Search

This study evaluates the impact of sales promotions that are featured in store flyers distributed by prominent retailers and their capacity to attract consumers to their establishments. A distinctive conceptual framework is introduced that scrutinizes the influence of ethically-minded consumer behavior, digital citizenship/literacy, and a retailer's orientation toward environmental sustainability and explicit ecological concerns. A quasi-experimental design was used to formulate four distinct scenarios from a possible set of eight, stemming from the combinations of three variables: 2 Retailer Positioning (green vs. without explicit ecological claims) × 2 Flyer Mediums (paper vs. digital) × 2 Discount Levels (5% discount vs. 30% discount). Through an online survey, a sample of 269 responses was garnered to gauge consumer reactions to these store flyers, evaluating their attitudes and receptiveness. The findings suggest that attitudes toward paper flyers were more favorable when presented by non-green retailers compared to their green counterparts. This can be attributed to a perceived inconsistency between a green brand positioning and the use of paper flyers. Furthermore, the propensity to transition to digital flyers was notably stronger for green retailers compared to non-green retailers, but this inclination was most pronounced when higher discounts were offered. [ABSTRACT FROM AUTHOR]

Xuan paper is one of the most famous handmade papers in China and is an important paper for conservation. However, the evenness of Xuan paper has not yet received much attention. In this study, the distribution of the in-plane grammage and mechanical properties of Xuan paper are measured. It is found that the distribution of the in-plane grammage and mechanical properties of Xuan paper is uneven. In the handmade direction, the grammage and mechanical properties of Xuan paper are overall largest in the lower area, followed by the upper and middle areas. The sheet forming process of Xuan paper has an important effect on the distribution of in-plane grammage, mechanical properties, and fiber orientation of Xuan paper. The folded state has a negative effect on the mechanical properties of the folded area of Xuan paper. This study will help raise awareness of the unevenness in physical properties of Xuan paper, which is important in both conservation and research applications. [ABSTRACT FROM AUTHOR]

Cellulose was isolated from recycled pulp and paper sludge and used to synthesize cellulose nanocrystals. Response surface methodology and Box-Behnken design model were used to predict, improve, and optimize the cellulose isolation process. The optimal conditions were a reaction temperature of 87.5 °C, 180 min with 4% sodium hydroxide. SEM and TEM results revealed that the isolated cellulose had long rod-like structures of different dimensions than CNCs with short rod-like structures. The crystallinity index from XRD significantly increased from 41.33%, 63.7%, and 75.6% for Kimberly mill pulp sludge (KMRPPS), chemically purified cellulose and cellulose nanocrystals, respectively. The TGA/DTG analysis showed that the isolated cellulosic materials possessed higher thermal stability. FTIR analysis suggested that the chemical structures of cellulose and CNCs were modified by chemical treatment. The cellulose surface was highly hydrophilic compared to the CNCs based on the high water holding capacity of 65.31 ± 0.98% and 83.14 ± 1.22%, respectively. The synthesized cellulosic materials portrayed excellent properties for high-end industrial applications like biomedical engineering, advanced materials, nanotechnology, sustainable packaging, personal care products, environmental remediation, additive manufacturing, etc. [ABSTRACT FROM AUTHOR]

During the early Cold War, it was difficult for American intelligence to penetrate the Iron Curtain but a potential solution soon arose: émigré intelligence groups such as the Magyar Harcosok Bajtársi Közössége (MHBK) or 'Association of Hungarian Veterans'. This group, however, turned out to be an intelligence 'paper mill'. Attempts at trans-Atlantic cooperation with the MHBK and similar groups failed as they lost most of their good sources and were penetrated by communist security services. By the mid-1950s, US intelligence cut these groups off, took over their good sources, and established a source registry to prevent recurrence of the problem. [ABSTRACT FROM AUTHOR]

Thiophene sulfide is difficult to be removed by hydrodesulfurization. In this study, ZnCl2-waste paper fiber activated carbon was used as adsorbent to remove thiophene sulfide from simulated oil by hydrothermal modification. Under the optimum condition of ammonia modification, the adsorption capacity of modified adsorbent to BT is 14.8 mg S/g, 2.98 times that of unmodified. BET, FTIR and Boehm analysis showed that the mesopore volume of ammonia modified adsorbent increased by 96.62% and the mesopore ratio increased from 12.58% to 43.40%, which was conducive to improving the adsorption rate. After modification, the basic groups on the surface of the adsorbent increased by 44.3 times, and –NH3+, –OH and –NH2 enhanced the electron attraction and hydrogen bonding force between the adsorbent and BT molecule. Adsorption isotherms, adsorption kinetics and adsorption thermodynamics show that the adsorption process is spontaneous, entropic and exothermic. The pseudo-second-order kinetic rate constant increases with the increase of adsorption temperature, indicating that the increase of temperature is beneficial to accelerate the adsorption rate. The adsorption desulfurization process follows the mechanism of single and multilayer adsorption mixing. The results of this study can help to reveal more clearly that biobased activated carbon can be modified to adsorb thiophene sulfide. Ammonia modified adsorbents enhance the adsorption capacity for benzothiophene [ABSTRACT FROM AUTHOR]

Predatory publishing is the unethical and dishonest behavior of publishers who take advantage of researchers by charging them too much money and not providing good editing and peer-review services. Scholars, publishers and policymakers are seeking solutions to combat predatory publishing, which has become a major academic problem. This research paper provides a bibliometric analysis of the citation patterns and trends in the predatory publishing literature. The study analyzed the 100 top-cited papers on predatory publishing and provided insight into the types of documents, journals, authors, and countries that contributed to this field. The average citation per paper in the top 100 selected publications was 53.67. Open-access publications received a significantly higher average citation per paper than subscription-based papers. "Article" was the major type of document published, followed by "Notes," "Reviews" and "Editorials." Nature and Learned Publishing were the journals that contained the highest number of top-cited articles. J. Beall and D. Moher authored the highest number of papers, while A. Grudniewicz had the highest average citation per paper. USA and Canada were the top countries in these top-cited publications. This study will be beneficial to the all the stakeholders who may be interested in this area of research. [ABSTRACT FROM AUTHOR]

Per- and polyfluoroalkyl substances (PFAS) analysis has become crucial due to their presence in the environment, their persistence and potential health risks. These compounds are commonly used in food contact materials (FCM) as a coating to provide water and grease-repellent properties. One of the pathways for PFAS to enter the human body is either through direct consumption of contaminated food or indirectly through migration from FCM into food. The purpose of this study was to investigate where the initial contamination of paper FCM occurs. We analysed paper material consisting of fresh fibre and secondary materials, intended to produce food packaging for the presence of PFAS. The samples were extracted and analysed for 23 different PFAS substances using the targeted approach with LC tandem mass spectrometry (LC-MS/MS). This analytical technique detects specific, easily ionisable PFAS with high sensitivity. However, one drawback of this approach is that it allows the identification of less than 1% of the PFAS known today. For this reason, we used combustion ion chromatography (CIC) to determine the content of extractable organic fluorine compounds (EOF) and compare it to the total fluorine content. The targeted analysis using LC-MS/MS measured an average sum concentration of PFAS of 0.17 ng g−1 sample. Our research shows that the primary PFAS contamination happens during the recycling process since all of the samples in which the targeted PFAS were measured belonged to the secondary material. The most frequently detected analytes were PFOA and PFOS, detected in 90% and 62% of the samples, respectively, followed by PFBS (in 29% of the samples). CIC showed that measured PFAS via LC-MS/MS amount to an average of 2.7 × 10−4% of total fluorine content, whereas the EOF was under the LOD in all of the measured samples. This result highlights the complexity of the accurate determination of PFAS compounds, displaying what kind of information the chosen methods provide. [ABSTRACT FROM AUTHOR]

La transición hacia el uso del papel para la enseñanza de la escritura en las escuelas elementales públicas en México no fue sencilla. Al finalizar el siglo XIX, se había cuestionado el uso de las pizarras por el riesgo que representaban para la salud, pues muchas veces los estudiantes borraban sus escritos con saliva y el material con el que estaban fabricadas no siempre guardaba las especificaciones necesarias, además el ruido al escribir era insoportable. En cambio, el papel, desde el punto de vista higiénico, pedagógico y estético, fue considerado un material superior frente a la dureza de la pizarra, el brillo de la superficie y la poca precisión que se obtenía en el trazo de las letras. Derivado de este planteamiento, se vislumbró seriamente la posibilidad de la adopción de papel en las escuelas oficiales. Sin embargo, este material era escaso y muy caro. Hacia el cambio de siglo, sólo dos fábricas de papel podían surtir a las escuelas y era necesario que abarataran el precio, que el sistema de distribución garantizara el abastecimiento y que el suministro fuera continuo. Este artículo analiza el inicio del proceso de reconversión de una tecnología para la enseñanza como era la pizarra por el papel. Analizo el gasto que significó y cómo esta modificación fue resultado de una multiplicidad de relaciones sociales, culturales, económicas y políticas que se entrecruzaron para dar una nueva configuración del tiempo, el ruido y los valores establecidos en el salón de clases. The transition to the use of paper in public elementary schools in Mexico was not easy. At the end of the nineteenth century, the use of slates had been questioned due to the health risk they represented since students often erased their writing with saliva and the material with which the slates were made did not always meet the necessary specifications. On the other hand, paper, from a hygienic, pedagogical and aesthetic point of view, was considered a superior material compared to the hardness of the slate, the shine of the surface and the lack of precision obtained in the tracing of the letters. Derived from this approach, the possibility of changing materials in official schools was seriously envisioned. However, the paper represented a very high cost. Only two paper mills could supply the schools and it was necessary to lower the price, and guarantee the supply by enhancing the distribution system. This article analyses the beginning of the conversion process of a technology for learning to write such as the slate for paper. I analyse the expense that it meant for the authorities and families, how the change was the result of a multiplicity of social, cultural, economic and political relations that intersected to give a new configuration of time, noise and established values in the classroom. [ABSTRACT FROM AUTHOR]

We have achieved a successful synthesis of a label-free, flexible, portable, and colour-indicating biosensor using cholesteric nanostructure liquid crystals (LCs), commonly referred to as cholesteric LCs (CLCs), on paper fibres. This innovative approach holds significant promise for rapid screening in precision medicine and other applications. We incorporated optically active nematic LCs in various configurations within CLCs, allowing them to rotate along different axes. When exposed to light, these LCs reflected light at specific wavelengths. By employing polarised optical microscopy and a charged couple device (CCD), we conducted titration experiments with bovine serum albumin (BSA) on the paper substrate and quantified protein concentrations based on the observed colour shifts. Utilising internal Python pixel analysis software, we evaluated the red, green, and blue colour components, which served as biomarkers for different BSA concentrations. Our results demonstrated a linear correlation between BSA concentration and colour variations. This CLC-based paper-substrate biosensor exhibits the potential to efficiently screen a large number of samples, thereby enhancing the diagnostic accuracy in clinical settings. Combining the colour-indicating and quantifiable attributes of CLCs with the affordability and portability of paper substrates, we have developed a versatile biosensor. Its ease of use, rapid response, and high sensitivity make it a promising tool for future disease detection endeavours. [ABSTRACT FROM AUTHOR]

As an important substrate of traditional Chinese cultural relics in museums, paper is the material with highly light sensitivity, which is susceptible to irreversible lighting damage. To provide high-quality viewing, it is vital to study the parameters of light sources in consideration of paper substrates' long-term conservation. As an important factor affecting both conservation and viewing, there are some issues concerning correlated color temperature (CCT) in the relevant standards, namely, the inconsistent recommended values. In this research, paper samples were subjected to accelerated irradiation experiments for 1440 h by 10 narrow-band lights in the visible range, and the infrared spectra were measured periodically. The calculated oxidation index was used to obtain the damage response function to different spectral wavelengths and exposures. Subsequently, using the method of exhaustion, 9477 spectra with a CCT range of 2650–4150 K that met the viewing requirements were screened, and lighting damage to paper substrates was calculated using this function. Based on that, the correlation between CCT and lighting damage to paper substrates and their standard deviations was obtained. Combining the previous research on recommended for CCT pigments, a preliminary recommended CCT of 3100–3200 K in selecting light sources for traditional Chinese paper relics was proposed. It is worth emphasizing that it is still necessary to use the spectral power distribution of light sources, as the underlying independent variable that leads to damage, to further calculate the lighting damage using the function mentioned above to achieve protective lighting. [ABSTRACT FROM AUTHOR]

Conventional multi-cylinder drying of paper and board involves a mixture of conductive drying from steam-heated dryer cylinders and convective drying by the flow of heated air over the surface of the paper web in the pockets. Pocket ventilation is a critical component in assisting heat and mass transfer during the drying process but is the primary contributor toward removing evaporated water from the web. Air temperature, velocity, and humidity are critical parameters involved in the convective drying process. This paper covers an experimental study involving the design and development of a small lab-scale setup for convective drying of various grades of paper and board, monitoring multiple parameters like paper temperature, moisture content, air humidity, temperature, and velocity measured in situ as the drying proceeds with continuous and accurate sampling capabilities for all parameters in the sample and the system. Instantaneous drying rates, heat, and mass transfer coefficients were also deduced for every time step till the paper completely dried. Furthermore, the coefficients obtained were also reported in the form of dimensionless correlations, and the results were compared against traditional correlations used in the modeling of paper drying. This data will be useful in process development, modeling, design, and the paper drying process simulation. [ABSTRACT FROM AUTHOR]

Medication prescription procedures were reviewed at psychiatric residential treatment centers (RTC), and a quality improvement project was conducted in order to implement integrated electronic medical records (EMR) and computerized provider order entry (CPOE). To assess the impact of preexisting prescribing practices on RTCs, surveys were sent anonymously to current and past providers of regional and local RTCs. The surveys assessed the impact of the prescribing protocol on workflow, the frequency of medication errors, the impact such errors had on patient care, the overall provider satisfaction, and the discrepancies between electronic and paper charts. Current providers were then re-surveyed after implementing the integrated CPOE system in May 2020, during the COVID-19 pandemic. The first round of provider survey results revealed that the majority of staff (n = 10, 70%) observed frequent medication errors and were largely dissatisfied with the current medication ordering and administration process (n = 10; 70%). Incident Response Improvement System (IRIS) reports revealed the most common medication errors were omissions, incorrect dosing, and incorrect medications administered. After the initiation and implementation of the CPOE, staff satisfaction increased with the process (n = 14; 50%) noting that medication errors were less frequent than before (n = 14; 50%). [ABSTRACT FROM AUTHOR]

Cellulose nanofibrils (CNF) can be modified to be used as a coating on food paper packaging. Previous research on PVA/CNF composites showed a low viscosity, which impacted their performance on the coating paper process. To overcome this problem, a thickening agent, such as carboxymethyl cellulose (CMC), is needed. In this work, the effect of CMC on PVA/CMC/CNF nanocomposites was investigated by varying the concentrations of CMC with PVA/CMC and CNF ratio of 80:20 and 90:10. The nanocomposites were characterized by their physical and tensile properties which could affect their coating performance. Moreover, the coating process was conducted on paper and the performances of the coated paper were studied. The results showed that the increase in CMC concentration led to an increasing viscosity and good zeta potential, suggesting good dispersion. Moreover, the addition of CMC improved the tensile properties of PVA/CMC/CNF nanocomposites. However, SEM analysis of PVA/CMC-1:CNF (80:20) revealed the occurrence of agglomeration which might influence the performance of the coated paper. Interestingly, PVA/CMC-1:CNF (80:20) had an excellent water resistance, with the lowest Cobb60. Moreover, the addition of CMC 1 wt% increased WVTR, which remained lower than the blank sample. Meanwhile, PVA/CMC-2:CNF (80:20) demonstrated the best performance in the oil absorption and tearing resistance test. In summary, the addition of CMC can effectively improve the physical and tensile properties of the PVA/CMC/CNF, as well as the barrier properties and tear strength of the PVA/CMC/CNF coated paper. The results demonstrate the potency of this material as a coating for food packaging paper. [ABSTRACT FROM AUTHOR]

This white paper consists of evidence-based recommendations for conducting forensic interviews with children. The recommendations are jointly drafted by researchers in child interviewing active within the European Association of Psychology and Law and are focused on cases in which children are interviewed in forensic settings, in particular within investigations of child sexual and/or physical abuse. One particular purpose of the white paper is to assist the growing Barnahus movement in Europe to develop investigative practise that is science-based. The key recommendations entail the expertise required by interviewers, how interviews should be conducted and how interviewers should be trained. Interviewers are advised to use evidence-based interview protocols, engage in hypothesis-testing and record their interviews. The need to prepare the interview well and making efforts to familiarise the child with the interview situation and create rapport as well as acknowledging cultural factors and the possible need for interpretation is underscored, and a recommendation is made not to rely on dolls, body diagrams and the interpretation of drawings in the interviews. Online child interviewing is noted as showing promising results, but more research is warranted before conclusive recommendations can be made. Interviewers should receive specialised training and continuous feedback on their interviews. [ABSTRACT FROM AUTHOR]

AbstractMilk is a major dietary source of calcium; thus, accurate and precise quantification of calcium in milk and other dairy products is necessary for quality control. Conventional instrumental methods are sensitive and accurate but require expensive instrumentation, sample pretreatment, skilled personnel, and a long detection time. Herein, a microfluidic paper-based analytical device (µPAD) was developed to quantify calcium ions (Ca2+) in milk using a smartphone as a detector. The method utilized a complexometric reaction between Ca2+ and ethylene diamine tetraacetic acid with murexide as an indicator. The response was the average color intensity at the detection zones measured using the Color Picker application. The proposed µPAD exhibited a good linear detection range (1 to 10 mM), a low detection limit of 0.42 mM, and a short analysis time of 2 min. The determination of Ca2+ in milk samples using the proposed µPAD was consistent with a potentiometric method. The proposed µPAD demonstrates many advantages, including rapid detection, acceptable accuracy, low cost, low sample volume, and suitability for on-site quantification of Ca2+ in real samples. [ABSTRACT FROM AUTHOR]

This paper discusses the relevance of using physical situations to introduce the concept of angles at elementary school. We compare the effectiveness of two geometry teaching sequences. In the first one (physical sequence), the pupils learned the angle concept by experimenting on the playground (i.e. mesospace) and then modelling the situation. In the second one (paper-and-pencil sequence), the pupils worked solely in the space of a sheet of paper (i.e. microspace). In both sequences, pupils compared areas of space delineated by an angle between two directions. Pupils in two Grade 3 classes were exposed to one of the two teaching sequences. The unfolding of these sequences was videotaped and analyzed, and the pupils were tested individually, before and after teaching, to measure each sequence's effectiveness. Results showed that both sequences are effective to grasp the angle concept: Most pupils overcame the common erroneous conception of comparing angles' sides' lengths instead of angle openness. The comparison of areas of space delineated by an angle between two infinite directions, which is the two sequences' common core, seems to be the key factor underlying angle conceptualization. This paper ends with a discussion of these results' teaching implications and the merits of each sequence. [ABSTRACT FROM AUTHOR]

This article is a response to Amanda Kottler's paper on the concept of multiple self-states and the role of writing in understanding clinical moments. The author, Joye Weisel-Barth, discusses the symbolic presence of Isobel in Kottler's paper and how it represents a hidden self-state that brings about transformative experiences. Weisel-Barth also explores the use of fiction as a tool for self-discovery and emphasizes the importance of aesthetic engagement in uncovering hidden aspects of oneself. The article highlights the power of writing and imagination in gaining a deeper understanding of the self, and encourages readers to consider the broader implications of psychoanalysis in understanding the self and its connection to the surrounding environment. [Extracted from the article]

This study aims to explore how e-textbooks with emotional design affect students' emotion, cognitive load and learning achievement. There were 147 freshman students in total: the experimental group I, II and control group consisted of 49, 47 and 51 students, using e-textbooks with emotional design, without emotional design and traditional paper textbooks. The results reveal the following: Students' emotion after using e-textbooks with emotional design is more positive than those using e-textbooks without emotional design and paper textbooks. Students' cognitive load after using e-textbooks with emotional design is significantly lower than those using etextbooks without emotional design. Students' learning achievement after using two types of e-textbooks is better than after using paper textbooks. Comparing all types of textbooks altogether, emotion has a significantly positive correlation with learning achievement, and both emotion and learnng achievement are significantly and negatively correlated with cognitive load. For the three types of textbooks, the relationship between emotion and learning achievement all becomes not significantly correlated. For two types of e-textbooks, cognitive load and learning achievement become not significantly correlated, disturbed by the digitalization of textbooks. Instructors are suggested to firstly adopt e-textbooks with emotional design, those without emotional design secondly, and paper textbooks rank last. [ABSTRACT FROM AUTHOR]

A descriptive annotated bibliography is presented of recent selected publications dealing with the reported health benefits and risks of fish and seafood consumption; fish and seafood including farmed and wild-caught finfish, crustaceans, mollusks, and seaweeds. The bibliography is presented in four parts, namely (1) review papers dealing with both the health benefits and risks of fish and seafood consumption, (2) specific papers dealing with health benefits related to: antioxidants; bone health; brain and mental health; cancer prevention; diabetes prevention; elderly and senior adults; fermentation; heart health and hypertension; immune response and allergies; infant and child health; lipids, fatty acids and sterols; minerals and trace elements; obesity and overweight reduction; polysaccharides; pregnancy and gestational health; proteins, peptides and amino acids; and vitamins and bioactive compounds; (3) specific papers dealing with health risks related to: algal blooms and shellfish biotoxins; antibiotics use and residues; cancer risks; chemicals; chronic kidney disease; microbial quality and safety; microplastics; minerals and heavy metals; parasites and pathogens; pesticides and persistent organic pollutants; public perception and media; seafood allergy; and smoking risks; and (4) supporting papers dealing with consumption advisories and dietary guidelines; improved decontamination and processing methods; and fish, food and nutrient security. A total of 552 papers are presented together with their annotated summaries. On the basis of the papers presented in this review, it is believed that the higher nutritional value and health benefits derived from increased fish and seafood consumption far out-way the potential negative risks to human health, and as such fish and seafood represent a valuable and much healthier alternative than processed fast-foods and many terrestrial animal food products in the global fight against heart disease and related health ailments. [ABSTRACT FROM AUTHOR]

The apps for drawing are present in our children's life. Nevertheless, little is known about the impact of mobile technology on the freehand drawing educational activity. There are few works which are contextualised within short periods of time, with teachers who are not theirs and, in some cases, outside the children's classroom. In this paper, we are focussed on the use of technology on freehand drawing activity. Thus, we have compared the graphics produced by 4- and 5-year-old children with paper&crayon in comparison with those with tablet-finger. Children made the drawings during a planned free-drawing activity, in their ordinary classrooms, with their teachers and during five sessions. Assessment of drawings has evidenced tablet feasibility for making graphics. Nevertheless, with the passing of time, quality of graphics (tablet-finger vs paper&crayons), are nearly matched, demonstrating the low impact level technology has on this activity. In addition, if drawings are analysed specifically according to ages, results have shown that both groups have to develop adaptation strategies of visual perceptual skills and fine motor skills for the touch screen in order to obtain the same quality in the drawings made on both support types. [ABSTRACT FROM AUTHOR]