Search

Developing sustainable electronics requires using materials that are either recyclable or biodegradable, without compromising on electrical performance. Here, we introduce a solution-processed biodegradable polymer blend consisting of a diketopyrrolopyrrole-based semiconducting polymer (DPP2T) and different mixtures of two biodegradable polymers, polycaprolactone (PCL) and polylactic acid (PLA). We find that controlling the ratio of components enables a reduction in semiconductor polymer loading (∼70:80% reduction) while maintaining or improving field-effect transistor performance. At a ratio of 30 wt % DPP2T versus 70 wt % PLA and PCL (56:14 ratio), DPP2T self-assembled and crystallized inside the biodegradable polymer matrix, exhibiting a high field-effect mobility (0.18 cm 2 V -1 s -1 ), a reduced threshold voltage (∼17 V), and a high on/off ratio (∼10 6 ). This study demonstrates that performance does not need to be sacrificed for biodegradability.

The 3D micro- and nanostructure of wood has extensively been employed as a template for cost-effective and renewable electronic technologies. However, other electroactive components, in particular native lignin, have been overlooked due to the absence of an approach that allows access of the lignin through the cell wall. In this study, we introduce an approach that focuses on establishing conjugated-polymer-based electrical connections at various length scales within the wood structure, aiming to leverage the charge storage capacity of native lignin in wood-based energy storage electrodes. We demonstrate that poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) PEDOT/PSS, integrated within the cell wall lumen, can be interfaced with native lignin through the wood cell wall through in situ polymerization of a water-soluble S-EDOT monomer. This approach increases the capacitance of the conductive wood to 315 mF cm -2 at a scan rate of 5 mV s -1 , which is seven and, respectively, two times higher compared to the capacitance of conductive wood made with the single components PEDOT/PSS or S-PEDOT. Moreover, we show that the capacitance is contributed by both the electroactive polymers and native lignin, with native lignin accounting for over 70% of the total charge storage capacity. We show that accessing native lignin through in situ creation of electrical interconnections within the wood structure offers a pathway toward sustainable, wood-based electrodes with improved charge-storage capacity for applications in electronics and energy storage.

Organic electronic devices rely on the performance of polymers that are used as active layers. Poly-(3,4-ethylenedioxythiophene) (PEDOT) is one of the most studied polymers for organic electronic devices and especially bioelectronics. Because charge carriers move along the polymer backbone (anisotropic charge transport), one of the key challenges is controlling orientation of the polymer in thin films, hence increasing the transport performance. Here, we introduce a method for the oriented growth of PEDOT chains on nanometer-thick self-assembled monolayer (SAM)-modified gold electrodes. We show that, when the gold layer is covered with a SAM that is active for polymer chain growth, a more crystalline film is obtained compared to the surface having a nonactive SAM. We used a nitric acid oxidant to perform the polymerization, which overcomes temperature incompatibility between the gold-supported thiolate monolayers and the polymerization. We characterize the chemical nature and physical properties of the oriented PEDOT film. Reaction conditions and ease of processing appeal especially to organic electronic device applications where surface modification can play a critical role. [ABSTRACT FROM AUTHOR]

Interface engineering is the key to optimizing optoelectronic device performance, addressing challenges like reducing potential barriers, passivating interface traps, and controlling recombination of charges. Metal fluorides such as lithium fluoride are employed in interface modification within organic devices due to their strong dipole characteristics but carry health risks, high processing costs, and minimal impact on interface traps in organic electronics. Hence, this study investigates alternative metal chloride (MC) nanocrystals (sodium, cesium, rubidium, and potassium chlorides) that exhibit a strong dipole moment and are readily processable with the aim of reducing the influence of interface traps. Interfacial properties are assessed via various techniques, including electron paramagnetic resonance, X-ray/ultraviolet photoelectron spectroscopy, capacitance-voltage measurements, and density functional theory calculations. In organic light-emitting diodes (OLEDs), the influence of MC on charge transfer, trap density, and light emission properties is evaluated. MCs in ZnO:PEIE nanocomposites (NCs) show improved charge transport, accelerated trapping/detrapping in ZnO:PEIE NCs, and a 50% reduction in active traps in NaCl-based devices versus the reference without MCs. RbCl-, CsCl-, and NaCl-based OLEDs exhibit substantial reductions in the potential barrier between the electron injection layer and the metal contact (Al) from 4.43 to 2.93, 3.02, and 4 eV, respectively, accompanied by enhancements of 35, 27, and 25% in electroluminescence intensity.

Materials possessing multiple properties and functionalities, that can be controlled or modulated by external stimuli, are a central focus of current research in materials sciences due to their potential to significantly enhance various future technological applications. Herein, we report a significant advancement in this field through the development of a smart, multifunctional organomagnetic composite material. By utilizing a thin layer of polydimethylsiloxane (PDMS) and polypyrrole (PPy) precursors, doped with nickel nanoparticles (NiNPs), we have created an innovative organomagnetic, PDMS/PPy/NiNPs (PPN), single-layer composite film that displays multistimuli responsivity. The study presents the first demonstration of a multifunctional flexible, three-component film structure integrating the structural and flexible PDMS component, together with a conductive polymer component and metal-based nanoparticles into a single-layer design, which displays enhanced and unprecedented responsivity properties against multiple different stimuli. Unlike typical stacked multilayered structures, that exhibit one or two functionalities at most, this novel configuration exhibits multiple functionalities, including magnetoresistance, mechanical stress response, piezoresistivity, and temperature change sensitivity. The as-prepared film demonstrates notable magnetoresistance responsivity, with a relative electrical resistance, Δ R / R 0 , changing under a weak magnetic field and under ambient conditions. The significance of our study lies in the film's versatility, stability, and sensitivity, especially within the physiological temperature range, making it highly relevant for future biomedical applications. Furthemore, the film's sensitivity to mechanical deformation reveals an impressive piezoresistance behavior. Unlike existing multilayer architectures of higher complexity, our single-layer thin film offers a simpler, more flexible, and reliable solution with a broad range of stimuli-sensing capabilities. The significance of this novel multiresponsive composite material is underscored by the growing demand for advanced materials in biomedical devices, magnetic switches, sensors, electronic skin, transistors, and organic spintronic devices. These promising organomagnetic self-standing layers provide a robust platform for future technological innovations.

Understanding charge transport in conjugated polymers is crucial for the development of next-generation organic electronic applications. It is presumed that structural disorder in conjugated polymers originating from their semicrystallinity, processing, or polymorphism leads to a complex energetic landscape that influences charge carrier transport properties. However, the link between polymer order parameters and energetic landscape is not well established experimentally. In this work, we successfully link statistical surveys of the local polymer electronic structure with paracrystalline structural disorder, a measure of statistical fluctuations away from the ideal polymer packing structure. We use scanning tunneling microscopy/spectroscopy to measure spatial variability in electronic band edges in PM6 films, a high-performance conjugated polymer, and find that films with higher paracrystallinity exhibit greater electronic disorder, as expected. In addition, we show that macroscopic charge carrier mobility in field effect transistors and and trap influence in hole-only diode devices is positively correlated with these microscopic structural and electronic parameters.

Advancing iontronics with precisely controlled ion transport is fundamentally important to bridge external organic electronics with the biosystem. This long-standing goal, however, is thus far limited by the trade-off between the active ion electromigration and idle diffusion leakage in the (semi)crystalline film. Here, we presented a mixed-orientation strategy by blending a conjugated polymer, allowing for simultaneously high ion electromigration efficiency and low leakage. Our studies revealed that edge-on aggregation with a significant percolative pathway exhibits much higher ion permeability than that of the face-on counterpart but encounters pronounced leakage diffusion. Through carefully engineering the mixed orientations, the polymer composite demonstrated an ideal switchable ion-transport behavior, achieving a remarkably high electromigration efficiency exceeding one quadrillion ions per milliliter per minute and negligible idle leakage. This proof of concept, validated by drug release in a skin-conformable organic electronic ion pump (OEIP), offers a rational approach for the development of multifunctional iontronic devices.

The integration of nanotechnology with photoredox medicine has led to the emergence of biocompatible semiconducting polymer nanoparticles (SPNs) for the optical modulation of intracellular reactive oxygen species (ROS). However, the need for efficient photoactive materials capable of finely controlling the intracellular redox status with high spatial resolution at a nontoxic light density is still largely unmet. Herein, highly photoelectrochemically efficient photoactive polymer beads are developed. The photoactive material/electrolyte interfacial area is maximized by designing porous semiconducting polymer nanoparticles (PSPNs). PSPNs are synthesized by selective hydrolysis of the polyester segments of nanoparticles made of poly(3-hexylthiophene)- graft -poly(lactic acid) (P3HT- g -PLA). The photocurrent of PSPNs is 4.5-fold higher than that of nonporous P3HT- g -PLA-SPNs, and PSPNs efficiently reduce oxygen in an aqueous environment. PSPNs are internalized within endothelial cells and optically trigger ROS generation with a >1.3-fold concentration increase with regard to nonporous P3HT-SPNs, at a light density as low as a few milliwatts per square centimeter, fully compatible with in vivo , chronic applications.

Organic semiconducting materials are promising for the fabrication of flexible ionizing radiation detectors for imaging because of their tissue equivalence, simple large-scale processing, and mass production. However, it is challenging to achieve high-sensitivity detection for organic direct detectors prepared by low-cost solution processing because of the compromise between thickness and carrier transport. In this study, high-performance organic direct X-ray detectors were fabricated by building a micrometer-thick bulk heterojunction (BHJ) using poly(3-hexylthiophene-2,5-diyl) (P3HT):(6,6)-phenyl c71 butyric acid methyl ester. A 5 μm BHJ film was fabricated by drop-casting and enhanced crystallization of P3HT using binary solvents and high-boiling-point additives to improve the charge carrier mobility. Furthermore, this organic direct X-ray detector has a sensitivity of >654.26 μC Gy air s -1 and a self-powered response. Because of the architecture of the thick active layer and the energy cascade in this diode detector, it has a very low dark current of 46.26 pA at -2 V. A fast and efficient approach was developed for fabricating thick, highly mobile organic BHJ films for high-performance direct X-ray detectors. It has great potential for application in a new generation of flexible and portable large-area flat-panel detectors.

Modulation of interfacial conductivity in organic heterostructures is a highly promising strategy to improve the performance of electronic devices. In this endeavor, the present work reports the fabrication of a bilayer heterojunction device, combining octafluoro copper phthalocyanine (CuF 8 Pc) and lutetium bis-phthalocyanine (LuPc 2 ) and tunes the charge transport at the Cu(F 8 Pc)-(LuPc 2 ) interface by aryl electrografting on the device electrode to improve the device NH 3 -sensing properties. Dimethoxybenzene (DMB) and tetrafluoro benzene (TFB) electrografted by an aryldiazonium electroreduction method form a few-nanometer-thick organic film on ITO. The conductivity of the heterojunction devices formed by coating a Cu(F 8 Pc)/LuPc 2 bilayer over the aryl-grafted electrode strongly varies according to the electronic effects of the substituents in the aryl. Accordingly, DMB increases while TFB decreases the mobile charges accumulation at the Cu(F 8 Pc)-(LuPc 2 ) interface. This is explained by the perfect alignment of the frontier molecular orbitals of DMB and Cu(F 8 Pc), facilitating charge injection into the Cu(F 8 Pc) layer. On the contrary, TFB behaves like a strong acceptor and reduces the mobile charges accumulation at the Cu(F 8 Pc)-(LuPc 2 ) interface. Such interfacial conductivity variation influences the device NH 3 -sensing properties, which increase because of DMB grafting and decrease in the presence of TFB. DMB-based heterojunction devices contain four times higher active sites for NH 3 adsorption and could detect NH 3 down to 1 ppm with limited interference from humidity, making them suitable for real environment NH 3 detection.

Printable organic semiconducting single crystals (OSSCs) offer tantalizing opportunities for next-generation wearable electronics, but their development has been plagued by a long-standing yet inherent problem─spatially uncontrolled and stochastic nucleation events─which usually causes the formation of polycrystalline films and hence limited performance. Here, we report a convenient approach to precisely manipulate the elusive molecule nucleation process for high-throughput inkjet printing of OSSCs with record-high mobility. By engineering curvature of the contact line with a teardrop-shaped micropattern, molecule nucleation is elegantly anchored at the vertex of the topological structure, enabling formation of a single nucleus for the subsequent growth of OSSCs. Using this approach, we achieve patterned growth of 2,7-dioctyl[1]benzothieno[3,2- b ][1]benzothiophene single crystals, yielding a breakthrough for an organic field-effect transistor array with a high average mobility of 12.5 cm 2 V -1 s -1 . These findings not only provide keen insights into controlling molecule nucleation kinetics but also offer opportunities for high-performance printed electronics.

The integration of organic electronic circuits into real-life applications compels the fulfillment of a range of requirements, among which the ideal operation at a low voltage with reduced power consumption is paramount. Moreover, these performance factors should be achieved via solution-based fabrication schemes in order to comply with the promise of cost- and energy-efficient manufacturing offered by an organic, printed electronic technology. Here, we propose a solution-based route for the fabrication of low-voltage organic transistors, encompassing ideal device operation at voltages below 5 V and exhibiting n-type unipolarization. This process is widely applicable to a variety of semiconducting and dielectric materials. We achieved this through the use of a photo-cross-linked, low- k dielectric interlayer, which is used to fabricate multilayer dielectric stacks with areal capacitances of up to 40 nF/cm 2 and leakage currents below 1 nA/cm 2 . Because of the chosen azide-based cross-linker, the dielectric promotes n-type unipolarization of the transistors and demonstrated to be compatible with different classes of semiconductors, from conjugated polymers to carbon nanotubes and low-temperature metal oxides. Our results demonstrate a general applicability of our unipolarizing dielectric, facilitating the implementation of complementary circuitry of emerging technologies with reduced power consumption.

Thiazolo-[4,5-d]-thiazo-frame (tztz) compounds are important heteroaromatic organic systems, which recently became a subject of several studies in the field of organic electronics and organic photovoltaics. The most important physical nature of these systems is reported to be an equilibrium between enol and keto forms following excited-state proton transfer. This process originates from a flat trend of the S1 PE (potential energy) profile along the proton transfer coordinate. In the present work, we determined and interpreted the excited-state proton transfer and photophysical nature of these systems extensively by means of the MP2/CC2 and CASSCF theoretical approaches. Also, the effects of amine (-NH2) and cyano (-CN) substitutions were taken into account comprehensively by considering the transition energies and proton transfer pathways of the resulting tztz derivatives. It has been predicted that the physical nature of the excited-state intramolecular proton transfer, as the main character of these systems, is being affected significantly by substitutions. For all of the considered tztz derivatives, a conical intersection (CI) between ground and the S1 excited state was predicted. This CI makes the considered species capable to be responsible for photochromism and photoswitching as well. [ABSTRACT FROM AUTHOR]

An annealing-free process is considered as a technological advancement for the development of flexible (or wearable) organic electronic devices, which can prevent the distortion of substrates and damage to the active components of the device and simplify the overall fabrication process to increase the industrial applications. Owing to its outstanding electrical, optical, and mechanical properties, graphene is seen as a promising material that could act as a transparent conductive electrode for flexible optoelectronic devices. Owing to their high transparency and electron mobility, zinc oxide nanoparticles (ZnO-NP) are attractive and promising for their application as charge transporting materials for low-temperature processes in organic solar cells (OSCs), particularly because most charge transporting materials require annealing treatments at elevated temperatures. In this study, graphene/annealing-free ZnO-NP hybrid materials were developed for inverted OSC by successfully integrating ZnO-NP on the hydrophobic surface of graphene, thus aiming to enhance the applicability of graphene as a transparent electrode in flexible OSC systems. Chemical, optical, electrical, and morphological analyses of ZnO-NPs showed that the annealing-free process generates similar results to those provided by the conventional annealing process. The approach was effectively applied to graphene-based inverted OSCs with notable power conversion efficiencies of 8.16% and 7.41% on the solid and flexible substrates, respectively, which promises the great feasibility of graphene for emerging optoelectronic device applications. [ABSTRACT FROM AUTHOR]

This study describes the synthesis of modular diquinolineanthracene and polydiquinolineanthracene derivatives. The reported facile and scalable aza-Diels–Alder-based approach requires mild conditions, proceeds in two steps, uses commercially available starting materials, and accommodates varying functionalities. Given the known utility of the acene and quinoline motifs, the synthesized molecules and polymers hold promise for organic electronics applications. [ABSTRACT FROM AUTHOR]

Phenylenevinylene oligomers (PVs) have outstanding photophysical characteristics for applications in the growing field of organic electronics. Yet, PVs are also versatile molecules, the optical and physicochemical properties of which can be tuned by manipulation of their structure. We report the synthesis, photophysical, and MS characterization of eight PV derivatives with potential value as electron transfer (ET) matrices for UV-MALDI. UV-vis analysis show the presence of strong characteristic absorption bands in the UV region and molar absorptivities at 355 nm similar or higher than those of traditional proton (CHCA) and ET (DCTB) MALDI matrices. Most of the PVs exhibit non-radiative quantum yields (φ) above 0.5, indicating favorable thermal decay. Ionization potential values (IP) for PVs, calculated by the Electron Propagator Theory (EPT), range from 6.88 to 7.96 eV, making these oligomers good candidates as matrices for ET ionization. LDI analysis of PVs shows only the presence of radical cations (M) in positive ion mode and absence of clusters, adducts, or protonated species; in addition, M threshold energies for PVs are lower than for DCTB. We also tested the performance of four selected PVs as ET MALDI matrices for analytes ranging from porphyrins and phthalocyanines to polyaromatic compounds. Two of the four PVs show S/N enhancement of 1961% to 304% in comparison to LDI, and laser energy thresholds from 0.17 μJ to 0.47 μJ compared to 0.58 μJ for DCTB. The use of PV matrices also results in lower LODs (low fmol range) whereas LDI LODs range from pmol to nmol. [ABSTRACT FROM AUTHOR]

Anisotropic molecular packing, particularly in highly ordered liquid crystalline arrangements, has the potential for optimizing performance in organic electronic and optoelectronic applications. Here we show that physical vapor deposition can be used to prepare highly organized glassy solids of discotic liquid crystalline systems. Using grazing incidence X-ray scattering, atomic force microscopy, and UV-vis spectroscopy, we compare three systems: a rectangular columnar liquid crystal, a hexagonal columnar liquid crystal, and a nonmesogen. The packing motifs accessible by vapor deposition are highly organized for the liquid crystalline systems with columns propagating either in-plane or out-of-plane depending upon the substrate temperature during deposition. The structures formed at a given substrate temperature can be understood as resulting from partial equilibration toward the structure of the equilibrium liquid crystal surface during the deposition process. [ABSTRACT FROM AUTHOR]

Diketopyrrolopyrrole (DPP) derivatives are among the most efficient materials studied for both polymer solar cells (PSCs) and organic field-effect transistors (OFETs) applications. We report here the synthesis of new fluorinated dithienyldiketopyrrolopyrrole (fDT-DPP) monomers suitable for direct heteroarylation polymerization. fDT-DPP copolymers were then prepared to probe the effect of the fluorination. It was found that they feature deeper HOMO energy levels and smaller bandgaps than their non-fluorinated analogues. Moreover, some fDT-DPP copolymers show ambipolar behavior when tested in OFETs. For example, P2 shows hole mobility up to 0.8 cm2 V-1 s-1 and electron mobility up to 0.5 cm2 V-1 s-1. Inverted PSCs with power conversion efficiency (PCE) up to 7.5% were also obtained for P5. These results reported here (OFETs and PSCs) confirm that the fluorination of dithienyl-DPP moieties improves the performance of organic electronics devices. This study is also evidencing the strength of the direct heteroarylation polymerization and fDT-DPP as a new class of conjugated polymers. [ABSTRACT FROM AUTHOR]

A series of discotic liquid crystals based on hexapentyloxytriphenylene (HAT5) have been investigated where one out of the six ether side chains of a triphenylene core was replaced by an ester side chain and named for 5a-5h. During the process of studying these compounds, the characteristic straight line defect of ordered columnar structure was identified by polarizing optical microscopy (POM) and liquid crystal state over a wide temperature range was obtained by differential scanning calorimetry (DSC). Basic phase structure and molecular arrangement were assigned by one-dimensional wide-angle X-ray diffraction (1D WAXD), small-angle X-ray scattering (SAXS), two-dimensional wide-angle X-ray diffraction (2D WAXD), and transmission electron microscope (TEM). Combined with sharp and regular dots in 2D WAXD patterns and characteristic peaks at small angle in SAXS pattern which indicated the existence of superlattice, we proved that 2D superlattice formed from self-assembly of discotic molecules with a polar group via π-π stacking and dipole-dipole interaction. In order to verify the effect of orientation on charge carrier mobility, their electron and hole mobilities were measured by time-of-flight (TOF) device, among which the charge carrier mobility could achieve almost twice as that of HAT5. The formation of superlattice no doubt improved their electronic properties and made them more attractive in organic electronics. [ABSTRACT FROM AUTHOR]

A new organic electro-optic (EO) molecule was designed with two modifications aimed at increasing acentric order. The molecule is based on the well-known CLD donor-π bridge-acceptor template. The first structural modification introduces rigid aromatic fluorenyl and naphthyl site-isolation units (sterically bulky functional groups) to reduce aggregation. Site isolation units have been used in the past, but this is the first time that both the "front" and "back" of the CLD tetraene bridge have been modified with site-isolation units, and we had to introduce new synthetic methodology to do so. The second design element was the inclusion of cooperatively interacting aromatic dendron (HD) and fluoroaromatic dendron (FD) side groups to increase the acentric order. HD/FD units have previously been successfully used to increase EO performance, but we changed their location on the chromophore: they are attached to the donor and acceptor ends of the molecule to better match side chain ordering with the dipole moment of the molecule. Comparison chromophores were synthesized with alkyl (-MOM), hydroxyl (-OH), or HD units on the acceptor end of the molecule and either the traditional CLD bridge (T-bridge) or modified bridge (BB-bridge) for a family of eight chromophores. The HD/FD units increased glass transition temperature, Tg, by 4-21 °C, and the bulky bridge modification increased Tg by 27-44 °C, which is very beneficial as that results in extra thermal stability of the poling-induced acentric order. UV/vis absorbance spectroscopy shows that the site-isolation units reduce aggregation. Unfortunately, poor film formation of the neat materials precluded full chromophore evaluation in poling and r33 experiments. The EO performance obtained for HD-BB-FD and HD-BB-OH was lower than expected, with r33/Ep ≈ 1 nm2 V-2 at 1310 nm. We found that blending in 25 wt % YLD124 improved film-forming and poling efficiency. Due to the effect of blending and improved site isolation, r33/Ep improved to 2.1-2.3 nm2 V-2 for 3:1 HD-BB-FD:YLD124, HD-BB-OH:YLD124, and HD-BB-MOM:YLD124, and r33 as high as 351 pm V-1 was obtained with 3:1 HD-BB-MOM:YLD124. Chromophore blends were also evaluated in plasmonic organic hybrid (POH) phase modulators with slot lengths of 5-20 μm. In POH devices, r33 was as high as 325 pm V-1 at 1260 nm and 220 pm V-1 at 1520 nm. Overall, the increase in acentric order afforded by the HD/FD interactions was found to be small and resulted in no increase in r33 due to the reduced number density. Ultimately, the increase in r33/Ep afforded by the site isolation and blending resulted in a modest increase in r33/Ep relative to YLD124, but combined with the increased Tg, the chromophore system is a significant improvement and points to an important design strategy. [ABSTRACT FROM AUTHOR]

The organic electronic ion pump (OEIP) has been developed as an "iontronic" tool for delivery of biological signaling compounds. OEIPs rely on electrophoretically "pumping" charged compounds, either at neutral or shifted pH, through an ion-selective channel. Significant shifts in pH lead to an abundance of H+ or OH-, which are delivered along with the intended substance. While this method has been used to transport various neurotransmitters, the role of pH has not been explored. Here we present an investigation of the role of pH on OEIP transport efficiency using the neurotransmitter γ-aminobutyric acid (GABA) as the model cationic delivery substance. GABA transport is evaluated at various pHs using electrical and chemical characterization and compared to molecular dynamics simulations, all of which agree that pH 3 is ideal for GABA transport. These results demonstrate a useful method for optimizing transport of other substances and thus broadening OEIP applications. [ABSTRACT FROM AUTHOR]

Organic and printed electronics integration has the potential to revolutionize many technologies, including biomedical diagnostics. This work demonstrates the successful integration of multiple printed electronic functionalities into a single device capable of the measurement of hydrogen peroxide and total cholesterol. The single-use device employed printed electrochemical sensors for hydrogen peroxide electroreduction integrated with printed electrochromic display and battery. The system was driven by a conventional electronic circuit designed to illustrate the complete integration of silicon integrated circuits via pick and place or using organic electronic circuits. The device was capable of measuring 8 µL samples of both hydrogen peroxide (0-5 mM, 2.72 x 10-6 A·mM-1) and total cholesterol in serum from 0 to 9 mM (1.34 x 10-8 A·mM-1, r² = 0.99, RSD < 10%, n = 3), and the result was output on a semiquantitative linear bar display. The device could operate for 10 min via a printed battery, and display the result for many hours or days. A mobile phone "app" was also capable of reading the test result and transmitting this to a remote health care provider. Such a technology could allow improved management of conditions such as hypercholesterolemia. [ABSTRACT FROM AUTHOR]

Solid state packing plays a critical role in molecular materials to be applied within the area of organic electronics since the arrangement of molecules conditions the quality of the charge transport. Due to the difficulty in accurately predicting the crystal packing simply from the molecular structure, the design of molecules which can self-organize using strategically located functional groups becomes a useful approach to induce certain order directed by noncovalent interactions. The orientation of these interactions can be intentionally controlled from the early stage of molecular design and contribute to restrict the randomness of molecular arrangement in the solid state. Herein, we describe the synthesis and solid state characterization of a novel fused polyheteroaromatic system incorporating hydrogen bond donor and acceptor sites directly into a pentacyclic structure without disrupting its conjugation. A comparative study with an analogous system without hydrogen bond acceptor sites shows the remarkable effect of the hydrogen bond-directed assembly on the crystal packing and the benefits on the π-π intermolecular overlap, crucial for charge transport processes in organic semiconductors. [ABSTRACT FROM AUTHOR]

An organic soluble precursor polymer was prepared by direct (hetero)arylation polymerization of 3,4-ethylenedioxythiophene (EDOT) with a solubilizing, 3,4-propylenedioxythiophene (ProDOT) derivative bearing ester-functionalized side chains. Chemical defunctionalization of the polymer, using base to hydrolyze the esters, yields a conjugated polyelectrolyte (CPE) that is readily soluble in water. This aqueous soluble CPE can then be processed using high-throughput coating methods from water-based inks. Postprocessing functionalization of the polymer film using dilute acid creates a solvent resistant film that is compatible with both organic and aqueous electrolyte systems for redox switching. The introduction of an unfunctionalized EDOT unit results in a soluble polymer that has a low oxidation potential and that is highly electroactive and pseudocapacitive in a wide voltage range (2 V in propylene carbonate-based electrolytes and 1.55 V in aqueous electrolytes) making it an attractive material for lightweight and flexible supercapacitors. Films of this copolymer demonstrate exceptionally rapid redox switching (10 V/s) and higher mass capacitance in aqueous electrolyte solutions than in organic solutions. Supercapacitors incorporating the solvent resistant copolymer exhibit symmetric charge/discharge behavior at currents of up to 20 A/g (1 s discharge) and are able to maintain >75% of the initial capacitance over 175 000 cycles using 0.5 M NaCl/water as the device electrolyte. Rapid electrochromic switching (~0.2 s) from vibrant blue to colorless is also maintained in this salt-water electrolyte. The versatility of this polymer is further shown in a series of organic and aqueous electrolyte systems, including biologically compatible electrolytes (NaCl/water, Ringer's solution, and human serum) and even sport drinks (Gatorade and Powerade), demonstrating the robustness of this polymer to differing ionic conditions. Based on these results, it is apparent that this polymer and similar systems have great potential in multiple electrochemical applications such as electrochromic devices, supercapacitors, and biocompatible devices. [ABSTRACT FROM AUTHOR]

Periodically eclipsed π-stacking columns in two-dimensional covalent organic frameworks (2D COFs) could function as direct channel paths for charge carrier transport. Incorporating a well-defined 2D COF into organic electronic devices, however, is still a challenge. Herein, we have reported the solvothermal synthesis of a COFTFPy-PPDA film on single-layer graphene (SLG), which was constructed via covalent imine-type linkage by employing 1,3,6,8-tetrakis(p-formylphenyl)pyrene (TFPy) and p-phenylenediamine (PPDA) as building blocks. A vertical field-effect transistor (VFET) based on the heterostructure of COFTFPy-PPDA film and SLG shows ambipolar charge carrier behavior under lower modulating voltages. Work-function-tunable contact between SLG and COFTFPy-PPDA film and suitable injection barriers of charge carriers lead to the ambipolar transport with high current density on/off ratio (>105) and high on-current density (>4.1 A cm-2). Interfacing 2D COF with graphene for VFET could shed light on the promising application prospect of 2D COFs in organic electronics and optoelectronics. [ABSTRACT FROM AUTHOR]

Nanoclusters are important prenucleation intermediates for colloidal nanocrystal synthesis. In addition, they exhibit many intriguing properties originating from their extremely small size lying between molecules and typical nanocrystals. However, synthetic control of multicomponent semiconductor nanoclusters remains a daunting goal. Here, we report on the synthesis, doping, and transformation of multielement magic-sized clusters, generating the smallest semiconductor alloys. We use Lewis acid-base reactions at room temperature to synthesize alloy clusters containing three or four types of atoms. Mass spectrometry reveals that the alloy clusters exhibit "magic-size" characteristics with chemical formula of Znx Cd13-x Se13 (x = 0-13) whose compositions are tunable between CdSe and ZnSe. Successful doping of these clusters creates a new class of diluted magnetic semiconductors in the extreme quantum confinement regime. Furthermore, the important role of these alloy clusters as prenucleation intermediates is demonstrated by low temperature transformation into quantum alloy nanoribbons and nanorods. Our study will facilitate the understanding of these novel diluted magnetic semiconductor nanoclusters, and offer new possibilities for the controlled synthesis of nanomaterials at the prenucleation stage, consequently producing novel multicomponent nanomaterials that are difficult to synthesize. [ABSTRACT FROM AUTHOR]

Building blocks having a high degree of backbone planarity, good solubilizing characteristics, and well-tailored physicochemical properties are highly desirable for constructing high-performance polymer semiconductors. Due to the detrimental steric hindrance created by alkyl chain substituents at the 3- and 3'-positions of bithiophene, "head-to-head" linkage containing 3,3'-dialkyl-2,2'-bithiophenes (BTR) are typically avoided in materials design. Replacing alkyl chains with less steric demanding alkynyl chains should greatly reduce steric hindrance by eliminating two H atoms at the sp-hybridized carbon center. Here we report the synthesis of a novel electron donor unit, 3,3'-dialkynyl-2,2'-bithiophene (BTRy), and its incorporation into conjugated polymer backbones. The alkynyl-functionalized head-to-head bithiophene linkage yields polymers with good solubility without sacrificing backbone planarity; the BTRy-based polymers show a high degree of conjugation with a narrow bandgap of -1.6 eV. When incorporated into organic thin-film transistors, the polymers exhibit substantial hole mobility, up to 0.13 cm² V-1 s-1 in top-gated transistors. The electron-withdrawing alkynyl substituents lower the frontier molecular orbitals, imbuing the difluorobenzothiadiazole and difluorobenzoxadiazole copolymers with remarkable ambipolarity: electron mobility > 0.05 cm² V-1 s-1 and hole mobility -0.01 cm² V-1 s-1 in bottom-gated transistors. In bulk-heterojunction solar cells, the BTRy-based polymers show promising power conversion efficiencies approaching 8% with very large Voc values of 0.91-1.04 V, due to the weak electron-withdrawing alkynyl substituents. In comparison to the tetrathiophene-based polymer analogues based on the unsubstituted π-spacer design, the BTRy-based polymers have comparable light absorption but with 0.14 V larger open-circuit voltage, translating to enhanced optoelectronic properties for this attractive design strategy. Thus, alkynyl groups are versatile semiconductor substituents, offering good solubility, substantial backbone planarity, optimized optoelectronic properties, and film crystallinity, for materials innovation in organic electronics. [ABSTRACT FROM AUTHOR]

Since the interfacial order of conjugated polymers plays an essential role for the performance of field-effect transistors, comprehensive understanding on the charge carrier transport in ultrathin semiconducting films below thicknesses of 10 nm is required for the development of transparent and flexible organic electronics. In this study, ultrathin films based on poly(3-hexylthiophene) as conjugated polymer model system with a thickness range from single monolayer up to several multilayers are investigated in terms of microstructure evolution and electrical properties of different molecular weights. Interestingly, a characteristic leap in field-effect mobility is observed for films with thickness greater than four layers. This threshold mobility regarding film thickness is attributed to the transition from 2D to 3D charge carrier transport along with an increased size of the P3HT aggregates in the upper layers of the film. These results disclose key aspects on the role of the film interlayer on the charge carrier transport through conjugated polymers in transistors. [ABSTRACT FROM AUTHOR]

Pentacene is one of the most investigated candidates for organic thin film transistor (OTFT) applications over the last few decades even though it unstable in air (Eg = 1.80 eV), owing in part to its planar nature and high charge-transfer mobilities as both a single crystal (35 cm2 V-1 s-1) and as a thin-film (3.0 cm2 V-1 s-1). Until now, picene is the only isomer of pentacene to be investigated for organic electronic applications, due to its greater stability (Eg = 4.21 eV) and high-charge transfer mobility (3.0 cm2 V-1 s-1); even benefiting from oxygen doping. In the present study, a total of 12 fused-ring isomers (including pentacene, picene and ten other structures) of the formula C22H14 were analyzed and investigated for their electronic and optical properties for worth in OTFT applications. We screened several pure and hybrid DFT functionals against the experimental frontier molecular orbitals (FMOs) of pentacene, then deployed Marcus Theory, Koopmans' Theorem and Green's function with the P3 electron propagator variant, for the internal hole reorganization energy, the hole transfer integral (via the "splitting-in-dimer method" at d = 3.0, 3.5, and 4.0 Å), the charge transfer rate constant, and vertical ionization energies. Using these as a basis, we studied pentacene's isomers and found that the four nonplanar structures, namely, benzo[g]chrysene (3), naphtho[c]phenanthrene (7), benzo[c]chrysene (11) and dibenzo[c,c']phenthrene (12), are (I) more stable than pentacene, by up to 2 eV, and (II) have relatively similar ionization energies (7.5-7.6 eV) to those of picene's experimental value (7.51 eV). The largest charge transfer rates at 3.5 Å dimer separations were given by the isomers benzo[b]chrysene 4, naphtha[c]phenanthrene 7, dibenzo[a,c]anthracene 8 and benzo[a]tetracene 10 and found to be 2.92, 1.72, 1.30, and 3.09 × 1014 s-1 respectively. In comparison to that of pentacene (KCT = 3.97 × 1014 s-1), these unusual isomers are thus promising air-stable and alternative candidates for organic electronic applications. [ABSTRACT FROM AUTHOR]

Upon film growth by physical vapor deposition, the preferential orientation of polar organic molecules can result in a nonzero permanent dipole moment (PDM) alignment, causing a macroscopic film polarization. This effect, known as spontaneous orientation polarization (SOP), was studied in the case of different phosphine oxides (POs). We investigate the control of SOP by molecular design and film-growth conditions. Our results show that using less polar POs with just one phosphor-oxygen bond yields an exceptionally high degree of SOP with the so-called giant surface potential (slope), reaching more than 150 mV nm -1 in a neat bis-4-( N -carbazol(yl)phenyl)phenyl phosphine oxide (BCPO) film grown at room temperature. Additionally, by altering the evaporation rate and substrate temperature, we are able to control the SOP magnitude over a broad range from 0 to almost 300 mV nm -1 . Diluting BCPO in a nonpolar host enhances the PDM alignment only marginally, but combining temperature control with dipolar doping can result in highly aligned molecules with more than 80% of their PDMs standing upright on the substrate on average.

Organic light-emitting transistors (OLETs) are multifunctional optoelectronic devices that combine in a single structure the advantages of organic light-emitting diodes (OLEDs) and organic field-effect transistors (OFETs). However, low charge mobility and high threshold voltage are critical hurdles to practical OLET implementation. This work reports on the improvements obtained by using polyurethane films as a dielectric layer material in place of the standard poly(methyl methacrylate) (PMMA) in OLET devices. It was found that polyurethane drastically reduces the number of traps in the device, thereby improving electrical and optoelectronic device parameters. In addition, a model was developed to rationalize an anomalous behavior at the pinch-off voltage. Our findings represent a step forward to overcome the limiting factors of OLETs that prevent their use in commercial electronics by providing a simple route for low-bias device operation.

Covalent organic frameworks (COFs), formed by reversible condensation of rigid organic building blocks, are crystalline and porous materials of great potential for catalysis and organic electronics. Particularly with a view of organic electronics, achieving a maximum degree of crystallinity and large domain sizes while allowing for a tightly π-stacked topology would be highly desirable. We present a design concept that uses the 3D geometry of the building blocks to generate a lattice of uniquely defined docking sites for the attachment of consecutive layers, thus allowing us to achieve a greatly improved degree of order within a given average number of attachment and detachment cycles during COF growth. Synchronization of the molecular geometry across several hundred nanometers promotes the growth of highly crystalline frameworks with unprecedented domain sizes. Spectroscopic data indicate considerable delocalization of excitations along the π-stacked columns and the feasibility of donor–acceptor excitations across the imine bonds. The frameworks developed in this study can serve as a blueprint for the design of a broad range of tailor-made 2D COFs with extended π-conjugated building blocks for applications in photocatalysis and optoelectronics. [ABSTRACT FROM AUTHOR]

Conspectus: Conjugated polymer zwitterions (CPZs) are neutral, hydrophilic, polymer semiconductors. The pendent zwitterions, viewed as side chain dipoles, impart solubility in polar solvents for solution processing, and open opportunities as interfacial components of optoelectronic devices, for example, between metal electrodes and organic semiconductor active layers. Such interlayers are crucial for defining the performance of organic electronic devices, e.g., field-effect transistors (OFETs), light-emitting diodes (OLEDs), and photovoltaics (OPVs), all of which consist of multilayer structures. The interlayers reduce the Schottky barrier height and thus improve charge injection in OFETs and OLEDs. In OPVs, the interlayers serve to increase the built-in electric potential difference (Vbi) across the active layer, ensuring efficient extraction of photogenerated charge carriers. In general, polar and even charged electronically active polymers have gained recognition for their ability to modify metal/semiconductor interfaces to the benefit of organic electronics. While conjugated polyelectrolytes (CPEs) as interlayer materials are well-documented, open questions remain about the role of mobile counterions in CPE-containing devices. CPZs possess the processing advantages of CPEs, but as neutral molecules lack any potential complications associated with counterions. The electronic implications of CPZs on metal electrodes stem from the orientation of the zwitterion dipole moment in close proximity to the metal surface, and the resultant surface-induced polarization. This generates an interfacial dipole (Δ) at the CPZ/metal interface, altering the work function of the electrode, as confirmed by ultraviolet photoelectron spectroscopy (UPS), and improving device performance. An ideal cathode interlayer would reduce electrode work function, have orthogonal processability to the active layer, exhibit good film forming properties (i.e., wettability/uniformity), prevent exciton quenching, possess optimal electron affinity that neither limits the work function reduction nor impedes the charge extraction, transport electrons selectively, and exhibit long-term stability. Our recent discoveries show that CPZs achieve many of these attributes, and are poised for further expansion and development in the interfacial science of organic electronics. This Account reviews a recent collaboration that began with the synthesis of CPZs and a study of their structural and electronic properties on metals, then extended to their application as interlayer materials for OPVs. We discuss CPZ structure–property relationships based on several material platforms, ranging from homopolymers to copolymers, and from materials with intrinsic p-type conjugated backbones to those with intrinsic n-type conjugated backbones. We discuss key components of such interlayers, including (i) the origin of work function reduction of CPZ interlayers on metals; (ii) the role of the frontier molecular orbital energy levels and their trade-offs in optimizing electronic and device properties; and (iii) the role of polymer conductivity type and the magnitude of charge carrier mobility. Our motivation is to present our prior use and current understanding of CPZs as interlayer materials in organic electronics, and describe outstanding issues and future potential directions. [ABSTRACT FROM AUTHOR]

Organic dyes have been used as gain medium for lasers since the 1960s, long before the advent of today's organic electronic devices. Organic gain materials are highly attractive for lasing due to their chemical tunability and large stimulated emission cross section. While the traditional dye laser has been largely replaced by solid-state lasers, a number of new and miniaturized organic lasers have emerged that hold great potential for lab-on-chip applications, biointegration, low-cost sensing and related areas, which benefit from the unique properties of organic gain materials. On the fundamental level, these include high exciton binding energy, low refractive index (compared to inorganic semiconductors), and ease of spectral and chemical tuning. On a technological level, mechanical flexibility and compatibility with simple processing techniques such as printing, roll-to-roll, self-assembly, and soft-lithography are most relevant. Here, the authors provide a comprehensive review of the developments in the field over the past decade, discussing recent advances in organic gain materials, which are today often based on solid-state organic semiconductors, as well as optical feedback structures, and device fabrication. Recent efforts toward continuous wave operation and electrical pumping of solid-state organic lasers are reviewed, and new device concepts and emerging applications are summarized. [ABSTRACT FROM AUTHOR]

A series of three homologous arene[2,3-d]-oxazole-2-thiols (benzoxazole-2-thiol (BOxSH), naphthaleneoxazole-2-thiol (NOxSH), and anthraceneoxazole-2-thiol (AOxSH)) were deposited onto Au(111) to obtain surfaces suitable as injection layers for organic electronics. The guiding idea was that the increasingly extended conjugated system would lower the band gap of the films while the introduction of the annulated heteroaromatic ring would provide the opportunity for pseudosymmetric attachment of the sulfur anchor, what should lower the conformational freedom of the system. In fact, the annulation of the oxazole ring lowers the optical band gaps of the parent compounds to 3.1-4.0 eV, depending on the number of benzene rings. To characterize the respective monolayers, a variety of spectroscopic techniques such as ellipsometry, infrared reflection-absorption spectroscopy, X-ray photoelectron spectroscopy, and near-edge X-ray absorption fine structure spectroscopy have been utilized. The monolayers of BOxS exhibit a lower film quality than those of NOxS and AOxS, with enhanced molecular density and more upright molecular orientation with increasing molecular length. Infrared spectroscopy suggests that the nitrogen atoms of the oxazole rings are located more closely to the Au(111) surface than the oxygen atoms, although no hints for an electronic interaction between the N atoms and the gold surface could be found. This preferred orientation could be tentatively traced to packing effects, solving a conundrum of the literature. [ABSTRACT FROM AUTHOR]

Transparent butyl rubber is a new elastomer that has the potential to revolutionize stretchable electronics due to its intrinsically low gas permeability. Encapsulating organic electronic materials and devices with transparent butyl rubber protects them from problematic degradation due to oxygen and moisture, preventing premature device failure and enabling the fabrication of stretchable organic electronic devices with practical lifetimes. Here, we report a methodology to alter the surface chemistry of transparent butyl rubber to advance this material from acting as a simple device encapsulant to functioning as a substrate primed for direct device fabrication on its surface. We demonstrate a combination of plasma and chemical treatment to deposit a hydrophilic silicate layer on the transparent butyl rubber surface to create a new layered composite that combines Si-OH surface chemistry with the favorable gas-barrier properties of bulk transparent butyl rubber. We demonstrate that these surface Si-OH groups react with organosilanes to form self-assembled monolayers necessary for the deposition of electronic materials, and furthermore demonstrate the fabrication of stretchable gold wires using nanotransfer printing of gold films onto transparent butyl rubber modified with a thiol-terminated self-assembled monolayer. The surface modification of transparent butyl rubber establishes this material as an important new elastomer for stretchable electronics and opens the way to robust, stretchable devices. [ABSTRACT FROM AUTHOR]

Heterogeneous polymer coatings, such as those used in organic electronics and medical devices, are of increasing industrial importance. In order to advance the development of these types of systems, analytical techniques are required which are able to determine the elemental and molecular spatial distributions, on a nanometer scale, with very high detection efficiency and sensitivity. The goal of this study was to investigate the suitability of laser postionization secondary neutral mass spectrometry (Laser-SNMS) with a 157 nm postionization laser beam to image structured polymer mixtures and compare the results with time-of-flight secondary ion mass spectrometry (ToF-SIMS) measurements using Bi3+ primary ions. The results showed that Laser-SNMS is better suited than ToF-SIMS for unambiguous detection and submicrometer imaging of the wide range of polymers investigated. The data also showed that Laser-SNMS has the advantage of being much more sensitive (in general higher by more than an order of magnitude and peaking at up to 3 orders of magnitude) than ToF-SIMS while also showing superior performance on topographically complex structured insulating surfaces, due to significantly reduced field effects and a higher dynamic range as compared to ToF-SIMS. It is concluded that Laser-SNMS is a powerful complementary technique to ToF-SIMS for the analysis of heterogeneous polymers and other complex structured organic mixtures, providing submicrometer resolution and high sensitivity. [ABSTRACT FROM AUTHOR]

Conspectus: Photoinitiated polymerization has been the subject of continued research efforts due to the numerous applications in which this polymerization technique is involved (coatings, inks, adhesives, optoelectronic, laser imaging, stereolithography, nanotechnology, etc.). More recently, photopolymerization has received renewed interest due to the emergence of 3D-printing technologies. However, despite current academic and industrial interest in photopolymerization methodologies, a major limitation lies in the slow rates of photopolymerization. The development of new photoinitiating systems aimed at addressing this limitation is an active area of research. Photopolymerization occurs through the exposure of a curable formulation to light, generating radical and/or cationic species to initiate polymerization. At present, photopolymerization is facing numerous challenges related to safety, economic and ecological concerns. Furthermore, practical considerations such as the curing depth and the competition for light absorption between the chromophores and other species in the formulation are key parameters drastically affecting the photopolymerization process. To address these issues, photoinitiating systems operating under low intensity visible light irradiation, in the absence of solvents are highly sought after. In this context, the use of photoredox catalysis can be highly advantageous; that is, photoredox catalysts can provide high reactivities with low catalyst loading, permitting access to high performance photoinitiating systems. However, to act as efficient photoredox catalysts, specific criteria have to be fulfilled. A strong absorption over the visible range, an ability to easily oxidize or reduce as well as sufficient photochemical stability are basic prerequisites to make these molecules desirable candidates for photoredox catalysis. Considering the similarity of requirements between organic electronics and photopolymerization, numerous materials initially designed for applications in organic electronics have been revisited in the context of photopolymerization. Organic electronics is a branch of electronics and materials science focusing on the development of semiconductors devoted to three main research fields; organic light-emitting diodes (OLEDs), organic field-effect transistors (OFETs), and organic solar cells (OSCs). The contribution of organic electronics to the field of electronics is important as it paves the way toward cheaper, lighter, and more energy efficient devices. In the present context of photopolymerization, materials that were investigated as photocatalysts were indifferently organic semiconductors used for transistors, charge-transport materials, and light-emitting materials used in electroluminescent devices or conjugated polymers and small molecule dyes for solar cells. In this Account, we summarize our latest developments in elaborating on photocatalytic systems based on these new classes of compounds. Through an in-depth understanding of the parameters governing their reactivities and our efforts to incorporate these materials into photoinitiating systems, we provide new knowledge and a valuable insight for future prospects. [ABSTRACT FROM AUTHOR]

Tuning the work function of the electrode is one of the crucial steps to improve charge extraction in organic electronic devices. Here, we show that N,N-dialkyl dithiocarbamates (DTC) can be effectively employed to produce low work function noble metal electrodes. Work functions between 3.1 and 3.5 eV are observed for all metals investigated (Cu, Ag, and Au). Ultraviolet photoemission spectroscopy (UPS) reveals a maximum decrease in work function by 2.1 eV as compared to the bare metal surface. Electronic structure calculations elucidate how the complex interplay between intrinsic dipoles and dipoles induced by bond formation generates such large work function shifts. Subsequently, we quantify the improvement in contact resistance of organic thin film transistor devices with DTC coated source and drain electrodes. These findings demonstrate that DTC molecules can be employed as universal surface modifiers to produce stable electrodes for electron injection in high performance hybrid organic optoelectronics. [ABSTRACT FROM AUTHOR]

Current static-state explorations of organic semiconductors for optimal material properties and device performance are hindered by limited insights into the dynamically changed molecular states and charge transport and energy transfer processes upon device operation. Here, we propose a simple yet successful strategy, resonance variation-based dynamic adaptation (RVDA), to realize optimized self-adaptive properties in donor–resonance–acceptor molecules by engineering the resonance variation for dynamic tuning of organic semiconductors. Organic light-emitting diodes hosted by these RVDA materials exhibit remarkably high performance, with external quantum efficiencies up to 21.7% and favorable device stability. Our approach, which supports simultaneous realization of dynamically adapted and selectively enhanced properties via resonance engineering, illustrates a feasible design map for the preparation of smart organic semiconductors capable of dynamic structure and property modulations, promoting the studies of organic electronics from static to dynamic. [ABSTRACT FROM AUTHOR]

The possibility of designing programmable thin-film supramolecular structures with spontaneous polarization widens the utility of facile supramolecular chemistry. Although a range of low molecular mass molecular single crystals has been shown to exhibit ferroelectric polarization, demonstration of stimuli-responsive, thin-film, solution-processable supramolecular ferroelectric materials is rare. We introduce aromatic π-electron donor--acceptor molecular systems responsive to multiple stimuli that undergo supramolecular chiral mixed-stack charge-transfer (CT) coassembly through the tweezer-inclusion-sandwich process supported by hydrogen-bonding interactions. The structural synergy originating from hydrogen-bonding and chiral CT interactions resulted in the development of spontaneous unidirectional macroscopic polarization in the crystalline nanofibrous hydrogel network, under ambient conditions. Moreover, the tunability of these interactions with optical, mechanical, thermal, and electrical stimuli allowed the design of multistate thin-film memory devices. Our design strategy of the supramolecular motif is expected to help the development of new molecular engineering strategies for designing potentially useful smart multicomponent organic electronics. [ABSTRACT FROM AUTHOR]

The appearance of surface-induced phases of molecular crystals is a frequently observed phenomenon in organic electronics. However, despite their fundamental importance, the origin of such phases is not yet fully resolved. The organic molecule 6,6'-dibromoindigo (Tyrian purple) forms two polymorphs within thin films. At growth temperatures of 150 °C, the well-known bulk structure forms, while at a substrate temperature of 50 °C, a surface-induced phase is observed instead. In the present work, the crystal structure of the surface-induced polymorph is solved by a combined experimental and theoretical approach using grazing incidence X-ray diffraction and molecular dynamics simulations. A comparison of both phases reveals that π-π stacking and hydrogen bonds are common motifs for the intermolecular packing. In-situ temperature studies reveal a phase transition from the surface-induced phase to the bulk phase at a temperature of 210 °C; the irreversibility of the transition indicates that the surface-induced phase is metastable. The crystallization behavior is investigated ex-situ starting from the sub-monolayer regime up to a nominal thickness of 9 nm using two different silicon oxide surfaces; island formation is observed together with a slight variation of the crystal structure. This work shows that surface-induced phases not only appear for compounds with weak, isotropic van der Waals bonds, but also for molecules exhibiting strong and highly directional hydrogen bonds. [ABSTRACT FROM AUTHOR]

Ultrathin film with thickness below 15 nm of organic semiconductors provides excellent platform for some fundamental research and practical applications in the field of organic electronics. However, it is quite challenging to develop a general principle for the growth of uniform and continuous ultrathin film over large area. Dip-coating is a useful technique to prepare diverse structures of organic semiconductors, but the assembly of organic semiconductors in dip-coating is quite complicated, and there are no reports about the core rules for the growth of ultrathin film via dip-coating until now. In this work, we develop a general strategy for the growth of ultrathin film of organic semiconductor via dip-coating, which provides a relatively facile model to analyze the growth behavior. The balance between the three direct factors (nucleation rate, assembly rate, and recession rate) is the key to determine the growth of ultrathin film. Under the direction of this rule, ultrathin films of four organic semiconductors are obtained. The field-effect transistors constructed on the ultrathin film show good field-effect property. This work provides a general principle and systematic guideline to prepare ultrathin film of organic semiconductors via dip-coating, which would be highly meaningful for organic electronics as well as for the assembly of other materials via solution processes. [ABSTRACT FROM AUTHOR]

Transparent conducting oxides (TCOs), such as indium tin oxide and zinc oxide, play an important role as electrode materials in organic-semiconductor devices. The properties of the inorganic--organic interface--the offset between the TCO Fermi level and the relevant transport level, the extent to which the organic semiconductor can wet the oxide surface, and the influence of the surface on semiconductor morphology--significantly affect device performance. This review surveys the literature on TCO modification with phosphonic acids (PAs), which has increasingly been used to engineer these interfacial properties. The first part outlines the relevance of TCO surface modification to organic electronics, surveys methods for the synthesis of PAs, discusses the modes by which they can bind to TCO surfaces, and compares PAs to alternative organic surface modifiers. The next section discusses methods of PA monolayer deposition, the kinetics of monolayer formation, and structural evidence regarding molecular orientation on TCOs. The next sections discuss TCO work-function modification using PAs, tuning of TCO surface energy using PAs, and initiation of polymerizations from TCO-tethered PAs. Finally, studies that examine the use of PA-modified TCOs in organic light-emitting diodes and organic photovoltaics are compared. [ABSTRACT FROM AUTHOR]

Since being introduced to the open literature in 2010, the isoindigo heterocycle has been extensively studied as a novel electron-deficient building block for organic electronic materials in conjugated polymers, discrete length oligomers, and molecular systems, particularly targeting high charge mobility values and ambipolar transport in organic field effect transistors, along with high power conversion efficiencies in organic photovoltaic devices. This article introduces results obtained on copolymers of isoindigo with thiophene and alkylated terthiophenes to highlight fundamental characteristics in isoindigo-based polymers and the resulting organic field-effect transistors and photovoltaic devices. By comparing and contrasting the optoelectronic properties, thin film morphology, organic field-effect transistor (OFET) mobilities, and organic photovoltaic (OPV) performance to previously reported polymers, structure-processing-property relationships were uncovered. In particular, isoindigo-containing polymers with more rigid backbones and higher coherence lengths in thin films lead to increased charge mobility in OFET devices. In OPV devices, efficiencies over 6% can be obtained by balancing high ionization potentials typically dictating the open-circuit voltage and the charge transfer energy, and blend morphology impacting short-circuit currents. Furthermore, the impact of polymer structure on solubility and on phase separation in blends with PC71M is discussed, with isoindigo-based polymers exhibiting lower solubility possibly leading to more fiber-like morphologies stemming either from polymer dissolution in the casting solvent or from polymer self-assembly during film formation. This fiber-like polymer morphology remains unaffected by the presence of processing additives, such as 1,8-diiodooctane. These structure-property relationships developed for isoindigo-based polymers can also be discussed in the broader context of diketopyrrolopyrrole (DPP) and thienoisoindigo (TiI) as electron-deficient moieties that can also be doubly substituted on their amide functionality. [ABSTRACT FROM AUTHOR]