Search

This short paper presents an architectural overview of an agent-based framework called iv4XR for automated testing that is currently under development by an H2020 project with the same name. The framework's intended main use case of is testing the family of Extended Reality (XR) based systems (e.g. 3D games, VR sytems, AR systems), though the approach can indeed be adapted to target other types of interactive systems. The framework is unique in that it is an agent-based system. Agents are inherently reactive, and therefore are arguably a natural match to deal with interactive systems. Moreover, it is also a natural vessel for mounting and combining different AI capabilities, e.g. reasoning, navigation, and learning.

This white paper argues that formal methods need to be better rooted in higher education curricula for computer science and software engineering programmes of study. To this end, it advocates

Paper mill sludge (PMS) raises critical environmental issues due to its disposal problem, but its high sugar content and well-dispersed structure make it a great feedstock for biochemical production. The technical feasibility of integrating cellulase enzyme production into lactic acid (LA) fermentation from PMS was investigated in this study. The low ash content of PMS suggests a great potential for cellulase production. The enzyme produced using PMS without any treatment gave an activity of 7.8 FPU/ml, a performance comparable to the commercial enzyme, Cellic CTec 2. The LA yield from PMS with in-house enzyme was 64.7% and 73.7% at the enzyme loading of 10 and 15 FPU/g-glucan, respectively. The LA obtained was optically pure L- isomer with over 99% purity. The optimal condition of LA production by Bacillus coagulans was found to be 50 °C and pH 5.3 (with 50 g/L CaCO3). The nutrient effect of yeast extract (YE) and corn steep liquor (CSL) was substrate dependent, and CSL could substitute YE as an inexpensive nutrient when using PMS as a substrate.

There is a growing demand for rapid and sensitive detection approaches for pathogenic bacteria that can be applied by non-specialists in non-laboratory field settings. Here, the detection of the typical E. coli enzyme &beta, glucuronidase using a chitosan-based sensing hydrogel-coated paper sensor and the detailed analysis of the reaction kinetics, as detected by a smartphone camera, is reported. The chromogenic reporter unit affords an intense blue color in a two-step reaction, which was analyzed using a modified Michaelis&ndash, Menten approach. This generalizable approach can be used to determine the limit of detection and comprises an invaluable tool to characterize the performance of lab-in-a-phone type approaches. For the particular system analyzed, the ratio of reaction rate and equilibrium constants of the enzyme&ndash, substrate complex are 0.3 and 0.9 pM&minus, 1h&minus, 1 for &beta, glucuronidase in phosphate buffered saline and lysogeny broth, respectively. The minimal degree of substrate conversion for detection of the indigo pigment formed during the reaction is 0.15, while the minimal time required for detection in this particular system is ~2 h at an enzyme concentration of 100 nM. Therefore, this approach is applicable for quantitative lab-in-a-phone based point of care detection systems that are based on enzymatic substrate conversion via bacterial enzymes.

Sample pretreatment process is usually performed before real sample detection. Extraction is one of the most prevalent pretreatment methods. Due to the unequal solubility in two liquid phases, target is extracted (usually from water to organic phase) and further detected with laboratory instruments. Although the analytical instruments have high sensitivity and selectivity, they are relatively expensive and require skilful hands, which is restricted to laboratory use. Here, paper-based analytical devices (μPADs) for measuring samples extracted with organic solvents were tested. The μPADs were employed as a filter for buffer exchange, allowing the transfer of targets from organic solvent to water-based buffer, which could be specifically detected by water-based assays. As an example, polychlorinated biphenyls (PCBs) in n-hexane were detected with aptamer and gold nanoparticles (AuNPs) on μPADs within 30 min. The result of colour change can be recognized from 70.0 ng/L with a low loading amount (0.5 μL). Instead of laboratory instrumental analysis with relative high cost, this assay showed the promising utility of μPADs for target detection after sample pretreatment, which could be utilized as a general platform for inexpensive onsite detection.

A recent commentary by Santhosh and Ravindran on our paper (Int. J. Hydrogen Energy 2014, 39:10606) demonstrated that the interaction between H2 and MXene (Sc2C and Ti2C) phases are not Kubas-type and should be of weak physisorption, and thus made a conclusion that 2D Sc2C and Ti2C are not suitable for practical hydrogen storage applications. In this responses, we recalculated hydrogen adsorption on 2D Sc2C and Ti2C by using different exchange-correlation functionals. And based on the calculated results, bare MXenes (especially the Ti2C) are suitable as hydrogen storage materials at temperatures of several tens degrees lower than room temperature. And the hydrogen adsorptions on the MXenes terminated with oxygen group were also investigated. Among the Ti2C, Sc2C and their oxygen-functional counterparts, the binding energy of H2 on Sc2CO2 surface is the closest to the ideal range of 0.16–0.42 eV/H2 at ambient conditions, and thus the Sc2C with oxygen group is expected to be more suitable as hydrogen storage materials.

A new method for dispatching microfluid is presented. A steel ball of 2mm diameter is placed on a 128 degrees YX LiNbO3 substrate. A PDMS frame is mounted on the piezoelectric substrate for definin...

In recent times, it has been witnessed that wireless systems based on IoT-based have developed rapidly in various sectors. The IoT (Internet of Things) is the network in which physical devices, equipment, sensors and other objects can communicate among themselves without human involvement. The WSN (Wireless Sensor Network) is a central component of the IoT, which has proliferated into several different applications in real-time. The IoT and WSNs now have various critical and non-critical applications impacting nearly every area of our everyday life. WSN nodes are usually small and battery-driven machines. Thus, the energy effective data aggregation techniques that increase the lifespan of the network are highly significant. Various approaches and algorithms for energy-efficient data aggregation in IoT-WSN systems were presented. This paper reviews the literature with specific attention to aspects of wireless networking for the preservation of energy and aggregation of data.

Highlights • Numerical simulations of acoustophoresis in pulp flow is conducted. • Parametric study of fiber characteristics, pulp flow regimes and acoustic parameters are conducted. • A feasibility study of industrial acoustophoresis for pulp concentration is performed. • A potential concentration gain of 15% is obtained experimentally., In pulp and paper mills, mechanical processes such as screening and washing are commonly used to remove accumulated solid suspensions and concentrate the pulp. For environmental reasons and to optimize paper production, an emerging challenge is to develop alternative methods to concentrate paper pulp between 3 % and 6 % consistency for which the mixed pulp-water flow is complex. Among the proposed solutions in the literature, solutions based on acoustic levitation, also referred as acoustophoresis, of low-consistency pulp have been demonstrated as a potential solution for efficient pulp concentration and water recirculation. However, no sensitivity analysis on the ultrasound and physical parameters was proposed, limiting the extension to a realistic application. Thus, this paper presents a numerical modeling of acoustophoresis for pulp flow concentration in a pipe. For this purpose, the pulp flow is defined as a pseudo-homogenous fluid with a turbulent Low Re k- ∊ formalism, and the pulp particles are considered spherical and deflected by two acoustic forces, namely the acoustic radiation force and the Stokes drag force, both induced by an ultrasound wave generated along the walls of a circular pipe. The combined action of these two forces in the pulp flow enables to concentrate the particles at the center of the pipe. The influences of particle size and mechanical properties, fluid properties and ultrasound parameters are analyzed within a parametric study to optimize the particle deflection and the pulp concentration. The experimental feasibility of the industrial use of acoustophoresis for the concentration of paper pulp is demonstrated with a concentration gain up to 15 %.

Novel nature-based engineered functional materials combined with sustainable and economically efficient processes are among the great challenges for the future of mankind. In this context, this work presents a new generation of versatile flexible and highly conformable regenerated cellulose hydrogel electrolytes with high ionic conductivity and self-healing ability, capable of being (re)used in electrical and electrochemical devices. They can be provided in the form of stickers and easily applied as gate dielectric onto flexible indium–gallium–zinc oxide transistors, decreasing the manufacturing complexity. Flexible and low-voltage (

Organic-rich pulp and paper mill sludge (PPMS) has the potential to become a renewable carbon source for producing alternatives to fossil-based product. In this work, PPMS treated by hydrothermal carbonization (HTC) was investigated based on its pyrolysis properties. The pyrolytic mechanism, kinetics data and product of the sample were studied using TG as well as pyrolysis tests in Py-GC/MS and a bench-scale reactor at 450, 550, and 650 °C. The results show that the thermal decomposition of feedstock is a two-stage reaction. The mean activation energy of the pyrolysis of HTC treated PPMS was estimated as 233.08 kJ/mol, which is higher than that of the pyrolysis of paper sludge reported before. The changes in enthalpies, entropies and Gibbs free energies from the reactants to the activated complex were estimated. The concentration of monocyclic aromatic hydrocarbons in the derived organic liquid fraction shows a positive correlation with the pyrolysis temperature. At 550 °C, the organic liquid fraction reached its highest yield at 13.7% with an oxygen level of 10.7 wt% and a higher heating value of 35.9 MJ/kg. The pyrolytic chars show that a molar ratio of O:C is less than 0.2, which shows potential for use as a carbon sink.

This paper introduces the background, concept and definition of the Industry Commons. It initiates a discussion on the positioning of the Industry Commons Ecosystem (ICE) with respect to current research directions in advanced manufacturing and production systems that shape advances in engineering and technology, novel business models and innovation breakthroughs. The potential value of data sharing across industrial domains is estimated at over $100 billion, particularly in view of optimising manufacturing processes. Data sharing across domains however faces a series of well-documented challenges associated with the lack of semantic interoperability and related standards, management of trust and sustainability. Solving bottlenecks in data sharing requires a systemic approach to data management, which can account for all aspects of data use, levels of application, attribution and dynamic exchanges. In this paper we propose a high-level ecosystem approach that integrates societal values with digital affordances of industry's cognitive-assisted processes, remote interfacing, hybrid applications and large-scale value networks. Early development of an Ontology Commons EcoSystem (OCES) is presented as the key enabling framework for Industry Commons interoperability and a series of enabling frameworks form the basis of future research directions in Trusted Data Sharing and Closed-Loop Lifecycle Management for greater sustainability.

Antibacterial facial tissue papers were prepared by solution casting method with chitosan loaded bleached cellulosic pulp. Chitosan, in the film act as an antibacterial agent. Tissue paper films were fabricated by 50% cellulose and 50% chitosan (by weight, dry basis). Mechanical properties of the films were evaluated. It was found that tensile strength (TS) and elongation at break (EB) of the 50% chitosan contain films were 24 MPa and 10.8% respectively. To increase the plasticity of the tissue paper films glycerin was added 0.4 to 2% (by weight). It was found that with the incorporation of 1% glycerin in the tissue paper films the flexibility increased to 50%. Molecular interaction due to the chitosan addition was investigated by Fourier Transform Infra-Red (FTIR) spectroscopy. Water uptake property of glycerin contains films were also evaluated. In the soil medium, the degradation properties of the tissue paper films were carried out. The antibacterial property of the tissue paper was evaluated by disk diffusion method.

Solid waste is one of the biggest problem of civil society. In this project, agriculture waste from bagasse and banana fibers have been used to produce handmade paper. These fibers were collected, dried under the sun and passed through water vat to remove dust. Next, it is cooked with 10% caustic solution in pressure cooker and then blended in mixer for different timing. Diluted solution of Clorox was used for discoloration and purification of pulp.Three types of papers were made from ready pulp. First type was by made by using raw material only, second type by addition of 2% of CaCO3 and 2% of starch. And the third types by addition of 5% of both additives. These papers were dried and then ironed for straightening.GSM, pH, Thickness, Bulk, and Moisture Content were calculated for all types of papers. It was found that papers from bagasse fibers are heavy and suitable for heavy and rough usage. While paper from banana fibers are useful for soft usage like tissues, wipes, tracing paper etc. This project is ecofriendly as it used agricultural waste and only little electricity was used.

Wood is used as the major raw material in paper production around the world and this has resulted in severe deforestations having direct negative impact on our environment. This has led to the need of finding alternative raw materials for paper production. Mauritius has around 300 ha of land under pineapple cultivation resulting in agro-waste materials of the leaves. This paper aims at determining the feasibility of using pineapple leaf fibres for paper production. Samples of pineapple leaf fibre were mixed with cane-bagasse in different ratios namely, 20:80, 40:60, 60:40, 80:20,100:0. Pineapple leaf fibres were also mixed with wastepaper in the same ratios. Pulping of pineapple leaf was achieved through soda pulping at a concentration of 15%w/v for 90 min at 90 °C. The papers obtained were tested for their physical and mechanical properties. The average thickness of all the papers produced, ranged from 0.232 mm to 0.304 mm showing an increase in paper thickness with increasing grammage from 58.19 g/m2 to 63.3 g/m2. The most absorbent paper(1.19 s) was found to be the 100% pineapple which also demonstrated the highest Tensile Index and Burst Index (6.5 Nm/g and 0.84 kPa m2/g respectively). The bagasse and pineapple composite of ratio 40:60 was found to be the most abrasion resistant paper with 21 turns and a weight loss of 0.86% with the use of emery paper of grade zero as abradant and 200 g load cells. The most crease resistant paper was the wastepaper and pineapple composite of ratio 80:20 with a crease recovery angle of 59.8°.

In the present work, lignocellulosic micro/nanofibers (LCMNF) were produced from pine sawdust. For that, pine sawdust was submitted to alkali treatment and subsequent bleaching stages, tailoring its chemical composition with the purpose of obtaining effective LCMNF. The obtained LCMNF were characterized and incorporated to recycled cardboard boxes with the purpose of producing recycled paper. The obtained results showed that it was possible to obtain LCMNF with the same reinforcing potential than those cellulose nanofibers (CNF) prepared by oxidative or other chemical methods In fact, the obtained papers increased the breaking length of recycled cardboard from 3338 m to 5347 m, being a value significantly higher than the requirements to produce paper bags. Overall, the studied strategies could allow a significant reduction of paper basis weight, with the consequent material saving and, thus, contribution to the environment.

Activating flux is made up of inorganic material mixed with a volatile medium. The objective of this study is to identify and review the literature in activating flux, and different type of welding techniques. For that purpose, a structured review method is adopted and the Scopus database is used as a primary source for the selection of papers. The papers were identified using the string term of “Activating flux” OR “Activated flux” in the title of papers. And a total of 238 papers were identified for the study. Besides the above few other papers were also reviewed and the materials used, the type of flux used, and the findings of different combinations were highlighted in the form of tables. The findings of the study provide a comprehensive understanding of the different type of welding techniques focusing on TIG welding, and the different combination of flux used and their impact was summarized.

Cellulosic materials are widely used in daily life for paper products and clothing as well as for emerging applications in sustainable packaging and inexpensive medical diagnostics. Cellulose has a high density of hydroxyl groups that create strong intra- and interfiber hydrogen bonding. These abundant hydroxyl groups also make cellulose superhydrophilic. Schemes for hydrophobization and spatially selective hydrophobization of cellulosic materials can expand the application space for cellulose. Cellulose is often hydrophobized through wet chemistry surface modification methods. This work reports a new modification method using a combination of atomic layer deposition (ALD) and atmospheric heating to alter the wettability of purely cellulosic chromatography paper. We find that once the cellulosic paper is coated with a single ALD cycle (1cy-ALD) of Al2O3, it can be made sticky superhydrophobic after a 150 °C ambient post-ALD heating step. An X-ray photoelectron spectroscopy investigation reveals that the ALD-modified cellulosic surface becomes more susceptible to adsorption of adventitious carbon upon heating than an untreated cellulosic surface. This conclusion is further supported by the ability to use alternating air plasma and heat treatments to reversibly transition between the hydrophilic and hydrophobic states. We attribute the apparent abruptness of this wetting transition to a Cassie-Wenzel-like phenomenon, which is also consistent with the sticky hydrophobic wetting behavior. Using scanning probe methods, we show that the surfaces have roughness at multiple length scales. Using a Cassie-Wenzel model, we show how a small change in the surface's Young's contact angle-upon adsorption of adventitious carbon-can lead to an abrupt increase in hydrophobicity for surfaces with such roughnesses. Finally, we demonstrate the ability to spatially pattern the wettability on these 1cy-ALD-treated cellulosic papers via selective heating. This ALD-treated hydrophobic paper also shows promise for microliter droplet manipulation and patterned lab-on-paper devices.

The increasing pressure on natural resources and the climate has been noted by businesses and governments worldwide, who now face the difficult task of integrating paths of environmental sustainability and economic growth. One promising approach to sustainable development, reducing the pressure on natural resources and solving waste problems is circular economy. From different ways of implementing circular economy, this study focuses on the productization of industrial side streams, which carry a great deal of underutilized potential. In this article, the productization of pulp and paper industry side stream, fiber sludge, for commercial use as a dust-binding agent is studied via a descriptive, in-depth case study. Apart from inconsistent quality, fluctuating supply, cost of storage and logistics, what makes industrial side stream utilization challenging is the lack of knowledge that stakeholders have about side streams and their utilization and the lack of new value chain development for their commercial use. Therefore, it is essential for all parties involved to have a clearer vision of what is being sold for what purposes, through productization. This study found that the productization of side streams follows the same steps as the productization of any other traditional product, and the productized side streams can be added to the company&rsquo, s product portfolio as by-products.

Among the largest producers of waste, the paper industry stands out due to its impact on human health and ecological balance. However, these residues may also contribute to a more environmental friendly brick industry, since the incorporation of fluxing agents may improve the firing process and the induced porosity reduces thermal conductivity of fired bricks. Therefore, this study aims to assess the feasibility of replacing clay with solid paper residue (PPR) from 2.5 to 17.5% in order to reduce resources depletion and improve brick performance. The original clay was characterized as a non-calcareous red clay with high contents of kaolinite. Several samples were made by extrusion and fired at 900 °C in accordance with industrial procedures. The addition of PPR led to increase shrinkage from 5 to 10% due to the effect of fluxing oxides which reduced pores volume and enlarged pores size. In addition, the impervious fraction was slightly reduced while the apparent porosity certainly increased (i.e. approx. 17%) due to the macroscopic pores developed by PPR combustion. This porosity produces lighter bricks (i.e. density decays from 1.76 to 1.39 g dm−3) with lower thermal conductivity (i.e. from 5.53 to 0.41 W m−1 K−1) but also reduces compressive strength (i.e. from 11 to 3 MPa) and increases water absorption (i.e. up to 24%). Nevertheless, toxicity is below the regulatory limits in all cases and fired bricks are easily adaptable to industrial procedures. It must be noticed that this work was supported by the Chilean National Commission on Research and Development (CONICYT) [grant number FONDECYT REGULAR 1180414]. Technical and human support provided by CICT of Universidad de Jaén (UJA, MINECO, Junta de Andalucía, FEDER) and by Centro de Manejo de Residuos y Energía (BIOREN) Universidad de la Frontera (Chile) are gratefully acknowledged.

A novel, low-cost, and portable paper strip biosensor was developed for the detection of tetracycline antibiotics. Escherichia coli/pMTLacZ containing the tetracycline-mediated regulatory gene used as recognition elements with β-galactosidase as the reporter protein was designed and applied to cheap and portable Whatman filter paper as the carrier to prepare this paper strip biosensor. The detection process was optimized by using EDTA and polymyxin B as a sensitizer to improve the accuracy of detection for complicated matrices. The paper strip biosensor was suitable for tetracycline concentrations in the range of 75–10000 μg/L in water and 75–7500 μg/L in soil extracts. Detection limits of 5.23–17.1 μg/L for water and 5.21–35.3 μg/kg for the EDTA soil extracts were achieved at a response time of 90 min. The standard deviation (SD) of detected values by the biosensor paper strip compared to those determined by HPLC was between 13.4 and 59.6% for tetracycline and 2.01–33.5% for oxytetracycline in water and was between 6.22 and 72.8% for tetracycline and 5.90–43.4% for oxytetracycline in soil. This suggests that the paper strip biosensor was suitable for detecting both tetracycline and oxytetracycline in water, and could provide a suitable detection for extractable oxytetracycline in soils. Therefore, this biosensor provides a simple, economical, and portable piece of field kit for on-site monitoring of tetracyclines in a variety of environmental samples, such as pond water and agricultural soil that are susceptible to tetracycline pollution from feed additives and fertilization with livestock manure.

A novel method for electroosmotic flow (EOF) measurement on paper substrates is presented; it is based on dynamic mass measurements by simply using an analytical balance. This technique provides a more reliable alternative to other EOF measurement methods on porous media. The proposed method is used to increase the amount and quality of the available information about physical parameters that characterize fluid flow on microfluidic paper-based analytical devices (μPADs). Measurements were performed on some of the most frequently used materials for μPADs, i.e., Whatman #1 , S&S, and Muntktell 00A filter paper. Obtained experimental results are consistent with the few previously reported data, either experimental or numerical, characterizing EOF in paper substrates. Moreover, a thorough analysis is presented for the quantification of the different effects that affect the measurements such as Joule effect and evaporation. Experimental results enabled, for the first time, to establish well-defined electroosmotic characteristics for the three substrates in terms of the magnitude of EOF as funtion of pH, enabling researchers to make a rational choice of the substrate depending on the electrophoretic technique to be implemented. The measurement method can be described as robust, reliable, and affordable enough for being adopted by researchers and companies devoted to electrophoretic μPADs and related technologies.

The COVID-19 pandemic has highlighted the need for diversity in the market and alternative materials for personal protective equipment (PPE). Paper has high coatability for tunable barrier performance, and an agile production process, making it a potential substitute for polyolefin-derived PPE materials. Bleached and newsprint papers were laminated with polyethylene (PE) coatings of different thicknesses, and characterised for their potential use as medical gowns for healthcare workers and COVID-19 patients. Thicker PE lamination improved coating homogeneity and water vapour resistance. 49 GSM bleached paper with 16 GSM PE coating showed high tensile and seam strength, and low water vapour transmission rate (WVTR). Phi-X174 bacteriophage testing revealed that paper laminated with 15 GSM coating hinders virus penetration. This research demonstrates that PE laminated paper is a promising material for low cost viral protective gowns., Graphical abstract Image 1

Bisphenol A (BPA) and its halogenated analogs tetrabromobisphenol A (TBBPA) and tetrachlorobisphenol A (TCBPA) are common environmental contaminants and a method for their simultaneous determination is urgently needed. A paper-based analytical device (PAD) was prepared using a metal-organic framework of UiO-66-NH2 coated with molecularly imprinted polymers (MIPs) using TBBPA as a template. The maximum adsorption capacity was 120.94 mg g−1 and the imprinting factor was 4.07. The selective recognition ability of this PAD enabled the effective separation of TBBPA, TCBPA and BPA based on paper chromatography. Subsequently, the PAD cut into segments were used individually to determine the presence of target chemicals using a highly sensitive fluorescent method. Under ultraviolet light irradiation, UiO-66-NH2 acts as a photocatalyst to produce reactive oxygen species (ROS) that degrade TBBPA, TCBPA or BPA in the imprinted cavities and the fluorescent signal of 2′,7′-dichlorodihydrofluorescein diacetate (H2DCFDA) added as a ROS probe enabled the indirect determination of target chemicals. This method could determine BPA and its halogenated analogs in dust samples simultaneously with detection limits ranging from 0.14 to 0.30 ng g−1. The intraday relative standard deviation (RSD) was ≤6.8% and interday RSD was ≤8.1%. The recoveries ranged from 91.0 to 105.6% with RSD values that were ≤7.5%. The results stemmed from this method were consistent with those obtained from LC-MS/MS. It is an environmentally-friendly approach due to the degradation of target pollutants and possesses many advantages such as high selectivity, low cost and easy-to-fabrication.

A rapid, highly sensitive, and quantitative colorimetric paper-based analytical device (PAD) based on silver nanoplates (AgNPls) and loop-mediated isothermal amplification (LAMP) is presented. It is shown that cauliflower-like concatemer LAMP products can mediate crystal etching of AgNPls, with a threefold signal enhancement versus linear dsDNA. Methicillin-resistant Staphylococcus aureus (MRSA), an antimicrobial resistant bacterium that poses a formidable risk with persistently high mortality, is used as a model pathogen. Due to the excellent color contrast provided by AgNPls, the PAD allows qualitative analysis by the naked eye and quantitative analysis using a smartphone camera, with detection limits down to a single copy in just 30 min, and a linear response from 1 to 104 copies (R2 = 0.994). The entire assay runs in situ on the paper surface, which drastically simplifies operation of the device. This is the first demonstration of single copy detection using a colorimetric readout, and the developed PAD shows great promise for translation into an ultrasensitive gene-based point-of-care test for any infectious disease target, via modification of the LAMP primer set.

One of the main problems faced by libraries, archives and collectors is the mold degradation of the paper-based documents, books, artworks etc. Microfungi (molds) emerge in regular storage conditions of such items (humidity, usually over 50%, and temperatures under 21 °C). If the removal of the visible mycelium is relatively easy, there is always the problem of the subsequent appearance of mold as the spores remain trapped in the cellulosic, fibrillary texture, which acts as a net. Moreover, due to improper hand hygiene bacteria contamination, old books could represent a source of biohazard, being colonized with human pathogens. An easy and accessible method of decontamination, which could offer long term protection is therefore needed. Here, we present a facile use of the ZnO nanopowders as antimicrobial agents, suitable for cellulose-based products, conferring an extended antibacterial and anti-microfungal effect. The proposed method does not adversely impact on the quality of the cellulose documents and could be efficiently used for biodegradation protection.

Hybrid nanomaterials fabricated by the heterogeneous integration of 1D (carbon nanotubes) and 2D (graphene oxide) nanomaterials showed synergy in electrical and mechanical properties. Here, we reported the infiltration of carboxylic functionalized single-walled carbon nanotubes (C-SWNT) into free-standing graphene oxide (GO) paper for better electrical and mechanical properties than native GO. The stacking arrangement of GO sheets and its alteration in the presence of C-SWNT were comprehensively explored through scanning electron microscopy, X-ray photoelectron spectroscopy (XPS) and X-ray diffraction. The C-SWNTs bridges between different GO sheets produce a pathway for the flow of electrical charges and provide a tougher hybrid system. The nanoscopic surface potential map reveals a higher work function of the individual functionalised SWNTs than surrounded GO sheets showing efficient charge exchange. We observed the enhanced conductivity up to 50 times and capacitance up to 3.5 times of the hybrid structure than the GO-paper. The laminate of polystyrene composites provided higher elastic modulus and mechanical strength when hybrid paper is used, thus paving the way for the exploitation of hybrid filler formulation in designing polymer composites.

Paper recycling is the process of turning waste paper into new paper products. The main objective of the current research work is to analyze the effectiveness of stainless steel based compact paper recycling machines for small scale industries and institutions such as schools, colleges, printing media, etc. At present paper recycling technology is being implemented in large scale industries as it requires enormous space and cost involved. In the current study, an attempt is made to design a compact recycling machine that is affordable for small scale industries and institutions to possess their paper recycling units. The mechanism comprises of hydro pulper, mould box, conveyors, rollers, and driers. It is capable of recycling the used papers and produce papers, cardboards, and egg trays. The thickness of the paper is controlled by setting the distance between the two finishing rollers using a spring set up. The process of recycling is broadly divided into three main categories that include collection of waste, manufacturing of new products, and purchasing. The main advantage of the machine is waste paper be converted into a useful product and thus reduce deforestation. The cost of recycling is reduced and is affordable by small industries. The simplicity of the operation of this machine ensures that a high level of technical skill is not essential for the process. The durability of the machine is high provided if adequately maintained. Since recycling is good for the environment, and if more and more people make use of it, it will address the problem of global warming.

The objective of this paper is to study the deterioration of impregnated kraft papers immersed in dielectric liquids under the chemical stress conditions by furan analysis according to ASTM D5837 and IEC 61198. Mineral oil and natural ester (FR3) were liquid used in this study. Kraft paper samples, 3 pieces per each case study, are prepared in rectangle shape with 25.4 ± 0.5 millimeters (1.00 ± 0.02 inches) wide and approximately 254 millimeters (10.0 inches) long according to the ASTM D828 standard. The paper and liquid insulation are heated to dehydrate at 80 °C for 12 hours with 200 mbar pressure, and then they are filled in 200 milliliter bottles and heated with 5 different temperatures being 60 °C, 80 °C, 100 °C, 120 °C and 140 °C respectively. In the case of 120 °C and 140 °C are only conducted with FR3 due to its thermal characteristics. After that, 98% concentration of acetic acid of 2 quantities, 0.04 and 0.08 milliliters, and oxygen (O2) at 1 psi for 1,200 ml, are used for the chemical aging process for 9 days of the test samples before being tested to find furanic compounds. According to the test result, it can be concluded that all 4 factors, temperature, acetic volume, oxygen and moisture, effect on generated furanic compounds of aging paper insulation.

A colorimetric paper-based sensor is proposed for the rapid monitoring of six major organophosphate and carbamate pesticides. The assay was constructed by dropping gold and silver nanoparticles on the hydrophilic zones of a paper substrate. The nanoparticles were modified by L-arginine, quercetin, and polyglutamic acid. The mechanism of sensing is based on the interaction between the pesticide and the nanoparticles. The color of nanoparticles changed during the interactions. A digital camera recorded these changes. The assay provided a unique response for each studied pesticide. This method can determine six individual pesticides including carbaryl, paraoxon, parathion, malathion, diazinon, and chlorpyrifos. The limit of detection for these pesticides were 29.0, 22.0, 32.0, 17.0, 45.0, and 36.0 ng mL−1, respectively. The assay was applied to simultaneously determine the six studied pesticides in a mixture using the partial least square method (PLS). The root mean square errors of prediction were 11, 8.7, 9.2, 10, 12, and 11 for carbaryl, paraoxon, parathion, malathion, diazinon, and chlorpyrifos, respectively. The paper-based device can differentiate two types of studied pesticide (organophosphate and carbamate) as well as two types of organophosphate structures (oxon and thion). Furthermore, this sensor showed high selectivity to the pesticides in the presence of other potential species (e.g., metal ions, anions, amino acids, sugar, and vitamins). This assay is capable of determining the pesticide compounds in tap water, apple juice, and rice samples. Graphical abstract

Tumor tropism metastasis is a multi-step process that involves interactions between tumor cells and the microenvironment. Due to the limitations of experimental techniques, current studies are not able to gain insight into the dynamic process of such tropism migration. To overcome this issue, we developed a paper-supported co-culture system for dynamic investigations of the lung-tropic migration of breast cancer cells. This co-culture system contains a tumor layer, a recruitment layer, and several invasion layers between these two parts. The tumor and recruitment layers are impregnated with breast cancer cells and lung cells, respectively. Stacking these layers forms a co-culture device that comprises interactions between breast cancer and lung, destacking such a device represents cancer cells at different stages of the migration process. Thus, the paper-supported co-culture system offers the possibility of investigating migration from temporal and spatial aspects. Invasion assays using the co-culture system showed that breast cancer cells induced lung fibroblasts to convert to cancer-associated fibroblasts (CAFs), and the CAFs, in turn, recruited breast cancer cells. During migration, the local invasion of the cancer cells is a collective behavior, while the long-distance migration comes from individual cell behaviors. Breast cancer cells experienced repetitive processes of migration and propagation, accompanied by epithelial–mesenchymal and mesenchymal–epithelial transitions, and changes in stemness and drug resistance. Based on these results, the lung-tropic migration of breast cancer is interpreted as a process of bilateral interaction with the local and host-organ microenvironment. The developed paper-supported co-culture system offers the possibility of dynamically investigating tropism migration under the pre-metastatic niche, thus providing an advantageous tool for studying tumor metastasis.

In power transformers in which is dominated the oil-paper insulation system, it is the effort to use innovative insulating materials to achieve greater quality, reliability and longer service life of the transformer. In this paper, we present the results of research into the insulating properties of an oil-paper insulation system in a DC and AC electric field. In the experiments MOL TO 40A transformer oil and two types of paper used in transformers, KREMPEL DPP and insulating paper used in BEZ transformers, were used. The results from the experiments show that KREMPEL insulating paper has a higher electrical strength and the electrical strength of both oil-impregnated insulating papers is greater when applying DC voltage.

The assessment of the aging condition is becoming increasingly important for operators of high voltage assets. Power transformers are especially one of the most important units in the electrical power grid. Due to the fact that oil-paper insulation is still the most economical form of insulation, and is therefore found in the majority of transformers, the condition assessment of the paper insulation is decisive for estimating the remaining service life. Since the determination of the condition via furans is associated with certain fluctuations, several other aging parameters are investigated. Therefore, this study intends to determine how those aging markers of the insulating liquid behave in the absence of insulating paper and how the values change with insulating paper; thus, from the difference between important parameters, indicating the paper aging might be possible. For the investigation, a non-inhibited and an inhibited insulating oil as well as a further inhibited oil with a different composition, are tested as the most common insulating liquids. For this purpose, an open system is reproduced, which has permanent contact with the environment air. Accordingly, the study is carried out for long-term thermal stress to obtain samples with a wide spectrum of aging status. The entire study extended over a period of 14–15 weeks at a temperature of 130 °C with performing the measurements of the parameters at various aging times. The study reveals that the results can be used for an improved condition assessment of transformers.

In this study, the performance of manganese oxide nanorods/reduced graphene oxide (MnOx/rGO) composite papers as anode for lithium-ion battery is investigated. The self-supporting and flexible composite papers are fabricated via traditional vacuum filtration. The crystal structure, chemical state and morphology are determined by XRD, XPS and SEM, respectively. And the electrochemical performance is measured by means of cyclic voltammetry (CV) and galvanostatic charge/discharge (GCD) techniques. It is proved that the MnOx/rGO papers exhibit layer-by-layer structure in which rod-shaped MnOx is sandwiched among the rGO sheets. As anode for lithium-ion batteries, the capacity of MnOx/rGO paper can be stabilized at 518 mAh g−1 for 1500 charge/discharge cycles.

Poly(3,4-ethylenedioxythiophene) doped with the polymer anion poly(styrenesulfonate), PEDOT:PSS, is a common electrochromic material used in the preparation of electrochromic devices (ECDs). In this paper, the PEDOT:PSS doped with a solvent was used both as the electrode and the electrochromic functional layer for fabrication of ECDs on absorptive paper surfaces. The doped PEDOT:PSS dispersion was assessed for the film-forming evenness, sheet resistance and conductivity, and the performance of prepared ECDs for their color contrast and switching dynamics. The ECD performance is discussed in relation to the absorptive characteristics of the substrates. The results indicate that it is feasible to prepare ECDs onto absorptive substrates, despite the partial polymer material imbibition into them. The extent of polymer absorption influences the ECD performance: an increased absorption reduces the color contrast but speeds up the color switching. The electrochemical properties of the used solid electrolyte were found to be crucial for functioning of the ECDs. Insufficient ion transport and associated high resistance led to failure of the devices.

This study introduces an applicable colorimetric sensor array for the detection of pesticides in the vapor phase. The array consisted of six metal nanoparticles spotted on the piece of filter paper. 3D-origami pattern was used for the fabrication of a paper-based sensor to decrease the effect of the nanoparticles leaching after exposure to analytes. Exposure to pesticide aerosols caused changes in the color of the array due to the aggregation of nanoparticles. These changes provided selective responses to thion pesticides such as malathion, parathion, chlorpyrifos, and diazinon. The sensing assay could also differentiate between aliphatic and aromatic thions and discriminate amine-containing compounds from the other studied analytes. These finding results are clearly confirmed by both visual detection and multivariate statistical methods. The proposed sensor was successfully developed for the quantitative measurement of pesticide aerosols at a very low concentration. The limit of detection of this method determined for malathion, parathion, chlorpyrifos and diazinon were 58.0, 103.0, 81.0 and 117.0, respectively. Moreover, the array could be employed to simultaneously analyze four studied pesticides. The statistcal results confirmed that the method has high performance for concurrent detection of thions as a major air pollutant without the interference of other species.

In this work, we describe an eco-friendly and cost-efficient method for the production of highly dispersed few-layer graphene solution using karaya gum as bio-inspired exfoliating agent. The as-synthesized graphene aqueous solution can be easily applied on paper sheet through dip- or brush-coating thanks to the binding properties of the gum and to the functional groups on the paper surface with the graphene sheets. The as-synthesized composites display high mechanical strength and high electrical conductivity for numerous downstream applications. Electronic circuits can be designed on such graphene-paper composites either by controlling the graphene deposit or by post-laser etching with high lateral resolution. The laser beam can also be used to create local graphitization or partial etching of the conductive line in order to generate conductive areas with different resistance. The designed smart graphene paper was experimentally tested in different electronic applications, such as lightweight conductive circuit, as well as flexible keyboard which can be directly linked to a computer, thus opening up a new route for the development of daily life connected objects.

β-Agonists are illegal feed additives in the feed industries of many countries, especially China. Here, we report a microfluidic paper-based analytical device (μPAD) coupled with the chemiluminescence (CL) method to provide the sensitive, simple and rapid quantitative detection of β-agonists in swine hair samples. In this study, we found that the β-agonists diminished the CL generated by the reaction of K3[Fe(CN)6] and luminol on μPAD, which was different from that observed in the aqueous solution, and the degree of diminishment was proportional to the concentration of β-agonists. The possible mechanism was discussed as well. Also, this detection method showed a wide linear range (from 4.0 × 10-8 to 1.0 × 10-5 mol L-1) and low limit of detection (2.0 × 10-8 mol L-1) with a low consumption of samples and reagents. Satisfactory recovery values (from 78% to 95%) were achieved. Therefore, our μPAD CL sensor will be favorable to develop a miniaturized instrument for the on-site analysis of β-agonists in swine hair samples.

This paper presents a novel, low cost flexible paper substrate suitable for biosensing applications. A microstrip patch antenna consisting of copper tape foil and a cellulose filter paper as a substrate with thickness of 180 μm is fabricated and tested. The substrate has measured dielectric constant (e r ) of 1.9 and losses (tan δ ) of 0.025. For 3.8 GHz resonance, the antenna has size of 29.5 mm x 38 mm on a ground plane of 50 mm x 60 mm. Measurements of the final design are in excellent agreement with simulations. Moreover, measurements of the patch antenna on the proposed substrate (cellulose filter paper) collected at different bending radii and folding angles demonstrate performance consistency.

Methanol in oil can be used to evaluate the aging status of oil-paper insulation system of power transformers. Many scholars have shown that the production of methanol in oil is closely related to the degradation of paper. However, the methanol distributed in oil is affected by the oil-paper adsorption equilibrium. In this paper, the equilibrium distribution of methanol between oil and paper at different temperatures were investigated. The equilibrium experiments were conducted by soaking methanol-oil standard solution with ordinary Kraft paper at 20°C, 45°C and 60°C respectively. The results showed that temperature obviously affects the adsorption capacity of oil and paper for methanol: with the increase of temperature, the equilibrium time of methanol between oil and paper is accelerated. Within a certain temperature range, the adsorption capacity of paper for methanol will decrease with the increase of temperature. However, when the temperature was near the boiling point of methanol, the content of methanol in oil declined, which might be related to the existence of gaseous methanol at high temperature. At this time, the equilibrium distribution model of methanol changed from the two-phase model of oil-paper system to the three-phase model of oil-paper-gas system.

Halide perovskite quantum dots (PQDs) are promising materials for diverse applications including displays, light‐emitting diodes, and solar cells due to their intriguing properties such as tunable bandgap, high photoluminescence quantum yield, high absorbance, and narrow emission peaks. Despite the prosperous achievements over the past several years, PQDs face severe challenges in terms of stability under different circumstances. Currently, researchers have overcome part of the stability problem, making PQDs sustainable in water, oxygen, and polar solvents for long‐term use. However, halide PQDs are easily degraded under continuous irradiation, which significantly limits their potential for conventional applications. In this study, an oleic acid/oleylamine (traditional surface ligands)‐free method to fabricate perovskite quantum dot papers (PQDP) is developed by adding cellulose nanocrystals as long‐chain binding ligands that stabilize the PQD structure. As a result, the relative photoluminescence intensity of PQDP remains over ≈90% under continuous ultraviolet (UV, 16 W) irradiation for 2 months, showing negligible photodegradation. This proposed method paves the way for the fabrication of ultrastable PQDs and the future development of related applications., Solid‐state perovskite quantum dot papers are fabricated using a unique vacuum filtration growth method without a purification process. The bonding between cellulose nanocrystals and perovskite quantum dots makes the hybrid structure stable, and record high UV stability and thermal stability are achieved for perovskite quantum dot papers.

Due to the recent pandemic of coronavirus, known as the COVID-19 outbreak, the supply chains have been impacted most significantly. Manufacturers of certain items have experienced a substantial increase in demand, and on the other hand, raw materials supply, to produce those items, has reduced because of supply failure. To overcome these challenges, this paper proposes some strategies to improve service level during an extraordinary pandemic outbreak, such as COVID-19, for the most wanted products such as toilet paper. This study considers meeting the increased demand of the customers for an essential product of daily life like toilet paper during a pandemic is beyond the traditional economic objective, i.e., increase profit, of the manufacturers. Instead, this should be more about the social responsibility of all the manufactures to ensure that they can serve more customers. Motivated by this and taking toilet paper as an example of the product, we first analyzed the current scenario of the manufacturing and the demand for the product and then proposed some strategies to deal with this unprecedented risk and analyzed the results. We have compared the results, using hypothetical data, between the current scenario and proposed strategies. The result shows that sharing information and resources from all manufacturers to produce under a single brand, emergency sourcing, producing basic quality items, and packing in the smallest sizes have a significant positive impact on the service level. This paper first investigates the strategies for a high-demand and essential item during a pandemic situation and proposes strategies to deal with this unique, extraordinary disruption.

We report a paper-based electrochemical immunosensor made with sustainable materials to detect aflatoxin B1 (AFB1), a highly toxic, carcinogenic mycotoxin found in food. The immunosensor was prepared with a waterproof paper substrate and low-cost graphite-based conductive ink through a simple cut-printing method. The working electrode was functionalized with a drop-cast film of multiwalled carbon nanotubes (MWCNT)/chitosan on which a layer of anti-AFB1 monoclonal antibodies was immobilized covalently. The architecture of the immunosensor was confirmed with polarization-modulated infrared reflection absorption spectroscopy (PM-IRRAS) and electrochemical impedance spectroscopy (EIS), including the effective immobilization of the active layer of anti-AFB1. With EIS as the principle of detection, the immunosensor could detect AFB1 in the range from 1 to 30 ng&middot, mL&minus, 1, and detection limit of 0.62 ng&middot, 1. This sensitivity is sufficient to detect AFB1 in food according to regulatory agencies. The immunosensor exhibited good repeatability, reproducibility, stability, and selectivity in experiments with a possible interferent. Furthermore, detection of AFB1 in maize flour samples yielded recovery of 97&ndash, 99%, in a demonstration of the possible use of the paper-based immunosensor to detect AFB1 using extraction solutions from food samples.

In this study, the effects of the mixing conditions of waste paper sludge ash (WPSA) on the strength and bearing capacity of controlled low-strength material (CLSM) were evaluated, and the optimal mixing conditions were used to evaluate the strength characteristics of CLSM with recyclable WPSA. The strength and bearing capacity of CLSM with WPSA were evaluated using unconfined compressive strength tests and plate bearing tests, respectively. The unconfined compressive strength test results show that the optimal mixing conditions for securing 0.8&ndash, 1.2 MPa of target strength under 5% of cement content conditions can be obtained when both WPSA and fly ash are used. This is because WPSA and fly ash, which act as binders, have a significant impact on overall strength when the cement content is low. The bearing capacity of weathered soil increased from 550 to 575 kPa over time, and CLSM with WPSA increased significantly, from 560 to 730 kPa. This means that the bearing capacity of CLSM with WPSA was 2.0% higher than that of weathered soil immediately after construction, furthermore, it was 27% higher at 60 days of age. In addition, the allowable bearing capacity of CLSM corresponding to the optimal mixing conditions was evaluated, and it was found that this value increased by 30.4% until 60 days of age. This increase rate was 6.7 times larger than that of weathered soil (4.5%). Therefore, based on the allowable bearing capacity calculation results, CLSM with WPSA was applied as a sewage pipe backfill material. It was found that CLSM with WPSA performed better as backfill and was more stable than soil immediately after construction. The results of this study confirm that CLSM with WPSA can be utilized as sewage pipe backfill material.

This paper presents a set of modeling procedures which are substantial for developing a data-driven soft sensor for paper strength parameters in production environment. Special focus is put on describing methods for efficient data aggregation, data cleaning and feature selection, which were employed to appropriately model the inherently complex process of papermaking and handle the challenging nature of collected data. The resulting soft sensor for tensile index deployed at a paper machine shows solid performance. Moreover, good quality of calculated real-time predictions is also confirmed by means of experiment-based validation.

The Phenylketonuria (PKU) is an inborn defect of phenylalanine (Phe) metabolism, in which Phe accumulated in the blood causing alterations at the central nervous system. Therefore, the detection of PKU is very important for the early diagnosis of PKU patients. However, existing tests for PKU are time-consuming and require high-resource laboratories. In this study, a novel paper-based biosensor based on phenylalnine ammonia lyase (PAL) hybrid nanoflowers was constructed that provides a semi-quantitative output of the concentration of Phe from urine samples. PAL@Ca3(PO4)2 hybrid nanoflowers (PAL@NF) were first prepared using PAL and Ca2+. Synthesis conditions of the PAL@NF on the formation of the PAL@NF were optimized. The PAL@NF exhibited 90% activity recovery under optimal condition. Compared with free PAL, the PAL@NF displayed good storage stability and increased tolerance to proteolysis. After five consecutive operating cycles, the PAL@NF still retained 73% of its initial activity, indicating excellent reusability. Furthermore, the paper-based biosensor was able to detect Phe concentration in urine samples, and exhibited good linearity to the Phe concentrations in the range from 60 to 2400 μM and the response time was only about 10 min. Therefore, the paper-based biosensor can be a promising candidate as a biosensor for the detection of PKU.

This paper presents the effect of the impact of moisture in paper insulation used as insulation of transformer windings on its thermal conductivity. Various types of paper (cellulose and aramid) and impregnated (mineral oil, synthetic ester, and natural ester) were tested. The impact of paper and impregnated types on the changes in thermal conductivity of paper insulation caused by an increase in moisture were analyzed. A linear equation, describing the changes in thermal conductivity due to moisture, for various types of paper and impregnated, was developed. The results of measuring the thermal conductivity of paper insulation depending on the temperature are presented. The aim of the study is to develop an experimental database to better understand the heat transport inside transformers to assess aging and optimize their performance.

Caffeine naturally occurs in tea and cocoa, which is also used as an additive in beverages and has pharmacological effects such as refreshing, antidepressant, and digestion promotion, but excessive caffeine can cause harm to the human body. In this work, based on the specific response between nano zinc 5, 10, 15, 20-tetra(4-pyridyl)-21H-23H-porphine (nano ZnTPyP)-CdTe quantum dots (QDs) and caffeine, combined with chemometrics, a visual paper-based sensor was constructed for rapid and on-site detection of caffeine. The fluorescence of QDs can be quenched by nano ZnTPyP. When caffeine is added to the system, it can pull nano ZnTPyP off the surface of the QDs to achieve fluorescence recovery through electrostatic attraction and nitrogen/zinc coordination. The detection range is 5 × 10−11~3 × 10−9 mol L−1, and the detection limit is 1.53 × 10−11 mol L−1 (R2 = 0.9990) (S/N = 3). The paper-based sensor constructed exhibits good results in real samples, such as tea water, cell culture fluid, newborn bovine serum, and human plasma. Therefore, the sensor is expected to be applied to the rapid instrument-free detection of caffeine in food and biological samples. Graphical abstract

Enabled by the coffee-ring effect, a paper-based signal transduce method is employed for catalytic hairpin assembly (CHA) amplification and hybridization chain reaction (HCR) to achieve miRNA quantification. Once the target miRNAs appeared, it was circularly used by CHA to initiate HCR amplification to produce a large number of G-quadruplex, which is combined with hemin to form a hemin/G-quadruplex DNAzyme. The DNAzyme catalyzes a colorimetric reaction to produce colored nanoparticles, which were converted to the end edge of the paper by evaporation-driven flow, forming a visible colored band. Higher concentration of miRNA led to more colored nanoparticles and thus a longer colored band that can simply be measured by a ruler. The results of determination of miRNA in samples demonstrate that the relative standard deviation of the proposed approach is 5.2%, highly sensitive and repeatable, with a working range 1.0 to 1000 pM and a LOD of 0.2 pM. The paper-based analytical device as a novel platform offers a new signal transduce pathway toward the detection of low-abundance biomarkers for diagnosis.Graphical abstract Schematic representation of the principle for quantification of miRNA on paper based on the coffee-ring effect.