Search

Today, we are witnessing an increasing trend in the number of soft pneumatic actuator solutions in industrial environments, especially due to their human-safe interaction capabilities. An interesting solution in this frame is a vacuum pneumatic muscle actuator (PMA) with a bellow structure, which is characterized by a high contraction ratio and the ability to generate high forces considering its relatively small dimensions. Moreover, such a solution is generally very cost-effective since can be developed by using easily accessible, off-the-shelf components combined with additive manufacturing procedures. The presented research analyzes the precision positioning performances of a newly developed cost-effective bellow PMA in a closed-loop setting, by utilizing a Proportional-Integral-Derivative (PID) controller and a Linear Quadratic Regulator (LQR). In a first instance, the system identification was performed and a numerical model of the PMA was developed. It was experimentally shown that the actuator is characterized by nonlinear dynamical behavior. Based on the numerical model, a PID controller was developed as a benchmark. In the next phase, an LQR that involves a nonlinear pregain term was built. The point-to-point positioning experimental results showed that both controllers allow fast responses without overshoot within the whole working range. On the other hand, it was discovered that the LQR with the corresponding nonlinear pregain term allows an error of a few tens of micrometers to be achieved across the entire working range of the muscle. Additionally, two different experimental pneumatic solutions for indirect and direct vacuum control were analyzed with the aim of investigating the PMA response time and comparing their energy consumption. This research contributes to the future development of the pneumatically driven mechatronics systems used for precise position control. [ABSTRACT FROM AUTHOR]

Soft pneumatic actuators offer great advantages compared to rigid ones, particularly due to their compliant nature, which allows them to adapt to uncertainties in the environment. As such, they enable human-safe interactions and are often applied to various applications, such as for example, soft grippers or wearable devices for human motion assistance. The presented research describes the process of design, development and finally control of two cost-effective bellow pneumatic actuators. The properties of the developed devices are experimentally assessed by performing three different types of experiments. In a first instance, the testing of blocking force was performed, followed by experimental assessment of velocity-displacement characteristics, and finally, the dynamical properties for sinusoidally forced motion were examined. It was shown that the actuator can provide over 100 N force and assure a contraction ratio over 40% of its full length, with maximum velocity exceeding 60 mm/s. Experimental responses to a sinusoidally forced motion allowed establishing that no significant change due to the fatigue, creep and relaxation occur in material properties. Finally, the positioning performances of both developed devices were assessed by employing PID and LQR controllers which allowed their precise position control with fast responses and steady-state errors within the 0.2 mm margin. The performed research gives some insights into the future development of the pneumatically driven mechatronics systems used for position control. [ABSTRACT FROM AUTHOR]

Today, we are witnessing an increasing trend in the number of soft pneumatic actuator solutions in industrial environments, especially due to their human-safe interaction capabilities. An interesting solution in this frame is a vacuum pneumatic muscle actuator (PMA) with a bellow structure, which is characterized by a high contraction ratio and the ability to generate high forces considering its relatively small dimensions. Moreover, such a solution is generally very cost-effective since can be developed by using easily accessible, off-the-shelf components combined with additive manufacturing procedures. The presented research analyzes the precision positioning performances of a newly developed cost-effective bellow PMA in a closed-loop setting, by utilizing a Proportional-Integral-Derivative (PID) controller and a Linear Quadratic Regulator (LQR). In a first instance, the system identification was performed and a numerical model of the PMA was developed. It was experimentally shown that the actuator is characterized by nonlinear dynamical behavior. Based on the numerical model, a PID controller was developed as a benchmark. In the next phase, an LQR that involves a nonlinear pregain term was built. The point-to-point positioning experimental results showed that both controllers allow fast responses without overshoot within the whole working range. On the other hand, it was discovered that the LQR with the corresponding nonlinear pregain term allows an error of a few tens of micrometers to be achieved across the entire working range of the muscle. Additionally, two different experimental pneumatic solutions for indirect and direct vacuum control were analyzed with the aim of investigating the PMA response time and comparing their energy consumption. This research contributes to the future development of the pneumatically driven mechatronics systems used for precise position control.

Soft pneumatic actuators offer great advantages compared to rigid ones, particularly due to their compliant nature, which allows them to adapt to uncertainties in the environment. As such, they enable human-safe interactions and are often applied to various applications, such as for example, soft grippers or wearable devices for human motion assistance. The presented research describes the process of design, development and finally control of two cost-effective bellow pneumatic actuators. The properties of the developed devices are experimentally assessed by performing three different types of experiments. In a first instance, the testing of blocking force was performed, followed by experimental assessment of velocity-displacement characteristics, and finally, the dynamical properties for sinusoidally forced motion were examined. It was shown that the actuator can provide over 100 N force and assure a contraction ratio over 40% of its full length, with maximum velocity exceeding 60 mm/s. Experimental responses to a sinusoidally forced motion allowed establishing that no significant change due to the fatigue, creep and relaxation occur in material properties. Finally, the positioning performances of both developed devices were assessed by employing PID and LQR controllers which allowed their precise position control with fast responses and steady-state errors within the 0.2 mm margin. The performed research gives some insights into the future development of the pneumatically driven mechatronics systems used for position control.