Reinforced Concrete Elements" established by the Committee on Technical Specifications for Contracts of the Instituto del Cemento y del Hormigón de Chile (ICH). It reveals that the specification offers information on the tolerances of six concrete finish grades used in construction projects, including concrete for coating and painting, concrete for floors, and raw concrete. It states that measurement of tolerances of different concrete materials can also be performed. In addition, tolerances of concrete finish grades and the sanctions that will be imposed on noncompliance with the tolerances identified should be indicated in the construction contract.

Discusses the utilization of hydronic heating for thawing a frozen subgrade during concrete floor placement. Circulation of a heated propylene glycol mixture through hoses; Improvement in heat conductivity; Temperature that must be maintained during the protection period; Availability of portable hydronic heaters.

Discusses the use of a freeze-resistant concrete as a viable alternative to building a temporary structure. Superimposition of floors through freeze-resistant concrete; Factors determining the dosage rate for nonchloride accelerators; Considerations in making decisions dealing with freeze-resistant concrete.

The article offers information on the slab protection guidance from Concrete Polishing Council of the American Society of Concrete Contractors. Topics discussed include protection of the concrete surface after initial slab placement and polishing; authority to control the activities and schedule under polishing contractors; and developing an appropriate Concrete Floor Protection Plan (CFPP) for both post-placement and post-polishing slab protection.

The article presents construction industry news brief as of October 2017. Announcement of results of its annual Safety Recognition Program by the Concrete Reinforcing Steel Institute. Industry innovation at CEMEX USA technical center. Announcement of CTS Cement Manufacturing Corporation regarding its Komponent Shrinkage-Compensating Concrete systems and TRU Polished Concrete Flooring products in the BSD SpecLink-E program.

The article reports that the Affiliate Referral Program of the Perfect Polish rewards individuals and organizations who recommend the company to plant owners and managers that could benefit from polished concrete floors. It mentions that polished concrete is a durable and cost-effective flooring system that helps minimize maintenance. Jeff Yates, sales manager of Perfect Polish states that a good deal of their business comes from the recommendation of customers.

The article offers world news briefs related to the concrete industry in 2009. MC Industrial Inc. has received the Keystone Award from the Associated General Contractors of St. Louis, Missouri. Somero Enterprises Inc. has presented a white paper pushing best practices in concrete flat-floor placement at the Transport Intelligence Global Distribution Strategies-Asia Pacific 2008 Conference. Doka USA Ltd. has received the NOVA Award from the Construction Innovation Forum.

The article profiles the Russian company Aljans, one of the Sustaining Members of the American Concrete Institute (ACI). The company specializes in concrete construction of flooring systems, providing designing, reconstruction and repair of concrete flooring services. It is cited that Aljans was founded by Grigory Sinev in 2000.

The article reports on the Diaphragm Seismic Design Methodology's (DSDM) shake-table tests of a half-scale, three-story precast concrete parking structure in San Diego, California. The researchers at the Englekirk Structural Research Center tested the seismic response of precast concrete floor systems. They also conducted tests from lower seismicity and shook the building stronger and stronger each time with higher intensity.

The article evaluates the RsCrete® concrete floor finishing product from Faux Effects.

The article offers step-by-step instructions in positioning the vinyl graphic in a concrete floor.

A response by Mike Poppoff to a letter to the editor about his article "Standing on a Success Story" in the January 2008 issue is presented.

A letter to the editor is presented in response to the article "Standing on a Success Story," by Mike Poppoff in the January 2008 issue.

The article evaluates the EUCO DIAMOND HARD silicate/siliconate densifier and sealer for concrete floors.

The article reports that Allen Engineering Corp. has released its 2007 Product Catalog, which represents more than 40 years of research, development and customer feedback. The catalog features a comprehensive system for placing and finishing concrete floors and pavement. Products featured include trowels, screeds, sprayers, spreaders, hand tools, vibrators and pavers.

The article evaluates Shavemaster concrete floor corrections machine from Vic International.

The article presents literature related to concrete. They include "Guide for the Use of Silica Fume in Concrete," which describes the physical and chemical properties of silica fume, "Significance of Tests and Properties of Concrete & Concrete-Making Materials," which discusses concrete properties and "Guide for Concrete Floor and Slab Construction," which recommends for controlling random cracking and edge curling caused by the concrete's normal volume change.

Presents a letter to the editor regarding concrete floors.

Discusses methods used to produce polished concrete floors, their durability, and a rough estimate for the cost for producing them. Use of planetary head grinders with grinding heads containing diamonds embedded in either a metal or resin matrix; Need for periodic cleaning to avoid staining of the surface by dirt and spills.

Introduces the Levelrock Brand Floor Underlayment SE-100 Surface Enhancer from USG Corp. Use of strengthening the bond between underlayment and floor covering adhesives; Compatibility of the product from most water-based adhesives; Reduction of the alkalinity of concrete floor surfaces.

Presents an author's response to a letter regarding concrete flooring shrinkage featured in the article "Cost-Effective Slabs-On-Ground," published in the May 2004 issue of "Concrete International." Identification of joint deterioration as the most troublesome floor problem; Reduction of joint deterioration by providing appropriate dowel systems; Importance of slab jointing in design decisions.

Presents a letter to the editor regarding concrete flooring shrinkage featured in the article "Cost-Effective Slabs-On-Ground," published in the May 2004 issue of "Concrete International."

Focuses on the PNA Diamond Dowel System and Load Plate Baskets, which ensure a floating panel design that minimizes random cracking and joint deterioration. Benefits for contractors; Provision of engineers with a better design alternative that delivers a durable, maintenance-free floor.