Search

In this paper, the bending, buckling, and free vibration of functionally graded porous (FGP) beams are studied based on two beam theories (with or without considering thickness stretching, respectively). The effect of thickness stretching is obtained by comparing the results of the two theories. Two symmetrical distributions and one asymmetrical distribution of pores are considered. Both Young’s modulus and mass density of the FGP beams are in gradient variation in the thickness direction. The governing equations are constructed using Hamilton’s principle. The analytical solutions are obtained by Navier’s method. The effects of slenderness ratios, pore distribution, porosity and thickness stretching on FGP beams have been investigated. The results show that the inhomogeneity of FGP beams in the thickness direction is positively correlated with the effect of thickness stretching. [ABSTRACT FROM AUTHOR]

This paper reports a detailed numerical investigation on the buckling aspects of laminated composite shell panels of three forms (cylindrical, spherical and hyperbolic paraboloid) with five support conditions exposed to linearly varying in-plane edge load employing eight nodded isoparametric finite element formulation. The impacts of different parameters including ply orientation, load factor, shell forms, aspect ratio, modulus ratio, curvature ratio, width-to-thickness ratio and angle of lamination on the buckling load of shell panels are examined. It is found that the various parameters addressed in this study have a remarkable impact on the buckling phenomena of laminated composite shell panels. Further, a comparison is made showing the effects of five types of compressive edge loads like uniform, triangular, parabolic, partial edge load and point load on the buckling phenomena of laminated shell panels with respect to five support conditions. [ABSTRACT FROM AUTHOR]

Mechanical metamaterials are valued for their diverse properties and potential applications. Due to the instability and large deformability of soft mechanical metamaterials (SMMs), geometric reorganization will occur and lead to some unusual properties. It is possible to change the properties of materials by varying the parameters. Conventional SMMs contain a periodic distribution of holes with the same size and shape, which can be changed to a lesser extent. Periodic dispersion of regular through-hole patterns of various sizes or shapes into elastomers, resulting in metamaterials with more mechanical functionality and deformation scenarios. In this paper, we investigated the influence of parameters on the buckling mechanical behavior of SMMs and the buckling mechanical behavior of structures with multiple sizes and geometric shapes. The parameters studied include geometric parameters (pore shape, porosity and area ratio) and physical parameters (Poisson's ratio and compression mode). Simulation of the buckling behavior of SMMs uses the finite element method. The finite element software ABAQUS is used, taking into account the almost incompressible characteristics of materials, the triangular quadratic plane strain hybrid element is selected (CPE6H). Numerical calculation gives the following results: Area ratio, pore shape and compression mode have obvious effects on buckling behavior, but Poisson's ratio has little effect; the influence of parameters on the buckling critical strains varied for SMMs with various pore shapes; very different buckling behaviors will result from swapping out the pattern of holes with the same size or shape for holes with two different sizes or shapes; the expression of buckling behavior is also varied when the mix of hole shapes is modified. These findings demonstrate that the design parameters may be used to achieve the desired buckling behaviors. This is a new method that can be used to control the deformation of structures; modify the properties of the SMMs without changing stiffness; simplify the structures without significantly changing the material properties. The design path of mechanical metamaterials is increased. [ABSTRACT FROM AUTHOR]

This work presents a thermoelectric vibration and buckling behavior of a bidirectional functionally graded piezoelectric porous (BD-FGPP) plate resting on the elastic foundation with arbitrary boundary conditions. The variation of the material properties in the FGPP plate is bidirectional, i.e. along longitudinal and thickness directions, using the modified power law distributions. Also, the BD-FGPP plate carries various porosity distributions, i.e. even, uneven and symmetric center types. The governing equation of the FGPP plate has been obtained through Hamilton's principle and solved through a higher-order finite element approach. The correctness and usefulness of the current technique are confirmed and compared with existing model outcomes available in the literature. A comprehensive parametric study has investigated the effect of the elastic foundations, porous exponent with various porosity distributions, bidirectional material exponent, temperature change, electrical loading and boundary conditions. The attained results are more valuable for designing functionally graded piezoelectric-based smart structures by considering the porosity distribution in a thermoelectric environment. [ABSTRACT FROM AUTHOR]

This paper conducts the analytical investigation on the buckling of cylindrical shells with axially variable elastic modulus subjected to axial compressive load for the first time. First, it proves that the axially distributed elastic modulus can be expressed as the combination of constant and variable component. Then, governing differential equations for buckling analysis are derived and exactly solved by the combined perturbation method and Fourier analysis. Accordingly, the closed analytical solutions for the cylinder with arbitrarily variable elastic modulus are obtained, which reveal the explicit relations among buckling load, shell sizes and elastic modulus functions. Based on the presented analytical formulas, four types of elastic modulus variations for shell material which are uniform, periodic, linear and combined are studied in detail, and the results are also well verified. The derived analytical solutions in this paper can serve as benchmarks for buckling analyses of thin-walled cylinders with elastic modulus variations resulted from design, material manufacturing process, material imperfections and so on. [ABSTRACT FROM AUTHOR]

The woven structure made of naturally curved (in-plane) ribbons has smooth geometry and fewer geometric imperfections, but there is no study of its buckling mechanical properties under vertical loads. The aim of this paper is to investigate buckling mechanical properties of spherical woven structures. Three spherical woven structures with different ribbon types and six new spherical woven structures with different ribbon widths and thicknesses were designed and the quasi-static vertical compression tests were carried out. The buckling load of spherical woven structures were studied by nonlinear finite element and ring buckling theory. Results indicate that the failure mode of the spherical weave structure under vertical loading can be divided into two stages, where a flat contact region forms between the spherical weave structure and the rigid plate and inward dimple of ribbons. Spherical weave structures using naturally curved (in-plane) ribbon weaving have better buckling stability than those woven with straight ribbon. Based on theoretical and finite element analysis, we propose a buckling load equation and buckling correction factor equation for the new spherical weave structure under vertical compression load. The formula is validated and has good agreement with the test results, which could help to design the stability of spherical weave structures with in-plane ribbons. [ABSTRACT FROM AUTHOR]

We previously developed a simplified finite element (FE) "unit" model to reproduce the mechanical interaction between the smooth muscle layer and elastic lamina (EL) in the aortic media. Nevertheless, whether this simplified FE model can represent the structure of a real medial wall and whether its modeling technique can help in developing a highly sophisticated and structure-based aortic FE model should be determined. Therefore, this study aimed to computationally represent EL buckling in the aortic medial ring at an unloaded state based on the integrated unit models and reproduce transmural variations in EL waviness across the vascular wall. We confirmed that the inner and outer layers of the medial wall were relatively subjected to compressive and tensile residual stresses, respectively, at the unloaded state, implying that the ring model will open spontaneously when it is radially cut. In addition, the residual stresses computed under such a stress-free condition were comparable to the analytically estimated values, partially supporting the validity of our modeling approach. Although further study is still required, the information obtained in this study will greatly improve the understanding of basic aortic physiology and pathophysiology and provide a basis for performing more sophisticated computational modeling of the aortic wall. [ABSTRACT FROM AUTHOR]

The buckling and postbuckling behaviors of functionally graded graphene platelets-reinforced composite (FG-GPLRC) circular plates are studied based on the classical nonlinear von Karman plate theory. The effective Young's modulus of the composite is estimated using the modified Halpin–Tsai micromechanical model, and the effective Poisson's ratio is estimated by the rule of mixtures. Governing equations of the problem are derived based on the Hamilton principle and the numerical solutions of critical loads and postbuckling deflection–load relationships are calculated using the shooting method. Different from the existing linear buckling analysis based on the Terriftz criterion, the study with considering the global deformation of the plates, we analyze the influencing factors of the critical buckling loads and postbuckling paths of the FG-GPLRC circular plates subjected to uniformly distributed radial pressure. The results show that the content, geometric parameters and distribution pattern of GPL have great influences on the critical buckling loads and the post-buckling bearing capacities of the circular FG-GPLRC plates. [ABSTRACT FROM AUTHOR]