Search

Abstract Auscultation is the most effective method for diagnosing cardiovascular and respiratory diseases. However, stethoscopes typically capture mixed signals of heart and lung sounds, which can affect the auscultation effect of doctors. Therefore, the efficient separation of mixed heart and lung sound signals plays a crucial role in improving the diagnosis of cardiovascular and respiratory diseases. In this paper, we propose a blind source separation method for heart and lung sounds based on deep autoencoder (DAE), nonnegative matrix factorization (NMF) and variational mode decomposition (VMD). Firstly, DAE is employed to extract highly informative features from the heart and lung sound signals. Subsequently, NMF clustering is applied to group the heart and lung sounds based on their distinct periodicities, achieving the separation of the mixed heart and lung sounds. Finally, variational mode decomposition is used for denoising the separated signals. Experimental results demonstrate that the proposed method effectively separates heart and lung sound signals and exhibits significant advantages in terms of standardized evaluation metrics when compared to contrast methods.

Bamboo scrimber is a new type of biomass fiber-based composite material with broad application. In this study, self-developed bio-oil phenolic resin (BPF) was used to prepare bamboo scrimber. The effects of hot-pressing temperature, hot-pressing time, and BPF resin solid content on the modulus of rupture (MOR) and modulus of elasticity (MOE) were systematically investigated through single-factor experiments and response surface methodology (RSM). According to the Box-Behnken design (BBD) experiment of the RSM, the effects of all three factors on MOR and MOE are significant. The effects of the main factors affecting the MOR and MOE decreased in the order of resin solid content, hot-pressing temperature, and hot-pressing time. Based on BBD, the optimal conditions for the preparation of bamboo scrimber were determined as follows: a hot-pressing temperature of 150 °C, a hot-pressing time of 27.5 min, and a resin solid content of 29%. Under these conditions, the MOR is 150.05 MPa and the MOE is 12,802 MPa, which are close to the theoretical values, indicating that the optimization results are credible. This study helps to promote the full utilization of bamboo components and provides a reference for the development of high-quality bamboo scrimber.

An energy-efficient and environmentally conscious bamboo-constructed residential structure was created, comprising bamboo composite panels, steel framework, and mineral wool insulation. To ascertain the efficacy of this particular type of wall in enhancing thermal capabilities, the finite element method was employed to analyze the factors influencing the thermal performance of the exterior wall panels, insulation layer, framework, and interior wall panels. A more judicious design and implementation strategy, known as the 3# and 8# combination scheme, was evaluated in practical applications to assess the thermal efficiency of the wall system. The findings indicated that augmenting the thickness of the inner and outer wall panels and insulation layer, reducing the framework thickness, and incorporating wooden framework as a substitute for steel framework within a certain range enhanced the thermal capabilities of bamboo-constructed walls and mitigated the adverse effects of thermal bridges. The thermal performance of the residences employing the newly developed bamboo-constructed walls surpassed that of conventional iron container houses, thereby warranting broader adoption and application in practical projects. These outcomes offer valuable insights for the optimized design of thermal performance in bamboo-constructed walls. [ABSTRACT FROM AUTHOR]

Bamboo scrimber is a new type of biomass fiber-based composite material with broad application. In this study, self-developed bio-oil phenolic resin (BPF) was used to prepare bamboo scrimber. The effects of hot-pressing temperature, hot-pressing time, and BPF resin solid content on the modulus of rupture (MOR) and modulus of elasticity (MOE) were systematically investigated through single-factor experiments and response surface methodology (RSM). According to the Box-Behnken design (BBD) experiment of the RSM, the effects of all three factors on MOR and MOE are significant. The effects of the main factors affecting the MOR and MOE decreased in the order of resin solid content, hot-pressing temperature, and hot-pressing time. Based on BBD, the optimal conditions for the preparation of bamboo scrimber were determined as follows: a hot-pressing temperature of 150 °C, a hot-pressing time of 27.5 min, and a resin solid content of 29%. Under these conditions, the MOR is 150.05 MPa and the MOE is 12,802 MPa, which are close to the theoretical values, indicating that the optimization results are credible. This study helps to promote the full utilization of bamboo components and provides a reference for the development of high-quality bamboo scrimber. [ABSTRACT FROM AUTHOR]

As automatic speech recognition evolves, deployment of the voice user interface (VUI) has boomingly expanded. Especially since the COVID-19 pandemic, the VUI has gained more attention in online communication owing to its non-contact property. However, the VUI struggles to be applied in public scenes due to the degradation of received audio signals caused by various ambient noises. In this article, we propose Wavoice, the first noise-resistant multi-modal speech recognition system that fuses two distinct voices sensing modalities (i.e., millimeter-wave signals and audio signals from a microphone) together. One key contribution is to model the inherent correlation between millimeter-wave and audio signals. Based on it, Wavoice facilitates the real-time noise-resistant voice activity detection and user targeting from multiple speakers. Additionally, we elaborate on two novel modules for multi-modal fusion embedded into the neural network, leading to accurate speech recognition. Extensive experiments prove the effectiveness of Wavoice under adverse conditions—that is, the character recognition error rate below 1% in a range of 7 m. In terms of robustness and accuracy, Wavoice considerably outperforms existing audio-only speech recognition methods with lower character error and word error rates. [ABSTRACT FROM AUTHOR]

Auscultation is the most effective method for diagnosing cardiovascular and respiratory diseases. However, stethoscopes typically capture mixed signals of heart and lung sounds, which can affect the auscultation effect of doctors. Therefore, the efficient separation of mixed heart and lung sound signals plays a crucial role in improving the diagnosis of cardiovascular and respiratory diseases. In this paper, we propose a blind source separation method for heart and lung sounds based on deep autoencoder (DAE), nonnegative matrix factorization (NMF) and variational mode decomposition (VMD). Firstly, DAE is employed to extract highly informative features from the heart and lung sound signals. Subsequently, NMF clustering is applied to group the heart and lung sounds based on their distinct periodicities, achieving the separation of the mixed heart and lung sounds. Finally, variational mode decomposition is used for denoising the separated signals. Experimental results demonstrate that the proposed method effectively separates heart and lung sound signals and exhibits significant advantages in terms of standardized evaluation metrics when compared to contrast methods. [ABSTRACT FROM AUTHOR]

Defect engineering can give birth to novel properties for adsorption and photocatalysis in the control of antibiotics and heavy metal combined pollution with photocatalytic composites. However, the role of defects and the process mechanism are complicated and indefinable. Herein, TiO2/CN/3DG was fabricated and defects were introduced into the tripartite structure with separate O2 plasma treatment for the single component. We find that defect engineering can improve the photocatalytic activity, attributing to the increase of the contribution from h+ and OH. In contrast to TiO2/CN/3DG with a photocatalytic tetracycline removal rate of 75.2%, the removal rate of TC with D‐TiO2/CN/3DG has increased to 88.5%. Moreover, the reactive sites of tetracycline can be increased by adsorbing on the defective composites. The defect construction on TiO2 shows the advantages in tetracycline degradation and Cu2+ adsorption, but also suffers significant inhibition for the tetracycline degradation in a tetracycline/Cu2+ combined system. In contrast, the defect construction on graphene can achieve the cooperative removal of tetracycline and Cu2+. These findings can provide new insights into water treatment strategies with defect engineering. [ABSTRACT FROM AUTHOR]

Copyright of China Mining Magazine is the property of China Mining Magazine Co., Ltd. and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Bamboo is a fast-growing plant with properties such as low cost, abundant resources, and good carbon sequestration effect. However, the swift growth of bamboo resources generates an immense quantity of processing waste, which is necessary to effectively utilize bamboo processing waste. The leftovers from bamboo processing can be reutilized by fast pyrolysis to prepare renewable bio-oil. In this study, bamboo bio-oil was partially substituted for phenol to synthesize phenolic resin with different substitution rates under the action of an alkaline catalyst, and then to serve as the adhesive to produce bamboo scrimber. Bamboo bundles were impregnated with synthetic bio-oil phenolic resin to create bamboo scrimber, which was subsequently hot-pressed. The research shows that modified phenolic resins with a bio-oil substitution rate of under 30% have good physical and chemical properties, while the free aldehyde content of phenolic resin with 40% bio-oil substitution exceeds the limit value (0.3%) specified in the Chinese National Standard. The thermal stability of phenolic resins was also increased after bio-oil modification, indicated by the movement of the TG curve to higher temperature ranges. It was found that the bamboo scrimber prepared with 20% BPF resin adhesive had the best comprehensive properties of a good mechanical strength, hydrophobicity, and mildew resistance, particularly with an elastic modulus of 9269 MPa and a static bending strength of 143 MPa. The microscopic morphology showed that the BPF resin was well impregnated into the interior of the bamboo bundle and had a compact bonding structure within the bamboo scrimber. The anti-mold performance experiment found that the bio-oil-modified resin increased the anti-mold level of the bamboo scrimber from slightly corrosion-resistant to strong corrosion-resistant. The conclusions obtained from this study have a good reference value for achieving the comprehensive utilization of bamboo, helping to promote the use of all components, reduce the production cost of bamboo scrimber, and improve its mildew resistance performance. This provides new ideas for the development of low-cost mildew resistant bamboo scrimber novel materials. [ABSTRACT FROM AUTHOR]

Copyright of Coal Science & Technology (0253-2336) is the property of Coal Science & Technology and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)