Search

Background: Pregnant women are a vulnerable population to COVID-19 given an increased susceptibility to severe SARS-CoV-2 infection and pregnancy complications. However, few SARS-CoV-2 serological surveys have been performed among this population to assess the extent of the infection in sub-Saharan countries. The objectives of this study were to determine SARS-CoV-2 seroprevalence among Beninese pregnant women, to identify spatial seropositivity clusters and to analyse factors associated with the infection. Methods: A cross-sectional study including women in their third trimester of pregnancy attending the antenatal care (ANC) clinics at Allada (south Benin) and Natitingou (north Benin) was conducted. Rapid diagnostic tests (RDT) for detection of IgG/IgM against the SARS-CoV-2 spike protein were performed using capillary blood. Seroprevalence of SARS-CoV-2 antibodies and associations between SARS-CoV-2 serostatus and maternal characteristics were analyzed by multivariate logistic regression. Spatial analyses were performed using the spatial scan statistics to identify spatial clusters of SARS-CoV-2 infection. Results: A total of 861 pregnant women were enrolled between May 4 and June 29, 2022. 58/861 (6.7%) participants reported having received COVID-19 vaccine. None of the participants had been diagnosed with COVID-19 during their pregnancy. SARS-CoV-2 antibodies were detected in 607/802 (75.7%; 95% CI 72.56%–78.62%) of unvaccinated participants. Several urban and rural spatial clusters of SARS-CoV-2 cases were identified in Allada and one urban spatial cluster was identified in Natitingou. Unvaccinated participants from Allada with at least one previous morbidity were at a three-times higher risk of presenting SARS-CoV-2 antibodies (OR = 2.89; 95%CI 1.19%-7.00%). Conclusion: Three out of four pregnant women had SARS-CoV-2 antibodies, suggesting a high virus circulation among pregnant women in Benin, while COVID-19 vaccination coverage was low. Pregnant women with comorbidities may be at increased risk of SARS-CoV-2 infection. This population should be prioritized for COVID-19 diagnosis and vaccination in order to prevent its deleterious effects. Trial registration: NCT06170320 (retrospectively registered on December 21, 2023). [ABSTRACT FROM AUTHOR]

Purpose: Group B Streptococcus (GBS) is the leading cause of invasive infections in newborns. The prevention of GBS neonatal disease relies on the administration of an intrapartum antibiotic prophylaxis to GBS-colonized women. In recent years, rapid intrapartum detection of GBS vaginal colonization using real-time nucleic acid amplification tests (NAATs) emerged as an alternative to antenatal culture screening methods. Methods: We compared the performances of two loop-mediated isothermal amplification (LAMP) tests, the Ampliflash® GBS and the PlusLife® GBS tests, to standard culture for GBS detection in vaginal specimens from pregnant women. The study was conducted from April to July 2023 in a French hospital of the Paris area. Results: A total of 303 samples were analyzed, including 85 culture-positive samples (28.1%). The Ampliflash® GBS test and the PlusLife® GBS tests gave a result for 100% and 96.3% tests, respectively. The performances of the tests were as follows: sensitivity 87.1% (95% confidence interval (CI) 78.3–92.6) and 98.7% (95% CI 93.0-99.8), specificity 99.1% (95% CI 96.7–99.8), and 91.9% (95% CI 87.3–95.0), respectively. False negative results of the Ampliflash® GBS test correlated with low-density GBS cultures. Time-to-results correlated with GBS culture density only for the PlusLife® GBS test (p < 0.001). Conclusion: Both techniques provide excellent analytical performances with high sensitivity and specificity together with a short turnaround time and results available in 10 to 35 min. Their potential to further reduce the burden of GBS neonatal disease compared with antenatal culture screening needs to be assessed in future clinical studies. [ABSTRACT FROM AUTHOR]

Due to their chemical and physical properties, rare earth elements (REEs) are essential in modern applications such as energy conversion or IT technology. The increasing demand for these elements leads to strong incentives for REE recovery and induces the exploration of new, alternative sources for REEs. Accessing REEs from clay minerals, in our case kaolinite, by an elution process is a promising method. The present study investigates the potential application of REE recovery through elution with different mineral acids (HNO3, H2SO4, and HCl) in a microwave process. The material used in this study—residues from an industrial kaolin production process—contained 2.47 g/kg REEs which is a significant amount for REE recovery. The ability of various mineral acids to solubilize metals was studied to assess the REE content of this residual resource. Around 1.87 g/kg of REEs was eluted from industrial kaolinite residues in hydrochloric acid, 1.71 g/kg in sulfuric acid, and 1.13 g/kg in nitric acid. [ABSTRACT FROM AUTHOR]

Abstract Background Pregnant women are a vulnerable population to COVID-19 given an increased susceptibility to severe SARS-CoV-2 infection and pregnancy complications. However, few SARS-CoV-2 serological surveys have been performed among this population to assess the extent of the infection in sub-Saharan countries. The objectives of this study were to determine SARS-CoV-2 seroprevalence among Beninese pregnant women, to identify spatial seropositivity clusters and to analyse factors associated with the infection. Methods A cross-sectional study including women in their third trimester of pregnancy attending the antenatal care (ANC) clinics at Allada (south Benin) and Natitingou (north Benin) was conducted. Rapid diagnostic tests (RDT) for detection of IgG/IgM against the SARS-CoV-2 spike protein were performed using capillary blood. Seroprevalence of SARS-CoV-2 antibodies and associations between SARS-CoV-2 serostatus and maternal characteristics were analyzed by multivariate logistic regression. Spatial analyses were performed using the spatial scan statistics to identify spatial clusters of SARS-CoV-2 infection. Results A total of 861 pregnant women were enrolled between May 4 and June 29, 2022. 58/861 (6.7%) participants reported having received COVID-19 vaccine. None of the participants had been diagnosed with COVID-19 during their pregnancy. SARS-CoV-2 antibodies were detected in 607/802 (75.7%; 95% CI 72.56%–78.62%) of unvaccinated participants. Several urban and rural spatial clusters of SARS-CoV-2 cases were identified in Allada and one urban spatial cluster was identified in Natitingou. Unvaccinated participants from Allada with at least one previous morbidity were at a three-times higher risk of presenting SARS-CoV-2 antibodies (OR = 2.89; 95%CI 1.19%-7.00%). Conclusion Three out of four pregnant women had SARS-CoV-2 antibodies, suggesting a high virus circulation among pregnant women in Benin, while COVID-19 vaccination coverage was low. Pregnant women with comorbidities may be at increased risk of SARS-CoV-2 infection. This population should be prioritized for COVID-19 diagnosis and vaccination in order to prevent its deleterious effects. Trial registration NCT06170320 (retrospectively registered on December 21, 2023).

Abstract Thermophilic cyanobacteria thrive in extreme environments, making their thermoresistant enzymes valuable for industrial applications. Common habitats include hot springs, which act as evolutionary accelerators for speciation due to geographical isolation. The family Thermosynechococcaceae comprises thermophilic cyanobacteria known for their ability to thrive in high‐temperature environments. These bacteria are notable for their photosynthetic capabilities, significantly contributing to primary production in extreme habitats. Members of Thermosynechococcaceae exhibit unique adaptations that allow them to perform photosynthesis efficiently at elevated temperatures, making them subjects of interest for studies on microbial ecology, evolution, and potential biotechnological applications. In this study, the genome of a thermophilic cyanobacterium, isolated from a hot spring near Okahandja in Namibia, was sequenced using a PacBio Sequel IIe long‐read platform. Cultivations were performed at elevated temperatures of 40, 50, and 55°C, followed by proteome analyses based on the annotated genome. Phylogenetic investigations, informed by the 16S rRNA gene and aligned nucleotide identity (ANI), suggest that the novel cyanobacterium is a member of the family Thermosynechococcaceae. Furthermore, the new species was assigned to a separate branch, potentially representing a novel genus. Whole‐genome alignments supported this finding, revealing few conserved regions and multiple genetic rearrangement events. Additionally, 129 proteins were identified as differentially expressed in a temperature‐dependent manner. The results of this study broaden our understanding of cyanobacterial adaptation to extreme environments, providing a novel high‐quality genome of Thermosynechococcaceae cyanobacterium sp. Okahandja and several promising candidate proteins for expression and characterization studies.

Abstract Purpose Group B Streptococcus (GBS) is the leading cause of invasive infections in newborns. The prevention of GBS neonatal disease relies on the administration of an intrapartum antibiotic prophylaxis to GBS-colonized women. In recent years, rapid intrapartum detection of GBS vaginal colonization using real-time nucleic acid amplification tests (NAATs) emerged as an alternative to antenatal culture screening methods. Methods We compared the performances of two loop-mediated isothermal amplification (LAMP) tests, the Ampliflash® GBS and the PlusLife® GBS tests, to standard culture for GBS detection in vaginal specimens from pregnant women. The study was conducted from April to July 2023 in a French hospital of the Paris area. Results A total of 303 samples were analyzed, including 85 culture-positive samples (28.1%). The Ampliflash® GBS test and the PlusLife® GBS tests gave a result for 100% and 96.3% tests, respectively. The performances of the tests were as follows: sensitivity 87.1% (95% confidence interval (CI) 78.3–92.6) and 98.7% (95% CI 93.0-99.8), specificity 99.1% (95% CI 96.7–99.8), and 91.9% (95% CI 87.3–95.0), respectively. False negative results of the Ampliflash® GBS test correlated with low-density GBS cultures. Time-to-results correlated with GBS culture density only for the PlusLife® GBS test (p

Sunflower oil (SFO) and Flaxseed oil (FSO) were microencapsulated using simple and complex coacervation techniques with Opuntia (Cactaceae) mucilage (Mu) and with a combination of Mu with chitosan (Chit). The encapsulation efficiency (EE) of SFO and FSO in emulsions using Mu/Chit shells was 96.7% and 97.4%, respectively. Morphological studies indicated successful entrapment of oils in core shells with particle sizes ranging from 1396 ± 42.4 to 399.8 ± 42.3 nm. The thermogravimetric analyses demonstrated enhanced core protection with thermal stability noted for microcapsules regardless of encapsulation method. The stability of the microcapsules, during in vitro digestion was studied. The obtained results revealed that the microcapsules are intact in oral conditions and have a slow release of oil over stomach digestion and rapid release in the small intestine. The results showed that Mu and Mu/Chit coacervates can be used as effective carrier systems to encapsulate sensitive ingredients and functional oils., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

The traditional starch-based intelligent freshness labels struggle to maintain long-term structural stability when exposed to moisture. To solve this problem, we prepared composite crosslinked labels using phytic acid for double crosslinking of corn starch and soybean isolate proteins, with anthocyanin serving as the chromogenic dye. The mechanical properties, hydrophobic characteristics, and pH responsivity of these crosslinked labels were assessed in this study. The prepared double-crosslinked labels showed reduced moisture content (15.96%), diminished swelling (147.21%), decreased solubility (28.55%), and minimized water permeability, which suggested that they have enhanced hydrophobicity and densification. The crosslinked labels demonstrated the ability to maintain morphological stability when immersed in water for 12 h. Additionally, the mechanical properties of the crosslinked labels were enhanced without compromising their pH-sensing capabilities, demonstrated a color response visible to the naked eye for milk and coconut water freshness monitoring, suggesting great potential for application in beverages freshness monitoring., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023. Published by Elsevier Ltd.)

Cellulose-based functional materials play a crucial role in sustainable social development. However, during the material synthesis process, there is typically significant reliance on various solvent systems for macroscopic- or molecular-scale functionalization modifications. In this study, an innovative hydrophobic eutectic solvent (HES) was developed using ethyl cellulose (EC) and thymol (Thy) without any external solvents. Utilizing this homogeneous system, it is convenient to chemically modify the components without any catalyst. Furthermore, a hydrophobic cellulosic cross-linked network (HCCN) can be successfully prepared through in situ photopolymerization. The HCCN film exhibits high transparency, excellent mechanical properties, chemical stability, and durability. The EC/Thy prepolymer system also demonstrates favorable processability for the preparation of various polymeric materials. Additionally, the applicability of other biomasses and derivatives based on the eutectic strategy has been verified. The methodology proposed in this study offers novel insights into the green and solvent-free preparation of biomass functional materials.

Viscosity is a crucial indicator of the flow state of proteins, lipids, and polysaccharides in the cell microenvironment and plays a vital role in maintaining normal cellular activities. Abnormal viscosity in any part of the cell constituents can lead to various diseases in the organism. For instance, abnormal mitochondrial viscosity can lead to diseases, such as diabetes and Parkinson's disease. Therefore, real-time monitoring of changes in mitochondrial viscosity in both pathological and physiological environments is relevant. This study describes a water-soluble xylan-based near-infrared fluorescence probe that can detect changes in cellular viscosity. The designed mitochondria-targeting near-infrared fluorophores were introduced into modified xylan to form a viscosity-sensing fluorescent probe (NI-XylV). The fluorescence intensity of NI-XylV at 590 and 670 nm gradually increases with an increase in viscosity caused by environmental changes, enabling the sensitive detection of viscosity changes in mitochondria within living cells. NI-XylV exhibits good photostability, biocompatibility, excellent mitochondrial targeting, and broad application prospects as a bio-based fluorescence probe.

Algal enzymes are essential catalysts in numerous biological reactions and industrial processes owing to their adaptability and potency. The marketing of algal enzymes has recently risen due to various reasons, including the cost-efficient manner of their cultivation in photobioreactors, the eco-friendly production of high biomass contents, sources of novel enzymes that used in many sectors (biofuel and bioremediation applications), sustainability, and more renewability. Oxidoreductases and hydrolytic enzymes are among the important applied algal enzymes in industrial applications, with annually growing demand. These algal enzymes have opened up new avenues for significant health advantages in reducing and treating oxidative stress, cardiovascular illness, tumors, microbial infections, and viral outbreaks. Despite their promising uses, commercial applications of algal enzymes face many difficulties, such as stability, toxicity, and lower data availability on specific and adequate catalytic mechanisms. Therefore, this review focuses on the algal enzyme types, their uses and advantages over other microbial enzymes, downstream and upstream processing, their commercial and marketing, and their challenges. With the constant development of novel enzymes and their uses, enzyme technology provides exciting options for several industrial sectors., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier B.V.)

Cellulose-based aerogels offer exceptional promise for oily wastewater treatment, but the challenge of low mechanical strength and limited application functions persists. Inspired by the graded porous structures in the animal skeleton and bamboo stem, we firstly report here a stepwise solvent diffusion-induced phase separation approach for constructing the gradient pore-density three-dimensional (3D) cellulose scaffold (GPDS). Benefiting from the regulation of competitive hydrogen bonding between the anti-solvents and the ionic liquid (IL) in cellulose solution, GPDS exhibits the decreased major channels size and increased minor pores amount gradually along the solvent diffusion direction. These endow GPDS with the characteristics of low density (0.019 g/cm) and super strength (high up to 870 KPa). The application of GPDS in the field of oil-water separation has achieved remarkable results, including oil/organic solvent absorption (13-25 g/g GPDS ), immiscible oil-water mixture separation (high efficiency up to 99.8 %, flux > 2000 L/m 2 ·h), and surfactant-stabilized oil-in-water emulsion (efficiency up to 97.7 %). Moreover, a simple hydrophobic treatment further realizes the efficient separation of water-in-oil emulsion (98.5 % efficiency). The as-fabricated GPDS accordingly achieves the multifunctional application in oil-water separation field. Thus, a new avenue is opened to construct 3D cellulose porous scaffold as adsorbent materials in oily wastewater treatment., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Recently, fiber-based and functional paper food packaging has garnered significant attention for its versatility, excellent performance, and potential to provide sustainable solutions to the food packaging industry. Fiber-based food packaging is characterized by its large surface area, adjustable porosity and customizability, while functional paper-based food packaging typically exhibits good mechanical strength and barrier properties. This review summarizes the latest research progress on food packaging based on fibers and functional paper. Firstly, the raw materials used for preparing fiber and functional paper, along with their physical and chemical properties and roles in food packaging, were discussed. Subsequently, the latest advancements in the application of fiber and paper materials in food packaging were introduced. This paper also discusses future research directions and potential areas for improvement in fiber and functional paper food packaging to further enhance their effectiveness in ensuring food safety, quality, and sustainability., Competing Interests: Declaration of competing interest The authors declare they have no conflict of interest., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Cellulose-based aerogels have emerged as highly promising materials for oil-water separation because of their highly porous nature, low bulk density, cost-effectiveness, and functional performance. In this study, a novel, robust, and hydrophobic bacterial cellulose aerogel (HBCA) was reported for highly efficient oil/water separation, which was formed by incorporating methyltrimethoxysilane (MTMS) into sulfonated nano-fibrillated bacterial cellulose (SNBC) matrix through freeze-drying method. The structural integrity of the SNBC/MTMS aerogel was ensured by its three-dimensional linked network structure. The resultant aerogel demonstrated superior hydrophobicity with a contact angle of 152.4°. As an oil-absorbing material, it selectively adsorbed different types of oils and organic solvents, with a saturation adsorption capacity ranging from 42.14 to 85.37 g·g -1 . Additionally, this composite aerogel demonstrated outstanding separation efficiency (98.48 %) in continuous oil-water mixture processes, suggesting promising potential applications in the treatment of industrial oil pollution and oil spill accidents. This study indicates that the proposed HBCA with sulfonated nano-fibrillated bacterial cellulose is a potential and effective material for addressing environmental challenges related to oil contamination., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Polycarboxylate superplasticizers (PCEs) achieve dispersion mainly via steric hindrance from poly(ether) side chains. However, long side chains may cause structural collapse. This study mitigates this issue by introducing sulfonic acid terminations to the long side chains, synthesizing sulfonic-terminated polycarboxylates (PCEPS). Electrostatic repulsion between sulfonic and carboxyl groups on the main chain reduces the level of collapse, enhancing PCE dispersion in cement. PCEPS-4000 showed the strongest dispersion compared with conventional PCEs (PCEC). PCEPS-4000 formed an adsorption layer thickness (ALT) of 11.65 nm, showing a significant improvement over the 7.93 nm observed in the carboxyl-terminated long side chain polycarboxylate (PCETA). Stronger negative charge and lower complexation of sulfonic acid groups enhance the side chain extension. PCEPS also shows good clay tolerance and slump retention, proving its versatility as a concrete admixture.

ZnAl 2 O 4 and CuAl 2 O 4 spinel nanoparticles were prepared by a modified Pechini method and used with the natural chitosan (CS) and shellac (SH) polymers to form novel composite membranes as promising food packaging materials. The selection of ZnAl 2 O 4 and CuAl 2 O 4  spinel nanoparticles was based on their antibacterial characteristics, availability, and economy. Using a straightforward and adaptable solution mixing and casting method, the bio-composites were created. The mechanical, physical, antibacterial, homogeneity and air permeability properties of composite films were investigated. The film structure was evaluated in terms of component interactions using FTIR spectra. The addition of 10% SH increased the tensile strength, percentage strain at maximum load, Young's modulus, and burst strength by 114-101%, 3.6-8.4, 103-119, and 179-153% for low and middle M.wt./CS respectively. Chitosan/shellac-CuAl 2 O 4  composite has superior properties compared to ZnAl 2 O 4  composite. In general, 0.05% spinel provides a composite having better qualities than that of 0.1 additions. Middle M.wt. chitosan provides a composite with superior properties compared to that of low M.wt. The incorporation of ZnAl 2 O 4 or CuAl 2 O 4 enhanced the thermal stability of the SH/CS composite. ZnAl 2 O 4 provides superior thermal stability than CuAl 2 O 4 . When shellac/CS film structure is treated with the previously indicated ZnAl 2 O 4 or CuAl 2 O 4 formulation, the % swelling decreases along with an increasing in the gel fraction. The antimicrobial assessment using inhibition zone diameter and shake flask methods showed that a composite of 1:9 shellac/chitosan/0.05% of CuAl 2 O 4 exerted the highest Gram-positive antibacterial activity against B. mycoides (21 mm), and C. albicans (22 mm). So, these enhancements make chitosan/shellac/ZnAl 2 O 4 or CuAl 2 O 4  composite films a good alternative to producing food packaging materials., Competing Interests: Competing interests The authors declare no competing interests., (© 2024. The Author(s).)

The goal of the current work is to showcase the synthesis of homogeneous pullulan nanofibers that are strengthened by the addition of cellulose nanofibrils (CNF). One of the main difficulties this study faced was determining the ideal water/organic solvent ratio for the electrospinning process, which would allow for the maximum reduction in the amount of organic solvent (DMF or DMSO) needed. The rheological behavior of electrospinning solutions was modulated by varying both, the pullulan concentration and solvent system composition. The amount of CNF in the composition significantly affects the properties of the created nanofibers. When the CNF content increased from 1 % to 5 %, the diameter of the fibers decreases from 284 nm to 90 nm. This is attributed to the enhanced conductivity and surface charge density of the solution jet. The as prepared nanofibres can hold a variety of drugs and can be used to create novel formulations for various biomedical purposes. The nanofibres were tested for salicylic acid incorporation and release. Drug release exhibited zero-order kinetics, suggesting that the concentration remained unaffected by the rate of release. Furthermore, the nanofibres demonstrated remarkable antibacterial activity against both Gram-positive and Gram-negative bacteria., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier B.V.)

Hydrogels used for flexible sensing usually require a good balance between mechanical strength and conductivity. In this study, polyvinyl alcohol/carboxymethyl cellulose/cellulose nanofibers (PVA/CMC/CNF) hydrogels with multi-hierarchical structures were firstly prepared by adjusting the CNF content. Then, PVA/CMC/CNF-xM with excellent mechanical properties and conductivity were prepared by cyclic freezing-thawing and sodium citrate/aluminium chloride (Na 3 Cit/AlCl 3 ) dual ions salt equilibrium methods. Results showed that at an ion concentration of 3 mol/L, PVA/CMC/CNF-3 M hydrogel exhibited a tensile strength, elongation at break and conductivity of 3.41 MPa, 1271 % and 0.35 S/m, respectively. The structural evolution of PVA/CMC/CNF-xM conductive hydrogels were studied, and the results indicated that Cit 3- formed numerous intermolecular hydrogen bonds, while Al 3+ could strongly coordinate with carboxyl and hydroxyl groups between the polysaccharide chains. Meanwhile, PVA/CMC/CNF-3 M possessed a low strain detection limit of 1 %, making it not only can be used for human motion monitoring, but also information encoding and transmission. This work may provide a facile approach for preparing high-strength and conductive hydrogels, which can be applied in flexible wearable electronic devices and information transmission., Competing Interests: Declaration of competing interest The authors declare that they have no conflicts of interest., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Natural laccases are a family of multi‑copper oxidases that can oxidize multiple phenol substrates and of great importance to contaminant remediation and biosensing. However, the construction of substitutes for the expensive and perishable laccase used in harsh conditions remains a great challenge. Here, we reported a novel strategy for the fabrication of copper-doped lignin-based laccase nanozymes (Cu-AL) through the coordination of aminated lignin and different copper sources. The Cu-AL prepared from CuSO 4 , possessed highest Cu content and Cu + proportion, exhibited the best laccase-like activity to various phenols degradation. Strikingly, the thermophilic Cu-AL exhibited superior catalytic activity at 100 °C (3.23 times than that of 60 °C) and durability (> 50 % activity even after 160 days stored in water). Furthermore, a smartphone-based detection platform was successfully developed to achieve the rapid, convenient, and accurate detection of epinephrine concentration. In summary, this work provides a new sustainable and low-cost way to design robust laccase nanozymes from lignocellulose biomass, especially for expanding the applications of enzymatic reaction with high-temperature operation and/or long-term storage in environmental remediation and biosensing., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier B.V.)

A facile green hydrothermal method was developed for the preparation of fluorescent carbon dots (CDs) using sugarcane bagasse (SB) as a raw material. The incorporation of CDs within the hydroxyethyl cellulose-acrylamide hydrogel (HEC-AM) in the presence of glutardehyde (GA) as a crosslinking agent showed bright red emission under fluorescence microscope. The hydroxyethyl cellulose-N-CDs-acrylamide hydrogel (HEC-AM@N-CDs) were used as alternative biocompatible fluorescent probes for imaging and suppression of Gram-negative bacteria such as Escherichia coli (with inhibition zones 13 mm for HEC-AM to 17 mm for HEC-AM@N-CDs) &Helicobacter pylori (with inhibition zones 16 mm for HEC-AM to 13 mm for HEC-AM@N-CDs) and Gram-positive bacteria such as Micrococcus luteus (with inhibition zones 15 mm for HEC-AM to 16 mm for HEC-AM@N-CDs) &Staphylococcus aureus (with inhibition zones 13 mm for HEC-AM to 14 mm for HEC-AM@N-CDs). The N-CDs promote bacterial binding and internalization, leading to differential fluorescence emission depending on the bacteria's cell wall composition. DFT calculations support strong interactions between the bacteria and HEC-AM@N-CDs., Competing Interests: Declaration of competing interest The authors declare no competing interests., (Copyright © 2024. Published by Elsevier B.V.)

Perovskite solar cells (PSCs) are usually modified and passivated to improve their performance and stability. The interface modification and bulk doping are the two basic strategies. Fluorine (F)-containing materials are highly favored because of their unique hydrophobicity and coordination ability. This review discusses the basic characteristics of F, and the basic principles of improving the photovoltaic performance and stability of PSC devices using F-containing materials. We systematically summarized the latest progress in the application of F-containing materials to achieve efficient and stable PSCs on several key interface layers. It is believed that this work will afford significant understanding and inspirations toward the future application directions of F-containing materials in PSCs, and provide profound insights for the development of efficient and stable PSCs., (© 2024 Wiley-VCH GmbH.)

Foam materials possess notable features, including low density, high porosity, low thermal conductivity, and high impact resistance, making them extensively used in various sectors such as construction, transportation, water treatment, and packaging. However, the majority of commercial foam materials are derived from synthetic polymers based on fossil fuels, which raises concerns regarding health and ecology. In this work, we present a straightforward and scalable approach (physical cross-linking and common pressure drying) for fabricating a bio-based foam material using pulp fibers sourced from discarded sugarcane bagasse and sodium alginate extracted from seaweed. The resulting foam material exhibits low density (13.7-20.5 kg/m 3 ), exceptional thermal insulation properties (thermal conductivity as low as 38.6 mW/mK), thermal stability (no deformation at 140 °C), and mechanical strength. After a basic silane modification, it also shows favorable water resistance (with a contact angle of 128°). Moreover, the foam material demonstrates remarkable degradation performance, with a degradation rate exceeding 93.8 % after 90 days of burial in soil. Therefore, this novel method offers a sustainable solution for eco-friendly foam production across various application domains., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier B.V.)

Cellulose material is emerging as a promising alternative to polyolefin separators in lithium-ion batteries (LIBs) due to its wide availability, electrolyte wettability and thermal stability. Based on the non-solvent induced phase separation, dissolving and regenerating the cellulose material by environmentally friendly solvents and non-solvent enables the efficient and pollution-free preparation of porous regenerated cellulose separator (RCS), greatly expanding their application potential in LIBs. However, the mechanical strength of pure RCS still hardly satisfactory, due to the weak intermolecular bonding and loose porous structure. Therefore, this study introduced an acrylic acid/acrylamide (AA/AM) polymer cross-linking system forming an interpenetrating network with the cellulose framework to produce a double network regenerated cellulose separator (DN-RCS) with high mechanical strength and high porosity. At meantime, the special functional group on AA/AM can influence the transport process of Li + and PF 6 - in the electrolyte, helping to form a stable interface on the electrolyte/lithium anode surface to reduce the formation of lithium dendrites. The results showed that DN-RCS possessed excellent mechanical strength and porosity compared to RCS. The high ionic conductivity of DN-RCS (1.03 mS cm -1 ) enabled the assembled cell with excellent cycling stability (90.8 % at 0.5C for 100 cycles) and rate performance (65.2 % at 5C). This work provides a further feasible strategy for the preparation of a high-performance cellulose-based separator., Competing Interests: Declaration of competing interest There are no conflicts of interest to declare in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Lipid droplets (LDs) and lysosomes were dynamic organelles present in most eukaryotic cells that were interconnected and worked closely together to ensure the smooth physiological activities of organisms. The interaction between lipid droplets and lysosomes was thought to play a role in the development of certain diseases. In this paper we designed and synthesised a lipid droplet lysosomal probe. The Nap-Lyso-Ph-OH probe was constructed according to the ICT mechanism and exhibited sensitivity to both polarity and viscosity. The probe exhibited low cytotoxicity, a large Stokes shift, excellent selectivity and photostability. The probe was successfully used for labelling and imaging of lipid droplets and lysosomes in cells and zebrafish. Interestingly, we used tobacco seedling cells to explore the ability of Nap-Lyso-Ph-OH for imaging lipid droplet labelling in plant cells.

Kinsenoside is a rare and valuable glycoside with extensive bioactivities. However, the enzymatic synthesis of kinsenoside has been a challenging task due to the limited enzyme toolbox and unsatisfactory yield. Herein, the β-glucosidase from Dictyoglomus thermophilum (DtBGL) was heterologously expressed, purified and enzymatically characterized. The purified DtBGL was successfully immobilized on the metal-organic frameworks of UiO-66-NH 2 . The DtBGL@UiO-66-NH 2 was fully characterized using SEM, XRD, TGA and FTIR. The studies on enzymatic properties demonstrated that DtBGL@UiO-66-NH 2 exhibited increased catalytic activity and stability compared to the free DtBGL. Particularly, DtBGL@UiO-66-NH 2 could catalyze the synthesis of kinsenoside via the reverse hydrolysis reaction and the kinsenoside yield was 34.12 % under the optimized catalytic system, which was 1.9-fold higher compared with the free DtBGL. Moreover, DtBGL@UiO-66-NH 2 displayed good reusability with a kinsenoside yield of 27.02 % after reuse for 3 times. The present work not only identifies and characterizes a highly active β-glucosidase with reverse hydrolysis activity, but also proposes the immobilized enzyme as an effective catalyst for the industrial production of glycosides., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

High-performance fiber-reinforced composite materials demonstrate great potential for manufacturing diaphragms in human-engineered acoustic loudspeakers. However, the notable scarcity of high-quality fibers and the uncontrollable nature of the diaphragm structure limit the production of high-quality sound that conforms to human hearing. In this study, a novel composite diaphragm material is devloped by integrating the swelling carboxymethyl cellulose microfiber (CMF) with the hot-melted sheath-core fiber (SCF) based on the "interpenetrating polymeric network" ("IPN") strategy. Simulation methods and Flory-Huggins theory are applied to explain the mechanism of fiber-structure-property interaction in composite diaphragm materials. Owing to the distinct microstructure, this bio-based diaphragm material shows superior mechanical characteristics, including low density (≈0.92 g cm - 3 ), high tensile strength (≈235 MPa), and high modulus (≈9.73 GPa). Moreover, the loudspeaker mounted with bio-based diaphragm material exhibits enhanced sensitivity (≈82.6 dB) and stable performance across a broad frequency spectrum. This study not only elucidates the multiphysics working principles of loudspeakers but also establishes a crucial connection between the physical properties of diaphragms and loudspeaker performance. It opens up new avenues for the design of high-performance bio-based loudspeaker diaphragms in high-fidelity (Hi-Fi) acoustic devices., (© 2024 Wiley‐VCH GmbH.)

The cleavage of the benzene-oxygen (C aryl -O(C)) bond of the lignin β-O-4 linkage is expected to relieve condensation of the degradation product and improve the product value. Nevertheless, the electrochemical breaking of the C aryl -O(C) bond has not been achieved yet due to the high dissociation energy (∼409 kJ mol -1 ) and the easy over-reduction of aromatic compounds. Here, we report an aqueous electrochemical reduction strategy for breaking C aryl -O(C) bonds via the regulation of molecular adsorption. The density functional theory (DFT) calculations and quartz crystal microbalance (QCM) measurements reveal that the residual Cu(I) in the CuO electrocatalyst enhances the adsorption of the 2-phenoxy-1-phenylethyl alcohol (PPE) by the C aryl -O(C) bond and lowers the energy barrier of the protons attacking the oxygen atom in the β-O-4 linkage. Thus, compared to the Cu electrocatalyst (with a hydroquinone yield of 47.4% and a benzyl alcohol yield of 24.8%), the CuO nanorod exhibits a much higher yield of hydroquinone (95.3%) and benzyl alcohol (88.6%) at a potential of -0.4 V vs reversible hydrogen electrode (RHE) in an undivided cell. Moreover, the reaction pathway and the cleavage of the C aryl -O(C) bond are identified through a combination of in situ synchrotron-radiation Fourier transformed infrared spectroscopy (SR-FTIR) and DFT calculations. This effective method is utilized for poplar lignin electrolysis, yielding 10.9 wt % of guaiacylglycerol, with an outstanding selectivity of >63.0%. This work provides an efficient and mild method of cleavage of C aryl -O(C) bonds in lignin valorization.

The mechanism underlying the interfacial interaction between ZnO and surface functional groups, which drives the self-assembly of ZnO nanoflowers on the cellulose nanofibril (CNF) surface, remains inadequately understood. Moreover, the ideal sites for the loading and growth of ZnO nanoflowers on the oxygen atoms (O s ) of various surface functional groups on the CNF surface are not well-defined. This work addressed these gaps by systematically regulating the size and surface charge density of CNF templates through minor surface modifications and adjustments in processing cycles by using an ultrafine grinder. Physicochemical analyses demonstrated that the ZnO nanoflowers exhibited sizes (μm)/pieces/thickness (nm) of 0.86/16/20.1 for ZnO/TOCNFs, 0.88/17/20.4 for ZnO/ACNFs, and 0.89/16/20.5 for ZnO/ECNFs, respectively. Simulation calculations revealed that the interaction between Zn 2+ ions and the O s of hydroxyl (-OH) groups exhibited the most favorable binding energy of -31.7 kcal/mol. These findings suggested that the surface charge density rather than specific surface functional groups primarily governs the loading and growth of ZnO nanoflowers on the CNF surface. The O S from -OH groups on the surface of CNF templates were optimal for both the loading and growth of ZnO nanoflowers. Overall, this study provides crucial theoretical insights into the design and optimization of the ZnO/CNF composites.

Psilocin, or 4-HO-DMT (or 3-(2-dimethylaminoethyl)-1H-indol-4-ol), is a psychoactive alkaloid substance from the tryptamine family, isolated from Psilocybe mushrooms. This substance is being studied by various research groups because it has a clear therapeutic effect in certain dosages. In this work, the study of the structure and properties of psilocin was carried using theoretical methods: the effects of polar solvents (acetonitrile, dimethylsulfoxide, water, and tetrahydrofuran) on the structural parameters, spectroscopic properties (Raman, IR, and UV-Vis), frontier molecular orbital (FMO), molecular electrostatic potential (MEP) surface, and nonlinear optical parameters (NLO). Theoretical calculations were performed at the B3LYP/6-311++G(d,p) level by the density functional theory (DFT) method. IEFPCM was used to account for solvent effects. The types and nature of non-covalent interactions (NCI) between psilocin and solvent molecules were determined using Atoms in Molecules (AIM), the reduced density gradient method (RDG), the electron localization function (ELF), and the localization orbital locator (LOL). Experimental and calculated FT-IR, FT-Raman, and UV-Vis spectra were compared and found to be in good agreement., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier B.V.)

Cellulose nanofibrils (CNFs) can serve as an efficient surface enhanced Raman scattering (SERS) platform for in situ detection of trace targets. In this study, a highly reproducible SERS platform based on TEMPO-oxidized CNFs (T-CNFs) was fabricated by the ion-exchange. Self-assembly of silver nanoparticles (AgNPs) was accomplished in only 120 s. The abundant carboxylate groups and good hydrophilicity of T-CNFs facilitated uniform and dense loading of AgNPs over the surface area. The obtained SERS substrate greatly enhanced the Raman signal of different pesticides, and the detection limits of thiram and thiabendazole were 5.81 × 10 -8  M and 9.63 × 10 -8  M, respectively. SERS substrate could produce homogeneous Raman-enhanced signals (relative standard deviation (RSD) = 6.59 %). In addition, due to the good flexibility, SERS substrate could collect and detect pesticide residues from the surface of apples. The intensities of Raman characteristic peak at 1384 cm -1 showed a good linear relationship with the analyte concentrations (0.96 ng/cm 2 -9600 ng/cm 2 ). The constructed SERS substrate provided a theoretical basis for the preliminary rapid screening of hazardous chemical residues in food, which was of great value for the SERS technique to become a routine on-site analysis method for pesticide residues., Competing Interests: Declaration of competing interest The authors state that there are no conflicts of interest to disclose., (Copyright © 2024 Elsevier B.V. All rights reserved.)

As an emerging non-wood resource, moso bamboo has attracted extensive attention because of its short growth cycle and high holocellulose content. However, the internal structure of moso bamboo is more compact than that of wood, leading to higher chemical consumption during the pulping process, which greatly reduces the quality of the extracted fibers. Herein, an innovative pulping system including enzymes and alkali is proposed to achieve higher-quality extraction of moso bamboo fibers. Benefiting from the synergistic effects of high-temperature and alkali-resistant cellulase, xylanase, and laccase, supplemented with alkaline pulping, adequate retention and softening of moso bamboo fibers were ultimately achieved. The sample treated with an enzyme/alkali system resulted in a relative increase in fiber length of 7.19 % and a 31.26 % increase in beating efficiency over alkaline pulping. In addition, the tensile index and tearing index of the paper treated with the enzyme/alkali system reached 50.17 N·m·g -1 and 9.12 mN·m 2 ·g -1 , which were 22.52 % and 20.53 % higher than those of the alkaline pulping, respectively. This work provides new insights into the production of high-performance moso bamboo fibers and paper with low energy and alkali consumption., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier B.V.)

Prussian blue analogs (PBA) exhibit excellent potential for energy storage due to their unique three-dimensional open framework and abundant redox active sites. However, the dissolution of transition metal ions in water can compromise the structural integrity of PBAs, leading to significant issues such as low cycle life and capacity decay. To address these challenges, we proposed a dual-effect additive-modified electrolyte method to alleviate such issues, introducing sodium ferrocyanide (Na 4 Fe(CN) 6 ) into aqueous alkaline electrolytes. It could not only capture Zn 2+ dissolved on the surface of Na 1.86 Zn 1.46 [Fe(CN) 6 ] 0.87 (ZnHCF) electrode material during the cycling process but also conduct redox reactions on the electrode surface to provide additional capacitance. Through experiments and molecular simulation calculations, it showed that Na 4 Fe(CN) 6 can restrict the movement of Zn dissolution into the electrolyte on the electrode surface. Based on this, an asymmetric supercapacitor based on ZnHCF//activated carbon was assembled with a modified electrolyte. The assembled supercapacitor displayed a specific capacitance of 1,329.65 mF cm -2 , a power density of 2,900 mW cm -2 , and an energy density of 388.28 mW h cm -2 . This study provides a new idea for the design and construction of stable and efficient PBA energy storage materials by inhibiting the leaching of transition metals in PBA., (© 2024 Wiley‐VCH GmbH.)

Developing sustainable matrix and efficient bonding mode for preparing room temperature phosphorescence (RTP) materials with full-color afterglows is attractive but still challenging. Here, xylan, a hemicellulose by-product from the paper mill, is used to construct full-color RTP materials based on imine bonds. Xylan is oxidation by periodate to introduce aldehyde groups to increase reaction sites; aromatic amines with different π conjugations can be readily anchored to dialdehyde xylan (DAX) by imine chemistry. The dual rigid environments were constructed by hydrogen bonding and imine covalent bonding, which can facilitate the triplet population and suppress non-radiative transitions, thus the xylan derivatives display satisfactory RTP performances. As the degree of conjugation of the chromophore increases, the afterglow colors can be changed from blue to green, yellow, and then to red. Thus, such a universal, facile, and eco-friendly strategy can be used to fabricate full-color RTP materials, which show a bright future in information encryption and advanced anti-counterfeiting. These results unambiguously state that the biodegradable paper mill waste-based RTP materials are convincingly expected to replace and surpass petroleum polymer-based counterparts., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Food safety and wastage caused by fruit deterioration is a serious global problem. Effective packaging systems for extending the freshness period of fruit play a key role in food safety. In this work, we constructed an eco-friendly and flexible polysaccharide-based packaging film based on hydroxypropyl guar (HPG), cellulose nanocrystals (CNCs), deep eutectic solvents (DES) and anthocyanin (Anth). DES could endow polysaccharide films with multiple hydrogen bond numbers and good stability. Hydroxypropyl guar/cellulose nanocrystals/anthocyanin with 0.2 g deep eutectic solvents (HCA-DES 0.2 ) had good tensile properties, oxygen barrier properties (3.01 cm 3 /m 2 ·day·Pa), water resistance (WCA 111.97°), antibacterial (CFU ˂ 10 3 ), and transparency (55.4 %). The preservation tests of grape and blueberry showed that the shelf life of these two fruits was 12-20 days, and the polysaccharide film had great application potential in fruit preservation., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

In a quest to find eco-friendly materials from renewable resources, researchers have focused on cellulose materials, which is the primary reinforcing component of plant cell walls. Nanocellulose is at the forefront of research due to its wide range of sources, biocompatibility, large surface area and tunable surface chemistry. It has gained considerable attention in various industries as a nano-reinforcement for polymer matrices due to its hierarchical structure (medical and healthcare, oil and gas, packaging, paper, board, composites, printed and flexible electronics, 3D printing, aerogels). In this paper, we have reviewed the recent advances in nanocellulose production, physical properties, structural characterization, surface modification strategies, pretreatment methods, applications, limitations and future directions. This review emphasizes the quantification of nanocellulose extraction and applications of the most prevalent areas of nanocellulose research. In view of its increasing and broader applications, the demand for nanocellulose is expected to increase in the future., Competing Interests: Declaration of competing interest The authors declare no conflict of interest., (Copyright © 2024 Elsevier B.V. All rights reserved.)

This research introduces a novel upcycling method for transforming cigarette filters-an abundant and persistent environmental waste-into high-performance epoxy composites reinforced with cellulose nanofibers. The innovation lies in extracting cellulose acetate nanofibers from used cigarette butts via a multi-step purification and electrospinning process, followed by their conversion into regenerated cellulose nanofibers through alkaline hydrolysis. This dual-fiber approach allows us to fabricate four distinct epoxy composites, each reinforced by different nanofiber types: recycled cellulose acetate nanofibers, regenerated cellulose nanofibers from recycled cigarette filters, and their commercial counterparts. Notably, this is the first time regenerated nanofibers derived from waste cigarette filters have been utilized for epoxy composite reinforcement, demonstrating a sustainable, high-value use for a major pollutant. Comprehensive characterizations, including FTIR, XRD, SEM, and contact angle measurements, confirmed the successful regeneration of cellulose nanofibers, showing improved hydrophilicity, reduced crystallinity, and uniform nanofiber morphology with diameters between 200 and 300 nm. The innovation further extends to the mechanical performance of these composites: tensile tests revealed that those reinforced with regenerated cellulose nanofibers exhibited superior tensile strength (49.5-53.8 MPa), significantly outperforming both cellulose acetate nanofiber composites (40.1-42.6 MPa) and neat epoxy resin (31.4 MPa). This marked improvement is attributed to enhanced nanofiber dispersion and interfacial adhesion within the epoxy matrix, an essential advancement over traditional composites. In addition, thermal analysis showed that all composites maintained thermal stability in the 300-400 °C range, comparable to commercial alternatives. The regenerated nanofiber-reinforced composites also displayed enhanced optical transparency due to reduced light scattering, making them ideal candidates for applications requiring both mechanical strength and optical clarity. By pioneering the use of cigarette filter waste for fabricating advanced cellulose nanofiber composites, this study presents an eco-friendly approach to addressing environmental pollution while creating sustainable materials with superior mechanical, thermal, and optical properties., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

The increasing interest in lignin, a complex and abundant biopolymer, stems from its ability to produce environmentally beneficial biobased products. β-Etherases play a crucial role by breaking down the β-aryl ether bonds in lignin. This comprehensive review covers the latest advancements in β-etherase-mediated lignin valorization, focusing on substrate selectivity, enzymatic oxidative activity, and engineering methods. Research on the microbial origin, protein modification, and molecular structure determination of β-etherases has improved our understanding of their effectiveness. Furthermore, the use of these enzymes in biorefinery processes is promising for enhancing lignin breakdown and creating more valuable products. The review also discusses the challenges and future potential of β-etherases in advancing lignin valorization for biorefinery applications that are economically viable and environmentally sustainable., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)