Search

Conventional quantitative diffusion-weighted imaging (DWI) is sensitive to changes in tissue microstructure, but its application to evaluating patients with orthopaedic hardware has generally been limited due to metallic susceptibility artifacts. The apparent diffusion coefficient (ADC) and TCoronal morphologic MRIs from THA patients underwent evaluation of the synovium and were assigned a synovial classification of 'normal', or 'grouped abnormal' (consisting of sub-groups 'infection', 'polymeric', 'metallosis', 'adverse local tissue reaction' [ALTR], or 'non-specific') and type of synovial reaction present (fluid-like, solid-like, or mixed). Regions of interest (ROIs) were placed in synovial reactions for measurement of ADC and TDifferences of ADC and T2D-MSI PROPELLER DWI and MAVRIC-T

Background Because loosening of total knee arthroplasty (TKA) occurs due to poor osseous integration at component-bone interfaces, interface assessment may be helpful in diagnosing loosening at MRI. Purpose To determine interreader reproducibility for characterizing component interfaces and diagnosing loosening and to evaluate the diagnostic performance of MRI for diagnosing loosening after TKA compared with radiography. Materials and Methods Consecutive knees with TKA that underwent revision between July 2018 and June 2019 and were imaged at MRI and radiography were included in this retrospective study. Interface type (normal, fibrous membrane, fluid, or osteolysis), percent integration (33%, 33%-66%, or66%), and presence of bone marrow edema pattern were assessed. Loosening was diagnosed at MRI if no or almost no normal interface was present. Sensitivity and specificity were compared with radiographs by using surgical findings as reference. Gwet agreement coefficient evaluated interreader reproducibility between two readers and multivariable logistic regression assessed risk factors for loosening. Results Among 116 knees in 114 patients (mean age, 63 years ± 10 [SD]; 59 women), 61 of 116 knees (52.6%) had at least one loose component. Interreader reproducibility of MRI was substantial to excellent (Gwet agreement coefficient, 0.67-0.96). Loosening was associated with fluid interface (odds ratio [OR], 20.1; 95% CI: 5.7, 70.9) or osteolysis (OR, 3.1; 95% CI: 1.8, 5.3), absence of any normal interface (OR, 11.8; 95% CI: 6.3, 22.2), poor (33%) osseous integration (OR, 20.4; 95% CI: 9.7, 42.6), and bone marrow edema pattern (OR, 4.7; 95% CI: 2.8, 7.8). Sensitivity and specificity of MRI for loosening were 84% (27 of 32; 95% CI: 72, 97) and 85% (71 of 84; 95% CI: 77, 92) for the patellar, 31% (eight of 26; 95% CI: 13, 49) and 100% (90 of 90; 95% CI: 100, 100) for the femoral, and 81% (22 of 27; 95% CI: 66, 96) and 98% (87 of 89; 95% CI: 95, 100) for the tibial component, respectively. MRI had higher sensitivity (84% vs 31%

Mobile bearing designs are intended to reduce wear, but mixed results were reported from retrieval analyses. Postmortem evaluation (PM) provides the opportunity to assess polyethylene damage in successful implants. We compared damage patterns, MRI presentation, and histology between mobile-bearing and fixed tibial inserts retrieved postmortem and compared these results to our prior findings from implants retrieved at revision.Eleven postmortem knees with rotating platform (RP) implants and 13 with fixed bearing (FB) implants were examined. All were MRI scanned, and tissue samples were collected from standardized regions for histology. Polyethylene inserts were subjectively scored to assess articular, backside, and PS post surfaces for damage modes and severity.Average duration of implantation was 9.3 years (1.7-19.6 years). Surface burnishing was the most common polyethylene damage mode. Average damage scores were higher for RP (53.4) compared to FB inserts (34.4) due to greater backside damage (13.4 for RP vs 1.4 for FB). A minimal difference in damage was observed on the articular surfaces (37.4 RP vs 30.0 FB). Mild innate macrophage reactions were seen in 8 (72.7%) RP and 5 (45.5%) FB specimens. Polyethylene particles were identified in 7 (63.6%) RP and 3 (27.7%) FB specimens.Postmortem inserts showed low damage levels and mild tissue reactions compared to those reported for implants removed at revision arthroplasty. Nonetheless, trends in comparing RP and FB inserts were consistent with those seen in retrieval analyses, demonstrating the usefulness of retrieval studies in capturing performance differences among TKA designs.

ContextMany individuals at high risk for fracture are never evaluated for osteoporosis and subsequently do not receive necessary treatment. Utilization of magnetic resonance imaging (MRI) is burgeoning, providing an ideal opportunity to use MRI to identify individuals with skeletal deficits. We previously reported that MRI-based bone texture was more heterogeneous in postmenopausal women with a history of fracture compared to controls.ObjectiveThe present study aimed to identify the microstructural characteristics that underlie trabecular texture features.MethodsIn a prospective cohort, we measured spine volumetric bone mineral density (vBMD) by quantitative computed tomography (QCT), peripheral vBMD and microarchitecture by high-resolution peripheral QCT (HRpQCT), and areal BMD (aBMD) by dual-energy x-ray absorptiometry. Vertebral trabecular bone texture was analyzed using T1-weighted MRIs. A gray level co-occurrence matrix was used to characterize the distribution and spatial organization of voxelar intensities and derive the following texture features: contrast (variability), entropy (disorder), angular second moment (ASM; uniformity), and inverse difference moment (IDM; local homogeneity).ResultsAmong 46 patients (mean age 64, 54% women), lower peripheral vBMD and worse trabecular microarchitecture by HRpQCT were associated with greater texture heterogeneity by MRI—higher contrast and entropy (r ∼ −0.3 to 0.4, P < .05), lower ASM and IDM (r ∼ +0.3 to 0.4, P < .05). Lower spine vBMD by QCT was associated with higher contrast and entropy (r ∼ −0.5, P < .001), lower ASM and IDM (r ∼ +0.5, P < .001). Relationships with aBMD were less pronounced.ConclusionMRI-based measurements of trabecular bone texture relate to vBMD and microarchitecture, suggesting that this method reflects underlying microstructural properties of trabecular bone. Further investigation is required to validate this methodology, which could greatly improve identification of patients with skeletal fragility.

Objective The normal canine supraspinatus tendon has properties commonly attributed to damage such as core hyperintensity and increased width. Little is published regarding the normal tendon, including how senescent changes and sex differences may affect the appearance. Conventional magnetic resonance imaging (MRI) techniques provide subjective analysis of tendons based on observer assessment of signal intensity and appearance. Quantitative MRI (qMRI) techniques such as T2 mapping provide an objective comparison of collagen orientation with analysis of a decay constant, T2. This study investigates age and sex related changes in the canine supraspinatus tendon using the qMRI technique of T2 mapping. Study Design In this study, 34 tendons of clinically sound male and female dogs (0.6–13 years) were imaged using qMRI T2 mapping techniques. Sagittal plane T2 maps of the supraspinatus tendon were depth-normalized, and profiles compared using two separate four-parameter logistic equations describing T2 mapping profiles as sigmoidal curves. Combined parameters evaluated included range of T2 values, curve steepness, vertical curve shift, lower bound of T2, upper bound of T2 and horizontal curve shift. Results A significant reduction in the most central portion of the supraspinatus tendon was found for every increased year in age (−1.56 ± 0.47 milliseconds [−2.56, −0.56, p = 0.004]). No significant difference in curve parameters was found between sexes. Conclusion The reduction in T2 with age suggests a senescent change may be anticipated with the canine supraspinatus tendon.

The infrapatellar fat pad (IPFP) has been implicated as a source of postoperative knee pain. Imaging the IPFP is challenging in patients with total knee arthroplasty (TKA) due to metallic susceptibility artifact. Multi-Acquisition Variable-Resonance Image Combination (MAVRIC)-based T2 Mapping has been developed to mitigate this artifact and can generate quantitative T2 data. Objectives of this study were to (1) measure T2 values of the IPFP in patients with TKAs using a MAVRIC based T2 mapping technique and (2) determine if IPFP T2 values are related to the degree of fat pad scarring or clinical magnetic resonance imaging (MRI) findings. Twenty-eight subjects (10 males, 18 females, Age: 66 + 7.2 years [Mean ± standard deviations]) undergoing clinical MRIs were sequentially recruited. Morphological imaging and quantitative T2 mapping sequences were performed on a clinical 1.5 T scanner. The morphologic images were graded for the presence and severity of fat pad scarring and clinical outcomes. T2 values were calculated in the total fat pad volume, a normal regions of interest (ROI), and an abnormal ROI. T2 values were shortened in the total IPFP volume (p = 0.001) and within abnormal regions (p = 0.003) in subjects with more severe IPFP scarring. The difference between T2 values in normal-abnormal regions was greater in subjects with severe versus no scarring (+1426.1%, p = 0.008). T2 values were elevated in patients with MRI findings of osteolysis (+32.3%, p = 0.02). These findings indicate that MAVRIC-based T2 Mapping may be used as a quantitative biomarker of postoperative IPFP scarring in individuals following TKA.

Diffusion-weighted imaging (DWI) provides quantitative measurement of random water displacement in tissue as calculated by the apparent diffusion coefficient (ADC). While heavily utilized in stroke and oncology applications, DWI is a promising tool to map microstructural changes in musculoskeletal applications including evaluation of synovial reactions resulting from total hip arthroplasty (THA). One major challenge facing the application of DWI in THA is the significant artifacts related to the conventional echo-planar imaging (EPI) readout used. Multispectral imaging (MSI) techniques, including the multiacquisition with variable resonance image combination (MAVRIC), have been shown to effectively reduce metallic susceptibility artifacts around total joint replacements to render clinically useful images. Recently, a 2D periodically rotated overlapping parallel line with enhanced reconstruction (PROPELLER) FSE acquisition that incorporates a diffusion preparation pulse with 2D-MAVRIC has been developed to mitigate both distortion and dropout artifacts. While there have been some preliminary assessments of DWI-MAVRIC, the repeatability of DWI-MAVRIC and the effects of key parameters, such as the number of spectral bins, are unknown.To evaluate the quantitative accuracy of DWI-MAVRIC as compared to conventional diffusion sequences.A diffusion phantom with different reference diffusivities (ADC = 113-1123 μmDWI-MAVRIC had excellent correlation to reference values but at reduced linearity (r = 1.00, slope = 0.91-0.94) as compared to DWI-EPI (r = 1.00, slope = 0.99-1.01). A greater than 5% ADC bias was observed at the lowest ADC values, predominantly in the DWI-MAVRIC scans. ADC values did not vary with DWI-MAVRIC parameters. DWI-EPI acquisitions had intraday, interday, and interscanner repeatability of 3.18 μmDWI-MAVRIC provides good linearity with respect to reference values and good intra- and interday repeatability.

Background The ability to utilize magnetic resonance imaging (MRI) to assess bony fixation in 3 dimensions may allow a better understanding of the implant design and bony integration. We hypothesized that a new 3-dimensionally printed cementless highly porous acetabular component (Stryker Trident II TritaniumTM) would show better fixation than an earlier cup from the same manufacturer as assessed by the noninvasive technique of multispectral MRI. Methods Multiacquisition variable-resonance image combination selective metal suppression MRI was performed in 19 patients implanted with a new 3-dimensionally printed cup and 20 patients who had received a previous-generation cup from the same manufacturer at 1-year follow-up. Each cup was graded globally as well as by 9 specific zones. Integration grades were performed for each zone: 0, full bone integration; 1, fibrous membrane present; 2, osteolysis; and 3, fluid present. A mixed-effects logistic regression model was used to compare fixation between the 2 groups. Results All cups in both cohorts showed greater than 90% radiographically estimated global bony integration (3-dimensionally printed cups, 99.4%; regular cups 91.6%) with no osteolysis or fluid observed in any cup. The 3-dimensionally printed cup had 1 of 171 zones (0.6%) graded as fibrous membrane present, while the 2-dimensional group had 15 of 180 zones (8.3%) graded as fibrous. Of note, screw hole regions were omitted but may be read as fibrous membrane areas. Conclusion Using multiacquisition variable-resonance image combination selective MRI, our analysis showed greater biologic fixation and less fibrous membrane formation in the 3-dimensionally printed cups than the control group at 1-year follow-up.

The failure of total hip arthroplasty (THA) is commonly associated with the necrosis of the periprosthetic tissue. To date, there is no established method to non-invasively quantify the progression of such necrosis. Magnetic resonance imaging (MRI) of soft tissues near implants has undergone a recent renaissance due to the development of multi-spectral metal artifact reduction techniques. Advanced analysis of multi-spectral MRI has been shown capable of detecting small magnetism effects of metallic debris in periprosthetic tissue. The purpose of this study is to demonstrate the diagnostic utility of these MRI-based tissue magnetism signatures. Together with morphological MRI metrics such as synovial volume and thickness, these measurements are utilized as biomarkers to non-invasively detect soft-tissue necrosis in symptomatic THA patients (N = 78). All subjects underwent an advanced MRI scan before revision surgery and tissue biopsies utilized for necrosis grading. Statistical analyses demonstrated a weak, but significant positive correlation (p = 0.04) between MRI magnetism signatures and necrosis scores, while indicating no meaningful association between the latter and serum cobalt and chromium ion levels. Receiver operating characteristic (ROC) analyses were then performed based on uni- and multivariate logistic regression models utilizing the measured MRI biomarkers as predictors of severe necrosis. The area-under-the-curve (AUC) of the ROC plots for MRI biomarkers as combined predictors were found to be 0.70 and 0.84 for cross-validation and precision-recall tests, respectively.

The evaluation of the natural history prevalence of adverse local tissue reactions (ALTRs) using MRI has focused only on metal-on-metal (MoM) bearing surfaces without comparison to nonMoM bearing surfaces.To determine (1) the longitudinal changes and differences in blood metal ion levels in patients with hip resurfacing arthroplasty (HRA), ceramic-on-ceramic (CoC) THA, and metal-on-polyethylene (MoP) THA compared with those undergoing ceramic-on-polyethylene (CoP) THA; (2) how the longitudinal change of synovial reaction classification in patients with HRA, CoC THA, and MoP THA compares with those undergoing CoP THA, and whether there is an association between the presence of an ALTR or metallosis on MRI with corresponding patient-reported outcomes, or the presence of capsular dehiscence; and (3) differences in blood metal ion levels between patients undergoing HRA with an ALTR or metallosis on MRI and those with HRA without these conditions.Between March 2014 and February 2019, 22,723 patients underwent primary HRA and THA at one center. Patients received an HRA based on their desired athletic level after surgery and the presence of normal acetabular and proximal femoral bone morphology without osteopenia or osteoporosis. Two percent (342 of 22,723) of patients were contacted to participate, and 71% (243 of 342 hips in 206 patients) were enrolled for analysis at baseline. The patients underwent arthroplasty for degenerative joint disease, and 25 patients withdrew over the course of the study. We included patients who were more than 1 year postarthroplasty. All participants had an MRI examination and blood serum ion testing and completed a Hip Disability and Osteoarthritis Outcome Score survey annually for four years (baseline, year 1, year 2, year 3). Morphologic and susceptibility-reduced MR images were evaluated by a single radiologist not involved in the care of patients for the presence and classification of synovitis (Gwet AC1: 0.65 to 0.97), synovial thickness, and volume (coefficient of repeatability: 1.8 cm3). Linear mixed-effects models were used to compare the mean synovial thickness, synovial volume, and Hip Disability and Osteoarthritis Outcome Score subscales between bearing surfaces at each timepoint and within each bearing surface over time. Marginal Cox proportional hazards models were used to compare the time to and the risk of developing ALTR only, metallosis only, and ALTR or metallosis between bearing surfaces. All models were adjusted for age, sex, BMI, and length of implantation based on known confounders for hip arthroplasty. Adjustment for multiple comparisons was performed using the Dunnett-Hsu method.Patients with unilateral HRA had higher cobalt and chromium serum ion levels (baseline: 1.8 ± 0.8 ppb, year 1: 2.0 ± 1.5 ppb, year 2: 2.1 ± 1.2 ppb, year 3: 1.6 ± 0.7 ppb) than those with unilateral CoP bearings (baseline: 0.0 ± 0.1 ppb, year 1: 0.1 ± 0.3 ppb, year 2: 0.0 ± 0.2 ppb, year 3: 0.0 ± 0.0 ppb) at all timepoints (p0.001 for each time point). More patients who received an HRA developed ALTR or metallosis on MRI than did patients with CoP bearings (hazard ratio 4.8 [95% confidence interval 1.2 to 18.4]; p = 0.02). There was no association between the longitudinal change of synovial reaction to ALTR or metallosis on MRI with patient-reported outcomes. In addition, there was no association between the presence of dehiscence at baseline and the subsequent development of ALTR or metallosis, as seen on MRI. There were elevated cobalt (4.7 ± 3.5 ppb) and chromium (4.7 ± 2.6 ppb) serum levels in patients with unilateral HRA who had an ALTR or metallosis present on MRI at year 1 compared with patients without an ALTR or metallosis on MRI (cobalt: 1.8 ± 1.0 ppb, mean difference 4.7 ppb [95% CI 3.3 to 6.0]; p0.001; chromium: 2.3 ± 0.5 ppb, mean difference 3.6 ppb [95% CI 2.2 to 5.0]; p0.001) as well as for chromium at year 3 (3.9 ± 2.4 ppb versus 2.2 ± 1.1 ppb, mean difference 1.3 ppb [95% CI 0.3 to 2.4]; p = 0.01).We found a higher proportion of ALTR or metallosis on MRI in patients with HRA compared with patients with CoP, even when patient self-assessed symptomatology of those with an ALTR or metallosis on MRI was not different than the absence of these features. MRI detected ALTRs in high-function patients, emphasizing that an annual clinical assessment dependent on survey or blood ion testing alone may not detect soft tissue complications. The results of this study are in line with prior consensus recommendations of using MRI as part of a routine follow-up protocol for this patient population.Level III, therapeutic study.

The rat surgical anterior cruciate ligament transection (ACLT) model is commonly used to investigate intra-articular osteoarthritis (OA) therapies, and histological assessment is often the primary outcome measure. However, histological changes do not always correlate well with clinical outcomes. Therefore, this study evaluated functional outcomes in the rat surgical ACLT model and compared intra-articular injection volumes ranging from 20 to 50 μl. Unilateral ACLT was surgically induced and static weight-bearing, mechanical allodynia, motor function, and gait were assessed in four groups of male, Sprague-Dawley rats (n = 6 per group). Intra-articular injections of 20 µl Dulbecco's phosphate-buffered saline (DPBS), 50 µl DPBS, or 50 µl of synthetic biomimetic boundary lubricant were administered once weekly for 3 weeks postoperatively. Structural changes were evaluated histologically at 20 weeks. Rat cadaver knees were injected with 20, 30, 40, or 50 µl of gadolinium solutions and were imaged using magnetic resonance imaging (MRI). Static weight-bearing, mechanical allodynia, and gait parameters in ACLT groups revealed differences from baseline and naïve controls for 4 weeks post-ACLT; however, these differences did not persist beyond 6 weeks. Different intra-articular DPBS injection volumes did not result in functional or histological changes; however, peri-articular leakage was documented via MRI following 50, 40, and 30 µl but not 20 µl gadolinium injections. Statement of clinical significance: Differences in functional parameters were predominantly restricted to early, postoperative changes in the rat surgical ACLT model despite evidence of moderate histologic OA at 20 weeks. Injection volumes of 20-30 µl are more appropriate for investigating intra-articular therapies in the rat knee.

Patients with total knee arthroplasty (TKA) stiffness are commonly presumed to have arthrofibrosis though no specific test exists. In patients undergoing revision TKA, we asked the following question: (1) Do patients who are revised for stiffness display a synovial reaction on MRI that is different than patients revised for other reasons? (2) Do these patients have a different magnitude of polyethylene insert damage than patients revised for other reasons? and (3) Is the MRI synovial classification associated with polyethylene insert damage?Patients undergoing revision TKA for stiffness had a preoperative MRI performed, and the synovium was classified on MRI in a blinded fashion as arthrofibrosis, focal scarring, polymeric reaction, infection, or abnormal. At surgery, the polyethylene inserts were removed, and graded by 2 reviewers for total surface damage.Revision indication and MRI synovial classification were associated (P.0001), with a greater proportion of patients assigned an MRI classification of arthrofibrosis revised for arthrofibrosis and a greater proportion of patients assigned a polymeric classification revised for aseptic loosening. Patients assigned an MRI synovial classification of polymeric had the greatest damage to the tibial insert (P.0001), and patients revised for the clinical indication of aseptic loosening had the greatest damage to the tibial insert (P.0001).Synovial grading on MRI is strongly associated with revision indication and polyethylene insert damage. In patients with stiffness in the absence of another complication, MRI can be a helpful diagnostic adjuvant in confirming the diagnosis of stiffness.

Magnetic resonance imaging (MRI) is commonly used to evaluate the morphology of the knee in athletes with high‐knee impact; however, complex repeated loading of the joint can lead to biochemical and structural degeneration that occurs before visible morphological changes. In this study, we utilized multiparametric quantitative MRI to compare morphology and composition of articular cartilage and subchondral bone shape between young athletes with high‐knee impact (basketball players; n = 40) and non‐knee impact (swimmers; n = 25). We implemented voxel‐based relaxometry to register all cases to a single reference space and performed a localized compositional analysis of T 1ρ‐ and T 2‐relaxation times on a voxel‐by‐voxel basis. Additionally, statistical shape modeling was employed to extract differences in subchondral bone shape between the two groups. Evaluation of cartilage composition demonstrated a significant prolongation of relaxation times in the medial femoral and tibial compartments and in the posterolateral femur of basketball players in comparison to relaxation times in the same cartilage compartments of swimmers. The compositional analysis also showed depth‐dependent differences with prolongation of the superficial layer in basketball players. For subchondral bone shape, three total modes were found to be significantly different between groups and related to the relative sizes of the tibial plateaus, intercondylar eminences, and the curvature and concavity of the patellar lateral facet. In summary, this study identified several characteristics associated with a high‐knee impact which may expand our understanding of local degenerative patterns in this population.

BACKGROUND Few noninvasive methods are available for equine hoof wall evaluation. The highly organised wall structures and composition of proteoglycans and collagens may make this region amenable to quantitative MRI (qMRI) techniques of T1ρ and T2 mapping to identify pathology related to proteoglycan content and collagen organisation respectively. OBJECTIVE To establish normative T1ρ and T2 values of the equine hoof wall of 3-year-old Quarter Horses with histological comparison. STUDY DESIGN Cadaveric anatomical study. METHODS Six cadaveric left thoracic feet from 3-year-old racing Quarter Horses with no reported lameness were evaluated using T1ρ and T2 mapping. Mapping was performed at six regions of interest at the toe of each hoof including proximal and distal regions of the inner epidermis, stratum lamellatum and corium. Histology was evaluated for standard hoof morphology and proteoglycan staining. RESULTS T2 values of the stratum lamellatum and corium were similar (42.9 [95% CI: 41.6-44.2] ms and 44 [95% CI: 42.7-45.3] ms respectively), but both were significantly different to the inner epidermis (35.8 [95% CI: 34.5-37.1] ms, P

Purpose Due to host-mediated adverse reaction to metallic debris, there is an increasing need for noninvasive assessment of the soft tissue surrounding large joint arthroplasties. Quantitative T 2 mapping can be beneficial for tissue characterization and early diagnosis of tissue pathology but current T 2 mapping techniques lack the capability to image near metal hardware. A novel multi-spectral T 2 mapping technique is proposed to address this unmet need. Methods A T 2 mapping pulse sequence based on routinely implemented 3D multi-spectral imaging (3D-MSI) pulse sequences is described and demonstrated. The 3D-MSI pulse sequence is altered to acquire images at 2 echo times. Phantom and knee experiments were performed to assess the quantitative capabilities of the sequence in comparison to a commercially available T 2 mapping sequence. The technique was demonstrated for use within a clinical protocol in 2 total hip arthroplasty (THA) cases to assess T 2 variations within the periprosthetic joint space. Results The proposed multi-spectral T 2 mapping technique agreed, within experimental errors, with T 2 values derived from a commercially available clinical standard of care T 2 mapping sequence. The same level of agreement was observed in quantitative phantoms and in vivo experiments. In THA cases, the method was able to assess variations of T 2 within the synovial envelope immediately adjacent to implant interfaces. Conclusions The proposed 3D-MSI T 2 mapping sequence was successfully demonstrated in assessing tissue T 2 variations near metal implants.

BACKGROUND: Previous studies have utilized ultrashort echo (UTE) magnetic resonance imaging (MRI), and derived T2* maps, to evaluate structures with highly ordered collagen structures such as tendon. T2* maps may provide a noninvasive means to assess tendon damage and healing. This pilot study evaluated the longitudinal relationship of an induced mechanical strain on the patellar tendon with corresponding UTE T2* metrics, histologic and biomechanical evaluation at two post-operative time points. METHODS: A total of 27 patellar tendons in male Beagles were surgically subjected to stretching by a small diameter (SmD) or a large diameter (LgD) diameter rod to induce damage due to strain, and evaluated at 4- and 8-week intervals using quantitative MRI (qMRI), biomechanical testing, and histology. A separate set of 16 limbs were used as controls. RESULTS: The tendons experienced a 67% and 17% prolongation of short T2* values as compared to controls at 4 and 8 weeks post-operatively, respectively. Histologic analysis displayed a trend of increased collagen disruption at 4 weeks followed by presence of greater organization at 8 weeks. Biomechanical evaluation found a reduction of tendon modulus and failure strain at both time points, and an increase in cross-sectional area at 4 weeks as compared to controls. CONCLUSIONS: These findings display tendon healing in response to an imposed strain and present the utility of qMRI to evaluate longitudinal differences of patellar tendon T2* values in a model of induced subclinical tendon damage. The qMRI technique of UTE provides a means to non-invasively evaluate the healing process of a mechanically damaged tendon.

BACKGROUND: Injuries to the articular cartilage in the knee are common in jumping athletes, particularly high-level basketball players. Unfortunately, these are often diagnosed at a late stage of the disease process, after tissue loss has already occurred. PURPOSE/HYPOTHESIS: To evaluate longitudinal changes in knee articular cartilage and knee function in National Collegiate Athletic Association (NCAA) basketball players and their evolution over the competitive season and off-season. STUDY TYPE: Longitudinal, multisite cohort study. POPULATION: Thirty-two NCAA Division 1 athletes: 22 basketball players and 10 swimmers. FIELD STRENGTH/SEQUENCE: Bilateral magnetic resonance imaging (MRI) using a combined T(1ρ) and T(2) magnetization-prepared angle-modulated portioned k-space spoiled gradient-echo snapshots (MAPSS) sequence at 3T. ASSESSMENT: We calculated T(2) and T(1ρ) relaxation times to compare compositional cartilage changes between three timepoints: preseason 1, postseason 1, and preseason 2. Knee Osteoarthritis Outcome Scores (KOOS) were used to assess knee health. STATISTICAL TESTS: One-way variance model hypothesis test, general linear model, and chi-squared test. RESULTS: In the femoral articular cartilage of all athletes, we saw a global decrease in T(2) and T(1ρ) relaxation times during the competitive season (all P < 0.05) and an increase in T(2) and T(1ρ) relaxation times during the off-season (all P < 0.05). In the basketball players’ femoral cartilage, the anterior and central compartments respectively had the highest T(2) and T(1ρ) relaxation times following the competitive season and off-season. The basketball players had significantly lower KOOS measures in every domain compared with the swimmers: Pain (P < 0.05), Symptoms (P < 0.05), Function in Daily Living (P < 0.05), Function in Sport/Recreation (P < 0.05), and Quality of Life (P < 0.05). CONCLUSION: Our results indicate that T(2) and T(1ρ) MRI can detect significant seasonal changes in the articular cartilage of basketball players and that there are regional differences in the articular cartilage that are indicative of basketball-specific stress on the femoral cartilage. This study demonstrates the potential of quantitative MRI to monitor global and regional cartilage health in athletes at risk of developing cartilage problems. LEVEL OF EVIDENCE: 2 TECHNICAL EFFICACY STAGE: 2

The foot is a highly complex biomechanical system for which finite element (FE) modeling has been used to evaluate its loading environment. However, there is limited knowledge of first metatarsophalangeal (MTP) and first metatarsocuneiform (MTC) joint contact mechanics. Our goal was to develop a framework for FE modeling of the medial forefoot which could accurately predict experimental measurements of first MTP and first MTC joint loading. Simulations of planus and rectus foot types were conducted for midstance of gait. A custom-built force-controlled cadaveric test-rig was used to derive intracapsular pressure sensor measurements of contact pressure, force, and area during quasi-static loading. The FE model was driven under the same boundary and loading conditions as the cadaver. Mesh sensitivity analyses and best-fit calibrations of moduli for first MTP and first MTC joint cartilage were performed. Consistent with previous experimental research, a lower compressive modulus was best-fit to the first MTP compared to first MTC joint at 10 MPa and 20 MPa, respectively. Mean errors in contact pressures, forces, and areas were 24%, 4%, and 40% at the first MTP joint and 23%, 12%, and 19% at the first MTC joint, respectively. The present developmental framework may provide a basis for future modeling of first MTP and first MTC joint contact mechanics. This study acts as a precursor to validation of realistic physiological loading across gait to investigate joint loading, foot type biomechanics, and surgical interventions of the medial forefoot.

Context Many individuals at high risk for osteoporosis and fragility fracture are never screened by traditional methods. Opportunistic use of imaging obtained for other clinical purposes is required to foster identification of these patients. Objective The aim of this pilot study was to evaluate texture features as a measure of bone fragility, by comparing clinically acquired magnetic resonance imaging (MRI) scans from individuals with and without a history of fragility fracture. Methods This study retrospectively investigated 100 subjects who had lumbar spine MRI performed at our institution. Cases (n = 50) were postmenopausal women with osteoporosis and a confirmed history of fragility fracture. Controls (n = 50) were age- and race-matched postmenopausal women with no known fracture history. Trabecular bone from the lumbar vertebrae was segmented to create regions of interest within which a gray level co-occurrence matrix was used to quantify the distribution and spatial organization of voxel intensity. Heterogeneity in the trabecular bone texture was assessed by several features, including contrast (variability), entropy (disorder), and angular second moment (homogeneity). Results Texture analysis revealed that trabecular bone was more heterogeneous in fracture patients. Specifically, fracture patients had greater texture variability (+76% contrast; P = 0.005), greater disorder (+10% entropy; P = 0.005), and less homogeneity (−50% angular second moment; P = 0.005) compared with controls. Conclusions MRI-based textural analysis of trabecular bone discriminated between patients with known osteoporotic fractures and controls. Further investigation is required to validate this promising methodology, which could greatly expand the number of patients screened for skeletal fragility.

Background: Hip arthroplasty is increasingly prevalent, and early detection of complications can improve outcomes. Quantitative magnetic resonance imaging (qMRI) methods using multi-acquisition variable-resonance image combination (MAVRIC) may allow for the assessment of soft tissues in close proximity to hip arthroplasty devices. Question/Purposes: We sought to determine the clinical feasibility of MAVRIC-based T2 mapping as a qMRI approach for assessing synovial reactions in patients with a hip arthroplasty device. We hypothesized that there would be differences in T2 metrics by synovial type, clinical impression, and clinical findings related to synovitis. Methods: We conducted a cross-sectional study of 141 subjects with 171 hip arthroplasties with greater than 1 year post-implantation. We enrolled subjects who had had a primary total hip arthroplasty or hip resurfacing arthroplasty between May 2019 and March 2020, excluding those with a revision hip arthroplasty and those with standard safety contraindications for receiving an MRI. Institutional standard 2D fast spin echo (FSE), short-tau inversion recovery (STIR), and susceptibility-reduced MAVRIC morphological MR images were acquired for each hip and followed by a dual-echo acquisition MAVRIC T2 mapping sequence. Results: While 131 subjects (81%) were classified as having a “normal” synovial reaction, significantly longer T2 values were found for fluid synovial reactions compared with mixed reactions. In addition, subjects with synovial dehiscence and decompression present had T2 prolongation. Larger synovial volumes were found in subjects with low-signal intensity deposits. Conclusions: MAVRIC-based T2 mapping is clinically feasible and there are significant quantitative differences based on type of synovial reaction. Patients undergoing hip arthroscopy revision surgery will warrant comparison of T2 values with direct histologic assessment of a tissue sample obtained intraoperatively. The approach used in this study may be used for a quantitative evaluation and monitoring of soft tissues around metal implants.

Purpose The distinction between the dorsal intercarpal (DIC) and dorsal scaphotriquetral (DST) ligaments is imprecise and unclear in the literature. The purpose of our cadaveric study was to define the origins, insertions, and anatomic relationships of the dorsal wrist ligaments and relate these anatomic findings to magnetic resonance imaging (MRI) scans and histology. Methods The study included 17 unmatched fresh-frozen cadaveric specimens (7 male and 10 female), with a mean age of 67.1 years (range, 48–86 years). Wrists with arthritis or carpal malalignment were excluded. Ligaments were dissected and insertion sites were recorded in the radioulnar (width) and proximodistal (length) dimensions, centered at the midpoints of the insertion. Three cadaveric specimens underwent a histologic analysis to demonstrate ligament composition and insertion sites. Three additional cadavers underwent MRI, from which 3-dimensional models were built to model ligament topography. Results The conjoined triquetral insertion of the DIC, DST, and dorsal radiocarpal (DRC) measured 88.5 ± 6.4 mm2. In each specimen, there were 2 distinct deep and superficial components of intercarpal fibers. The deep component inserted on the lunate with an area of 59.0 ± 5.0 mm2. The deep and superficial components diverged as they coursed radially. The superficial component proceeded to the scaphoid ridge, trapezium, and trapezoid, whereas the deep component inserted on the proximal row. The deep fibers blended distally from their lunate insertion with the DST, forming a robust, 2.9 ± 0.8-mm wide extension over the dorsal capitate. The DRC inserted on the lunate, proximal to the DIC and DST insertions, with an area of 23.9 ± 5.4 mm2. Conclusions The dorsal ligament complex forms a firm link across the proximal carpal row and the DST provides extension of the proximal row over the capitate. Clinical relevance This information can guide surgeons while performing a dorsal approach to the wrist and repairing traumatic ligament disruption.

3 TECHNICAL EFFICACY STAGE: 5 J. Magn. Reson. Imaging 2020;52:418-419.

Magnetic resonance imaging (MRI) has historically been avoided for the routine clinical evaluation of metal implants at many clinical centers due to the presence of artifact that creates in-plane and through-plane distortions and signal intensity voids in generated images. However, when the image acquisition parameters are appropriately modified and advanced multi-spectral pulse sequences are used, high-quality diagnostic images can be generated and may be used for diagnosing patients with suspected periprosthetic pathology. MRI provides superior soft-tissue contrast and excellent sensitivity for mobile water and is, therefore, a valuable tool in the evaluation of these patients, given the increasing prevalence of arthroplasty within the general population. Knowledge of expected normal postoperative appearance in patients with total hip arthroplasty, total knee arthroplasty, and total shoulder arthroplasty facilitates the detection of abnormal findings in this population, as does familiarity with common pathologic conditions encountered in the periprosthetic region. This review article will provide background information regarding the presence of image artifacts, methods to reduce the artifacts, and application of MRI at 1.5 T for evaluating common complications in subjects with total knee arthroplasty, total hip arthroplasty, and total shoulder arthroplasty.

Background: Early intervention with mesenchymal stem cells (MSCs) after articular trauma has the potential to limit progression of focal lesions and prevent ongoing cartilage degeneration by modulating the joint environment and/or contributing to repair. Integrin α10β1 is the main collagen type II binding receptor on chondrocytes, and MSCs that are selected for high expression of the α10 subunit have improved chondrogenic potential. The ability of α10β1-selected (integrin α10high) MSCs to protect cartilage after injury has not been investigated. Purpose: To investigate integrin α10high MSCs to prevent posttraumatic osteoarthritis in an equine model of impact-induced talar injury. Study Design: Controlled laboratory study. Methods: Focal cartilage injuries were created on the tali of horses (2-5 years, n = 8) by using an impacting device equipped to measure impact stress. Joints were treated with 20 × 106 allogenic adipose-derived α10high MSCs or saline vehicle (control) 4 days after injury. Synovial fluid was collected serially and analyzed for protein content, cell counts, markers of inflammation (prostaglandin E2, tumor necrosis factor α) and collagen homeostasis (procollagen II C-propeptide, collagen type II cleavage product), and glycosaminoglycan content. Second-look arthroscopy was performed at 6 weeks, and horses were euthanized at 6 months. Joints were imaged with radiographs and quantitative 3-T magnetic resonance imaging. Postmortem examinations were performed, and India ink was applied to the talar articular surface to identify areas of cartilage fibrillation. Synovial membrane and osteochondral histology was performed, and immunohistochemistry was used to assess type I and II collagen and lubricin. A mixed effect model with Tukey post hoc and linear contrasts or paired t tests were used, as appropriate. Results: Integrin α10high MSC-treated joints had less subchondral bone sclerosis on radiographs ( P = .04) and histology ( P = .006) and less cartilage fibrillation ( P = .04) as compared with control joints. On gross pathology, less India ink adhered to impact sites in treated joints than in controls, which may be explained by the finding of more prominent lubricin immunostaining in treated joints. Prostaglandin E2 concentration in synovial fluid and mononuclear cell synovial infiltrate were increased in treated joints, suggesting possible immunomodulation by integrin α10high MSCs. Conclusion: Intra-articular administration of integrin α10high MSCs is safe, and evidence suggests that the cells mitigate the effects of joint trauma. Clinical Relevance: This preclinical study indicates that intra-articular therapy with integrin α10high MSCs after joint trauma may be protective against posttraumatic osteoarthritis.

Objective The purpose of this observational study was to establish normative data for the canine menisci using magnetic resonance imaging (MRI). Methods Ten fresh stifles from five normal male Beagles were obtained from animals with no known lameness. Conventional MRI and ultrashort echo time (UTE) imaging were performed and T2* values calculated. Five stifles were assessed histologically. Results The caudal horn of the medial meniscus had significantly prolonged T2* values (4.6 ± 1.27 ms; p = 0.002) as compared with the cranial horn of the medial meniscus (3.25 ± 0.86 ms), and the cranial (3.06 ± 0.54 ms) and caudal (3.64 ± 0.72 ms) horns of the lateral meniscus. Histology demonstrated normal tibial, femoral, interior and peripheral meniscal margins, and normal cellularity. The medial meniscus was noted to be obliquely oriented to the scan plane compared with the relatively perpendicular orientation of the lateral meniscus as compared with the bore of the magnet in a limb-extended orientation. Clinical Significance Variability of MRI UTE T2* is seen in the normal canine meniscus, with prolongation of the caudal horn, medial meniscus. Prolongation may be due to magic angle effects, as the medial meniscus of the Beagle is not perpendicular to the axis of the main magnetic field. Canine meniscal injury is a common sequela to cruciate tear, and detecting meniscal damage is important for directing patient care. The non-invasive quantitative MRI technique of UTE imaging can be used for the evaluation of collagen orientation, while acknowledging inherent regions of prolongation.

OBJECTIVE To characterize the MRI and histologic features of the supraspinatus tendon in nonlame dogs. ANIMALS 7 cadavers (14 shoulder joints) of nonlame 2-year-old sexually intact male Beagles. PROCEDURES Multiple MRI fluid-sensitive pulse sequences were obtained for both shoulder joints of each cadaver, and the thickness, volume, and signal intensity of each supraspinatus tendon were assessed. After MRI scanning was complete, the shoulder joints were processed for histologic examination. Tissue specimens were stained with various stains to determine tendon morphology and composition. Histologic and MRI findings were correlated and described. RESULTS All supraspinatus tendons had a trilaminar appearance on sagittal and transverse MRI images, which was characterized by a thick, hyperintense center layer (central substance) sandwiched between thin hypointense superficial and deep margins. The mean ± SD central substance-to-superficial margin and central substance-to-deep margin thickness ratios were 8.4 ± 1.2 and 9.0 ± 0.9, respectively; supraspinatus tendon-to-triceps brachii muscle signal intensity ratio was 1.3 ± 0.2; and tendon volume was 445 ± 20 mm3. The superficial and deep margins histologically resembled other tendons with highly ordered collagen fibers. The central substance was comprised of water-rich glycosaminoglycans interspersed among haphazardly arranged collagen bundles. CONCLUSIONS AND CLINICAL RELEVANCE Results indicated histologically normal canine supraspinatus tendons have a trilaminar appearance on MRI images. In dogs, a diagnosis of supraspinatus tendinosis should not be based solely on the tendon having a hyperintense signal on MRI images; other MRI evidence of shoulder joint disease and diagnostic findings are necessary to support such a diagnosis.

STUDY DESIGN A cohort study. OBJECTIVE The aim of this study was to evaluate the clinical utility of Zero-Echo-Time (ZTE) magnetic resonance imaging (MRI) for the assessment of cervical neural foraminal stenosis (CNFS) through the comparison of inter-modality [computed tomography (CT) and ZTE-MRI] CNFS grade severity agreements. SUMMARY OF BACKGROUND DATA Conventional MRI limited in its ability to provide direct visualization of cortical bone. The highly organized tissue structure of cortical bone results in very short T2 values that preclude acquisition of sufficient signal intensity and positive image contrast. ZTE imaging permits visualization of tissues with very short transverse relaxation times, and is capable of displaying images with CT-like contrast. METHODS Thirty-four subjects were recruited from a clinical cohort of patients undergoing standard of care MRI and CT imaging for evaluation of CNFS. Standard of care CT imaging studies were obtained on all subjects within 6 months of their ZTE-MRI acquisition (mean time interval: 25.3 ± 54.1 days; median: 0 days). ZTE-MRI and CT imaging studies were evaluated and severity of CNFS was graded on a scale from 0 to 5 (0 = none; 5 = severe). Weighted-kappa statistics were used to assess agreement between ZTE and CT grades of CNFS on both sides (right and left) of each motion segment. Ordinal logistic mixed-effects regression analyses evaluated the effects of inter-modality position differences (flexion-extension curvature) on inter-modality differences in CNFS grade. RESULTS Substantial agreement (κ = 0.72) was found between ZTE- and CT-based grades of CNFS. Significant inter-modality differences in cervical spine curvature were found for all motion segments, except C2-3 and C3-4 (P

Background Several previous studies have described broad histologic classifications of peri-prosthetic reactions that likely reflect the underlying mechanism of arthroplasty failure; however, a consensus has not yet been reached about the relative importance of individual observations. Question/Purpose The purpose of this study was to evaluate the inter-examiner repeatability of commonly used histopathologic grading methods, and to determine the utility of assigning a more simple, global categorization in patients undergoing revision THA surgery of implants with a variety of bearing combinations. Methods Between March 2013 and February 2020, a total of 2131 patients underwent revision hip arthroplasty surgery at a one center, of which 12% (248 of 2131) of patients were enrolled. Two pathologists independently reviewed microscope slides of periprosthetic tissue from these patients, of which 425 slides (229 hips, 222 subjects) were reviewed by both pathologists. Separate slides were used for a priori training of the pathologists. Slides were evaluated with the Campbell Aseptic Lymphocyte-dominant Vasculitis-Associated Lesion (ALVAL) score, the Oxford ALVAL score as modified by Grammatopolous, the Fujishiro and Natu scores, and a proposed simplified pattern classification, similar to that of Krenn et al., that incorporates individual factors of these existing scoring methods and was previously shown to correspond to Magnetic Resonance Imaging findings. Inter-rater agreement was assessed using Gwet’s AC1 and AC2 coefficients and correspondence analysis was used to examine associations between individual factors of prior scoring methods with the proposed major pattern. Results Almost perfect inter-rater repeatability (Gwet’s AC2 > 0.8) was found for 71% (15/21) of the individual factors, and substantial interrater agreement was found for the proposed major overall pattern (Gwet’s AC1: 0.80, 95%CI: 0.72–0.85). Correspondence analysis was able to explain 89–91% of data variability and was able to identify individual features not commonly associated with a major pattern, but discriminatory of the major pattern, such as “Lymph Cuff Thickness 0.25–0.5″ with ALVAL. Conclusion In contrast to prior examinations, excellent interrater agreement was found that may be attributable to a priori training of raters with a test set of slides or difficulty of interpreting grading criteria. The proposed simplified major pattern classification may facilitate evaluation of histopathologic tissue samples.

PURPOSE The presence of metallic debris near total hip arthroplasty can have a significant impact on longitudinal patient management. Methods for magnetic resonance imaging-based quantification of metallic debris near painful total hip replacements are described and applied to cohorts of symptomatic and control subject cases. METHODS A combination of metal artifact reduction, off-resonance mapping, off-resonance background removal, and spatial clustering methods are utilized to quantify off-resonance signatures in cases of suspected metallosis. These methods are applied to a cohort of symptomatic hip arthroplasties composed of cobalt-chromium alloys. Magnetostatic simulations and theoretical principles are used to illuminate the potential sources of the measured off-resonance effects. Reported metrics from histological tissue assays extracted during surgical revision procedures are also correlated with the proposed magnetic resonance imaging-based quantification results. RESULTS The presented methods identified quantifiable metallosis signatures in more than 70% of the symptomatic and none of the control cases. Preliminary correlations of the MR data with direct histological evaluation of retrieved tissue samples indicate that the observed off-resonance effect may be related to tissue necrosis. CONCLUSIONS Magnetostatic simulations, theoretical principles, and preliminary histological trends suggest that disassociated cobalt is the source of the observed off-resonance signature. Magn Reson Med 79:1628-1637, 2018. © 2017 International Society for Magnetic Resonance in Medicine.

Injury to the meniscus of the knee has been implicated as a significant risk factor for the subsequent development of osteoarthritis, but the mechanisms of joint degeneration are unclear. Our objective was to develop a clinically applicable methodology to evaluate the relationship of joint contact mechanics at the time of surgery to biological changes of articular cartilage as a function of time following surgery. A series of pre-, intra-, and post-operative protocols were developed which utilized electronic sensors for the direct measurement of contact mechanics, and advanced imaging to assess cartilage health. The tests were applied to a pilot cohort of young active patients undergoing meniscus allograft transplantation. Our study demonstrated significant variability across patients in terms of contact area and peak contact stress, both before and after transplantation. Nonetheless, the majority of patients exhibited decreased peak contact stress and increased contact area after graft implantation. MR scans at 3-6 months showed decreased T1ρ values in tibial articular cartilage, suggesting an increase in proteoglycan content or concomitant decrease in water content. Prolongation of T2 values was found primarily within the central, cartilage-cartilage contact region of the tibial plateau suggested disruption of the collagen network. Minimal differences were found in cartilage thickness over the short time frame of this preliminary study. With longer clinical follow-up, our platform of clinical tests can be used to better understand the patient-specific mechanical factors that are related to increased risk of OA after meniscus injury and surgery. © 2017 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 35:600-611, 2017.

Over one million total joint replacement surgeries were performed in the US in 2013 alone, and this number is expected to more than double by 2030. Traditional imaging techniques for postoperative evaluation of implanted devices, such as radiography, computerized tomography, or ultrasound, utilize ionizing radiation, suffer from beam hardening artifact, or lack the inherent high contrast necessary to adequately evaluate soft tissues around the implants, respectively. Magnetic resonance imaging (MRI), due to its ability to generate multiplanar, high-contrast images without the use of ionizing radiation is ideal for evaluating periprosthetic soft tissues but has traditionally suffered from in-plane and through-plane data misregistration due to the magnetic susceptibility of implanted materials. A recent renaissance in the interest of imaging near arthroplasty and implanted orthopedic hardware has led to the development of new techniques that help to mitigate the effects of magnetic susceptibility. This article describes the challenges of performing imaging near implanted orthopedic hardware, how to generate clinically interpretable images when imaging near implanted devices, and how the images may be interpreted for clinical use. We will also describe current developments of utilizing MRI to evaluate implanted orthopedic hardware. Level of Evidence: 3 J. Magn. Reson. Imaging 2017

Background: Femoroacetabular impingement syndrome (FAIS) is a common disorder of the hip resulting in groin pain and ultimately osteoarthritis. Radiologic assessment of FAI morphologies, which may present with overlapping radiologic features of hip dysplasia, often requires the use of computed tomography (CT) for evaluation of osseous abnormality, owing to the difficulty of direct visualization of cortical and subchondral bone with conventional magnetic resonance imaging (MRI). The use of a zero echo time (ZTE) MRI pulse sequence may obviate the need for CT by rendering bone directly from MRI. Purpose/Hypothesis: The purpose was to explore the application of ZTE MRI to the assessment of osseous FAI and dysplasia morphologies of the hip. It was hypothesized that angular measurements from ZTE images would show significant agreement with measurements obtained from CT images. Study Design: Cohort study (diagnosis); Level of evidence, 2. Methods: Thirty-eight hips from 23 patients were imaged with ZTE MRI and CT. Clinically relevant angular measurements of hip morphology were made in both modalities and compared to assess agreement. Measurements included coronal and sagittal center-edge angles, femoral neck-shaft angle, acetabular version (at 1-, 2-, and 3-o’clock positions), Tönnis angle, alpha angle, and modified-beta angle. Interrater agreement was assessed for a subset of 10 hips by 2 raters. Intermodal agreement was assessed on the complete cohort and a single rater. Results: Interrater agreement was demonstrated in both CT and ZTE, with intraclass correlation coefficient values ranging from 0.636 to 0.990 for ZTE and 0.747 to 0.983 for CT, indicating “good” to “excellent” agreement. Intermodal agreement was also shown to be significant, with intraclass correlation coefficients ranging from 0.618 to 0.904. Conclusion: Significant agreement of angular measurements for hip morphology exists between ZTE MRI and CT imaging. ZTE MRI may be an effective method to quantitatively evaluate osseous hip morphology.

Implant loosening is a common cause of reoperation after THA. Plain radiographs have been the default modality to evaluate loosening, although radiographs provide a relatively insensitive assessment of integration; cross-sectional modalities may provide a more detailed evaluation but traditionally have suffered from metal-related artifacts. We sought to determine whether MRI is capable of reliably detecting operatively confirmed component loosening in patients after hip arthroplasty.(1) Is assessing implant integration using MRI (with multiacquisition variable resonance image combination, [MAVRIC]) repeatable between readers? (2) What is the sensitivity and specificity of MRI with MAVRIC to evaluate component loosening, using intraoperative assessment as a gold standard? (3) How does the sensitivity and specificity of MRI with MAVRIC for surgically confirmed component loosening compare with those of radiographs?Between 2012 and 2017, 2582 THAs underwent revision at one institution. Of those, 219 had a preoperative MRI with MAVRIC. During that period, the most common indication for obtaining an MRI was evaluation of potential adverse local tissue reaction. The surgeons' decision to proceed with revision was based on their overall assessment of clinical, imaging, and laboratory findings, with MRI findings cited as contributing to the decision to revise commonly occurring in the setting of recalled implants. Of the THAs that underwent MRI, 212 were included in this study, while seven were excluded due to equivocal operative notes (5) and excessively poor quality MRI (2). MRI was performed at 1.5T using a standardized arthroplasty imaging protocol, including MARS (metal artifact reduction sequencing) and MAVRIC techniques. Two independent musculoskeletal fellowship-trained readers (one with 26 and one with 5 years of experience) blinded to operative findings scored a subset of 57 hips for implant integration based on Gruen zone and component loosening (defined as complete circumferential loss of integration around a component) to evaluate interobserver reliability. A third investigator blinded to imaging findings reviewed operative notes for details on the surgeon's assessment of intraoperative loosening.Gwet's agreement coefficients (AC) were used to describe interobserver agreement; these are similar to Cohen's kappa but are more resistant to certain paradoxes, such as unexpectedly low values in the setting of very high or low trait prevalence, or good agreement between readers on marginal counts. Almost perfect interobserver agreement (AC2 = 0.81-1.0) was demonstrated for all acetabular zones and all femoral Gruen zones on MRI, while perfect (AC1 = 1.0) agreement was demonstrated for the overall assessment of acetabular component loosening and near perfect agreement was shown for the assessment of femoral component loosening (AC1 = 0.98). MRI demonstrated a sensitivity and specificity of 83% (95% CI, 65-96) and 98% (95% CI, 97-100), respectively, for acetabular component loosening and 75% (95% CI, 55-94) and 100% (95% CI, 100-100), respectively, for femoral component loosening. Radiographs demonstrated a sensitivity and specificity of 26% (95% CI, 12-47) and 100% (95% CI, 96-100), respectively, for acetabular component loosening and 20% (95% CI, 9-47) and 100% (95% CI, 100-100), respectively, for femoral component loosening.MRI may provide a repeatable assessment of implant integration and demonstrated greater sensitivity than radiographs for surgically confirmed implant loosening in patients undergoing revision THA at a single institution. Additional multi-institutional studies may provide more insight into the generalizability of these findings.Level III, diagnostic study.

OBJECTIVE. The objective of our study was to compare the quality and diagnostic utility of the following three metal artifact reduction sequences in evaluating hip arthroplasties: conventional multiacquisition variable-resonance image combination selective (MAVRIC SL), isotropic MAVRIC SL, and reduced-TR isotropic MAVRIC SL. SUBJECTS AND METHODS. Ninety-three hip arthroplasties (85 total hip replacements and eight hip resurfacings [nine bilateral hips]) in 84 patients (38 men and 46 women; mean age ± SD, 69.1 ± 9.7 years old) were imaged and evaluated. A calibration scan determined the number of spectral bins needed for each implant, and isotropic and conventional MAVRIC SL images were acquired. Reduced-TR isotropic MAVRIC SL scans were acquired for 40 arthroplasties. Two board-certified radiologists blinded to MRI acquisition evaluated images for clinical and image quality features and compared images using a mixed-effects ordinal logistic regression model and odds ratios. Rater agreement was assessed with Gwet agreement coefficients. Scanning times were compared using mixed-effects linear regression. Significance was set at p < 0.05. RESULTS. Calibration scans decreased the number of bins needed (median, 12 bins; interquartile range, 10-16 bins). Isotropic MAVRIC SL (mean scanning time, 7 minutes 16 seconds; 95% CI, 7 minutes 7 seconds-7 minutes 25 seconds) acquisitions had the longest scanning time, and conventional (mean, 5 minutes 46 seconds; 95% CI, 5 minutes 37 seconds-5 minutes 55 seconds) and reduced-TR isotropic (5 minutes 28 seconds; 95% CI, 5 minutes 15 seconds-5 minutes 41 seconds) MAVRIC SL acquisitions had scanning times that were similar. Both isotropic and reduced-TR isotropic MAVRIC SL images showed decreased blurring and improved visualization of the synovium and periprosthetic bone compared with conventional MAVRIC SL images (p < 0.001). Isotropic MAVRIC SL acquisitions more effectively improved signal-to-noise ratio (SNR), visualization of the synovium and periprosthetic bone, and lesion conspicuity and decreased blurring compared with reduced-TR isotropic MAVRIC SL acquisitions (p < 0.032). CONCLUSION. Isotropic MAVRIC SL acquisitions improve SNR, conspicuity of lesions, and visualization of synovium and periprosthetic bone and decrease blurring compared with conventional MAVRIC SL acquisitions.

Background:Artificial meniscal scaffolds are being developed to prevent development of osteoarthritis after meniscectomy. Previously, it was reported that 3-dimensional (3D) anatomic scaffolds loaded with connective tissue growth factor (CTGF) and transforming growth factor β3 (TGF-β3) achieved meniscal regeneration in an ovine model. This was a relatively short-term study (3 months postoperative), and outcome analyses did not include magnetic resonance imaging (MRI).Purpose:To evaluate long-term outcome of meniscal replacement with growth factor–laden poly-ε-caprolactone (PCL) scaffolds.Study Design:Controlled laboratory study.Methods:Anatomically shaped ovine meniscal scaffolds were fabricated from PCL with a 3D printer based on MRI data. Skeletally mature sheep (N = 34) were randomly allocated to 3 groups: scaffold without growth factor (0-µg group), scaffold with CTGF microspheres (µS) (5 µg) + TGF-β3 µS (5 µg) (5-µg group), and scaffold with CTGF µS (10 µg) + TGF-β3 µS (10 µg) (10-µg group). Unilateral medial meniscal replacement was performed. Animals were euthanized at 6 or 12 months. Regenerated meniscus, articular cartilage status, and synovial reaction were evaluated quantitatively with gross inspection, histology, and MRI. Kruskal-Wallis and Dunn tests were used to compare the 3 groups.Results:Remnants of the PCL scaffold were evident in the 6-month specimens and were decreased but still present at 12 months in most animals. There were no significant differences among groups in gross inspection, histology, or MRI for either meniscal regeneration or articular cartilage protection. All experimental groups exhibited articular cartilage degeneration as compared with control (nonoperated). In terms of synovitis, there were no clear differences among groups, suggesting that growth factors did not increase inflammation and fibrosis. MRI revealed that meniscal extrusion was observed in most animals (82.7%).Conclusion:Previously, the combination of CTGF and TGF-β3 was shown to stimulate mesenchymal stem cells into a fibrochondrocyte lineage. CTGF and TGF-β3 did not aggravate synovitis, suggesting no adverse response to the combination of 3D-printed PCL scaffold combined with CTGF and TGF-β3. Further work will be required to improve scaffold fixation to avoid meniscal extrusion.Clinical Relevance:A significant advantage of this technique is the ability to print custom-fit scaffolds from MRI-generated templates. In addition, average-size menisci could be printed and available for off-the-shelf applications. Based on the 1-year duration of the study, the approach appears to be promising for meniscal regeneration in humans.

BACKGROUND: Implant loosening is a common cause of reoperation after THA. Plain radiographs have been the default modality to evaluate loosening, although radiographs provide a relatively insensitive assessment of integration; cross-sectional modalities may provide a more detailed evaluation but traditionally have suffered from metal-related artifacts. We sought to determine whether MRI is capable of reliably detecting operatively confirmed component loosening in patients after hip arthroplasty. QUESTIONS/PURPOSES: (1) Is assessing implant integration using MRI (with multiacquisition variable resonance image combination, [MAVRIC]) repeatable between readers? (2) What is the sensitivity and specificity of MRI with MAVRIC to evaluate component loosening, using intraoperative assessment as a gold standard? (3) How does the sensitivity and specificity of MRI with MAVRIC for surgically confirmed component loosening compare with those of radiographs? METHODS: Between 2012 and 2017, 2582 THAs underwent revision at one institution. Of those, 219 had a preoperative MRI with MAVRIC. During that period, the most common indication for obtaining an MRI was evaluation of potential adverse local tissue reaction. The surgeons’ decision to proceed with revision was based on their overall assessment of clinical, imaging, and laboratory findings, with MRI findings cited as contributing to the decision to revise commonly occurring in the setting of recalled implants. Of the THAs that underwent MRI, 212 were included in this study, while seven were excluded due to equivocal operative notes (5) and excessively poor quality MRI (2). MRI was performed at 1.5T using a standardized arthroplasty imaging protocol, including MARS (metal artifact reduction sequencing) and MAVRIC techniques. Two independent musculoskeletal fellowship-trained readers (one with 26 and one with 5 years of experience) blinded to operative findings scored a subset of 57 hips for implant integration based on Gruen zone and component loosening (defined as complete circumferential loss of integration around a component) to evaluate interobserver reliability. A third investigator blinded to imaging findings reviewed operative notes for details on the surgeon’s assessment of intraoperative loosening. RESULTS: Gwet’s agreement coefficients (AC) were used to describe interobserver agreement; these are similar to Cohen’s kappa but are more resistant to certain paradoxes, such as unexpectedly low values in the setting of very high or low trait prevalence, or good agreement between readers on marginal counts. Almost perfect interobserver agreement (AC(2) = 0.81–1.0) was demonstrated for all acetabular zones and all femoral Gruen zones on MRI, while perfect (AC(1) = 1.0) agreement was demonstrated for the overall assessment of acetabular component loosening and near perfect agreement was shown for the assessment of femoral component loosening (AC(1) = 0.98). MRI demonstrated a sensitivity and specificity of 83% (95% CI, 65–96) and 98% (95% CI, 97–100), respectively, for acetabular component loosening and 75% (95% CI, 55–94) and 100% (95% CI, 100–100), respectively, for femoral component loosening. Radiographs demonstrated a sensitivity and specificity of 26% (95% CI, 12–47) and 100% (95% CI, 96–100), respectively, for acetabular component loosening and 20% (95% CI, 9–47) and 100% (95% CI, 100–100), respectively, for femoral component loosening. CONCLUSION: MRI may provide a repeatable assessment of implant integration and demonstrated greater sensitivity than radiographs for surgically confirmed implant loosening in patients undergoing revision THA at a single institution. Additional multi-institutional studies may provide more insight into the generalizability of these findings. LEVEL OF EVIDENCE: Level III, diagnostic study.

ObjectiveTo evaluate a biphasic cartilage repair device (CRD) for feasibility of arthroscopic implantation, safety, biocompatibility, and efficacy for long-term repair of large osteochondral defects.MethodsThe CRD was press-fit into defects (10 mm diameter, 10 mm deep) created in the femoral trochlea of 12 horses. In the contralateral limb, 10 mm diameter full-thickness chondral defects were treated with microfracture (MFX). Radiographs were obtained pre- and postoperatively, and at 4, 12, and 24 months. Repeat arthroscopy was performed at 4 and 12 months. Gross assessment, histology, mechanical testing, and magnetic resonance imaging (MRI) were performed at 24 months.ResultsThe CRD was easily placed arthroscopically. There was no evidence of joint infection, inflammation, or degeneration. CRD-treated defects had significantly more sclerosis compared to MFX early ( P = 0.0006), but was not different at 24 months. CRD had better arthroscopic scores at 4 months compared to MFX ( P = 0.0069). At 24 months, there was no difference in repair tissue on histology or mechanical testing. Based on MRI, CRD repair tissue had less proteoglycan (deep P = 0.027, superficial P = 0.015) and less organized collagen (deep P = 0.028) compared to MFX. Cartilage surrounding MFX defects had more fissures compared to CRD.ConclusionThe repair tissue formed after CRD treatment of a large osteochondral lesion is fibrocartilage similar to that formed in simple chondral defects treated with MFX. The CRD can be easily placed arthroscopically, is safe, and biocompatible for 24 months. The CRD results in improved early arthroscopic repair scores and may limit fissure formation in adjacent cartilage.

Orthopedic trauma, such as anterior cruciate ligament (ACL) disruption, is a common source of osteoarthritis in the knee. Magnetic resonance imaging (MRI) is a non-invasive multi-planar imaging modality commonly used to evaluate hard and soft tissues of diarthrodial joints following traumatic injury. The contrast provided by generated images enables the evaluation of bone marrow lesions as well as delamination and degeneration of articular cartilage. We will provide background information about MRI signal generation and decay (T1 and T2 values), the utility of morphologic MRI, and the quantitative MRI techniques of T1ρ , T2 , and T2 * mapping, to evaluate subjects with traumatic knee injuries, such as ACL rupture. Additionally, we will provide information regarding the dGEMRIC, sodium, and gagCEST imaging techniques. Finally, the description and utility of newer post hoc analysis techniques, such as texture analysis, will be given. Continued development and refinement of these advanced MRI techniques will facilitate their clinical translation. © 2016 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 35:412-423, 2017.

PURPOSE: Due to host-mediated adverse reaction to metallic debris, there is an increasing need for noninvasive assessment of the soft tissue surrounding large joint arthroplasties. Quantitative T(2) mapping can be beneficial for tissue characterization and early diagnosis of tissue pathology but current T(2) mapping techniques lack the capability to image near metal hardware. A novel multi-spectral T(2) mapping technique is proposed to address this unmet need. METHODS: A T(2) mapping pulse sequence based on routinely implemented 3D multi-spectral imaging (3D-MSI) pulse sequences is described and demonstrated. The 3D- MSI pulse sequence is altered to acquire images at two echo times. Phantom and knee experiments were performed to assess the quantitative capabilities of the sequence in comparison to a commercially available T(2) mapping sequence. The technique was demonstrated for use within a clinical protocol in two total hip arthroplasty (THA) cases to assess T(2) variations within the periprosthetic joint space. RESULTS: The proposed multi-spectral T(2) mapping technique agreed, within experimental errors, with T(2) values derived from a commercially available clinical standard of care T(2) mapping sequence. The same level of agreement was observed in quantitative phantoms and in-vivo experiments. In THA cases, the method was able to assess variations of T(2) within the synovial envelope immediately adjacent to implant interfaces. CONCLUSION: The proposed 3D-MSI T(2) mapping sequence was successfully demonstrated in assessing tissue T(2) variations near metal implants.

BACKGROUND: MRI is predictive of adverse local tissue reactions (ALTRs) after THA but how MRI directly relates to implant surface wear, fretting, and trunnion corrosion at different articulations between implant components remains unclear. MRI generates high-contrast images to display soft tissues around arthroplasty and may provide a surgeon the means to distinguish and differentiate host-related synovial patterns as a response to either polyethylene wear or metal wear and corrosion products. QUESTIONS/PURPOSES: The purposes of this study were (1) to correlate findings from MRI in patients who have undergone THA with direct assessment of implant wear, corrosion, and fretting from retrieved components; and (2) to distinguish the unique synovial responses on MRI in patients who have undergone THA based on bearing materials. METHODS: In this prospective study, patients undergoing THA (181 patients, 187 hips) with metal-on-metal (MoM), hip resurfacing (HRA), metal-on-polyethylene (MoP), ceramic-on-polyethylene, ceramic-on-ceramic, or modular neck designs having revision surgery (between October 2013 and June 2017) underwent preoperative MRI. A single reader blinded to the bearing surface made an assessment of the synovial response (Gwet’s AC1, 0.65-0.97); these data were compared with semiquantitative histology of tissue samples by a single reader (Gwet’s AC1, 0.92) and semiquantitative wear, corrosion, and fretting analysis of retrieved components using Goldberg scoring (Gwet’s AC1, 0.60-0.79). Direct noncontact measurements of implant wear were also made. Correlations and analyses of variance were used to assess associations between metrics and differences by implant type, respectively. RESULTS: Correlations were found between MRI synovial thickness with severity of fretting and corrosion damage of the female head-neck trunnion of femoral stems in modular designs (ρ = 0.26 [95% confidence interval {CI}, 0.12-0.39]; p = 0.015, n = 185) and ALTR grade and volumetric wear in MoM bearings (ρ = 0.93 [95% CI, 0.72-0.98]; p < 0.001, n = 10). MRI synovial thickness was highest in patients identified with aseptic lymphocyte-dominated vasculitis-associated lesions and diffuse tissue necrosis. On MRI, MoP hips demonstrated a distinct polymeric synovial response, whereas HRA, MoM, and modular hips more commonly demonstrated ALTR. Hips classified as having a polymeric synovial response on MRI had a greater number of particles present in tissue samples. CONCLUSIONS: In this study, we demonstrated that MRI of THA can distinguish synovial responses that reflect the bearing type of the implanted THA and correlate to direct measurements of implant wear, corrosion, and fretting and histologic assessment of wear particles in periprosthetic tissues. MRI provides a means of direct, noninvasive visualization of the host-generated synovial response. Patients presenting with painful arthroplasties may be evaluated for the cause of their discomfort, specifically highlighting any concerning synovial reactions that would warrant more prompt surgical intervention. Future studies would benefit from a prospective evaluation of different implants to assess the natural longitudinal history of arthroplasty complications, including the development and prevalence of ALTR across bearing constructs. LEVEL OF EVIDENCE: Level III, diagnostic study.

Objectives The purpose of this study was to evaluate regional differences of canine stifle articular cartilage using the quantitative magnetic resonance imaging (MRI) technique of T2 mapping. Methods Fourteen stifle joints from seven juvenile male Beagle dogs with no evidence or prior history of pelvic limb lameness were imaged ex vivo using standard of care fast spin echo MRI and quantitative T2 mapping protocols. Regions of interest were compared between the femoral, patellar and tibial cartilages, as well as between the lateral and medial femorotibial compartments. Limbs were processed for histology with standard stains to confirm normal cartilage. Results The average T2 value of femoral trochlear cartilage (37.5 ± 2.3 ms) was significantly prolonged (p Clinical Significance As seen in other species, regional differences in T2 values of the canine stifle joint are identified. Understanding normal regions of anticipated prolongation in different joint compartments is needed when using quantitative imaging in models of canine osteoarthritis.

It has been suggested that the extent and location of cartilage deformation within a joint under compressive loading may be predictive of predisposition to further degeneration. To explore this relationship in detail requires the quantification of cartilage deformation under controlled loads on a per-patient basis in a longitudinal manner. Our objectives were (1) to design a device capable of applying controllable axial loads while ensuring repeatable within-patient tibiofemoral positioning during magnetic resonance imaging (MRI) scans and (2) to determine the duration for which load should be maintained prior to the image acquisition, for a reproducible measurement of cartilage deformation, within the restraints of a clinical setting. A displacement control loading device was manufactured from MRI-compatible materials and tested on four volunteers for the following five scans: an unloaded scan, two repeat immediate scans which were started immediately after the application of 50% body weight, and two repeat delayed scans started 12 min after load application. Outcome measures included within-patient changes in tibiofemoral position and cartilage deformation between repeat loaded scans. The differences in tibiofemoral position between repeat loaded scans were

Advances in current clinical modalities, including magnetic resonance imaging and computed tomography, allow for earlier diagnoses of cartilage damage that could mitigate progression to osteoarthritis. However, current imaging modalities do not detect submicrometer damage. Developments in in vivo or arthroscopic techniques, including optical coherence tomography, ultrasonography, bioelectricity including streaming potential measurement, noninvasive electroarthrography, and multiphoton microscopy can detect damage at an earlier time point, but they are limited by a lack of penetration and the ability to assess an entire joint. This article reviews current advancements in clinical and developing modalities that can aid in the early diagnosis of cartilage injury and facilitate studies of interventional therapeutics.

Meniscal implants have been developed in an attempt to provide pain relief and prevent pathological degeneration of articular cartilage. However, as yet there has been no systematic and comprehensive analysis of the effects of the meniscal design variables on meniscal function across a wide patient population, and there are no clear design criteria to ensure the functional performance of candidate meniscal implants. Our aim was to develop a statistically-augmented, experimentally-validated, computational platform to assess the effect of meniscal properties and patient variables on knee joint contact mechanics during the activity of walking. Our analysis used Finite Element Models (FEMs) that represented the geometry, kinematics as based on simulated gait and contact mechanics of three laboratory tested human cadaveric knees. The FEMs were subsequently programmed to represent prescribed meniscal variables (circumferential and radial/axial moduli - Ecm, Erm, stiffness of the meniscal attachments - Slpma, Slamp) and patient variables (varus/valgus alignment – VVA, and articular cartilage modulus - Ec). The contact mechanics data generated from the FEM runs were used as training data to a statistical interpolator which estimated joint contact data for untested configurations of input variables. Our data suggested that while Ecm and Erm of a meniscus are critical in determining knee joint mechanics in early and late stance (peak 1 and peak 3 of the gait cycle), for some knees that have greater laxity in the mid-stance phase of gait, the stiffness of the articular cartilage, Ec, can influence force distribution across the tibial plateau. We found that the medial meniscus plays a dominant load-carrying role in the early stance phase and less so in late stance, while the lateral meniscus distributes load throughout gait. Joint contact mechanics in the medial compartment are more sensitive to Ecm than those in the lateral compartment. Finally, throughout stance, varus-valgus alignment can overwhelm these relationships while the stiffness of meniscal attachments in the range studied have minimal effects on the knee joint mechanics. In summary, our statistically-augmented, computational platform allowed us to study how meniscal implant design variables (which can be controlled at the time of manufacture or implantation) interact with patient variables (which can be set in FEMs but cannot controlled in patient studies) to affect joint contact mechanics during the activity of simulated walking.