Search

Bleomycins (BLMs) are widely used in combination with chemotherapy for the treatment of a variety of cancers. The clinical application of BLMs is featured by the occurrence of sometimes fatal side effects, such as renal and lung toxicity, and the potential dose-limiting side effect of pulmonary fibrosis. Therefore, it is highly desirable to develop a sensitive method to quantitatively determine the BLM content in both pharmaceutical analysis and clinical samples, to make full use of therapeutic efficacy and to weaken its toxicity. Here, we proposed a simple, rapid, and convenient electrochemical assay for trace BLM detection. A reported DNA motif, as substrate for BLMs, is prepared to self-assemble onto the gold electrode to fabricate an electrochemical DNA (E-DNA) sensor, with a terminus tethered on the electrode surface and the other terminus labeled with ferrocenyl moiety as a signal reporter to form a stem-loop structure, giving an arise of remarkable faradaic current. In the presence of Fe(II)-BLM, the E-DNA sensor undergoes the irreversible cleavage event, which can be transduced into a significant decrease in current peak. This proposed sensor reveals an impressive sensitivity as low as 100 pM BLMs and exhibits a good performance as well as in serum sample. Considering the high sensitivity and specificity of this proposed sensor, as well as the cost-effective and simple-to-implement features of the electrochemical technique, we believe that this method shows distinct advantages over conventional methods and it is a promising alternative for the determination of trace amounts of BLMs in clinical samples. 10.1021/ac101761q

We present a new glucose oxidase (GOx)-mediated strategy for detecting glucose based on carbon nanodots supported on silver nanoparticles (C-dots/AgNPs) as nanocomplexes. The strategy involves three processes: quenching of C-dots' fluorescence by AgNPs, production of H2O2 from GOx-catalyzed oxidation of glucose, and H2O2-induced etching of AgNPs. In the C-dots/AgNPs complex, AgNPs act as a "nanoquencher" to decrease C-dots fluorescence by surface plasmon-enhanced energy transfer (SPEET) from C-dots (donor) to AgNPs (acceptor). The H2O2 formed by GOx-catalyzed oxidation of glucose etches the AgNPs to silver ions, thus freeing the C-dots from the AgNPs surfaces and restoring the C-dots' fluorescence. Therefore, the increase in fluorescence depends directly on the concentration of H2O2, which, in turn, depends on the concentration of glucose. The strategy allows the quantitative analysis of glucose with a detection limit of 1.39 μM. The method based on C-dots/AgNPs offers the following advantages: simplicity of design and facile preparation of nanomaterials, as well as low experimental cost, because chemical modification and separation procedures are not needed. [ABSTRACT FROM AUTHOR]

Multidrug resistance (MDR) is the main obstacle in cancer chemotherapy. ATP binding cassette (ABC) transporters on the MDR cell membrane can transport a wide range of antitumor drugs out of cells, which is one of the main causes of MDR. Therefore, disturbing ABC transporters becomes the key to reversing MDR. In this study, we implement a cytosine base editor (CBE) system to knock out the gene encoding ABC transporters by base editing. When the CBE system works in MDR cells, the MDR cells are manipulated, and the genes encoding ABC transporters can be inactivated by precisely changing single in-frame nucleotides to induce stop (iSTOP) codons. In this way, the expression of ABC efflux transporters is reduced and intracellular drug retention is significantly increased in MDR cells. Ultimately, the drug shows considerable cytotoxicity to the MDR cancer cells. Moreover, the substantial downregulation of P-glycoprotein (P-gp) and breast cancer resistance protein (BCRP) implies the successful application of the CBE system in the knockout of different ABC efflux transporters. The recovery of chemosensitivity of MDR cancer cells to the chemotherapeutic drugs revealed that the system has a satisfactory universality and applicability. We believe that the CBE system will provide valuable clues for the use of CRISPR technology to defeat the MDR of cancer cells., Competing Interests: The authors declare no competing financial interest., (© 2023 American Chemical Society.)

Biological organisms capable of controlling and performing a wide variety of functions have inspired attempts to mimic biological systems with designable intelligence. Here we develop a multimachine communication network (MMCN) to mimic the operation and function of adaptive immune response (AIR) via connecting three kinds of DNA machines built from module-functionalized gold nanoparticles. These machines simulate three critical immune cells, dendritic cells, T and B lymphocytes, and their differentiation and coordinated interaction upon exposure and response to an invading pathogen. MMCN is composed of standard modules with track, movement, and fuel components that allow for the (1) integration and adaptability of a single machine, (2) convenient spatiotemporal control of the sequential activation of a single machine, and (3) rapid reaction rate and high efficiency owing to an enhanced local concentration of interacting species. We show that the proposed network can sense and clear the corresponding pathogen via consecutive activation and connection of the machines, simultaneously forming a memory to respond more rapidly and effectively upon the second invasion of the pathogen. This system may be extended to construct powerful networks to execute more sophisticated tasks and accomplish diverse functions.

Erythromycin is necessary in medical treatment and known to be biosynthesized with propionyl-CoA as direct precursor. Oversupply of propionyl-CoA induced hyperpropionylation, which was demonstrated as harmful for erythromycin synthesis in Saccharopolyspora erythraea. Herein, we identified three propionyl-CoA synthetases regulated by propionylation, and one propionyl-CoA synthetase SACE_1780 revealed resistance to propionylation. A practical strategy for raising the precursor (propionyl-CoA) supply bypassing the feedback inhibition caused by propionylation was developed through two approaches: deletion of the propionyltransferase AcuA, and SACE_1780 overexpression. The constructed Δ acuA strain presented a 10% increase in erythromycin yield; SACE_1780 overexpression strain produced 33% higher erythromycin yield than the wildtype strain NRRL2338 and 22% higher erythromycin yield than the industrial high yield Ab strain. These findings uncover the role of protein acylation in precursor supply for antibiotics biosynthesis and provide efficient post-translational modification-metabolic engineering strategy (named as PTM-ME) in synthetic biology for improvement of secondary metabolites.

Exosomes, a class of small extracellular vesicles, play important roles in various physiological and pathological processes by serving as vehicles for transferring and delivering membrane and cytosolic molecules between cells. Since exosomes widely exist in various body fluids and carry molecular information on their originating cells, they are being regarded as potential noninvasive biomarkers. Nevertheless, the development of convenient and quantitative exosome analysis methods is still technically challenging. Here, we present a low-cost assay for direct capture and rapid detection of exosomes based on a copper-mediated signal amplification strategy. The assay involves three steps. First, bulk nanovesicles are magnetically captured by cholesterol-modified magnetic beads (MB) via hydrophobic interaction between cholesterol moieties and lipid membranes. Second, bead-binding nanovesicles of exosomes with a specific membrane protein are anchored with aptamer-modified copper oxide nanoparticles (CuO NPs) to form sandwich complexes (MB-exosome-CuO NP). Third, the resultant sandwich complexes are dissolved by acidolysis to turn CuO NP into copper(II) ions (Cu 2+ ), which can be reduced to fluorescent copper nanoparticles (CuNPs) by sodium ascorbate in the presence of poly(thymine). The fluorescence emission of CuNPs increases with the increase of Cu 2+ concentration, which is directly proportional to the concentration of exosomes. Our method allows quantitative analysis of exosomes in the range of 7.5 × 10 4 to 1.5 × 10 7 particles/μL with a detection of limit of 4.8 × 10 4 particles/μL in biological sample. The total working time is about 2 h. The assay has the potential to be a simple and cost-effective method for routine exosome analysis in biological samples.

Exosomes, as an important subpopulation of extracellular vesicles (EVs), play an important role in intercellular communications in various important pathophysiological processes, especially cancer-related. However, reliable and convenient quantitative methods for their determination are still technically challenging. In this study, we developed an efficient and direct method by combining immunoaffinity and lipid membrane surface modification into a single platform for specific isolation and accurate quantification of exosomes. Exosomes are specifically captured by immunomagnetic beads, and then a bivalent-cholesterol (B-Chol)-labeled DNA anchor with high affinity is spontaneously inserted into the exosome membrane. The rationally designed sticky end of the anchor acts as the initiator for the subsequent horseradish peroxidase (HRP)-linked hybridization chain reaction (HCR) for signal amplification. Detection is based on the color change of HRP-catalyzed H 2 O 2 -mediated oxidation of 3,3',5,5'- tetramethyl benzidine (TMB), which can be conveniently observed by the naked eye and monitored by UV-vis spectrometry. This proposed method enables sensitive detection of 2.2 × 10 3 exosomes per microliter with a relative standard deviation of <5.6%, with 100-fold higher sensitivity compared to conventional ELISA. We believe that our assay has considerable potential as a routine bioassay (cost-efficient, reliable, and easy to operate) for the accurate quantification of exosomes in clinical samples.

Simultaneous detection of cancer biomarkers holds great promise for the early diagnosis of cancer. In the present work, an ultrasensitive and reliable surface-enhanced Raman scattering (SERS) sensor has been developed for simultaneous detection of multiple liver cancer related microRNA (miRNA) biomarkers. We first proposed a novel strategy for the synthesis of nanogap-based SERS nanotags by modifying gold nanoparticles (AuNPs) with thiolated DNA and nonfluorescent small encoding molecules. We also explored a simple approach to a green synthesis of hollow silver microspheres (Ag-HMSs) with bacteria as templates. On the basis of the sandwich hybridization assay, probe DNA-conjugated SERS nanotags used as SERS nanoprobes and capture DNA-conjugated Ag-HMSs used as capture substrates were developed for the detection of target miRNA with a detection limit of 10 fM. Multiplexing capability for simultaneous detection of the three liver cancer related miRNAs with the high sensitivity and specificity was demonstrated using the proposed SERS sensor. Furthermore, the practicability of the SERS sensor was supported by the successful determination of target miRNA in cancer cells. The experimental results indicated that the proposed strategy holds significant potential for multiplex detection of cancer biomarkers and offers the opportunity for future applications in clinical diagnosis.

We present a new copper-mediated on-off switch for detecting either pyrophosphate (PPi) or alkaline phosphatase (ALP) based on DNA-scaffolded silver nanoclusters (DNA/AgNCs) templated by a single-stranded sequence containing a 15-nt polythymine spacer between two different emitters. The switch is based on three favorable properties: the quenching ability of Cu(2+) for DNA/AgNCs with excitation at 550 nm; the strong binding capacity of Cu(2+) and PPi; and the ability of ALP to transform PPi into orthophosphate (Pi). The change in fluorescence of DNA/AgNCs depends on the concentrations of Cu(2+), PPi, and ALP. Copper(II) acts as a mediator to interact specifically with the Probe, while PPi and ALP convert the signal of the Probe by removing and recovering Cu(2+), operating as an on-off switch. In the presence of Cu(2+) only, DNA/AgNCs exhibit low fluorescence because the combination of Cu(2+) and DNA template disturbs the precise formation of DNA/AgNCs. When PPi is added to the system containing Cu(2+), free DNA template is obtained due to the stronger interaction of PPi and Cu(2+), leading to a significant fluorescence increase (ON state) which depends on the concentration of PPi. Further addition of ALP results in the release of free Cu(2+) via ALP-catalysis of hydrolysis of PPi into Pi, thereby returning the system to the low fluorescence OFF state. The switch allows the analysis of either PPi or ALP by observation of the fluorescence status, with the detection limit of 112.69 nM and 0.005 U/mL for PPi and ALP, respectively. The AgNCs on-off switch provides the advantages of simple design, convenient operation, and low experimental cost without need of chemical modification, organic dyes, or separation procedures.

A facile and efficient route for the synthesis of tetrasubstituted imidazoles from amidines and chalcones via FeCl3/I2-catalyzed aerobic oxidative coupling has been developed. This new strategy is featured by high regioselectivity and yields, good functional group tolerance, and mild reaction conditions.

We have developed a label-free method for sequence-specific DNA detection based on surface plasmon enhanced energy transfer (SPEET) process between fluorescent DNA/AgNC string and gold nanoparticles (AuNPs). DNA/AgNC string, prepared by a single-stranded DNA template encoded two emitter-nucleation sequences at its termini and an oligo spacer in the middle, was rationally designed to produce bright fluorescence emission. The proposed method takes advantage of two strategies. The first one is the difference in binding properties of single-stranded DNA (ssDNA) and double-stranded DNA (dsDNA) toward AuNPs. The second one is SPEET process between fluorescent DNA/AgNC string and AuNPs, in which fluorescent DNA/AgNC string can be spontaneously adsorbed onto the surface of AuNPs and correspondingly AuNPs serve as "nanoquencher" to quench the fluorescence of DNA/AgNC string. In the presence of target DNA, the sensing probe hybridized with target DNA to form duplex DNA, leading to a salt-induced AuNP aggregation and subsequently weakened SPEET process between fluorescent DNA/AgNC string and AuNPs. A red-to-blue color change of AuNPs and a concomitant fluorescence increase were clearly observed in the sensing system, which had a concentration dependent manner with specific DNA. The proposed method achieved a detection limit of ∼2.5 nM, offering the following merits of simple design, convenient operation, and low experimental cost because of no chemical modification, organic dye, enzymatic reaction, or separation procedure involved.

MicroRNA (miRNA) has become an ideal biomarker candidate for cancer diagnosis, prognosis, and therapy. In this study, we have developed a novel one-step method for sensitive and specific miRNA detection via enzymatic signal amplification and demonstrated its practical application in biological samples. The proposed signal amplification strategy is an integrated "biological circuit" designed to initiate a cascade of enzymatic polymerization reactions in order to detect, amplify, and measure a specific miRNA sequence by using the isothermal strand-displacement property of a mesophilic DNA polymerase together with the nicking activity of a restriction endonuclease. The circuit is composed of two molecular switches operating in series: the nicking endonuclease-assisted isothermal polymerization reaction activated by a specific miRNA and the strand-displacement polymerization reaction designed to initiate molecular beacon-assisted amplification and signal transduction. The hsa-miR-141 (miR-141) was chosen as a target miRNA because its level specifically elevates in prostate cancer. The proposed method allowed quantitative sequence-specific detection of miR-141 in a dynamic range from 1 fM to 100 nM, with an excellent ability to discriminate differences among miR-200 family members. Moreover, the detection assay was applied to quantify miR-141 in cancerous cell lysates. The results are in excellent agreement with those from the reverse transcription polymerase chain reaction method. On the basis of these findings, we believe that this proposed sensitive and specific assay has great potential as a miRNA quantification method for use in biomedical research and clinical diagnosis.

In this study, we have developed a novel strategy to highly sensitize the luminescence of terbium(III) (Tb(3+)) using a designed guanine/thymine-rich DNA (5'-[G3T]5-3') as an antenna ligand, in which [G3T]5 improved the luminescence of Tb(3+) by 3 orders of magnitude due to energy transfer from nucleic acids to Tb(3+) (i.e., antenna effect). Furthermore, label-free probes for the luminescent detection of biothiols, Ag(+), and sequence-specific DNA in an inexpensive, simple, and mix-and-read format are presented based on the [G3T]5-sensitized luminescence of Tb(3+) (GTSLT). The long luminescence lifetime of the probes readily enables time-resolved luminescence (TRL) experiments. Hg(2+) can efficiently quench the luminescence of Tb(3+) sensitized by [G3T]5 (Tb(3+)/[G3T]5); however, biothiols are readily applicable to selectively grab Hg(2+) for restoration of the luminescence of Tb(3+)/[G3T]5 initially quenched by Hg(2+), which can be used for "turn on" detection of biothiols. With the use of cytosine (C)-rich oligonucleotide c[G3T]5 complementary to [G3T]5, the formed [G3T]5/c[G3T]5 duplex cannot sensitize the luminescence of Tb(3+). However, in the presence of Ag(+), Ag(+) can combine the C base of c[G3T]5 to form C-Ag(+)-C complexes, leading to the split of the [G3T]5/c[G3T]5 duplex and then release of [G3T]5. The released [G3T]5 acts as an antenna ligand for sensitizing the luminescence of Tb(3+). Therefore, the Tb(3+)/[G3T]5/c[G3T]5 probe can be applied to detect Ag(+) in a "turn on" format. Moreover, recognition of target DNA via hybridization to a molecular beacon (MB)-like probe (MB-[G3T]5) can unfold the MB-[G3T]5 to release the [G3T]5 for sensitizing the luminescence of Tb(3+), producing a detectable signal directly proportional to the amount of target DNA of interest. This allows the development of a fascinating label-free MB probe for DNA sensing based on the luminescence of Tb(3+). Results and methods reported here suggest that a guanine/thymine-rich DNA-sensitized luminescence probe of Tb(3+) represents a new opportunity for versatile background-free biosensing applications.

Traditional molecular beacons, widely applied for detection of nucleic acids, have an intrinsic limitation on sensitivity, as one target molecule converts only one beacon molecule to its fluorescent form. Herein, we take advantage of the duplex-specific nuclease (DSN) to create a new signal-amplifying mechanism, duplex-specific nuclease signal amplification (DSNSA), to increase the detection sensitivity of molecular beacons (Taqman probes). DSN nuclease is employed to recycle the process of target-assisted digestion of Taqman probes, thus, resulting in a significant fluorescence signal amplification through which one target molecule cleaves thousands of probe molecules. We further demonstrate the efficiency of this DSNSA strategy for rapid direct quantification of multiple miRNAs in biological samples. Our experimental results showed a quantitative measurement of sequence-specific miRNAs with the detection limit in the femtomolar range, nearly 5 orders of magnitude lower than that of conventional molecular beacons. This amplification strategy also demonstrated a high selectivity for discriminating differences between miRNA family members. Considering the superior sensitivity and specificity, as well as the multiplex and simple-to-implement features, this method promises a great potential of becoming a routine tool for simultaneously quantitative analysis of multiple miRNAs in tissues or cells, and supplies valuable information for biomedical research and clinical early diagnosis.

An effective dual-DNAzyme-based unimolecular probe design employing intramolecular signal transduction is demonstrated. The probe is composed of three domains: a DNA-cleaving DNAzyme, a substrate, and an HRP-mimicking DNAzyme. When the probe meets its target, cleavage of the substrate by the DNA-cleaving DNAzyme activates the HRP-mimicking DNAzyme, producing a colorimetric signal. The Cu(2+)-dependent DNAzyme engineered to demonstrate this design revealed a sensitivity corresponding to 65 ppb, which is sufficient to detect Cu(2+) in drinking water. The new probe has excellent selectivity toward Cu(2+). This three-component design is simple and easy to engineer. It may provide the basis for future development of other nucleic acid-based probes for toxicological and environmental monitoring.