Search

This article is a guest editorial for the IET Radar, Sonar & Navigation journal, focusing on selected papers from the RADAR 2022 conference held in Edinburgh, UK. The conference provided an opportunity for radar specialists from 22 countries to explore the latest developments in radar systems. Key topics discussed at the conference included new radar trends, target detection (with a focus on drones), low-frequency radar, and cognitive radar. The special issue contains 17 papers based on extended work presented at the conference, covering topics such as multistatic radar, passive radar, target signatures, and advanced radar processing techniques. The authors hope that this special issue will serve as a valuable resource for further research in the field. [Extracted from the article]

Schematic diagram depicting the synthesis process of the intelligent paper-based biosensor and its colorimetric detection application for biomarkers in urine. (FP: filter paper; CPBA: Carboxyphenylboric acid; HRP: horseradish peroxidase; TMB: 3,3′,5,5′-tetramethylbenzidine; GLU: glusose; UA: uric acid; SAR: sarcosine; GOx: glucose oxidase; UOx: urate oxidase; SOx: urate oxidase.) [Display omitted] • A green, low-cost, portable and visual intelligent paper-based biosensor was created. • This sensor immobilized HRP in horseradish by a borate-modified filter paper. • This sensor can detect many substances simultaneously and improve detection efficiency. • This sensor boasts the advantages of superior sensitivity, stability and selectivity. In the increasing demand for real-time testing, the imperative for a straightforward, rapid, portable, and effective biosensor is evident. In this study, an intelligent paper-based biosensor was developed, employing cost-effective and readily available filter paper as a matrix to prepare boronate affinity paper-based materials. The immobilization of horseradish peroxidase (HRP) from crude horseradish extract onto the material surface was realized. Ultimately, a cold assembly technique was employed to construct this intelligent paper-based biosensor, which combined with a smartphone APP, facilitated the easy, accurate, and simultaneous detection of the content of glucose (GLU), uric acid (UA), and sarcosine (SAR) in urine, significantly enhancing the convenience and practicality of real-time monitoring. Additionally, UV spectroscopy served as an auxiliary method to affirm the reliability of the detection outcomes. For the detection of GLU, UA, and SAR, the biosensor exhibited linear ranges of 2–200, 2–500, and 2–500 µmol L–1, respectively, with detection limits (LODs) of 1 µmol L–1 for all analytes. In practical urine sample analysis, the recovery rates of GLU, UA, and SAR detected by the intelligent paper-based biosensors were within a reasonable range, with relative standard deviations below 3.5 %. This fully demonstrates the high accuracy and reliability of the intelligent paper-based biosensor. The development of this low-cost, portable biosensor provides a new method for the detection of biomarkers related to H 2 O 2. [ABSTRACT FROM AUTHOR]

This paper uses MATLAB software to demonstrate the performance of UWBSAR and conducts a comparative study with data obtained from conventional radar. It compares various antennas that support UWB, such as Vivaldi, MIMO, and monopole antennas, analyzed using SIMULINK. The paper discusses the design of UWBSAR to provide a comprehensive analytical picture of the processed images. The focus is on frequency domain analysis in general and the Range Migration Algorithm (RMA) in particular. The data obtained after signal processing is recorded to estimate the crossrange resolution, which is then compared with conventional SAR. The cross-range resolution estimated using UWBSAR is found to be lower than that of conventional radar, proving that UWBSAR is a better alternative for obtaining sharper images in short-range applications. High-quality images are reconstructed using a combination of UWB radar, SAR processing, and proposed algorithms to improve image quality. The investigation includes positive image generation to enhance sharpness and near-field imaging procedures. This paper also describes Ultra-Wideband (UWB) Synthetic Aperture Radar (SAR) and its application in operating at low frequencies to detect obscured targets beneath foliage. While it has obvious military applications, it also has civilian uses, such as in geophysical studies and weather forecasting. Several applications have been identified for both military and civilian environments. [ABSTRACT FROM AUTHOR]

Background: The cloud-penetrating and fog-penetrating capability of Synthetic Aperture Radar (SAR) give it the potential for application in forest fire progress monitoring; however, the low extraction accuracy and significant salt-and-pepper noise in SAR remote sensing mapping of the burned area are problems. Aims: This paper provides a method for accurately extracting the burned area based on fully exploiting the changes in multiple different dimensional feature parameters of dual-polarised SAR images before and after a fire. Methods: This paper describes forest fire progress monitoring using dual-polarisation SAR images combined with multi-scale segmentation and unsupervised classification. We first constructed polarisation feature and texture feature datasets using multi-scene Sentinel-1 images. A multi-scale segmentation algorithm was then used to generate objects to suppress the salt-and-pepper noise, followed by an unsupervised classification method to extract the burned area. Key results: The accuracy of burned area extraction in this paper is 91.67%, an improvement of 33.70% compared to the pixel-based classification results. Conclusions: Compared with the pixel-based method, our method effectively suppresses the salt-and-pepper noise and improves the SAR burned area extraction accuracy. Implications: The fire monitoring method using SAR images provides a reference for extracting the burned area under continuous cloud or smoke cover. This paper describes a method to monitor forest fire progress using dual-polarisation Synthetic Aperture Radar (SAR) images combined with multi-scale segmentation and unsupervised classification. We aimed to take full advantage of the many different dimensions of feature parameter changes caused by forest fires, relying on time-series dual-polarised SAR imagery to achieve burned area extraction and forest fire progress monitoring. [ABSTRACT FROM AUTHOR]

Millimeter wave operates within a wavelength range of 1mm to 10mm and can penetrate through various non-metallic materials, such as the paperboard and plastic films commonly used in cigarette packaging boxes. In comparison to X-ray devices, millimeter wave imagers have the added advantage of not emitting ionizing radiation and having lower electromagnetic radiation output than the standard limit for mobile phone. Given these characteristics, we believe that utilizing millimeter wave imaging technology for detecting missing carton in packaged cigarette boxes could be a viable solution. The paper presents the fundamental imaging theory and showcases some images of cigarette boxes. The results demonstrate that our millimeter wave imager can produce clear images of packaged cigarette boxes with missing carton. We anticipate that this system has significant potential for application in machine vision for tobacco and other similar industries. [ABSTRACT FROM AUTHOR]

The growing adoption of electric propulsion systems in Maritime Autonomous Surface Ships (MASSs) necessitates advancements in shipboard electronics for safe, efficient, and reliable operation. These advancements are crucial for tasks such as real-time sensor data processing, control algorithms for autonomous navigation, and robust decision-making capabilities. This study investigates research trends in MASSs, using bibliographic analysis to identify policy and future research directions in this evolving field. We analyze 3363 MASS-related articles from the Web of Science database, employing co-occurrence word analysis and latent Dirichlet allocation (LDA) topic modeling. The findings reveal a rapidly growing field dominated by image recognition research. Keywords such as "datum", "image", and "detection" suggest a focus on collecting and analyzing marine data, particularly with deep learning for synthetic aperture radar imagery. LDA confirms this, with "image analysis and classification research" as the leading topic. The study also identifies national and organizational leaders in MASS research. However, research on Arctic routes lags behind that on other areas. This work provides valuable insights for policymakers and researchers, promoting a deeper understanding of MASSs and informing future policy and research agendas regarding the integration of electric propulsion systems within the maritime industry. [ABSTRACT FROM AUTHOR]

In order to reduce the hardware cost and data acquisition time in near-field scenarios, such as airport security imaging systems, this paper discusses the layout of a multiple-input multiple-output (MIMO) radar array. In view of the existing multi-input multiple-output imaging algorithm, the reconstructed image artifacts and aliasing problems caused by sparse sampling are discussed. In this paper, a multi-station radar array and a corresponding sparse MIMO imaging algorithm based on combined sparse sub-channels are proposed. By studying the wave–number spectrum of backscattered MIMO synthetic aperture radar (SAR) data, the nonlinear relationship between the wave number spectrum and reconstructed image is established. By selecting a complex gain vector, multiple channels are coherently combined effectively, thus eliminating aliasing and artifacts in the reconstructed image. At the same time, the algorithm can be used for the MIMO–SAR configuration of arbitrarily distributed transmitting and receiving arrays. A new multi-station millimeter wave imaging system is designed by using a frequency-modulated continuous wave (FMCW) chip and sliding rail platform as a planar SAR. The combination of the hardware system provides reconfiguration, convenience and economy for the combination of millimeter wave imaging systems in multiple scenes. [ABSTRACT FROM AUTHOR]

In recent years, with the miniaturization of high-precision position and orientation systems (POS), precise motion errors during SAR data collection can be calculated based on high-precision POS. However, compensating for these errors remains a significant challenge for multi-rotor UAV-borne SAR systems. Compared with large aircrafts, multi-rotor UAVs are lighter, slower, have more complex flight trajectories, and have larger squint angles, which result in significant differences in motion errors between building targets and ground targets. If the motion compensation is based on ground elevation, the motion error of the ground target will be fully compensated, but the building target will still have a large residual error; as a result, although the ground targets can be well-focused, the building targets may be severely defocused. Therefore, it is necessary to further compensate for the residual motion error of building targets based on the actual elevation on the SAR image. However, uncompensated errors will affect the time–frequency relationship; furthermore, the ω-k algorithm will further change these errors, resulting in errors in SAR images becoming even more complex and difficult to compensate for. To solve this problem, this paper proposes a novel improved precise topography and aperture-dependent (PTA) method that can precisely compensate for motion errors in the UAV-borne SAR system. After motion compensation and imaging processing based on ground elevation, a secondary focus is applied to defocused buildings. The improved PTA fully considers the coupling of the residual error with the time–frequency relationship and ω-k algorithm, and the precise errors in the two-dimensional frequency domain are determined through numerical calculations without any approximations. Simulation and actual data processing verify the effectiveness of the method, and the experimental results show that the proposed method in this paper is better than the traditional method. [ABSTRACT FROM AUTHOR]

Interferometric synthetic aperture radar (InSAR) and tomographic SAR measurement techniques are commonly used for the three-dimensional (3D) reconstruction of complex areas, while the effectiveness of these methods relies on the interferometric coherence among SAR images with minimal angular disparities. Radargrammetry exploits stereo image matching to determine the spatial coordinates of corresponding points in two SAR images and acquire their 3D properties. The performance of the image matching process directly impacts the quality of the resulting digital surface model (DSM). However, the presence of speckle noise, along with dissimilar geometric and radiometric distortions, poses considerable challenges in achieving accurate stereo SAR image matching. To address these aforementioned challenges, this paper proposes a radargrammetric method based on the composite registration of multi-aspect SAR images. The proposed method combines coarse registration using scale invariant feature transform (SIFT) with precise registration using normalized cross-correlation (NCC) to achieve accurate registration between multi-aspect SAR images with large disparities. Furthermore, the multi-aspect 3D point clouds are merged using the proposed radargrammetric 3D imaging method, resulting in the 3D imaging of target scenes based on multi-aspect SAR images. For validation purposes, this paper presents a comprehensive 3D reconstruction of the Five-hundred-meter Aperture Spherical radio Telescope (FAST) using Ka-band airborne SAR images. It does not necessitate prior knowledge of the target and is applicable to the detailed 3D imaging of large-scale areas with complex structures. In comparison to other SAR 3D imaging techniques, it reduces the requirements for orbit control and radar system parameters. To sum up, the proposed 3D imaging method with composite registration guarantees imaging efficiency, while enhancing the imaging accuracy of crucial areas with limited data. [ABSTRACT FROM AUTHOR]

For visible and Synthetic Aperture Radar (SAR) image fusion, this paper proposes a visible and SAR image fusion algorithm based on a Transformer and a Convolutional Neural Network (CNN). Firstly, in this paper, the Restormer Block is used to extract cross-modal shallow features. Then, we introduce an improved Transformer–CNN Feature Extractor (TCFE) with a two-branch residual structure. This includes a Transformer branch that introduces the Lite Transformer (LT) and DropKey for extracting global features and a CNN branch that introduces the Convolutional Block Attention Module (CBAM) for extracting local features. Finally, the fused image is output based on global features extracted by the Transformer branch and local features extracted by the CNN branch. The experiments show that the algorithm proposed in this paper can effectively achieve the extraction and fusion of global and local features of visible and SAR images, so that high-quality visible and SAR fusion images can be obtained. [ABSTRACT FROM AUTHOR]

This paper follows a detection-theoretic approach for using synthetic-aperture measurements, made at multiple moving passive receivers, in order to form an image showing the locations of stationary sources that are radiating unknown electromagnetic or acoustic waves. The paper starts with a physics-based model for the propagating fields, and, following the general approach of McWhorter et al (2023 arXiv:2302.06816, IEEE Open J. Signal Process. 4 437–51), derives a detection statistic that is used for the image formation. This detection statistic is a quadratic function of the data. Each point in the scene is tested as a possible hypothesized location for a source, and the detection statistic is plotted as a function of location. Because this image formation process is nonlinear, the standard linear methods for determining resolution cannot be applied. This paper shows how to analyze the detection image by first writing the noiseless image as a coherent sum of shifted complex ambiguity functions of the source waveform. The paper then develops a technique for calculating image resolution; resolution is found to depend on the sensor-source geometry and also on the properties (bandwidth and temporal duration) of the source waveform. Optimal filtering of the image is given, but a simple example suggests that optimal filtering may have little effect. Analysis is also given for the case in which multiple sources are present. [ABSTRACT FROM AUTHOR]

The MET Norway Ice Service (NIS) celebrated its fiftieth year as a formal operational sea ice information provider in 2020. Prior to the 1970's, support to navigation had started off with ad-hoc observations from coastal stations on Svalbard in the 1930's, before developing as a research programme in the 1960's. Activity in the region has steadily increased, and now the NIS also supports a large number of research, tourist, and resource exploration vessels, in addition to the ice chart archive being a resource for climate change research. The Ice Service has always been at the forefront in the use of satellite Earth Observation technologies, beginning with the routine use of optical thermal infrared imagery from NASA TIROS and becoming a large user of Canadian RADARSAT-2 Synthetic Aperture Radar (SAR), and then European Copernicus Sentinel-1, in the 2000's and 2010's. Initially ice charts were a weekly compilation of ice information using cloud-free satellite coverage, aerial reconnaissance, and in situ observations, drawn on paper at the offices of the Norwegian Meteorological Institute (MET Norway) in Oslo. From 1997 production moved to the Tromsø office using computer-based Geographical Information System (GIS) software and the NIS developed the ice charting system Bifrost. This allowed the frequency of production to be increased to every weekday, with a greater focus on detailed sea ice concentrations along the ice edge and coastal zones in Eastern Greenland and in the Svalbard fjords. From 2010, the NIS has also provided a weekly austral summer ice chart for the Weddell Sea and Antarctic Peninsula. To further develop its capabilities, NIS engages in a number of national and international research projects and led the EU Horizon 2020 project, Key Environmental monitoring for Polar Latitudes and European Readiness (KEPLER). This paper summarises the overall mandate and history of the NIS, and its current activities including the current state of routine production of operational ice charts at the NIS for maritime safety in both the Arctic and Antarctic, and future development plans. [ABSTRACT FROM AUTHOR]

Holographic synthetic aperture radar (HoloSAR) introduces a cutting-edge three-dimensional (3-D) imaging mode to the field of synthetic aperture radar (SAR), enriching the scattering information of targets by observing them across multiple spatial dimensions. However, independent phase errors among baselines, such as those caused by platform jitter and measurement inaccuracies, pose significant challenges to imaging quality. The phase gradient autofocus (PGA) method effectively estimates phase errors, but struggles to accurately estimate the linear component, causing vertical shift in HoloSAR subaperture imaging result. Therefore, this paper proposes a PGA-based phase error compensation method for HoloSAR to address the vertical shift issue caused by linear phase errors. This method can achieve phase error correction in both the echo domain and image domain with enhanced efficiency. Experimental results of simulated targets and real data from the GOTCHA system demonstrate the effectiveness and practicality of the proposed method. [ABSTRACT FROM AUTHOR]

Reservoir impoundment significantly impacts the hydrogeological conditions of reservoir bank slopes, and bank slope deformation or destruction occurs frequently under cyclic impoundment conditions. Ground deformation prediction is crucial to the early warning system for slow-moving landslides. Deep learning methods have developed rapidly in recent years, but only a few studies are on combining deep learning and landslide warning. This paper proposes a slow-moving landslide displacement prediction method based on the Informer deep learning model. Firstly, the Sentinel-1 (S1) data are processed to obtain the cumulative displacement time-series image of the bank slope by the Small-BAseline Subset Interferometric Synthetic Aperture Radar (SBAS-InSAR) method. Then, combining data on rainfall, humidity, and horizontal and vertical distances of pixel points from the water table line, this study created a dataset with landslide displacement as the target feature. After that, this paper improves the Informer model to make it applicable to our dataset. This study chose the Dawanzi landslide in the Baihetan reservoir area, China, for validation. After training with 50-time series deformation data points, the model can predict the displacement results of 12-time series deformation data points using 12-time series multi-feature data, and compared with the monitoring values, its Mean Square Error (MSE) was 11.614. The results show that the multivariate dataset is better than the deformation univariate data in predicting the displacement in the large deformation zone of bank slopes, and our model has better complexity and prediction performance than other deep learning models. The prediction results show that among zones I–IV, where the Dawanzi Tunnel is located, significant deformation with the maximum deformation rate detected exceeding –100mm/year occurs in Zones I and III. In these two zones, the initiation of deformation relates to the drop in water level after water storage, with the deformation rate of Zone III exhibiting a stronger correlation with the change in water level. It is expected that deformation in Zone III will either remain slow or stop, while deformation in Zone I will continue at the same or a decreased rate. Our proposed method for slow-moving landslide displacement forecasting offers fast, intuitive, and economically feasible advantages. It can provide a feasible research idea for future deep learning and landslide warning research. [ABSTRACT FROM AUTHOR]

Generative adversarial networks (or GANs) are a specific deep learning architecture often used for different usages, such as data generation or image-to-image translation. In recent years, this structure has gained increased popularity and has been used in different fields. One area of expertise currently in vogue is the use of GANs to produce synthetic aperture radar (SAR) data, and especially expand training datasets for SAR automatic target recognition (ATR). In effect, the complex SAR image formation makes these kind of data rich in information, leading to the use of deep networks in deep learning-based methods. Yet, deep networks also require sufficient data for training. However, contrary to optical images, we generally do not have a substantial number of available SAR images because of their acquisition and labelling cost; GANs are then an interesting tool. Concurrently, how to improve explainability for SAR ATR deep neural networks and how to make their reasoning more transparent have been increasingly explored as model opacity deteriorates trust of users. This paper aims at reviewing how GANs are used with SAR images, but also giving perspectives on how GANs could be used to improve interpretability and explainability of SAR classifiers. [ABSTRACT FROM AUTHOR]

Near-range radar imaging (NRRI) has evolved into a vital technology with diverse applications spanning fields such as remote sensing, surveillance, medical imaging and non-destructive testing. The Pseudopolar Format Matrix (PFM) has emerged as a promising technique for representing radar data in a compact and efficient manner. In this paper, we present a comprehensive PFM description of near-range radar imaging. Furthermore, this paper also explores the integration of the Fractional Fourier Transform (FrFT) with PFM for enhanced radar signal analysis. The FrFT—a powerful mathematical tool for signal processing—offers unique capabilities in analysing signals with time-frequency localization properties. By combining FrFT with PFM, we have achieved significant advancements in radar imaging, particularly in dealing with complex clutter environments and improving target detection accuracy. Meanwhile, this paper highlights the imaging matrix form of FrFT under the PFM, emphasizing the potential for addressing challenges encountered in near-range radar imaging. Finally, numerical simulation and real-world scenario measurement imaging results verify optimized accuracy and computational efficiency with the fusion of PFM and FrFT techniques, paving the way for further innovations in near-range radar imaging applications. [ABSTRACT FROM AUTHOR]

Distributed interrupted sampling repeater jamming (D-ISRJ) is the application of interrupted sampling repeater jamming technology within the framework of distributed jamming systems. It can generate coherent false targets after passing through the target radar's matched filter, but these false targets exhibit strong regularity in range and amplitude. Addressing this issue, a distributed interrupted sampling frequency-shifted repeater jamming method based on the group teaching optimization algorithm (GTOA) is proposed in this paper. By introducing frequency-shifted modulation during the retransmission of the jamming signal, the frequency shift amount of the jamming unit in each round of repeater jamming is used as an optimization variable to construct an optimization model for distributed interrupted sampling frequency-shifted repeater jamming. The parameters are then solved by using GTOA. Simulations are conducted to analyze the jamming effects under different distributed jamming modes, and the proposed optimization algorithm is compared to common swarm intelligence algorithms in the same optimization model. The method proposed in this paper can be used in the field of precision electronic warfare to improve the jamming effect of synthetic aperture radar. Experimental results show that under the given simulation conditions, the jamming signal generated by the proposed method can achieve better jamming effects. [ABSTRACT FROM AUTHOR]

High-resolution and high-squint spaceborne spotlight synthetic aperture radar (SAR) has significant potential for extensive application in remote sensing, but its swath width effectiveness is constrained by a critical factor: severe range cell migration (RCM). To address this, pulse repetition interval (PRI) variation offers a practical scheme for raw data reception. However, the current designs for continuously varying PRI (CV-PRI) exhibit high complexity in engineering. In response to the issue, this paper proposes a novel strategy of stepwise varying PRI (SV-PRI), which demonstrates higher reconstruction accuracy compared with CV-PRI. Furthermore, confronting the azimuth non-uniform sampling characteristics induced by the PRI variation, this paper introduces a complete uniform reconstruction processing based on the azimuth partitioning methodology, which effectively alleviates the inherent contradiction between resolution and swath width. The processing flow, utilizing the temporal point remapping (TPR) concept, ensures the uniformity and coherence of dataset partitioning and reassembly in the context of the interpolation on non-uniform grids. Finally, according to the simulation results, the point target data, processed through the processing flow proposed in this study, have demonstrated effective focusing results. [ABSTRACT FROM AUTHOR]

This document explores the significance of remote sensing in monitoring maritime activities and identifying vessels. It emphasizes the need for surveillance to ensure safety, security, and emergency management, given the increasing number of vessels worldwide. The document highlights the use of technologies like the Automatic Identification System (AIS) and remote sensing in situations where collaborative systems are not reliable. It also discusses the integration of data from different sensors and the application of data science techniques for a comprehensive assessment of maritime traffic. The document concludes by summarizing research papers on ship detection, tracking, and classification using various sensors and data processing techniques. [Extracted from the article]

Synthetic Aperture Radar (SAR) can image the ground with a wide area and high resolution at all times and in all weather and has become an important means of remote sensing. Differential interferometry SAR technology can obtain high-precision surface deformation information by processing more than two SAR images before and after deformation. In recent years, it has attracted widespread attention and research. However, due to the increasing number of ground electronic devices, ground radio frequency interference (RFI) has become one of the main problems in differential interferometry SAR processing, seriously affecting the performance of differential interferometry SAR imaging and differential interferometry surface deformation monitoring applications. In this paper, a clutter cancellation interference enhancement detection algorithm is proposed. By clutter suppression in the primary and secondary images, the interference-to-signal ratio is increased, which effectively improves the interference detection capabilities. The effectiveness of the algorithm in this paper is verified by the on-orbit measured data of the Lutan-1 satellites. [ABSTRACT FROM AUTHOR]

Complex geometric distortions and nonlinear radiation differences between optical and synthetic aperture radar (SAR) images present challenges for the matching of sufficient and evenly distributed corresponding points. To address this problem, this paper proposes a deep convolutional network based on an attention mechanism for matching optical and SAR images. In order to obtain robust feature points, we employ phase consistency instead of image intensity and gradient information for feature detection. A deep convolutional network (DCN) is designed to extract high-level semantic features between optical and SAR images, providing robustness to geometric distortion and nonlinear radiation changes. Notably, incorporating multiple inverted residual structures in the DCN facilitates efficient extraction of local and global features, promoting feature reuse, and reducing the loss of key features. Furthermore, a dense feature fusion module based on coordinate attention is designed, focusing on the spatial positional information of effective features, integrating key features into deep descriptors to enhance the robustness of deep descriptors to nonlinear radiometric differences. A coarse-to-fine strategy is then employed to enhance accuracy by eliminating mismatches. Experimental results demonstrate that the proposed network performs better than the manually designed descriptors-based methods and the stateof- the-art deep learning networks in both matching effectiveness and accuracy. Specifically, the number of matches achieved is approximately 2 times greater than that of other methods, with a 10% improvement in F-measure. [ABSTRACT FROM AUTHOR]

Rapid mapping demands efficient methods for a fast extraction of information from satellite data while minimizing data requirements. This paper explores the potential of deep learning for the generation of high-resolution urban elevation data from Synthetic Aperture Radar (SAR) imagery. In order to mitigate occlusion effects caused by the side-looking nature of SAR remote sensing, two SAR images from opposing aspects are leveraged and processed in an end-to-end deep neural network. The presented approach is the first of its kind to implicitly handle the transition from the SAR-specific slant range geometry to a ground-based mapping geometry within the model architecture. Comparative experiments demonstrate the superiority of the dual-aspect fusion over single-image methods in terms of reconstruction quality and geolocation accuracy. Notably, the model exhibits robust performance across diverse acquisition modes and geometries, showcasing its generalizability and suitability for height mapping applications. The study's findings underscore the potential of deep learning-driven SAR techniques in generating high-quality urban surface models efficiently and economically. [ABSTRACT FROM AUTHOR]

Introduction: Optical and SAR image matching is one of the fields within multisensor imaging and fusion. It is crucial for various applications such as disaster response, environmental monitoring, and urban planning, as it enables comprehensive and accurate analysis by combining the visual information of optical images with the penetrating capability of SAR images. However, the differences in imaging mechanisms between optical and SAR images result in significant nonlinear radiation distortion. Especially for SAR images, which are affected by speckle noises, resulting in low resolution and blurry edge structures, making optical and SAR image matching difficult and challenging. The key to successful matching lies in reducing modal differences and extracting similarity information from the images. Method: In light of this, we propose a structure similarity virtual map generation network (SVGNet) to address the task of optical and SAR image matching. The core innovation of this paper is that we take inspiration from the concept of image generation, to handle the predicament of image matching between different modalities. Firstly, we introduce the Attention U-Net as a generator to decouple and characterize optical images. And then, SAR images are consistently converted into optical images with similar textures and structures. At the same time, using the structural similarity (SSIM) to constrain structural spatial information to improve the quality of generated images. Secondly, a conditional generative adversarial network is employed to further guide the image generation process. By combining synthesized SAR images and their corresponding optical images in a dual channel, we can enhance prior information. This combined data is then fed into the discriminator to determine whether the images are true or false, guiding the generator to optimize feature learning. Finally, we employ least squares loss (LSGAN) to stabilize the training of the generative adversarial network. Results and Discussion: Experiments have demonstrated that the SVGNet proposed in this paper is capable of effectively reducing modal differences, and it increases the matching success rate. Compared to direct image matching, using image generation ideas results in a matching accuracy improvement of more than twice. [ABSTRACT FROM AUTHOR]

When Synthetic Aperture Radar (SAR) observes complex structural targets such as oil tanks, it is easily interfered with by multipath signals, resulting in a large number of multipath ghost images in the SAR image, which seriously affect the image clarity. To address this problem, this paper proposes a multi-aspect multipath suppression method. This method observes complex structural targets from different azimuth angles to obtain a multi-aspect image sequence and then uses the difference in sequence features between the target image and the multipath ghost image with respect to aspect angle to separate them. This paper takes a floating-roof oil tank as an example to analyze the propagation path and the ghost image characteristics of multipath signals under different observation aspects. We conclude that the scattering center of the multipath ghost image changes with the radar observation aspect, whereas the scattering center of the target image does not. This paper uses the Robust Principal Component Analysis (RPCA) method to decompose the image sequence matrix into two parts: a sparse matrix and a low-rank matrix. The low-rank matrix represents the aspect-stable principal component in the image sequence; that is, the real scattering center. The sparse matrix represents the part of the image sequence that deviates from the principal component; that is, the signal that varies with aspect, mainly including multipath signals, sidelobes, anisotropic signals, etc. By reconstructing the low-rank matrix and the sparse matrix, respectively, we can obtain the image after multipath signal suppression and also the multipath ghost image. Both the target and the multipath signal provide useful information. The image after multipath signal suppression is useful for obtaining the structural information of the target, and the multipath ghost image is useful for analyzing the multipath phenomenon of the complex structure target. This paper conducts experimental verification using real airborne SAR data of an external floating roof oil tank and compares three methods: RPCA, PCA, and sub-aperture fusion method. The experiment shows that the RPCA method can better separate the target image and the multipath ghost image. [ABSTRACT FROM AUTHOR]

Circular synthetic aperture radar (CSAR) possesses the capability of multi-angle observation, breaking through the geometric observation constraints of traditional strip SAR and holding the potential for three-dimensional imaging. Its sub-wavelength level of planar resolution, resulting from a long synthetic aperture, makes CSAR highly valuable in the field of high-precision mapping. However, the motion geometry of CSAR is more intricate compared to traditional strip SAR, demanding high precision from navigation systems. The accumulation of errors over the long synthetic aperture time cannot be overlooked. CSAR exhibits significant coupling between the range and azimuth directions, making traditional motion compensation methods based on linear SAR unsuitable for direct application in CSAR. The dynamic nature of flight, with its continuous changes in attitude, introduces a significant deformation error between the non-rigidly connected Inertial Measurement Unit (IMU) and the Global Positioning System (GPS). This deformation error makes it difficult to accurately obtain radar position information, resulting in imaging defocus. The research in this article uncovers a correlation between the deformation error and radial acceleration. Leveraging this insight, we propose utilizing radial acceleration to estimate residual motion errors. This paper delves into the analysis of Position and Orientation System (POS) errors, presenting a novel high-resolution CSAR motion compensation method based on airborne platform acceleration information. Once the system deformation parameters are calibrated using point targets, the deformation error can be directly calculated and compensated based on the acceleration information, ultimately resulting in the generation of a high-resolution image. In this paper, the effectiveness of the method is verified with airborne flight test data. This method can compensate for the deformation error and effectively improve the peak sidelobe ratio and integral sidelobe ratio of the target, thus improving image quality. The introduction of acceleration information provides new means and methods for high-resolution CSAR imaging. [ABSTRACT FROM AUTHOR]

This paper investigates a real-time process generator of wideband signals, which calculates waveforms in a field-programmable gate array (FPGA) using the high-level synthesis (HLS) method. To obtain high-resolution and wide-swath images, the generator must produce multiple modes of large time-bandwidth product (TBP) linear frequency modulation (LFM) signals. However, the conventional storage method is unrealistic as it requires huge storage resources to save pre-computed waveforms. Therefore, this paper proposes a novel processing approach that calculates waveforms in real-time based simply on parameters such as the sampling frequency, bandwidth, and time width. Additionally, this paper implements predistortion through the polynomial curve to approximate phase errors of the system. The parallelizing process in the FPGA is necessary to satisfy the high-speed requirement of a digital-to-analog converter (DAC); however, repeatedly multiplexing real-time calculation consumes extensive logic and DSP resources, potentially exceeding FPGA limitations. To address this, this paper proposes a piecewise linear algorithm to conserve resources, which processes the polynomial only once, acquires the difference in two adjacent values through the register and pipeline, and then adds this increment to facilitate parallel computations. The performance of this proposed generator is validated through simulation and implemented in experiments with an X-band airborne SAR system. [ABSTRACT FROM AUTHOR]

This paper, intends to survey major ship detection models and techniques based on conventional methods of modelling statistical data and also models based on deep Convolutional Neural Networks (CNNs) using satellite-borne Synthetic Aperture Radar (SAR) data. We aim to extract current research directions and limitations of existing models to gain insight understanding and suggestions from vast amount of research in ship detection using SAR. The literature review addresses key methods demonstrated by researchers for ship detections in SAR. Despite of rigorous research in this domain the application of organized knowledge is still being explored to demonstrate ship detection in SAR imagery field. Research papers and articles were gathered from standard publishers from last decade. The proceedings from significant publications in conference and transactions were included in this review. [ABSTRACT FROM AUTHOR]

Forest biomass estimation is undoubtedly one of the most pressing research subjects at present. Combining multi-source remote sensing information can give full play to the advantages of different remote sensing technologies, providing more comprehensive and rich information for aboveground biomass (AGB) estimation research. Based on Landsat 8, Sentinel-2A, and ALOS2 PALSAR data, this paper takes the artificial coniferous forests in the Saihanba Forest of Hebei Province as the object of study, fully explores and establishes remote sensing factors and information related to forest structure, gives full play to the advantages of spectral signals in detecting the horizontal structure and multi-dimensional synthetic aperture radar (SAR) data in detecting the vertical structure, and combines environmental factors to carry out multivariate synergistic methods of estimating the AGB. This paper uses three variable selection methods (Pearson correlation coefficient, random forest significance, and the least absolute shrinkage and selection operator (LASSO)) to establish the variable sets, combining them with three typical non-parametric models to estimate AGB, namely, random forest (RF), support vector regression (SVR), and artificial neural network (ANN), to analyze the effect of forest structure on biomass estimation, explore the suitable AGB of artificial coniferous forests estimation of machine learning models, and develop the method of quantifying saturation value of the combined variables. The results show that the horizontal structure is more capable of explaining the AGB compared to the vertical structure information, and that combining the multi-structure information can improve the model results and the saturation value to a great extent. In this study, different sets of variables can produce relatively superior results in different models. The variable set selected using LASSO gives the best results in the SVR model, with an R 2 values of 0.9998 and 0.8792 for the training and the test set, respectively, and the highest saturation value obtained is 185.73 t/ha, which is beyond the range of the measured data. The problem of saturation in biomass estimation in boreal medium- and high-density forests was overcome to a certain extent, and the AGB of the Saihanba area was better estimated. [ABSTRACT FROM AUTHOR]

In recent years, deep learning has found widespread application in SAR image object detection. However, when detecting multi-scale targets against complex backgrounds, these models often struggle to strike a balance between accuracy and speed. Furthermore, there is a continuous need to enhance the performance of current models. Hence, this paper proposes LRMSNet, a new multi-scale target detection model designed specifically for SAR images in complex backgrounds. Firstly, the paper introduces an attention module designed to enhance contextual information aggregation and capture global features, which is integrated into a backbone network with an expanded receptive field for improving SAR image feature extraction. Secondly, this paper develops an information aggregation module to effectively fuse different feature layers of the backbone network. Lastly, to better integrate feature information at various levels, this paper designs a multi-scale aggregation network. We validate the effectiveness of our method on three different SAR object detection datasets (MSAR-1.0, SSDD, and HRSID). Experimental results demonstrate that LRMSNet achieves outstanding performance with a mean average accuracy (mAP) of 95.2%, 98.9%, and 93.3% on the MSAR-1.0, SSDD, and HRSID datasets, respectively, with only 3.46 M parameters and 12.6 G floating-point operation cost (FLOPs). When compared with existing SAR object detection models on the MSAR-1.0 dataset, LRMSNet achieves state-of-the-art (SOTA) performance, showcasing its superiority in addressing SAR detection challenges in large-scale complex environments and across various object scales. [ABSTRACT FROM AUTHOR]

Time series dynamic prediction of surface deformation in mining areas can provide reference data for coal mine safety and production, which has important impacts. The combination of interferometric synthetic aperture radar (InSAR) technology and the probability integral method (PIM) is commonly used for predicting deformation. However, most surface subsidence prediction in mining areas is based on the static PIM parameters, failing to achieve the three-dimensional (3D) dynamic deformation prediction. This paper proposed a 3D deformation dynamic prediction model (InSAR-3D-CTPIM) between InSAR deformation observations and dynamic coordinate-time PIM (CTPIM) parameters, which can realize the prediction of east–west, north–south, and vertical series deformation caused by mining. The method has been validated by simulation experiments and real experiments in the mining area of Jiansheng Coal Mine in Baisha Reservoir, Henan Province, China. The results showed that the modeling accuracy was improved by 34.3% compared to the traditional multi-rate model, and the accuracy was improved by 28.5% compared to the vertical deformation obtained by the traditional static PIM method. The InSAR-3D-CTPIM model can be used to predict the evolutionary history of basin-wide surface deformation dynamics in coal mining areas, and provide a reference for the early warning and prediction of geological hazards in coal mining areas. [ABSTRACT FROM AUTHOR]

The PIESAT-01 constellation is the world's first multi-baseline distributed synthetic aperture radar (SAR) constellation with a "Cartwheel" formation. The "Cartwheel" formation is a unique formation in which four satellites fly in companion orbits, ensuring that at any given moment, the main satellite remains at the center, with three auxiliary satellites orbiting around it. Due to this unique configuration of the PIESAT-01 constellation, four images of the same region and six pairs of baselines can be obtained with each shot. So far, there has been no imaging and interference research based on four-satellite constellation measured data, and there is an urgent need to explore algorithms for the "Cartwheel" configuration imaging and digital surface model (DSM) production. This paper introduces an improved bistatic SAR imaging algorithm under the four-satellites interferometric mode, which solves the problem of multi-orbit nonparallelism in imaging while ensuring imaging coherence and focusing ability. Subsequently, it presents an interferometric processing method for the six pairs of baselines, weighted fusion based on elevation ambiguity from different baselines, to obtain a high-precision DSM. Finally, this paper selects the Dingxi region of China and other regions with diverse terrains for imaging and DSM production and compares the DSM results with ICESat-2 global geolocated photon data and TanDEM DSM data. The results indicate that the accuracy of PIESAT-01 DSM meets the standards of China's 1:50,000 scale and HRTI-3, demonstrating a high level of precision. Moreover, PIESAT-01 data alleviate the reliance on simulated data for research on multi-baseline imaging and multi-baseline phase unwrapping algorithms and can provide more effective and realistic measured data. [ABSTRACT FROM AUTHOR]

For synthetic aperture microwave radiometers, the problem of Radio Frequency Interference (RFI) is becoming more and more serious, which affects both the scientific retrieval of remote sensing data and the imaging quality of brightness temperature (BT) images. In the visibility data domain, the array factor synthesis algorithm is commonly employed to mitigate RFI sources and their Gibbs trailing. In the BT image domain, the CLEAN algorithm is typical applied to mitigate RFI sources and their Gibbs trailing. However, the array factor synthesis algorithm can result in anomalous BT points near the "zero trap" region, and the CLEAN algorithm will miss some BT points below a certain threshold. In this paper, a Bi-domain combined mitigation algorithm is proposed to mitigate RFI sources and their Gibbs trailing. Following initial mitigation in the visibility data domain, dual thresholds are applied to normalize anomalous BT points near the "zero trap" region, thereby enhancing imaging quality. The effectiveness of the Bi-domain combined mitigation algorithm is verified by using both measured data from SMOS L1A and simulated data. The experimental results demonstrate that the Bi-domain combined mitigation algorithm is superior to the array factor synthesis algorithm and the CLEAN algorithm in mitigating RFI sources and their Gibbs trailing. [ABSTRACT FROM AUTHOR]

Phase unwrapping of high phase noise and steep phase gradient has always been a challenging problem in interferometric synthetic aperture radar (InSAR), in which case the least squares (LS) phase unwrapping method often suffers from significant unwrapping errors. Therefore, this paper proposes an improved LS phase unwrapping method based on the Chebyshev filter, which solves the problem of incomplete unwrapping and errors under high phase noise and steep phase gradient. Firstly, the steep gradient phase is transformed into multiple flat gradient phases using the Chebyshev filter. Then the flat gradient phases are unwrapped using the LS unwrapping method. Finally, the final unwrapped phase is obtained by iteratively adding the unwrapping results of the flat gradient phases. The simulation results show that the proposed method has the best accuracy and stability compared to LS, PCUA, and RPUA. In the real InSAR phase unwrapping experiment, the RMSE of the proposed method is reduced by 63.91%, 35.38%, and 54.39% compared to LS, PCUA, and RPUA. The phase unwrapping time is reduced by 62.86% and 11.64% compared to PCUA and RPUA. [ABSTRACT FROM AUTHOR]

Environmental applications play a significant role in the ongoing research area of Polarimetric Synthetic Aperture Radar (PolSAR) image classification. In this paper, a new model is proposed for classifying PolSAR images and applied to a part of the Greater Cairo area in the Nile basin, South of Delta, Egypt. First, the proposed model performs data pre-processing by extracting the coherency and covariance elements noted as [T] and [C] matrices, respectively. Second, temporal convolutional networks (TCN) deep learning is used to extract the features from coherency and covariance elements and then train the model. Third, the SoftMax classifier is used to classify the PolSAR image. Finally, the proposed model is tested with evaluation metrics. The obtained results show that the proposed model can achieve high classification performances. [ABSTRACT FROM AUTHOR]

This paper is intended to summarize the research conducted during the first 2 years of the Dragon 5 project 59,332 (geophysical and atmospheric retrieval from Synthetic Aperture Radar (SAR) data stacks over natural scenarios). Monitoring atmospheric phenomena, encompassing both tropospheric and ionospheric conditions, holds pivotal significance for various scientific and practical applications. In this paper, we present an exploration of advanced techniques for estimating tropospheric and ionospheric phase screens using stacks of Synthetic Aperture Radar (SAR) images. Our study delves into the current state-of-the-art in atmospheric monitoring with a focus on spaceborne SAR systems, shedding light on their evolving capabilities. For tropospheric phase screen estimation, we propose a novel approach that jointly estimates the tropospheric component from all the images. We discuss the methodology in detail, highlighting its ability to recover accurate tropospheric maps. Through a series of quantitative case studies using real Sentinel-1 satellite data, we demonstrate the effectiveness of our technique in capturing tropospheric variability over different geographical regions. Concurrently, we delve into the estimation of ionospheric phase screens utilizing SAR image stacks. The intricacies of ionospheric disturbances pose unique challenges, necessitating specialized techniques. We dissect our approach, showcasing its capacity to mitigate ionospheric noise and recover precise phase information. Real data from the Sentinel-1 satellite are employed to showcase the efficacy of our method, unraveling ionospheric perturbations with improved accuracy. The integration of our techniques, though presented separately for clarity, collectively contributes to a comprehensive framework for atmospheric monitoring. Our findings emphasize the potential of SAR-based approaches in advancing our knowledge of atmospheric processes, thus fostering advancements in weather prediction, geophysics, and environmental management. [ABSTRACT FROM AUTHOR]

In this paper, the Multi-Temporal Interferometric Synthetic Aperture Radar (MT-InSAR) technology is adopted to monitor the Line of Sight (LOS) displacement of Fushun West Opencast Coal Mine (FWOCM) and its surrounding areas in northeast China using Sentinel-1 Synthetic Aperture Radar (SAR) images acquired from 2018 to 2022. The spatial-temporal evolution of urban subsidence and the south-slope landslide are both analyzed in detail. Comparison with ground measurements and cross-correlation analysis via cross wavelet transform with monthly precipitation data are also conducted, to analyze the influence factors of displacements in FWOCM. The monitoring results show that a subsidence basin appeared in the urban area near the eastern part of the north slope in 2018, with settlement center located at the intersection of E3000 and fault F1. The Qian Tai Shan (QTS) landslide on the south slope, which experienced rapid sliding during 2014 to 2016, presents seasonal deceleration and acceleration with precipitation, with the maximum displacement in vicinity of the Liushan paleochannel. The results of this paper have fully taken in account for the complications of large topographic relief, geological conditions, spatial distribution and temporal evolution characteristics of surface displacements in opencast mining area. The wide range and long time series dynamic monitoring of opencast mine are of great significance to ensure mine safety production and geological disaster prevention in the investigated mining area. [ABSTRACT FROM AUTHOR]

With the number of new satellites increasing dramatically, comprehensive space surveillance is becoming increasingly important. Therefore, high-resolution inverse synthetic aperture radar (ISAR) imaging of satellites can provide an in-situ assessment of the satellites. This paper demonstrates that pseudo-noise signals can also be used for satellite imaging, in addition to classical linear frequency-modulated chirp signals. Pseudo-noise transmission signals offer the advantage of very low cross-correlation values. This, for instance, enables the possibility of a system with multiple channels transmitting instantaneously. Furthermore, it can significantly reduce signal interference with other systems operating in the same frequency spectrum, which is of particular interest for high-bandwidth, high-power systems such as satellite imaging radars. A new routine has been introduced to generate a wideband pseudo-noise signal with a peak-to-average power ratio (PAPR) similar to that of a chirp signal. This is essential for applications where the transmit signal power budget is sharply limited by the high-power amplifier. The paper presents both theoretical descriptions and analysis of the generated pseudo-noise signal as well as the results of an imaging measurement of a real space target using the introduced pseudo-noise signals. [ABSTRACT FROM AUTHOR]

Synthetic aperture radar tomography (TomoSAR) is an extension of synthetic aperture radar (SAR) imaging. It introduces the synthetic aperture principle into the elevation direction to achieve three-dimensional (3-D) reconstruction of the observed target. Compressive sensing (CS) is a favorable technology for sparse elevation recovery. However, for the non-sparse elevation distribution of the forested areas, if CS is selected to reconstruct it, it is necessary to utilize some orthogonal bases to first represent the elevation reflectivity sparsely. The iterative adaptive approach (IAA) is a non-parametric algorithm that enables super-resolution reconstruction with minimal snapshots, eliminates the need for hyperparameter optimization, and requires fewer iterations. This paper introduces IAA to tomographicinversion of the forested areas and proposes a novel multi-polarimetric-channel joint 3-D imaging method. The proposed method relies on the characteristics of the consistent support of the elevation distribution of different polarimetric channels and uses the L 2 -norm to constrain the IAA-based 3-D reconstruction of each polarimetric channel. Compared with typical spectral estimation (SE)-based algorithms, the proposed method suppresses the elevation sidelobes and ambiguity and, hence, improves the quality of the recovered 3-D image. Compared with the wavelet-based CS algorithm, it reduces computational cost and avoids the influence of orthogonal basis selection. In addition, in comparison to the IAA, it demonstrates greater accuracy in identifying the support of the elevation distribution in forested areas. Experimental results based on BioSAR 2008 data are used to validate the proposed method. [ABSTRACT FROM AUTHOR]

In order to improve the classification performance of Polarimetric Synthetic Aperture Radar (PolSAR) image by synthesizing various polarimetric features, a supervised manifold learning method is proposed in this paper for PolSAR feature extraction and classification. Under the umbrella of tensor algebra, the proposed method characterizes each pixel with a feature tensor by combining the high-dimensional feature information of all the pixels within its local neighborhood. The tensor representation mode integrates the polarimetric information and spatial information, which is beneficial for alleviating the influence of speckle noise. Then, the tensor discriminative locality alignment (TDLA) method is introduced to seek the multilinear transformation from the original polarimetricspatial feature tensor to the low-dimensional feature. The label information of training samples is utilized during feature transformation and feature mapping; therefore, the discriminability of different classes can be well preserved. Based on the extracted features in the low-dimensional space, the SVM classifier is applied to achieve the final classification result. The experiments implemented on two real PolSAR data sets verify that the proposed method can extract the features with better stability and separability, and obtain superior classification results compared to several state-of-the-art methods. [ABSTRACT FROM AUTHOR]

Dedicated to synchronously acquiring large-area, high-precision, and multi-scale ocean wind and wave information, a novel concept of a spaceborne ocean microwave dual-function integrated sensor is proposed in this paper. It integrates the functions of a scatterometer and SAR by sharing a single phased-array antenna. An overview of the scientific requirements and motivations for the sensor are outlined firstly. In order to fulfill the observation requirements of both the functions, the constraints on the system parameters such as frequency, antenna size, and incidence angle are analyzed. Then, the selection principles of these parameters are discussed within the limitations of antenna area, bandwidth, available time, and cost. Additionally, the constraints on the time sequence of transmitting and receiving pulses are derived to ensure that there is no conflict when the two functions operate simultaneously. Subsequently, a method for jointly designing the pulse repetition frequency (PRF) of both the functions is introduced, along with zebra maps to verify its effectiveness. At the end of the paper, the system and performance parameters of the sensor are given for further insight into it. [ABSTRACT FROM AUTHOR]

Many fields of human activity benefit from the ability to create images of obscured objects placed behind walls and to map their displacement in a noninvasive way. Usually, imaging devices like Synthetic Aperture Radars (SARs) and Ground-Penetrating Radars (GPRs) use expensive dedicated electronics which results in prohibitive prices. This paper presents the experimental implementation and the results obtained from an imaging system capable of performing SAR imaging and interferometric displacement mapping of targets located behind walls, as well as 3D GPR imaging using a low-cost general-purpose radar sensor. The proposed solution uses for the RF section of the system a K-band microwave radar sensor module implementing Frequency-Modulated Continuous Wave (FMCW) operation. The low-cost sensor was originally intended for simple presence detection and ranging for domestic applications. The proposed system was tested in several scenarios and proved to operate as intended for a fraction of the cost of a commercial imaging device. In one scenario, it was able to detect and locate a 15 cm-diameter fire-extinguisher located at a distance of 3.5 m from the scanning system and 1.6 m behind a 3 cm-thick MDF (medium-density fiberboard) wall with cm-level accuracy. In a second test, the proposed system was used to perform interferometric displacement measurements, and it was capable of determining the displacement of a metal case with sub-millimeter accuracy. In a third experiment, the system was used to construct a 3D image of the inside of a wood table with cm-level resolution. [ABSTRACT FROM AUTHOR]

Arid zone grassland is a crucial component of terrestrial ecosystems and plays a significant role in ecosystem protection and soil erosion prevention. However, accurately mapping grassland spatial information in arid zones presents a great challenge. The accuracy of remote sensing grassland mapping in arid zones is affected by spectral variability caused by the highly diverse landscapes. In this study, we explored the potential of a rectangular tile classification model, constructed using the random forest algorithm and integrated images from Sentinel-1A (synthetic aperture radar imagery) and Sentinel-2 (optical imagery), to enhance the accuracy of grassland mapping in the semiarid to arid regions of Ordos, China. Monthly Sentinel-1A median value images were synthesised, and four MODIS vegetation index mean value curves (NDVI, MSAVI, NDWI and NDBI) were used to determine the optimal synthesis time window for Sentinel-2 images. Seven experimental groups, including 14 experimental schemes based on the rectangular tile classification model and the traditional global classification model, were designed. By applying the rectangular tile classification model and Sentinel-integrated images, we successfully identified and extracted grasslands. The results showed the integration of vegetation index features and texture features improved the accuracy of grassland mapping. The overall accuracy of the Sentinel-integrated images from EXP7-2 was 88.23%, which was higher than the accuracy of the single sensor Sentinel-1A (53.52%) in EXP2-2 and Sentinel-2 (86.53%) in EXP5-2. In all seven experimental groups, the rectangular tile classification model was found to improve overall accuracy (OA) by 1.20% to 13.99% compared to the traditional global classification model. This paper presents novel perspectives and guidance for improving the accuracy of remote sensing mapping for land cover classification in arid zones with highly diverse landscapes. The study presents a flexible and scalable model within the Google Earth Engine framework, which can be readily customized and implemented in various geographical locations and time periods. [ABSTRACT FROM AUTHOR]

Due to the excellent characteristics of Synthetic Aperture Radar (SAR), it has become an important technical means for land and sea target detection applications worldwide. However, the SAR image imaging process is often accompanied by speckle noise, which affects the accuracy of target detection. For this problem, this paper proposes an SAR image reconstruction model based on image denoising and feature extraction. Given a noisy SAR image, at each pixel of the image, the value of the singularity index of a metric defined by the signal gradient norm density is calculated. Then through a hierarchical decomposition of these singular indices, a set of pixels containing the most informative feature set of the image is extracted, and a denoised image is reconstructed using the extracted features. In comparison to traditional filtering and denoising techniques such as non-local filtering, this algorithm achieves remarkable local filtering and denoising effects while preserving the image's texture information. The denoising performance of the proposed method is evaluated through a series of quantitative indicators and visual comparisons. The results demonstrate that this method effectively reduces background clutter, resulting in a higher contrast between the target and the background. [ABSTRACT FROM AUTHOR]

Fast factorized back-projection (FFBP) is a classical fast time-domain technique that has garnered significant success in spotlight synthetic aperture radar (SAR) signal processing. The algorithm's efficiency has been extended to stripmap SAR through integral aperture determination and full-aperture data block processing while retaining its computational efficiency. However, the above method is only operated in the azimuth direction, and the computing efficiency needs to be urgently improved in the actual processing process. This paper proposes a fast factorized back-projection algorithm for stripmap SAR imaging based on range block division. The echo data are divided into multiple subblocks in the range direction, and FFBP processing is applied separately to each full-aperture subblock, further enhancing computational efficiency. The paper analyzes the algorithm's principles, underscores the necessity of integral aperture determination and full-aperture data block processing, provides specific implementation steps, and applies the algorithm to point target simulation and experimental data from a vehicle-mounted ice radar. The experiments validate the algorithm's efficiency in stripmap SAR imaging. [ABSTRACT FROM AUTHOR]

This paper illustrates an interferometric inverse synthetic aperture radar based on three‐dimensional imaging and rotational velocity estimation from a multistatic setup with three ground‐based radars with non‐orthogonal baselines. The radar backscattering along the orbit is simulated based on physical optics approximation. The paper illustrates a novel shape‐dependent and rotation‐invariant feature called normalised eigenvalues for classification. A database of interferometric point clouds is generated using radar back scattering at different aspect angles and classified using various classification algorithms. The classification accuracy at varying SNR levels was evaluated using Monte Carlo simulations. [ABSTRACT FROM AUTHOR]

The stability of loess landslides affects the production and livelihood of the people in its vicinity. The stability of loess landslides is influenced by various factors, including internal structure, collapsibility, water content, and shear strength. The landslide stability of loesses can be analyzed by several geophysical methods, such as seismic refraction tomography (SRT), electrical resistivity tomography (ERT), micro-seismic technology, and ground penetrating radar (GPR). Geotechnical tests (compression and shear tests) and remote sensing techniques (Global Navigation Satellite System (GNSS), Interferometric Synthetic Aperture Radar (InSAR) and airborne 3D laser technology) are used for studying the landslide stability of loesses as well. Some of the methods above can measure parameters (e.g., fractures, water content, shear strength, creep) which influence the stability of loess landslides, while other methods qualitatively indicate the influencing factors. Integrating parameters measured by different methods, minimizing disturbances to landslides, and assessing landslide stability are important steps in studying landslide hazards. This paper comprehensively introduces the methods used in recent studies on the landslide stability of loesses and summarizes the factors which affect the landslide stability. Furthermore, the relationships between different parameters and methods are examined. This paper enhances comprehension of the underlying mechanisms of the stability of loess landslides to diminish disastrous consequences. [ABSTRACT FROM AUTHOR]

Due to the strong penetrability, long-wavelength synthetic aperture radar (SAR) can provide an opportunity to reconstruct the three-dimensional structure of the penetrable media. SAR tomography (TomoSAR) technology can resynthesize aperture perpendicular to the slant-range direction and then obtain the tomographic profile consisting of power distribution of different heights, providing a powerful technical tool for reconstructing the three-dimensional structure of the penetrable ground objects. As an emerging technology, it is different from the traditional interferometric SAR (InSAR) technology and has advantages in reconstructing the three-dimensional structure of the illuminated media. Over the past two decades, many TomoSAR methods have been proposed to improve the vertical resolution, aiming to distinguish the locations of different scatters in the unit pixel. In order to cope with the forest mission of European Space Agency (ESA) that is designed to provide P-band SAR measurements to determine the amount of biomass and carbon stored in forests, it is necessary to systematically evaluate the performance of forest height and underlying topography inversion using TomoSAR technology. In this paper, we adopt three typical algorithms, namely, Capon, Multiple Signal Classification (MUSIC), and Compressed Sensing (CS), to evaluate the performance in forest height and underlying topography inversion. The P-band airborne full-polarization (FP) SAR data of Lopè National Park in the AfriSAR campaign implemented by ESA in 2016 is adopted to verify the experiment. Furthermore, we explore the effects of different baseline designs and filter methods on the reconstruction of the tomographic profile. The results show that a better tomographic profile can be obtained by using Hamming window filter and Capon algorithm in uniform baseline distribution and a certain number of acquisitions. Compared with LiDAR results, the root-mean-square error (RMSE) of forest height and underlying topography obtained by Capon algorithm is 2.17 m and 1.58 m, which performs the best among the three algorithms. [ABSTRACT FROM AUTHOR]

As artificial intelligence technology advances, the application of object detection technology in the field of SAR (synthetic aperture radar) imagery is becoming increasingly widespread. However, it also faces challenges such as resource limitations in spaceborne environments and significant uncertainty in the intensity of interference in application scenarios. These factors make the performance evaluation of object detection key to ensuring the smooth execution of tasks. In the face of such complex and harsh application scenarios, methods that rely on single-dimensional evaluation to assess models have had their limitations highlighted. Therefore, this paper proposes a multi-dimensional evaluation method for deep learning models used in SAR image object detection. This method evaluates models in a multi-dimensional manner, covering the training, testing, and application stages of the model, and constructs a multi-dimensional evaluation index system. The training stage includes assessing training efficiency and the impact of training samples; the testing stage includes model performance evaluation, application-based evaluation, and task-based evaluation; and the application stage includes model operation evaluation and model deployment evaluation. The evaluations of these three stages constitute the key links in the performance evaluation of deep learning models. Furthermore, this paper proposes a multi-indicator comprehensive evaluation method based on entropy weight correlation scaling, which calculates the weights of each evaluation indicator through test data, thereby providing a balanced and comprehensive evaluation mechanism for model performance. In the experiments, we designed specific interferences for SAR images in the testing stage and tested three models from the YOLO series. Finally, we constructed a multi-dimensional performance profile diagram for deep learning object detection models, providing a new visualization method to comprehensively characterize model performance in complex application scenarios. This can provide more accurate and comprehensive model performance evaluation for remote sensing data processing, thereby guiding model selection and optimization. The evaluation method proposed in this study adopts a multi-dimensional perspective, comprehensively assessing the three core stages of a model's lifecycle: training, testing, and application. This framework demonstrates significant versatility and adaptability, enabling it to transcend the boundaries of remote sensing technology and provide support for a wide range of model evaluation and optimization tasks. [ABSTRACT FROM AUTHOR]