Search

It is highly demanded to understand the confinement effect on nanoconfined polymers. Recent studies reported a strong perturbation of local dynamics and substantial alteration of glass transition temperature Tg at nanoscale. However, how confinement affects the mechanical properties of polymers is not fully understood. Here, we show that the modulus of thin polymer films could be remarkedly altered through a polymer–polymer interface. The modulus of a thin polystyrene (PS) film next to a polydimethylsiloxane (PDMS) was determined from the PS–PDMS bilayer bulging test. A series of experiments show that the modulus of PS can be increased up to 37%, when the modulus of the neighboring PDMS varies from 1.04 to 4.88 MPa. The results demonstrate a strong sensitivity of mechanical properties of thin polymers to the hard/soft environment, which we attribute to the change of high-mobility layer by the polymer–polymer interface. [ABSTRACT FROM AUTHOR]

This paper builds a cultivation system of innovation and entrepreneurship ability, and puts forward the corresponding cultivation mode and implementation path. At the same time, under the implementation conditions, a multiple linear regression model is used to explore the influence of the integration of aesthetic education on innovation and entrepreneurship ability. The results show that aesthetic interest, aesthetic perception, innovation consciousness and innovation and entrepreneurship ability cultivation are significantly positively correlated, with correlation coefficients of 0.039, 0.025, 0.12 respectively. Multiple covariate diagnosis shows that the model fit is good, the value of VIF is more than 3, and that the influence of aesthetic interest, aesthetic perception, and innovation consciousness on college students’ entrepreneurial intention is significant. In addition, regression analysis showed that the standardized regression coefficient of aesthetic interest on the cultivation of innovation and entrepreneurship was −0.113 (P

Optimizing mechanical performance is crucial for the practical utilization of stimuli-responsive polymers, while complex viscous and elastic behavior hinders a deep understanding of functional polymers under external field excitation. Here, we demonstrate the in situ dynamic and static mechanical responses under electric stimuli of poly(methyl methacrylate) (PMMA) above glass transition temperature (Tg) by applying a direct current electric field vertically to the mechanical loading. The results show that the electro-mechanical response of PMMA is directly correlated to chain relaxation modes with different length scales: for local segments, polarization provides resistance for molecular motion, manifested by enhanced moduli, increased transient viscosity, and a wider linear viscoelastic range, whereas in a larger spatial range, polarization-induced conformation change causes faster relaxation, reduced elastic modulus, and a lowered modulus plateau. Moreover, flow viscosity is reduced because of weaker friction between chain segments under polarization. Our results suggest effective strategies for precisely tuning the viscoelastic behavior of polymers above Tg through electric stimuli. [ABSTRACT FROM AUTHOR]

Ionic conductive hydrogels are widely used in many applications such as electrochemical energy storage, flexible electronic devices, and catalyst transistors due to their excellent ionic conductivity as well as chemical stability. However, the fragile mechanical properties and the lack of shaping methods severely limit their further applications. Herein, an ionic conductive composite hydrogel with reinforced mechanical properties is demonstrated that can be rapidly 3D printed using digital light processing technology. By using both γ‐methacryloxypropyltrimethoxysilane moderately modified attapulgite rigid particle and polyvinyl alcohol (PVA) semicrystal dual‐network reinforcement, the mechanically robust and highly conductive N,N,N‐trimethylethanaminium‐chloride‐based hydrogels are obtained, demonstrating a 5 times higher tensile strength than the initial one due to the turning and orienting of the attapulgite as well as the robust PVA secondary network. Furthermore, encapsulation strategy is used to avoid the dehydration of hydrogel, and strain sensors that exceed the strain limit of the hydrogel are fabricated through structural design. This work provides a reference for attapulgite‐reinforced hydrogel in biosensing. [ABSTRACT FROM AUTHOR]

Reticular chemistry has been a cornerstone in the design of novel 2D materials. Despite numerous possibilities for topological arrangements, only a few with high symmetry can form stable networks. Here, starting from 2D carbons, four types of highly stable tessellations are discovered, which consist of chains of non‐hexagonal rings separated by hexagonal ribbons. A modified Read–Shockley model is established to perfectly describe the stability of these highly stable frameworks, which is based on the interaction between non‐hexagonal rings. Moreover, these four types of tessellations and the modified Read–Shockley model are found to be of general validity in designing highly stable 2D materials, which is verified by the calculations on polymorphs of boron nitride and molybdenum disulfide. Besides, among the studied 2D carbon allotropes, two semi‐metallic structures with highly anisotropic Dirac cones and one semimetal with a Dirac nodal line at the Fermi level are discovered, as protected by their D2h symmetry. Spin‐orbital coupling is further found to open small bandgaps for these three Dirac structures, making them nontrivial topological insulators. The in‐depth understanding of the stability of 2D crystals in this study provides a new way for rational design of 2D crystals that may show peculiar electronic structures. [ABSTRACT FROM AUTHOR]

The remote control ship is considered to be the most likely implementation of maritime autonomous surface ships (MASS) in the near-term future. With collaborative control from onboard controllers and operators ashore, ships may operate in three navigation control modes (NCMs), manual, autonomous, and remote control, based on different levels of control authority. The scientific selection of the appropriate NCM for MASS under multiple driving modes is crucial for ensuring ship navigation safety and holds significant importance for operators and regulatory authorities overseeing maritime traffic within specific areas. To aid in selecting the proper NCM, this study introduces a risk-based comparison method for determining optimal control modes in specific scenarios. Firstly, safety control paths and processes for MASS under different NCMs are constructed and analyzed using system-theoretic process analysis (STPA). By analyzing unsafe system control actions, key Risk Influencing Factors (RIFs) and their interrelationships are identified. Secondly, a Hidden Markov Model (HMM) process risk assessment model is developed to infer risk performance (hidden state) through measuring RIF states. Cloud modeling with expert judgments is utilized to parameterize the HMM while addressing inherent uncertainty. Lastly, the applicability of the proposed framework was verified through simulation case studies. Typical navigation scenarios of conventional ships in coastal waters were chosen, and real-time data collected by relevant sensors during navigation were used as simulation inputs. Results suggest that in the same scenario, process risks differ among the analyzed NCMs. Traffic complexity, traffic density, and current become the primary factors influencing navigation risks, and it is necessary to select the appropriate NCM based on their real-time changes. [ABSTRACT FROM AUTHOR]

Developing highly active materials that efficiently utilize solar spectra is crucial for photocatalysis, but still remains a challenge. Here, we report a new donor-acceptor (D-A) covalent organic framework (COF) with a wide absorption range from 200 nm to 900 nm (ultraviolet-visible-near infrared light). We find that the thiophene functional group is accurately introduced into the electron acceptor units of TpDPP-Py (TpDPP: 5,5'-(2,5-bis(2-ethylhexyl)−3,6-dioxo-2,3,5,6-tetrahydropyrrolo [3,4-c]pyrrole-1,4-diyl)bis(thiophene-2-carbaldehyde), Py: 1,3,6,8-tetrakis(4-aminophenyl)pyrene) COFs not only significantly extends its spectral absorption capacity but also endows them with two-photon and three-photon absorption effects, greatly enhancing the utilization rate of sunlight. The selective coupling of benzylamine as the target reactant is used to assess the photocatalytic activity of TpDPP-Py COFs, showing high photocatalytic conversion of 99% and selectivity of 98% in 20 min. Additionally, the TpDPP-Py COFs also exhibit the universality of photocatalytic selective coupling of other imine derivatives with ~100% conversion efficiency. Overall, this work brings a significant strategy for developing COFs with a wide absorption range to enhance photocatalytic activity. Creating highly active materials that effectively harness solar spectra is essential for photocatalysis, though challenging. Here the authors introduce a novel donor-acceptor covalent organic framework with a broad absorption range of 200 nm to 900 nm, achieving efficient artificial photocatalytic amine coupling. [ABSTRACT FROM AUTHOR]

Challenges associated with stretchable optoelectronic devices, such as pixel size, power consumption and stability, severely brock their realization in high-resolution digital imaging. Herein, we develop a universal detachable interface technique that allows uniform, damage-free and reproducible integration of micropatterned stretchable electrodes for pixel-dense intrinsically stretchable organic transistor arrays. Benefiting from the ideal heterocontact and short channel length (2 μm) in our transistors, switching current ratio exceeding 106, device density of 41,000 transistors/cm2, operational voltage down to 5 V and excellent stability are simultaneously achieved. The resultant stretchable transistor-based image sensors exhibit ultrasensitive X-ray detection and high-resolution imaging capability. A megapixel image is demonstrated, which is unprecedented for stretchable direct-conversion X-ray detectors. These results forge a bright future for the stretchable photonic integration toward next-generation visualization equipment. Pixel size, power consumption, and stability of stretchable optoelectronic devices limit their application in digital imaging. Bian et al. developed a universal detachable interface technique for damage-free micropattern, reproducible transfer and ideal heterocontact of intrinsically stretchable electrodes. [ABSTRACT FROM AUTHOR]

This article discusses the recent progress in the development of high-mobility polymer semiconductors with various functionalities. These semiconductors have advantages such as easy solution processing, large-area manufacturing, mechanical strength, and flexibility. The article focuses on the integration of high mobility with stretchability, strong luminescence, photolithography patterning, and efficient thermoelectric conversion. The challenges and future directions in this field are also discussed. The research is supported by various funding sources. [Extracted from the article]

Intrinsically stretchable light‐emitting polymer semiconductors are essential building blocks for bioelectronics and display textiles. Stretchability is challenging for rigid conjugated polymers unless sacrificing charge mobility by introducing amorphous domains. High‐performance light‐emitting properties designed with twisted angle are undesirable for conductive materials. Hence, the concurrent strategies hardly satisfy the balance of stretchability, light‐emitting and mobility. Herein, a morphology engineering is proposed by controlling micro‐crystalline and limiting aggregation, that four intrinsically stretchable emissive polymers with good charge mobility based on indacenodithiophene (IDT) are obtained. Polymers reveal good emission properties with high photoluminescence quantum yields (PLQY) of about 20%, while stretchable modulus and charge mobility are tunable by backbone and weight. Specifically emphasizing, IDT‐2T‐H retains high performance of charge mobility and PLQY even at 100% strain. Therefore, organic light emitting diodes are fabricated based on it and showing the luminance of 176.2 cd cm−2, which verifies the potential of technique to reconcile integration of stretchability, light‐emitting, and mobility. This is the first attempt to integrate balanced mechanical, optical, and electrical properties through micro‐crystalline aggregation‐limited morphology in one polymer, offering a feasible approach to advanced integrated circuit and multi‐functional electronics in the future. [ABSTRACT FROM AUTHOR]

Electrohydrodynamic (EHD) printing technique, which deposits micro/nanostructures through high electric force, has recently attracted significant research interest owing to their fascinating characteristics in high resolution (<1 μm), wide material applicability (ink viscosity 1–10 000 cps), tunable printing modes (electrospray, electrospinning, and EHD jet printing), and compatibility with flexible/wearable applications. Since the laboratory level of the EHD printed electronics' resolution and efficiency is gradually approaching the commercial application level, an urgent need for developing EHD technique from laboratory into industrialization have been put forward. Herein, we first discuss the EHD printing technique, including the ink design, droplet formation, and key technologies for promoting printing efficiency/accuracy. Then we summarize the recent progress of EHD printing in fabrication of displays, organic field‐effect transistors (OFETs), transparent electrodes, and sensors and actuators. Finally, a brief summary and the outlook for future research effort are presented. [ABSTRACT FROM AUTHOR]

Pathway production of products has more splendid trail and route optimization specifications and the desire to prevent barriers in near real‐time. This document presents a hybrid route planning approach for solving function optimization in cruise liners without a man. This research considers the problem of shipway making plans in depth and experiments it. Mathematical concepts for optimization algorithm decided to Complex Waters Based on Chaos Genetic Algorithm (CWCGA) is designed for ship trajectory tracking. Firstly, an enhanced particulate swarm algorithm is being used to design the pathways; an inter‐process is founded on balancing the inhabitants' significant search capability and the query capacity at a local level. Last, the original paddle plan and global status are simulated. The Optimization problem is utilized for the very next part to plan this same path of the marine ecosystem. The results reveal that the improved algorithm performs better than the route plan method based on the linear enhancement of the particular search space's body mass. [ABSTRACT FROM AUTHOR]